MicroBoost ™ MICROMIX Liquid for Corn
Transcription
MicroBoost ™ MICROMIX Liquid for Corn
MicroBoost ™ MICROMIX Liquid for Corn APPLICATION INSTRUCTIONS MicroBoost™ MICROMIX Liquid can be applied in-furrow, pop-up, or foliar (center pivot injection, ground, or aerial) with water or NPK fertilizers. RATE of APPLICATION 1-2 Quarts per Acre Increased application rates may be advantageous in high-yielding environments. Crop may benefit from a split application at the 2-quart rate. MicroBoost™ MICROMIX is specifically designed for optimal agronomic and economic performance. Rates are crop specific based upon yield goals. Reference the chart on this page for use rates and application options. COMPATIBILITY MicroBoost™ MICROMIX is completely compatible with phosphate-containing fertilizers. It can be tank mixed with solutions containing no more than 30% ammonium thiosulfate or potassium thiosulfate by volume. MicroBoost™ MICROMIX can also be tank mixed and applied with glyphosate and/or other pesticides, herbicides, fungicides and insecticides if not prohibited by the pesticide label. (When tank mixing with pesticides always read and follow label instructions including tank mix order.) Always conduct a jar test for compatibility before applying. This product provides comprehensive micronutrient ratios. Do not add additional micronutrients to the MicroBoost™ MICROMIX containing solution. Store at 32°F (0°C) or above. MicroBoost™ MICROMIX for Corn Manufactured for: Max Systems LLC 84647 Dun Road, Norfolk, NE 68701 www.maxsystemsag.com Made in the U.S.A. CORN APPLICATION OPTIONS SINGLE APPLICATION IN-FURROW/BANDED (2X2) 1-2 Qts/Acre Apply one to two quarts per acre with NPK at planting FOLIAR 1 Qt/Acre Apply one quart per acre prior to growth stage V6 SEQUENTIAL APPLICATION SPLIT 2 Qts/Acre Apply one quart per acre with NPK at planting in furrow or 2x2 at planting plus one quart per acre as a foliar between growth stage V7 and V12 Guaranteed Analysis Calcium (Ca)........................................................ 1.70% 1.70% Chelated Calcium (Ca) Magnesium (Mg).................................................. 0.35% 0.35% Chelated Magnesium (Mg) Boron (B)................................................................ 0.10% Copper (Cu)......................................................... 0.25% 0.25% Chelated Copper (Cu) Iron (Fe)................................................................. 1.80% 1.80% Chelated Iron (Fe) Manganese (Mn)................................................. 0.50% 0.50% Chelated Manganese (Mn) Zinc (Zn)................................................................. 2.30% 2.30% Chelated Zinc (Zn) Organic brown sugar........................................ 5.255% Humic with carbon.............................................. 2.00% Inert Ingredients................................................ 85.745% *Micro Nutrients derived from the following sources: Calcium EDTA, Magnesium EDTA, Sodium Borate, Copper EDTA, Iron HEDTA, Manganese EDTA and Zinc EDTA and Sugar Cane Extract, and Organic Humic with carbon Foliar applications produce the best results when plants are fully hydrated. Apply MicroBoost™ MICROMIX MicroBoost ™ MICROMIX Liquid for Corn Foundational Secondary and Micronutrient Fertilizer Mix Mix of Seven Essential Secondary and Mirconutrients of use on CORN. Guaranteed Analysis Calcium (Ca).................................................1.70% 1.70% Chelated Calcium (Ca) Magnesium (Mg)............................................0.35% 0.35% Chelated Magnesium (Mg) Boron (B).........................................................0.10% Copper (Cu)...................................................0.25% 0.25% Chelated Copper (Cu) Iron (Fe)..........................................................1.80% 1.80% Chelated Iron (Fe) Manganese (Mn)...........................................0.50% 0.50% Chelated Manganese (Mn) Zinc (Zn)..........................................................2.30% 2.30% Chelated Zinc (Zn) Organic brown sugar...................................5.255% Humic with carbon.........................................2.00% Inert Ingredients..........................................85.745% *Micro Nutrients derived from the following sources: Calcium EDTA, Magnesium EDTA, Sodium Borate, Copper EDTA, Iron HEDTA, Manganese EDTA and Zinc EDTA and Sugar Cane Extract, and Organic Humic with carbon Store at 32°F (0°C) or above. Made in the U.S.A. 2 x 2.5 GALLON JUG / 250 GALLON SHUTTLE The liquid formulation is 100% EDTA or HEDTA chelated (except boron) for easy mixing, even distribution and consistent, uniform delivery of secondary and micronutrients to each plant. It provides a synergistic, comprehensive and plant-available blend to complement a liquid NPK fertilizer program. MicroBoost™ MICROMIX is not designed for soil correction. Secondary nutrient minimum guarantees vary state by state. Information regarding the contents and levels of metals in this product is available at www.aapfco.org/metals.htm WARNING: Some crops may be injured by application of boron. This product contains added boron and must be used only according to the manufacturer’s directions. Use of this fertilizer on any crop(s) other than those recommended may result in serious injury to the crop. MicroBoost’s™ unique formulation of ingredients (including boron) accommodates safe in-furrow application at label rates. Soybeans require standard seed safety precautions. Do not mix MicroBoost™ with methylated seed oil (MSO), crop oil concentrate (C)C) or oil-based pesticide, as it MAY RESULT IN LEAF BURN. MicroBoost™ MICROMIX for Corn Manufactured for: Max Systems LLC 84647 Dun Road | Norfolk, NE 68701 www.maxsystemsag.com NET WT. 9.93 POUNDS PER GALLON
Similar documents
Global Chelated-Iron Agricultural Micronutrient Market is Expected to Grow US$51.4 Mn by 2020 : PMR
The global chelated iron agricultural micronutrient market is mainly driven by factors such as upgraded farming practices in emerging markets, which require effective fertilizers that are enriched with micronutrients to provide the best results. However, restraints include high product price and fluctuating economic conditions, resulting into uneven demand-supply, which ultimately affects the supply chain.
More information