Prices Good September 1 - November 30, 2014

Transcription

Prices Good September 1 - November 30, 2014
KIMBERLY • MILWAUKEE • MADISON • GREEN BAY • WAUSAU • LA CROSSE • ROCKFORD • IRON MOUNTAIN
HPX BOILER TRIM-OUT PACKAGES
Series HPX Boiler Trim-Out Packages
are for use on commercial and
residential closed loop hydronic
heating systems.
Packages include: an Air Scoop,
1/8 in. and 1/2 in. service check valve,
bronze combination fill valve and backflow preventer, 1/8 in. float vent and
ETX series expansion tank.
Item ID
DA58083
DA58253
Mfg. No.
HPX-C
HPX-D
Description
1 in. Air Scoop
1-1/4 in. Air Scoop
EARLY BUY SAVINGS
Place a single order totaling $750 from this flier by
October 15, 2014 and your price will be locked in on
the best pricing column until December 31, 2014.
Excludes all NTI, Weil-McLain, Triangle Tube, Crown Boiler,
Takagi, Space-Ray, Modine, and WeatherKing.
Price
$149.99 ea.
149.99 ea.
HP-30PRO PRO
HYDRONIC PACKAGES
The Pro Hydronic Packages
contain a Air Separator,
RBFF Service Fitting, ETX Series
Expansion tank, and B911S-M3
Fill Valve Assembly and Backflow
Preventer.
Item ID
Mfg. No.
Description
Price
DA95783 HP-30PRO-100 1 in. Air Separator $172.00 ea.
DA95785 HP-30PRO-125 1-1/4 in. Air Separator 172.00 ea.
77SI WYE-PATTERN THREADED STRAINERS
• Designed to protect system components from dirt, rust
and other damaging debris in the piping system.
Item ID
DA71770
DA61673
DA61675
DA61676
Size
3/4 in.
1 in.
1-1/4 in.
1-1/2 in.
Price
$12.90 ea.
15.99 ea.
31.68 ea.
38.29 ea.
AIR GAP
• For reduced pressure zone assemblies
Item ID
DA60137
Mfg. No.
909-AG-A
Price
$27.75 ea.
COMBINATION FILL VALVE AND BACKFLOW PREVENTER
• For use on boiler feed lines to provide make-up water to the
boiler and prevent backflow when supply pressure falls
below system pressure.
• High capacity fill valve for quick system
filling and purging.
• Pre-assembled for ease of installation.
Item ID
DA53084
Mfg. No.
911S
Size
1/2 in.
Price
$64.99 ea.
BACKFLOW PREVENTER
• Dual check valves with intermediate atmospheric vent.
• Prevents the reverse flow of hot or cold polluted
water from entering into the potable water supply.
Item ID
1081103
Mfg. No.
1/2BBFP
Size
1/2 in.
Price
$33.99 ea.
1/2 INCH WATER FEED
PRESSURE REGULATOR
• Designed to fill the boiler and system piping
with water and to maintain water pressure
in the system at all times.
• Threaded inlet connection.
Item ID
DA33053
Mfg. No.
1156F
Price
$33.99 ea.
BOILER SAFETY RELIEF VALVE
•
•
•
•
For pressure protection of hot water heating boilers.
3/4 in. female thread, 30 psi
Iron body with forged bronze inlet.
550,000 BTU/hr rating.
Item ID
1081403
Mfg. No.
374A
Price
$32.49 ea.
Design Air, a division of U.S. Venture, Inc. • Prices effective September 1, 2014 thru November 31, 2014 only and subject to change without notice.
Prices are subject to change without notice
PROGRAM DETAILS: Only purchases invoiced during
September, October, and November 2014 will be eligible
to receive a FREE Jacket(s) and Gift Card(s). NTI
TRINITY TFT BOILER AND B&G PUMP MUST BE ON
THE SAME ORDER. No jacket or gift card substitutions
will be made. Customers will be notified after the
promotional period to obtain Jacket sizes. Sizes available:
Medium, Large, Extra Large, XXL, and XXXL. Jacket(s)
and Gift Card(s) will be delivered within 4-6 weeks after
the promotion ends. Special discounts and other
promotions may not apply.
Call for pricing on NTI Boilers and Water Heaters!
NTI - TRINITY TFT FIRE TUBE HIGH EFFICIENCY CONDENSING BOILER
• Easy to install and maintain.
• Down-fired, Fire Tube stainless
steel boiler.
• Top and bottom supply/return piping
made from robust stainless steel.
• Certified internal low water cut-off
with test button.
• Fully-modulating combustion system.
• Condensate pump receptacle.
• Built-in gas drip leg.
• Wall-mount configuration with optional
floor stand.
• Top vent/air inlet connections with test
port.
• On/off power service switch.
• High quality metallic clear coat finish.
• High-energy spark ignition
(with external spark generator).
NTI - TRINITY TX HIGH EFFICIENCY CONDENSING BOILER
• Built and certified as a heating boiler.
• Pre-wired for use with indirect water
heater.
• High efficiency stainless steel boiler.
• All components are quick release type.
• Easy wire connection strip.
• Fully packaged and wired assembly.
• Auto air vent.
• Three pump outputs.
• 120V power receptacle.
Control Features:
- Full automatic modulation.
- Outdoor reset.
- Lead-Lag compatible.
- Low pressure cutoff.
- Easy programmable display.
- OD reset boost feature.
- Warm weather shutdown (WWSD).
- Compatible with indirect tank sensor.
- Diagnostic Logging.
NTI - TRINITY LX HIGH EFFICIENCY GAS BOILER OR WATER HEATER
•
•
•
•
•
•
•
•
•
Touch screen LCD color display.
Ultimate controllability.
All info. is displayed & monitored.
High quality appliance finish.
Floor or wall mount configuration.
Improved venting orientation.
For use with Indirect Water Heater.
316L stainless steel heat exchanger.
Fully packaged and wired assembly.
NTI - TRIN & STOR WATER HEATER
• Built with 100% high-quality s/s to
provide years of uncompromising
performance.
• Ample storage and superior recovery.
• Limited Lifetime Warranty.
• Adjustable aquastat.
2
•
•
•
•
ASME certified boiler.
Certified ANSI Z21.13.
15 year limited warranty.
Up to 95% AFUE.
• Up to 94% AFUE.
Boiler kit package includes:
- Outdoor sensor.
- Vent pipe screens.
- Condensate drain kit.
- Pressure gauge.
- Relief valve.
•
•
•
•
•
•
Fully modulating combustion system.
Electronic controller.
Propane conversion kit.
Auto air vent.
Outdoor reset control.
Bottle of Boiler Water
Treatment / Inhibiter.
• ASME H stamped.
• Certified ANSI Z21.13
• Up to 94% AFUE.
LX kit package includes:
- Outdoor sensor.
- Vent pipe screens.
- Wall mounting kit.
- Pressure gauge.
- Relief valve.
• Composite outer shell,
eliminates dents.
• Easy access cleanout.
• Full range of sizes and applications.
• Special quick recovery coil.
• Designed to work with all NTI boilers.
Package includes:
- Aquastat
- Relief Valve
KIMBERLY 800-444-0101 • MILWAUKEE 800-569-3389 • MADISON 888-535-5595 • GREEN BAY 800-444-1798 • WAUSAU 888-363-4779
Call for pricing on Weil-McLain Boilers and Water Heaters!
WEIL-McLAIN — GV90+ GAS BOILER
• 91% AFUE efficient.
• Durable cast iron primary heat
exchanger.
• Condensing stainless steel secondary
heat exchanger.
• Unique 7 pass heat exchanger design
maximizes heat transfer.
• Vents with PVC.
• Multiple venting options (direct vent,
direct exhaust, concentric).
• Easy conversion to propane
(kit included).
WEIL-McLAIN — WM97+ CT WALL MOUNT GAS BOILER
• 70,000; 110,000 & 155,000 BTU input
models at 95% AFUE.
• Stylish, compact wall mount design
for easy installation, service and
maintenance.
• Unique condensing stainless steel fire
tube heat exchanger design.
• Built-in boiler circulator.
• Built-in primary/secondary piping
option.
• Pre-wired terminal strip for quick and
easy electrical connections.
• Convenient indirect-fired water heater
connection.
• Capable to vent with PVC, PP and
SS up to 100 ft.
• Multi-color LCD display with text
- no codes.
• CT - Condensing Technology
- 5 to 1 turndown ratio.
• Aqua Logic indirect fired water
heater compatible.
WEIL-McLAIN — ECO WALL MOUNT GAS BOILER
• Class-leading 70,000, 110,000, and
155,000 BTUH models.
• Exceeds Energy Star requirements at
95% AFUE efficiency rating.
• Durable stainless steel fire tube heat
exchanger.
• Streamlined design configurable for
installation.
• Display can be mounted on the boiler
or wall (up to 2 ft. away).
• Components positioned for fast and
easy service.
• Multiple vent configurations and
material options.
• Large LCD display makes set up and
navigation simple.
WEIL-McLAIN — ULTRA SERIES 3-CT GAS BOILER
• Gas fired water boiler with cast
aluminum heat exchanger.
• Venturi mixing body mixes air and gas
providing higher efficiency.
• Designed to operate in low
temperature condensing applications.
• Outdoor reset and domestic hot water
priority standard.
• Negative regulated gas valve
precisely delivers gas to the boiler.
• U-Control gives you the power for
easy set-up and maintenance.
• Modulates with 5 to 1 turn-down
ratio capability.
• Variable speed motor matches
combustion output to heating needs.
• High grade stainless steel burner
features quiet operation, high
efficiency, and cleaner combustion
for low NOx applications.
• Up to 94% AFUE.
WEIL-McLAIN — CGa SERIES 2 GAS BOILER
• Compact design saves valuable
living space.
• Stainless steel burners for quieter
ignition, longer life, and improved
combustion.
• Gas fired water boiler with cast iron
sections.
• Easily accessible controls, vertical
flueways and top cleaning for easy
and quick servicing.
• Up to 84% AFUE.
WEIL-McLAIN — CGi SERIES 3 GAS BOILER
• Gas fired water boiler with cast iron
sections.
• Natural draft and direct exhaust
capability.
• Can be used with natural or
propane gas.
• All units are factory-tested.
• Compact design saves valuable
living space.
• No vertical draft hood and no
mechanical vent damper.
• Intermittent electronic ignition
with standard components for
easy servicing.
• Up to 85% AFUE.
ROCKFORD 800-462-1541 • IRON MOUNTAIN 800-490-4904 • www.designair.com • http://buynow.designair.com
3
Call for pricing on Triangle Tube Boilers!
TRIANGLE TUBE PRESTIGE SOLO SERIES
— CONDENSING HIGH EFFICIENCY WALL MOUNTED GAS BOILER
•
•
•
•
•
•
•
95% A.F.U.E.
Limited 10 year warranty.
Stainless steel heat exchanger.
Outdoor temperature sensor.
Stainless steel burner.
Negative pressure regulated gas valve.
30 psi pressure relief valve.
• Flanged Grundfos 3-speed UP15-58
system circulator (110 only).
• Automatic air vent.
• Pressure gauge.
• Condensate drain assembly.
• 24 V terminal strip with removable
jumpers for manual reset or automatic
reset of external controls.
TRIANGLE TUBE PRESTIGE EXCELLENCE SERIES
— HIGH EFFICIENCY CONDENSING WALL MOUNTED GAS BOILER
WITH A BUILT-IN “TANK-IN-TANK” INDIRECT FIRED WATER HEATER
• 95% A.F.U.E.
• Abundant domestic hot water with
standard mixing valve.
• Highest water content in the industry.
• Ideal for small zones without
short cycling.
• Self cleaning / Self descaling.
• Condensate washes combustion
residue away when streaming down the
tubes resulting in a constant efficiency
and reduced maintenance.
Quiet operation.
Fully modulating.
Built-in exclusive “Tank-in-Tank”.
Unparalleled resistance to corrosion.
Less sensitive to water flow.
Vertical Firetube design.
439 grade stainless steel
heat exchanger.
• Impervious to chloride cracking.
•
•
•
•
•
•
•
• NTC temperature sensor on the boiler
supply/return and flue.
• 120 V Power switch.
• Stable temperature control.
• Low pressure drop.
• Condensate washes combustion
residue away.
• Control panel with digital display.
• Standard outdoor reset.
• Digital display.
• Direct vent / Sealed
combustion.
TRIANGLE TUBE CHALLENGER SOLO BOILER
High Efficiency Space Heating in a Compact Package
• Energy efficient with up to 90% AFUE.
• Twin pipe (PVC, CPVC, PP, or
• Dual material heat exchanger with
AL29-4C) or Concentric venting.
glycol compatible copper waterways.
• Compact size for closet installation.
• Advanced control with near 4:1
• Whisper-quiet operation.
modulation and standard outdoor reset. • EZ-Install piping bracket.
TRIANGLE TUBE SMART INDIRECT FIRED WATER HEATERS
• Designed to maximize efficiency and
reliability.
• It’s exclusive tank-in-tank design
rapidly heats the incoming water,
producing hot water quickly and reliably
using heat already produced by your
high efficiency boiler.
4
• With 2" of insulation completely
surrounding the tank, heat loss is
minimized to less than ½º F. / hour.
• Stainless steel inner tank expands and
contracts to virtually eliminate scale
build-up.
• Optional Timesaver primary
secondary piping with or
without pump.
• Lifetime guarantee.
• Limited lifetime
residential warranty.
Call for pricing on Crown Boilers and Water Heaters!
CROWN BOILER ARUBA 4 — GAS-FIRED HOT WATER BOILER
Designed for reliability, efficiency and performance. For residential and small commercial applications with approved chimney.
• Aquastat mounted directly into heat
• Can be used with the Mega-Stor
• Cast iron heat exchanger.
exchanger for improved response
indirect water heater for domestic hot
• Boiler easily field convertible to
• Stack Damper; Rollout Switch;
water production.
left side piping.
Blocked Vent Switch;
• Designed for installation on
• Built-in rear draft diverter to fit low
ASME relief valve (30 PSI)
combustible floors.
spaces.
• Stainless steel burners
• Limited lifetime warranty.
• Controls located inside the jacket and
• Available with natural or LP gas
easily accessible from front of boiler.
• Honeywell Intermittent Ignition System
• Eight sizes from 38,000 to
280,000 BTU.
CROWN BOILER BALI — GAS-FIRED HOT WATER BOILER
Through-the-wall venting for homes without chimneys or where the chimney cannot be used.
• Combo pressure/temperature gauge.
• Integral fan for side-wall venting.
BWF Standard Equipment
• Intermittent electronic ignition
• Reliable Honeywell controls.
- Packaged Boiler
pilot assembly.
• Powder-coated jacket.
• Complete factory assembled.
• Limited 20 year warranty.
• High performance circulator.
• Pre-wired and crated.
• Circulator isolation flanges.
• Deluxe baked enamel steel jacket.
• Temp./pressure gauge.
• Combo limit and relay (L8148E).
• Drain valve.
• 1-1/4 inch circulator with
• Six sizes serve most homes.
isolating flanges.
CROWN BOILER CABO 2 — GAS-FIRED DIRECT VENT HOT WATER BOILER
Ideal for today’s homeowners looking for a more energy efficient boiler.
• Combo Pressure /Temp. Gauge.
• Completely factory assembled,
• Cast iron heat exchanger.•
pre-wired and crated.
• Deluxe steel jacket with two-tone
Advanced control system with integral
textured finish.
priority for domestic hot water zoning.
• Honeywell L4080D High Limit Control.
• TACO #007 Circulator with Isolation
• Pressure differential switch for proving
Flanges.
air flow.
• 3/4 inch boiler Drain valve.
• Universal cent system adapter.
• A.S.M.E. relief valve (30 psi).
• LEDs for basic system diagnosis.
• Built-in non-combustible base.
• 3 inch Vent Collar
(CWD-060 – CWD-138).
• 3 and 4 inch Vent Collar
(CWD-165 – CWD-220).
• 4 inch Vent Collar (CWD-245).
• Complete Install. Instruction Manual.
• Eight sizes up to 245,000 BU input.
CROWN BOILER BERMUDA — GAS-FIRED STEAM BOILER
With an approved chimney, the Bermuda efficiently services single family homes, multi-family residences and small businesses.
• Ten sizes from
• Powder-coated jacket.
• Cast iron heat exchanger with a
69,000-379,000 BTU input.
• Fiber-glass insulation to minimize
12-year limited warranty.
wasteful heat loss.
• Stainless steel burners with lifetime
• Automatic vent damper.
limited warranty.
• Base and flue constructed of
• Tappings permit installation of
aluminized steel for corrosion
Mega-Stor indirect water heater.
resistance.
• Isolation relay simplifies
• Drain valve.
thermostat wiring.
• Built-in draft divert
• Electronic ignition.
CROWN MEGA-STOR INDIRECT WATER HEATER
Abundant domestic hot water powered by the same efficient boiler
that heats your home or commercial building.
• Lifetime limited warranty.
CROWN Boiler Co. warrants the
Mega-Stor’s stainless steel tank and coil
against leakage for as long as the original
purchaser owns the home in which it is
installed. Consult warranty for important
terms and conditions.
• Abundant domestic hot water.
• Heated by your high efficiency
home boiler.
• 316L stainless steel tank.
• Convenient access cap for
easy service.
• Honeywell adjustable temp. control.
5
TAKAGI TANKLESS WATER HEATERS
•
•
•
•
•
•
Fully modulating, gas fired, tankless, on demand water heater.
Supplies hot water to: domestic hot water systems and/or combined domestic and heating applications, etc.
T-KJR2-IN dimensions: 20.3" H. x 13.8" W. x 6.7" D.
T-K4-IN dimensions: 20.3" H. x 13.8" W. x 8.5" D.
T-D2-IN dimensions: 20.3" H. x 13.8" W. x 8.5" D.
Specify type of gas.
Item ID
DA93874
DA93875
DA93878
Input
Input
Max.
Maximum Minimum Flow Rating
Mfg. No.
(BTU/H)
(BTU/H)
T-KJR2-IN 140,000
19,500
T-K4-IN
190,000
11,000
T-D2-IN
199,000
11,000
Energy
(GPM)
6.6
8
10
Flue
Factor
.82
.82
.82
Vent
4 in O.D.
4 in O.D.
4 in O.D.
Price
$499.00 ea.
699.00 ea.
899.00 ea.
TAKAGI T-H3 — HIGH EFFICIENCY TANKLESS WATER HEATER
•
•
•
•
•
•
•
Perfect for residential and light commercial applications.
Can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.
DV (Indoor only).
Easy-link 4 units with no additional parts or accessories needed
Dimensions: 22-1/2" H. x 17-3/4" W. x 10-3/4" D.
Vents with Sch. 40 PVC pipe.
Specify type of gas.
Item ID
DA99757
Input
Input
Hot/Cold
Maximum Minimum Flow Rating Thermal
Gas
Mfg. No.
(BTU/H)
(BTU/H)
Max. (GPM) Efficiency Connection
Price
T-H3-DV-N 199,000
15,000
10.0
95 %
3/4 in. NPT $1,029.00 ea.
4 INCH Z-VENT WALL HUNG WATER HEATER
VENT KIT WITH BACK FLOW PREVENTER
• For use with wall hung and tankless water heaters.
Kit includes:
1 - Termination hood
1 - 4 in. x 90˚ elbow
Quick and easy
1 - 4 in. x 1 ft. pipe
installation!
1 - 4 in. x 1.5 ft. pipe
1 - Wall thimble
1 - Universal appliance adapter
with back flow preventer.
Item ID
DA72960
Mfg. No.
2ZVWB04
• Lead-free.
Kit includes:
1 - Hot valve,
1 - Cold valve,
1 - Pressure relief valve.
Price
$58.75 ea.
AF-480 AUTO-FILL WITH BACKFLOW PREVENTER & GAUGE
The AF-480 unit provides automatic filling from potable pressurized systems to
low pressure hydronic systems while providing safe isolation from potable
systems via the built-in dual check with atmospheric vent.
• Built-In system pressure gauge.
• Preset to 12 psi.
• ASSE dual check with
atmospheric vent.
• Adjustable from 7 to 45 psi.
Item ID
DA95206
6
Mfg. No.
800-841
• Works with tankless water heaters that provide 3/4 inch hot and
cold service connections.
• NSF approved and safe
to dispose of in drains.
Kit Includes:
1 — 3.5 gallon bucket,
1 — 350 gph pump,
2 — 5 ft. rubber hoses,
1 — 1 qt. Flow-Aide.
Item ID
DA89371
DA89372
Price
$156.00 ea.
3/4 INCH TANKLESS WATER HEATER INSTALLATION KIT
Item ID
Mfg. No.
DA102634 44443WPR
FLOW-AIDE SYSTEM DESCALER KIT
Price
$84.99 ea.
Mfg. No.
FLOW-KIT
FLOW32
Description
Price
Kit
$128.00 ea.
Quart only
11.99 ea.
LOW WATER CUT-OFF
•
•
•
•
•
Reliable electronic operation.
Low maintenance.
Easy to install.
120V.
Auto reset.
Item ID
DA17169
Mfg. No.
170
Price
$74.99 ea.
AUTOMATIC WATER FEEDERS
FOR STEAM BOILERS
The Hydrolevel VXT steam boiler water
feeder offers the homeowner the convenience
of maintaining a safe water line in the boiler —
automatically.
Item ID
DA63889
DA17170
Mfg. No.
VXT-24
VXT-120
Description
24V
120V
Price
$176.49 ea.
176.49 ea.
“HTX & SXHT” SERIES HYDRONIC EXPANSION TANKS
The HTX Series
• Welded steel dome construction.
• Diaphragms constructed of 100% butyl rubber, offer low permeability rates at
higher temperatures.
• Oversized diaphragm maximizes tank drawdown, and minimizes wear.
Item ID
1007015
1007030
1007060
DA55506
DA54909
Mfg. No.
HTX15
HTX30
HTX60
SXHT30
SXHT40
Maximum
Capacity Acceptance
System
Gallons
Volume
Connection
2.1
1
1/2 inch MNPT
4.5
2.5
1/2 inch MNPT
6
3
1/2 inch MNPT
15
6
1 inch FNPT
20
8
1 inch FNPT
The SXHT Series
• Designed for larger systems.
• Welded system connection.
• Double diaphragm design.
• Constructed of 100% butyl rubber.
Dimensions
(inches)
D x H x W (lbs)
8 x 12.5 x 5.5
11 x 14 x 10
11.4 x 17.2 x 11.5
16 x 21.7 x 32
16 x 28.8 x 39
Max. Working Pressure: 100 PSI • Factory Pre-charge: 12 PSI • Max. Working Temperature: 220˚ F.
FILL-TROL® EXPANSION TANKS WITH WATER FEED
• Pre-charged to 12 psig.
• Maximum working pressure: 100 psig.
Item ID
DA384
DA387
Mfg. No.
FT-109
FT-110
Price
$57.29 ea.
66.19 ea.
1/8 INCH FLOAT AIR VENT
• 2 in. D. x 3-5/8 in. H.
• Maximum pressure 150 psi.
• Maximum temperature 230° F.
Item ID
DA390
Mfg. No.
#700
Easy Installation!
Price
$26.49 ea.
31.29 ea.
73.89 ea.
138.50 ea.
148.15 ea.
EXTROL® EXPANSION TANKS
• A residential hydronic expansion tank that helps reduce
energy consumption in heating and chilled water systems.
• Pre-charge to 12 psig.
• Maximum working pressure: 100 psig.
• Maximum operating temperature: 240° F.
• Watertight reservoir for expanded water.
• Thick, heavy duty Butyl/EPDM diaphragm for long service life.
• Sealed air cushion — factory pre-charged and 100% tested.
• Projection-welded air stem maintains precharge setting.
• Made in the USA.
Item ID
DA380
DA381
Price
$6.39 ea.
AQUAPUMP™ — 3-SPEED HYDRONIC CIRCULATOR PUMP
Mfg. No.
EX-15
EX-30
Price
$28.71 ea.
34.99 ea.
3-Speed, 15 gpm
Item ID 1090000
The AquaPUMP eliminates the guesswork in the boiler room. With three sizes, multiple speeds
Mfg. No. PC3F1558IUF00
for each size and the unique Twist-To-Fit flange. And because a single AquaPUMP can replace
a wide range of competitive models, you can handle nearly all retrofits with just one brand.
$71.00 ea.
The PC3F in-line, wet rotor circulator with universal 4-bolt
3-Speed, 25 gpm
flange is designed for applications in closed-loop hydronic
Item ID 1090010
heating and cooling systems, as well as in solar-powered
systems. The pump is non-submersible and for use in dry,
$208.00 ea.
frost-free, well-ventilated installations.
• Twist-to-Fit universal 4-bolt flange - rotates 90˚
to fit every application.
• Threaded conduit connection - quick hookups.
• Stainless steel plate and can - durability.
3-Speed, 45 gpm
• Ceramic bearings and shaft - high corrosion resistance, long life.
Item ID 1090015
• Check valve included.
• 5-year warranty.
$259.00 ea.
Cross Reference for Pump Replacement
Mfg. No.
Grundfos
PC3F1558IUF00 UPS1558FC
UPS1558FRC
UP15-42F
Taco
007F-IFC
008F-IFC
00R-IFC
00R-IFC 3 sp
PC3F2699IUF00 UPS2699FC spd 3 0011F
UP26-96F
0011F-IFC
0013F
0013F-IFC
0014F
0014F-IFC
PC3F4344IUF00 PS4344FC spd
0010F
UP43-75F
0012F
Bell & Gossett
NRF-22
When purchasing any of the Honeywell pumps above,
you will receive cool Honeywell stuff for every 3rd pump
purchased from August 1 - November 30, 2014
+
Plus an entry into the
Atlanta Falcons vs.Green Bay Packers,
Monday, December 8th game drawing!
PR
PL36
PR B1
Purchases invoiced during each month will receive the Honeywell
giveaway item advertised for that month. Giveaway items will be
distributed after each month. The NFL Ticket drawing will be held on
Monday, November 17, 2014. Qualifying invoices dated on or before
Friday, November 14, 2014 will be entered in the drawing. Winners
will be notified via Design Air Business Consultant.
7
CARTRIDGE CIRCULATOR PUMPS
SWITCHING RELAY
• Standard high capacity output.
• Direct Drive - Low power consumption.
• Self lubricating.
Quiet, efficient
• No mechanical seal.
operation!
• Unique replaceable cartridge
design - Field serviceable.
• Unmatched reliability - maintenance free.
Item ID
1052025
1052005
Mfg. No.
007-ZF-5-9
007-F7-IFC
Description
Price
Zoning Circulator
154.29 ea.
1/25 HP, Integral Flow Check 75.99 ea.
• 1/8 HP.
• Cast Iron, flanged.
Item ID
1052046
1052048
Mfg. No.
0010-F3
0011-F4
Description
Medium head
High head
Make the switch!
• Compatible with conventional and
programmable thermostats.
• PC board easily replaces other single zone
switching relays, without replacing the entire box.
• Fully enclosed snap-out relays.
• External indicator lights.
• Fuse protected.
• 24V power input or output terminal.
Item ID
1052300
1052310
DA42969
Item ID
DA69254
DA69258
DA69260
Price
$127.69 ea.
179.99 ea.
Mfg. No.
Description
007-MSF1-IFC
Radiant pump
0015-MSF2-IFC
High head radiant pump
0010-MSF1-IFC Medium head Service pump
Item ID
1051329
1051331
Price
$85.49 ea.
79.99 ea.
238.49 ea.
Item ID
1007120
Mfg. No.
400-4
AIR VENT
Size
3/4 in.
1 in.
1-1/4 in.
Price
$8.71 ea.
8.71 ea.
8.71 ea.
Price
$8.59 ea.
Item ID
DA68771
Mfg. No.
49-075
49-100
49-125
49-150T
Size
3/4 in.
1 in.
1-1/4 in.
1-1/2 in.
Price
$70.99 ea.
78.99 ea.
109.98 ea.
139.99 ea.
Mfg. No.
431-8
432-8
Size
1 in.
1-1/4 in.
Price
$18.21 ea.
18.21 ea.
8
Mfg. No.
Z075C2-1
Size
3/4 in.
Mfg. No.
5003-C3
5004-C3
Size
3/4 in.
1 in.
Price
$71.99 ea.
83.99 ea.
Mfg. No.
3196-1
Size
3/4 in.
Price
$49.99 ea.
Item ID
1052200
1052210
Mfg. No.
218-3
220-6
Size
3/4 in.
1 in.
Price
$30.19 ea.
31.39 ea.
• 120V.
ZONE SENTRY ZONE VALVE
Item ID
1052250
Price
$29.64 ea.
34.61 ea.
39.99 ea.
LOW WATER CUTOFF
AIR SCOOP
Item ID
1052160
1052170
Size
3/4 in.
1 in.
1-1/4 in.
FLO-CONTROLS
AIR SEPARATOR
Item ID
DA67775
DA67776
DA67777
DA67778
Mfg. No.
SF-075S
SF-100S
SF-125S
DIFFERENTIAL BYPASS VALVE
CAST IRON FLANGE
Mfg. No.
110-251F
110-252F
110-253F
Price
$49.39 ea.
155.79 ea.
220.79 ea.
MIXING VALVES
• 3-Speed.
• Cast Iron, flanged.
• With built-in Integral Flow Check.
Item ID
1052125
1052153
1052166
Description
Single Zone
4 Zone
6 Zone
SHUT-OFF FREEDOM FLANGE SET
WITH ROTATING FLANGE
Item ID
DA92369
1051990
DA83104
Mfg. No.
SR501-4
SR504-EXP4
SR506-EXP
Price
$81.93 ea.
Item ID
Mfg. No.
DA59495 LTA1203S-2
Price
$66.51 ea.
THE TACO BUMBLE BEE® VARIABLE SPEED CIRCULATOR
•
•
•
•
•
•
•
•
High efficiency ECM Motor - reduces power consumption by up to 85%.
LED displays real-time mode - watt usage and GPM flow.
360˚ swivel flange - nut capture feature on flanges.
Three modes of operation in a single pump:
Delta T - Setpoint - 4 Speeds.
Fully programmable.
Integral Filter to block black iron oxide.
Plug-in remote sensors.
Integral Flow Check
(shipped loose).
Item ID
DA99138
Mfg. No.
HEC-2
Price
$163.86 ea.
POWER PACK MOTOR
WET ROTOR CIRCULATOR PUMPS
• 100 Series 1/12 HP
replacement motor.
Item ID
DA46471
Mfg. No.
111034
•
•
•
•
Price
$232.50 ea.
SEAL BEARING ASSEMBLY
WITH IMPELLER
Item ID
DA40339
DA87860
DA72356
DA72585
• 1/12 HP.
Item ID
DA61333
Mfg. No.
189134LF
Price
$92.25 ea.
Price
$18.38 ea.
25.13 ea.
Item ID
DA97952
DA96313
Mfg. No.
553542A
Size
1/2 in.
Price
$47.61 ea.
Mfg. No.
573403A
Size
1/2 in.
Price
$37.19 ea.
Mfg. No.
573002A
Size
1/2 in.
Price
$79.99 ea.
INVERTED FLARE ZONE VALVE
WITH END SWITCH & FITTINGS
Item ID
DA62871
Mfg. No.
Z40F
Size
3/4 in.
Price
$70.99 ea.
THERMOSTATIC 3-WAY
MIXING VALVES
Item ID
DA66020
DA66021
Mfg. No.
521509A
521609A
Size
3/4 in.
1 in.
Item ID
DA2927
Mfg. No.
118705
Item ID
DA63359
DA63360
DA63361
Mfg. No.
101226LF
101227LF
101228LF
Price
$14.99 ea.
Description
3/4 in., 2-pack
1 in., 2-pack
1-1/4 in., 2-pack
Price
$33.99 ea.
39.49 ea.
55.79 ea.
SWEAT CHECK-TROL™ ISOLATION
FLOW CONTROL FLANGES
BACKFLOW PREVENTER
AND AUTOFILL VALVE
COMBINATION
Item ID
DA66024
• Cast iron.
• 1/12 and 1/16 HP boosters.
SWEAT PUMP
ISOLATION FLANGES
BACKFLOW PREVENTER
Item ID
DA66024
Mfg. No. Description
Price
6050B2000 Ecocirc Auto $161.99 ea.
6050B2001 Ecocirc Vario 148.99 ea.
COUPLER
AUTOFILL BOILER FEED VALVE
Item ID
DA66023
Description
Price
1-speed, 115V, 1/25 HP
$71.99 ea.
3-speed, 115V / 60 HZ
83.99 ea.
3-speed, 115V, 1-phase, 1/6 HP 167.99 ea.
3-speed, 115V, 1/6 HP
289.99 ea.
• Ecocirc Auto Pump has a proportional pressure control which automatically adjusts the pump performance continuously and
automatically to the requirements of the heating system.
• Ecocirc Vario Pump allows for step-less speed control to
set the pump performance to meet individual
system requirements.
• Electrical supply: 115V, 60 Hertz.
• Temperature range: 40˚ F.
(non-freezing) to 203˚ F.
• Power consumption: 5 - 60 Watts.
• Mfg. No. 118223 fits: 1/12 and
1/6 HP booster.
• Mfg. No. 118228 fits: PD-35,
PD-37, LD3, HD2, 1-1/2 inch
and 60 Series.
Mfg. No.
118223
118228
Mfg. No.
NRF22
NRF25
NRF36
NRF45
ECOCIRC® CIRCULATOR PUMPS
MOTOR MOUNT SETS
Item ID
DA39077
DA57759
Cast iron.
UL and cUL Listed.
Max. Working Pressure: 150 psi.
Max. Operating Temp.: 225˚ F.
Price
$77.99 ea.
92.89 ea.
Item ID
DA65142
DA65144
DA65145
Mfg. No.
101236LF
101237LF
101238LF
Description
Price
3/4 in., 2-pack $39.49 pk.
1 in., 2-pack
49.99 pk.
1-1/4 in., 2-pack 66.69 pk.
PRESSURE
REDUCING VALVE
Item ID
1011000
Mfg. No.
FB38
Size
1/2 in.
Price
$39.99 ea.
ENHANCED AIR SEPARATORS
Item ID
Mfg. No.
DA62944 EASB-3/4
DA62945
EASB-1
DA62950 EASB-11/4
DA62951 EASB-11/2
DA63284 EASB-3/4S
DA66664
EASB-1S
DA66393 EASB-11/4S
Description
3/4 in. threaded
1 in. threaded
1-1/4 in. threaded
1-1/2 in. threaded
3/4 in. sweat
1 in. sweat
1-1/4 in. sweat
Price
$79.99 ea.
85.99 ea.
128.49 ea.
148.49 ea.
79.99 ea.
85.69 ea.
128.49 ea.
9
PROTECTOR F1
SUPERVENT® AIR ELIMINATOR
• Central Heating Protector for mixed-metal
domestic central heating systems.
• Protects against corrosion and limescale.
• Prevents boiler noise.
• Stops frequent venting of radiators.
• Prevents cold spots in radiators.
• Saves on fuel bills.
• Non toxic, environmentally friendly.
Item ID
DA95024
DA93293
Mfg. No.
57880
59900
Description
Liquid
Aerosol
• Application: Residential or Commercial closed loop hydronic
heating or chilled water systems
• Purges air through a no clog vent assembly that controls dirt
and debris to minimize air vent fouling.
• 360˚ adjustable collar ring for installation flexibility.
• Stainless steel concentrator which eliminates gurgling noise.
• Bronze body for rigid construction.
Price
$23.99 ea.
21.39 ea.
CLEANER F3 LIQUID & F5 AEROSOL
• Neutral universal cleanser for
pre-commissioning new systems.
• Removes sludge and scale and restores
heating efficiency of existing systems.
• Removes flux residues and other debris.
• Compatible with all metals and materials
commonly used in heating systems.
• Neutral, non-hazard formula
(COSHH rated zero).
Item ID
DA95025
DA96294
Mfg. No.
57882
59902
Description
Liquid
Aerosol
Price
$24.19 ea.
22.29 ea.
• Ideal for reducing pressure loss from
sealed systems.
• Seals most weeps and small inaccessible leaks.
• Saves time and money on draining down
and repairing.
• Does not cause blockages of pump,
air vents etc.
• Compatible with all metals and materials
commonly used in central heating systems.
Mfg. No.
57883
59903
Description
Liquid
Aerosol
Price
$20.89 ea.
17.99 ea.
BOILER COMMISSIONING KIT
• Maintain the design specifications and
energy efficiency.
• Inhibit the formation of scale and sludge.
• Minimize corrosion of system metals.
Kit includes:
— (1) Pint of Protector F1
— (1) Pint of Cleaner F3
— (4) pH Test Strips
— (1) Protector Test Kit
— Instruction Leaflet.
Item ID
DA93742
Mfg. No.
59480
Price
$51.19 ea.
TF-1 FILTER WITH 1" FITTINGS
• Hydrocyclonic and magnetic in-line filter.
• Unique action, removes magnetic and
nonmagnetic contaminants.
• Fits vertical and horizontal pipe work.
• Dosing point for Fernox “F” range products.
• Cleaned in seconds without removal or disassembly.
• All valves and fittings included.
Item ID
DA95746
10
Mfg. No.
60003
Price
$199.99 ea.
Mfg. No.
PV075
PV075S
PV100
PV100S
PV125
PV125S
PV150
FREEZ-KONTR’L®
LEAK SEALER F4
Item ID
DA95995
DA97200
Item ID
1091000
1091100
1091010
1091110
1091015
1091115
1091020
Size
3/4 in.
3/4 in.
1 in.
1 in.
1-1/4 in.
1-1/4 in.
1-1/2 in.
CV Connection
13 Cv
NPT
13 Cv
Sweat
22 Cv
NPT
22 Cv
Sweat
38 Cv
NPT
38 Cv
Sweat
53 Cv
NPT
Price
$65.69 ea.
65.69 ea.
71.09 ea.
71.19 ea.
95.99 ea.
98.99 ea.
131.39 ea.
Inhibited propylene glycol heat transfer fluid and anti-freeze.
• Formulated for chilled water, hydronic and other closed systems.
• Optimum freeze or burst protection.
• Fully inhibited to prevent corrosion.
• Non-flammable and non-toxic.
Dilution Chart
Freeze
Burst
Freez-Kontr’l Protection Protection
50/50 Mix
+3˚ F.
-35˚ F.
Item ID
1857000
Mfg. No.
4188-05
Description
5 gallon pail
Price
$63.99 ea.
NOBURST® 100 HYDRONIC ANTI-FREEZE
• A non-toxic antifreeze and heat transfer fluid.
• Use wherever water and other water-like fluids are normally used.
• Excellent for all heating and cooling systems, especially
where freezing may cause damage or interfere with
the functioning of systems or equipment.
• For use in contact or potential contact with potable water.
NOTE: Price may change with market conditions.
Item ID
DA23061
DA23062
Mfg. No.
Description
NOBURST 1 1 gal. plastic bottle
NOBURST 5 5 gal. plastic pail
Price
$13.19 ea.
65.96 ea.
SEALMASTER™ BOILER LEAK SEALER
• Fills and seals holes, cracks and loose joints in steam boilers.
• Forms a cement-like water-tight plug.
• Unique corrosion inhibitor protects the boiler’s surface
from pitting, even after complete draining.
• Will not damage seals and gaskets.
Item ID
1832936
Mfg. No.
68722
Size
1 quart
Price
$11.19 ea.
8-WAY™ BOILER WATER TREATMENT
• A complete boiler water treatment for steam and hot water systems.
• Removes sludge, rust scale, inhibits boiler corrosion
and inhibits steam line corrosion, prevents oxygen pitting,
inhibits lime scale, prevents surging and foaming,
controls pH with color indicator.
Item ID
DA30996
DA30997
Mfg. No.
68712
68714
Size
1 quart
1 gallon
Price
$6.29 ea.
25.19 ea.
KIMBERLY 800-444-0101 • MILWAUKEE 800-569-3389 800-494-4259 800-677-0213 • MADISON 888-535-5595 800-677-0223 • GREEN BAY 800-444-1798 800-677-0233
ONIX™ RADIANT TUBING
• For underfloor radiant, cold weather installations,
and snowmelt.
• Onix is the fastest, friendliest, and safest radiant
heat tube you can specify or install.
• Installs with less labor than any other radiant tubing,
and takes jobsite abuse better than any other
radiant tubing, too.
Call for pricing!
RADIANT HEATING PEX TUBING
• The cross-linked molecular structure of RadiantPEX
offers toughness, flexibility and lasting durability.
• RadiantPEX is corrosion resistant and virtually
maintenance free.
• This pex tubing withstands temperatures ranging
from below freezing to above the boiling point.
Call for pricing!
RADIANTPEX-AL™
Cross-linked Polyethylene x Aluminum x Cross-linked Polyethylene.
• For hydronic radiant heating, snow-melting and hydronic piping.
• Lightweight, durable and can be
5 - layer construction.
shaped to fit any jobsite.
• Aluminum layer protects boiler
systems against corrosion.
• Superior temperature and
pressure ratings.
• Use RadiantPEX-AL as supply and
return piping to manifolds, fan coils,
baseboards and radiators.
Call for pricing!
CRIMPALL TOOL KIT
• Crimps 3/8, 1/2, 5/8, and 3/4 in.
CrimpRings.
• Tough plastic tool kit.
Kit includes: CrimpAll tool;
interchangeable 3/8, 1/2, 5/8,
and 3/4 in. crimping jaws;
Go/No-Go crimp gauge; and
adjustment tools.
1" STAINLESS STEEL PRECISION
MANIFOLDS WITH ADAPTOR
• Includes adaptor with automatic air vent
and fill & purge.
• Ships loosely assembled and ready to install.
Item ID
DA91826
DA91468
DA91467
DA91546
DA91827
DA91545
Mfg. No.
8300P-10-2
8300P-10-3
8300P-10-4
8300P-10-6
8300P-10-7
8300P-10-8
Description
2 Port
3 Port
4 Port
6 Port
7 Port
8 Port
Price
$147.62 ea.
171.73 ea.
196.26 ea.
245.87 ea
270.89 ea.
298.99 ea.
STAINLESS STEEL MANIFOLDS AND ACCESSORIES KIT
• 1 to 12 circuits.
• 1 inch and 1-1/2 inch trunks.
• 4-wire actuator for individual
circuit control.
• Mounts in a 2 x 4 wall.
• Easy to add extra circuits.
• Bring supply/return in from either end.
— Seamless, one-piece construction
— Already mounted on brackets.
— Easy to balance flow or find
air-locked circuits with flow meters.
— Easy to measure zone temperature drop.
Save time on
installation!
Call for pricing!
MALCO FOAMBOARD STAPLER
• For installing in-floor radiant heating systems.
• Ergonomic D-Grip Handle helps keep hands
in-line for applying downward pressure while
stapling and for carrying tool.
• Solid one-piece aluminum magazine stands up
to rugged job-site environment.
• Secures PEX Pipe 3/8, 1/2, 5/8, 3/4 inch to
1 inch or 2 inch foamboard insulation.
• Malco Foamboard Stapler and Staples
are compatible with most other
popular brands of foamboard
stapling systems.
Item ID
9540260
9540265
Mfg. No.
FBSN
FBSN2
Speeds
installation time!
Description
Malco Foamboard Stapler
200 Malco 2-1/2 in. Staples for
2 in. Foamboard
Price
$227.00 ea.
21.59 ea.
PEX FITTINGS
AND RINGS
Item ID
Mfg. No.
Price
DA62467 PCCRT2346 $158.99 ea.
3/4 INCH TERMINAL BEND SUPPORT
• For use with 1/2 inch pex tubing.
• Used near the completion of PEX circuits to help the tubing make
smooth transitions out of the slab and up to the manifolds.
Item ID
DA50658
Mfg. No.
PSB45X
Price
$1.73 ea.
Item ID
DA53380
Mfg. No.
643X3
DA50019
DA45130
PCCR3X
PCCR4X
DA54079
644X3
Description
3/4 in. MALE Sweat Adapter,
3/4 in. PEX
3/4 in. FEMALE Sweat Adapter,
3/4 in. PEX
1/2 in. PEX Crimp Ring
3/4 in. PEX Crimp Ring
Price
87¢ ea.
89¢ ea.
13¢ ea.
18¢ ea.
11
SPIROVENT AIR ELIMINATORS
•
•
•
•
•
Simple to install
For hydronic heating and chilled water installations.
with a straight
Recommended for radiant heat systems.
in-line design!
Eliminates noise.
Reduces circulator wear and minimizes sludge build-up.
Solid brass construction, integral patented air release mechanism.
Item ID
DA86737
DA17113
DA17090
DA36015
DA71016
DA71017
Mfg. No.
Description
VJR075TM 3/4 in. threaded
VJR100TM
1 in. threaded
VJR125TM 1-1/4 in. threaded
VJR150TM 1-1/2 in. threaded
VJS100TM
1 in. sweat
VJS125TM 1-1/4 in. sweat
Price
$76.99 ea.
78.39 ea.
108.43 ea.
153.99 ea.
78.39 ea.
108.43 ea.
THE ISOLATOR® UNI-FLANGE BALL VALVE
• Less leak paths, Teflon blowout proof stem and seats.
• Virtual elimination of galvanic corrosion.
Reduces component parts
and installation time!
Item ID
1058000
1058010
1058012
Mfg. No.
50403
50404
50405P
Description
3/4 in. swt
1 in. swt
1-1/4 in. swt
Price
$14.28 ea.
17.25 ea.
20.39 ea.
UNI-FLANGE BALL VALVES WITH PURGE DRAIN
•
•
•
•
Heavy duty forged brass construction.
Hi-Flow hose drain.
Blowout proof stem.
Slotted holes for high
velocity pumps.
Item ID
DA64287
DA64288
DA64289
Mfg. No.
50413
50414
50415
Description
3/4 in. swt
1 in. swt
1-1/4 in. swt
Price
$21.37 pk.
26.33 pk.
32.29 pk.
FULL PORT FORGED BRASS BALL VALVES
with Primary/Secondary Loop Purge Tee Reversible Handle (600WOG / 150WSP)
• Best for use when installing secondary loops
off of the primary loop.
• Allows easy power purging off
the secondary loop.
Item ID
DA72188
DA70406
DA70408
DA70411
DA70412
DA70413
Mfg. No.
58643
58653
58654
58655
58663
58664
Size
1 in. x 3/4 in.
1-1/4 in. x 3/4 in.
1-1/4 in. x 1 in.
1-1/4 in. x 1-1/4 in.
1-1/2 in. x 3/4 in.
1-1/2 in. x 1 in.
Price
$21.59 ea.
34.29 ea.
35.72 ea.
37.59 ea.
46.79 ea.
49.61 ea.
FULL PORT FORGED BRASS BALL VALVES
with Hi-Flow Hose Drain Reversible Handle (600WOG / 150WSP)
• Designed for residential, commercial and industrial with water.
• Ideal for use directly after water meter to isolate
a home and purge the system.
• Hard chrome plated brass balls with Teflon® seats.
• Heavy duty forged brass body.
• Reversible lever handle.
Item ID
DA99909
DA99911
DA99912
DA99913
12
Mfg. No. Size
Price
50613W 3/4 in $15.09 ea.
50614W
1 in
20.79 ea.
50615W 1-1/4 in. 29.99 ea.
50616W 1-1/2 in. 41.99 ea.
SWEAT BALL VALVE
• Two-piece, full port, brass body.
• 600 psi WOG / 125 psi WSP.
Item ID
1511550
1511555
1511560
1511565
Mfg. No.
101-423NL
101-424NL
101425NL
101426NL
Size
1/2 in.
3/4 in
1 in
1-1/4 in.
Price
$4.99 ea.
7.93 ea.
12.96 ea.
18.89 ea.
“ALPHA” CIRCULATING PUMP
•
•
•
•
Variable speed.
115V, 1/16 HP.
Max. working pressure: 150 PSI.
Cast iron flange with terminal box for
conduit connection applications.
• Permanent magnet motor and reduces power
consumption by 50% or more.
Item ID
Mfg. No.
Price
DA94796 ALPHA-15-55F $143.99 ea.
“SUPER BRUTE” CIRCULATING PUMP
•
•
•
•
•
•
•
•
•
•
3-speed.
Integral check valve.
115V, 1/25 HP (UPS15-58FC).
115V, 1/6 HP (UPS26-99FC).
Max. working pressure: 145 PSI.
Quick connect terminal for easy installation.
Easy to install — easy to service.
Reliable starts — trouble-free performance.
Quiet — wet rotor tecnology.
Industry leading
3 year warranty.
Item ID
1051260
1051280
Mfg. No.
UPS15-58FC
UPS26-99FC
Price
$75.99 ea.
234.99 ea.
HEATING EDGE — LOW TEMPERATURE BASEBOARD
• A perimeter heating baseboard that consists of a unique, patented
"coil block" and mounting system.
• Delivers very high BTU/HR capacities (output) using minimal footage
compared to conventional baseboard.
• High capacity.
• Easy to install, rust resistant and easy to clean.
• Available in a variety of lengths from 2 ft. up to 8 ft.
• Attractive perforated cover design.
• Designed to deliver quiet comfort with performance and style.
• New enhanced scrub board fin design for maximum airflow.
• Superior low temperature performance range.
• Simple two piece mounting system – no brackets or hangers.
• Two pipe supply.
Heating Edge delivers
Where Heating Edge
high performance in style,
HE2 really shines is in low
and at low temperature ranges!
temperature applications.
Geothermal Heat Pumps,
Solar Thermal and PVT
Collectors and Condensing
Boilers are all great ways
to save energy and reduce
fossil fuel usage. All three
achieve their highest
efficiencies when delivering
low temperature water.
Call for pricing!
KIMBERLY 800-444-0101 • MILWAUKEE 800-569-3389 800-494-4259 800-677-0213 • MADISON 888-535-5595 800-677-0223 • GREEN BAY 800-444-1798 800-677-0233
3/4 INCH BOILER RELIEF VALVE
PRESSURE / TEMPERATURE GAUGE
• For installation on potable water heating storage vessels
to protect against over-temperature or excessive pressure.
• 30 psi.
• CSA Rating: 200,000 BTU/HR.
Item ID
DA33312
Mfg. No.
P1000AXL-30C
• For use on all types of hot water heating systems.
• 60° F. - 260° F.; 0 - 75 psi.
• Reads water pressure and water temperature.
Item ID
Mfg. No.
DA63289 PB300804-2-25E
Price
$10.89 ea.
HOT WATER BI-METAL THERMOMETER
•
•
•
•
•
3/4 INCH “POP TOP” ZONE VALVE
• Inverted flare with fittings.
• For use in fan coil and baseboard
applications.
• Designed for the control of hot water,
cold water and steam flow.
Item ID
DA7895
Mfg. No.
VT2343G13A02A0F
Price
$68.99 ea.
HIGH LIMIT CONTROL AQUASTAT RELAYS
Immersion-type controllers
that combine high limit
protection with switching
relay control of burner
and circulator motors.
• Circuit opens on
temp. rise to setpoint.
• Adjustable set-point
180° F. - 240° F.
DA51700
L8148A-1017
Item ID
DA99728 L8148E-1265
24 volt
DA51700 L8148A-1017 120 volt
Price
$159.99 ea.
124.79 ea.
UNIVERSAL OIL ELECTRONIC
AQUASTAT® CONTROLLER
• Provides electronic temp. sensing in a
UL limit-rated controller with a single
sensing probe.
• Controls the circulator, oil burner and
boiler temperature.
• +/- 2° F. accuracy and faster response times.
• Easy Installation: Improved terminal layout
and multiple knockouts make change-outs
a snap.
• Multi-function display.
Item ID
Price
DA74087 L7224U-1002 120 volt
$114.59 ea.
STRAP-ON AQUASTAT
Responds rapidly
• For limiting or regulating the temperature to temperature
changes!
of liquids in boilers and storage tanks.
• Circulator control, high limit or low limit.
• Operating temp.: 65° F to 200° F.
• 5° F. to 30° F. adj. differential high limit control.
• Visible control point scale and external adjustment
screw permit easy setting.
• Horizontal or vertical mounting of the remote element
into boiler tank, or other container.
• Case mounts to a vertical surface.
Item ID
Mfg. No.
Price
2322246 L6006C-1018 $71.89 ea.
Price
$15.39 ea.
2-1/2 in. dial size.
1/2 in. NPT brass removable socket.
35° F. - 250° F.
Stainless steel. Moisture proof.
Heavy glass face is hermetically sealed
with the case and bezel assembly.
Item ID
DA58535
Mfg. No.
B259951-2W
Price
$8.50 ea.
QUIET-ONE 2000 SERIES KICKSPACE HEATERS
DA99728
L8148E-1265
KICKSPACE HEATERS … also used
with wall kit installations
• Totally enclosed units which slip easily
under a cabinet or in a wall.
• This ensures maximum utilization of floor
and wall space in such rooms as kitchens
and baths where space is a premium.
• The grille is removable and the chassis
does not have to be screwed to the floor.
• All that is required are solder connections
and power to the easy access
junction box. Once
these connections
are made, the
installation is complete.
Item ID
1071000
1071010
Mfg. No.
KS2004
KS-2008
Description
Price
4,810 Btu/Hr
10-7/8 x 13-7/8 x 13-7/8 x 3-1/2 in $132.49 ea.
9,785 Btu/Hr
10-7/8 x 13-7/8 x 20 x 3-13/16 in. 181.49 ea.
LOW VOLT ELECTRIC HEATING
(AMBIENT & FLOOR) MANUAL THERMOSTAT
• Advanced temperature control ensures total comfort
by minimizing temperature swings.
• ON/STANDBY switch enables thermostat shutdown
at the end of heating season for added security.
• On-screen heating power indicator gives at-a-glance
verification of power being used.
• Backlit display.
• Battery-free.
• 10 ft. Floor Sensor.
Item ID
2325116
Mfg. No.
TH114-AF-024T
Price
$53.99 ea.
ZONE VALVE WITH END SWITCH
• ON-OFF and two-way low voltage valves
consist of an actuator and valve assembly
for controlling the flow of hot water.
• 24V, 3/4 in. sweat connection.
• Low voltage motorized zone valves
with 3.5 Cv capacity.
Item ID
DA16480
Mfg. No.
V8043E-1012
Price
$63.99 ea.
13
STEAM VENTS — NON-VACUUM
75 & 75H
70A — AIR VALVE
4A
1A
•
•
•
•
•
•
Float-type vent.
Single non-adjustable port.
Meets Federal Specification WW-V-151 for Type 1 Non-Adjustable Valves.
1/8 in. NPT angle connection.
Maximum operating pressure: 11 psig (0.8 bar)*.
Maximum pressure: 15 psig (1.0 bar) Main.
* Drop away pressure (maximum pressure against which the vent can open).
4A — AIR VALVE
1A — AIR VALVE
70A
• Float-type vent.
• Adjustable port for true proportional venting –6 port settings
from slow (1) to fast (6).
• 1/8 in. NPT angle connection.
• Maximum operating pressure: 1-/12 psig (0.1 bar)*.
• Maximum pressure: 10 psig (0.7 bar).
Call for pricing!
Item ID
DA16237
DA83586
DA69748
DA69763
DA65891
Mfg. No.
1A
70A
4A
75
75H
Description
Radiator Steam Vent
Radiator Steam Vent
Main Steam Vent
Main Steam Vent
Main Steam Vent
FLOAT AND THERMOSTATIC STEAM TRAPS
• Designed for commercial and industrial
heating applications such as steam main
drip traps, unit heaters, tank coils, air
make-up coils, shell and tube heat
exchangers, or others that require
frequent start-ups and continuous
modulating loads.
• Stainless steel internal components.
Mfg. No.
404200
404210
404202
404212
Model No.
FT015H
FT015H
FT030H
FT030H
Float-type thermostatic vent.
For residential or small one-pipe or two-pipe systems.
1/2 in. NPT female and 3/4 in. NPT male straight shank.
Install 6-10 inch (150-250mm) above horizontal return and
18 in. (450mm) above the boiler water line.
• Maximum operating pressure: 2 psig (0.13 bar)*.
75 & 75H — AIR VALVE
•
•
•
•
•
Float-type thermostatic vent.
For medium and large systems.
1/2 in. NPT female and 3/4 in. NPT male straight shank.
Maximum operating pressure*:
– 75 = 3 psig (0.2 bar)
– 75H = 10 psig (0.7 bar).
* Drop away pressure (maximum pressure against which the vent can open).
BALANCED PRESSURE
THERMOSTATIC STEAM TRAP
• Subcooling for extremely efficient system operation and elimination
of flash steam losses on low pressure systems.
• Replaceable Dura-Stat® module.
• Meets Mil specifications WW-T-696-E
Type V, Style A, Class 1 and 2.
• Stainless steel components.
• Maximum operating pressure:
25 psig (1.7 bar).
• 3-Year Warranty.
Call for pricing!
Item ID
DA35926
DA69760
DA68515
DA68516
•
•
•
•
•
Description
3/4 in. H Pattern, 15 psi
1 in. H Pattern, 15 psi
3/4 in. H Pattern, 30 psi
1 in. H Pattern, 30 psi
Call for pricing!
Item ID
DA68269
Mfg. No.
17C-2
Description
1/2 in. Angle
Design Air’s Hydronic Support Services
“We Will Impress You” with the finest design support services to make your hydronic installations
a success.
Radiant panel system quotations are a service in which we offer HVAC contractor clients to assist them
in the proper layout and product selection. This service is provided to clients who purchase products from
Design Air. This service will assist the contractor with specifications for equipment, tubing, pumps, and
specific hydronic accessories. The contractor must add basic installation accessories needed to complete
the project. A floor plan of the project is required for a comprehensive and complete quotation. Contact our
Hydronic Specialist / HVAC Designers for assistance.
14
LOW WATER CUT-OFFS
67 — FOR STEAM BOILERS
64
67
150E
• Heavy duty LWCO for residential, commercial, and industrial boiler
applications of any steaming capacity.
• Adjustable BX outlet for easy installation.
• Dual precision switches for dependable operation of LWCO and alarm or
electric water feeder.
• Packless bellows.
• 1 in. (25mm) NPT equalizing pipes required.
• Maximum boiler pressure: 50 psi (3.5 kg/cm2).
• Use with TC-4 on hot water systems.
Call for pricing!
Mfg. No.
64
67
150E
For residential and commercial applications of any steaming capacity.
Quick hook-up fittings provided.
Lever-operated, full port ball valve for easy blow down.
Adjustable BX outlet for easy installation.
Dual precision switches for dependable operation of LWCO
and alarm or electric water feeder.
• Large float chamber.
• Max. steam pressure 20 psi (1.4 kg/cm2).
150E – FOR STEAM BOILERS
64 — FOR STEAM AND HOT WATER BOILERS
Item ID
DA69737
1061266
DA69740
•
•
•
•
•
Description
Mechanical Low Water Cut Off
Mechanical Low Water Cut Off
Electronic Combo. LWCO / Pump Controllers
• Primary and secondary low water fuel cut-off protection and
pump control for commercial and industrial steam boilers.
• Motorized valve controller, low water cut-off, high water cut-off,
and alarm actuators for boilers, vessels and tanks.
• Set points and differentials remain constant throughout pressure range.
• Diagnostic features incorporated in the control include:
– High ambient temperature protection
– Internal LEDs that indicate water position and condition
– External LEDs that indicate control activity.
• Control unit can be mounted remotely from probes.
• Adjustable 60-second burner-off time delays.
• Adjustable 3/4 in. or 1-3/16 in. pump differentials.
• 1 HP burner and pump relays.
• NEMA 1 enclosure.
• Maximum ambient temperature: 135° F. (57° C).
• Maximum operating pressure: 150 psi (10.5 kg/cm2).
• Maximum operating temperature: 366° F. (185° C) at probes.
• Maximum pressure: 150 psi (10.5 kg/cm2).
WEATHERKING GAS FURNACES
Whether it’s
new construction or
residential replacement,
WeatherKing has the
cost effective solution.
MBH Input
42,000
56,000
70,000
84,000
98,000
112,000
Model
EFFICIENCY
Whether you’re building a new home or
looking to upgrade the heating system in
your current home, there’s a WeatherKing
high-efficiency gas furnace to fit your needs.
WeatherKings’ newly enhanced 92-96% gas
furnaces are full of the features that are found
in many of the much higher priced brands...
As a matter of fact, in many comparisons,
WeatherKing will out feature many of the
competitors. Choose the furnace that best
fits your needs and let us get you on the
path to savings, home comfort,
and years of dependability.
*AFUE - Annual Fuel Utilization Efficiency
Blower motor type
Gas Fire Operation Type
4-way multi-position 34 inch tall cabinet
W96V ECONET ™
CONTROL CENTER
QUALITY &
RELIABILITY
***Limited Warranty:
Conditional parts warranty
Heat exchanger warranty
Total replacement warranty
Exclusive PlusOne™ Ignition System
Direct Spark Ignition (DSI) for longlife reliable operation
PlusOne™ Water Management System featuring an
Industry-first blocked drain sensor
W95P
Price
$699.00 ea.
730.00 ea.
733.00 ea.
848.00 ea.
904.00 ea.
981.00 ea.
W95T
Price
$821.00 ea.
852.00 ea.
895.00 ea.
971.00 ea.
1,027.00 ea.
1,099.00 ea.
W96V
Price
—
$1,074.00 ea.
1,108.00 ea.
1,264.00 ea.
1,319.00 ea.
—
Silver Series
Gold Series
Platinum Series
W95P
W95T
W96V
95%
95%
96%
Multi-Speed PSC
Constant Torque ECM
Variable Speed ECM
Single Stage
P
Single Stage
P
Two Stage
10 years
Limited Lifetime
—
10 years
Limited Lifetime
—
10 years
Limited Lifetime
10 years
P
P
P
P
P
P
P
P
PlusOne™ Diagnostics Service features an industry-first
7-segment digital LED display
P
Automatic system configuration assures the furnace is
properly set-up for maximum comfort and efficiency
P
—
—
Optional
Internet control and mobile app provides anytime,
anywhere access and control
—
—
Optional
Intuitive lifestyle programming with touchscreen display
for simple homeowner use
—
—
Optional
* Annual Fuel Utilization Efficiency (AFUE) measures the amount of heat delivered to a home compared to the amount of fuel that is supplied to
the unit. Higher AFUE ratings reflect higher efficiency.
*** Registration within 60 days of installation, original homeowner and residential application only. See Warranty Card for full details.
15
"36C" UNIVERSAL GAS VALVE
•
•
•
•
CONTINUOUS PILOT COMBINATION GAS CONTROL
Natural gas.
24 VAC.
Mfg. No. 36C03-300: Standing pilot gas valve.
Mfg. No. 36C03-333: Standing pilot gas valve
w/LP Kit and side taps.
Item ID
DA33265
DA33267
Mfg. No.
36C03-300
36C03-333
• For use in gas-fired appliances.
• Included are a manual valve, safety shutoff, two
automatic operators, a pressure regulator, and
a LP conversion kit.
• The kit contains a new cap screw, pressure
regulator adjustment screw, a tapered spring,
and a conversion label.
• 3/4 in. inlet x 1/2 in. outlet
(factory-installed inlet flange).
Price
$61.39 ea.
70.29 ea.
Item ID
Mfg. No.
DA16481 VR8300A-3500
INTERMITTENT HOT SURFACE
PILOT IGNITION SMARTVALVE™
UNIVERSAL ELECTRONIC IGNITION GAS CONTROL
• Compatible with hot surface ignition, intermittent pilot
and direct spark ignition.
• Replaces virtually any HSI, IP, or DSI gas control.
• Compact to fit into tightly packed, high efficiency
heating equipment.
• Works with virtually all residential equipment, with
a regulation capacity range of 30,000
to 415,000 Btuh natural gas.
• 3/4 in. inlet x 3/4 in. outlet.
• Includes 1/2 in. bushing
and LP Kit.
• Suitable for gas-fired appliances including
residential furnaces, roof-top furnaces,
residential boilers, unit heaters, infrared heaters,
space heaters and commercial cooking units.
• 1/2 in. NPT x 1/2 in. NPT
Item ID
Mfg. No.
Price
DA50960 SV9501M-2528 $163.69 ea.
CONTROL
TRANSFORMERS
Item ID
2327100
• End bell type.
Price
$87.29 ea.
Mfg. No.
50302
50314
Description
120V 40VA 3-way 24 Sec Term
T500 120/208/240V 50VA
Price
$7.99 ea.
12.99 ea.
• Include 2-1/4 inch resilient rings for
base mounting.
• Angle sleeve bearings and have open air
over enclosures.
• Four inch long, 1/2 inch diameter shaft.
Item ID
DA90888
DA90890
DA90891
DA90892
DA90893
HUB PULLER
• 5/8 inch steel center shaft.
• Long lasting heavy steel construction.
• Hardened steel fingers
to remove fan blades
with unaccessible hubs.
Pull off fan blades and
blower wheels!
Mfg. No.
MA-FB2
Price
$18.99 ea..
SPIRAL PIPE & FITTINGS
The most innovative way to join
round spiral duct and fittings without sealant or duct tape.
Stocking 6 inch - 24 inch Diameters • Gauges 26 thru 22
16
Mfg. No.
VR8345M-4302
REVERSIBLE DIRECT DRIVE MOTORS
Item ID
DA68477
DA17325
Item ID
DA83136
Price
$75.59 ea.
Mfg. No.
10466
10583
10585
10587
10589
Description
1/5-3/4 HP, Multi-HP
1/4 HP, 115V, 3 Spd.
1/3 HP, 115V, 3 Spd.
1/2 HP, 115V, 3 Spd.
3/4 HP, 115V, 3 Spd.
Price
$67.29 ea.
47.19 ea.
48.75 ea.
58.99 ea.
66.99 ea.
BELT DRIVE MOTORS
•
•
•
•
•
1,725 RPM - single speed.
Ball bearing construction.
Resilient base mounted.
1/2 inch shaft diameter.
Slotted holes in base match 48 or 56 frame bolt patters.
Item ID
DA90880
DA90881
DA90552
Mfg. No.
10401
10406
10408
Description
1/4 HP, 115V
1/3 HP, 115V
1/2 HP, 115V
Price
$54.99 ea.
58.99 ea.
74.29 ea.
EVERGREEN ECM
MULTI-HORSEPOWER MOTORS
• ECM (Electronically Commutated Motor) technology
provides energy savings.
• Two motors cover all applications.
• Multi-volt 115/230 and Reversible Rotation.
• Integrated with HVAC system controls/operation.
• Four speed selections for heating and cooling.
• Optimized constant fan speed.
Item ID
2816000
2816010
Mfg. No.
06005
06010
HP
1/2
3/4
Volts
115/230
115/230
Price
$199.00 ea.
249.00 ea.
“COLD BLOCKER” INFRARED U-TUBE HEATER
WITH PRE-ASSEMBLED BODY PACKAGE
•
•
•
•
50,000 Btu/hr.
Natural gas or LP.
One-piece cast iron burner.
U-tube design for uniform
energy distribution.
• 3 inch O.D. calorized aluminized steel
emitter tube for long life and high radiant efficiency.
• 10-year limited warranty on burner.
Item ID
DA28534
DA28535
Type
of Gas
Nat.
LP
Mfg. No.
CB50N5
CB50L5
Price
$595.00 ea.
595.00 ea.
MAXITROL PRESSURE REGULATOR WITH LIMITER
®
• Features a high leverage valve linkage assembly
to deliver positive dead-end lock-up.
• Capable of precise regulating control from full flow
down to pilot flow.
• Made for natural or LP gas.
• Housings are corrosion-resistant aluminum alloy.
• Designed for multi-poise mounting.
• Self-aligning valve with lever action for
dead end lockup.
Item ID
DA95544
Mfg. No.
325-3L
Description
1/2 in. pipe
Price
$13.90 ea.
UNIVERSAL ELECTRONIC FAN TIMER
• Integrates control of combustion blower and circulating
fan operations for a gas warm air appliance.
• Replaces 40+ existing Honeywell electronic
fan timers.
• Instruction sheet supplies full cross reference
and wiring guide.
• Integrates control of all combustion blower and
circulating fan operations in gas warm-air appliance.
• Interface harnesses for simple conversion.
• Replaceable fuse.
• DIP switch selectable heat and cool
delay on and off times.
• LED lights for easy diagnostics.
• Electronic air cleaner and humidifier terminal connections.
• Continuous low speed indoor air circulation.
Item ID
2324800
Mfg. No.
ST9120U-1011
Price
$95.42 ea.
UNIVERSAL COMBINATION FAN AND LIMIT CONTROLLERS
• Controls the on and off operation of the heating
unit’s fan motor and provides high limit
control of the main burner.
• Manual reset fan switch overrides the fan set
points and keeps the fan running continuously.
• Adapts to most competitive mounting holes
for ease of replacement installations.
Item ID
Mfg. No.
2322034 L4064B-2210
2322060 L4064B-2228
2322086 L4064B-2236
Size
11 in.
5 in.
8 in.
Price
$64.99 ea.
64.99 ea.
64.99 ea.
PILOT TUBING
* Kits include:
Aluminum tubing coil
1-brass breakaway fitting
1-brass sleeve
1-brass compression nut.
Item ID
DA18294
DA18295
Mfg. No.
MA-AT18-5
MA-AT14-5
Description
1/8 in. x 5 ft.
1/4 in. x 5 ft.
Price
$6.79 ea.
4.09 ea.
FREEZE ALARMS
• FA-700: The FreezeAlarm Dialer automatically calls out to one telephone
number when the temperature drops below 45°.
This Alarm gives the person answering the call a
pre-recorded voice message indicating there is a
temperature emergency at the monitored
location. It will even record the alarm message
on your answering machine or voice mail. This
unit will continue to call your programmed
number until someone calls back to tell the
Freeze Alarm to stop calling.
• FA-I:
The Intermediate FreezeAlarm™ has a Quick Status Feature that
allows you to hear the current temperature, power status and battery
status with a simple 15 second phone call! This model calls up to
three phone numbers and alerts you with a voice message if the
temperature gets too cold or too hot, if
the power fails, or if the back-up
battery requires replacing. Easy
programming, automatic reset,
and a quick programming setup
is what makes this our most
popular Alarm.
• FA-D: The Deluxe FreezeAlarm™ lets you warm up the cabin by
telephone. Simply install a second thermostat and with one phone
call, switch between the thermostat set at 50° to the
one set at 70° and enjoy a comfortable cabin
when you arrive. This unit calls up to three
phone numbers if there is a temperature
emergency, prolonged power failure, or if
the backup battery needs replacing. Also
can call a numeric pager and leave a
numeric message on the pager display.
Item ID
DA96073
DA60614
DA4447
Mfg. No.
FA-700
FA-I
FA-D2
Description
Basic
Intermediate
Deluxe
Price
$49.99 ea.
132.69 ea.
165.99 ea.
WINTER WATCHMAN
Used as a freeze warning device. Completes
circuit to household lamp on temperature fall,
indicating inoperative heating equipment.
Plugs directly into wall outlet!
• Lamp plugs into receptacle at bottom of device.
• Useful when house is unoccupied to notify a neighbor
of a temp. drop so heating source fault can be rectified
before freeze-up occurs.
Item ID
2324850
Mfg. No.
S483B-1002
Price
$25.99 ea.
17
UNIVERSAL SILICON NITRIDE HOT SURFACE IGNITERS
• HSIURK120vR Glo-stix® 120v - ROUND Igniter is designed to replace
over 120 types of furnaces, boilers, or water heater igniters.
• HSIURK120vF Glo-stix® 120v - FLAT Igniter is designed for
use on furnaces, boilers, water heaters or dryers.
Replaces Norton: 101M, 201L, 201P, 271D, 271NM,
271RS, 201D, 201M, 201W, 271M, 271P, 271W,
201K, 201N, 271, 271N, and 271R.
Robertshaw Uni-line: 41-238, 41-403, 41-407,
41-410, 41-414, 41-242, 41-404, 41-408, 41-411,
41-1090, 41-402, 41-405, 41-409, and 41-412.
Item ID
Mfg. No.
DA88257 HSIURK120vR
2342000 HSIURK120vF
Price
$22.99 ea.
24.99 ea.
SMART-LITE™ IGNITER KIT
Kit includes: 24V silicon nitride hot surface, igniter
flame rod assembly, full replacement product list,
spring clip, high temperature cable, full fitting
instructions, appliance contact label.
Item ID
DA70479
Mfg. No.
SLURK24V
• Main burner ignition using a 120V hot surface igniter.
• Flame rectification circuit to monitor flame presence.
• Monitoring of system pressure switch, high temp.
limit, and rollout functions.
Mfg. No.
S9200U-1000
• For gas-fired forced-air furnaces, water heaters and boilers.
Kit includes:
Nitride Ignitor with 15.5 inch Leads
One “Universal” Mounting Bracket and Screw
Mounting Adapter Bracket
2 Ceramic Wire Nuts
Manufacturer Cross-Reference
Nitride Upgrade Furnace Label
Instruction Booklet.
Item ID
DA73746
Item ID
Mfg. No.
Description
2323200 Q3200U-1004
Single Kit
2323205 Q3200U-2002 Service Pack of 6 Kits
TARGET TYPE
PILOT ASSEMBLY
Mfg. No.
S8610U-3009
Price
$95.59 ea.
UNIVERSAL HOT SURFACE IGNITION MODULE
• On board diagnostics and an LED status
indicator make troubleshooting a snap.
• Replaces over 100 hot surface
ignition modules.
• Natural or LP gas.
Item ID
2325090
Mfg. No.
S8910U-1000
Price
$98.89 ea.
CARBIDE NON-INTEGRATED HOT SURFACE IGNITION CONTROL
• For gas-fired non-integrated forced-air
furnaces and boilers.
Kit includes:
Program keys.
Mounting hardware.
Double-sided foam back tape.
Extensive cross-reference guide.
Color-coded timing label.
Preprinted hanging carton.
Item ID
3880610
18
Mfg. No.
50E47-843
Price
$97.99 ea.
DA33824
Q314A-6094,
DA16500
Q345A-1305
Item ID
2323150
2323037
DA33824
DA58039
Price
$23.99 ea.
137.99 ea.
2323037
Q314A-4586,
• Provides pilot flame ignition.
• Includes special mounting
bracket with screws.
UNIVERSAL INTERMITTENT PILOT MODULE
Item ID
2325082
Price
$18.79 ea.
· Multiple brackets to adapt as field
replacement of Norton / St. Gobain
silicon carbide igniters
Price
$88.89 ea.
• Field-selectable prepurge and ignition
trial timings let you replace even more
models with just one control.
• Suitable for use with vent dampers.
• Natural or LP gas.
Mfg. No.
21D64-2
GLOWFLY™ UNIVERSAL
HOT SURFACE IGNITORS
WITH MOUNTING BRACKETS
Price
$20.59 ea.
UNIVERSAL HOT SURFACE IGNITION
INTEGRATED FURNACE CONTROL
Item ID
2325091
UNIVERSAL IGNITOR UPGRADE KIT
DA56039
Q314A-6102
Mfg. No.
Description
Q345A-1305
Spark Assembly
Q314A-4586
Standing Assembly
Q314A-6094 Standing Assembly, left
Q314A-6102 Standing Assembly, right
Price
$22.89 ea.
20.39 ea.
20.39 ea.
21.29 ea.
IGNITOR-FLAME ROD ASSEMBLY
•
•
•
•
For use with the SmartValve™ System.
30 inch lead length.
Hot surface pilot.
Ignitor / sensor assembly.
Item ID
DA16490
Mfg. No.
Q3400A-1024
Price
$48.39 ea.
UNIVERSAL THERMOCOUPLE
Item ID
2323063
2323089
2323115
2323116
DA16525
Mfg. No.
Q340A-1066
Q340A-1074
Q340A-1082
Q340A-1090
Q340A-1108
Size
18 in.
24 in.
30 in.
36 in.
48 in.
Price
$5.59 ea.
5.81 ea.
6.15 ea.
6.39 ea.
7.19 ea.
POWERPILE GENERATOR
• Universal replacement 750 millivolt.
• 35 in. L.
Item ID
DA51683
Mfg. No.
Q313A-1170
Price
36.59 ea.
HOT SURFACE IGNITOR CROSS REFERENCE & REPLACEMENT GUIDE
MANUFACTURER
AMANA
ARMSTRONG AIR
ARCOAIRE
CARRIER CORP.
CLARE BROTHERS
COLEMAN
COMFORTMAKER
COMFORT ZONE
DETROIT RADIANT
DMO INDUSTRIES
DUCANE
GOODMAN
HB SMITH
HEIL
INTERCITY
METZGER
MOR-FLO
NORDYNE
NORTON
PERFECTION SCHWANK
RAYPAK
EEM
ROBERTSHAW
ROBERTS GORDON
SNYDER GENERAL
TEMPSTAR
TRANE
TRIANCO-HEATMAKER
VIESSMAN
WEIL-McLAIN
WILLIAMSON
YORK
OEM
B1336102, D99182, 10041601
38322B001
1096048, 1380680
LH33ZS001A, LH33ZS002
C-238, C-242
1474-051, 1474-052
1096048
150114-04-01
201D
20834
20015201
B1401009
50018
1096048
1009604, 1096048
201N, 201W
3200580, 3210401
3200618
105141000, 632-0880, 632-0770
201
201A
201D
201J
201K, 201L
201M
201N, 201R, 201W
201Y
271
271A
271P
271M
271N
271NM
271W
271Y
108803-G1
600915
62-22441-01
62-22441-01
62-22868-82
41-401
41-402
41-403, 41-404
41-405
41-406
41-407
41-408
41-409
41-410
41-411
41-412
41-413
41-414
90434300
90436600
1380672, 1380680, 1380654
1096048
B138196P01
B144676P01
B144676P02
B340039P01
340039P01, IGN23
IGN26, IGN30
IGN30
IGN34
2600-359
9302-094
511-330-139
511-330-188
511-330-193, 511-330-190
09050
025-27766-000, 025-27774-000
025-29043-000, 025-29050-000
SUGGESTED
REPLACEMENT
767A-369
767A-371
767A-373
767A-370
767A-371
767A-371
767A-373
767A-374
767A-361
767A-371
767A-370
767A-373
767A-361
767A-373
767A-373
767A-371
767A-374
767A-371
767A-371
767A-370
767A-369
767A-361
767A-374
767A-371
767A-374
767A-371
767A-374
767A-370
767A-369
767A-361
767A-374
767A-371
767A-373
767A-371
767A-374
767A-374
767A-370
767A-372
767A-371
767A-372
767A-369
767A-371
767A-370
767A-361
767A-374
767A-376
767A-372
767A-370
767A-377
767A-372
767A-373
767A-375
767A-373
767A-370
767A-371
767A-370
767A-373
767A-370
767A-377
767A-376
767A-372
767A-371
767A-370
767A-376
767A-372
767A-369
767A-361
767A-370
767A-374
767A-370
767A-371
767A-361
HOT SURFACE IGNITORS
767A-361
767A-369
767A-370
767A-371
767A-372
767A-373
767A-374
767A-376
767A-377
Item ID
DA68376
Mfg. No.
767A-361
DA33198
DA68369
DA68368
DA68370
767A-369
767A-370
767A-371
767A-372
DA68372
DA68375
DA68374
DA68373
767A-373
767A-374
767A-376
767A-377
Lead
Electrical
Length
Connection
4-3/4 in. Receptacle with
.093 Male Pins
5-1/2 in. Amp Connection
19-1/2 in. Stripped Ends
with bracket
5-1/4 in. Connector
11 in. Stripped Ends
4-1/2 in. Amp 2 Pin molex
connector
Price
$15.49 ea.
15.29 ea.
13.85 ea.
14.71 ea.
13.85 ea.
13.19 ea.
16.85 ea.
23.71 ea.
15.84 ea.
19
Buy 12
Get 1
Buy 12 Braeburn Thermostats
off of this flier and Get 1 FREE!*
Mix & Match. * Free thermostat must be of equal or lesser value.
1 HEAT/1 COOL, SINGLE STAGE,
NON-PROGRAMMABLE
•
•
•
•
Conventional and heat pump.
Separate O & B terminals.
Low battery indication.
Gas/Electric Fan Switch.
Item ID
DA97408
DA97409
Mfg. No.
1020NC
1020
5-2 DAY PROGRAMMABLE
•
•
•
•
•
•
Conventional or heat pump.
Hardwire or battery powered.
Adaptive Recovery Mode (ARM™).
Filter check monitor.
Temporary program override.
Programmable extended hold mode.
Item ID
DA97407
DA97410
Mfg. No.
2020NC
2020
Description
2 sq. inch. display
3 sq. inch. display
WIRELESS THERMOSTAT SYSTEM KIT WITH
PROGRAMMABLE THERMOSTAT
• RedLINK™ enabled.
Kit includes:
Wireless FocusPRO® 5-1-1
Programmable Thermostat,
Equipment Interface
Module, Return Air Sensor.
Item ID
2327300
• View and adjust temperature settings through the
internet and through smart phones.
• Works with any RedLINK™ thermostat.
Price
$78.49 ea.
WI-FI 9000 THERMOSTAT WITH VOICE CONTROL
• Adjust thermostat from across the room - without lifting a finger.
• Recognizes voice commands from across the room.
• Monitor and manage home comfort when away
with Honeywell’s Total Connect Comfort App.
• On-board sensor measures indoor humidity
while local weather data populates outdoor
temperature and humidity.
• Voice recognition software will automatically
update as Honeywell adds new voice
commands and other enhancements.
Item ID
2325235
20
Buy 12
Thermostats
off of this flier and Get 1 FREE!*
Mix & Match. * Free thermostat must be of equal or lesser value.
NON-PROGRAMMABLE
• Easy access battery compartment.
Mfg. No.
T701
Description
4 sq. inch. display
5/1/1 PROGRAMMABLE
• Easy menu driven programming.
Item ID
2358910
Mfg. No.
T705
Description
4 sq. inch. display
1 HEAT/1 COOL, SINGLE STAGE, 7 DAY
OR 5/1/1 PROGRAMMABLE
• Auto Changeover.
Item ID
DA87308
Mfg. No.
T805
Description
8 sq. inch. display
2 HEAT/2 COOL, SINGLE STAGE, 7 DAY
OR 5/1/1 PROGRAMMABLE
• Auto Changeover.
Item ID
2359010
Mfg. No.
T855
Description
8 sq. inch. display
• 25˚ F. low temperature.
Mfg. No.
Connection
Price
YTH6320R-1001 Up to 3 Heat/2 Cool Heat Pump
or 2 Heat/2 Cool Conventional $179.99 ea.
Mfg. No.
THM6000R-1002
Get 1
1 HEAT OR 1 COOL, SINGLE STAGE,
NON-PROGRAMMABLE
REDLINK™ INTERNET GATEWAY
Item ID
2325330
Buy 12
Item ID
2358900
Description
2 sq. inch. display
3 sq. inch. display
Mfg. No.
Price
TH9320WFV6007 $239.99 ea.
Item ID
2359000
Mfg. No.
T771
Ideal for
garages!
Description
4 sq. inch. display
LYRIC WI-FI THERMOSTAT — UP TO 2 HEAT/2 COOL
HEAT PUMPS; UP TO 3 HEAT/2 COOL
CONVENTIONAL SYSTEMS
• Control from anywhere with your smart phone
or tablet with the Lyric App.
• Remote Access and Fine Tune temperature control.
• Geofence control for savings when you’re away
and comfort when you’re home.
Item ID
Mfg. No.
Price
2325227 TH8732WF5018 $229.95 ea.
HONEYWELL THERMOSTATS
2325120 TH4110D-1007
Item ID
2325120
2325125
2325145
2325125 TH5110D-1006
Mfg. No.
TH4110D-1007
TH5110D-1006
TH6220D-1002
2325145 TH6220D-1002
Connection
5/2 Day Programmable
Non-Programmable
5/1/1 Day Program, 2-stage
Price
$29.99 ea.
33.33 ea.
62.99 ea.
ELECTRONIC MANOMETERS
• Provides a time-saving alternative to
U-tube pressure measurements.
• DA90248 EM151 measures positive and
negative pressure to ± 20 inch WG.
Perfect for gas supply and draft pressures.
• 4721060 EM201 along with measuring
gas supply, the differential mode
provides a convenient method
to measure pressure drops.
Item ID
DA90248
4721060
Mfg. No.
EM151
EM201B
EM151
Description
Single Input Manometer
Dual Input Manometer
EM201
Price
$82.99 ea.
145.99 ea.
COMBUSTIBLE GAS LEAK DETECTOR
•
•
•
•
•
Designed to find combustible gas leaks in tight areas.
Adjustable tick rate to locate leaks quickly and easily.
18 inch goose neck.
Visual leak detection by chasing color LED’s.
Separate user adjustable alarm for
predetermined level detection.
• Light tip to illuminate search area.
Item ID
4721000
Mfg. No.
CD200
Mfg. No.
INF165
Price
$187.99 ea.
Item ID
DA90376
Item ID
2325150
2325200
2327520
2327500
2325250
2325115
Mfg. No.
C155KIT
Mfg. No.
DL389C
DIGITAL MULTIMETER
Price
$54.99 ea.
C155 Analyzer.
Flue probe.
R Printer
(2) K-Type temp. probes.
(2) Static pressure hoses.
(1) True draft probe.
Gas tap and hose.
AC adapter/charger.
Hard case.
(2) Printer paper rolls.
(2) Particle filters.
Batteries.
Quick start guide,
and owners manual.
Mfg. No.
DL379
Price
$97.99 ea.
Non-Contact Voltage 24 to 600V AC.
750V AC/1000V DC.
MIN/MAX.
-22˚ to 752˚ F. (K type).
40MΩ Resistance/Continuity.
Data Hold.
Dual display.
Worklight.
Magnetic mount.
Auto Off.
Carrying case.
3 Year limited warranty.
Item ID
DA86711
EAGLE 2X EXTENDED LIFE COMBUSTION ANALYZER
•
•
•
•
•
•
•
•
•
•
•
•
•
Non-Contact Voltage 24 to 600V AC.
750V AC/1000V DC.
MIN/MAX.
-22˚ to 752˚ F. Temperature (K type).
40MΩ Resistance/Continuity.
Data Hold.
Dual display.
Worklight.
Magnetic mount.
Auto Off.
Carrying case.
Item ID
4721015
•
•
•
•
•
•
•
•
•
•
•
•
Wide temperature range -36.4 - 689˚F.
Distance to Spot ratio: 12:1.
Selectable Emissivity (0.70, 0.95).
Max. value capture.
Auto off.
Item ID
DA98535
•
•
•
•
•
•
•
•
•
•
•
•
G2 PHOENIX PRO+ TRUE RMS DIGITAL CLAMP METER
INFRARED THERMOMETER
•
•
•
•
•
G2 PHOENIX PRO — DIGITAL CLAMP METER
Turn in
your old
combustion
analyzer & get
$200 off a
C155KIT!
•
•
•
•
•
•
•
•
•
•
•
•
Price
$149.90 ea.
Backlit display.
750 Volts AC and 1000 Volts DC.
Solid value in an
10 Amps AC and DC.
industrial-quality
Resistance to 40 megohms.
digital multimeter!
Diode check function.
Continuity.
3-3/4 inch Digit, 4000 count display.
Max capture mode.
Data hold.
On-screen range and function indicators.
CE and UL listed 600V CAT III.
Item ID
4721020
Mfg. No.
DM383B
Price
$49.99 ea.
CARBON MONOXIDE DETECTOR
Price
$1,252.98 ea.
CLOSE OUT THERMOSTATS
Mfg. No.
Connection
TH8110U-1003 Touchscreen 7 Day Program.
TH8320U-1008
VisionPro 7-day
YTH9421C1010/U
IAQ Pkg. w/Stat
Mod & Sensor
YTH9421C1002
VisionPro
TH9421C1004/U VisionPro IAQ TOT CMFT
TB8220U1003
Commercial
Price
$109.00 ea.
122.00 ea.
199.00 ea.
186.00 ea.
150.00 ea.
164.00 ea.
• Detects CO levels from 0 to 999 ppm.
• Tri-color LED warning indicates 3 concentration levels
– LED blinks GREEN when CO is 2-9 ppm,
– LED blinks AMBER when CO is 10-35 ppm,
– LED blinks RED with an Audible Alert at 34 ppm indicating
dangerous CO levels.
• MAX/CAPTURE continually updates highest CO reading.
• Backlit display.
Item ID
4721002
Mfg. No.
C071A
Price
$172.29 ea.
STATIC PRESSURE PROBE TIP
• Works with EM151 and EM201
Electronic Manometers.
Item ID
DA97592
Mfg. No.
ASP1
Price
$14.59 ea.
21
Call for pricing on Revolv® Furnaces!
DGAA CONQUEST SERIES GAS
MANUFACTURED HOUSING FURNACE
• 80% + AFUE manufactured housing gas furnaces.
• A/C ready to 4 tons.
• Built-in coil cabinet.
• Contoured door design.
• Full louver high impact plastic return air door.
• Standard replaceable filters (included).
• Fail-safe auto-ignition system.
• Approved for mobile / modular home.
Key Features:
• Air conditioner ready DGAA models have blowers
capable of handling up to 4 tons of air conditioning.
• Sealed combustion design draws in combustion air
directly from outside, provides quiet operation while
increasing operation efficiency and reducing
cold drafts.
• Built-in coil cabinet is design-matched to work in
conjunction with Revolv® heat pumps and air conditioners,
providing ease of installation and highly efficient operation performance.
Price
$8.21 ea.
FURNACE MOUNTING BLOCKS
•
•
•
•
Easy peel and
stick installation!
Each block can support 300 lbs
Holds furnace off floor to prevent moisture and rust of furnace
Absorbs vibration and noise
Durable plastic construction
Item ID
4780350
Mfg. No.
19893
Price
$1.99 ea.
STAINLESS STEEL GAS CONNECTORS
•
•
•
•
Corrosion resistant stainless steel 304 tubing.
Zinc-plated steel fittings.
Standard pipe thread ends.
5/8 inch OD, 1/2 inch FPT x 1/2 inch MPT.
Item ID
DA5995
DA5996
2140410
2140412
2140414
Mfg. No.
EFGC-012-SS-1011-12
EFGC-012-SS-1011-18
EFGC-012-SS-1011-24
EFGC-012-SS-1011-36
EFGC-012-SS-1011-48
Length
12 inches
18 inches
24 inches
36 inches
48 inches
SHOP TOWELS
• 15 inch x 15 inch 100% cotton towel.
• Extra absorbent and ideal for cleaning up grease
on tools or machinery, for drying, polishing,
dusting and waxing.
• Long lasting and machine washable.
• Hemmed edges.
Item ID
DA72328
22
Mfg. No.
79025
Item ID
DA95784
Mfg. No.
R7284U-1004
Price
$55.99 ea.
ODORGON™
•
•
•
•
Kills odors and absorbs oil from concrete and floors.
Handy for cleaning up after spills and oil leaks.
Leaves a pleasant odor after absorbing spills.
Non-explosive, non-flammable and safe.
Item ID
1832392
1832375
Mfg. No.
68512
68516
Description
16 oz. Powder
14 oz. Spray
Price
$7.19 ea.
9.18 ea.
• Smooth and creamy furnace and retort
cement that sticks where you put it.
• Use in combustion chambers and for
sealing doors and flue pipes.
• For high temperature sealing and bonding.
• Shrink-proof, crack-proof.
• 5-1/2 inch ID-48 Frame
Kit includes:
Bracket
Sleeves
Steel screws
Rubber Grommets
Mfg. No.
MA-60048
• A universal control that replaces multiple
controls, provides upgrade opportunities.
• LCD display.
• Valve-on and blower motor-off delay.
• Alarm contacts.
• 15-30-45 second delay.
PYROSEAL™ FURNACE CEMENT
MOUNTING BRACKET
Item ID
2815000
UNIVERSAL ELECTRONIC OIL PRIMARY
Price
$8.29/12 pk.
Price
$6.70 ea.
8.26 ea.
9.94 ea.
11.58 ea.
17.48 ea.
Item ID
DA39877
1832652
1832664
1832681
Mfg. No.
68612
68614
68616
68618
Size
1.5 lbs.
3 lbs
6 lbs.
12 lbs
Price
$4.99 ea.
6.75 ea.
8.91 ea.
15.59 ea.
GREAT WIPES
• Industrial strength hand towels.
• Waterless wipes made specifically for refrigeration, air conditioning,
refrigeration, and plumbing technicians.
• Each premoistened, heavy duty towel has strong
pumice scrubbing power that conveniently cleans
anywhere and anytime.
• Absorbs quickly to remove substances, such as
lubricant, grime, ink, tar, caulk, sealant paint,
epoxy, adhesive, grease, urethane, and much more.
• Can also be used to degrease tools, tool boxes,
equipment, work surfaces, metal, vinyl, painted
surfaces, compressor parts, components, and more.
• Fresh citrus scent.
Item ID
1855110
Mfg. No.
4185-75
Description
75 count bucket
Price
$11.79 ea.
CHRISTY’S RED HOT CLEAR GLUE™— LOW VOC
• No primer required. All-weather, wet or dry.
• A very aggressive, clear, medium bodied, fast
setting PVC solvent cement.
• For use on all schedules and classes of PVC pipe
through 8 inch, schedule 80 through 4 inch.
It is chemically the “hottest” solvent cement
formulation available on the market today!
Item ID
DA84941
Mfg. No.
RH-RHCV
Description
1 Quart Container
Price
$18.24 ea.
OIL BURNER NOZZLES
OIL BURNER CONTROL
• .50 thru 2.00 GPH
Description
Hollow (A) & Solid (B)
Dual Purpose (W)
• Provides automatic, nonrecycling control
of an intermittent ignition oil burner system.
• Solid state flame sensing circuit.
• LED for lockout indication.
Price
$3.70 ea.
3.77 ea.
OIL PUMPS
Item ID
2324035
2460U
• Speed: 3,450 RPM.
• Single stage. Right-hand.
• 3 GPH.
Price
$61.19 ea.
OIL PUMP COUPLER KIT
• Included is the coupler assembled with 1/2 inch
motorshaft end, and a 7/16 inch fuel unit shaft
cap on the other. A 5/16 inch fuel unit shaft end
cap is also enclosed. Over-all 5 inch assembled
coupler length.
Faster, cleaner,
more reliable
cut-offs and cut-ons!
Item ID
3874050
3874060
Mfg. No.
R8184G-4009
Mfg. No.
Description
Price
2460U
Oil Pump
$71.19 ea.
2184404U Clean Cut Oil Pump 74.59 ea.
2184404U
Beckett
Item ID
DA5045
Mfg. No.
KK120
Price
$4.56 ea.
CADMIUM SULFIDE FLAME DETECTOR
PSC MOTOR
• 1/7 HP.
• Speed: 3,450 RPM.
• Glass-to-metal hermetic seal prevents humidity,
soot or oil fumes cell deterioration.
• With interchangeable mounting brackets.
• 60 inch leads.
Lower amp draw,
cooler operation,
fewer failures!
Item ID
Mfg. No.
Price
3870200 5100-21805U $51.89 ea.
Item ID
2321208
Beckett
Mfg. No.
C554A-1463
Price
$13.79 ea.
END CONES
PURE OIL™ OIL FILTER REFILLS
• Individually bagged with gaskets.
• F10-48: General 1A-25A; Unifilter 77; Westwood
F10, F12, F15, F20, F25; Sid Harvey (Mitco) 264, 264F.
• F80-48: Fulflo FB4.
Item ID
DA5024
DA69614
Mfg. No.
F10-48
F80-48
Price
99¢ ea.
$1.10 ea.
• 120 VAC.
• Includes terminals, gaskets
and mounting hardware.
Beckett
Mfg. No.
51771U
51829U
51830U
51831U
51833U
Description
Electronic Igniter
Wayne “M” base plate
Beckett “A” base plate
Beckett “S” base plate
Wayne “E” base plate
Item ID
3874015
DA2830
3874010
DA2828
Mfg. No.
F-6
F-4
F-3
F-0
WE STOCK
ELECTRONIC IGNITER WITH BASE PLATE
Item ID
3870305
DA41338
DA41336
DA41339
DA41340
Beckett
Price
$36.99 ea.
11.99 ea.
7.49 ea.
11.59 ea.
11.19 ea.
Item ID
DA42058
Mfg. No.
51835
Price
$199.00 ea.
Price
$6.29 ea.
6.29 ea.
6.29 ea.
6.29 ea.
OIL FURNACES!
Quiet operation
• Olsen’s industry-renowned heavy gauge steel
& exceptional
heat exchanger carries a Lifetime Warranty.
comfort.
• Completely insulated furnaces and multi-speed blower.
• Equipped with technologically-advanced top
quality Beckett burners.
• Fits in any spot. Designed for flexibility, multiposition models can be placed horizontally
or vertically.
HIGHBOY
HML, HTL
79,000 - 119,000 BTU
LOWBOY
BCL, BFL, BML
79,000 - 143,000 BTU
ELECTRONIC OIL TRANSFORMER KIT
Kit includes:
2 Ignitors
8 Base plates
2 Terminal Kits
Description
.85 - 1.65 GPH
.75 - 1.35 GPH
.75 - 1.25 GPH
.40 - .75 GPH
COUNTERFLOW
Beckett
MPL
91,000 - 128,000 BTU
23
HEATER
The perfect heating solution for residential, commercial, and industrial use.
Compact light-weight, and easy to install.
MODINE HD SERIES HOT DAWG® POWER-EXHAUSTED,
GAS-FIRED UNIT HEATER
• Right or left hand controls available on all 30-75 units. Gas, electrical and flue
connections can be changed by simply flipping the Hot Dawg over.
• Lightweight, easily installs 1 inch from ceiling with only two angle brackets.
(included on sizes 30-75, accessory for 100, 125).
• Full 10-year warranty on heat exchanger.
• Standard power exhaust simplifies side-wall
or roof venting with small-diameter vent pipe.
• Permanently-lubricated motor for trouble-free
dependability.
• Controls can be either single or two-stage,
direct spark ignition, 100% shut-off with
continuous retry.
Item ID
3161030
3161045
3161060
3161075
3161100
3161110
Mfg. No.
HD30A
HD45A
HD60A
HD75A
HD100A
HD125A
Btu’s Description
Price
30,000
Nat. Only $463.00 ea.
45,000
Nat./LP
481.00 ea.
60,000
Nat./LP
551.00 ea.
75,000
Nat./LP
566.00 ea.
100,000 Nat. Only
658.00 ea.
125,000 Nat. Only
712.00 ea.
Venting Scenarios for the Modine HD series Hot Dawg Heaters
Residential vertical venting may be considered category I venting and may be class “B” venting up through the roof
terminating at a point 2 ft. higher than any portion of the roof with 10 ft. of the vent, or 2 ft. above the peak. The connectors
(smoke-pipe) may be single wall galvanized pipe. Modine recommends terminating with a Gary Steel #1092 or equal cap.
Residential horizontal is considered category III and must be vented with an approved stainless steel material (AL294C or
Z-vent equal). A wall thimble or class “B” clearance is required where the venting material penetrates the wall. The termination
should be done with stainless steel vent accessories.
MODINE HSB SERIES STEAM / HOT WATER, HORIZONTAL UNIT HEATERS
• Recommended for use in buildings where ceilings are low and with few obstructions.
• Top and bottom supply and return connections.
• Units install quickly, easily, and at low cost because they are lightweight,
yet are ruggedly constructed to resist rigorous handling and on-the-job abuse.
• Totally enclosed motor with thermal-overload protection.
• Fans are statically and dynamically balanced.
Item ID
Mfg. No.
Btu’s
• Horizontal air deflector blades are standard.
DA36353 HSB-24S-01 24,000
• The unit casing is treated for protection
DA35597 HSB-33S-01 33,000
against corrosion prior to the application
DA22712 HSB-47S-01 47,000
of the attractive gray-green, baked-on
DA36451 HSB-63S-01 63,000
polyester powder coat paint finish.
Price
$347.00 ea.
399.00 ea.
467.00 ea.
511.00 ea.
MODINE PDP SERIES 80% POWER VENTED UNITS - NATURAL GAS
• The power vented unit heater was designed for use with a building’s heating systems where
negative pressure or energy savings may be an issue.
• Input ranges from 150,000 to 300,000 Btu/Hr and can operate on either natural or propane gas.
• Differential pressure switch for proof of venting.
• 115V control step down transformer with
24V gas controls.
Item ID
Mfg. No.
Btu’s
Price
• Power Exhauster Motor.
3166740
PDP150AE
150,000
$787.00
ea.
• Certified to 0.5 in. W.C. external static
3166750
PDP175AE 175,000 851.00 ea.
pressure.
3166760
PDP200AE 200,000 899.00 ea.
• Single stage intermittent pilot with contin3166770
PDP250AE 250,000 1,125.00 ea.
uous retry control system for operation on
3166780
PDP300AE 300,000 1,245.00 ea.
natural gas.
3166790
PDP350AE 350,000 1,389.00 ea.
• High limit safety control.
3166800
PDP400AE 400,000 1,483.00 ea.
• Totally enclosed fan/blower motors.
LP Conversion
Kit Available.
KIMBERLY — CORPORATE OFFICE • 800-444-0101 • www.designair.com • http://buynow.designair.com
MILWAUKEE
800-569-3389
800-494-4259
800-677-0213
MADISON
888-535-5595
800-677-0223
GREEN BAY
800-444-1798
800-677-0233
WAUSAU
888-363-4779
800-365-0243
LA CROSSE
800-677-0253
ROCKFORD, IL
800-462-1541
IRON MOUNTAIN, MI
800-490-4904
Design Air, a division of U.S. Venture, Inc.
Prices effective SEPTEMBER - NOVEMBER 2014 only and subject to change without notice.
1010 W. Kennedy Ave., Kimberly, WI 54136
TAKE THE CHILL OUT OF YOUR GARAGE OR WORKSPACE WITH A

Prices Good September 1 - November 30, 2014

Transcription

Similar documents

Stera Sheen and Urn Clean

Line Card - Enterprise Electronic Sales

Rundle-Spence * Pheasant Flush February 5, 2016

holiday - Drapery Connection

Silhouette® Window Shadings

Danze Faucets Stock List

Brochure Slide Presentation - Interglobal Forwarders Inc

Manufacturing Trends 2012 -2013

Vetus Cowl Vent Sizes and Specifications