HOW TO USE THIS MANUAL
Transcription
HOW TO USE THIS MANUAL
HOW TO USE THIS MANUAL How to Use This Manuals HOW TO USE THIS MANUALS 1. How to Use This Manuals A: HOW TO USE THIS MANUALS 1. STRUCTURE Each section consists of SCT that are broken down into SC that are divided into sections for each component. The specification, maintenance and other information for the components are included, and the diagnostic information has also been added where necessary. 2. CONTENTS The first page has an index with tabs. HU-2 How to Use This Manuals HOW TO USE THIS MANUALS 3. COMPONENT Illustrations are provided for each component. The information necessary for repair work (tightening torque, grease up points, etc.) is described on these illustrations. Information is described using symbol. To order parts, refer to parts catalogue. Example: (7) (5) (21) T2 (5) T6 (8) (20) (1) T1 T3 (4) (2) T8 T2 (3) (6) T3 T10 (1) T5 T3 T2 T3 (2) T4 (4) (4) (3) (12) (22) (23) (16) (14) (9) (6) (10) (11) (11) (18) T1 (13) (10) (9) T3 (15) T2 (17) (19) T6 (4) (3) (7) T4 (10) (4) (15) T2 T11 T5 (22) T6 (3) (12) (35) T4 (8) (10) T3 (26) (23) (14) T2 T5 (27) T2 (34) (24) (25) T7 (24) (36) (25) (13) (31) (30) T2 T5 (29) (10) (17) (16) (37) (32) (28) (18) T3 (33) T4 T1 : Selective part : Replacement part T1 (21) : Sealing point : Should be lubricated with oil. (20) T9 : Should be lubricated with grease. (19) T1 , T2 .... : Tightening torque HU-00017 HU-3 How to Use This Manuals HOW TO USE THIS MANUALS 4. SPECIFICATION If necessary, specifications are also included. 5. INSPECTION Inspections to be carried out before and after maintenance are included. 6. MAINTENANCE • Maintenance instructions for serviceable parts describe work area and detailed step with illustration. It also describes the use of special tool, tightening torque, caution for each procedure. • If many serviceable parts are included in one service procedure, appropriate reference is provided for each parts. Example: 15.Main Shaft Assembly for Single-Range A: REMOVAL (A) (B) 1) Remove the manual transmission assembly from vehicie. <Ref. to MT-33, REMOVAL, Manual Transmission Assembly.> (C) 11) Tighten the lock nuts to the specified torque using ST1 and ST2. NOTE: Secure the lock nuts in two places after tightening. ST1 498937000 TRANSMISSION HOLDER ST2 499987003 SOCKET WRENCH (35) (E) (D) (F) Tightening torque: 118 N m (12.0 kgf-m, 86.8 ft-lb) (G) (H) ST2 ST1 HU-00020 (A) (B) (C) Component Process Reference (D) (E) (F) Cautions Tool number of special tool Name of special tool HU-4 (G) (H) Tightening torque Illustration How to Use This Manuals HOW TO USE THIS MANUALS 7. DIAGNOSIS Tables showing a step-by-step process make it easy to conduct diagnosis. 8. SI UNITS Measurements in these manuals are according to the SI units. Metric and yard/pound measurements are also included. Example: Tightening torque: 44 N·m (4.5 kgf-m, 33 ft-lb) 9. EXPLANATION OF TERMINOLOGY • List 2ndr AAI A/B : Secondary : Air Assist Injection : Airbag ISC LED LH : Idle Speed Control : Light Emitting Diode : LH (Left Hand) ABS A/C ACC : Anti-lock Brake System : Air Conditioner : Accessory LSD M/B MD : Limited Slip Differential : Main Fuse & Relay Box : Mini Disc A/F ALT ASSY AVCS : Air Fuel Ratio : Generator : Assembly : Active Valve Control System MFI MP-T MT NA : : : : Multi Point Injection Multi-Plate Transfer Manual Transmission Natural Aspiration AWD BATT CAN CD-R/RW : : : : NC NO OP OBD : : : : Normal Close (Relay) Normal Open (Relay) Option Parts On-Board Diagnosis COMPL CPU DCCD DOHC DTC : : : : : Complete Central Processing Unit Driver’s Control Center Defferential Double Overhead Camshaft Diagnosis Trouble Code P/S P/W PCD PCV PID : : : : DOJ DVD EBD : Double Offset Joint : Digital Versatile Disc or Digital Video Disc : Electric Brake Distribution Pr RAM RH : Primary : Random Access Memory : RH (Right Hand) ECM EGI E/G EGR ELR EX : : : : : : ROM rpm SOHC SRS SSM ST : : : : : : ETC F/B : Electronic Throttle Control : Fuse & Joint Box STD SW : Standard : Switch FL FWD GPS HID H/U IG IN : : : : : : : TCM TGV T/M UV VDC V.I.N. VSV : : : : : : : INT I/O : Intermittent : Input / Output VTD W/H : Variable Torque Distribution : Wiring Harness All Wheel Drive Battery Controller Area Network CD Recordable/Rewritable Engine Control Module Electronic Gasoline Injection Engine Exhaust Gas Recirculation Emergency Locking Retractor Exhaust Fusible Link Front Wheel Drive Global Positioning System High-Intensity Discharge Hydraulic Unit Ignition Intake HU-5 : Power Steering Power Window Pitch Circle Diameter Positive Crankcase Ventilation Parameter Identification Read Only Memory Revolution Per Minute Single Overhead Camshaft Supplemental Restraint System Subaru Select Monitor Special Tool Transmission control module Tumble Generator Valve Transmission Ultraviolet Vehicle Dynamics Control Vehicle Identification Number Vacuum Switching Valve How to Use This Manuals HOW TO USE THIS MANUALS HU-6