October – November 2014

Transcription

October – November 2014
October – November 2014
Optrel e684x1 Sh 5 – 13 Auto Welding Helmet
The ultimate in welding helmets is now here. The Optrel e684x1 is
the most advanced welding helmet on sale today. It is suitable for all
modes of electric arc welding, gas welding/cutting, plasma cutting and
micro plasma welding. True colour lens technology, adaptive shade
autopilot from shade 5 – 13, grind mode, heat reflective paint finish,
High Definition viewing and Twilight ADF technology, you will not find
another welding helmet like it.
You only have one pair of eyes, why would you trust them with a
cheap, nasty helmet? Do not settle for anything less than an Optrel
welding helmet.
Optrel e684x1 for only $625.00
Optrel e3000 PAPR unit
Optrel are pleased to announce the release of their e3000 PAPR
(powered air purifying respirator) with the new THP3 rated filtration
system. Supplied standard with a 10 hour battery (20 hour available
on request), 3 fan speeds (150 – 250 l/min), low cost consumables
and either the e680 Sh 5-13 auto helmet or the new Galaxy High
Impact flip front welding helmet.
The e3000 comes in a carry case for ease of storage and also available
with hardhat adaptors for the helmets.
Packages starting from $1495
Tradegear 2 piece Swivel Knee Pads
The most comfortable knee pads you will ever wear, these
were designed in the USA by tradies, for tradies! Jointed to
flex with the natural movement of the knee, multi grip strips
for more even weight distribution and greater stability, dual
density EVA foam inner pads for softness and support as well
as air vents to control heat build-up.
Used worldwide by engineers, sheeties, grunts, panelbeaters,
sparkies, spanner handlers and just about any other trade
you can think of a nickname for.
Also available is the EVA kneeling mat. Designed for trade use on concrete
floors, this is made using a 1st grade EVA with closed cells for maximum softness
and it won’t absorb oil or liquids. It will also withstand light chemicals. Perfect
for quick jobs or all day on your knees begging for mercy.
Knees Pads for $50 pair.
Kneeling Mat $33 ea.
Phone (06) 213-9373. Cell (027) 323-7958. Fax (06) 323-7958.
Email [email protected]. Website www.hwcs.co.nz
Get a free can of Anti-Spatter with every order over $150
Every order in October and November with a value of $150.00 + gst or more gets a free can of CJT
Anti-Spatter. Offer limited while stocks last.
Helvi Galileo 175 Tig/MMA welder Package
Another little gem from Helvi, the Galileo 175 with liftarc tig, anti-sticking
MMA, automatic line voltage compensation and over temperature control,
this great little machine is built for workshop and site use.
Duty Cycle – 60% @ 120amp, 35% @ 160amp
Weight – 5.8kg
Galileo 175 Package c/w 4mtr Earth/Arc set - $795.00
WECO Discovery 161T HF Pulse Tig Welder
A great little HF Pulse tig being used in workshops and on worksites all
over NZ. The Tig functions include pre gas, post gas, up and down slope
control, final current, a pulse frequency from 0.5 to 250Hz and a proper 2T
and 4T trigger control.
Duty Cycle – 60% @ 120amp, 25% @ 160amp.
Weight – 5.4kg
WECO Discovery 161T Package c/w 8mtr Tig Torch,
4mtr Earth/Arc Set and regulator - $1695.00
Helvi Uni-Mig Series Mig Welders
Helvi, one of Italy’s premier welding machine manufacturers offers up for
your welding pleasure the Uni-Mig range. Available from 320 amps to 520
amps, these industrial mig welders offer you thousands of hours of hard
graft. Stepless wire feed, 21 – 36 voltage steps, burn back adjustment, 4
roller wire feeder as standard and the option of either 5 or 10mtr connection
cable sets. All come with Lightning 4.5mtr Mig Torch and Regulator.
Helvi Uni-Mig 418 10mtr Package for $4595.00
Note: All prices exclude GST and a freight charge may apply.
A full range of welding consumables available including;
 Kiswel and ESAB Electrodes and Flux cored wires
 A comprehensive range of Mig and Tig torch spares including Tigmaster
 Optrel Automatic welding helmets and lenses
 Chemtools Cold Galv Spray Cans and CJT Anti Spatter in 500g, 5ltr and 20ltr Bulk
 Extensive range of Health and Safety Products to cover from head to toe.
Phone (06) 213-9373. Cell (027) 323-7958. Fax (06) 323-7958.
Email [email protected]. Website www.hwcs.co.nz