RANDOM PATTERN PROJECTOR deVeLOPing, CuSTOMizing And MAnufACTuRing innOVATiVe BeAM SHAPing SOLuTiOnS
Transcription
RANDOM PATTERN PROJECTOR deVeLOPing, CuSTOMizing And MAnufACTuRing innOVATiVe BeAM SHAPing SOLuTiOnS
Developing, customizing and manufacturing innovative beam shaping solutions RANDOM PATTERN PROJECTOR Structured lighting laser random dot matrix based on diffractive optic, in a self contained laser module for the most demanding industrial applications. 0 Up to 100,00 random dots Features Applications Industrial design 3D Machine Vision Etched in glass diffractive optic Movement detection Externally focusable Volume measurement High Pointing and Power stability ESD, Overvoltage & Over temperature protected Up to 2 year warranty What is RPP ? Random Pattern Projector (RPP) is a divergent dot matrix pattern of NxM pixels with a ratio of bright and dark pixels of approximately 10%. Each bright pixel is surrounded by at least 8 dark pixels with no contact between bright pixels. The bright pixels distribution is pseudo-random and the pattern is symmetric with respect to the center. Multiple laser projectors can be tiled to obtain a larger area while maintaining the same random pattern. Zoom of RPP pixels structured SPECIFICATIONS Specification Number of dots Operating Wavelength RPP1 Optional 4,400 <100,000 660 or 810nm 266 to 2000nm 10% <15% Aspect ratio 1:1 1:10 Field of view 20° x 20° <25° OPTICAL Density of dots >60% Total power in the “0” order <1% Pattern uniformity (except “0” order) <35% Bore sight (mrad) <3 mrad (collimated) Wavelength Drift approx 0.25 nm/ degC Pointing Stability <6 μrad/°C Rise/Fall time (usec) <5 Depth (%) 100 Input Impedance (Kohm) >10 Modulation Efficiency Intensity Modulation Linear (≈0.5-4VDC), OPTION: TTL Protections (Built in)ESD, Over voltage (up to 25 VDC), Over-temp Shutoff (>45 deg C) Warm up time < 2 minute Long term Power stability (8 hours) <+/- 3 % ELECTRICAL/ENVIRONMENTAL Operating Voltage Operating Current Working Temp Range 5+/- 0.5VDC , Option: 7-36 VDC <250mA, depending on diode Weight -10 to to +50 °C <0.25 Kg Power Supply Cable Belden PN: 9533, 18 inches with flying leads WarrantyUp to 2 year Focusing Options The focusing of the light pattern is very important parameter as it is directly proportional to the resolution one can attain for structured lighting applications. It is important to note the relationship between focus and depth of focus (i.e. Range where the thickness remains within 1.4 times minimum), the tighter the focus that can be attained the smaller the depth of focus. At Osela we provide many different focusing options giving you the flexibility to choose the one that best suits your application. 500 140 750 1000 Working distance long range [mm] 1250 1500 1750 2000 2250 2500 2750 600 100 500 Focus option A 80 400 60 300 40 200 500 50 150 750 200 1000 250 300 350 Working distance short range [mm] 400 Working distance long range [mm] 1250 1500 1750 2000 2250 45 450 2500 2750 100 500 3000 1800 1600 40 1400 35 1200 30 1000 25 20 800 Focus option A 600 15 Deptht of focus long range [mm] 20 100 Deptht of focus short range [mm] Smallest beam size 1/e2 long range [um] 700 120 Smallest beam size 1/e2 short range [um] 3000 800 400 10 200 5 0 0 100 125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500 Working distance short range [mm] Focus Option Smallest beam size Depth Of Field Focus axis beam size 1/e2) At exit of laser (mm) A 1 1 3.5 B 3.5x option A 12x Option A 1 C 0.5x option A 0.25x Option A 7.5 D 1.6x option A 2.5x Option A 2.2 Note on depth of focus: using the definition of depth of focus: range of positions where the spot size is smaller than √2 times the smallest beam size at working distance and removing the range behind the laser, there is a point where the function become linear and all focus options have the same slope. Limit of validity of figure 2 Option D: 2500mm Option B: 750mm. Behind this points the dept h of field is ~1.33*working distance for all options. Mechanical Specifications Standard 2.68 ±0.015 68.1 ±0.4 0.780 19.8 0.750 19.05 Separate Driver LED ADJUSTMENT POT (OPTION) 0.780 19.8 EXTERNAL FOCUS +0.000 -0.002 +0.00 -0.05 1.43 ±0.015 36.3 ±0.4 EXTERNAL FOCUS 0.750 +0.000 -0.002 19.0 +0.0 -0.1 CLAMPING AREA CLAMPING AREA 0.750 +0.000 -0.002 19.0 +0.0 -0.1 1.600 ±0.015 40.6 ±0.4 CABLE LENGTHS 18" STANDARD AND CUSTOM AVAILABLE CABLE LENGTHS 18" STANDARD AND CUSTOM AVAILABLE CABLE LENGTHS 6" STANDARD AND COSTOM AVAILABLE Ordering Code SL - XXX - Wavelength XXX - Diode Power X X - Electronic Focusing Option 660 50, 100, 130 S: Standard A 810 100, 150 RS: Reverse B T: TTL C RT: Reverse TTLD OSELA inc. 218 Brunswick Blvd., Pointe-Claire, Quebec H9R 1A6 Canada [email protected] 514 426.2262 XX - RPP type RPP1 XXXXX Option SD: Separate driver 24V: 7-36V oselainc.com