SP-1m Sample Changer Anton Paar • Robust and durable design

Comments

Transcription

SP-1m Sample Changer Anton Paar • Robust and durable design
SP-1m Sample Changer
• Robust and durable design
• 3 sample filling modes
• Up to 60 samples per tray
Anton Paar
SP-1m Sample Changer
Technical Specifications
A single key stroke, and the SP-1m automatically fills samples from the
sample tray into the measuring cell of a DMA 4500/5000. Previous
Measuring Time per Sample 2 to 5 minutes, including sample
sample is displaced by the new sample, no cleaning between the
filling, measurement and sample
displacement
samples is required.
Sample Loading Modes
• Plain displacement
• Displacement by generating
bubbles in initial pump phase
• Displacement by
pumping back and forth in
initial pump phase
Max. Sample Viscosity
Up to 100 mPa.s at ambient
temperature
Samples per Tray
24 (35 ml)
Optional: 30 (12 ml), 60 (12 ml)
Dimensions (L x W x H)
580 x 385 x 380 mm,
22.8 x 15.2 x 15.0 inches
Weight
Approx. 20 kg, approx. 44 lbs
Power Supply
110/220 VAC ±10 %, 50 VA
Features
Comfortable and Simple Operation
• Measurement of 24 (optional 60) samples in one cycle
• Operating parameters are keyed in through the DMA 4500/DMA 5000
keyboard
• For 10 different methods operating parameters can be stored
• Automatic transfer of measuring results to a printer or PC
Automatic Sample Identification
• Sample position detected by sensor at the tray
• Sample identification by number or by alphanumeric ID through link with
pre-configured list
• Entry of pre-configured list by keyboard or bar code reader
Rugged Design
• All wetted parts made of stainless steel, silicone or Viton
• Robust metal housing
Applications
Specifications subject to change without notice.
Anton Paar
• Soft drinks and syrups
• Aqueous, non-corrosive
samples with low viscosity
10/98
®
Anton Paar GmbH
Kärntner Strasse 322
8054 Graz, Austria/Europe
Phone: +43 316 257-0
E-mail: [email protected]
Fax: +43 316 257-257
Internet: http://www.anton-paar.com
Instruments for:
• density/concentration
• rheology/colloid science
• sample decomposition
• X-ray structure analysis
• CO2 measurement
• microhardness testing
• temperature
• medicine/biology
A94IP01A

Similar documents