How to protect the substations from physical or cyber intrusion Chicago

Transcription

How to protect the substations from physical or cyber intrusion Chicago
How to protect the substations
from physical or cyber intrusion
IEEE T&D 2014
Chicago
2
Substations represent a critical
element of the national infrastructure
aimed at the security and wellness of
the population.
Presenters
• Overview of standards related to cyber
security – Marc Lacroix
• Substation physical security standard – Craig
Preuss
• Development of IEEE PC 37-240 – Mike Dood
• Introduction to Lemnos - Scott D. Sternfeld
Objectives
• Presentation of major threats, physical or virtual, that may
impact the integrity of the substation.
• Introduction to recent development of standards, intended to
mitigate such threats, will be presented.
• Share their experience in the implementation of mitigation
approaches.
• Future standards development, such as Lemnos, will be
described.
Overview of standards related to
cyber security
Marc Lacroix - Vizimax inc.
Complexity of Power Systems
Ref: IEC 62351-10
Office/Power System Security Requirements
Ref: IEC 62351-10
Mapping of Security Standards
Ref: IEC 62351-10
9
ISO 27001
• “Information technology – Security techniques
– Information security management systems –
Requirements”
– specifies a set of information security
management requirements designed to be used
for certification purposes.
10
IEEE 1686
• The standard defines functions and features
that must be provided in substation intelligent
electronic devices to accommodate critical
infrastructure protection programs. It
addresses security in terms of access,
operation, configuration, firmware revision,
and data retrieval from IEDs.
11
ISA99
12
CIGRE D22.2
• Treatment of Information Security for Electric
Power Utilities
– Risk Assessment of Information and
Communication Systems
– Security Frameworks for Electric Power Utilities
– Security Technologies Guideline
13
NIST 800-53
• Recommended Security Controls for Federal
Information Systems
– Provides guidelines for selecting and specifying
technical and organizational security controls and
connected processes for information systems
supporting the executive agencies of the federal
government to meet the requirements of FIPS 200
NERC CIP
CIP
001
002
003
004
005
006
007
008
009
010
011
Title / Content
Sabotage Reporting
Reporting disturbances or unusual occurrences, suspected or determined to be caused by sabotage to appropriate authorities
Critical Cyber Asset Identification
Identification and documentation of Critical Cyber Assets using risk-based assessment methodologies
Security Management Controls
Documentation and implementation of Cyber Security Policy reflecting commitment and ability to secure Critical Cyber Assets
Personnel and Training
Maintenance and documentation of security awareness programs to ensure personnel knowledge on proven security practices
Electronic Security Protection
Identification and protection of Electronic Security Perimeters and their access points surrounding Critical Cyber Assets
Physical Security Program
Creation and maintenance of physical security controls, including processes, tools, and procedures to monitor perimeter access
Systems Security Management
Definition and maintenance of methods, procedures, and processes to secure Cyber Assets within the Electronic Security Perimeter to do
not adversely affect existing Cyber Security Controls.
Incident Reporting & Response Planning
Development and maintenance of a Cyber Security Incident response plan that addresses classification, response actions and reporting
Recovery Plans for Critical Cyber Assets
Creation and review of recovery plans for Critical Cyber Assets
Bulk Electrical System Cyber System Categorization (draft)
Categorization of BES systems that execute or enable functions essential to reliable operation of the BES into three different classes.
Bulk Electrical System Cyber System Protection (draft)
Mapping of security requirements to BES system categories defined in CIP-010
15
62351
IEC 62351
Definition of Security Services
Standardization Status
Part 1
Introduction and overview
Technical Specifications
Part 2
Glossary of terms
Technical Specifications
Part 3
Profiles Including TCP/IP
Technical Specifications
Part 4
Profiles Including MMS
Technical Specifications
Part 5
Security for IEC 60870-5 and Derivatives
Technical Specifications
16
62351
IEC 62351
Definition of Security Services
Standardization Status
Part 6
Security for IEC 61850
Technical Specifications
Part 7
Network and system management
(NSM) data object models
Technical Specifications
Part 8
Role-Based Access Control for Power
systems management
Technical Specifications
Part 9
Data and Communication Security - Key
Management
In preparation
Part 10
Security architecture guidelines
Technical Specifications
Part 11
Security for XML Documents
In preparation
Mapping of IEC 62351 to protocols
Ref: IEC 62351-10
18
Cyber Security Categories
19
Countermeasures
20
21
22
23
24
25
Security Domains
Security
Domain
Required
Protection
Level
Applies to
Example Systems
Public
Low
Assets, supporting the
communication over public networks
3rd party networks,
Internet
Corporate
Medium
Assets, supporting the business
operation with baseline security not
essential to the power system
reliability and availability
Office level business
network
Business
Critical
High
Assets, supporting the critical
operation, which are not critical to
power system reliability and
availability.
Finance network,
human resource
systems, ERP
systems
System
Operation
Critical
Very high
Assets directly related to the
availability and reliability of power
generation and distribution
infrastructure
Control systems,
SCADA networks
Mapping of Security Domains
Ref: IEC 62351-10