Document 6546022

CSIRO Verification Services
Highett, Victoria, Australia
+61 (0)3 9252 6000
http://www.activfire.gov.au/
Certificate of Conformity
Certificate num.
afp - 2889
Registration date
14-Jan-2014
Version
Valid until
Number
Issue date
1
14-Jan-2014
Product designation
Simplex, 4099 Series, addressable manual call points
(Refer to the Schedule/enclosures for further specified details)
Agent/distributor
Tyco Fire Protection Products
Level 3, 95 Coventry Street, SOUTHBANK, VIC, AUSTRALIA, 3006
Registrant
Tyco Fire Protection Products
17 Mary Muller Drive, HILLSBOROUGH, CHRISTCHURCH, NEW ZEALAND, 8022
Producer
KAC Alarm Company Limited
KAC House, Thornhill Road, North Moons Moat, REDDITCH, WORCESTERSHIRE, UNITED
KINGDOM, B98 9ND
Conformance criteria and evaluation
The Simplex, 4099 Series, addressable manual call points has been evaluated and verified
as conforming with the relevant requirements of the following criteria.
1. Australian Standard AS 1603.5-1996, 'Automatic fire detection and alarm systems Manual call points (all requirements other than weathering)' incl. Amdt 1 (August
1998).
Limitations/conditions of conformance
Limitations/conditions of conformance, where identified on this certificate, are derived from qualifications
from evaluation(s) for conformity and/or other related technical documentation. All details with respect to
design, assembly and installation instructions and restrictions should be checked against the producer's
current technical manual/data sheets and the requirements of the Authority having Jurisdiction.
i.
ii.
Compatibility of this device with new or existing control and indicating equipment
should be verified prior to installation.
This device has been validated by evaluation when connected to the Simplex 4010ES
fire indicator panel (test platform variant of the Simplex 4100ES fire indicator panel).
Issued by
Page 1 of 2
30-Apr-2015
This certification is issued within
the scope of CSIRO Verification
Services – Rules governing
ActivFire Scheme and is valid only
for the product(s) as submitted for
evaluation and verification of
conformity, subject to the following
conditions.
• Reference to details, limitations
and requirements, where
documented as a
schedule/enclosure with this
certificate.
• The Registrant is responsible
for their attestation of
conformity and ensuring that
on-going production complies
with the conformance criteria
defined in this certificate.
• This certificate will not be valid
if any changes or modifications
are made to the product which
have not been notified and
validated by CSIRO Verification
Services.
• This certificate is subject to
periodical re-validation upon
verification that all
requirements, as determined
by the conformity assessment
body, continue to be
satisfactorily met by the
Registrant.
• This certificate may only be
reproduced in its published
form, without modification and
inclusive of all
schedules/enclosures.
• Any changes, errors or
omissions, must be submitted
in writing and if necessary or
requested, substantiated with
relevant evidence.
• Any representations, such as
advertising or other marketing
related activities or articles
shall reflect the correct
contents of this certificate and
conform with all relevant trade
practices .and consumer
protection legislation and
regulations.
• Any terms or conditions of use
as applicable to content and
documentation as published or
accessed through web sites
administered by the CSIRO
Verification Services.
David Whittaker
Executive Officer – ActivFire Scheme
© CSIRO Australia, 2014
This certificate remains the property of CSIRO and may be subject to amendment, suspension or withdrawal at any time.
The validity and authenticity of this certificate can be verified by the certification register located at http://www.activfire.gov.au
Schedule to
Certificate of Conformity
Certificate num.
Registration date
afp - 2889
Version
14-Jan-2014
Valid until
Number
Issue date
1
14-Jan-2014
Page 2 of 2
30-Apr-2015
Producer's description
The Simplex, 4099 Series, addressable manual call points, with compact communications module, are easily
installed to satisfy demanding applications. An integral individual addressable module (IAM) monitors status and
communicates changes to the connected control panel via IDNet communications.
Technical specification
The following details are a representative extract of the technical specification for the Simplex, 4099 Series, addressable manual call
points and may be subject to change. Complete and current details should be determined from the designated producer’s technical
manual/data sheets.
Model
Model feature
Model 4099-9701
Model 4099-9702
LED status indicator
Power and communications
Address means
Device type
Wire connections
Storage and operating temperature range
Humidity range
Ingress protection
Color
Material
Dimensions
Circuit type
Addressable, IDNet™
IDNet, 1 address per callpoint
DIPswitch, 8 position
KACPUL
Spade terminals
-10° to 55° C (14° to 131°F)
Up to 95% RH non-condensing
IP24D
Red, RAL3001
PC/ABS
93 mm H x 89 mm W x 28 mm D
(3-5/8” x 3-1/2” x 1-1/16”)
Supplementary information
Schedule of relevant articles
The following schedule is an extract of articles significant and/or related as evidence of conformity.
Reference
Ident. type
Report
Number.
Datasheet
Ident.
XF2708/R1
A0001-0006-3
Title / description
Evaluation for Conformity of the Simplex Models 40999701 and 4099-9702 Manual Call Points to the
requirements of AS 1603.5-1996
Simplex
IDNet™ I/O Devices
IDNet Communicating Devices,
Internal Addressable Manual Callpoint
Date issued
(or date validated)
18-Dec-2013
Mar-2009
Source
CSIRO, Materials Science
and Engineering, Fire
Systems, AU
Tyco Safety Products,
MA, US