Document 6590249

Transcription

Document 6590249
भारतीय प्रौद्योगिकी सस्ं थान खड़गपरु
Indian Institute of Technology Kharagpur
सैद्धांतिक अध्ययन केंद्र / Centre for Theoretical studies
ANNEXURE-I
Rack Mount Server: Quantity 1
Components
Minimum Required Specification
Memory
4 x AMD Opteron Processor 6300 series (16core/2.5Ghz. or higher/16M L3
cache)
OEM Motherboard support AMD-6300 Processor Family with all necessary
component
115W (TDP) 2.5Ghz, 8MB L2 Cache or higher
1 TB DDR3 1600 MHz ECC RDIMM expandable upto 2 TB / higher
Hard Disk Drives
Support for HDD Types
32 TB, 10000 rpm Hot-swappable SAS HDD (capable of max 8 HDDs/higher)
Hot plug, SAS / SATA, Nearline SAS and SSD
RAID Controller
SAS controller with supporting RAID 0,1,5,10 / higher with 1GB cache
Optical disk Drive
DVD + RW Drive
PCI Slots
At least 6 PCIe slots (a combination of x4 and x8 G2 slots preferable)
Network interface
Minimum 2 integrated autosense 10/100/1000 Mbps Ethernet ports
with failover
Ports
1 Serial, 2 PS/2, 2 NIC, DVI/D-Sub, 6 USB : at least (2) ports up front
Power Supplies
1+1 high efficiency RPS of at least 1100 Watts or higher
Fans
At least 6 hot-plug fans in redundancy
Chassis
2U/higher Rack mount tool-less chassis with sliding rails
Remote Management
To be supplied as standard with dedicated Management port
Processor
Motherboard
Performance
Monitor + Keyboard
DDR3 memory; ECC;
hot-plug hard drives;
hot-plug redundant power supplies;
dual embedded NICs with failover and load balancing support;
integrated daughter card controller with battery-backed cache;
hot-plug redundant cooling; tool-less chassis;
fiber and SAS cluster support;
OEM brand 22 inch LED monitor, USB Keyboard & Mouse
Operating System
Red Hat Enterprise Linux 6.5 / CentOs Server 6.5
Availability
Systems Management
Form Factor
Warranty
OEM Server Management Tool properly configure to get max. output,
Vendor should configure queue, disk quota, AMD core Math library etc.
The server will be rack mountable with all necessary rail kits, 42U rack and
accessories. The server will be operated through KVM switch (8 port PS2 USB
Combo) fitted in the rack. All necessary accessories, rack, cables for mounting
and connecting the server must be supplied along with the server. The
supplier must fit the server in the rack.
5 years comprehensive onsite warranty
ANNEXURE - II
GENERAL TERMS AND CONDITIONS