Audio / Video

SVGA / SVHS Field Termination Connectors >
Field Installation Products
Often times the use of finished cable assemblies is simply not
possible due to space limitations of existing installation conditions.
In these cases, L-com’s offering of field friendly products are the
perfect solution. Our terminal block HD15 and MD4 products
allow termination of SVGA and S-Video lines without the use of
any special tools and our SVGA low profile disconnect series allow
cable routing through conduit as small as 3/4 inch. These products
will solve your difficult field installation problems.
Item #
Description
1-9
Audio / Video
MD44 Field
Termination
HD15 Field
Termination
SVGA, Low Profile
Disconnect
10-24
25-99
100-249 250-499
DB9, DB25 or HD15 Female Connector for Field Termination - Panel Mountable
These field termination female connectors provide an easy and convenient way to perform field termination of any DB9, DB25 or HD15 cable. Separate
connection points are provided for all positions of the connector plus the ground. Terminal block design with set screws provides reliable electrical
connections without special tools. The terminal block area is clearly marked making proper termination virtually foolproof. Panel mountable for thickness
up to 0.062”.
DGB9FT
DGB9FT
DGB25FT
DGB25FT
DB9 Female Connector for Field Termination
DB25 Female Connector for Field Termination
8.25
12.00
7.76
11.28
7.26
10.56
6.77
9.84
6.27
9.12
DGBH15FT
DGBH15FT
SVGA HD15 Female Connector for Field Termination
10.00
9.40
8.80
8.20
7.60
DGB25FT
DGB25FT
How to perform a field installation of a DGBH15FT HD15 (SVGA) jack
STEP 1
STEP 3
STEP 2
DGBH15FT
DGBH15FT
DGBH15FT PINOUT TABLE
SIGNAL
WIRE
PIN
Prepare bulk cable by exposing coax
and conductor lines as shown.
Insert coax center conductor and shield as well as
conductors into appropriate terminal slot as indicated
in the supplied wiring diagram. Tighten the setscrews.
Attach the completed assembly to the
mounting surface.
Mini DIN 4 - S-Video Jack for Field Termination
The MD44FT field termination Mini DIN 4 female jack offers a quick and easy field termination using common tools. Terminal blocks with set screws
ensure reliable electrical connections. The terminal block area is clearly marked making field termination virtually foolproof. This unit is designed to fit
common .5" circular or D style openings. The undercut PCB area provides a convenient area to secure a cable tie wrap resulting in a neat dressing for
the terminated cable. Custom configurations will be considered with modest minimums.
MD44FT
MD44FT
Mini DIN 4 Female Field Termination Jack
6.75
6.21
5.67
5.13
4.59
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Red
Green
Blue
ID BIT 2
Ground
Red Shield
Green Shield
Blue Shield
DDV +5V
Sync Rtn
ID BIT 0
ID BIT 1
Horiz Sync
Vert Sync
ID BIT 3
Shell
Coax CC
Coax CC
Coax CC
TP 1
TP 1
Coax Shield
Coax Shield
Coax Shield
Cond 1
TP 3/4
TP 2
TP 2
Cond 2
TP 3
TP 4
Drain Wire
Pinout table is included with instruction sheet
for the DGBH15FT
Mini DIN Bulkhead Jack to Flying Leads
Machined adapters utilize 4, 6 or 8 26 AWG color coded wires for chassis termination.
MD44FJF
MD44FJF
MD44FJR
MD44FJR
Mini DIN 4 Bulkhead Jack / Leads, Front Mount
Mini DIN 4 Bulkhead Jack / Leads, Rear Mount
9.35
9.35
8.60
8.60
7.85
7.85
7.11
7.11
6.36
6.36
Installation of Mini DIN bulkhead adapter styles
Side View
MD44FT
DIN-4
Side View
Nut
PIN 1
PIN 2
PIN 3
PIN 4
MD44FT WIRING TABLE
MD44FT
TERMINAL BLOCK
Y SHIELD
C SHIELD
Y CENTER
C CENTER
MD44FJF
Nut
Panel
front
Panel
front
Front Mount
Mount adapter from the front of panel, secure threads/nut from the
back of the panel.
MD44FJR
Rear Mount
Mount adapter from the rear of panel, secure threads/nut from the
front of the panel.
Connector reference chart
A handy listing of popular connectors.
L-com.com/ConnectorChart
Shop at L-com.com or call 1-800-343-1455 • E-mail: [email protected] • Fax: 978-689-9484
2009 Master Catalog 1.0
109