XFTP SAT SCAN Satellite Meter

XFTP SAT SCAN
Satellite Meter
● Displays Dish Orientation (Az, El, Po)
● Supports DVB-S and DVB-S2 Signals
● Simultaneous Display of Signal Strength and
Signal Quality
● QPSK and 8PSK Signal Level, C/N, BER, CBER,
and VBER Measurements
● C and Ku Bands
● More Than Two Hours of LNB Power
● Full Spectrum View
● Auto-Satellite Identification
Overview
The XFTP SAT SCAN ™ satellite meter allows for a fast
and simple satellite dish installation and alignment
process. This meter is an excellent choice for installers
and contractors to be provided with self-calculated
azimuth, elevation, and polarization for initial dish
setup, signal level and quality tuning. The meter
supports both DVB-S2 and DVB-S signals. Support
for H.264, MPEG-4 and MPEG-2 video formats is also
provided and is displayed on a full color LCD screen. It
also measures digital satellite QPSK, 8PSK signal levels,
BER, CBER, VBER and C/N to quickly determine the
quality of a signal.
The XFTP SAT SCAN uses simple bar graphs and audio
tones to provide the necessary tools for fine-tuning
the dish position. Power is also provided to the LNB for
dish setup without a receiver or TV connected. With
the Easyfinder feature, even the most novice user can
perform a satellite dish installation.
A list of the most commonly used satellites in North
America comes pre-configured with the XFTP SAT
SCAN. It also allows storage of up to 80 satellite
configurations, 40 measurement records, and 10
Spectrums.
XFTP by TRILITHIC
9710 Park Davis Drive
Indianapolis, IN 46235
Many more satellite configurations from around the
world can be downloaded via the meter’s companion
software. Custom configurations can also be easily
created.
With its light weight, this simple to setup and operate
satellite meter will provide you with hours of operation
time. The complete XFTP SAT SCAN package includes a
carry bag, strap, charger, software, data cable, and an
operation manual.
P:800-344-2412
317-895-3600
F:317-895-3613
E:[email protected]
www.fieldtechproducts.com
XFTP
Specifications
Frequency Range
950 to 2150 MHz
Signal Level Range
-65 dBm to -2 dBm
RF Input Connector
Replaceable F-type
INCLUDES THE FOLLOWING:
Carry bag
Shoulder strap
USB data cable
AC battery charger
Nickel-metal hydride battery
Input Resistance
75 Ω
User’s manual
Measurements
DVB-S2, DVB-S,QPSK, 8PSK signal level, bit
error rate (BER), CBER, VBER, carrier-to-noise
(C/N) ratio
ACCESSORIES:
Storage
40 measurement records
80 satellite configuration files
10 Spectrums
LNB Power Supply
Horizontal polarization/LHCP:
+18 V, ≤750 mA
Vertical polarization/RHCP:
+13 V, ≤750 mA
PC Connection
USB
Switch
22 KHz
DiSEqC Switching
8 way
DiSEqC Motor Control
1.0/1.2/USALS
Power
Total power: 8 W
(DC8.4 V Rechargeable Battery)
Provides 3-4 hours of continuous operation (2
hours with LNB power)
4 hour charge time
Operational Temperature
0° to 40° C (32° to 104° F)
Storage Temperature
-20° to +70° C (-4° to +150° F)
Display
128 x 64 Color LCD
Weight
3.5lbs (1.6 Kg)
Dimensions (H x W x D)
9.84” 4.72x” 2.36x”
(250mm x 120mm x 60mm)
I/O-15 precision RF coaxial test cable
P/N 2071527048
Copyright © 2011 Trilithic, Inc. All Rights Reserved. Specifications are subject to change without notice. Please contact your nearest distributor for further information. XFTP 05/11(Prelim)
XFTP by TRILITHIC
9710 Park Davis Drive
Indianapolis, IN 46235
P:800-344-2412
317-895-3600
F:317-895-3613
E:[email protected]
www.fieldtechproducts.com