How to build a Bitcoin Mining Rig Cluster By Eric Zhivalyuk

Transcription

By Eric Zhivalyuk
How to build a Bitcoin Mining Rig Cluster
Before you read this post… you should know I am now mining litecoins…. this guide is outdated regarding bitcoin pricing, profitability, hardware advancements etc.. but it stills
holds a great deal of useful information that is required for bitcoin mining.
In this post, I am going to share my project in creating a Bitcoin mining cluster, which I started in June 2011. I will try to include everything from beginning to the end with as
much detail as possible. Most of this project was trial and error, so I will do my best to note each step of the way with all the pros and cons. I would beleive this to the most
complete guide currently available for helping people understand the basics of Bitcoin mining, and actually being able to delve into it as well. Please keep in mind that my
Bitcoin operation is completely handled under Linux operating systems, however I do have a few Windows based Bitcoin miners so I will provide notes, guides, and best
practices for that OS as well. Also note that many of the references that I make in this post are in regard to my person Bitcoin mining rigs.
If you do not know what Bitcoin is, I highly suggest you read up on the following sites:
•
http://www.weusecoins.com/
•
https://en.bitcoin.it/wiki/FAQ
•
http://gizmodo.com/5803124/what-is-bitcoin
•
http://en.wikipedia.org/wiki/Bitcoin
Here are pictures of a few of my rigs:
http://www.flickr.com//photos/ewoah/sets/72157627128035351/show/
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 1
Visit http://www.bitcoinrumors.com for latest Bitcoin news and rumors
By Eric Zhivalyuk
10 steps to implement and deploy your Bitcoin Mining Rigs
Below are the 10 steps to getting your bitcoin mining rigs running. Hopefully, I will be able to answer all your questions later in this post.
•
1. Setup bitcoin mining pool accounts
Assuming you are not solo mining, you will need to create account with 1 or more bitcoin mining pools. Discussed in section 12.
•
2. Find a location for your bitcoin miners
You will need to find a good place that you can keep your bitcoin mining rigs. Somewhere they will not be bothered. No kids, pets, weather, or other interferences.
•
3. Ensure location quality / resources (Internet, power, cooling)
You will need to ensure that wherever you keep you bitcoin mining rigs you have: An internet connection, enough power, and a suitable operating temperature with enough
airflow. Discussed in section 6, 7, and 8.
•
4. Asses your budget
Determine how much money you have, and want to invest in bitcoin miners. Weigh the profit, loss, and risks. Discussed in section 2, and 3.
•
5. Decide on hardware and purchase hardware
You will need to select and purchase the best hardware according to your budget. All this is explained in section 4.
•
6. Build, configure, and test bitcoin rigs
You will need to be capable of building these machines from scratch. Without the knowledge of building computers, it is going to be difficult to be successful in running your
own bitcoin mining rig. You must know the ins and outs of these beasts. Also discussed in section 4.
•
7. Obtain and implement software and scripts
There are many options to choose from. Will you be using Windows, or Linux? What kind of Bitcoin mining software will you choose? Will you decide to automate your
bitcoin mining rigs? The questions will never end. Learn more in section 11.
•
8. Setup bitcoin proxy
Now that you have everything setup, you could centralize everything using a bitcoin proxy. This will always keep your login information the same, and allow you to manage
mining pools and workers very easily. Discussed in section 13.
•
9. Deploy
Finally, deploy your bitcoin miners, and start generating bitcoins!
•
10. Overclock
When everything is running smoothly, get even more performance out of your GPUs by overclocking them. Discussed in section 9.
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 2
By Eric Zhivalyuk
Here are the primary things we will cover in this post:
I apologize for the order of these items, as you may need to jump around through sections to reference terms, and explanations. I did not think I would be elaborating this
much.
WHAT IS BITCOIN MINING?
•
•
•
•
•
•
1.1
1.2
1.3
1.4
1.5
1.6
WHAT IS BITCOIN MINING?
WHY WOULD I WANT TO MINE FOR BITCOINS?
WHAT IS A BITCOIN MINING RIG?
WHAT IS GPU MINING?
WHAT IS CPU MINING?
WHY A GPU MINES FASTER THAN A CPU?
INVESTMENT
•
•
•
2.1 HOW MUCH MONEY DO I HAVE TO INVEST?
2.2 HOW MUCH MONEY DO I WANT TO INVEST?
2.3 HOW MUCH MONEY DID YOU PERSONALLY INVEST?
RETURN ON INVESTMENT (ROI)
•
•
•
•
3.1
3.2
3.3
3.4
WHAT IS THE CURRENT VALUE OF BITCOIN?
HOW MANY BITCOINS CAN I GENERATE PER DAY?
WHAT IS BITCOIN DIFFICULTY LEVEL?
HOW WILL THE DIFFICULTY LEVEL AFFECT MY BITCOIN MINING?
HARDWARE
•
•
•
•
4.1
4.2
4.3
4.4
WHAT KIND OF HARDWARE DO I NEED?
WHAT IS THE BEST HARDWARE TO GET FOR MY BUCK?
AM I CAPABLE OF BUILDING THESE MACHINES FROM SCRATCH?
WHAT EXACT HARDWARE DID YOU USE FOR YOUR BITCOIN MINERS?
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 3
By Eric Zhivalyuk
GPU MINING
•
•
•
•
•
5.1
5.2
5.3
5.4
5.5
WHERE CAN I COMPARE GRAPHICS CARDS (GPUS)?
20 POPULAR MINING GPUS
WHAT IS MHASH RATE?
WHAT ARE STREAM PROCESSORS?
WHY ARE ATI GPUS BETTER THAN NVIDIA GPUS FOR BITCOIN MINING?
NETWORKING
•
•
•
6.1 WHAT KIND OF INTERNET CONNECTION TO I NEED?
6.2 DO I NEED TO CONFIGURE MY FIREWALL TO RUN BITCOIN?
6.3 HOW DOES THE PEER FINDING MECHANISM WORK?
COOLING
•
•
•
•
•
•
7.1
7.2
7.3
7.4
7.5
7.6
HOW
HOW
HOW
HOW
HOW
HOW
AM I
AM I
DO I
HOT
CAN
DO I
GOING TO KEEP THESE RIGS COOL?
GOING TO KEEP THE ROOM COOL?
MEASURE ROOM TEMPERATURE?
WILL MY GPUS GET AND CAN THEY OVERHEAT?
I CHANGE THE FAN SPEED ON MY GPUS?
MEASURE GPU TEMPERATURES?
POWER
•
•
•
8.1 HOW MUCH POWER WILL I NEED?
8.2 HOW MUCH WILL MY POWER BILL GO UP?
8.3 HOW DO I MEASURE MY POWER USAGE?
OVERCLOCKING
•
•
•
9.1 WHAT IS OVERCLOCKING?
9.2 SHOULD I USE OVERCLOCKING?
9.3 HOW DO I OVERCLOCK MY GPUS?
---------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------
Page 4
By Eric Zhivalyuk
MANAGING
•
•
•
10.1 USING A NODE PC TO OVERSEE YOUR BITCOIN MINERS
10.2 HOW DO I MANAGE MY BITCOIN RIGS?
10.3 CAN I MANAGE THEM REMOTELY?
SOFTWARE
•
•
•
•
•
11.1
11.2
11.3
11.4
11.5
WHAT SOFTWARE CAN I USE TO RUN TO MINE FOR BITCOINS?
WHAT IS ATI CATALYST CONTROL CENTER, AND WHY DO I NEED IT?
WHAT OPERATING SYSTEMS CAN I MINE FOR BITCOINS?
CAN I RUN A BITCOIN MINER FROM A USB FLASH DRIVE?
AUTOMATION AND BATCH SCRIPTS
BITCOIN MINING POOLS
•
•
•
•
12.1
12.2
12.3
12.4
WHAT ARE BITCOIN MINING POOLS (POOL MINING)?
WHAT ARE THE BENEFITS OF USING A BITCOIN MINING POOL?
DIFFERENT TYPES AND REWARDS OF MINING POOLS
COMPARISON OF MINING POOLS?
BITCOIN PROXY
•
•
13.1 WHAT IS A BITCOIN MINING PROXY?
13.2 WHAT ARE THE BENEFITS OF USING A BITCOIN MINING PROXY?
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 5
By Eric Zhivalyuk
Some of these answers were derived from https://en.bitcoin.it/wiki/ under the Creative Commons Attribution 3.0 license.
Explaining Bitcoin mining…
1.1 WHAT
IS BITCOIN MINING?
Simple definition: Bitcoin mining is the process of creating or generating new Bitcoins.
Technical definition: Mining is the process of spending computation power to find valid blocks and thus create new Bitcoins. Technically speaking, mining is the calculation of
a hash of the a block header, which includes among other things a reference to the previous block, a hash of a set of transactions and a nonce. If the hash value is found to be
less than the current target (which is inversely proportional to the difficulty), a new block is formed and the miner gets 50 newly generated Bitcoins. If the hash is not less than
the current target, a new nonce is tried, and a new hash is calculated. This is done millions of times per second by each miner.
Common question: Is mining used for some useful computation? The computations done when mining are internal to Bitcoin and not related to any other distributed
computing projects. They serve the purpose of securing the Bitcoin network, which is useful.
1.2 WHY
WOULD I WANT TO MINE FOR BITCOINS?
Good question! Here are some of my reasons:
For fun
Building Bitcoin mining rigs is fun, well, if you a geek. I have thoroughly enjoyed the entire process of building, configuring, testing, and occasionally fist fighting with these
machines. Okay, but now the real reason…
Money
If anyone tells you otherwise, the real reason why everyone wants to mine for bitcoins is because you can make money! Yes, that’s right… How you ask? Well, it’s very simple,
currently there are millions of US Dollars, British Pounds, and Euros being traded for bitcoins everyday through online marketplaces! In these systems, users place buys and
sells themselves on the exchange and the price is set by the market. The exchange usually acts as a mutual platform between the 2 parties holding people’s funds and
performing the trade. The exchange may take a small percent or charge a fee on withdrawals/deposits as their cost.
Not only that, there are plenty of online stores that accept bitcoin as currency. You can buy things like electronics, books, music, games, clothing, and more!
Without going into too much detail, you can get all the nitty gritty right here:https://en.bitcoin.it/wiki/Trade
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 6
By Eric Zhivalyuk
1.3 WHAT
IS A BITCOIN MINING RIG?
A mining rig is a computer system used for mining Bitcoins. The rig might be a dedicated miner where it was procured, built and operated specifically for mining or it could
otherwise be a computer that fills other needs, such as performing as a gaming system, and is used to mine only on a part-time basis.
You should read this wiki page for more detailed information, and example Bitcoin mining rig configurations: https://en.bitcoin.it/wiki/Mining_rig
1.4 WHAT
IS GPU MINING?
GPU mining is the process of using a graphics card (also known as a video card or graphics card) for Bitcoin computations. GPU mining has become the primary form of
generating new bitcoins, as appose to using a CPU.
The GPU, or graphics processing unit, is a part of the video rendering system of a computer. The typical function of a GPU is to assist with the rendering of 3D graphics and
visual effects so that the CPU doesn’t have to.
1.5 WHAT
IS CPU MINING?
CPU mining is the process of using a a CPU for Bitcoin computations. CPU mining has become less common since GPU mining has been found to be up to 800+ times faster.
The CPU, or central processing unit is usually a removable component that plugs into the computer’s main circuit board, or motherboard and sits underneath a large, metallic
heat sink which usually has a fan, a few are cooled by water.
A CPU is designed primarily to be an executive and make decisions, as directed by the software. For example, if you type a document and save it, it is the CPU’s job to turn
your document into the appropriate file type and direct the hard disk to write it as a file. CPU’s can also do all kinds of math, as inside every CPU is one or more
“Arithmetic/Logic Units” (ALU’s). CPU’s are also highly capable of following instructions of the “if this, do that, otherwise do something else”. A large bulk of the structures inside
a CPU are concerned with making sure that the CPU is ready to deal with having to switch to a different task on a moment’s notice when needed.
CPU’s also have to deal with quite a few other things which add complexity, including:
•
enforcing privilege levels and the boundaries between user programs and the operating system
•
creating the illusion of “virtual memory” to programs
•
for the most popular processors, being backwards compatible with legacy code
1.6 WHY
A GPU MINES FASTER THAN A CPU
Some Bitcoin users might wonder why there is a huge disparity between the mining output of a CPU versus a GPU.
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 7
By Eric Zhivalyuk
A GPU is like a CPU, but there are important internal differences that make them suited toward their special tasks. These are the differences that make Bitcoin mining far more
favorable on a GPU.
A CPU core can execute 4 32-bit instructions per clock (using a 128-bit SSE instruction) or 8 via AVX (256-Bit), whereas a GPU like the Radeon HD 5970 can execute 3200
32-bit instructions per clock (using its 3200 ALUs or shaders). This is a difference of 800 (or 400 in case of AVX) times more instructions per clock. As of 2011, the fastest
CPUs have up to 6, 8, or 12 cores and a somewhat higher frequency clock (2000-3000 MHz vs. 725 MHz for the Radeon HD 5970), but one HD5970 is still more than five
times faster than four 12-core CPUs at 2.3GHz (which would also set you back about $4700 rather than $350 for the HD5970).
A GPU is very different. Yes, a GPU can do math, and can also do “this” and “that” based on specific conditions. However, GPUs have been designed so they are very good at
doing video processing, and less executive work.
Video processing is a lot of repetitive work, since it is constantly being told to do the same thing to large groups of pixels on the screen. In order to make this run efficiency,
video processors are far heavier on the ability to do repetitive work, than the ability to rapidly switch tasks.
GPUs have large numbers of ALU’s, more so than CPU’s. As a result, they can do large amounts of bulky mathematical labor in a greater quantity than CPU’s.
For more info on this topic go here: https://en.bitcoin.it/wiki/Why_a_GPU_mines_faster_than_a_CPU
Investment
2.1 HOW
MUCH MONEY DO I HAVE TO INVEST?
Ahh, this is a good question I am often asked, and it can be interpreted 2 different ways:
a. How much money do I actually have available to invest in Bitcoin mining?
Well, it’s pretty obvious that only you know the answer to that question. If you can’t answer this question, I suggest you login to your online banking and start keeping better
track of your finances
b. How much money is required in order for me to start mining for Bitcoins?
This was the question you were probably referring to. And unfortunately, there is no single answer to this question. Assuming you have a computer, you can already begin
mining for Bitcoins! Yes that is correct! Using your current computers CPU, or GPU you can actually begin generating Bitcoins using various available free software (depending
on your operating system). The bad news is that unless you have done the research or actually customized your computer for this type of performance, chances are that you
really won’t be able to generate Bitcoins at a feasible rate to make any money (in your lifetime at least).
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 8
By Eric Zhivalyuk
If you have some money readily available for investment, and based on my current experience you can build a GPU mining machine for as low as about $288. However, that
would be with very low-level mining machine with only 1 GPU capable of generating at small mhash rate. I’ll explain what mhash means in section 5.3.
2.2 HOW
MUCH MONEY DO I WANT TO INVEST?
This is a tricky question, and all depends on how big of a risk taker you are. I like to put my money to work so I’m a big fan of investing. Anywhere that I can put money, and
turn it into more money is usually all I need to hear. But, the most important thing is analyzing your risk and loss.
Let’s be honest, Bitcoin as a currency is the first of its kind, so we really can’t be sure how stable it is, or how long it’s going to be around. Maybe one day the price will crash,
as we’ve seen the price has fluctuated pretty violently at times. Maybe governments will get involved, shutting it down, making it illegal, etc.. Maybe people will one day just
begin to de-value Bitcoin, and no longer accept it as currency. There are various downfalls that can come about, but here is the way I look at my investment losses; If the worst
possible thing happens, which is Bitcoin ceasing to exist PERIOD, what am I left with? Essentially, I am left with a lot of valuable hardware, which is in perfectly good condition.
Many people would probably pay some good money for these computers on Ebay or other marketplaces. These machines are a gamers dream with their video rendering
capabilities. Not to mention that they each can support up to 18 monitors! They would be great for stock brokers and day traders. Bottom line is, I can probably sell this
equipment and make back 70%-75% of my initial investment. Therefor I have my conclusion; I am willing to take a risk in a chance of losing 30% of my investment, and to me it
is worth the risk. Some of you won’t be okay with that, by that is why it’s called an INVESTMENT: “A thing that is worth buying because it may be profitable or useful in the
future.”
2.3 HOW
MUCH MONEY DID YOU PERSONALLY INVEST?
If you want to know how much I spent on each machine, I’ll say it flat out:
About $1,600 per machine including shipping. Each machine is currently capable of calculating 1,071 mhash/s. Yes my GPUs are overclocked and we’ll discuss that later in
section 9.1.
I also post my exact hardware configuration, and the links to where I purchased it in section 4.4.
Return on Investment (ROI)
3.1 WHAT
IS THE CURRENT VALUE OF BITCOIN?
The current monetary value of Bitcoin can be determined by going to http://Bitcoincharts.com/markets/
At the time of my writing this article, the current value is about $14 USD per Bitcoin. Of course this price is subject to change and will fluctuate. I’ve seen Bitcoin as high as $28
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 9
By Eric Zhivalyuk
USD, and have seen many people sell at that price too. The price of Bitcoin will unquestionably be one of the two primary factors of your ROI. When started building my rigs,
the price of Bitcoin was $20 – $24. At that time, I calculated my ROI to take about 2 months. Obviously, that has changed, and I will explain more in section 3.4 below.
3.2 HOW
MANY BITCOINS CAN I GENERATE PER DAY?
This depends on 3 main factors:
a. Are you using a Bitcoin Pool or Solo Mining? (More info in section 12.1)
b. What is the current difficulty rate? (More info in section 3.3)
c. What kind of hardware are you using? (More info in section 4.1)
Using this calculator, you can get a pretty good estimate of how many Bitcoins you can generate, and how much money you could make if you sell those Bitcoins for USD.
3.3 WHAT
IS BITCOIN DIFFICULTY LEVEL
Difficulty is a measure of how difficult it is to find a new block compared to the easiest it can ever be. The difficulty changes every 2016 blocks.
The following is the formula, which calculates the difficulty:
difficulty = maximum_target / current_target
(target is a 256 bit number)
What is the maximum difficulty?
The maximum difficulty is roughly: maximum_target / 1, which is a ridiculously huge number (about 2^224).
The actual maximum difficulty is when current_target=0, but we would not be able to calculate the difficulty if that happened. (fortunately it never will, so we’re ok.)
Can the difficulty go down?
Yes it can. See discussion in target.
What is the minimum difficulty?
The minimum difficulty, when the target is at the maximum allowed value, is 1.
For more information on Difficulty please see: https://en.bitcoin.it/wiki/Difficulty
I also suggest reading about Blocks: https://en.bitcoin.it/wiki/Block
3.4 HOW
WILL THE DIFFICULTY LEVEL AFFECT MY BITCOIN MINING?
A simple answer:
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 10
By Eric Zhivalyuk
The higher the difficulty rate is, the harder is is to create Bitcoins. There, that was simple
If you want more detailed information, see section 3.3 above.
Hardware
4.1 WHAT
KIND OF HARDWARE DO I NEED?
In order to mine for Bitcoins, you generally need the same hardware as a regular computer such as: Motherboard, CPU, Power Supply, Memory (RAM), GPU, Harddrive OR
USB Flash drive
Additionally you may need some other components such as: Ethernet cable, Keyboard, Mouse, and Monitor. The Keyboard, Mouse, and Monitor components are only required
for the initial setup and configuration, and do not need to be connected in order to actually continue mining.
Some other components are optional such as a computer case, Hard drive, and CD-Rom drive.
4.2 WHAT
IS THE BEST HARDWARE TO GET FOR MY BUCK?
I won’t spend too much time on this question because there is an extremely helpful list of hardware for example Bitcoin mining rigs, and where to purchase. It is posted below:
I also provide a list of the exact hardware that I purchased for my rigs in section 4.4 below. I did a lot of research before buying my hardware, although I did not see the list
shown below before making my purchases, so consider yourself lucky! Prices are always changing and hardware always goes down in cost, so I definitely encourage you to do
some research on your own too.
Here are a few main things to keep in mind:
Motherboard: You want find a motherboard with as many PCIe x16 or PCIe x8 slots as possible. This will determine how many GPUs you will be able to use in your rig.
CPU: Although we are going to be using our GPUs to mine for Bitcoins, you still need a decent CPU in order to keep the machine stable. I would reccomend any of the
following types of CPUs in order from worst to best: Dual Core, Quad Core, Corei3, Corei5, Corei7. I listed only intel CPUs since they are most common. Here is a great
resource for CPU benchmarks / prices: http://www.cpubenchmark.net/
GPU: This will be your most important investment since it is the main factor in dtermining
RAM: You don’t need much ram at all 1-2 GB should be just fine.
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 11
By Eric Zhivalyuk
This list of hardware is from: https://en.bitcoin.it/wiki/Mining_rig
Typical Dedicated Miner Configurations Using a Tower
One ATI 5830, Approximately 245 Mhash/s
Component
Description
Source
n/a
Amount
Chassis
n/a
Power Supply
Rosewill Green Series RG530-S12 530W, 80 PLUS Certified NewEgg
$50
Motherboard
Foxconn M61PMP-K AMD
NewEgg
$45
CPU
AMD Sempron 140
NewEgg or Amazon
$38
Memory
2GB DDR3
NewEgg
$17
Graphics card
Radeon HD 5830
NewEgg or Amazon($153) $110
Case Fan
n/a
n/a
n/a
Storage
Western Digital Caviar 80GB
NewEgg
$17
Media Drive
DVD Rom Drive
n/a
n/a
n/a
n/a
Keyboard, Mouse and Display n/a
Total
(Approx: $1.1755 /Mhash)
n/a
$288 + s/h/t
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 12
By Eric Zhivalyuk
Three ATI 5770s, Approximately 630 Mhash/s
Component
Description
Source
Amount
Power Supply Rosewill Green Series RG530-S12 530W, 80 PLUS Certified NewEgg
$50
Motherboard
ASRock 890GX EXTREME4
NewEgg
$125
CPU
AMD Sempron 130
NewEgg
$30
Memory
2GB DDR3
NewEgg
$17
Graphics card Sapphire Radeon HD5770 1GB DDR5
superbiiz orAmazon $339 ($113 x 3)
Storage
NewEgg
Total
$17
$578 + s/h/t
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 13
By Eric Zhivalyuk
Two ATI 5850s, Approximately 600 Mhash/s
Component
Description
Source
n/a
Amount
Chassis
n/a
Power Supply
CORSAIR Builder Series CX600 V2 600W , 80 PLUS Certified NewEgg
$70
Motherboard
MSI 870-G45 AM3 AMD 770 ATX
Amazon or NewEgg ($5 more)
$70
CPU
AMD Sempron 140
NewEgg or Amazon (same price) $39
Memory
2GB DDR3
NewEgg
$17
Graphics card
Sapphire Radeon HD 5850 XTREME
Amazon
$322 ($161 x 2)
Case Fan
n/a
n/a
n/a
Storage
NewEgg
$17
Media Drive
DVD Rom Drive
n/a
n/a
n/a
n/a
Total
n/a
$535 + s/h/t
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 14
By Eric Zhivalyuk
Three ATI 5850s, Approximately 900 Mhash/s
Component
Description
Source
n/a
Amount
Chassis
n/a
Power Supply
PC Power & Cooling Silencer Mk II 950W, 80 PLUS Silver Certified Directron
$120
Motherboard
MSI 890FXA-GD70
Amazon
$195
CPU
AMD Sempron 140
NewEgg orAmazon $39
Memory
2GB DDR3
NewEgg
$17
Graphics card
Sapphire Radeon HD 5850 XTREME
Amazon
$483 ($161 x 3)
Case Fan
n/a
n/a
n/a
Storage
NewEgg
$17
Media Drive
DVD Rom Drive
n/a
n/a
n/a
n/a
Total
n/a
$871 + s/h/t
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 15
By Eric Zhivalyuk
Three ATI 6990s, Approximately 2.1 Ghash/s
Component
Description
Source
Amount
Chassis
CoolerMaster HAF X
Amazon
$179
Power Supply
SILVERSTONE ST1500 1500W, 80 PLUS Silver Certified Newegg
$365
Motherboard
MSI 890FXA-GD70
Amazon
$195
CPU
AMD Sempron 140
NewEgg orAmazon $39
Memory
2GB DDR3
NewEgg
$17
Graphics card
3 * Radeon HD 6990
NewEgg
$2220 ($740 × 3)
Storage
NewEgg
$17
Total
$3,032 + s/h/t
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 16
By Eric Zhivalyuk
Typical Dedicated Miner Configurations Using a Rack Mount
Budget AMD Sempron / Dual ATI 6990: Approximately 1.4 Ghash/s
Component
Description
Source
Amount
Chassis
IPC-4370S 4U
P-Link Computer
$85 (incl s/h)
Power Supply
PC Power & Cooling Silencer Mk II 950W, 80 PLUS Silver
Certified
Directron
$120
Motherboard
MSI 870-G45 AM3 AMD 770 ATX
Amazon or NewEgg ($5
more)
$70
CPU
AMD Sempron 140
NewEgg or Amazon
$39
Memory
2GB DDR3
NewEgg
$17
Graphics card
2 * Radeon HD 6990
NewEgg
$1480 ($740 ×
2)
Storage
NewEgg
$17
Keyboard, Mouse and
Display
n/a
Total
$1,828 + s/h/t
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 17
By Eric Zhivalyuk
Typical Multipurpose Miner Configurations
High-end Intel-based miner/gaming rig: single ATI 6990, Approximately 750 Mhash/s
Component
Description
Source
Amazon
Amount
Chassis
CoolerMaster HAF 932
$140
Power Supply
PC Power & Cooling Silencer Mk II 950W, 80 PLUS Silver Certified Directron $120
Motherboard
MSI P67A-GD65
Amazon
$173
CPU
Intel i5-2500k
Amazon
$220
Memory
G.SKILL Value Series 4GB
NewEgg
$30
Graphics card Radeon HD 6990
NewEgg
$734
Heat Sink Fan CoolerMaster Hyper212+
NewEgg
$40
Storage
Seagate 1TB 7200RPM HDD
NewEgg
$70
Media Drive
ASUS DVD-RW
NewEgg
$22
Keyboard
LITE-ON SK-1788/BS PS/2 Keyboard
NewEgg
$8
Mouse
V7 M30P20-7N PS/2 Mouse
NewEgg
$7
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 18
By Eric Zhivalyuk
Component
Display
Description
LG IPS231P-BN Black 23″ 6ms IPS
Source
NewEgg
Total
Amount
$250
$1814 + s/h/t
High-end AMD-based miner/gaming rig: single ATI 6990, Approximately 750 Mhash/s
Component
Description
Source
Amazon
Amount
Chassis
CoolerMaster HAF 932
$140
Power Supply
Motherboard
Biostar TA890FXE
NewEgg
$140
CPU
AMD Phenom II x6 1100T Black Edition
Amazon
$190
Memory
NewEgg
$30
Graphics card Radeon HD 6990
NewEgg
$734
Heat Sink Fan CoolerMaster Hyper212+
NewEgg
$40
Storage
NewEgg
$70
Media Drive
ASUS DVD-RW
NewEgg
$22
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 19
By Eric Zhivalyuk
Component
Description
Source
Amount
Keyboard
NewEgg
$8
Mouse
NewEgg
$7
Display
LG IPS231P-BN Black 23″ 6ms IPS
NewEgg
$250
Total
$1760 + s/h/t
Mid-level AMD-based miner/gaming/workstation rig: single ATI 6870, Approximately 300 Mhash/s
Component
Description
Source
NewEgg
Amount
Chassis
CoolerMaster Centurion 5
$50
Power Supply
Motherboard
ASRock 890GX Pro3
NewEgg
$110
CPU (incl. stock heatsink + fan) AMD Phenom II X4 955 Black Edition
NewEgg
$114
Memory
NewEgg
$30
Graphics card
Radeon HD 6870
Amazon
$165
Storage
NewEgg
$70
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 20
By Eric Zhivalyuk
Component
Description
Source
Amount
Media Drive
ASUS DVD-RW
NewEgg
$21
Keyboard
NewEgg
$8
Mouse
NewEgg
$7
Display
HANNspree By Hanns-G HF225DPB 21.5″
NewEgg
$120
Total
$815 + s/h/t
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 21
By Eric Zhivalyuk
Mid-level Intel-based miner/gaming/workstation rig: single ATI 6870, Approximately 300 Mhash/s
Component
Description
Source
Amount
Chassis
CoolerMaster Centurion 5
NewEgg $50
Power Supply
Antec Earthwatts EA-650 GREEN 650W, 80 PLUS BRONZE certified NewEgg $65
Motherboard
MSI PH67S-C43 (B3)
NewEgg $85
CPU (incl. stock heatsink + fan) Intel Core i3-2100
Amazon $122
Memory
NewEgg $30
Graphics card
Radeon HD 6870
Amazon $165
Storage
NewEgg $70
Media Drive
ASUS DVD-RW
NewEgg $21
Keyboard
NewEgg $8
Mouse
NewEgg $7
Display
HANNspree By Hanns-G HF225DPB 21.5″
NewEgg $120
Total
$743 + s/h/t
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 22
By Eric Zhivalyuk
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 23
By Eric Zhivalyuk
4.3 AM
I CAPABLE OF BUILDING THESE MACHINES FROM SCRATCH?
The first question I would ask is: Have you ever built your own computer? If the answer is yes, then there is probably no reason why you can’t build a Bitcoin mining machine
yourself either. It requires standard desktop hardware, just like you would use to build a personal computer.
Here is a very cool 3 minutes video of “phreneticdotnet” building a bestly bitcoin mining rig!
http://youtu.be/nfwbeastYRo
If you have never built your own computer, I’m not sure whether or not I should encourage you to move forward and try to build one. If you have a friend or colleague with
experience who can help you out, I would say don’t hesitate! Even if you are pretty handy with electronics, and know about computers or the components that comprise them,
then here are a few guides on how to build your own computer:
http://www.build-your-own-computers.com/
http://www.kitchentablecomputers.com/started.php
http://www.build-gaming-computers.com/
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 24
By Eric Zhivalyuk
http://www.pcworld.com/article/203950/how_to_build_your_own_pc_part_1.html
http://www.youtube.com/watch?v=QQQ30QoF_-8
There are plenty of resources out there, do some googling: “How to build your own computer”.
4.4 WHAT
EXACT HARDWARE DID YOU USE FOR YOUR BITCOIN MINERS?
Below is the exact hardware that I bought for my rigs. You will notice that the graphics cards that I purchased for my rigs may currently out of stock on Newegg (ASUS Radeon
6950). However, we will discuss various other graphic card choices in the next section. There are even better cards available but all depends on your budget. Also, I am aware
that I could have gotten some of these compnents slightly cheaper if I shopped around more. The bottom line is I like Newegg They are prompt, shipping is fast, and always
reliable. I’d rather buy all my parts from the same vendor, and 99% of the time it isNewegg.com.
Image
Unit
Price
Product Description
Antec Nine Hundred Black Steel ATX Mid Tower Computer Case
Model #:Nine Hundred
Item #:N82E16811129021
Return Policy:Limited Replacement Only Return Policy
In Stock
Mail in Rebate
$105.99
SAPPHIRE PURE Black P67 LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Model #:PURE Black P67
Item #:N82E16813154018
Return Policy:Standard Return Policy
$229.99
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 25
By Eric Zhivalyuk
Image
Unit
Price
Product Description
In Stock
Mail in Rebate Card
ASUS EAH6950 DCII/2DI4S/1GD5 Radeon HD 6950 1GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support
Video Card …
Model #:EAH6950 DCII/2DI4S/1
Item #:N82E16814121437
Return Policy:VGA Standard Return Policy
Out Of Stock
Mail in Rebate Card
$269.99
KINGWIN Mach 1 ABT-1220MA1S 1220W ATX / BTX SLI Ready Modular Active PFC Power Supply
Model #:ABT-1220MA1S
Item #:N82E16817121040
Return Policy:Standard Return Policy
In Stock
$259.99
Intel Core i5-2400 Sandy Bridge 3.1GHz (3.4GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor BX80623I52400
$194.99
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 26
By Eric Zhivalyuk
Image
Unit
Price
Product Description
Model #:BX80623I52400
Item #:N82E16819115074
Return Policy:CPU Replacement Only Return Policy
In Stock
G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D4GBNQ
Model #:F3-12800CL9D-4GBNQ
Item #:N82E16820231193
Return Policy:Memory Standard Return Policy
In Stock
$43.99
GPU Mining
5.1 WHERE
CAN I COMPARE GRAPHICS CARDS (GPUS)?
The following link, is a VERY important one. It should be your bible in choosing, and comparing available GPUs that are on the market:
https://en.bitcoin.it/wiki/Mining_hardware_comparison
Luckily, they recently added “20 Popular Mining Cards” to this document, I’ll include it below. This wiki page lists out every GPU, the model, the mhash/s (discussed in section
5.3), the slot type, watts, clock, and other notes related to overclocking and configuration.
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 27
By Eric Zhivalyuk
Mhash is explained in the next section: 5.3
•
Mhash/s: millions hashes per second (raw speed performance ; may not be very energy efficient with some models)
•
Mhash/J: millions hashes per joule (energy efficiency ; 1 joule of energy is spent for 1 watt in 1 second)
•
Watts: (maximum power consumption, i.e. energy per unit of time : 1 W = 1 J/s)
•
Clock: (in MHz) refers to the Shader clock only with nVidia cards (not Core or Memory). With AMD card the shader clock is not separate, but is part of the GPU clock.
•
Stream processors (SP): (Shader Units)
Keep this in mind:
Mhash/s: The main goal you want to achieve is lowest cost vs highest mhash rate. The more mhash/s (megahash per second) a GPU can produce the faster is can calculate
and process Bitcoin data.
Watts: Another thing to note are watts. Your computers power supply must have enough watts in order to power these cards. If you have 3 GPUs that use 200 watts, but only
have a 500 watt power supply 1 of two things will happen. It won’t power up properly and some components in the machine will not get enough power. Or YOU CAN BLOW
OUT THE POWER SUPPLY. Yes that’s right, it has happened to me. At one point I drew more power than the power supply (PSU) could handle, and my machine shut off,
permanently. Well, until I replaced the power supply, which is a pain in the ass considering it is wired up everywhere inside the machine.
Slots: Some GPUs have different slot or plug configurations. The most common for high performace GPUs are PCIe x 16 or PCI x 8. Make sure your motherboard has these
slots so you will be able to plug your GPUs in.
5.2 20
POPULAR MINING GPUS
Model
Price
Availability Avg. Mhash/s Mhash/J Mhash/$
5770
$136
Moderate
212.83
1.45
1.56
5830
$129.99 Moderate
286.45
1.4
1.59
5850
$161
Limited
325.49
1.73
2.02
5870
$350
Limited
393.46
1.9
1.12
5970
$730
V. Limited
655.83
2.01
0.90
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 28
By Eric Zhivalyuk
Model
Price
6750
$116
Easy
167.59
1.44
6770
$137
Easy
196.67
1.44
6850
$160
Easy
213.7
1.35
1.34
6870
$190
Easy
278.31
1.73
1.46
6950
$250
Easy
360.62
1.8
1.44
6970
$350
Easy
389.55
1.72
1.11
6990
$770
Limited
758.82
1.91
0.99
5830×2 $360
Moderate
525
5850×4 $644
Limited
1360
1.94
2.11
5870×2 $700
Limited
787.5
0.84
1.13
6770×2 $274
Easy
464
6950×4 $1,000
Easy
1316
1.46
1.69
1.51
1.32
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 29
By Eric Zhivalyuk
Model
Price
6970×2 $700
Easy
769
~1.6
1.10
6990×2 $1,540
Limited
1568
~1.7
1.02
6990×3 $2,310
Limited
2094
~1.8
0.91
5.3 WHAT
IS MHASH RATE?
Mhash/s means megahashes per second, or 1,000,000 hashes per second, which is the raw speed performance each GPU is capable of. As mentioned previously, The more
mhash/s (megahash per second) a GPU can produce the faster is can calculate and process Bitcoin data. There really is not much more to know
Also, you might see the term gigahash as well, or ghash/s. This is equal to 1000 mhash/s.
5.4 WHAT
ARE STREAM PROCESSORS?
Stream processing is a computer/hardware programming technique that allows some applications to more easily exploit a limited form of parallel processing.
Most new video cards have stream processors. Basically video cards have different shaders that are used as small processors to process parts of the image, a stream
processor is a generic shader that can be turned into a specific shader on demand (depending on the need). The stream processor is what does a huge portion of the actual
rendering. So basically each stream processor is like a processor for a video card. Doubling the number of stream processors does pretty much double the speed of the video
card for rendering stuff
Learn more about stream processing here: http://en.wikipedia.org/wiki/Stream_processing
5.5 WHY
ARE AMD (ATI) GPUS BETTER THAN NVIDIA GPUS FOR BITCOIN MINING?
Firstly, AMD designs GPUs with many simple ALUs/shaders (VLIW design) that run at a relatively low frequency clock (typically 1120-3200 ALUs at 625-900 MHz), whereas
Nvidia’s microarchitecture consists of fewer more complex ALUs and tries to compensate with a higher shader clock (typically 448-1024 ALUs at 1150-1544 MHz). Because of
this VLIW vs. non-VLIW difference, Nvidia uses up more square millimeters of die space per ALU, hence can pack fewer of them per chip, and they hit the frequency wall
sooner than AMD which prevents them from increasing the clock high enough to match or surpass AMD’s performance. This translates to a raw ALU performance advantage
for AMD:
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 30
By Eric Zhivalyuk
AMD Radeon HD 6990: 3072 ALUs x 830 MHz = 2550 billion 32-bit instruction per second
Nvidia GTX 590: 1024 ALUs x 1214 MHz = 1243 billion 32-bit instruction per second
This approximate 2x-3x performance difference exists across the entire range of AMD and Nvidia GPUs. It is noticeably visible in all ALU-bound GPGPU workloads such as
Bitcoin, password bruteforcers, etc.
Secondly, another difference favoring Bitcoin mining on AMD GPUs instead of Nvidia’s is that the mining algorithm is based on SHA-256, which makes heavy use of the 32-bit
integer right rotate operation. This operation can be implemented as a single hardware instruction on AMD GPUs, but requires three separate hardware instructions to be
emulated on Nvidia GPUs (2 shifts + 1 add). This alone gives AMD another 1.7x performance advantage (~1900 instructions instead of ~3250 to execute the SHA-256
compression function).
Combined together, these 2 factors make AMD GPUs overall 3x-5x faster when mining Bitcoins.
Networking
6.1 WHAT
KIND OF INTERNET CONNECTION TO I NEED?
You don’t need any special or crazy fast internet connection or configuration. Any standard high speed internet connection should be able to handle many Bitcoin miners just
fine. I would recommend 5mbps+.
Also, I would recommend that all Bitcoin miners are connected through a wired internet connection for stability and reliability. I’ve has some spotty issues using wifi for bitcoin
mining, it’s simply not worth the hassle.
6.2 DO
I NEED TO CONFIGURE MY FIREWALL TO RUN BITCOIN?
Bitcoin will connect to other nodes, usually on tcp port 8333. You will need to allow outgoing TCP connections to port 8333 if you want to allow your Bitcoin client to connect to
many nodes. Bitcoin will also try to connect to IRC (tcp port 6667) to meet other nodes to connect to.
If you want to restrict your firewall rules to a few ips and/or don’t want to allow IRC connection, you can find stable nodes in the fallback nodes list. If your provider blocks the
common IRC ports, note that lfnet also listens on port 7777. Connecting to this alternate port currently requires either recompiling Bitcoin, or changing routing rules. For
example, on Linux you can evade a port 6667 block by doing something like this:
echo 173.246.103.92 irc.lfnet.org >> /etc/hosts
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 31
By Eric Zhivalyuk
iptables -t nat -A OUTPUT -p tcp --dest 173.246.103.92 --dport 6667 -j DNAT --to-destination :7777 -m comment --comment "Bitcoind irc connection"
6.3 HOW
DOES THE PEER FINDING MECHANISM WORK?
Bitcoin finds peers primarily by connecting to an IRC server (channel #Bitcoin on irc.lfnet.org). If a connection to the IRC server cannot be established (like when connecting
through TOR), an in-built node list will be used and the nodes will be queried for more node addresses.
Cooling
7.1 HOW
AM I GOING TO KEEP THESE RIGS COOL?
This is not to be overlooked, and is a major concern among people who mine for Bitcoins. The first step in keeping your rigs cool is to regulate the temperature of the room
that your miners will be housed. I discuss the details of regulating room temperature in the next section 7.2.
If you already have your room controlled at a reasonable temperature, then here are several other suggestions to keep your rigs running cool.
Computer Casing: Although I’ve seen MANY rigs laying around without a case, I would certainly recommend keeping your hardware protected inside of a PC case. Exposed
hardware is never really a safe option, especially if you have kids, pets, or other factors that could come in contact with your hardware. Assuming you are going to case your
rig, getting a good computer case is important for keeping the hardware cool. I recommend getting high performance gaming cases / enclosures from brands like Antec, and
Thermaltake. As you can see from the hardware above in section 4.4, I have chosen the Antec 900 ATX Mid Tower case. This case has multiple fans and is optimized for
airflow…
1 x 120mm TriCool rear fan with 3-speed switch control
2 x 120mm TriCool blue LED front fans with 3-speed switch control to cool HDDs
1 x 200mm top fan
I liked the fan setup because all the hot air is exhausted from the back, and top of the cases. This gives me a predictable direction of where my hot air will be moving towards.
Also, be sure to keep your wiring inside the case clean. Bulky clumps of wires will block airflow!
More / upgraded fans: I have taken an extra step, and installed 3 more high performance fans in my cases.
2 Vantec Tornado Fans which are placed internally right in front of the 2 x 120mm fans displayed on the front of the case.
As well, as a 120mm Ultra Kaze fan on the inside of the side panel vent.
Let me just tell you, this rigs are LOUD. They sound like mini jet engines. Hopefully you have a basement or somewhere you could keep them where the noise should not be
an issue. Here are the specs of the fans:
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 32
By Eric Zhivalyuk
Vantec Tornado 92mm Double Ball Bearing High Air Flow Case Fan – Model TD9238H
RPM: 4800 RPM
Air Flow: 119 CFM
Noise: Level 56.4 dBA
Scythe DFS123812-3000 “ULTRA KAZE” 120 x 38 mm Case Fan
RPM: 3000 RPM
Air Flow: 133.60 CFM
Noise Level: 45.90 dBA
As I said before, the main factor in keeping this rigs cool is keeping the room cool. Good airflow, and good temperature should be all you need to keeping things cool. Check
out the section below for how to keep the room cool.
7.2 HOW
AM I GOING TO KEEP THE ROOM COOL?
Keeping the room cool is going to have its challenges, especially if you plan on running 2+ mining rigs in there. These machines basically turn into little heaters, which are
exhausting hot air 24/7.
I would suggest trying to keep the room temperature 75°F and below. 71°F would be ideal, and I would s ay 82°F being the max.
Air conditioning: Hopefully this is something you have in your home, if not, my empathy goes out to you and your miners!
Obviously this would be the first step into
keeping any room in your home cool. So make sure you keep your rigs in a cool room, basements are ideal.
Air Duct Booster: This is a little trick I’ve learned over the past, but I’ve taken it a step further in my Bitcoin mining scenario. In order to get the most out of the cool air being
sent from the air conditioner through the ducts, I have removed the metal casing that cover most vents, and placed a high powered fan a few feet inside the of air duct. Then I
have attached an aluminum wired air hose, with an air tight seal using duct tape, and attached another high powered fan on the end of it. At this point, I have a hose which I
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 33
By Eric Zhivalyuk
can direct in any direction which is literally blasting cool air!
Box Fans / Oscillating Fans: Large oscillating are good to keep near your rigs, they are very good circulating large amounts of airflow around the room, and preventing the
room from getting stale.
Room Exhaust Fan: If you plan on keeping your rigs in a closed room, you better be up for the challenge. Even if you have an air conditioning supply to the closed room, it will
constantly be battling with the heat from your miners (depending on how many you have). In my case, I am keeping my rigs is in a pretty small room, which is enclosed. After
many tests, and attempts to keeping the room cool, I had no choice but to build an exhaust system. Basically, I cut a large circular hole in the wall closest to where the miners
would be flushing out hot air. Then I place an industrial exhaust fan which would suck the hot air out of the room. Yes, I am making sound a lot simpler than it actually was.
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 34
By Eric Zhivalyuk
Here is a pic:
I’m sure there are other tips and tricks, but these are some that I use. If it is winter time and yo
you
u have a window nearby, it would be okay to keep that cracked to let cool air in,
although it is not recommended to keep hardware exposed to natural outdoor weather. In doing so, you can start dealing with o
other
ther issues such as humidity, which will factor in
i
on hardware performance and shelf life.
7.3 HOW
DO I MEASURE ROOM
M TEMPERATURE?
Easiest thing to do is to get yourself a Digital Temperature Monitor
If you are not onsite and want to checkk the temperature remotely you can get one of these USB Temperature Sensors.. Personally I use the Hid TEMPer V10.6.0: It is a
measurement device using a USB port to connect to a computer or other machines. Here is a screenshot:
7.4 HOW
HOT WILL MY GPUS GET AND CAN THEY OVE
OVERHEAT?
At full load, your GPUs will get HOT!
I’ve seen GPUs go up to 92°C+ (That’s 198 °F). Idea l temperature for your cards would be about 73°C or lower.
---------------------------------------------------------------------------------------------------------------- -----------------------------------------------------------------------------------------------------------------------Page 35
Visit http:://www.bitcoinrumors.com for latest Bitcoin news and rumors
By Eric Zhivalyuk
Yes GPUs can overheat! That is why it is so important to keep your room and rigs cool, so your GPUs have optimal temperatures to operate in. Cooler GPUs will output better
performance, and that is the goal, isn’t it?
A common problem I have had with my GPUs, is that they are SO close together. Cramming 3 GPUs in a mid-tower case was not easy. There needs to be sufficient space
between the cards so that the fans which are cooling the heat sinks have enough airflow. I used small pieces of thick rubber tubing to pry apart each card, so that I would have
at least half and inch between each GPU.
7.5 HOW
CAN I CHANGE THE FAN SPEED ON MY GPUS?
This depends on your operating system. Whether you are using Windows or Linux, you must have ATI Catalyst software installed. Please see section 11.2 for more info on
how to obtain and install it.
If you are using Windows: Assuming already have the ATI Catalyst Control Center installed, you can look through the OverDrive™ settings, and adjust the fan speed of the
cards. If noise is not an issue I recommend 100% for maximum cooling.
If you are using linux: you can use the following commands to increase the speed of your fans. In the below example we will be setting the first available GPU in the machine
to 100% fan speed:
DISPLAY=:0.0 aticonfig --pplib-cmd "set fanspeed 0 100"
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 36
By Eric Zhivalyuk
Notice, that the first GPU is identified as: 0.0
If you wanted to run the same for the second and third card you can do so like this:
DISPLAY=:0.1 aticonfig --pplib-cmd
cmd "set fanspeed 0 100"
DISPLAY=:0.2 aticonfig --pplib-cmd
cmd "set fanspeed 0 100"
7.6 HOW
DO I MEASURE GPU TEMPERATURES?
In Windows: Measuring your GPU temperature is relatively easy. If you have ATI Catalyst installed (if not see section 11.2), you can check
chec the GPU temperature by opening
the ATI Catalyst software, and finding the OverDrive setting (Screenshot above). On that screen you will be able to see the temperatu
temperature
re of the GPU usually measured in
Celcius. Overclocking your GPU can affect the temperature, and is discussed in section 9.
Anotherr way that I like to measure my GPU temperature in Windows 7 is through GPU Observer, which is a desktop gadget that you can download and display right on your
desktop. It shows the temps, fan speed, and memory usage – very useful!
In linux: You can run the following command to get the temperature of all the GPUs in the system:
DISPLAY=:0.0 aticonfig --odgt --adapter=all
It will return results that look like this… (Look at the 3rd GPU Temps, 57.5°C – NOT BAD!!
)
---------------------------------------------------------------------------------------------------------------- -----------------------------------------------------------------------------------------------------------------------Page 37
By Eric Zhivalyuk
Power
8.1 HOW
MUCH POWER WILL I NEED?
Of course, this question depends on how many machines / GPUs you plan on running. My machines currently have 3 GPUs installed, with a 1200 Watt power supply. Currently
each machine at full load utilizes about 6 Amps, about 700 Watts, which is 0.7 KW (Kilowatts).
An average size residential circuit breaker is about 20 Amps. If you exceed 20 Amps of power on a 20 Amp circuit breaker, you will cause too much power to be drawn, and the
circuit breaker will shut off to prevent damage or other failures. Therefore, it is important that you are aware of how much power is available on the circuit which your miners will
be plugged into.
In my scenario, I originally only had about 20 Amps, and I needed to power 3 Machines. Although each machine was only using about 6 Amps a total of 18 Amps, the circuit
breaker would still shut off periodically. Sometimes the Amp usage could jump for just a second, and it would be enough to trigger the circuit breaker to shut off. Due to this, I
had to install additional circuit breakers, and fish some new lines to the room that was powering my Bitcoin Miners. You always want to leave a little overhead, and not max out
the lines. Below are some pictures of the process in running new lines, leaving me at a total of about 80 Amps.
WARNING: If you are unsure how to install a new circuit breaker, or run your own electric lines please consult the assistance or services of a professional electrician! If you are
capable of handling this yourself, here are some helpful links:
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 38
By Eric Zhivalyuk
•
Installing a circuit breaker
•
How to fish electrical wire through ceiling
WARNING: Be sure that you evenly supply power to your GPUs! I made the mistake of running too many watts through a single wire supplied from the power supply. I had
various other connections, including a molex splitter which was plugged in to other devices such as fans etc and eventually connecting to the GPU(s). Due to the fact that there
was so much power draw through one wire, they quickly burned out, and could have caused serious damage or electrical fire. I would stay away from using any splitter
connecters or thin wires when powering your GPUs. – I learned the hard way. Thankfully no serious damage occurred, just needed to replace the wires.
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 39
By Eric Zhivalyuk
8.2 HOW
MUCH WILL MY POWER BILL GO UP?
Your electric bill WILL increase.
In order to figure out how much you will be paying additionally for your electric bill each month we need to do some basic math.
Here’s what we need:
•
How many watts each machine is using
•
How much your energy provider charges for KWh (Kilowatt per hour)
•
Duration of time that the machines are running.
We’ll use my setup as our scenario:
•
Each machine uses 700 Watts
•
My energy provider charges about $0.10 KWh (10 cents)
•
My machines are running 24/7
Here is our math:
700 Watts × 24 hours × 30 days = 504,000 watt hours
Then we do 504,000 ÷ 1000 x $0.10 = $50.4
Since I have 3 machines I would do $50.4 × 3 = $151.2
Total monthly cost: $151.2
8.3 HOW
DO I MEASURE MY POWER USAGE?
Measuring your power utilization is very easy. I purchased this handy gadget called the “Kill A Watt Electricity Load Meter and Monitor.” It costs $30 on newegg, here is a
linkhttp://www.newegg.com/Product/Product.aspx?Item=N82E16882715001. You can monitor Volts, Amps, Watts, Hz, and VA. There are various products like this one
available, so find one that suites you.
That’s all you need to find out how much power resources each machine is using. Be sure to monitor the usage at full load.
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 40
By Eric Zhivalyuk
Overclocking
9.1 WHAT
IS OVERCLOCKING?
Overclocking is a term used when running a microprocessor faster than the speed for which it has been tested and approved. Overclocking is a popular technique for
squeezing out a little more performance from a system. In many cases, you can force a GPU to run faster than it was intended. Overclocking does come with some risks,
however, such as over-heating, so you should become familiar with all the pros and cons before you attempt it. Overclocking is also sometimes called speed margining.
Usually when overclocking you are adjusting the following settings:
•
Clock Speed
•
Memory usage
•
Power (voltage)
•
Fan Control
9.2 SHOULD
I USE OVERCLOCKING?
I would say it is pretty safe to overclock any GPU at the right settings, you can certainly get more performance from your GPUs if you overclock.
My current mhash rate was 300 mhash/s by default. After overclocking my GPUs, I was able to get up to 352 mhash/s per GPU, and they run very stable…Not bad! This
process took some trial an error to get the most out of my GPUs without the machine freezing up, but after a few hours of testing, here are my stats:
Default GPU Settings for ASUS ATI Radeon 6950
•
Clock Speed: 810MHz
•
Memory usage: 1250MHz
•
Power (voltage): 110
•
Fan Speed: 50%
Overclock Settings
•
Clock Speed: 900MHz
•
Memory usage: 800MHz
•
Power (voltage): 110
•
Fan Speed: 100%
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 41
By Eric Zhivalyuk
You will notice, I increased the clock speed, which is the overall performance, but, I decreased the memory usage. The reason for this is that high memory usage does not
provide any benefit in Bitcoin mining. By decreasing the amount of memory it will also help with suppressing the heat. Less heat = better. Also, you will notice I turned my fans
up to 100%; this is discussed in section 7.5.
9.3 HOW
DO I OVERCLOCK MY GPUS?
This depends on your operating system. Whether you are using Windows or Linux, you must have ATI Catalyst software installed. Please see section 11.2 for more info.
If you are using Windows: Assuming you already have the ATI Catalyst Control Center installed, you can look through the OverDrive™ settings, and adjust the performance
settings. See the screenshot below:
If you are using linux: here is a great guide that explains how to overclock ATI cards linux by Melcar:http://www.overclock.net/linux-unix/517861-how-overclocking-ati-cardslinux.html. The same instructions are provided below:
I have adjusted the code with my overclock settings for the ATI Radeon HD 6900 series:
This is a small guide for overclocking your ATI card under Linux. This guide targets Ubuntu, but it should be the same for any distro.
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 42
By Eric Zhivalyuk
Pre-requisites:
•
•
Working fglrx driver
Card supported by Overdrive (last time I checked only r6xx and up were supported, mobile and integrate chips excluded)
If you type the command aticonfig in a terminal, you will get several config. options that you can use with the driver, including Overdrive options; the proper synthax is aticonfig
<option>. This is a list of Overdrive related options:
--od-enable
Enables Overdrive.
--od-disable
Disables Overdrive.
You need to restart X for clocks to go back to defaults.
--odgc
List your card's current core and memory clocks, the current peak clocks, and the range by which you can overclock (Overdrive locks are
applicable).
--odgt
Gives out a core temperature reading.
--odsc={NewCoreClock|0,NewMemoryClock|0}
Specify desired clocks fore core and memory.
--odcc
Apply the new clocks specified by the setclocks command
--odrd
Restores default clocks.
You need to restart X for changes to take effect.
Steps for overclocking:
1. The first step obviously is to turn on Overdrive:
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 43
By Eric Zhivalyuk
aticonfig --od-enable
If your card is not supported, you will get a message saying so.
2. Next we get the current clocks and the valid overclocking range for your card:
aticonfig --odgc
Default Adapter - ATI Radeon HD 6900 Series
Core (MHz)
Current Clocks :
810
Current Peak :
810
Configurable Peak Range : [500-950]
GPU load :
Memory (MHz)
1250
1250
[1250-1350]
98%
3. Now we can specify valid frequencies for our overclock:
aticonfig --odsc=900,800
New Core Peak
: 900
New Memory Peak : 800
4. Finally we apply the new frequencies:
aticonfig --odcc
5. Check your new overclock:
aticonfig --odgc
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 44
By Eric Zhivalyuk
Core (MHz)
Current Clocks :
900
Current Peak :
900
Configurable Peak Range : [500-950]
GPU load :
Memory (MHz)
800
800
[1250-1350]
98%
You can also use Overdrive for Crossfire setups. The process is identical, with the difference that you need to specify the device being overclocked. Example:
aticonfig --list-adapters
#each card will be given a number that you append to the normal Overdrive commands
aticonfig --adapter=0 --odgc
#and so on...
Stress Testing
There is also a stress test available for Overdrive. For me this never works and I have yet to get an answer on this from any ATI dev. But you can try it and see if it works for
you:
atiode -P 60 -H localhost:0; echo $?
#runs a stress test for 60 seconds; you can specify whatever time in seconds you want
After the test finishes it will spit out a number. Each number corresponds to a certain status:
0: Test successfully completed.
1: Invalid command-line parameters.
2: Test failed because of rendering errors.
3: Target adapter not found.
4: Test aborted due to unknown reason
Another way of stress testing is to run furmark. It works perfectly under WINE (just make sure you have Compiz off).
Other Tools:
If you don’t like the command line, there are also a pair of third party tools that you can use. Same pre-requisites still apply, since this are just frontends for Overdrive:
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 45
By Eric Zhivalyuk
ATI Overclocking Utility
32bit
64bit
It’s pretty self explanatory. The latest version also has support for Crossfired cards.
AMDOverdriveCtrl
Managing
---------------------------------------------------------------------------------------------------------------- -----------------------------------------------------------------------------------------------------------------------Page 46
By Eric Zhivalyuk
10. 1 USING
A NODE PC TO OVERSEE YOUR BITCOIN MINERS
Currently, I have a dedicated windows machine onsite that I can connect to via, VNC, RDP, or Logmein. This machine is actually my primary node (connection point) for
overseeing my Bitcoin mining rigs. It also is capable of monitoring the temperature in the room.
From this machine I can:
•
Bootup, shutdown, restart, and check the status of all my Bitcoin miners
•
Stop/Start mining software for all or individual GPUs
•
See what speed and mhash/s rate they are running
•
Monitor GPU temperatures
•
Monitor clocks, memory, and voltage
•
Adjust settings such as overclock, fan speeds, and various other scripts that power my Bitcoin miners.
All you need as far as software is Putty to connect to your miners via SSH, and a few bat scripts.
I think it is very important to have a central node where you can control and configure all these things, it makes it a lot easier to manage.
10. 2 HOW
DO I MANAGE MY BITCOIN RIGS?
This is pretty broad question, but I’ll try to go over the basics of what I do to manage my Bitcoin mining rigs.
You want to check on your Bitcoin miners at least every few days to make sure everything is running smoothly. If you keep them close by (in your home), then it will probably
be easier to monitor and manage them. My Bitcoin miners are not kept in my home, so I do my best to stop by the location at least once a week.
Physical check:
•
Ensure all machines are running
•
Ensure all fans are running
•
Check room temperature
•
Check GPU temperatures
Software check:
•
Check Bitcoin proxy (discussed in section 13.1)
•
Check Bitcoin pool accounts (discussed in section 12.1)
•
Check Bitcoin markets
10. 3 CAN
I MANAGE MY BITCOIN MINERS REMOTELY?
The simple answer is: Yes.
If you are using Windows: You can use the following protocols to login to your windows machines remotely to manage your Bitcoin miners: VNC, RDP, or Logmein.
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 47
By Eric Zhivalyuk
If you are using Linux: You can use SSH (Command Terminal), or if you want a visual remote connection, take a look at this article: 7 of the best Linux remote desktop clients
Software
11. 1 WHAT
SOFTWARE CAN I USE TO RUN TO MINE FOR BITCOINS?
Here are my current choices for Windows and Linux mining:
For Windows: I like to use GUIMiner. Screenshot below.
For Linux: I like to use poclbm. Sorry, it’s command based, so no screenshot.
Below is a list of all the popular miners currently out there.
•
GPU
DiabloMiner – http://forum.bitcoin.org/index.php?topic=1721.0
o
Support: Windows, Linux, OSX
Features: Long Polling, BFI_INT
poclbm – http://forum.bitcoin.org/index.php?topic=1334.0
o
Support: Windows, Linux
Features: Long Polling, BFI_INT
hashkill – http://forum.bitcoin.org/index.php?topic=6819.0
o
Support: Linux
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 48
By Eric Zhivalyuk
Features: Long Polling, BFI_INT, Auto Reconnect
Phoenix – http://forum.bitcoin.org/index.php?topic=6458.0
o
Features: Long Polling, BFI_INT, Auto Reconnect
MeteorMiner – http://forum.bitcoin.org/index.php?topic=10353.0
o
•
CPU
Jgarzik – http://forum.bitcoin.org/index.php?topic=1925.0
o
Features: ???
Ufasoft – http://forum.bitcoin.org/index.php?topic=3486.0
o
•
Features: Long Polling, Failover
FPGA
FPGAminer – http://forum.bitcoin.org/index.php?topic=9047.0
o
•
Support: Windows
Features: N/A
Browser-Based
BitJam – http://forum.bitcoin.org/index.php?topic=11549.0
o
Support: Windows, Linux, OSX (Java Implementation)
Features: Browser-based, Embed-able Java Applet
KradMiner – http://forum.bitcoin.org/index.php?topic=9876.0
o
Support: Windows
Features: Firefox Browser-based OpenCL
Bitp.it – http://forum.bitcoin.org/index.php?topic=9042.0
o
Support: Javascript Browers
Features: 100% Javascript
BitcoinPlus.com – http://forum.bitcoin.org/index.php?topic=8780.0
o
•
Features: Browser-based, Embed-able Java Applet
Front Ends
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 49
By Eric Zhivalyuk
GUIMiner – http://forum.bitcoin.org/index.php?topic=3878.0
o
Support: Windows
Features : poclbm, ufasoft, phoenix (phakt support)
AOCLBF (Formerly Phoenix Rising) – http://forum.bitcoin.org/index.php?topic=10264.0
o
Support: Windows
Features: Phoenix (phakt support)
Diablo and RPC for Mac – http://forum.bitcoin.org/index.php?topic=8994.0
o
Support: OSX 10.6+
Features: CLI Frontend Setup
BitMiner – http://forum.bitcoin.org/index.php?topic=12135.0
o
Support: Windows
Features: poclbm, (Planned) Temp readings / usage
11. 2 WHAT
IS ATI CATALYST CONTROL CENTER, AND WHY DO I NEED IT?
The ATI Catalyst Control Center is a 3D acceleration control application that enables you to control the functionality of your graphics card. ATI Catalyst Control Center can be
used to fine-tune your graphic settings, enable or disable connected display devices, and change the orientation of your desktop, etc. Many features present you with a preview
of your changes before they are applied.
The ATI Catalyst Control Center generally comes with graphics driver for ATI graphics card and south bridge driver for ATI chipset (if you have an ATI chipset on your
motherboard). The main advantages of ATI drivers and Tools are their universal compatibility with any ATI graphics card or motherboard. So, the single software you download
for your use can be is only necessary to run any other ATI graphics card (inbuilt or external, PCI or AGP, whatever).
Downloading ATI Catalyst software for your operating system:
If you are using Windows: The appropriate ATI Catalyst Control Center version usually comes with your graphics card, so you may want to check with your vender for a
specific version. OR You can also download this online here: http://sites.amd.com/us/game/downloads/Pages/downloads.aspx.
If you are using Linux: The ATI Catalyst Display Driver can be found here:http://support.amd.com/us/gpudownload/linux/Pages/radeon_linux.aspx. You can use the following
guide on to install it on Ubuntu 10.10: http://forum.bitcoin.org/?topic=3356.msg47489#msg47489, unfortunately this guide is not verified to work on later versions of Ubuntu or
Debian, so you will need to Google around for a guide to help you with that. You can also use your package manager to search and install the latest software.
11. 3 WHAT
OPERATING SYSTEMS CAN I MINE FOR BITCOINS?
You can use both Windows and Linux. Personally, I prefer Linux.
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 50
By Eric Zhivalyuk
I highly recommend using LinuxCoin. It is a small Debian Wheezy based OS created just for the bitcoin community. Linuxcoin has been designed with the average user in mind
and everything is super simple to start using / mining bitcoins. Everything is pre-installed and is ready to go. It saves a lot of work and headache, this is what I use. Best of all, it
can be run directly off a USB flash drive! Which answers our next question…
Get more info here: http://forum.bitcoin.org/?topic=7374.0 Or you can visit the official site here:http://www.linuxcoin.co.uk/
11. 4 CAN
I RUN A BITCOIN MINER FROM A USB FLASH DRIVE?
YES! Use LinuxCoin, please read the section above!
11. 5 AUTOMATION
AND BATCH SCRIPTS
My friend Brandon and I put together a very nice automated script that sets up our entire bitcoin mining environment. It creates various files and utilities that we’ll need to run,
overclock, and monitor our Bitcoin miners.
Please note: This code has only been used / tested on LinuxCoin!
This script does the following (Scroll down to see the “Setup” script):
•
Disables Screen Saver
•
•
Enables AMD Registration
•
Creates startgpu.sh files for each GPU and use settings from the gpuminer.sh
•
Creates mine.sh files which use screen to execute the startgpu.sh
•
Creates maxfans.sh, which boosts all the GPU fans to 100%
•
Creates startallgpus.sh, which can be used to start all GPUs
•
Creates gettemps.sh, which can be used to retrieve the temperature from all GPUs
•
Creates overdrive_profile.ovr, which sets up the overclock settings
•
Creates setclocks.sh, which actually applies the overclock settings
•
After it creates all the files, it sets the proper permissions on files
•
Lastly, it installs screen, and then runs setclocks.sh
Creates gpuminer.sh config files for each indivdual GPU worker
You WILL need to customize this script for your needs!
This code has been setup to use 3 GPUs. You will notice reference to GPU1, GPU2, and GPU3. This is what you’ll need to customize:
•
GPU Count: If you have more or less GPUs, you will need to adjust this script.
•
Username/Password/Pool/Port: You will need to change the username, password, mining pool, and possible the port (-p).
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 51
By Eric Zhivalyuk
•
Clock Settings: These clock settings are optimized for the ATI Radeon HD 6950 GPU. If you do not have this card, you will probably need to adjust your clock settings to
the appropriate frequencies.
I use a Windows machine to execute / monitor all my bitcoin miners. Looks like the following:
I use Putty to configure SSH profiles for each bitcoin miner GPU, and then I use a .bat file to launch which bitcoin miners I want. The .bat file will run putty, automatically login
to the bitcoin mining rig, and launch our command to start running the miner.
First I setup a Putty session for each GPU per machine. For example, M1_GPU1, M1_GPU2, M1_GPU3. Each one of them point to my first Bitcoin mining rig identified as M1.
The IP address of M1 is: 192.168.1.4
Next, I go to the “SSH” menu item on the left, and I tell putty a command to execute upon login. You will see I input: /home/user/mine1.sh. I will set this accordingly to each
GPU, so the second one would simply be: /home/user/mine2.sh, and the third woudl be: /home/user/mine3.sh. This command will actually execute out bitcoin miners to run.
Then, I go to the “Behavior” menu item on the left, and I give each one their appropriate name. This way, when each GPU terminal windows pops up, it has the appropriate title
in the title bar so I can identify it.
Lastly, I go to the “Window” menu item on the left, and I specify the amount of columns and rows, so when the GPU terminal window opens, it will be in nice little square like
you see in the screenshot above.
When we are all done with Putty, I create a .bat file with the following code. This code actually runs putty.exe, then it identifies the profiles we just created in putty, and
automatically logs in to the SSH session using the username “user” and the password “live” (default login with LinuxCoin).
However, remember the /home/user/mine1.sh, we put into the “SSH” menu? When this putty runs, and uses the profile we created, it will automatically run that command, upon
login. That THAT is what executes each GPU miner!
Code for our .bat file:
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 52
By Eric Zhivalyuk
start /SEPARATE putty.exe -load "M1_GPU1" -l user -pw "live"
Create setup script file on linux
To use this code, you will need to create a file on Linux and copy and paste the contents inside. Save it as a .sh file, for example setup.sh. Then you can execute this file by
running:
sudo sh setup.sh
Here is the setup script
#!/bin/bash
# Disable Screen Saver --------------------------------------setterm -blank 0
DISPLAY=:0.0 xset -dpms
DISPLAY=:0.0 xset s 0
sudo killall xscreensaver
# Enable AMD Registration --------------------------------------cd /opt/AMD-APP-SDK-v2.4-lnx64
sudo tar xvfz icd-registration.tgz -C /
cd /home/user/
sudo chmod -R 777 /opt
mkdir /home/user/miners/
# Setup Mining Configs---------------------------------------
cat > /home/user/miners/gpu1miner.sh << EOF
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 53
By Eric Zhivalyuk
#!/bin/bash
export DISPLAY=:0.0
cd /opt/miners/poclbm/;DISPLAY=:0.0 python poclbm.py --user=GPU1 --pass=password --device=0 -o yourbitcoinpool.com -a 5 -p 80 -v -w 128 -f 25
EOF
#!/bin/bash
export DISPLAY=:0.1
EOF
#!/bin/bash
export DISPLAY=:0.2
EOF
# Run Individual GPU's---------------------------------------
cat > /home/user/startgpu1.sh << EOF
#!/bin/bash
export DISPLAY=:0.0
sh /home/user/miners/gpu1miner.sh
EOF
#!/bin/bash
export DISPLAY=:0.1
EOF
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 54
By Eric Zhivalyuk
#!/bin/bash
export DISPLAY=:0.2
EOF
# Define Mine Files---------------------------------------
cat > /home/user/mine1.sh << EOF
#!/bin/bash
screen -s GPU1 -t M1_GPU1 /home/user/startgpu1.sh
EOF
#!/bin/bash
EOF
#!/bin/bash
EOF
# Set Fans to 100% ---------------------------------------
cat > /home/user/maxfans.sh << EOF
#!/bin/bash
EOF
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 55
By Eric Zhivalyuk
# Start all GPUs --------------------------------------cat > /home/user/startallgpus.sh << EOF
screen -dmS GPU1 /home/user/startgpu1.sh &
EOF
# Get Temperature ---------------------------------------
cat > /home/user/gettemps.sh << EOF
echo "GPU1";
DISPLAY=:0.0 aticonfig --pplib-cmd "get temperature 0"
echo "GPU2";
echo "GPU3";
EOF
# Set GPU Clocks (Mhz,Memory,Voltage)---------------------------------------
cat > /home/user/overdrive_profile.ovr << EOF
<?xml version="1.0" encoding="utf-8"?>
<OVERDRIVE_PROFILE>
<PERFORMANCE_LEVEL level="2" gpu="88000" mem="80000" voltage="1100"/>
<FAN_SETTING percentage="100"/>
<FAN_CTRL enabled="no"/>
<FAN_CTRL_CURVE type="0"/>
<FAN_CTRL_POINT nr="0" temperature="2000" percentage="0"/>
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 56
By Eric Zhivalyuk
<MONITOR_SAMPLE_TIME interval="10"/>
<COLOR_PROFILE enabled="no" longitude="-13.000000" latitude="52.000000" color_temp_day="0" color_temp_night="0" transition="30"/>
</OVERDRIVE_PROFILE>
EOF
cat > /home/user/setclocks.sh << EOF
DISPLAY=:0.0 AMDOverdriveCtrl -b -a -i 0 overdrive_profile.ovr
EOF
# Set File Permissions --------------------------------------chmod +x /home/user/setclocks.sh
chmod +x /home/user/gettemps.sh
chmod +x /home/user/startallgpus.sh
chmod +x /home/user/maxfans.sh
chmod +x /home/user/miners/gpu1miner.sh
chmod +x /home/user/startgpu1.sh
chmod +x /home/user/mine1.sh
# Install Screen ---------------------------------------
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 57
By Eric Zhivalyuk
sudo apt-get update;sudo apt-get install screen
# Run Set Clocks --------------------------------------sh /home/user/setclocks.sh
Bitcoin Mining Pools
12. 1 W HAT
ARE BITCOIN MINING POOLS (POOL MINING)?
Pooled mining is an approach where multiple generating clients contribute to the generation of a block, and then split the block reward according the contributed processing
power. Pooled mining effectively reduces the granularity of the block generation reward, spreading it out more smoothly over time.
Pooled mining “pools” all of the resources of the clients in that pool to generate the solution to a given block. When the pool solves a block, the 50 BTC generated by that
block’s solution is split and distributed between the pools participants.
Solo mining is when a miner performs the mining operations alone without joining a pool. All mined blocks are generated to the miner’s credit.
Pros/Cons
Pool Mining Pros
•
•
Pooled mining generates a steadier income.
Pooled mining can generate a 1-2% higher income (before fees, if any) due to long polling provided by the pools.
Pool Mining Cons
•
Pool mining can suffer interruptions from outages at the pool provider.
Pools are subject to DOS attacks and have other downtimes, too. Backup pools and solo mining can be configured for these cases.
•
Pooled mining tends to generate a smaller income due to fees being charged and transaction fees not being cashed out.
There are zero fee pools. Until now, transaction fees are not cashed out by any pool.
•
Pools might be part of attack scenarios.
Solo Mining Pros
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 58
By Eric Zhivalyuk
•
Solo mining is less prone to outages resulting in higher uptime.
•
Solo mining doesn’t incur any fees. For each discovered block, 50 BTC and the transaction fees are paid to the miner.
Solo Mining Cons
•
Solo mining tends to generate more erratic income.
•
Solo mining wastes time due to only supporting getwork pull.
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 59
By Eric Zhivalyuk
See Also
•
Why pooled mining An article in favor of pooled mining.
12. 2 WHAT
ARE THE BENEFITS OF USING A BITCOIN MINING POOL?
With increasing generation difficulty, mining with lower-performance devices can take a very long time before block generation, on average. For example, with a mining speed
of 1000 Khps, at a difficulty of 14484 (which was in effect at the end of December, 2010), the average time to generate a block is almost 2 years.
To provide a more smooth incentive to lower-performance miners, several pooled miners, using different approaches, have been created. With a mining pool, a lot of different
people contribute to generating a block, and the reward is then split among them according to their processing contribution. This way, instead of waiting for years to generate
50btc in a block, a smaller miner may get a fraction of a bitcoin on a more regular basis.
A share is awarded by the mining pool to the clients who present a valid proof of work of the same type as the proof of work that is used for creating blocks, but of lesser
complexity, so that it requires less time on average to generate.
Get all the details here: https://en.bitcoin.it/wiki/Why_pooled_mining
12. 3 DIFFERENT
TYPES AND REWARDS OF MINING POOLS
Reward types and explanation:
PPS – Pay Per Share. Each submitted share is worth certain amount of BTC. Since finding a block requires shares on average, a PPS method with 0% fee would be 50 BTC
divided by . It is risky for pool operators, hence the fee is highest.
SMPPS – Shared Maximum Pay Per Share. Like Pay Per Share, but never pays more than the pool earns. [1]
ESMPPS – Equalized Shared Maximum Pay Per Share. Like SMPPS, but equalizes payments fairly among all those who are owed. [2]
Prop. – Proportional. When block is found, the reward is distributed among all workers proportionally to how much shares each of them has found.
PPLNS – Pay Per Last N Shares. Similar to proportional, but instead of looking at the number of shares in the round, instead looks at the last N shares, regardless of round
boundaries.
Score – Score based system: a proportional reward, but weighed by time submitted. Each submitted share is worth more in the function of time t since start of current round.
For each share score is updated by: score += exp(t/C). This makes later shares worth much more than earlier shares, thus the miner’s score quickly diminishes when they stop
mining on the pool. Rewards are calculated proportionally to scores (and not to shares). (at slush’s pool C=300 seconds, and every hour scores are normalized)
See details here: https://en.bitcoin.it/wiki/Comparison_of_mining_pools
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 60
By Eric Zhivalyuk
12. 4 COMPARISON
OF MINING POOLS?
Personally, I use Bitcoin Pooled Mining (Slush), and Bitcoins.lc. See the rest below and check out this link for details: https://en.bitcoin.it/wiki/Comparison_of_mining_pools
(Sorry, I know this table goes off the page!
Name
DeepBit
BTC Guild
Bitcoin Pooled Mining
(Slush)
Location
Germany
USA, EU
London
)
GHash/sec
4180
2800
1491
Reward
Type
Transfees
PPS /
Prop.
kept by
pool
Prop.
kept by
pool
Score
kept by
pool
Bitcoins.lc
EU
624
Prop.
kept by
pool
Eligius
Germany
500
SMPPS
kept by
pool
Score
kept by
pool
SMPPS
kept by
pool
BTCMine
ArsBitcoin
UK
USA
480
300
Fee PPS
10%
Fee
Prop/Score Audits Protocol Launched Forum Link
3%
0%
2%
0%
0.000001%
2%
0%
?
RPC
(+LP)
2011-0226
Link
Link
?
RPC
(+LP)
2011-0509
Link
Link
?
RPC
2010-1127
Link
Link
?
RPC
(+LP)
2011-0527
Link
Link
Yes
RPC
(+LP)
2011-0427
Link
Link
?
RPC
(+LP)
2011-0311
Link
Link
?
RPC
(+LP)
2011-0615
Link
Link
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 61
By Eric Zhivalyuk
Name
Bitcoin Mining Pool
Location
USA
GHash/sec
272
Reward
Type
Transfees
Fee PPS
Fee
Prop.
kept by
pool
0%
?
RPC
(+LP)
0%
?
RPC
(+LP)
2011-0615
Link
Link
?
RPC
(+LP)
2011-0613
Link
Link
2011-0608
Link
Link
0%
?
RPC
(+LP)
Unknown
Link
Link
2011-0525
12
Link
Mining Team Reddit
(MtRed)
USA, EU
212
Prop
kept by
pool
Mineco.in
UK
170
PPLNS
Shared
Prop.
kept by
pool
0%
?
RPC
(+LP)
1%
?
RPC
(+LP)
2011-0608
Link
Link
?
RPC
(+LP)
2011-0527
Link
Link
?
RPC
(+LP)
2011-0614
Link
Link
PolMine
Poland
150
Bitp.it
USA
100
ESMPPS
kept by
pool
x8s
Germany
95
Prop
kept by
pool
80
Prop.
kept by
pool
50
Prop /
Score
kept by
pool
BitClockers
USA, EU
Eclipse Mining
Consortium
USA /
Europe /
AU / Asia
0%
2%
0%
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 62
By Eric Zhivalyuk
Name
NoFeeMining
Location
USA
GHash/sec
48
Reward
Type
Transfees
RPC
(+LP)
2011-0628
Link
Link
?
RPC
(+LP)
2011-0608
Link
Link
0%
?
RPC
(+LP)
2011-0705
Link
Link
?
?
RPC
(+LP)
2011-0618
Link
?
RPC
(+LP)
2011-0628
Link
?
RPC
(+LP)
2011-0517
45
Prop
kept by
pool
41
Prop
kept by
pool
kept by
pool
rfcpool
UK
29
Prop &
PPS
Btcworld.de
Germany
28
Prop
kept by
pool
Prop
kept by
pool
Score
kept by
pool
Canada
16
Link
Yes
Europe
Continuum
Link
1%
Triplemining
27
2011-0724
?
Score
Germany
Link
1.5%
45
btcmp.com
Link
RPC
(+LP)
France
AUS
?
2011-0617
Shared
PoolMunity
0%
RPC
(+LP)
Prop
kept by
pool
Ozco.in
Fee PPS
Fee
1%
7%
0%
0%
Link
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 63
Link
By Eric Zhivalyuk
Name
Swepool
Location
Sweden
GHash/sec
13
Reward
Type
Transfees
Fee PPS
Fee
Prop
kept by
pool
1%
?
RPC
(+LP)
0%
Yes
RPC
(+LP)
2011-0618
Link
Link
?
RPC
(+LP)
2011-0707
Link
Link
2011-0712
Link
Link
0%
?
RPC
(+LP)
2011-0514
2011-0630
Link
Link
CHWpool
Chile
10
Prop
kept by
pool
BitMinter
USA
10
Prop
kept by
pool
PPLNS
kept by
pool
0%
?
RPC
(+LP)
0%
?
RPC
(+LP)
2011-0709
Link
Link
?
RPC
(+LP)
2011-0701
[4]
Link
No
RPC
(+LP)
2011-0628
Link
Link
Betcoin.co Pool
USA
10
Bitcoinitalia
Italy
4.5
Prop.
kept by
pool
BTCSERV.net
Germany
3
Prop
kept by
pool
Prop.
kept by
pool
Prop
kept by
pool
bestbitcoinminingpool
UnitedMiners
Australia
US
3
3
0%
0%
3%
Link
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 64
By Eric Zhivalyuk
Name
21bitcoin
Location
CN, HK
GHash/sec
2
Reward
Type
Prop.
Transfees
kept by
pool
Fee PPS
Fee
0%
?
RPC
(+LP)
2011-0620
[3]
Link
2011-0617
Link
Link
P2Pool
n/a (P2P)
2
Prop
?
0.5%
?
RPC
(+LP)
Coinotron
Poland
2
Score
kept by
pool
0%
?
RPC
(+LP)
2011-0706
Link
Link
Prop
kept by
pool
?
RPC
(+LP)
2011-0602
Link
Link
?
RPC
(+LP)
2011-0608
Link
Link
?
RPC
(+LP)
2011-0614
Link
Link
Simplecoin
Unknown
1.4
BitLotto Pool
Los
Angeles
1
Prop
kept by
pool
ZA Bitcoin
South
Africa
0.4
Score
kept by
pool
0%
0%
Bitcoin Proxy
13. 1 W HAT
IS A BITCOIN MINING PROXY?
A bitcoin mining proxy is a a multi-pool, multi-worker proxy for Bitcoin miners, supporting long polling and pool failover. This software allows multiple miners to be run against
multiple pools with fail-over to other pools if something happens to a miner’s preferred pool. It requires a web server supporting PHP, and a MySQL database.
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 65
By Eric Zhivalyuk
Here is a link to what seems to be the only good available Bitcoin Mining Proxy:https://github.com/cdhowie/Bitcoin-mining-proxy
13. 2 WHAT
ARE THE BENEFITS OF USING A BITCOIN MINING PROXY?
Failover: If one pool fails, it can automatically switch to another pool.
Centralization: Keeps all your bitcoin miner workers and pools centralized.
One time login setup: You only need to setup your worker logins one time.
Pool toggling: You can switch, enable, or disable a pool at any given time.
Monitoring: Easily monitor live stats, and mhash rates of your miners.
I hope you found this post helpful!
I’ve spent quite some time writing and putting it together
---------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------Page 66

How to build a Bitcoin Mining Rig Cluster By Eric Zhivalyuk

Transcription

Similar documents

Rise of the Underdark

Technology is creating new ways to pay. Are we ready?

Technology is creating new ways to pay. Are we ready?

here

Project Presentation September 2014 - D-Cent

Digital currency in the context of development of Digital Single

here - Nicolas T. Courtois

Bitcoin: how to regulate a virtual currency