OE556 - How to Achieve Production Target Oil and Gas Engineering TÜV

Oil and Gas Engineering
OE556 - How to Achieve Production Target
(15 - 19 June, 2014, Dubai)
TÜV®
Akademie
OE556 - How to Achieve Production Target
(15 -19 June 2014, Dubai)
Course Description
Generally this course is specific for process engineers
which are involved in the production processing facilities .
Course Objectives
At the end of this course the attendee supposed to be
able to:
n Investigate the production technologies/problems and
how to be familiar with the gas processing trouble
shooting.
n Understanding the recovery reclamation process
n Analyzing production reports
n Advanced quality control check
n Operate according to your company/international
n Oil companies (IOCs) standards and procedures to
achieve a production target.
n Prepare all related job documentations; job procedures,
risk assessment and HAZOP report for new modifications.
Who Should Attend?
This course if for Junior Operator/Operator II.
Course Outline
n Gas and oil production
n Physical properties of Natural gas: Terminology, Pressure, Partial Pressure, Dalton’s Law of Partial Pressures, Temperature, Temperature Scale, Molecular
Weight, Ideal Gas Law & Gas Density.
n Phase Behavior of natural gas: One component system (Pure Component), Tow component system, Multi
Component System & Phase Equilibrium calculations.
Production reports.
n Gas Dehydration & Hydrate Prevention Methods:
Gas hydrates & Hydrate formation conditions, Hydrate
prevention by Chemical, Methanol/Glycol comparison,
Glycol type selection, Glycol Dehydration Process,
Glycol reclamation process, solid desiccant Dehydration methods, Desiccant choice, Dehydration steps,
Adsorption, Process description.
n Discuss logic in operating procedures and sequence
of steps.
n Diagnose gas plant operation problems.
n Describe procedures of trouble shooting.
n Recognize key points usually included in production
operation reports
OE556 - How to Achieve Production Target
(15 -19 June 2014, Dubai)
Terms & Conditions
About the Instructor
n TÜV Middle East Certificate will be issued to all attendees.
n Course Fee mentioned is per delegate.
n Avail an attractive 10% discount on course fee if you
register 30 days before course start date.
n Courses will be conducted during the designated
dates at a 4 star or 5 star hotel in the designated city.
n Payments to be made in advance. Exact venue of the
training will be notified two weeks prior to course start
date.
n This rate includes course notes, buffet lunch, coffee/
tea on arrival, morning and afternoon of each day.
n Accomodation is not included in course fees. However, any accomodation required can be arranged by
TÜV Middle East at time of booking.
Eng. Ahmed Shoman has more than 10 years experience with
BP- EGPC Joint Venture “GUPCO” in Ras Shukier Gas Plant.
He is specialized in the gas processing plant including separation systems, gas conditioning units both Dehydration and
sweetening, storage & terminal facilities and potable water
production plants including the Reheat Desalination Units (RH
Units) and the Reverse Osmosis Desalination unit (RO Unit)
safely and efficiently operated through a safe manner applying
BP-GUPCO Safety Golden Rules. He is also concerned with all
materials used in gas plant. Eng. Ahmed is an instructor for Natural Gas Processing courses for EBGDCO NGL plant delivering
several courses in Gas Processing, Gas Sweetening, Petroleum
Refinery and many other.
Roles and Responsibilities are:
n Provide consultative support to ensure the gas processing
For further details and up to date terms and conditions,
visit www.tuvakademie.net\tac1.pdf
Duration
5 days - 08:00am until 03:30pm daily
n
Location & Date
Dubai, 15 - 19 June 2014
n
Participation Fee
US$ 3,875/- per participant
Your Contact
n
n
Ms. Omolola
Tel: +971 2 4411148
Email:[email protected]
n
plant including separation systems, compression by gas
compressors which driven by gas turbines, gas conditioning
units both Dehydration and sweetening, storage & terminal
facilities and potable water production plants including the
Reheat Desalination Units (RH Units) and the Reverse Osmosis Desalination unit (RO Unit) safely and efficiently operated through a safe manner applying BP-GUPCO Safety
Golden Rules.
Manages and provides on site technical support (process
simulation, using HYSIS, plant trouble shooting, carrying out
preliminary feasibility studies, cost & benefits estimations …
etc).
Make a daily periodic check for all the conditions which in our
natural gas plant (pressures, temperatures, feed flow rates
of the gas ), and the production of Sales gas, LPG, Naphtha
& Potable Water from RH Units ( its amounts and its specifications).
Familiar to deal with all references, manuals, PFDs & PIDs.
All materials used in our gas plant (chemicals, filters, solid
descents also make a daily, monthly & annual reports include
all the former points Familiar to DSC operating control devices”800 XA industrial IT”, plant control philosophy, and its software configurations particularly the Adva Build & Operate IT.
Can deal with all storage & loading terminal facilities (spherical & cylindrical tanks [floating & fixed roof]) (Tankers Shipping through Berths, Trucks through Loading Arms & Pumping through Pipelines).
Instructor for Natural Gas Processing courses at NCB “national consultant Bureau”.
Registration
Please visit www.tuvakademie.net for details on courses we offer and more updated information. You can also
register online.
For applications by mail / fax, please fill the form below and send to address below :
TÜV Middle East
P. O. Box 46030
Abu Dhabi, United Arab Emirates
Fax Number : +971 2 4411149
OE556 - How to Achieve Production Target
Date
Location
Yes, register me for the training.
Company Information
Company Name
Address Line 1
Address Line 2
City
Country
Telephone
Fax
Industry
Number of employees
Participant Information
Name
Job Title
Email
I agree that TÜV Middle East can send me periodic emails about news and latest course offerings to my email.
I / we acknowledge to the terms and conditions of the organizer
Location & Date
Signature
TÜV Middle East
P. O. Box 46030
Abu Dhabi, United Arab Emirates
Tel : +971 2 4411148
Fax : +971 2 4411149
[email protected]
www.tuvakademie.net | www.tuv-nord.com
TÜV Middle East • All rights reserved
Akademie