HP StoreFabric CN1100R Converged Network Adapter from QLogic Data Sheet
Transcription
HP StoreFabric CN1100R Converged Network Adapter from QLogic Data Sheet
Data Sheet HP StoreFabric CN1100R Converged Network Adapter from QLogic •• Full line-rate 10GbE performance across all ports •• Consolidate network and storage traffic over converged 10GbE connections •• Boost host CPU efficiency with full hardware offload for iSCSI and FCoE storage traffic •• Improve reliability and interoperability-leveraging QLogic’s market proven converged networking leadership •• Industry-leading FCoE performance of up to 2.6 million IOPS and iSCSI performance of up to 1.5 million IOPS, suitable for high-density server virtualization and large databases OVERVIEW ROBUST VIRTUALIZATION CAPABILITY The HP StoreFabric CN1100R Converged Network Adapter is ideal for customers deploying virtual server environments. This adapter from HP and QLogic provides superior network performance with support for VMware® NetQueue and Microsoft® VMQ technologies. Virtual network management and efficiency is enhanced with support for VLAN/VLAN tagging. The HP StoreFabric® CN1100R Dual Port Converged Network Adapter provides Ethernet, iSCSI, and Fibre Channel connectivity over 10GbE using both Fibre Channel over Ethernet (FCoE) and Converged Enhanced Ethernet (CEE) standards. By consolidating Ethernet, iSCSI, and Fibre Channel onto a converged network adapter, the HP StoreFabric CN1100R reduces the number of separate adapters and cables required for your data center and also reduces operational, power, and cooling costs while preserving existing Ethernet and Fibre Channel infrastructure. This HP Converged Network Adapter has been thoroughly tested with HP ProLiant®-servers and HP Top of Rack (ToR) and End of Row (EoR) switches to ensure an optimal HP FCoE connectivity solution for your data center. The HP StoreFabric CN1100R also supports network partitioning (NPAR), which provides the capability to virtualize the physical 10GbE ports at the adapter level. Each port can be virtualized into four distinct functions, and administrators can set quality of service (QoS) parameters based on bandwidth requirements. The QoS can be set in 100Mbps increments or on a priority basis using HP or QLogic management utilities. ACCELERATE SERVER PERFORMANCE The HP StoreFabric CN1100R boosts network performance with full linerate 10GbE throughput across all ports. With full hardware offload for both FCoE and iSCSI traffic, the CN1100R increases server performance. Customers can also maximize server processing performance by reducing CPU overhead and lowering interrupt latency through the use of the MSI-X standard supported by the CN1100R. STREAMLINE DEPLOYMENT AND MANAGEMENT The HP StoreFabric CN1100R Converged Network Adapter is based on industry leading QLogic technology. The CN1100R can provide concurrent iSCSI and FCoE functionality on a single adapter, simplifying server deployment for customers using both iSCSI and Fibre Channel storage networks. This adapter from HP also supports transmit/receive side scaling (TSS/ RSS), which boosts performance in Windows® and Linux® environments by directing interrupts to the server’s CPU cores. A single adapter with a single driver can enable customers to deploy a common server configuration in environments that require either or both BC0058018-00 Rev. A 10/14 1 HP StoreFabric CN1100R Data Sheet The HP StoreFabric CN1100R Converged Network Adapter is also designed to work in a variety of environments. HP supports this adapter across a wide variety of HP server platforms, and it has been tested with numerous HP and non-HP storage systems. iSCSI and Fibre Channel connectivity. This advanced capability, along with features like NPAR, means fewer adapters are needed to provide serverto-server and server-to-storage connectivity. This capability results in simplified deployment and manageability along with higher reliability and lower cost (fewer components required). SPECIFICATIONS ADVANCED FEATURES AND STANDARDS OPERATING SYSTEM SUPPORT Date Rate •• 10Gbps per port, per direction •• Up to 40Gbps bi-directional near line rate throughput Bus Type •• x8 PCIe 2.0 with MSI-x and INTx •• Windows Server® •• Windows Server® Hyper-V™ •• VMware® •• RHEL™ •• SLES™ •• Citrix® XenServer® PRODUCT SUPPORT INFORMATION Controller •• QLogic 57810S Refer to the HP Single Point of Connectivity Knowledge for HP Storage Products at: www. hp.com/storage/spock for specific product support information. Connector •• SFP+ or direct attach copper (DAC) SERVER SUPPORT INFORMATION Protocols Supported •• FCoE •• Ethernet •• iSCSI •• HP ProLiant Gen8 Servers: DL320e, DL360e, DL360p, DL380e, DL380p, DL385p, DL560, DL580, ML350e, ML350p, SL230s, SL250s •• HP ProLiant Gen9 Servers: DL160, DL180, DL360, DL380, ML350 WHAT IS INCLUDED IN THE BOX •• CNA •• Low-profile bracket Management •• HP utilities including Converged Network Utility (CNU) •• Comprehensive Configuration Manager (CCM) utility •• QLogic Adapter Management Tools Refer to the HP Server QuickSpecs for details regarding supported server options at www. hp.com/go/qs. •• VLAN tagging •• Adaptive interrupt coalescing •• MSI-X •• NIC teaming (bonding) •• Receive side scaling (RSS) •• Jumbo frames •• Checksum & Segmentation Offload •• Pre-execution environment boot •• NVGRE/VXLAN Tunneling Offloads •• VMware NetQueue •• Microsoft VMQ •• Network partitioning •• Single root I/O virtualization •• PCI Bus Power Management Interface (rev 1.2) •• Advanced error reporting (AER) •• TCP segmentation/large send offload •• ACPI v2.0 •• SMBus 2.0 •• IPv4 (RFQ 791), IPv6 (RFC 2460) •• IEEE: 802.3x, 802.3ad/802.1ax, 802.3ae, 802.1q, 802.1as/1588 (Precision Time Protocol), 802.1Qaz, 802.1Qbb, 802.1Qbg, 802.1Qbh FORM FACTOR •• PCI Express® low-profile form factor 16.76cm x 6.89cm (6.60” x 2.71”) For more information, visit us on the web at: www.qlogic.com/go/hp For questions or enquiries, e-mail [email protected] DISCLAIMER Reasonable efforts have been made to ensure the validity and accuracy of these performance tests. QLogic Corporation is not liable for any error in this published white paper or the results thereof. Variation in results may be a result of change in configuration or in the environment. QLogic specifically disclaims any warranty, expressed or implied, relating to the test results and their accuracy, analysis, completeness or quality. Follow us: Share: Corporate Headquarters International Offices QLogic Corporation 26650 Aliso Viejo Parkway Aliso Viejo, CA 92656 949-389-6000 UK | Ireland | Germany | France | India | Japan | China | Hong Kong | Singapore | Taiwan www.qlogic.com © 2014 QLogic Corporation. Specifications are subject to change without notice. All rights reserved worldwide. QLogic, the QLogic logo, and QConvergeConsole are registered trademarks of QLogic Corporation. Citrix and XenServer are registered trademarks of Citrix Systems, Inc. in the United States and/or other countries. BladeSystem, FlexFabric, HP, HP-UX, Integrity, ProLiant, and StoreFabric are registered trademarks of Hewlett-Packard Company. Linux is a registered trademark of Linus Torvalds. Microsoft and Windows are registered trademarks of Microsoft Corporation. SLES is a registered trademark of Novell, Inc. in the United States and other countries. Oracle is a registered trademarks of Oracle Corporation. PCIe is a registered trademarks of PCI-SIG Corporation. RHEL is a registered trademark of Red Hat, Inc. in the United States and other countries. VMware, ESX, and vSphere are trademarks or registered trademarks of VMware, Inc. in the United States and other countries. All other brand and product names are trademarks or registered trademarks of their respective owners. Information supplied by QLogic Corporation is believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any errors in this brochure. QLogic Corporation reserves the right, without notice, to make changes in product design or specifications. BC0058018-00 Rev. A 10/14 2