VERONEX Cases
Transcription
VERONEX Cases
VERONEX Cases VERONEX is a breakthrough in plastic enclosure design, combining the versatility and functionality demanded by engineers, with the modern styling appreciated by their customers. The VERONEX range, available in 5 different plan sizes and 9 heights, is manufactured in UL94-V0 flame retardant ABS. The enclosures boast an attractive, lightly textured non-scratch finish which has been achieved using a unique chemical etch process. A selection of quality accessories ideally suits VERONEX enclosures to a wide variety of OEM and consumer electronics, electrical and telecommunications applications. (see page14). MATERIAL PERFORMANCE CHARACTERISTICS ABS (FLAME RETARDANT) MECHANICAL PROPERTIES Izod impact strength Units J/m Test method ASTM D256 Result 60 ISO R180 Impact strength Unnotched Notched Tensile properties Yield strength Failure strength Elastic modulus Flexural properties Maximum load Deflection at break Elastic modulus THERMAL PROPERTIES Heat deflection temperature Vicat softening point Melt flow index UL combustibility test UL file number ELECTRICAL PROPERTIES Specific volume resistivity Dielectric strength KJ/m2 KJ/m2 KJ/m2 DIN 53453 ISO R179 70 7 N/mm2 N/mm2 N/mm2 similar to DIN53455 17 22 1800 N/mm2 mm N/mm2 ASTM D790 ISO 178 35 1900 Units °C Test method ASTM D648 DIN 53461 ISO 75A ASTM D1525 DIN 53460 ISO 306 ASTM D1238 DIN 53735 ISO R1133 UL subject 94 Result 85 Test method DIN 53482 VDE 0303 IEC243 DIN 53481 Result 450 °C °C g/10mins Fire classification E70014(M) Units Ohm. cm KV/mm ISO R527 VERONEX 98 89 10 V-O 44 7 VERONEX IP62 Rated Cases The VERONEX IP62 range is available in 4 plan sizes and 9 different heights. The enclosure is a simple two part construction with plastic end panels which are readily push fitted between two ribs in the case moulding. This, together with the tongue-and-groove joint which connects the two covers, achieves the IP62 seal against the ingress of dust and water. Contents of kit Description Base moulding Top moulding Moulded end panels Case fixing screws Self adhesive feet (size 3 and 4 only) Self-tapping pcb screws Qty. 1 1 2 4 4 Material/Finish RAL 7035,UL94-V0 flame retardant ABS RAL 7035,UL94-V0 flame retardant ABS RAL 7037,UL94-V0 flame retardant ABS VERONEX IP62 size 1 and 2 4 SIZE 1 EXPLANATION OF IP RATING Usable wall height Ordering information Description Size 1 Size 1 Black Size 2 Size 2 Black H 90 90 90 90 90 120 120 120 120 120 W 50 50 50 50 50 60 60 60 60 60 D 16 24 32 16 24 30 40 50 30 40 Order code 75-227894 75-227895 75-227896 75-237424 75-237425 75-227897 75-227898 75-227899 75-237426 75-237427 PCB Centres = Limitation of infress of dust = Protection against water dripping non-vertically 50.00 PCB Centres 82.8 Usable internal length For details of a full range of VERONEX compatible accessories, please refer to page 15. SIZE 2 PCB Centres 80.00 PCB Centres 111.40 USABLE INTERNAL LENGTH 8 Usable wall height 9.6 / 19.2 VERONEX IP62 Rated Cases Contents of kit Item/Description Base moulding Top moulding Moulded end panels Case fixing screws Self adhesive feet (size 3 and 4 only) Self-tapping pcb screws Ordering information Description Size 3 Size 3 Black Size 4 Qty. 1 1 2 4 4 Material/Finish RAL 7035,UL94-V0 flame retardant ABS RAL 7035,UL94-V0 flame retardant ABS RAL 7037,UL94-V0 flame retardant ABS 4 H 150 150 150 150 150 190 190 W 80 80 80 80 80 100 100 D 30 45 60 30 45 40 60 Order code 75-227900 75-227901 75-227902 75-237429 75-237430 75-227903 75-227904 190 100 80 75-227905 VERONEX IP62 size 3 and 4 SIZE 3 Usable wall height For details of a full range of VERONEX compatible accessories, please refer to page 15. 55.00 PCB Centres 110.00 PCB Centres 100.00 PCB Centres 141.40 Usable internal length Usable wall height 14.0 / 35.0 SIZE 4 75.00 PCB Centres 150.0 PCB Centres Usable internal length 9 10 VERONEX Hand–held Cases These size 2 and 3 cases are supplied in black and feature both LCD display and membrane keypad areas on the top cover, and a battery compartment on the base. Qty. 1 1 2 4 4 Ordering information Description: With battery compartment Size L 2 120 150 3 150 Material/Finish Black, UL94-V0 flame retardant ABS Black, UL94-V0 flame retardant ABS Black, UL94-V0 flame retardant ABS Clear polycarbonate VERONEX hand held W 60 80 80 H 30 30 45 Order code 75-237428 75-237431 75-237432 SIZE 2 LCD TOP Membrane recess = 1.0 mm 74.00 Key pad area Key pad area Contents of kit Description Base moulding 1 Top moulding 2 Moulded end panels 4 Fixing screws 4 Self tapping pcb screws LCD lens For details of a full range of VERONEX compatible accessories, please refer to page 15. SIZE 3 LCD TOP Key pad area Membrane recess = 1.0 mm 96.00 Key pad area SIZE 3 with battery compartment 60.00 PCB Centres 60.00 110.00 PCB Centres 141.40 Usable internal length 11 VERONEX Instrument Cases The instrument case range consists of two cover mouldings and two end panels - one plastic and one aluminium. Battery compartments with sliding covers are supplied as standard in 9 different unit sizes. Battery holders, used in conjunction with the battery compartment are designed to accept a variety of battery sizes. The two smaller plan sizes (2 and 3) can be fitted with an optional belt clip accessory, and the larger units are supplied with 4 self adhesive non slip feet for table top instrumentation applications. Knock-out keyslots are stamped in the mouldings for wall mounted instrumentation applications. Contents of kit Description Base moulding Top moulding Moulded end panel Aluminium end panel Case fixing screws Qty. 1 1 1 1 4 VERONEX instrument Material/Finish RAL 7035,UL94-V0 flame retardant ABS RAL 7035,UL94-V0 flame retardant ABS RAL 7035,UL94-V0 flame retardant ABS 1,6mm anodised aluminium SIZE 2 Usable wall height with battery compartment Self adhesive feet 4 (sizes 3,4 and 5) Self tapping pcb screws 4 Battery cover in battery compartment versions. W 60 60 60 60 60 60 D 30 40 50 30 40 50 Order code 75-228099 75-228100 75-228101 75-228102 75-228103 75-228104 Description: With battery compartment Size H 2 120 2 120 3 150 3 150 W 60 60 80 80 D 30 40 30 45 Order code 75-227915 75-227916 75-227917 75-227918 Case will accept Shallow Battery Box Case will accept either Shallow or Deep Battery Box 111.40 Usable internal length PCB Boss position in plain case SIZE 3 with battery compartment Usable wall height PCB Centres PCB Centres Ordering information Description: Without battery compartment Size H 120 2 120 120 120 3 120 120 For details of a full range of VERONEX compatible accessories, please refer to page 15. 141.40 Usable internal length PCB Boss position in plain case SIZE 2 - SHALLOW BATTERY BOX SHALLOW SHALLOW DEEP SHALLOW 12 VERONEX Instrument Cases Contents of kit Description Qty. Material/Finish Base moulding 1 RAL 7035,UL94-V0 flame retardant ABS Top moulding 1 RAL 7035,UL94-V0 flame retardant ABS Moulded end panel 1 RAL 7035,UL94-V0 flame retardant ABS Aluminium end panel 1 1,6mm anodised aluminium Case fixing screws 4 Self adhesive feet 4 (sizes 3,4 and 5) Self tapping pcb screws 4 Battery cover in battery compartment versions. (as base moulding) 5 185 185 185 Description: With battery compartment Size H 4 190 4 190 5 185 5 185 VERONEX instrument W 100 100 100 D 40 60 80 Order code 75-228105 75-228106 75-228107 135 135 135 40 65 80 75-228108 75-228109 75-228110 W 100 100 135 135 D 40 60 40 65 Order code 75-227920 75-227921 75-227922 75-227923 Case will accept Shallow Battery Box Case will accept either Shallow or Deep Battery Box For details of a full range of VERONEX compatible accessories, please refer to page 15. SIZE 4 with battery compartment SIZE 5 with battery compartment Usable wall height Usable wall height 100.0 PCB Centres 150.0 PCB Centres 95.0 PCB Centres 110.0 PCB Centres Ordering information Description: Without battery compartment Size H 190 4 190 190 179.9 Usable internal length PCB Boss position in plain case 145.00 PCB Centres PCB Boss position in plain case 175.0 Usable internal length SIZE 4 - SHALLOW / DEEP BATTERY BOX SHALLOW DEEP SHALLOW SIZE 5 - SHALLOW / DEEP BATTERY BOX SHALLOW DEEP SHALLOW 13 VERONEX EMC Cases VERONEX EMC cases have been introduced to meet the increasing demand for protection from potentially damaging E and H field interferences. The mouldings have been coated with copper silver paint (25m - 50m) and the tongue and groove joints ensure good continuity along the enclosure. The end panels are also uniquely retained to ensure good electrical contact when coatings are applied. The enclosures available offer a variety of styles, plastic end panels, metal end panels, battery compartments and accessories. Contents of kit Description Qty Material/Finish Base moulding 1 RAL 7035,UL94-V0 flame retardant ABS Top moulding 1 RAL 7035,UL94-V0 flame retardant ABS Moulded end panel 2 RAL 7035,UL94-V0 flame retardant ABS Case fixing screws 4 Self adhesive feet 4 (sizes 3,4 and 5) Self tapping pcb screws 4 Battery cover in battery compartment versions (as base moulding) Ordering information Size 1 2 3 4 H 90 90 120 150 190 190 W 50 50 60 80 100 100 D 16 24 30 30 40 60 Order code 75-245323 75-245324 75-245325 75-245327 75-245328 75-245326 Note: Battery compartment version For details of a full range of VERONEX compatible accessories, please refer to page 15. 14 VERONEX EMC cases RFI SHIELDING EFFECTIVENESS Case coating Zinc Arc spray Case coating Evaporative Disposition Case coating Copper Silver paint Attenuation (Db) Good adhesion is achieved on plastic substrate and the copper silver is resistant to atmospheric oxidation and corrosion. Coatings are applied by conventional spraying techniques using electroform masks for precise selectivity of coverage. E Field Frequency (Hz) Plane wave VERONEX Accessories VENTED END PANELS In addition to the plastic and aluminium panels, ventilated aluminium end panels are available for all size 2 units. These are useful for enclosures which are required to house small alarms or buzzers, or to permit airflow across delicate components. Ordering information Qty. 1 Size 2 Case 1 1 H 120 120 120 W 60 60 60 D 30 40 50 Order code 75-227740 75-227742 75-227745 BELT-CLIPS Belt-clips, manufactured in RAL 7035 high impact polystyrene, can be fitted to sizes 1, 2 and 3 units of the VERONEX range. They are supplied with fixings which screw into two of the four case moulding mounting bosses. VERONEX Accessories ABSORPTION Ordering information Size Qty Size 1 Case 1 Size 2 Case 1 Size 3 Case 1 Black 75-237433 75-237434 75-237435 Grey 75-226648 75-226658 75-226670 100% POLYCARBONATE LCD COVERS Polycarbonate windows are available for fitting over LCD displays in the case moulding recess. Size 2 units will accept a 40x20mm LCD (viewing area 31x14) and size 3 will accept a 60x30mm LCD (viewing area 47x18mm). Ordering information Size Qty. Size 2 Case 1 Size 3 Case 1 1100NM 750NM Order code 75-250724 75-250718 BATTERY BOXES Wavelength (Nanometers) INFRA RED END PANELS Battery compartments are available in 2 depths. The shallow recess can accept one PP3 or one 2AAA battery holder, while the deeper compartment is suitable for one 4AA, one 2AA or one 4AAA holder. These are designed to fit neatly into the VERONEX enclosures giving a medium transparent to infra red transmissions. The wavelength of operation is between 750nm and 1100nm. These are ideally suited to remote control applications. Ordering information Type Qty. Battery holders Shallow 1 Accept 1 x PP3 or 2 x AAA holders Deep 1 Accept 1 x 4AA or 1 x 2AA or 1 x 4AAA holder Ordering information Size Colour Order code 75-226685 75-226686 SELF-ADHESIVE RUBBER FEET Self-adhesive rubber feet are available for fixing to the base of VERONEX units in tabletop applications. Ordering information Feet Qty. Self-adhesive feet 4 Size 1 Case Black Size 2 Case Size 3 Case Size 4 Case Black Black Black H 90 90 120 150 190 W 50 50 60 80 100 D 16 24 30 30 40 Order code 75-237739 75-237741 75-237742 75-237743 75-237744 Order code 75-228117 BATTERY HOLDERS Battery holders are used in conjunction with the deep or smaller battery boxes. These give the user maximum flexibility in selecting the battery type required. Ordering information Description PP3 leads 2AA holder 4AA holder 2AAA holder 4AAA holder Qty 10 1 1 1 1 Order code 75-28183J 75-227429A 50-1717G 75-227427G 75-226687A 15