MXP series progressive divider valve NPT

How to select parts to build an MXP
series progressive divider valve
assembly, with NPT threading.
A simple MXP assembly consists of
these basic parts:
1. Inlet
2. Intermediate base sections
(also known as Subplates or Baseplates)
3. Valve sections
4. End section
5. Tie Rods
6. Tie Rod Nuts
Other accessories are available as options
How many sections are in the assembly?
This includes working sections and bypass blocks
Count up the number of valve sections and bypass blocks (if
any), and order that number of intermediate base sections.
p/n 563519- MXP Intermediate Base, with NPSF threading
Must be ordered in even quantities (2’s), so if you need 3 for your
assembly, you still order 4 and put the extra one into stock.
Order the correct tie rods according to number of sections:
 3 tie rods, and 3 nuts required per MXP assembly
•
•
•
•
•
557766
557767
557768
557769
557770
3-section tie rod
4-section tie rod
5-section tie rod
6-section tie rod
7-section tie rod
•
•
•
•
557771
557772
563520
555406
8-section tie rod
9-section tie rod
10-section tie rod
Tie rod Nut
Which valve sections do you need?
MXP Working Sections
•
•
•
•
•
•
•
•
•
•
•
•
•
562819 MXP-25S*
562820 MXP-50S*
562821 MXP-75S*
562822 MXP-100S*
562823 MXP-125S*
562824 MXP-150S*
562813 MXP-25T
562814 MXP-50T
562815 MXP-75T
562816 MXP-100T
562817 MXP-125T
562818 MXP-150T
562835 MXP-BP (By-Pass Section)
MXP w/Cycle Pin (RH only)
•
•
•
•
•
•
•
•
•
•
562830 MXP-50S*
562831 MXP-75S*
562832 MXP-100S*
562833 MXP-125S*
562834 MXP-150S*
562825 MXP-50T
562826 MXP-75T
562827 MXP-100T
562828 MXP-125T
562829 MXP-150T
*Each “S” section only uses one outlet, but each
subplate has two outlets. For each “S” section in the
assembly, order qty 1 of p/n 557391, 1/4” NPT pipe
plug ,to plug the unused outlet.
All MXP valve and BP sections must be ordered in multiples of 2
Each assembly needs 1 Inlet and
1 End section
• 15R993, MXP Inlet, NPSF thread
• 563518, MXP End section
Must be ordered in even quantities (2’s), so even
though you need only 1 per assembly, you still
order 2 at a time, and put the extra one into stock.
Optional components
Crossports
Cycle Indicators
CR option:
• 563525 Crossport Bar, Right Side
CL option:
• 563524 Crossport Bar, Left Side
CB option:
• 563526 Crossport Bar, Both Sides
(Right and Left)
For each CR or CL bar used, order qty
1 of p/n 557391, 1/4” NPT pipe plug,
to plug the unused outlet. For the CB
option, order 2 plugs.
• p/n 563272, SPDT cycle switch
assembly (switch with bracket)
• Mounted onto the cycle pin to
provide electrical signal when
valve assembly is cycling
• Cycle pin can be used without the
cycle switch to provide visual
indication.
• For visual indication on a
standard valve, order p/n 563260,
Visual Cycle Indicator Assembly
• For proximity switches, see next
page
Proximity switches
See literature L15600 for more information.
Explosion-proof prox switches include 6ft, 3 conductor cable.
All others ship without connecting cable, order cable separately (see next page).
Part No.
Prox. Switch
Type
Operating
Voltage
Cable Electric
Connection
LED
Max Cycle Max Pressure Rated Life Rate Per Min Rating - psi
Cycle
564399
FSM
115 VAC
5-pin BH Mini
No
200
3,500
150,000,000+
563476
FSM
115 VAC
3-pin BH Mini
No
200
3,500
150,000,000+
563486
FSmech
20-32 VDC
3-pin BH Mini
Yes
150
7,500
10,000,000+
564400
FSmech
20-32 VDC
5-pin BH Mini
Yes
150
7,500
10,000,000+
564401
FSmech
115 VAC or
10-32 VDC
Expl Proof*
No
150
7,500
10,000,000+
557752
FSM
10-32 VDC
4-pin CH Mini
No
200
10,000**
150,000,000+
558938
FSM
115 VAC
5-pin BH Mini
No
200
10,000**
150,000,000+
564403
FSM
10-32 VDC
4-pin Micro
No
200
10,000**
150,000,000+
Cables for Prox switches
• Most prox switches ship without a cable, so order the correct
cable for the connector on the prox switch:
• 124333, M12 Cable, Male by Female, 5 m/16 ft (for G3 pump)
• 558021, 3-Pin Cable, Straight Connector - 6 ft
• 558022, 3-Pin Cable, Straight Connector - 12 ft
• 558025, 4-Pin Cable, Straight Connector, Polarity - PNP - 12 ft
• 558026, 4-Pin Cable, 90° Connector, Polarity - PNP - 12 ft
• 558023, 5-Pin Cable, Straight Connector - 6 ft
• 558024, 5-Pin Cable, Straight Connector - 12 ft
Performance (High Pressure) Indicators
Reset Indicator with Memory
Automatic Relief Indicator
Shows you which line is blocked during a lube fault.
Vents to atmosphere when a line is blocked,
allowing other lines to keep working.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
563252
563253
563254
563255
563256
563257
563258
250 psi
500 psi
750 psi
1000 psi
1500 psi
2000 psi
2500 psi
563170
563171
563172
563173
563174
563175
563176
750 psi
1000 psi
1250 psi
1500 psi
2000 psi
2500 psi
3000 psi
Check Valves
Outlet Check Valves:
Bearing Point Check Valves:
•
•
•
1/4 NPT male inlet x 1/4 NPSM female
outlet
See L15825 for more information
Single Ball Check Valves (steel body, steel
ball):
• 563206 10 psi cracking pressure
• 563207 35 psi cracking pressure
• 563208 100 psi cracking pressure
• 563209 250 psi cracking pressure
•
Required for oil systems to keep oil in
lines and controlled
Optional for grease systems
Many options available, see L15825 for
product offerings that match the needs
of the application.
Appendix A: MXP Valve Suffixes
Code
MXP-xxA
MXP-xxB
MXP-xxC
MXP-xxD
MXP-xxE
MXP-xxF
MXP-xxG
MXP-xxH
MXP-xxI
MXP-xxJ
MXP-xxK
MXP-xxL
MXP-xxM
MXP-xxN
MXP-xxO
MXP-xxP
MXP-xxQ
MXP-xxR
MXP-xxS
MXP-xxT
MXP-xxU
MXP-xxV
MXP-xxW
MXP-xxX
MXP-xxY
MXP-xxZ
MXP-BP
Description
Not used
Twin valve with cycle pin on Right side.
Single valve with cycle pin on Right side, outlet on Right side.
Single valve with cycle pin on Left side, outlet on Left side.
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Standard Single valve, but with outlet on Left side.
Not used
Not used
Not used
Not used
Not used
Not used
Standard single valve, with outlet on Right side.
Standard twin valve.
Not used
Not used
Not used
Not used
Not used
Not used
By-pass block.
Appendix B: Technical Specifications
Torque Specifications
Tie Rod Nut:
• 6-9 ft lbs (8.1 – 12.2 N-m)
Valve Block Mtg. Screw:
• 12-13 ft lbs (16.3 – 17.6 N-m)
Indicator Port Plug:
• 12-15 ft lbs (16.3 – 20.3 N-m)
Piston Enclosure Plug:
• 46-50 ft lbs (62.3 – 67.8 N-m)
For more specs see L10132
Net Weight lbs (kg)
• 3 section: 18.2 (8.3)
• 4 section: 22.6 (10.2)
• 5 section: 26.9 (12.2)
• 6 section: 31.3 (14.2)
• 7 section: 35.6 (16.2)
• 8 section: 39.9 (18.1)
• 9 section: 44.3 (20.1)
• 10 section: 48.6 (22.1)
For other options and specialty
parts, see the ILE Buyers Guide,
or contact Graco.
This guide is intended to keep the
subject matter as simple as possible,
but Graco does offer other thread
options, and more optional
components.