Package ‘afex’ October 12, 2014

Transcription

Package ‘afex’
October 12, 2014
Type Package
Title Analysis of Factorial Experiments
Depends R (>= 3.0.0), car, lme4 (>= 1.0.5), reshape2
Suggests ascii, xtable, parallel, plyr, optimx, nloptr
Imports stringr, coin, Matrix, pbkrtest (>= 0.3-6)
Description Provides convenience functions for analyzing factorial experiments
using ANOVA or mixed models. ez.glm(), aov.car(), or aov4() allow
convenient specification of between, within (i.e., repeated-measures), or
mixed between-within (i.e., split-plot) ANOVAs for data in long format
(i.e., one observation per row) aggregating more then one observation per
individual and cell of the design. mixed() fits a mixed model using
lme4::lmer() and computes p-values for all effects in the model using
either Kenward-Roger approximation of degrees of freedom (LMM only),parametric bootstrap (LMMs and GLMMs) or likelihood ratio tests (LMMs and
GLMMs). afex uses type 3 sums of squares as default (imitating commercial
statistical software). compare.2.vectors() compares two vectors using a
variety of tests (t, wilcoxon, and permutation).
URL http://www.psychologie.uni-freiburg.de/Members/singmann/R/afex
License GPL (>= 3)
Encoding latin1
Version 0.11-131
Date 2014-10-11
Author Henrik Singmann [aut, cre],Ben Bolker [aut],Søren Højsgaard [ctb],John Fox [ctb],Michael A. Lawrence [ctb],Ulf Mertens [ctb]
Maintainer Henrik Singmann <[email protected]>
Repository CRAN
Repository/R-Forge/Project afe
1
2
afex-package
Repository/R-Forge/Revision 131
Repository/R-Forge/DateTimeStamp 2014-10-11 17:56:39
Date/Publication 2014-10-12 01:56:53
NeedsCompilation no
R topics documented:
afex-package . .
allFit . . . . . . .
aov.car . . . . . .
compare.2.vectors
md_12.1 . . . . .
md_15.1 . . . . .
md_16.1 . . . . .
md_16.4 . . . . .
mixed . . . . . .
nice.anova . . . .
obk.long . . . . .
round_ps . . . .
set_sum_contrasts
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Index
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2
3
4
10
12
13
15
16
17
24
26
27
28
30
afex-package
The afex Package
Description
Analysis of Factorial Experiments.
Details
Package:
Type:
Version:
Date:
Depends:
Encoding:
License:
URL:
afex
Package
0.11-131
2014-10-11
R (>= 3.0.0), car, lme4 (>= 1.0.5), reshape2
latin1
GPL (>=3)
http://www.psychologie.uni-freiburg.de/Members/singmann/R/afex
Provides convenience functions for analyzing factorial experiments using ANOVA or mixed models. ez.glm(), aov.car(), or aov4() allow convenient specification of between, within (i.e., repeated-
allFit
3
measures), or mixed between-within (i.e., split-plot) ANOVAs for data in long format (i.e., one
observation per row) aggregating more then one observation per individual and cell of the design.
mixed() fits a mixed model using lme4::lmer() and computes p-values for all effects in the model
using either Kenward-Roger approximation of degrees of freedom (LMM only), parametric bootstrap (LMMs and GLMMs) or likelihood ratio tests (LMMs and GLMMs). afex uses type 3 sums
of squares as default (imitating commercial statistical software). compare.2.vectors() compares two
vectors using a variety of tests (t, wilcoxon, and permutation).
Author(s)
Henrik Singmann, Ben Bolker, with contributions from Søren Højsgaard, John Fox, Michael A.
Lawrence, Ulf Mertens
allFit
Refit lmer model using multiple optimizers
Description
Attempt to re-fit a [g]lmer model with a range of optimizers. The default is to use all known optimizers for R that satisfy the requirements (do not require explicit gradients, allow box constraints),
in three categories; (i) built-in (minqa::bobyqa, lme4::Nelder_Mead), (ii) wrapped via optimx
(most of optimx’s optimizers that allow box constraints require an explicit gradient function to be
specified; the two provided here are really base R functions that can be accessed via optimx, (iii)
wrapped via nloptr.
Usage
allFit(m, meth.tab = cbind(optimizer = rep(c("bobyqa", "Nelder_Mead",
"optimx", "nloptwrap"), c(1, 1, 2, 2)), method = c("", "", "nlminb",
"L-BFGS-B", "NLOPT_LN_NELDERMEAD", "NLOPT_LN_BOBYQA")), verbose = TRUE,
maxfun = 1e+05, ...)
Arguments
m
a fitted model with lmer
meth.tab
a matrix (or data.frame) with columns - method the name of a specific optimization method to pass to the optimizer (leave blank for built-in optimizers) optimizer the optimizer function to use
verbose
print progress messages?
maxfun
number of iterations to allow for the optimization rountine.
...
further arguments passed to update.merMod such as data.
Details
Needs packages nloptr and optimx to try out all optimizers. optimx needs to be loaded explicitly
using library or require.
4
aov.car
Value
a list of fitted merMod objects
Author(s)
Ben Bolker
See Also
slice, slice2D in the bbmle package
Examples
## Not run:
require(optimx)
gm1 <- glmer(cbind(incidence, size - incidence) ~ period + (1 | herd),
data = cbpp, family = binomial)
gm_all <- allFit(gm1)
t(sapply(gm_all,fixef)) ## extract fixed effects
sapply(gm_all,logLik) ## log-likelihoods
sapply(gm_all,getME,"theta") ## theta parameters
!sapply(gm_all,inherits,"try-error") ## was fit OK?
## End(Not run)
aov.car
Convenience wrappers for car::Anova using either a formula or factor
based interface.
Description
These functions allow convenient access to Anova (from the car package) for data in the long format
(i.e., one observation per row), possibly aggregating the data if there is more than one obersvation
per individuum and cell. Hence, mixed between-within ANOVAs can be calculated conveniently
without using the rather unhandy format of car::Anova. aov.car can be called using a formula
similar to aov specifying an error strata for the within-subject factor(s), aov4 can be called with a
lme4-like formula, and ez.glm is called specifying the factors as character vectors.
Usage
aov.car(formula, data, fun.aggregate = NULL, type = 3,
factorize = TRUE, check.contrasts = TRUE,
return = "nice", observed = NULL, args.return = list(), ...)
aov4(formula, data, observed = NULL, fun.aggregate = NULL, type = 3,
return = "nice", args.return = list(), ...,
print.formula = FALSE)
aov.car
5
ez.glm(id, dv, data, between = NULL, within = NULL, covariate = NULL,
observed = NULL, fun.aggregate = NULL, type = 3,
return = "nice", args.return = list(), ..., print.formula = FALSE)
univ(object)
Arguments
formula
A formula specifying the ANOVA model similar to aov (for aov.car or similar
to lme4:lmer for aov4). Should include an error term (i.e., Error(id/ ) or
(...|id)). Note that the within-subject factors do not need to be outside the
Error term (this contrasts with aov). See Details.
data
A data.frame containing the data. Mandatory.
fun.aggregate
The function for aggregating the data before running the ANOVA if there is
more than one obervation per individuum and cell of the design. The default
NULL issues a warning if aggregation is necessary and uses mean.
type
The type of sums of squares for the ANOVA. Defaults to 3. Passed to Anova.
Possible values are "II", "III", 2, or 3.
factorize
logical. Should between subject factors be factorized (with note) before running
the analysis. Default is TRUE. If one wants to run an ANCOVA, needs to be set
to FALSE (in which case centering on 0 is checked on numeric variables).
check.contrasts
logical. Should contrasts for between-subject factors be checked and (if necessary) changed to be "contr.sum". See details.
return
What should be returned? If "nice" (the default) will return a nice ANOVA table (produced by nice.anova. Possible values are c("Anova", "lm", "data", "nice", "full", "all
(possibly abbreviated).
observed
character vector indicating which of the variables are observed (i.e, measured)
as compared to experimentally manipulated. The default behavior is to return a
ANOVA table with generalized eta squared effect size for which this information
is necessary (see nice.anova).
args.return
list of further arguments passed to the function which produces the return
value. Currently only supports return = "nice" (the default) which then
passes arguments to nice.anova (see examples).
...
Further arguments passed to fun.aggregate.
id
character vector (of length 1) indicating the subject identifier column in data.
dv
character vector (of length 1) indicating the column containing the dependent
variable in data.
between
character vector indicating the between-subject(s) factor(s)/column(s) in data.
Default is NULL indicating no between-subjects factors.
within
character vector indicating the within-subject(s) factor(s)/column(s) in data.
Default is NULL indicating no within-subjects factors.
6
aov.car
covariate
character vector indicating the between-subject(s) covariate(s) (i.e., column(s))
in data. Default is NULL indicating no covariates.
print.formula
ez.glm is a wrapper for aov.car. This boolean argument indicates whether the
formula in the call to car.aov should be printed.
object
An object of class Anova.mlm as returned by aov.car, ez.glm, or Anova.
Details
Type 3 sums of squares are default in afex. Note that type 3 sums of squares are said to be
dangerous and/or problematic. On the other side they are the default in in SPSS and SAS and
recommended by e.g. Maxwell and Delaney (2004). For a brief discussion see here.
However, note that lower order effects (e.g., main effects) in type 3 ANOVAs are only meaningful
with effects coding. That is, contrasts should be set to contr.sum via options(contrasts=c('contr.sum','contr.poly')
This should be done automatically when loading afex and afex will issue a warning when running
type 3 SS and other coding schemes. You can check the coding with options("contrasts").
The formulas for aov.car or aov4 must contain a single Error term specyfying the ID column and
potential within-subject factors (you can use mixed with multiple error terms). Factors outside the
Error term are treated as between-subject factors (the within-subject factors specified in the Error
term are ignored outside the Error term, i.e., it is not necessary to specify them outside the Error
term, see Examples).
Suppressing the intercept (i.e, via 0 + or - 1) is ignored. Specific specifications of effects (e.g.,
excluding terms with - or using ^) could be okay but is not tested. Using the I or poly function
within the formula is not tested and not supported!
For ez.glm either between or within must not be NULL.
ez.glm will concatante all between-subject factors using * (i.e., producing all main effects and
interactions) and all covariates by + (i.e., adding only the main effects to the existing betweensubject factors). The within-subject factors do fully interact with all between-subject factors and
covariates. This is essentially identical to the behavior of SPSS’s glm function.
To run an ANCOVA you need to set factorize = FALSE and make sure that all variables have the
correct type (i.e., factors are factors and numeric variables are numeric and centered).
Note that the default behavior is to return a nice.anova data.frame. This includes calculation
of generalized eta squared for which all non manipluated (i.e., observed) variables need to be
specified via the observed argument. Changing the effect size to "pes" (partial eta-squared) via
args.return or the return value via return removes this necessity.
If check.contrasts = TRUE, contrasts will be set to "contr.sum" for all between-subject factors if
default contrasts are not equal to "contr.sum" or attrib(factor, "contrasts") != "contr.sum".
(within-subject factors are hard-coded "contr.sum".)
Value
aov.car, aov4, and ez.glm are wrappers to Anova, the return value is dependent on the return argument. When argument return is "nice" (the default) a nice ANOVA table is returnd (nice.anova)
with the following columns: Effect, df, MSE (mean-squared errors), F (potentially with significant
symbols), ges (generalized eta-squared), p.
If return = "full" or return = "all" a list list with the following elements:
aov.car
7
"Anova" the same as Anova. Usually an object of class "Anova.mlm" (with within-subjects factors) or of class c("anova", "data.frame"). Also returned if return = "Anova".
"lm" the object fitted with lm and passed to Anova (i.e., an object of class "lm" or "mlm"). Also
returned if return = "lm".
"data" the data used to fit the lm object. Also returned if return = "data".
"idata" if within-subject factors are present, the idata argument passed to Anova.
"marginal" a list containing the marginal means (the same as when return = "marginal").
If return = "univariate" the object returned from univ.
univ returns a list of data.frames containing the univariate results (i.e., the classical ANOVA results) from an object of class "Anova.mlm". This is essentially the output from summary.Anova.mlm
with multivariate = FALSE, e.g. summary(aov.car(...), multivriate = FALSE), as a list
instead of printed to the console.
For objects of class "anova" (i.e., the object returned by car::Anova for a purely between-subjects
ANOVA) the object is returned unaltered.
The elements of the list returned by univ are: anova, mauchly, and spehricity.correction
(containing both, Greenhouse-Geisser and Hyundt-Feldt correction).
If return = "marginal" A list with data.frames containing the marginal means for all effects.
Numerical variables are ignored.
If return = "aov", an object returned from aov with the (possibly aggregated) data fitted with
aov using "contr.sum" for all factors as long as check.contrasts = TRUE. This object can be
passed to lsmeans::lsmeans for post-hoc tests or lsmeans::lsmip for plotting. Note that aov is
not reliably working for unbalanced data.
Note
Variables entered as within-subjects (i.e., repeated measures) factors are silently converted to factors
and unused levels dropped.
Contrasts attached to a factor as an attribute are probably not preserved and not supported.
The workhorse is aov.car. aov4 and ez.glm only construe and pass an appropriate formula to
aov.car. Use print.formula = TRUE to view this formula.
Author(s)
univ is basically a copy of summary.Anova.mlm written by John Fox.
The other functions were written by Henrik Singmann.
The design of these functions is heavily influenced by ezANOVA from package ez.
References
Maxwell, S. E., & Delaney, H. D. (2004). Designing Experiments and Analyzing Data: A ModelComparisons Perspective. Mahwah, N.J.: Lawrence Erlbaum Associates.
8
aov.car
See Also
nice.anova creats the nice ANOVA tables which are by default returned. See also there for a
slightly longer discussion of effect sizes.
mixed provides a (formula) interface for obtaining p-values for mixed-models via lme4.
obk.long describes the long version of the OBrienKaiser dataset used in the examples.
Examples
# Examples from a pureyl within-design from
# Maxwell & Delaney (2004, Chapter 11),
# Table 12.5 (p. 578):
data(md_12.1)
ez.glm("id", "rt", md_12.1, within = c("angle", "noise"),
args.return=list(correction = "none", es = "none"))
# Default output
ez.glm("id", "rt", md_12.1, within = c("angle", "noise"))
# examples using obk.long (see ?obk.long), a long version of the OBrienKaiser dataset from car.
data(obk.long, package = "afex")
# run univariate mixed ANOVA for the full design:
aov.car(value ~ treatment * gender + Error(id/phase*hour),
data = obk.long, observed = "gender")
aov4(value ~ treatment * gender + (phase*hour|id),
data = obk.long, observed = "gender")
ez.glm("id", "value", obk.long, between = c("treatment", "gender"),
within = c("phase", "hour"), observed = "gender")
# both calls return the same:
##
Effect
## 1
treatment
## 2
gender
## 3
treatment:gender
## 4
phase
## 5
treatment:phase
## 6
gender:phase
## 7
treatment:gender:phase
## 8
hour
## 9
treatment:hour
## 10
gender:hour
## 11
treatment:gender:hour
## 12
phase:hour
## 13
treatment:phase:hour
## 14
gender:phase:hour
## 15 treatment:gender:phase:hour
1.60,
3.20,
1.60,
3.20,
1.84,
3.68,
1.84,
3.68,
3.60,
7.19,
3.60,
7.19,
df
2, 10
1, 10
2, 10
15.99
15.99
15.99
15.99
18.41
18.41
18.41
18.41
35.96
35.96
35.96
35.96
MSE
F ges
p
22.81
3.94 + .20
.05
22.81
3.66 + .11
.08
22.81
2.86 .18
.10
5.02 16.13 *** .15 .0003
5.02
4.85 * .10
.01
5.02
0.28 .003
.71
5.02
0.64 .01
.61
3.39 16.69 *** .13 <.0001
3.39
0.09 .002
.98
3.39
0.45 .004
.63
3.39
0.62 .01
.64
2.67
1.18 .02
.33
2.67
0.35 .009
.93
2.67
0.93 .01
.45
2.67
0.74 .02
.65
aov.car
9
# replicating ?Anova using aov.car:
data = obk.long, type = 2, return = "Anova")
# in contrast to aov you do not need the within-subject factors outside Error()
# replicating ?Anova using ez.glm:
ez.glm("id", "value", obk.long, c("treatment", "gender"),
c("phase", "hour"), type = 2, return = "Anova")
#both return:
## Type II Repeated Measures MANOVA Tests: Pillai test statistic
##
Df test stat approx F num Df den Df
Pr(>F)
## (Intercept)
1
0.970
318
1
10 0.0000000065 ***
## treatment
2
0.481
5
2
10
0.03769 *
## gender
1
0.204
3
1
10
0.14097
## treatment:gender
2
0.364
3
2
10
0.10447
## phase
1
0.851
26
2
9
0.00019 ***
## treatment:phase
2
0.685
3
4
20
0.06674 .
## gender:phase
1
0.043
0
2
9
0.82000
## treatment:gender:phase
2
0.311
1
4
20
0.47215
## hour
1
0.935
25
4
7
0.00030 ***
## treatment:hour
2
0.301
0
8
16
0.92952
## gender:hour
1
0.293
1
4
7
0.60237
## treatment:gender:hour
2
0.570
1
8
16
0.61319
## phase:hour
1
0.550
0
8
3
0.83245
## treatment:phase:hour
2
0.664
0
16
8
0.99144
## gender:phase:hour
1
0.695
1
8
3
0.62021
## treatment:gender:phase:hour 2
0.793
0
16
8
0.97237
## --## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
# ANCOVA: adding a covariate (necessary to set factorize = FALSE)
aov.car(value ~ treatment * gender + age + Error(id/phase*hour),
data = obk.long, observed = c("gender", "age"), factorize = FALSE)
aov4(value ~ treatment * gender + age + (phase*hour|id),
data = obk.long, observed = c("gender", "age"), factorize = FALSE)
ez.glm("id", "value", obk.long, between = c("treatment", "gender"),
within = c("phase", "hour"), covariate = "age",
observed = c("gender", "age"), factorize = FALSE)
# aggregating over one within-subjects factor (phase) with warning:
aov.car(value ~ treatment * gender + Error(id/hour), data = obk.long, observed = "gender")
ez.glm("id", "value", obk.long, c("treatment", "gender"), "hour", observed = "gender")
# runs with "numeric" factors
obk.long$hour2 <- as.numeric(as.character(obk.long$hour))
10
compare.2.vectors
aov.car(value ~ treatment * gender + Error(id/hour2),
data = obk.long, type = 2,observed = c("gender"))
# only between
aov.car(value ~ treatment * gender + Error(id),
data = obk.long, observed = c("gender"))
aov4(value ~ treatment * gender + (1|id),
data = obk.long, observed = c("gender"))
ez.glm("id", "value", obk.long, c("treatment", "gender"),
within = NULL, print.formula = TRUE, observed = "gender")
# only within
aov.car(value ~ Error(id/phase*hour), data = obk.long, type = 2)
aov4(value ~ (phase*hour|id), data = obk.long, type = 2,
print.formula = TRUE)
ez.glm("id", "value", obk.long, NULL, c("phase", "hour"),
type = 2, print.formula = TRUE)
# using return = "full":
str(aov.car(value ~ Error(id/phase*hour), data = obk.long, return = "full"), 1)
## List of 4
## $ Anova:List of 14
##
..- attr(*, "class")=
## $ lm
:List of 11
##
..- attr(*, "class")=
## $ data :'data.frame':
## $ idata:'data.frame':
## $ marginal:List of 3
chr "Anova.mlm"
chr [1:2] "mlm" "lm"
16 obs. of 16 variables:
# use args.return arguments:
data = obk.long, args.return = list(correction = "none", es = "pes"))
data = obk.long,observed = "gender",
args.return = list(correction = "none", MSE = FALSE))
compare.2.vectors
Compare two vectors using various tests.
Description
Compares two vectors x and y using t-test, Welch-test (also known as Satterthwaite), Wilcoxon-test,
and a permutation test implemented in coin.
compare.2.vectors
11
Usage
compare.2.vectors(x, y, paired = FALSE, na.rm = FALSE,
tests = c("parametric", "nonparametric"), coin = TRUE,
alternative = "two.sided",
perm.distribution = approximate(100000),
wilcox.exact = NULL, wilcox.correct = TRUE)
Arguments
x
a (non-empty) numeric vector of data values.
y
a (non-empty) numeric vector of data values.
paired
a logical whether the data is paired. Default is FALSE.
na.rm
logical. Should NA be removed? Default is FALSE.
tests
Which tests to report, parametric or nonparamteric? The default c("parametric", "nonparametric")
reports both. See details. (Arguments may be abbreviated).
coin
logical or character. Should (permutation) tests from the coin package be reported? Default is TRUE corresponding to all implemented tests. FALSE calculates no tests from coin. A character vector may include any of the following
(potentially abbreviated) implemented tests (see also Details): c("permutation", "Wilcoxon", "media
alternative
a character, the alternative hypothesis must be one of "two.sided" (default),
"greater" or "less". You can specify just the initial letter, will be passed to
all functions.
perm.distribution
distribution argument to coin, see Distribution or , IndependenceTest.
Defaults to approximate(100000) indicating an approximation of the excat
conditional distribution with 100.000 Monte Carlo samples. One can use "exact"
for small samples and if paired = FALSE.
wilcox.exact
exact argument to wilcox.test.
wilcox.correct correct argument to wilcox.test.
Details
The parametric tests (currently) only contain the t-test and Welch/Statterwaithe/Smith/unequal
variance t-test implemented in t.test. The latter one is only displayed if paired = FALSE.
The nonparametric tests (currently) contain the Wilcoxon test implemented in wilcox.test (stats::Wilcoxon)
and (if coin = TRUE) the following tests implemented in coin:
• a permutation test oneway_test (the only test in this selction not using a rank transformation),
• the Wilcoxon test wilcox_test (coin::Wilcoxon), and
• the median test median_test.
Note that the two implementations of the Wilcoxon test probably differ. This is due to differences
in the calculation of the Null distributions.
12
md_12.1
Value
a list with up to two elements (i.e., paramteric and/or nonparamteric) each containing a data.frame
with the following columns: test, test.statistic, test.value, test.df, p.
Examples
with(sleep, compare.2.vectors(extra[group == 1], extra[group == 2]))
# gives:
## $parametric
##
test test.statistic test.value test.df
p
## 1
t
t
-1.861 18.00 0.07919
## 2 Welch
t
-1.861
17.78 0.07939
##
## $nonparametric
##
test test.statistic test.value test.df
## 1 stats::Wilcoxon
W
25.500
NA
## 2
permutation
Z
-1.751
NA
## 3 coin::Wilcoxon
Z
-1.854
NA
## 4
median
Z
1.744
NA
p
0.06933
0.08154
0.06487
0.17867
# compare with:
with(sleep, compare.2.vectors(extra[group == 1], extra[group == 2], alternative = "less"))
with(sleep, compare.2.vectors(extra[group == 1], extra[group == 2], alternative = "greater"))
# doesn't make much sense as the data is not paired, but whatever:
with(sleep, compare.2.vectors(extra[group == 1], extra[group == 2], paired = TRUE))
# from ?t.test:
compare.2.vectors(1:10,y=c(7:20, 200))
md_12.1
Data 12.1 from Maxwell & Delaney
Description
Hypothetical Reaction Time Data for 2 x 3 Perceptual Experiment: Example data for chapter 12 of
Maaxwell and Delaney (2004, Table 12.1, p. 574) in long format. Has two within.subjects factors:
angle and noise.
Usage
md_12.1
Format
A data.frame with 60 rows and 4 variables.
md_15.1
13
Details
Description from pp. 573:
Suppose that a perceptual psychologist studying the visual system was interested in determining the
extent to which interfering visual stimuli slow the ability to recognize letters. Subjects are brought
into a laboratory and seated in front of a tachistoscope. Subjects are told that they will see either
the letter T or the letter I displayed on the screen. In some trials, the letter appears by itself, but in
other trials, the target letter is embedded in a group of other letters. This variation in the display
constitutes the first factor, which is referred to as noise. The noise factor has two levels?absent and
present. The other factor varied by the experimenter is where in the display the target letter appears.
This factor, which is called angle, has three levels. The target letter is either shown at the center of
the screen (i.e., 0° off-center, where the subject has been instructed to fixate), 4° off-center or 8° offcenter (in each case, the deviation from the center varies randomly between left and right). Table
12.1 presents hypothetical data for 10 subjects. As usual, the sample size is kept small to make
the calculations easier to follow. The dependent measure is reaction time (latency), measured in
milliseconds (ms), required by a subject to identify the correct target letter. Notice that each subject
has six scores, one for each combination of the 2 x 3 design. In an actual perceptual experiment,
each of these six scores would itself be the mean score for that subject across a number of trials in
the particular condition. Although "trials" could be used as a third within-subjects factor in such
a situation, more typically trials are simply averaged over to obtain a more stable measure of the
individual’s performance in each condition.
Source
Maxwell, S. E., & Delaney, H. D. (2004). Designing experiments and analyzing data: a modelcomparisons perspective. Mahwah, N.J.: Lawrence Erlbaum Associates. p. 574
Examples
data(md_12.1)
# Table 12.5 (p. 578):
ez.glm("id", "rt", md_12.1, within = c("angle", "noise"),
args.return=list(correction = "none", es = "none"))
md_15.1
Data 15.1 / 11.5 from Maxwell & Delaney
Description
Hypothetical IQ Data from 12 children at 4 time points: Example data for chapter 11/15 of Maxwell
and Delaney (2004, Table 15.1, p. 766) in long format. Has two one within-subjects factor: time.
Usage
md_15.1
14
md_15.1
Format
Details
The data show that 12 subjects have been observed in each of 4 conditions. To make the example
easier to discuss, let’s suppose that the 12 subjects are children who have been observed at 30, 36,
42, and 48 months of age. In each case, the dependent variable is the child’s age-normed general
cognitive score on the McCarthy Scales of Children’s Abilities. Although the test is normed so that
the mean score is independent of age for the general population, our 12 children may come from a
population in which cognitive abilities are either growing more rapidly or less rapidly than average.
Indeed, this is the hypothesis our data allow us to address. In other words, although the sample
means suggest that the children’s cognitive abilities are growing, a significance test is needed if we
want to rule out sampling error as a likely explanation for the observed differences.
To replicate the results in chapter 15 several different contrasts need to be applied, see Examples.
time is time in months (centered at 0) and timecat is the same as a categorical variable.
Author(s)
R code for examples written by Ulf Mertens and Henrik Singmann
Source
Examples
### replicate results from Table 15.2 to 15.6 (Maxwell & Delaney, 2004, pp. 774)
data(md_15.1)
### ANOVA results (Table 15.2)
aov4(iq ~ timecat + (timecat|id),data=md_15.1, args.return=list(correction = "none"))
### Table 15.3 (random intercept only)
# we need to set the base level on the last level:
contrasts(md_15.1$timecat) <- contr.treatment(4, base = 4)
# "Type 3 Tests of Fixed Effects"
(t15.3 <- mixed(iq ~ timecat + (1|id),data=md_15.1, check.contrasts=FALSE))
# "Solution for Fixed Effects" and "Covariance Parameter Estimates"
summary(t15.3$full.model)
### make Figure 15.2
plot(NULL, NULL, ylim = c(80, 140), xlim = c(30, 48), ylab = "iq", xlab = "time")
plyr::d_ply(md_15.1, plyr::.(id), function(x) lines(as.numeric(as.character(x$timecat)), x$iq))
### Table 15.4, page 789
# random intercept plus slope
(t15.4 <- mixed(iq ~ timecat + (1+time|id),data=md_15.1, check.contrasts=FALSE))
md_16.1
15
### Table 15.5, page 795
# set up polynomial contrasts for timecat
contrasts(md_15.1$timecat) <- contr.poly
# fit all parameters separately
(t15.5 <- mixed(iq ~ timecat + (1+time|id), data=md_15.1, check.contrasts=FALSE,
per.parameter="timecat"))
# quadratic trend is considerably off, conclusions stay the same.
### Table 15.6, page 797
# growth curve model
(t15.6 <- mixed(iq ~ time + (1+time|id),data=md_15.1))
md_16.1
Data 16.1 / 10.9 from Maxwell & Delaney
Description
Hypothetical Reaction Time Data for 2 x 3 Perceptual Experiment: Example data for chapter 12 of
Maaxwell and Delaney (2004, Table 12.1, p. 574) in long format. Has two within.subjects factors:
angle and noise.
Usage
md_16.1
Format
Details
As brief background, the goal of the study here is to examine the extent to which female and male
clinical psychology graduate student trainees may assign different severity ratings to clients at initial
intake. Three female and 3 male graduate students are randomly selected to participate and each
is randomly assigned four clients with whom to do an intake interview, after which each clinical
trainee assigns a severity rating to each client, producing the data shown in Table 16.1.
Note that I changed the labeling of the id slightly, so that they are now labeled from 1 to 6. Furthermore, I changed the contrasts of sex to contr.treatment to replicate the exact results of Table
16.3 (p. 837).
Source
16
md_16.4
Examples
### replicate results from Table 16.3 (Maxwell & Delaney, 2004, p. 837)
data(md_16.1)
# original results need treatment contrasts:
(mixed1_orig <- mixed(severity ~ sex + (1|id), md_16.1, check.contrasts=FALSE))
summary(mixed1_orig$full.model)
# p-values stay the same with afex default contrasts (contr.sum),
# but estimates and t-values for the fixed effects parameters change.
(mixed1 <- mixed(severity ~ sex + (1|id), md_16.1))
summary(mixed1$full.model)
md_16.4
Data 16.4 from Maxwell & Delaney
Description
Data from a hypothetical inductive reasoning study.
Usage
md_16.4
Format
Details
Suppose an educational psychologist has developed an intervention to teach inductive reasoning
skills to school children. She decides to test the efficacy of her intervention by conducting a randomized design. Three classrooms of students are randomly assigned to the treatment condition,
and 3 other classrooms are assigned to the control.
Table 16.4 shows hypothetical data collected from 29 children who participated in the study assessing the effectiveness of the intervention to increase inductive reasoning skills. We want to call your
attention to several aspects of the data. First, the 15 children with condition values of 0 received
the control, whereas the 14 children with condition values of 1 received the treatment. Second, 4
of the children in the control condition were students in control Classroom 1, 6 of them were students in control Classroom 2, and 5 were students in control Classroom 3. Along similar lines, 3 of
the children in the treatment condition were students in treatment Classroom 1, 5 were students in
treatment Classroom 2, and 6 were students in treatment Classroom 3. It is essential to understand
that there are a total of six classrooms here; we have coded classroom from 1 to 3 for control as well
as treatment, because we will indicate to PROC MIXED that classroom is nested under treatment.
Third, scores on the dependent variable appear in the rightmost column under the variable label
"induct."
mixed
17
Note that it would make a lot more sense to change the labeling of room from 1 to 3 nested within
cond to 1 to 6. However, I keep this in line with the original. The random effects term in the call to
mixed is therefore a little bit uncommon.#’
Source
Examples
# data for next examples (Maxwell & Delaney, Table 16.4)
data(md_16.4)
str(md_16.4)
# p-values (almost) hold:
(mixed2 <- mixed(induct ~ cond + (1|room:cond), md_16.4))
# (1|room:cond) is needed because room is nested within cond.
mixed
Obtain p-values for a mixed-model from lmer().
Description
Fits and calculates p-values for all effects in a mixed model fitted with lmer. The default behavior calculates type 3 like p-values using the Kenward-Roger approximation for degrees-offreedom implemented in KRmodcomp (for LMMs only), but also allows for parametric bootstrap
(method = "PB"), or likelihood ratio tests (the latter two for LMMs and GLMMs). print, summary,
and anova methods for the returned object of class "mixed" are available (the last two return the
same data.frame).
Usage
mixed(formula, data, type = 3, method = c("KR", "PB", "LRT"),
per.parameter = NULL, args.test = list(), test.intercept = FALSE,
check.contrasts = TRUE, set.data.arg = TRUE, progress = TRUE,
cl = NULL, ...)
Arguments
formula
a formula describing the full mixed-model to be fitted. As this formula is passed
to lmer, it needs at least one random term.
data
data.frame containing the data. Should have all the variables present in fixed,
random, and dv as columns.
type
type of test on which effects are based. Only type 3 tests (3 or "III") are
correctly implemented (see Details).
18
mixed
method
character vector indicating which methods for obtaining p-values should be
used. "KR" (the default) corresponds to the Kenward-Roger approximation for
degrees of freedom (only working with linear mixed models). "PB" calculates
p-values based on parametric bootstrap. "LRT" calculates p-values via the likelihood ratio tests implemented in the anova method for merMod objects (only
recommended for models with many [i.e., > 50] levels for the random factors).
per.parameter
character vector specifying for which variable tests should be run for each
parameter (instead for the overall effect). Can be useful e.g., for testing ordered
factors. Relatively untested so results should be compared with a second run
without setting this argument. Uses grep for selecting parameters among the
fixed effects so regular expressions (regex) are possible. See Examples.
args.test
list of arguments passed to the function calculating the p-values. See Details.
test.intercept logical. Whether or not the intercept should also be fitted and tested for significance. Default is FALSE. Only relevant if type = 3.
check.contrasts
logical. Should contrasts be checked and (if necessary) changed to "contr.sum"?
See Details.
set.data.arg
logical. Should the data argument in the slot call of the merMod object returned from lmer be set to the passed data argument? Otherwise the name will
be data. Helpful if fitted objects are used afterwards (e.g., using lsmeans).
Default is TRUE.
progress
if TRUE, shows progress with a text progress bar and other status messages during
fitting.
cl
A vector identifying a cluster; used for distributing the estimation of the different
models using several cores. See examples. If ckeck.contrasts, mixed sets the
current contrasts (getOption("contrasts")) at the nodes. Note this does not
distribute calculation of p-values (e.g., when using method = "PB") across the
cluster. Use args.test for this.
...
further arguments (such as weights) passed to lmer.
Details
For an introduction to mixed-modeling for experimental designs see Barr, Levy, Scheepers, & Tily
(2013; I highly recommend reading this paper if you use this function), arguments for using the
Kenward-Roger approximation for obtaining p-values are given by Judd, Westfall, and Kenny
(2012). Further introductions to mixed-modeling for experimental designs are given by Baayen
and colleagues (Baayen, 2008; Baayen, Davidson & Bates, 2008; Baayen & Milin, 2010). Specific
recommendations on which random effects structure to specify for confirmatory tests can be found
in Barr and colleagues (2013) and Barr (2013).
p-values are per default calculated via methods from pbkrtest. When method = "KR" (the default),
the Kenward-Roger approximation for degrees-of-freedom is calculated using KRmodcomp, which is
only applicable to linear-mixed models. The test statistic in the output is a F-value (F).
method = "PB" calculates p-values using parametric bootstrap using PBmodcomp. This can be used
for linear and also generalized linear mixed models (GLMM) by specifying a family argument to
mixed. Note that you should specify further arguments to PBmodcomp via args.test, especially
nsim (the number of simulations to form the reference distribution) or cl (for using multiple cores).
mixed
19
For other arguments see PBmodcomp. Note that REML (argument to [g]lmer) will be set to FALSE if
method is PB.
method = "LRT" calculates p-values via likelihood ratio tests implemented in the anova method
for "merMod" objects. This is recommended by Barr et al. (2013; which did not test the other
methods implemented here). Using likelihood ratio tests is only recommended for models with
many levels for the random effects (> 50), but can be pretty helpful in case the other methods fail
(due to memory and/or time limitations). The lme4 faq also recommends the other methods over
likelihood ratio tests.
Type 3 tests are obtained by comparing a model in which only the tested effect is excluded with the
full model (containing all effects). This corresponds to the (type 3) Wald tests given by car::Anova
for "lmerMod" models. The submodels in which the tested effect is excluded are obtained by
manually creating a model matrix which si then fitted in "lme4". This is done to avoid R’s "feature"
to not allow this behavior.
Type 2 tests are truly sequential. They are obtained by comparing a model in which the tested
effect and all higher oder effect (e.g., all three-way interactions for testing a two-way interaction)
are excluded with a model in which only effects up to the order of the tested effect are present and
all higher order effects absent. In other words, there are multiple full models, one for each order of
effects. Consequently, the results for lower order effects are identical of whether or not higher order
effects are part of the model or not. This latter feature is not consistent with classical ANOVA type
2 tests but a consequence of the sequential tests (and I didn’t find a better way of implementing the
Type 2 tests). This does not correspond to the (type 2) Wald test reported by car::Anova. If you
want type 2 Wald tests instead of truly sequential typde 2 tests, use car::Anova with test = "F".
Note that the order in which the effects are entered into the formula does not matter (in contrast to
type 1 tests).
If check.contrasts = TRUE, contrasts will be set to "contr.sum" for all factors in the formula if
default contrasts are not equal to "contr.sum" or attrib(factor, "contrasts") != "contr.sum".
Furthermore, the current contrasts (obtained via getOption("contrasts")) will be set at the cluster nodes if cl is not NULL.
Value
An object of class "mixed" (i.e., a list) with the following elements:
1. anova.table a data.frame containing the statistics returned from KRmodcomp. The stat column in this data.frame gives the value of the test statistic, an F-value for method = "KR" and
a chi-square value for the other two methods.
2. full.model the "lmerMod" object returned from fitting the full mixed model.
3. restricted.models a list of "lmerMod" objects from fitting the restricted models (i.e., each
model lacks the corresponding effect)
4. tests a list of objects returned by the function for obtaining the p-values.
5. type The type argument used when calling this function.
6. method The method argument used when calling this function.
Three identical methods exist for objects of class "mixed": print, summary, and anova. They
all print a nice version of the anova.table element of the returned object (which is also invisibly
returned). This methods omit some columns and nicely round the other columns. The following
columns are always printed:
20
mixed
1. Effect name of effect
2. p.value estimated p-value for the effect
For LMMs with method="KR" the following further columns are returned (note: the Kenward-Roger
correction does two separate things: (1) it computes an effective number for the denominator df; (2)
it scales the statistic by a calculated amount, see also http://stackoverflow.com/a/25612960/
289572):
1. F computed F statistic
2. ndf numerator degrees of freedom (number of parameters used for the effect)
3. ddf denominator degrees of freedom (effective residual degrees of freedom for testing the
effect), computed from the Kenward-Roger correction using pbkrtest::KRmodcomp
4. F.scaling scaling of F-statistic computing from Kenward-Roger approximation.
For models with method="LRT" the following further columns are returned:
1. df.large degrees of freedom (i.e., estimated paramaters) for full model (i.e., model containing the corresponding effect)
2. df.small degrees of freedom (i.e., estimated paramaters) for restricted model (i.e., model
without the corresponding effect)
3. chisq 2 times the difference in likelihood (obtained with logLik) between full and restricted
model
4. df difference in degrees of freedom between full and restricted model (p-value is based on
these df).
For models with method="PB" the following further column is returned:
1. stat 2 times the difference in likelihood (obtained with logLik) between full and restricted
model (i.e., a chi-square value).
Note
When method = "KR", obtaining p-values is known to crash due too insufficient memory or other
computational limitations (especially with complex random effects structures). In these cases, the
other methods should be used. The RAM demand is a problem especially on 32 bit Windows which
only supports up to 2 or 3GB RAM (see R Windows FAQ). Then it is probably a good idea to use
methods "LRT" or "PB".
"mixed" will throw a message if numerical variables are not centered on 0, as main effects (of other
variables then the numeric one) can be hard to interpret if numerical variables appear in interactions.
See Dalal & Zickar (2012).
Please report all bugs to henrik.singmann (at) psychologie.uni-freiburg.de
Author(s)
Henrik Singmann with contributions from Ben Bolker and Joshua Wiley.
mixed
21
References
Baayen, R. H. (2008). Analyzing linguistic data: a practical introduction to statistics using R.
Cambridge, UK; New York: Cambridge University Press.
Baayen, R. H., Davidson, D. J., & Bates, D. M. (2008). Mixed-effects modeling with crossed random effects for subjects and items. Journal of Memory and Language, 59(4), 390-412. doi:10.1016/j.jml.2007.12.005
Baayen, R. H., & Milin, P. (2010). Analyzing Reaction Times. International Journal of Psychological Research, 3(2), 12-28.
Barr, D. J. (2013). Random effects structure for testing interactions in linear mixed-effects models.
Frontiers in Quantitative Psychology and Measurement, 328. doi:10.3389/fpsyg.2013.00328
Barr, D. J., Levy, R., Scheepers, C., & Tily, H. J. (2013). Random effects structure for confirmatory hypothesis testing: Keep it maximal. Journal of Memory and Language, 68(3), 255-278.
doi:10.1016/j.jml.2012.11.001
Dalal, D. K., & Zickar, M. J. (2012). Some Common Myths About Centering Predictor Variables
in Moderated Multiple Regression and Polynomial Regression. Organizational Research Methods,
15(3), 339-362. doi:10.1177/1094428111430540
Judd, C. M., Westfall, J., & Kenny, D. A. (2012). Treating stimuli as a random factor in social
psychology: A new and comprehensive solution to a pervasive but largely ignored problem. Journal
of Personality and Social Psychology, 103(1), 54-69. doi:10.1037/a0028347
Maxwell, S. E., & Delaney, H. D. (2004). Designing experiments and analyzing data: a modelcomparisons perspective. Mahwah, N.J.: Lawrence Erlbaum Associates.
See Also
ez.glm and aov.car for convenience functions to analyze experimental deisgns with classical
ANOVA or ANCOVA wrapping Anova.
see the following for the data sets from Maxwell and Delaney (2004) used and more examples:
md_15.1, md_16.1, and md_16.4.
Examples
data(md_15.1)
# random intercept plus slope
(t15.4a <- mixed(iq ~ timecat + (1+time|id),data=md_15.1))
# to also replicate exact parameters use treatment.contrasts and the last level as base level:
contrasts(md_15.1$timecat) <- contr.treatment(4, base = 4)
(t15.4b <- mixed(iq ~ timecat + (1+time|id),data=md_15.1, check.contrasts=FALSE))
summary(t15.4a$full.model) # gives "wrong" parameters extimates
summary(t15.4b$full.model) # identical parameters estimates
# for more examples from chapter 15 see ?md_15.1
data(md_16.1)
# original results need treatment contrasts:
22
mixed
(mixed1_orig <- mixed(severity ~ sex + (1|id), md_16.1, check.contrasts=FALSE))
# p-value stays the same with afex default contrasts (contr.sum),
# but estimates and t-values for the fixed effects parameters change.
(mixed1 <- mixed(severity ~ sex + (1|id), md_16.1))
summary(mixed1$full.model)
# data for next examples (Maxwell & Delaney, Table 16.4)
data(md_16.4)
str(md_16.4)
# Note that (1|room:cond) is needed because room is nested within cond.
# p-value (almost) holds.
(mixed2 <- mixed(induct ~ cond + (1|room:cond), md_16.4))
# (differences are dut to the use of Kenward-Roger approximation here,
# whereas M&W's p-values are based on uncorrected df.)
# again, to obtain identical parameter and t-values, use treatment contrasts:
summary(mixed2$full.model) # not identical
# prepare new data.frame with contrasts:
md_16.4b <- within(md_16.4, cond <- C(cond, contr.treatment, base = 2))
str(md_16.4b)
# p-value stays identical:
(mixed2_orig <- mixed(induct ~ cond + (1|room:cond), md_16.4b, check.contrasts=FALSE))
summary(mixed2_orig$full.model) # replicates parameters
# F-values (almost) hold, p-values (especially for skill) are off
(mixed3 <- mixed(induct ~ cond + skill + (1|room:cond), md_16.4))
# however, parameters are perfectly recovered when using the original contrasts:
mixed3_orig <- mixed(induct ~ cond + skill + (1|room:cond), md_16.4b, check.contrasts=FALSE)
# for this we need to center cog:
md_16.4b$cog <- scale(md_16.4b$cog, scale=FALSE)
# F-values and p-values are relatively off:
(mixed4 <- mixed(induct ~ cond*cog + (cog|room:cond), md_16.4b))
# contrast has a relatively important influence on cog
(mixed4_orig <- mixed(induct ~ cond*cog + (cog|room:cond), md_16.4b, check.contrasts=FALSE))
# parameters are again almost perfectly recovered:
mixed
23
## Not run:
# use the obk.long data (not reasonable, no random slopes)
data(obk.long)
mixed(value ~ treatment * phase + (1|id), obk.long)
# Examples for using the per.parammeter argument:
data(obk.long, package = "afex")
obk.long$hour <- ordered(obk.long$hour)
# tests only the main effect parameters of hour individually per parameter.
mixed(value ~ treatment*phase*hour +(1|id), per.parameter = "^hour$", data = obk.long)
# tests all parameters including hour individually
mixed(value ~ treatment*phase*hour +(1|id), per.parameter = "hour", data = obk.long)
# tests all parameters individually
mixed(value ~ treatment*phase*hour +(1|id), per.parameter = ".", data = obk.long)
# example data from package languageR:
# Lexical decision latencies elicited from 21 subjects for 79 English concrete nouns,
# with variables linked to subject or word.
data(lexdec, package = "languageR")
# using the simplest model
m1 <- mixed(RT ~ Correct + Trial + PrevType * meanWeight +
Frequency + NativeLanguage * Length + (1|Subject) + (1|Word), data = lexdec)
m1
##
##
##
##
##
##
##
##
##
##
Effect
1
Correct
2
Trial
3
PrevType
4
meanWeight
5
Frequency
6
NativeLanguage
7
Length
8
PrevType:meanWeight
9 NativeLanguage:Length
stat ndf
ddf F.scaling p.value
8.15
1 1627.73
1.00
.004
7.57
1 1592.43
1.00
.006
0.17
1 1605.39
1.00
.68
14.85 1
75.39
1.00 .0002
56.53 1
76.08
1.00 <.0001
0.70 1
27.11
1.00
.41
8.70
1
75.83
1.00
.004
6.18
1 1601.18
1.00
.01
14.24 1 1555.49
1.00 .0002
# Fitting a GLMM using parametric bootstrap:
require("mlmRev") # for the data, see ?Contraception
gm1 <- mixed(use ~ age + I(age^2) + urban + livch + (1 | district), method = "PB",
family = binomial, data = Contraception, args.test = list(nsim = 10))
#######################
### using multicore ###
#######################
24
nice.anova
require(parallel)
(nc <- detectCores()) # number of cores
cl <- makeCluster(rep("localhost", nc)) # make cluster
# to keep track of what the function is doindg redirect output to outfile:
# cl <- makeCluster(rep("localhost", nc), outfile = "cl.log.txt")
## There are two ways to use multicore:
# 1. Obtain fits with multicore:
mixed(value ~ treatment*phase*hour +(1|id), data = obk.long, method = "LRT", cl = cl)
# 2. Obtain PB samples via multicore:
mixed(use ~ age + I(age^2) + urban + livch + (1 | district), family = binomial,
method = "PB", data = Contraception, args.test = list(nsim = 10, cl = cl))
## Both ways can be combined:
mixed(use ~ age + I(age^2) + urban + livch + (1 | district), family = binomial,
method = "PB", data = Contraception, args.test = list(nsim = 10, cl = cl), cl = cl)
stopCluster(cl)
## End(Not run)
nice.anova
Make nice ANOVA table for printing.
Description
These functions produce a nice ANOVA table best for prointing. nice.anova takes an object from
Anova possible created by the convenience functions ez.glm or aov.car. When within-subject
factors are present, either sphericity corrected or uncorrected degrees of freedom can be reported.
Usage
nice.anova(object, es = "ges", observed = NULL, correction = c("GG", "HF", "none"),
MSE = TRUE, intercept = FALSE, sig.symbols = c(" +", " *", " **", " ***"))
Arguments
object
An object of class "Anova.mlm" or "anova" as returned from Anova, ez.glm,
or aov.car.
es
Effect Size to be reported. Default is "ges", which reports generalized etasquared (see details). Also supported is partial eta-squared ("pes") or "none".
observed
character vector referring to the observed (i.e., non manipulated) variables/effects
in the design. Important for calculation of generalized eta-squared (ignored if
es is not "ges"), see details.
nice.anova
25
correction
Character. Which sphericity correction on the degrees of freedom should be
reported for the within-subject factors. The default c("GG", "HF", "none")
corresponds to the Greenhouse-Geisser correction.
MSE
logical. Should the column containing the Mean Sqaured Error (MSE) be displayed? Default is TRUE.
intercept
logical. Should intercept (if present) be printed (default is FALSE which suppresses printing of the intercept)
sig.symbols
Character. What should be the symbols designating significance? When entering an vector with length(sig.symbol) < 4 only those elements of the default
(c(" +", " *", " **", " ***")) will be replaced. sig.symbols = "" will
display the stars but not the +, sig.symbols = rep("", 4) will display no
symbols.
Details
The returned data.frame is print-ready when adding to a document with proper methods. I recommend ascii and xtable. ascii provides conversion to AsciiDoc but most notably to org-mode (see
ascii and print-ascii). xtable converts a data.frame into LaTeX code with many possible options (e.g., allowing for "longtable" or "sidewaystable"), see xtable and print.xtable. See
Examples.
Conversion functions to other formats (such as HTML, ODF, or Word) can be found at the Reproducible Research Task View.
The default reports generalized eta squared (Olejnik & Algina, 2003), the "recommended effect
size for repeated measured designs" (Bakeman, 2005). Note that it is important that all measured
variables (as opposed to experimentally manipulated variables), such as e.g., age, gender, weight,
..., must be declared via observed to obtain the correct effect size estimate. Partial eta squared
("pes") does not require this.
Value
A data.frame with the ANOVA table consisting of characters. The columns that are always present
are: Effect, df (degrees of freedom), F, and p.
ges contains the generalized eta-squared effect size measure (Bakeman, 2005), pes contains partial
eta-squared (if requested).
Author(s)
The code for calculating generalized eta-squared was written by Mike Lawrence.
Everything else was written by Henrik Singmann.
References
Bakeman, R. (2005). Recommended effect size statistics for repeated measures designs. Behavior
Research Methods, 37(3), 379-384. doi:10.3758/BF03192707
Olejnik, S., & Algina, J. (2003). Generalized Eta and Omega Squared Statistics: Measures of Effect
Size for Some Common Research Designs. Psychological Methods, 8(4), 434-447. doi:10.1037/1082989X.8.4.434
26
obk.long
See Also
ez.glm and aov.car are the convenience functions to create the object appropriate for nice.anova.
Examples
## example from Olejnik & Algina (2003)
# "Repeated Measures Design" (pp. 439):
data(md_12.1)
# create object of class Anova:
rmd <- ez.glm("id", "rt", md_12.1, within = c("angle", "noise"),
return = "Anova")
# use different es:
nice.anova(rmd, es = "pes") # noise: .82
nice.anova(rmd, es = "ges") # noise: .39
# exampel using obk.long (see ?obk.long), a long version of the OBrienKaiser dataset from car.
data(obk.long)
# create object of class Anova:
tmp.aov <- aov.car(value ~ treatment * gender + Error(id/phase*hour),
data = obk.long, return = "Anova")
nice.anova(tmp.aov, observed = "gender")
nice.anova(tmp.aov, observed = "gender", sig.symbol = rep("", 4))
## Not run:
# use package ascii or xtable for formatting of tables ready for printing.
full <- nice.anova(tmp.aov, observed = "gender")
require(ascii)
print(ascii(full, include.rownames = FALSE, caption = "ANOVA 1"), type = "org")
require(xtable)
print.xtable(xtable(full, caption = "ANOVA 2"), include.rownames = FALSE)
## End(Not run)
obk.long
O’Brien Kaiser’s Repeated-Measures Dataset with Covariate
Description
This is the long version of the OBrienKaiser dataset from the car pakage adding a random covariate age. Originally the dataset ist taken from O’Brien and Kaiser (1985). The description from
OBrienKaiser says: "These contrived repeated-measures data are taken from O’Brien and Kaiser
(1985). The data are from an imaginary study in which 16 female and male subjects, who are divided into three treatments, are measured at a pretest, postest, and a follow-up session; during each
session, they are measured at five occasions at intervals of one hour. The design, therefore, has two
between-subject and two within-subject factors."
round_ps
27
Usage
obk.long
Format
A data frame with 240 rows and 7 variables.
Source
O’Brien, R. G., & Kaiser, M. K. (1985). MANOVA method for analyzing repeated measures designs: An extensive primer. Psychological Bulletin, 97, 316-333. doi:10.1037/0033-2909.97.2.316
Examples
# The dataset is constructed as follows:
set.seed(1)
OBrienKaiser2 <- within(OBrienKaiser, {
id <- factor(1:nrow(OBrienKaiser))
age <- scale(sample(18:35, nrow(OBrienKaiser), replace = TRUE), scale = FALSE)})
attributes(OBrienKaiser2$age) <- NULL # needed or resahpe2::melt throws an error.
OBrienKaiser2$age <- as.numeric(OBrienKaiser2$age)
obk.long <- reshape2::melt(OBrienKaiser2, id.vars = c("id", "treatment", "gender", "age"))
obk.long[,c("phase", "hour")] <- lapply(as.data.frame(do.call(rbind,
strsplit(as.character(obk.long$variable), "\\."),)), factor)
obk.long <- obk.long[,c("id", "treatment", "gender", "age", "phase", "hour", "value")]
obk.long <- obk.long[order(obk.long$id),]
rownames(obk.long) <- NULL
str(obk.long)
## 'data.frame':
## $ id
: Factor w/ 16 levels "1","2","3","4",..: 1 1 1 1 1 1 1 1 1 1 ...
## $ treatment: Factor w/ 3 levels "control","A",..: 1 1 1 1 1 1 1 1 1 1 ...
## $ gender
: Factor w/ 2 levels "F","M": 2 2 2 2 2 2 2 2 2 2 ...
## $ age
: num -4.75 -4.75 -4.75 -4.75 -4.75 -4.75 -4.75 -4.75 -4.75 -4.75 ...
## $ phase
: Factor w/ 3 levels "fup","post","pre": 3 3 3 3 3 2 2 2 2 2 ...
## $ hour
: Factor w/ 5 levels "1","2","3","4",..: 1 2 3 4 5 1 2 3 4 5 ...
## $ value
: num 1 2 4 2 1 3 2 5 3 2 ...
head(obk.long)
##
id treatment gender
age phase hour value
## 1 1
control
M -4.75 pre
1
1
## 2 1
control
M -4.75 pre
2
2
## 3 1
control
M -4.75 pre
3
4
## 4 1
control
M -4.75 pre
4
2
## 5 1
control
M -4.75 pre
5
1
## 6 1
control
M -4.75 post
1
3
round_ps
Helper function which rounds p-values
28
set_sum_contrasts
Description
p-values are rounded in a sane way: .99 - .01 to two digits, < .01 to three digits, < .001 to four digits.
Usage
round_ps(x)
Arguments
x
a numeric vector
Value
A character vector with the same length of x.
Author(s)
Henrik Singmann
Examples
round_ps(runif(10))
round_ps(runif(10, 0, .01))
round_ps(runif(10, 0, .001))
round_ps(0.0000000099)
set_sum_contrasts
Set global contrasts
Description
These functions are simple wrappers to set contrasts globally via options(contrasts = ...).
Usage
set_sum_contrasts()
set_deviation_contrasts()
set_effects_contrasts()
set_default_contrasts()
set_treatment_contrasts()
set_sum_contrasts
29
Details
set_deviation_contrasts and set_effects_contrasts are wrappers for set_sum_contrasts.
Likewise, set_default_contrasts is a wrapper to set_treatment_contrasts().
Value
nothing. These functions are called for their side effects to change the global options.
Index
∗Topic dataset
md_12.1, 12
md_15.1, 13
md_16.1, 15
md_16.4, 16
obk.long, 26
∗Topic package
afex-package, 2
mean, 5
mixed, 6, 8, 17
afex-package, 2
allFit, 3
Anova, 4–7, 21, 24
aov, 4, 5, 7
aov.car, 4, 21, 24, 26
aov4 (aov.car), 4
ascii, 25
PBmodcomp, 18, 19
poly, 6
print.xtable, 25
nice.anova, 5, 6, 8, 24
obk.long, 8, 26
OBrienKaiser, 26
oneway_test, 11
regex, 18
round_ps, 27
set_default_contrasts
(set_sum_contrasts), 28
set_deviation_contrasts
set_effects_contrasts
set_sum_contrasts, 28
set_treatment_contrasts
summary.Anova.mlm, 7
compare.2.vectors, 10
contr.sum, 6
Distribution, 11
ez.glm, 21, 24, 26
ez.glm (aov.car), 4
ezANOVA, 7
family, 18
t.test, 11
grep, 18
univ (aov.car), 4
update.merMod, 3
I, 6
IndependenceTest, 11
wilcox.test, 11
wilcox_test, 11
KRmodcomp, 17–19
xtable, 25
lmer, 17, 18
md_12.1, 12
md_15.1, 13, 21
md_16.1, 15, 21
md_16.4, 16, 21
30

Package ‘afex’ October 12, 2014

Transcription

Similar documents

Package 'afex'

Analisis Statistik

Rotrex C38 Supercharger range

What Is ANOVA? One-way ANOVA

Elementary Statistics Sample Exam #3

COGS 14B / Introduction to Statistical Analysis

Douglass, AE_Zodical Light and Counter

The MotoTech Manufacturing Company: Design of Experiments

Function-Structure Integration in FreeSurfer

Review for the Final Exam STAT E-150 Statistical Methods