MSP series progressive divider valve NPT MS

How to select parts to build an MSP
series progressive divider valve
assembly, with NPT threading and
standard MS inlet.
MSP parts are now easier to order
• No longer necessary to order the base
components individually (NPT only)
• Select the correct base assembly, then select
valves and optional components
• Base assembly is delivered assembled
– Just install valves and other options,
– Test,
– Ship!
How many sections are in the assembly?
This includes working sections and bypass blocks
Choose the approriate MSP Base Plate Assembly. Count up
the number of sections, and order a base assembly that has
the correct number of sections.
•
•
•
•
Part #, Description
24G485, MSP–3 Section
24G486, MSP–4 Section
24G487, MSP–5 Section
•
•
•
•
Part #, Description
24G488, MSP–6 Section
24G489, MSP–7 Section
24G490, MSP–8 Section
Completely assembled and tested with inlet, subplate (base plate),
end section, tie rods, and nuts.
Which valve sections do you need?
MSP Working Sections
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
MSP w/Cycle Pin
Available LH or RH
562711 MSP-5S*
Cycle Pin - Left
Cycle Pin - Right
562712 MSP-10S*
• 562734 MSP-20S*
• 562729 MSP-20S*
562713 MSP-15S*
• 562735 MSP-25S*
• 562730 MSP-25S*
562714 MSP-20S*
562715 MSP-25S*
• 562736 MSP-30S*
• 562731 MSP-30S*
562716 MSP-30S*
• 562737 MSP-35S*
• 562732 MSP-35S*
562717 MSP-35S*
• 562738 MSP-40S*
• 562733 MSP-40S*
562718 MSP-40S*
• 562744 MSP-20T
• 562739 MSP-20T
562720 MSP-5T
• 562745 MSP-25T
• 562740 MSP-25T
562721 MSP-10T
• 562746 MSP-30T
• 562741 MSP-30T
562722 MSP-15T
• 562747 MSP-35T
• 562742 MSP-35T
562723 MSP-20T
562724 MSP-25T
• 562748 MSP-40T
• 562743 MSP-40T
562725 MSP-30T
562726 MSP-35T All MSP valve and BP sections must be ordered in multiples of 5
562727 MSP-40T
562660 MSP-BP (By-Pass Section)
*Each “S” section only uses one outlet, but each subplate has two outlets. For each “S” section in the
assembly, order qty 1 of p/n 557349, 1/8” NPT pipe plug ,to plug the unused outlet.
Optional components
Crossports
Cycle Indicators
CR option:
• 563469 Crossport Bar, Right Side
CL option:
• 563470 Crossport Bar, Left Side
CB option:
• 563471 Crossport Bar, Both Sides
(Right and Left)
For each CR or CL bar used, order qty
1 of p/n 557349, 1/8” NPT pipe plug,
to plug the unused outlet. For the CB
option, order 2 plugs.
• p/n 563272, SPDT cycle switch
assembly (switch with bracket)
• Mounted onto the cycle pin to
provide electrical signal when
valve assembly is cycling
• Cycle pin can be used without the
cycle switch to provide visual
indication.
• For visual indication on a
standard valve, order p/n 563251,
Visual Cycle Indicator Assembly
• For proximity switches, see next
page
Proximity switches
See literature L15600 for more information.
Explosion-proof prox switches include 6ft, 3 conductor cable.
All others ship without connecting cable, order cable separately (see next page).
Part No.
Prox. Switch
Type
Operating
Voltage
Cable Electric
Connection
LED
24K415
DC PNP
10-36 VDC
M12
Yes
600?
5100
557741
FSM
115 VAC
3-pin BH Mini
No
200
3,500
150,000,000+
557745
FSM
115 VAC
Explosion
Proof
No
200
3,500
150,000,000+
557746
FSM
115 VAC
5-pin BH Mini
No
200
3,500
150,000,000+
557747
FSM
10-32 VDC
4-pin CH Mini
No
200
3,500
150,000,000+
563477
FSmech
20-32 VDC
5-pin BH Mini
Yes
150
7,500
10,000,000+
563478
FSmech
20-32 VDC
3-pin BH Mini
Yes
150
7,500
10,000,000+
563484
FSmech
5-pin BH Mini
No
150
7,500
10,000,000+
563485
FSmech
No
150
7,500
10,000,000+
563427
Reed
No
60
7,500
10,000,000+
563501
FSmech
Yes
150
7,500
10,000,000+
115 VAC or
10-32 VDC
115 VAC or
10-32 VDC
115 VAC or
10-32 VDC
20-32 VDC
Explosion
Proof
1/2 in NPT
cond
4-pin Micro
Max Cycle Max Pressure
Rate Per Min Rating - psi
Rated Life Cycle
Cables for Prox switches
• Most prox switches ship without a cable, so order the correct
cable for the connector on the prox switch:
• 124333, M12 Cable, Male by Female, 5 m/16 ft (for G3 pump)
• 558021, 3-Pin Cable, Straight Connector - 6 ft
• 558022, 3-Pin Cable, Straight Connector - 12 ft
• 558025, 4-Pin Cable, Straight Connector, Polarity - PNP - 12 ft
• 558026, 4-Pin Cable, 90° Connector, Polarity - PNP - 12 ft
• 558023, 5-Pin Cable, Straight Connector - 6 ft
• 558024, 5-Pin Cable, Straight Connector - 12 ft
Performance (High Pressure) Indicators
Reset Indicator with Memory
Automatic Relief Indicator
Shows you which line is blocked during a lube fault.
Vents to atmosphere when a line is blocked,
allowing other lines to keep working.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
563252
563253
563254
563255
563256
563257
563258
250 psi
500 psi
750 psi
1000 psi
1500 psi
2000 psi
2500 psi
563170
563171
563172
563173
563174
563175
563176
750 psi
1000 psi
1250 psi
1500 psi
2000 psi
2500 psi
3000 psi
Check Valves
Outlet Check Valves:
Bearing Point Check Valves:
•
•
•
1/8 NPT male inlet x 1/8 NPSM female
outlet
See L15825 for more information
Single Ball Check Valves (steel body, steel ball):
• 563195
10 psi cracking pressure,
• 563196
35 psi cracking pressure,
• 563197
125 psi cracking pressure,
• 563198
250 psi cracking pressure
• 563051
360 psi cracking pressure
Soft Seat Check Valve (steel body, Viton ball):
• 563049
35 psi cracking pressure
•
Required for oil systems to keep oil in
lines and controlled
Optional for grease systems
Many options available, see L15825 for
product offerings that match the needs of the
application.
Appendix A: MSP Valve Suffixes
Code
MSP-xxA
MSP-xxB
MSP-xxC
MSP-xxD
MSP-xxE
MSP-xxF
MSP-xxG
MSP-xxH
MSP-xxI
MSP-xxJ
MSP-xxK
MSP-xxL
MSP-xxM
MSP-xxN
MSP-xxO
MSP-xxP
MSP-xxQ
MSP-xxR
MSP-xxS
MSP-xxT
MSP-xxU
MSP-xxV
MSP-xxW
MSP-xxX
MSP-xxY
MSP-xxZ
MSP-BP
Description
By-pass block. "00A" was the old way to specify this. Currently "BP" is used. p/n 562660
Twin valve with cycle pin on Right side.
Single valve with cycle pin on Right side, outlet on Right side.
Single valve with cycle pin on Right side, outlet on Left side.
Twin valve with prox switch. - Use standard "T" valve, plus prox switch specified by customer.
Single valve with prox switch, outlet on Right side. - Use standard "S" valve, plus prox switch specified by customer, plug left outlet on
subplate.
Single valve with prox switch, outlet on Left side. - Use standard "S" valve, plus prox switch specified by customer, but plug right
outlet on subplate.
Twin valve with cycle pin on Left side.
"TCL" or Twin valve with a crossport on the Left side.
Single valve with cycle pin on Left side, outlet on Right side.
Single valve with cycle pin on Left side, outlet on Left side.
Standard Single valve, but with outlet on Left side. - Use standard "S" valve, but plug Right outlet on subplate, leave Left outlet open.
"SCR" or Single valve with a crossport on the Right side.
Twin valve with cycle pin on Right side, plus a crossport on the Right side.
Not used.
Twin valve with cycle pin on Right side, plus a crossport on the Left side.
Twin valve with cycle pin on Right side, plus crossports on Both sides.
Single valve with cycle pin on Right side, plus a crossport on the Right side.
Standard single valve, with outlet on Right side. - Use standard "S" valve, plug left outlet on subplate, leave right outlet open.
Standard twin valve.
Single valve with cycle pin on Right side, plus a crossport on the Left side.
Twin valve with prox switch, plus a crossport on the Right side.
Twin valve with prox switch, plus a crossport on the Left side.
Twin valve with prox switch, plus crossports on Both sides.
Single valve with prox switch, plus a crossport on the Right side.
Single valve with prox switch, plus a crossport on the Left side.
By-pass block. "00A" was the old way to specify this. Currently "BP" is used. p/n 562660
Appendix B: Technical Specifications
Torque Specifications
Tie Rod Nut:
• 5-8 ft lbs (6.8 – 10.8 N-m)
Valve Block Mtg. Screw:
• 8-9 ft lbs (10.8 – 12.2 N-m)*
Indicator Port Plug:
• 8-9 ft lbs (10.8 – 12.2 N-m)*
Inlet Bleed Screw:
• 1-2 ft lbs (1.4 – 2.7 N-m)
Piston Enclosure Plug:
• 12-15 ft lbs (16.3 – 20.3 N-m)*
*O-Ring sealed components
Net Weight lbs (kg)
• 3 section: 5.9 (2.7)
• 4 section: 7.3 (3.3)
• 5 section: 8.7 (4.0)
• 6 section: 10.2 (4.6)
• 7 section: 11.6 (5.6)
• 8 section: 13.0 (5.9)
For more specs see L10102
For other options and specialty
parts, see the ILE Buyers Guide,
or contact Graco.
This guide is intended to keep the
subject matter as simple as possible,
but Graco does offer special inlets,
other thread options, and more
optional components.