Document 6495151

Transcription

Document 6495151
HOW TO PERFORM AN ARC FLASH STUDY
LOCATIONS AND DATES - 2006
LOCATION
DAY 1
DAY 2
ORLANDO, FL (2005)
December 8
December 9
INDIANAPOLIS, IN
March 2
March 3
NEW YORK, NY
March 23
March 24
BOSTON, MA
April 4
April 5
CHICAGO, IL
May 24
May 25
CHARLOTTE, NC
July 27
July 28
LA JOLLA, CA
September 26
September 27
RICHLAND, WA
November 14
November 15
CLASS REGISTRATION FORM
Or register on line at www.brainfiller.com
NAME______________________________________
HOW TO PERFORM AN
ARC FLASH STUDY - I
COURSE No. AFH1 - Day 1 - $ 350
COMPANY__________________________________
ADDRESS___________________________________
CITY_______________________________________
STATE_________________
ZIP________________
HOW TO PERFORM AN
ARC FLASH STUDY - II
COURSE No. AFH2 - Day 2 - $ 350
TELEPHONE_______________FAX______________
POWER SYSTEM ENGINEERING - 5 DAY CLASS
LOCATIONS AND DATES - 2006
LOCATION
DATES
HOUSTON, TX
January 23 - 27
CANTON, OH
March 13 - 17
CANTON, OH
June 5 - 9
SCOTTSDALE, AZ
October 23 - 27
SCHEDULE UPDATES
Check our website regularly to see
new class and schedule additions. If
you have any questions, comments or
suggestions, call us at 800-874-8883
E-MAIL_____________________________________
(required for confirmation letter)
LOCATION AND DATE(S)______________________
CLASS NAME _______________________________
REGISTRATION FEE:
Day 1 Only: $350.00 ____
Both Days: $695.00 ____
REGISTERING 3 TOGETHER, SENDING 4TH FREE! _________
Register 3 people and send the 4th person free.
Use photo copies of this form for multiple registrations.
BRAINFILLER $20 DISCOUNT CODE _______________________
The $20 per person discount code is obtained by joining the
brainfiller e-news list at Brainfiller.com. For multiple registrations,
each person must have a code to receive a discount.
JOIN BRAINFILLER
Join Brainfiller today by signing up at
brainfiller.com and you will receive the
following discounts and information:
•
•
•
•
•
•
$20 Discount on Seminar Registration*
$10 Discount on Training Video Order*
Free Technical Articles
Free Calculation Worksheets
New Training Videos Announcements
Announcements of New Courses and Articles
Day 2 Only: $350.00
____
One Week Class: $995.00 ____
____
____
____
____
____
____
____
METHOD OF PAYMENT
Bill The Company
Purchase Order Number___________________________
Federal Government Form 1556
Check
Make Check Payable To:
Mastercard
Technical Training Group
Visa
P.O. Box 35999
Discover
Canton, OH 44735-5999
Cardholder’s Name ______________________________________
Credit Card Number ______________________________________
Expiration Date
________________
* Discount is limited to a one time use and is not transferable.
TRAINING VIDEOS
DVDs of Jim Phillips’ training
programs are available at
Brainfiller.com. Join Brainfiller and
receive a $10 discount
4 Easy Ways to Register!
MAIL:
ON LINE:
PHONE:
FAX:
T2G TECHNICAL TRAINING GROUP®
P.O. Box 35999
Canton, OH 44735-5999
www.brainfiller.com
1.800.874.8883
1.330.830.1159
Instructor:
Jim Phillips, P.E.
MORE THAN JUST ANOTHER NFPA 70E CLASS!
As a member of the IEEE 1584 Arc Flash Working
Group, Jim takes you through the steps required to
perform a detailed arc flash study based on both IEEE
1584 and NFPA 70E. Learn how to calculate incident
energy, arcing current and flash protection boundaries.
Spreadsheets are provided in class for the calculations.
THESE DYNAMIC CLASSES INCLUDE:
• How to Perform a Detailed Arc Flash Study
• Calculations Based on IEEE Standard 1584™
• Impact of Overcurrent Device Settings on Arc Flash
• Calculations of Flash Protection Boundaries
• Calculation of Incident Energy in calories/cm2
• Determination of PPE Based on Incident Energy
• NFPA 70E Requirements and Calculations
• In Class Computer Modeling Demonstration
Also, we are offering one of our more popular classes:
POWER SYSTEM ENGINEERING
Intensive One Week Course
4.5 Days • $995 • See Inside Brochure for Details
Power System Design • Short Circuit Analysis
Coordination Studies • Harmonic Studies
Register 3 people together and send a 4th person free!
REGISTER TODAY! 1.800.874.8883
www.brainfiller.com
t2g technical training group
IACET APPROVED CONTINUING EDUCATION PROVIDER
Copyright © 2005 Technical Training Group - All Rights Reserved
®
HOW TO PERFORM AN ARC FLASH STUDY
COURSE OUTLINE - DAY 2 - $350
HOW TO PERFORM AN ARC FLASH STUDY
COURSE OUTLINE - DAY 1 - $350
•
•
•
•
•
•
•
•
•
•
•
INTRODUCTION
HUMAN EFFECTS
Physiological Effects, Tissue Damage, Internal Organ
Damage, Burns Fibrillation, “Curable” 2nd Degree Burn
Requirements, Arc Blast Pressure, Sound Pressure,
CODES AND STANDARDS
OSHA 29 CFR - Part 1910, Subpart S, NFPA 70, National
Electrical Code®, NFPA 70E, Standard for Electrical Safety
in the Workplace, IEEE Standard 1584™, Guide for Arc
Flash Hazard Analysis
CATEGORIES OF ELECTRICAL HAZARDS
Electric Shock, Arc Flash, Arc Blast
ELECTRICAL CIRCUIT DYNAMICS
Arcing Faults vs. Bolted Faults, Effect of Current on
Overcurrent Device Clearing Time, ¼ to ½ cycle vs.
Multiple Cycle Interruptions
NFPA 70E REQUIREMENTS
Safety Related Work Practices, Installation Safety
Requirements, Application of NFPA 70E Table 130.2(C)
APPROACH BOUNDARIES
Limited Approach, Restricted Approach, Prohibited
Approach, Flash Protection Boundary
HAZARD/RISK CATEGORY
Defining the Hazard / Risk Category by cal/cm2 Class 0, 1,
2, 3, 4 Requirements
PERSONAL PROTECTIVE EQUIPMENT PPE
Protective Clothing Characteristics, Flash Suits, Face
Protection, Hand Protection, Foot Protection, ASTM
CASE PROBLEM – Arc Flash Hazard Assessment
ROUND TABLE DISCUSSION (Optional)
JIM PHILLIPS, P.E.
For almost 25 years, Jim has conducted over 1500 live seminars
for tens of thousands of people from the United States and
around the globe. A highly sought after speaker in the subjects
of electric power system design and analysis, he is a member of
the IEEE 1584 working group “IEEE Guide for Performing Arc
Flash Hazard Calculations” and is a regular contributor for NEC
Digest® the NFPA’s Official NEC® Magazine. He is nationally
known for his power system analysis background and ability to
analyze complex problems. Jim consistently receives excellent
reviews for his “unique” teaching style and ability to answer the
tough questions in an easy to understand manner. Early in his
career he worked for Ohio Edison Company and was a Project
Engineer for Square D Company's Power System Analysis
Group. He is also the founder of Phillips Engineers +
Consultants, Inc. He has taught classes at the college level and
is a Senior Member of IEEE where he has been a distinguished
lecturer, past member of the Energy Policy Committee,
Illumination Engineering Society, NFPA, and many other
organizations. He has also written for Consulting-Specifying
Engineer Magazine and holds a BSEE from The Ohio State
University. He is a licensed Professional Engineer in many
states. You can see video clips of Jim at www.brainfiller.com
•
•
•
•
•
•
•
•
•
PERFORMING THE DETAILED ARC FLASH STUDY
Calculate Boundaries and Incident Energy, Warning
Labels, Personnel Protective Equipment Requirements
SYSTEM MODELING FOR ARC FLASH STUDY
Transformer, Conductor and Source Impedance, High vs.
Low Short Circuit Current, Defining Buses to be Modeled
MODES OF OPERATION
Utility Configuration, Generators and Emergency
Conditions, Low Short Circuit Conditions with Long Device
Tripping Times, Large Motors, System Grounding
WORKING DISTANCE AND BOUNDARIES
Defining Working Distance, Calculations of Arc Flash
Boundary @ 1.2 cal/cm2, Detailed Problems to Solve
CALCULATION OF INCIDENT ENERGY EXPOSURE
FOR FLASH HAZARD ANALYSIS
Arcs in Open Air vs. in Cubic Box, Maximum Bolted Fault,
Minimum Self Sustaining Arc, Effect of Minimal Fault and
High Incident Energy Exposure, Arc Gap, Examples of
Performing Studies with Available Computer Programs
IEEE Std. 1584™ - ARC FLASH CALCULATIONS
NFPA 70E Tables vs. IEEE Std. 1584™ Calculations,
Flash Boundary based on 300 kA cycles vs. Detailed
Calculations Based on Actual Fault Current and Device
Clearing Times, Problem Solving Using Spreadsheets
ARC FLASH WARNING LABELS
Flash Hazard Boundary, Class of PPE, Shock Hazard
Boundary, Approach Boundaries, Code Requirements
REDUCING INCIDENT ENERGY LEVELS
Design and Operating Changes, Current Limiting Devices,
Lower Device Settings, Instantaneous Functions
CASE PROBLEM – Performing the Arc Flash Study
REGISTRATION FEE
The registration fee is payable by check, credit card,
government form 1556 or company purchase order. The fee
includes course material, breaks, course notebook, completion
certificate, and transcript of CEU credit. Lunch is on your own.
DAILY SCHEDULE
Registration:
7:30 - 8:00
Program:
8:00 - 4:00
Lunch:
Discussion:
12:00 - 1:00
4:00 - 4:30
CONTINUING EDUCATION - 1.5 CEUs FOR BOTH DAYS
You will be awarded 1.5 CEUs for the Arc Flash Class and 3.2
CEUs for the Power System Class. T2G is an IACET approved
CEU provider which is recognized by many state boards.
CANCELLATION POLICY
Cancellations received at least eight business days prior to any
seminar will receive a full refund. Cancellations made after
that, will be subject to a $75 cancellation fee or credit toward
another course. Seminar fees are not refundable after class
has begun. Technical Training Group, Inc. reserves the right to
cancel or reschedule a course if necessary, with liability limited
to refund of the registration fee.
POWER SYSTEM ENGINEERING
COURSE OUTLINE - 4.5 DAYS - $995
•
•
•
•
•
•
ELECTRICAL DESIGN 1 - BASIC CONCEPTS
Voltage Drop, Voltage Selection, Load Calculations,
Conductor and Conduit Selection, Overcurrent Protection,
Switchboards and Panelboards, Lighting Design
ELECTRICAL DESIGN 2 - EQUIPMENT SELECTION
Transformer Selection and Protection, Motor Circuit
Design, Grounding Electrode System, Equipment
Grounding, Bonding, Power Quality Issues, Hazardous
Location Design, Lightning Protection, Generator
Selection, Transfer Switches, UPS Systems
SHORT CIRCUIT ANALYSIS
Short Circuit Study Basics, Conductor and Transformer
Short Circuit Calculations, Percent Impedance, Motor
Contribution, Interrupting Ratings, Series Ratings, X/R
Ratio, Asymmetrical Faults, Short Circuit Testing
PROTECTIVE DEVICE COORDINATION STUDIES
Selective Coordination Basics, Time Current Curves,
Adjustable Instantaneous Settings, Fuse Curves, L,S,I,G
Settings, Nuisance Tripping, Ground Fault Protection,
Overcurrent Relays, ANSI C57 Transformer Protection
Requirements, Delta-Wye ANSI Adjustments,
POWER FACTOR
kW, kvar, KVA, PF, Leading vs. Lagging, Utility Rate
Structures, Economic Analysis, Sizing Capacitors
HARMONIC ANALYSIS
Harmonic Basics, Frequency Spectrum, Motor Drives and
Other Non-Linear Loads, Parallel and Series Resonance
Calculations, Voltage and Current Distortion Calculations,
IEEE 519 Limits, Third Harmonics and Over Sized
Neutrals, K Factor Transformers, Harmonic Filter Design
Calculations, Detuning, Performing a Harmonic Study
IN HOUSE / ON SITE TRAINING PROGRAMS
More companies are choosing to hold these programs at their
location and save on travel costs. For an all inclusive fee, Jim
Phillips, P.E. will bring the course to your location and train your
people. This is a great way to get everyone together and discuss ideas and topics that are unique to your site. Holding a
program at your location can save up to 50% over the cost of
sending everyone to the publicly scheduled programs. Are you
currently making training plans?
• Call or e-mail us today for an in house training proposal.
• Contact us soon, Jim’s schedule usually fills up quickly!
Short Circuit Analysis
Protective Device Coordination
Protective Relaying
Electric Power Calculations
National Electrical Code
Design of Power Systems
Arc Flash Hazard Analysis
Grounding and Power Quality
Harmonic Analysis
Emergency Power Systems
Power Equipment
Motor Design and Application
800.874.8883 or www.brainfiller.com