IPC ALPINE SKIING/SNOWBOARD EQUIPMENT RULE BOOK 2013/2014 Season

IPC ALPINE SKIING/SNOWBOARD
EQUIPMENT RULE BOOK
2013/2014 Season
valid until 1 October 2014
IPC Alpine Skiing reserves the right to further interpret and/or supplement these
Rules in order to help ensure that their spirit and purposes are respected.
Competition equipment used for IPC Alpine Skiing is regulated according to the FIS
Competition Equipment Specifications.
Competition equipment
The term „competition equipment“ implies all items of equipment used by athletes
in competitive skiing, including clothing and implements that serve a technical
function.
The entire competition equipment forms a functional unit.
In this connection the following points must be observed:

the principle of safety

the principle of fairness
Competition implements Competition implements refer to equipment which fulfil essential functions during
the competition but which can be separated from the actual competition. Examples: skis, bindings, boots, poles, clothing, helmets, ski goggles.
Additional equipment (accessories)
Additional competition equipment (accessories) are those components or
implements which exert an influence on the technical function of the competition
equipment and which are attached directly to the equipment by means of
recognised fastenings. Such accessories do not perform essential functions during
the competition. Example: para-blocks, plastic tip covers, additional weights, back protectors.
Protected equipment not defined in the above rules are obliged to sign the
IPCAS Waiver ACCEPTANCE OF RISK AND RELEASE OF CLAIMS, to participate
in IPCAS competitions.
Athletes/Guides must use equipment appropriate for their gender.
IPC Alpine Skiing/Snowboard Equipment Rule Book
2
Alpine Racing Skis
Definition
Skis, predominantly for use in Downhill, Slalom, Giant Slalom and Super- G, racing
on suitable terrain and utilising the force of gravity. In order to allow transmission of
lateral forces, the edges of the running surface of the ski are made mainly of a hard
material resistant to wear and tear.
Alpine racing skis that meet the new FIS Specifications as of 2012-13 are approved
for use in IPCAS competitions. (Refer to FIS specifications for competition
equipment section 1.2)
In addition the equipment specifications as defined below are valid through the
end of Season 2013/2014.
Ski length
Minimum length, "developed" length (unwound length) in accordance with ISO
Norm including a measurement tolerance
Profile Width
The minimum width; of the running surface (no tolerance).
Downhill
For all Downhill events, the IPC AS STC will allow the use of both Super-G and
Downhill skis that meets the requirements for length, radius and profile width
mentioned below:
Ski length
Women (all IPCAS Categories):
Minimum 200 cm / -1 cm tolerance
Men (all IPCAS Categories):
Minimum 205 cm / -1 cm tolerance
Radius
Women (all IPCAS Categories):
Minimum Downhill skis 45m
IPC Alpine Skiing/Snowboard Equipment Rule Book
3
Minimum Super-G skis 33m
Men (all IPCAS Categories):
Minimum Downhill skis 45m
Minimum Super-G skis 33m
For Downhill skis only, the radius measurement with a preparation tolerance of -1m.
Profile Width
Women and Men:
Super-G skis:
Minimum 65 mm
Downhill skis:
Minimum 67 mm
Special provision for B1 Athletes (and their guides): for DH, athletes in this
category are allowed to use a minimum of GS ski standard with no length
tolerance according to gender.
Super G
Ski length
Women (all IPCAS Categories):
Minimum 200 cm / -5 cm tolerance
Men (all IPCAS Categories):
Minimum 205 cm / -5 cm tolerance
Radius
Women (all IPCAS Categories):
Minimum 33m
Men (all IPCAS Categories):
Minimum 33m
Profile Width
Women/Men skis 200 cm or longer:
Minimum 65 mm
Women skis 195 cm to 199 cm:
Minimum 60 mm
Special provision for B1 Athletes (and their guides): for SG, athletes in this
category are allowed to use a minimum of GS ski standard with no length
tolerance according to gender.
IPC Alpine Skiing/Snowboard Equipment Rule Book
4
Giant Slalom
Ski length
Women COC/WC/WCH/PWG:
Minimum 180 cm
Women IPCAS Races:
Minimum 180 cm / -5 cm tolerance
Men COC/WC/WCH/PWG:
Minimum 185 cm
Men IPCAS Races:
Minimum 185 cm / -5 cm tolerance
Radius
Women COC/WC/WCH/PWG
Minimum 23m
Men
Minimum 27m
COC/WC/WCH/PWG
Women IPCAS Races
Minimum 21m
Men IPCAS Races
Minimum 21m
Profile Width
Men and Women: COC/WC/WCH/PWG:
Minimum 65mm
Men and Women: IPCAS Races:
Minimum 60mm
Safety Bindings
Safety bindings function as strain limiters. That is, these devices transfer specific
demands occurring during skiing to an acceptable limit, and when this limit is
overstepped, they release their firm hold on the ski.
Sit-Ski blocked bindings – All sit ski athletes who use blocked bindings are
obliged to sign the IPCAS Waiver ACCEPTANCE OF RISK AND RELEASE OF
CLAIMS, to participate in IPCAS competitions.
Anti-vibration plates
Anti-vibration plates can be mounted if the following conditions are taken into
consideration:
IPC Alpine Skiing/Snowboard Equipment Rule Book
5
Width of ski surface The width of the plates must not exceed the width of the ski surface.
Maximum height Maximum height (distance between the bottom of the running surface of the ski and
the ski boot sole) for all categories is 50 mm (Ladies, Men and Children's).
Ski stoppers
The ski stopper is a braking apparatus for skis, the function of which following the
release of the safety binding is to stop or bring to a standstill the loose ski within the
immediate vicinity of the skier's fall. The use of skis without ski stoppers during
competitions or official training runs is prohibited. The functioning of the release
mechanism must not be compromised by the method of its mounting. It is the
manufacturers' responsibility to ensure that the ski stopper functions correctly.
Ski boots
Ski boots are robust footwear developed specifically for skiing, offering protection
against jolts and bumps as well as injury from ski edges and other external
influences. The ski boot encloses the foot firmly, while at the same time allowing the
movement necessary for skiing techniques, in that the ankle has the room it needs
to flex, but at the same time facilitating the transfer of every steering movement
completely to the ski. The relevant national and international guidelines and norms
establish the requirements.
Thickness of ski boot soles Distance between the ski boot sole and the base of the heel including all hard and
soft parts:
Ladies, Men, U14 (K1) & U16 (K2)
IPC Alpine Skiing/Snowboard Equipment Rule Book
maximum 43 mm 6
Ski poles The ski pole is an item of equipment, the function of which is to aid the skier and
facilitate balance.
National and international rules establish the minimum requirements for ski pole
tips, grips, shafts, baskets, straps, length, etc. Owing to risk of injury, metal baskets
are not permitted.
Racing suits Competition suits and clothing worn underneath, such as undergarments, etc.,
must have a textile surface on the inside and the outside. The surfaces may not be
plasticised or treated by any chemical means (gaseous, liquid or solid) and must
have a minimum permeability of 30 litres per m2/sec. Seams may only exist in order
to join the portions of the suit. Outer tucks and darts are not allowed. The suits must
be equally porous in all parts, both from the outside in and from the inside out.
Minimum air permeability is established whereby the un-stretched fabric must show
a medium air permeability of a minimum of 30 litres per m2/sec under 10 mm of
water pressure. Competitors are allowed to protect all parts of the body with so
called protectors in all events:

In Downhill, protectors may not be integrated into the competition suit itself.

In all events these protectors must be worn underneath the racing suit.
(Exception forearm protection used in SG, GS and SL and shin protection
used in SL)

Protectors must fulfil the 30 litre permeability rule with the exception of the
shoulder, scapular region, chest, arms and legs. The anatomical body shape
may not be changed.
Crash helmets The use of crash helmets is compulsory for all events.
Only helmets specifically
designed for Alpine ski racing are permitted. Helmets must have a shell and
padding which cover the head and ears. Only in Slalom events soft ear helmets are
allowed. Helmets with edges that protrude are not permitted.
IPC Alpine Skiing/Snowboard Equipment Rule Book
7
Full-face helmets. All athletes who use full face helmets are obliged to sign the
IPCAS Waiver ACCEPTANCE OF RISK AND RELEASE OF CLAIMS, to participate
in IPCAS competitions.
Ski goggles Ski goggles are devices protecting the eyes against weather and rays with optically
correct lenses. Their aim is to guarantee good, contrast-free visibility in all weather
conditions. The use of ski goggles is recommended. It is prohibited to reshape the
ski goggles in order to obtain aerodynamic advantages.
Ski gloves Gloves offer protective covering against weather and external forces. The wearing of
gloves is urgently recommended. Reshaping the glove, the application of a plastic
coating on the outer surface, or the use of skai (imitation leather) with the aim of
attaining more aerodynamic features, are not allowed. The glove must not reach
beyond the elbow. Protective padding along the entire length of the glove is
permitted. The use of protective guards in the form of shields, which are pulled over
the glove, is permitted.
Back protectors
The back protector is an additional item of equipment, which protects the athlete’s
back against weather and external forces.
The back protector must adapt to the anatomical bend of the athlete’s spine and lie
flat against the body. The top edge of the back protector must be situated in the
area of the spinal column and may not go above the 7th cervical vertebrae (C7). The
maximum thickness must be in the middle part and may not exceed 45 mm; the
thickness reduces at the edges of the back protector. Designs with the view to
improve aerodynamic properties are forbidden. The back protector must be worn
underneath the competition suit.
IPC Alpine Skiing/Snowboard Equipment Rule Book
8
Adaptive Equipment
All Adaptive Equipment has to comply as specified in Rule 318 of the IPCAS Rules
and Regulation Book in order to be used on IPCAS sanctioned competition.
IPC Alpine Skiing/Snowboard Equipment Rule Book
9
Sit Ski
A sit-ski consists of a moulded seat mounted on a metal frame. A suspension
system beneath the seat eases riding on uneven terrain and helps in turning by
maximizing ski-snow contact. A metal or plastic block in the shape of a boot sole is
the base that clicks into the ski's binding.
A sit-ski can be used in Uni-Ski or Dual-Ski.
A sit-ski needs a braking device on both sides of the seat.
Outriggers
Arm crutches with ski tips attached. The system can flip out to allow the ski
attachment to rise vertically to be used as a normal crutch.
Hand/Forearm Protectors
Hand/forearm protectors are permitted.
The hand protector cannot be designed to create additional length to the hand.
No extensions perpendicular to the long axis of the forearm are permitted.
The forearm cannot exceed the skier’s anatomical length as defined in the section
under unilateral upper limb prosthesis.
Prosthesis
Prosthesis is an artificial device extension that replaces a missing body part.
Athletes with an upper limb impairment/amputation
1.
Unilateral
The overall length of the limb, including the prosthesis, cannot exceed the length of
the unaffected limb with the fist closed as if gripping a pole.
IPC Alpine Skiing/Snowboard Equipment Rule Book
10
2.
Bilateral
The overall arm measurement from the tip of the acromion to the distal end of the
prosthetic should be no longer than 0.399 x height (centimetres), with the arm in
the anatomical position.
In the event that the arm can't rest in the anatomical position, then limb segments
should be taken.
The Upper Arm measurement:
Tip of acromion to lateral epicondyle = 0.191 x height (cm)
The Forearm measurement:
Lateral epicondyle to radial styloid = 0.1485 x height (cm)
The Hand measurement:
Radial styloid to distal end of second metacarpal = 0.119/2 x height (cm)*
* If this data is to be used for snowboarding then there would be no division by 2.
The double below elbow amputee that will be wearing prosthesis, calculation can be
simplified to:
Lateral epicondyle to the end of the prosthetic should be no longer than 0.208 x
height (cm)
3.
For those classes where the use of poles is specifically excluded (no poles),
any prosthesis cannot have an extension device perpendicular to the long axis.
Athletes with a lower limb impairment /amputation
1.
Lower limb prostheses must be used with ski boots.
2.
Unilateral
IPC Alpine Skiing/Snowboard Equipment Rule Book
11
The overall length of the lower limb, including the prosthesis cannot exceed the
overall length of the unaffected limb.
3.
Bilateral
Athletes with bilateral below knee amputations
Will be limited by the following formula as to the overall length of their lower
extremities, including prostheses and ski boots for IPC competition purposes:
Overall leg length (in cm)* = or < [(thigh length-13)/0.4 + 4.3] x 1.05
*including prosthesis and ski boots
The overall length of the leg including the prosthesis and ski boot, equals or is less
than the length of the thigh minus 13, divided by 0.4, plus a 4.3cm for the
thickness of the ski boot sole with an additional 5% to the final length allowing for
natural variation.
The thigh length is measured from the anterior superior iliac spine to the inferior
pole of the kneecap or to the lower point of the medial femoral condyle if there is no
patella. This measurement is carried out with the athlete supine.
The overall length of the leg will be measured from the anterior superior iliac spine
to the heel of the ski boot placed on the prosthesis with the athlete standing.
Athletes with bilateral above knee amputation.
The length of prostheses used by athletes with bilateral lower limb amputations will
be determined using the 3-Step process described below.
Step 1:
Estimate maximum standing height from Ulna length
Measure the distance between point of the elbow (olecranon process) and the
ulna styloid.
Measure between the point of the elbow and the midpoint of the prominent bone
of the wrist. The height in metres is determined from the below table based on the
ulna length as measured in centimetres.
IPC Alpine Skiing/Snowboard Equipment Rule Book
12
Table: Ulna length and maximum standing height
Ulna
Length
(centimetres)
Male Height (metres)
Female
(metres)
21
1.54
21.5
1.55
22
1.56
22.5
1.58
23
1.59
23.5
1.61
24
1.64
1.62
24.5
1.66
1.63
25
1.67
1.65
25.5
1.69
1.66
26
1.71
1.68
26.5
1.73
1.69
27
1.75
1.70
27.5
1.76
1.72
28
1.80
1.73
28.5
1.82
1.75
29
1.84
1.76
29.5
1.85
1.77
30
1.87
1.79
30.5
1.89
31
1.91
31.5
1.93
32
1.94
Height
Step 2: Estimate maximum standing height based on measurement of Demi-span.
Demi-span is measured as the distance from the middle of the sternal notch to the
tip of the middle finger in the coronal plane.
The measure is best obtained with the athlete standing with their back against a
stable wall, right shoulder abducted to 90° with the palm of the hand facing forward.
The measure is taken in centimetres.
IPC Alpine Skiing/Snowboard Equipment Rule Book
13
The maximum standing height is then calculated from the following formula:


Females: Height in cm = (1.35 x demi-span (cm)) +60.1
Males: Height in cm = (1.40 x demi-span (cm)) +57.8
Step 3: Final estimate of maximum standing height:
Take the mean of the two estimates, maximum standing height estimated from the
ulna length and maximum standing height estimated from demi-span.
The overall standing height of the Athlete with their competitive prostheses must be
less than or equal to the mean estimated height, plus 4.3cm for the thickness of the
ski boot sole plus an additional 2.5% to the final figure allowing for natural variation.
This is demonstrated in the below formula:
Overall standing height (cm)* = or < [(result method 1 + result method 2)/ 2 + 4.3
cm] x 1.025
*including prosthesis and ski boots
The athlete’s height is measured in the standing position by using a vertical line
from the top of the skull to a line connecting the base of the heels of both ski boots.
If there is any doubt the measurement can be taken with the athlete standing on 2
sets of scales (equal weight) with the height being the vertical distance between the
top of the skull and a line joining the base of both ski boot heels. Where possible a
metal tape measure should be used for measuring.
IPC Alpine Skiing/Snowboard Equipment Rule Book
14
The IPC Snowboard Cross Equipment Rules
Helmets
The use of crash helmets is compulsory for all snowboard events. Helmets used in
IPC Snowboard events shall be specifically designed and manufactured for the
respective discipline and shall bear a CE mark and con- form to recognized and
appropriate standards such as CEE 1077 or US 2040, ASTM 2040.
Snowboards
Only Snowboards can be used in competitions. The board’s minimal width is
restricted as follows:
Gliding’s surface length/width
up to 135 cm/14 cm
more than 135 cm/16 cm
Bindings
The bindings must be fixed diagonally on the long axis of the board. The boots
cannot overlap each other.
Plate Systems that connect both bindings are not allowed in SBX (individual plate
systems are allowed on each binding)
Retention devices, leashes
Safety leashes are optional unless required by the organiser or the ski area.
IPC Alpine Skiing/Snowboard Equipment Rule Book
15
Balance and Speed control
The competitors are not allowed to wear anything on the hands besides gloves or to
use any kind of devices to additionally support their balance, reduce or accelerate
their speed, like poles or sticks etc.
Competition Clothing
SBX competition suits must be two pieces – pants and separate top. Forms fitting
speed or downhill suites are not permitted. No straps, fastening devices or other
methods can be used to tighten the suit material closer to the body.
Back protectors
Protective equipment i.e. back protection must be worn on the body. Back
protector must not offer an aerodynamic advantage. None protruding body
protection and padding is recommended.
IPC Alpine Skiing/Snowboard Equipment Rule Book
16