How How to to to install

How to install Multi Di@g Access J2534 Device Software?
Multi-Diag Access J2534 Pass-Thru is compatible with Passthru+ XS also known as Multi-Di@g
Access by Actia.2010I Actia Multidiag J2534 is compatible with AUTODATA CD.Multi-Diag Access
J2534 Pass-Thru is the V2010I Version
Software version: 2010I
Multi-Di@g Access J2534 interface setup instruction vedio:
http://www.youtube.com/watch?v=XQp0nrNcLVw
Attention: Multi-Diag Access J2534 Pass-Thru OBD2 Device is not good at programming function. And
it is not good at Japan cars.
Multi Di@g Access J2534 installtion user notes:
When install the software of
Multi-Di@g Access J2534 Pass-Thru OBD2 Device, after the Multi-Di@g
J2534 softare configuration window appears,
you should choose: Multi-Di@g Access Communication
interface to USB and setting Multi-Di@g VC I serial number to: A070026.
Then, Multi-Diag installtion interface will shows activation code:
Press green button on Multi-Diag J2534 software menu. and you will see Multi-Diag software ask for
activate code.
please send the activate to us,
we wills send the correct Multi-Diag J2534 activation
code to you, or you can find the free keygen for Multi-Diag J2534 from ADKautoscan.com
When the Multi-Diag J2534 Device connected with your PC, warning about 0 d ay left,
not display this message agian". and continue the work,
completely,
just choose "do
Multi-Diag J2534 software will be activated