How to send EC-NET AX schedules to the BACnet controllers -controls.com/smartsource/print/702/
Transcription
How to send EC-NET AX schedules to the BACnet controllers -controls.com/smartsource/print/702/
How to send EC-NET AX schedules to the BACnet controllers 1 of 4 http://www.distech-controls.com/smartsource/print/702/ Category: BACnet Products -> ECB Series -> ECB-103 -> Tech Notes Create a schedule in the EC-gfxProgram Create a schedule in EC-NET AX Under the controllers Schedules, go to BACnet Schedule Export Manager Click on discover and you should find the schedule created in the EC-gfxProgram 1/10/2014 8:13 AM How to send EC-NET AX schedules to the BACnet controllers 2 of 4 http://www.distech-controls.com/smartsource/print/702/ Add the schedule to the Database and the the ORD select the EC-NET AX schedule that will control the BACnet Schedule. Once added to the Database go to the schedule's properties sheet and configure the skip Writes 1/10/2014 8:13 AM How to send EC-NET AX schedules to the BACnet controllers 3 of 4 http://www.distech-controls.com/smartsource/print/702/ Make sure PriorityForWriting is set to TRUE If Niagara is checked then the Ec-Net-AX schedule will be the master. If Device is checked then the ECgfx-Program Schedule will be the master. This option is available only once, right after the schedule is in the database and cannot be changed later unless the schedule is deleted from the database. 1/10/2014 8:13 AM How to send EC-NET AX schedules to the BACnet controllers 4 of 4 http://www.distech-controls.com/smartsource/print/702/ Set to False the Cleanup Special Events in Ec-Net-AX and make sure that the Real Time Clock is synchronized in ECgfx-Program. Article ID: 702 Last updated: 29 Nov, 2013 BACnet Products -> ECB Series -> ECB-103 -> Tech Notes -> How to send EC-NET AX schedules to the BACnet controllers http://www.distech-controls.com/smartsource/entry/702/ 1/10/2014 8:13 AM