3 Quante BSTG Block ™

Transcription

3 Quante BSTG Block ™
3
Quante™ BSTG Block
The BSTG block is a modular solution
block for MDF applications. These
blocks are suitable for both line side
and exchange side in the main
distribution frame.
The 16 mm (0.63 in.) pitch between
STG connection modules contributes
to the compact design of the BSTG
block. For instance, 1600 pairs can be
installed on a 2.6 m (8.5 ft.) vertical.
Equipment cable is routed inside the
backmount frame.
The blocks are equipped with STG
range of multipurpose connection
modules with the following facilities:
• Connection/disconnection
• Test facility
• IDC modules with insertion tool
• Full range of single or multipair
protection plugs.
BSTG blocks offer all of the
advantages of the latest range of STG
modules:
• Cat. 5 transmission performance
• Very high connection density
• Fast cabling
• Completely protected IDC contacts
• Improved wire retention
• A wide range of possible
configurations of the blocks is
available
• Blocks with or without protection
facility
• Different labeling configurations
• Disconnection or connection
contacts available
• Optional contacts for stranded wires
(Please consult 3M.)
• Cat. 5 transmission performance
• Very compact 16 mm (0.63 in.) pitch
• 20 to 26 AWG wire
• Multiple reterminations
• High density
• Side or rear cable access
1
Cat.
(Communication
Circuit Accessory)
22H9
Also Classified by Underwriter
Laboratories, Inc. in accordance
with TIA/EIA 568-A, Cat.5 Transmission.
3M™ Quante™ BSTG Block
BSTG Block
C223090B0000-NA
C223111B0000-NA
BSTG Block
Product
Number
D
x
Dimensions
H x W x D mm (in.)
UPC
C223090B0000-NA
BSTG U 2 10, 100 pair
MDF block, without protection,
Cat. 5
176 x 146 x 87
(6.93 x 5.75 x 3.43)
05111512318
C223111B0000-NA
BSTG SOR CH C 2 10, 100 pair
176 x 146 x 87
MDF block, protected, Cat. 5
(6.93 x 5.75 x 3.43)
05111512319
H
W
Description
2
Each block is equipped with:
• 1 label holder
• 10 STG connection modules
• 1 backmount frame
STG Connection Modules
C223622A0000-NA
STG Modules
Product
Number
Dimensions
H x W x D mm (in.)
UPC
C223622A0000-NA
Connection module for
BMF STG U2 8 pair Cat. 5
126 x 14 x 50
(4.96 x .55 x 1.97)
05111512321
C223613A0000-NA
Connection module for
BMF STG U2 10 pair Cat. 5
146 x 14 x 50
(5.75 x .55 x 1.97)
05111512604
C223624B0000-NA
Disconnection module for
BMF STG U2 8 pair Cat. 5
126 x 14 x 50
(4.96 x .55 x 1.97)
05111512606
C223615B0000-NA
Disconnection module for
BMF STG C2 10 pair Cat. 5
146 x 14 x 50
(5.75 x .55 x 1.97)
05111512320
3
• Dark blue casing on red base
Description
STG Disconnection Modules
C223615B0000-NA
4
• Light blue casing on red base
Wall Mounted Frames for
STG Small Capacity MDF
C232280A0000-NA
C232281A0000-NA
Wall Mounted Frames for STG Small Capacity MDF
Product
Number
5
• Backmount frame
Description
Dimensions
H x W m (ft.)
UPC
C232280A0000-NA
Backmount frame
for STG, 10 pair
2x2
(6.56 x 6.56)
05111512322
C232281A0000-NA
Backmount frame
for STG, 8 pair
2x2
(6.56 x 6.56)
05111512323
3M™ Quante™ STG 2000 Modules
6
Description
Application in Network
STG 2000 is the lastest evolution of
STG range of connection modules.
This module offers Category 5
transmission performance as a
standard. As a result, this module can
be used in any modern network and is
fully compatible with a variety of
applications (xDSL, Pairgain™, etc.).
Termination is easy and cable jumpers
can be managed from the rear or from
the side.
• Suitable for high-density installation
(2400 pair single-sided crossconnection cabinets, 1600 pairs on
2.6 m (8.53 ft.) vertical MDF,
containerized exchanges, etc.)
• STG 2000 modules are suitable for
public telephony (MDF, crossconnection cabinets, building
distribution) as well as for private
telephony and high data rates
transmission
Reliability and Performance
3M’s straight IDC technology offers
outstanding performance:
• Multiple retermination with all kinds
of conductor gauges in the 0,8 to 0,4
mm (20 to 26 AWG) range
• Improved wire retention (in all
directions)
• Gas-tight connection area –
corrosion-proof
• Tin-lead plating on contacts avoids
corrosion
• Transmission performances meet
Cat. 5 (100 MHz)
• 2 wires can be accommodated in the
same slot
• Very compact design
• Specific contacts for stranded wires
upon request
• Category 5 as a standard
• Very compact size 14 mm (0.55 in.)
pitch
• 0,8 to 0,4 mm (20 to 26 AWG) wires
• Optional IDC’s for stranded wires
• Specific module with rear cable
termination
• Multiple reterminations
• Comprehensive range of protection
circuits and accessories
3M™ Quante™ STG 2000 Modules
Insulation Displacement Contacts IDC
Function and Accessories
STG U
STG C
STG O
STR M
STR P
(1)
(1)
Type of contact
Continuity
(normally closed circuit)
Normally opened circuit
Parallel test
Serial test
T-connection
(1)
Disconnection
Protection magazine
(2)
(2)
(2)
Single pair protection plugs
(3)
(3)
Multipair parallel test
Fuse protection
Transmission performance
Cat. 5
Cat. 5
(1) T-connection: two wires in the same slot
(2) Modules with grounding contacts
(3) Connection modules with grounding grid
Product Abbreviation Instructions
STG
type of module (STR= double-sided, STT= screen collector module)
C
type of circuit (C, U, O, M, P)
2
IDC
10
10 pairs (8 for 8 pairs)
P
contacts for automatic grounding (for protection magazine)
PU
grounding grid for single pair protection plugs
(Example: STG C2 10 P)
Cat. 5
Cat. 3
Cat. 3
3M™ Quante™ STG 2000 Modules
STG 2000 for Backmount Frames
Connection Modules
Light grey casing on light grey base
7
Connection Modules with
Multi-pair Protection Facility
Connection Modules with
Single-pair Protection Facility
Light grey casing on light grey base
Light grey casing on light grey base
10
13
C252806A0000-NA
C252807A0000-NA
C252808A0000-NA
• STG U2 8 marked from 1 to 8 on
jumper side
• STG U2 8 P marked from 1 to 8 on
jumper side
• STG2 U2 8 PU marked from 1 to 8
on jumper side
C252824A0000-NA
C252825A0000-NA
C252826A0000-NA
• STG U2 10 marked from 1 to 10 on
jumper side
• STG U2 10 P marked from 1 to 10
on jumper side
• STG2 U2 10 PU marked from 1 to
10 on jumper side
Disconnection Modules
Disconnection Modules
with Multi-pair Protection
Facility
Disconnection Modules with
Single-pair Protection
Facility
White casing on light grey base
8
White casing on light grey base
11
White casing on light grey base
14
C252800A0000-NA
C252801A0000-NA
C252802A0000-NA
• STG C2 8 marked from 1 to 8 on
jumper side
• STG2 C2 8 P marked from 1 to 8 on
jumper side
• STG2 C2 8 PU marked from 1 to 8
on jumper side
C252818A0000-NA
C252819A0000-NA
C252820A0000-NA
• STG C2 10 marked from 1 to 10 on
jumper side
• STG2 C2 10 P marked from 1 to 10
on jumper side
• STG2 C2 10 PU marked from 1 to
10 on jumper side
Switching Modules
Switching Modules with
Multi-pair Protection Facility
Switching Modules with
Single-pair Protection
Facility
Light blue casing on light grey base
Light blue casing on light grey base
Light blue casing on light grey base
9
12
15
C252812A0000-NA
C252813A0000-NA
C252814A0000-NA
• STG2 O2 8 marked from 1 to 8 on
jumper side
• STG2 O2 8 P marked from 1 to 8 on
jumper side
• STG2 O2 8 PU marked from 1 to 8
on jumper side
C252830A0000-NA
C252831A0000-NA
C252832A0000-NA
• STG2 O2 10 marked from 1 to 10 on
jumper side
• STG2 O2 10 P marked from 1 to 10
on jumper side
• STG2 O2 10 PU marked from 1 to
10 on jumper side
3M™ Quante™ STG 2000 Modules
STG 2000 for Backmount Frames
Product
Number
Description
Dimensions
H x W x L mm (in.)
UPC
Connection Modules
C252806A0000-NA
STG U2 8 marked from 1 to 8 on jumper side
113 x 15,9 x 50
(4.45 x 0.63 x 1.97)
05111512578
C252824A0000-NA
STG U2 10 marked from 1 to 10 on jumper side
133 x 15,9 x 50
(5.24 x 0.63 x 1.97)
05111512579
Disconnection Modules
C252800A0000-NA
STG C2 8 marked from 1 to 8 on jumper side
113 x 15,9 x 50
(4.45 x 0.63 x 1.97)
05111512580
C252818A0000-NA
STG C2 10 marked from 1 to 10 on jumper side
133 x 15,9 x 50
(5.24 x 0.63 x 1.97)
05111512581
Switching Modules
C252812A0000-NA
STG2 O2 8 marked from 1 to 8 on jumper side
113 x 15,9 x 50
(4.45 x 0.63 x 1.97)
05111512582
C252830A0000-NA
STG2 O2 10 marked from 1 to 10 on jumper side
133 x 15,9 x 50
(5.24 x 0.63 x 1.97)
05111512583
Connection Modules with Multi-pair Protection Facility
C252807A0000-NA
STG U2 8 P marked from 1 to 8 on jumper side
113 x 15,9 x 50
(4.45 x 0.63 x 1.97)
05111512584
C252825A0000-NA
STG U2 10 P marked from 1 to 10 on jumper side
133 x 15,9 x 50
(5.24 x 0.63 x 1.97)
05111512585
Disconnection Modules with Multi-pair Protection Facility
C252801A0000-NA
STG2 C2 8 P marked from 1 to 8 on jumper side
113 x 15,9 x 50
(4.45 x 0.63 x 1.97)
05111512586
C252819A0000-NA
STG2 C2 10 P marked from 1 to 10 on jumper side
133 x 15,9 x 50
(5.24 x 0.63 x 1.97)
05111512587
Switching Modules with Multi-pair Protection Facility
C252813A0000-NA
STG2 O2 8 P marked from 1 to 8 on jumper side
113 x 15,9 x 50
(4.45 x 0.63 x 1.97)
05111512588
C252831A0000-NA
STG2 O2 10 P marked from 1 to 10 on jumper side
133 x 15,9 x 50
(5.24 x 0.63 x 1.97)
05111512589
Connection Modules with Single-pair Protection Facility
C252808A0000-NA
STG2 U2 8 PU marked from 1 to 8 on jumper side
113 x 15,9 x 50
(4.45 x 0.63 x 1.97)
05111512590
C252826A0000-NA
STG2 U2 10 PU marked from 1 to 10 on jumper side
133 x 15,9 x 50
(5.24 x 0.63 x 1.97)
05111512591
Disconnection Modules with Single-pair Protection Facility
C252802A0000-NA
STG2 C2 8 PU marked from 1 to 8 on jumper side
113 x 15,9 x 50
(4.45 x 0.63 x 1.97)
05111512592
C252820A0000-NA
STG2 C2 10 PU marked from 1 to 10 on jumper side
133 x 15,9 x 50
(5.24 x 0.63 x 1.97)
05111512593
Switching Modules with Single-pair Protection Facility
C252814A0000-NA
STG2 O2 8 PU marked from 1 to 8 on jumper side
113 x 15,9 x 50
(4.45 x 0.63 x 1.97)
05111512594
C252832A0000-NA
STG2 O2 10 PU marked from 1 to 10 on jumper side
133 x 15,9 x 50
(5.24 x 0.63 x 1.97)
05111512595
3M™ Quante™ STG 2000 Modules
STG 2000 for 3M and QSA Backmount Frames
Connection Modules
Light grey casing on light grey base
Connection Modules with
Multi-pair Protection Facility
16
Light grey casing on light grey base
18
C252809A0000-NA
C252810A0000-NA
• STG U2 K8 marked from 1 to 8 on
jumper side
• STG U2 K8 P marked from 1 to 8 on
jumper side
C252827A0000-NA
C252828A0000-NA
• STG U2 K10 marked from 1 to 10 on
jumper side
• STG U2 K10 P marked from 1 to 10
on jumper side
Disconnection Modules
Disconnection Modules with
Multi-pair Protection Facility
White casing on light grey base
17
White casing on light grey base
19
C252803A0000-NA
C252804A0000-NA
• STG C2 K8 marked from 1 to 8 on
jumper side
• STG2 C2 K8 P marked from 1 to 8
on jumper side
C252821A0000-NA
C252822A0000-NA
• STG C2 K10 marked from 1 to 10 on
jumper side
• STG2 C2 K10 P marked from 1 to 10
on jumper side
3M™ Quante™ STG 2000 Modules
STG 2000 for Backmount Frames
Product
Number
Description
Dimensions
H x W x L mm (in.)
UPC
Connection Modules
C252809A0000-NA
STG U2 K8 marked from 1 to 8 on jumper side
126 x 14 x 50
(4.96 x 0.55 x 1.97)
05111512596
C252827A0000-NA
STG U2 K10 marked from 1 to 10 on jumper side
146 x 14 x 50
(5.75 x 0.55 x 1.97)
05111512597
Disconnection Modules
C252803A0000-NA
STG C2 K8 marked from 1 to 8 on jumper side
126 x 14 x 50
(4.96 x 0.55 x 1.97)
05111512598
C252821A0000-NA
STG C2 K10 marked from 1 to 10 on jumper side
146 x 14 x 50
(5.75 x 0.55 x 1.97)
05111512599
Connection Modules with Multi-pair Protection Facility
C252810A0000-NA
STG U2 K8 P marked from 1 to 8 on jumper side
126 x 14 x 50
(4.96 x 0.55 x 1.97)
05111512600
C252828A0000-NA
STG U2 K10 P marked from 1 to 10 on jumper side
146 x 14 x 50
(5.75 x 0.55 x 1.97)
05111512601
Disconnection Modules with Multi-pair Protection Facility
C252804A0000-NA
STG2 C2 K8 P marked from 1 to 8 on jumper side
126 x 14 x 50
(4.96 x 0.55 x 1.97)
05111512602
C252822A0000-NA
STG2 C2 K10 P marked from 1 to 10 on jumper side
146 x 14 x 50
(5.75 x 0.55 x 1.97)
05111512603
3M™ Quante™ STG Modules
STT and STR Modules for
Backmount Frames
STG CLASSIC for Backmount Frames
Connection Modules
Disconnection Modules
Modules with Grounding by
Means of a Cord
Dark blue casing on red base
20
Light blue casing on red base
23
C223622A0000-NA
C223624B0000-NA
• STG U2 8 Cat. 5
• STG C2 8 Cat. 5
C223613B0000-NA
C223615B0000-NA
• STG U2 10 Cat. 5
• STG C2 10 Cat. 5
C223850A0000-NA
C223848B0000-NA
• STG U2 10 Cat. 5 marked from
1 to 10 jumper side
• STG C2 10 Cat. 5 marked 1 to 10
jumper side
Connection Modules with
Multi-pair Protection Facility
Disconnection Modules with
Multi-pair Protection Facility
Grounding Modules (All
Contacts are Shunted)
Dark blue casing on red base
Light blue casing on red base
Modules with automatic grounding
(red casing on red base)
21
Red casing on red base
25
C223656A0000-NA
• STT G2 8
C223657A0000-NA
• STT G2 10
24
C223725B0000-NA
C223721B0000-NA
C223640A0000-NA
• STG U2 8 P Cat. 5
• STG C2 8 P Cat. 5
• STT G2 8
C223669A0000-NA
C223718B0000-NA
C223641A0000-NA
• STG U2 8 P Cat. 5 marked from
1 to 8 jumper side
• STG C2 8 P Cat. 5 marked from
1 to 8 jumper side
• STT G2 10
C223724B0000-NA
C223720B0000-NA
• STG U2 10 P Cat. 5
• STG C2 10 P Cat. 5
C223679A0000-NA
C223716B0000-NA
• STG U2 10 P Cat. 5 marked from
1 to 10 jumper side
• STG C2 10 P Cat. 5 marked from
1 to 10 jumper side
26
STR M T-Connection Modules
STR M Modules with
Disconnection at Front Side
Disconnection Modules with
Single-pair Protection Facility
Light blue casing on dark blue base
27
C220617A0000-NA
• STR M2 8
C220609A0000-NA
Light blue casing on red base
22
• STR M2 10
C223672B0000-NA
C220608A0000-NA
• STG C2 8 PU Cat. 5
• STR M2 10STR M2 10 pair marked
from 1 to 0 on jumper side
C223600B0000-NA
• STG C2 10 PU Cat. 5 from 1 to 10
jumper side
3M™ Quante™ STG CLASSIC for Backmount Frames
Product
Number
Description
Dimensions
H x W x L mm (in.)
UPC
126 x 14 x 50 (4.961 x 0.551 x 1.969)
05111512321
Connection Modules
C223622A0000-NA
STG U2 8 pair Cat. 5
C223613B0000-NA
STG U2 10 pair Cat. 5
146 x 14 x 50 (5.748 x 0.551 x 1.969)
05111512604
C223850A0000-NA
STG U2 10 pair Cat. 5
marked from 1 to 10 jumper side
146 x 14 x 50 (5.748 x 0.551 x 1.969)
05111512605
Disconnection Modules
C223624B0000-NA
STG C2 8 pair Cat. 5
126 x 14 x 50 (4.961 x 0.551 x 1.969)
05111512606
C223615B0000-NA
STG C2 10 pair Cat. 5
146 x 14 x 50 (5.748 x 0.551 x 1.969)
05111512320
C223848B0000-NA
STG C2 10 pair Cat. 5
marked 1 to 10 jumper side
146 x 14 x 50 (5.748 x 0.551 x 1.969)
05111512607
Disconnection Modules with
Single-pair Protection Facility
C223672B0000-NA
STG C2 8 pair PU Cat. 5
126 x 14 x 50 (4.961 x 0.551 x 1.969)
05111512608
C223600B0000-NA
STG C2 10 pair PU Cat. 5
146 x 14 x 50 (5.748 x 0.551 x 1.969)
05111512609
Connection Modules with
Multi-pair Protection Facility
C223725B0000-NA
STG U2 8 pair Cat. 5
126 x 14 x 50 (4.961 x 0.551 x 1.969)
05111512610
C223669A0000-NA
STG U2 8 pair Cat. 5
marked from 1 to 8 jumper side
126 x 14 x 50 (4.961 x 0.551 x 1.969)
05111512611
C223724B0000-NA
STG U2 10 pair Cat. 5
146 x 14 x 50 (5.748 x 0.551 x 1.969)
05111512612
C223679A0000-NA
STG U2 10 pair Cat. 5
marked from 1 to 10 jumper side
146 x 14 x 50 (5.748 x 0.551 x 1.969)
05111512613
Disconnection Modules with
Multi-pair Protection Facility
C223721B0000-NA
STG C2 8 pair Cat. 5
126 x 14 x 50 (4.961 x 0.551 x 1.969)
05111512614
C223718B0000-NA
STG C2 8 pair Cat. 5
marked from 1 to 8 jumper side
126 x 14 x 50 (4.961 x 0.551 x 1.969)
05111512615
C223720B0000-NA
STG C2 10 pair Cat. 5
146 x 14 x 50 (5.748 x 0.551 x 1.969)
05111512616
C223716B0000-NA
STG C2 10 pair Cat. 5
marked from 1 to 10 jumper side
146 x 14 x 50 (5.748 x 0.551 x 1.969)
05111512617
3M Quante STT and STR Modules for Backmount Frames
Product
Number
Description
Dimensions
H x W x L mm (in.)
UPC
Grounding Modules
C223640A0000-NA
STT G2 8 pair
126 x 14 x 50 (4.961 x 0.551 x 1.969)
05111512618
C223641A0000-NA
STT G2 10 pair
146 x 14 x 50 (5.748 x 0.551 x 1.969)
05111512619
Modules with Grounding by Means of a Cord
C223656A0000-NA
STT G2 8 pair
126 x 14 x 50 (4.961 x 0.551 x 1.969)
05111512620
C223657A0000-NA
STT G2 10 pair
146 x 14 x 50 (5.748 x 0.551 x 1.969)
05111512621
STR M T-Connection Modules STR M
Modules with Disconnection at Front Side
C220617A0000-NA
STR M2 8 pair
126 x 14 x 61 (4.961 x 0.551 x 2.402)
05111512622
C220609A0000-NA
STR M2 10 pair
146 x 14 x 61 (5.748 x 0.551 x 2.402)
05111512623
C220608A0000-NA
STR M2 10STR M2 10 pair marked
from 1 to 10 on jumper side
146 x 14 x 61 (5.748 x 0.551 x 2.402)
05111512624
3M™ Quante™ STG 2000
Protection Solutions
Protection solutions for STG are
composed of multi-pair protection
magazines as well as a complete range
of single-pair protection plugs.
Protection Magazine
Front facing magazines suitable for all
IDC STG connection modules and
BSTG modular blocks, with the
relevant protection facilities.
Automatic grounding through the
backmount frame/5 kA drain current
capacity.
Magazine with earth cord for
upgrading standard connection
modules or blocks with protection.
Single-pair Protection Plugs
This range of single-pair protection
modules is designed to increase
flexibility in network management.
Protection can be removed separately
only on faulty lines.
Wide range of protection circuits from
standard overvoltage protection,
overvoltage and current protection
and fast 5-pole protection.
A disconnection access on the
protection plugs allows the user to use
all STG disconnection and test
accessories without removing
protection.
• 1 circuit = 1 color
• Single-pair protection modules are
suitable for the standard 16 mm
(0.059 in.) pitch
28
• Comprehensive range of protection
• Fast 5-pole protection
• Compact design
• Automatic grounding
3M™ Quante™ STG 2000 Protection Solutions
Protection Magazines
Magazine for STG/BSTG
with Protection Facility
C233725B0000-NA
C233726B0000-NA
Magazines with 0,3 m
(9.843 ft.) Grounding Cord
(For Standard STG/BSTG
without Protection Facility)
C233727C0000-NA
Single-pair Protection Plugs
• Single-pair protection plugs for STG
with grounding grid (STG PU) with
test and disconnection facility
C233796A0000-NA
cable
side
33
29
30
• 10 pair magazine without arresters
• 8 pair magazine without arresters
C233736B0000-NA
C233728B0000-NA
• 8 pair magazine equipped with 250V
arresters with fail safe
• 10 pair magazine without arresters
C233740B0000-NA
• 10 pair magazine equipped with
250V arresters with fail safe
C233737B0000-NA
• 8 pair magazine equipped with 350V
arresters with fail safe
C233741B0000-NA
• 10 pair magazine equipped with
350V arresters with fail safe
• Overvoltage protection plug 250V
(grey) SOR PU 1C
C233797A0000-NA
C233744B0000-NA
• 8 pair magazine equipped with 250V
arresters with fail safe
34
• Overvoltage protection plug 250V
(orange) SOR PU 2C
C233748B0000-NA
• 10 pair magazine equipped with
250V arresters with fail safe
C233798A0000-NA
C233745B0000-NA
• 8 pair magazine equipped with 350V
arresters with fail safe
35
C233749B0000-NA
• Fast-5 pole overvoltage protection
plug (yellow) SOR PU 3C
• 10 pair magazine equipped with
350V arresters with fail safe
C233799A0000-NA
Surge Arresters for
Protection Magazine and
Tool
36
• Fast-5 pole overvoltage protection
plug (brown) SOR PU 4C
C231039A0000-NA
C222037B0000-NA
37
31
• 3-pole arresters with fail safe 250V
C231040A0000-NA
32
• 3-pole arresters with fail safe 350V
C222053A0000-NA
• Combined insertion/extraction tool
for protection magazine
• Current protection - 2 fuses (1.25
Amp at 250V)
jumpe
side
3M™ Quante™ STG 2000 Protection Solutions
Protection Magazines and Accessories
Product
Number
Description
UPC
Magazine for STG/BSTG with Protection Facility
C233725B0000-NA
Magazine for STG/BSTG, with protection
05111512521
C233726B0000-NA
10 pair magazine without arresters
05111512522
C233736B0000-NA
8 pair magazine equipped with 250V arresters with fail safe
05111512523
C233740B0000-NA
10 pair magazine equipped with 250V arresters with fail safe
05111512524
C233737B0000-NA
8 pair magazine equipped with 350V arresters with fail safe
05111512525
C233741B0000-NA
10 pair magazine equipped with 350V arresters with fail safe
05111512526
Magazines with 0,3 m Grounding Cord
(For Standard STG/BSTG without Protection Facility)
C233727C0000-NA
8 pair magazine with ground wire without arresters
05111512527
C233728B0000-NA
10 pair magazine with ground wire without arresters
05111512528
C233744B0000-NA
8 pair magazine equipped with 250V arresters with fail safe
05111512529
C233748B0000-NA
10 pair magazine equipped with 250V arresters with fail safe
05111512530
C233745B0000-NA
8 pair magazine equipped with 350V arresters with fail safe
05111512531
C233749B0000-NA
10 pair magazine equipped with 350V arresters with fail safe
05111512532
Surge Arresters for Protection Magazine and Tool
C231039A0000-NA
3 pole arresters with fail safe 250V
05111512341
C231040A0000-NA
3 pole arresters with fail safe 350V
05111512342
C222053A0000-NA
Combined insertion/extraction tool for protection magazine
05111512533
Single-pair Protection Plugs
C233796A0000-NA
Overvoltage protection plug 250V (grey) SOR PU 1C
05111512534
C233797A0000-NA
Overvoltage protection plug 250V (orange)
SOR PU 2C
05111512535
C233798A0000-NA
Fast 5-pole overvoltage protection plug (yellow)
SOR PU 3C
05111512536
C233799A0000-NA
Fast 5-pole overvoltage protection plug (brown)
SOR PU 4C
05111512537
C222037B0000-NA
Current protection – 2 fuses (1.25 Amp at 250V)
05111512538
3M™ Quante™ STG 2000 Test Accessories
Disconnection Plugs
C222909A0000-NA
PCB Type Patch Cords
C222024B0000-NA
Label-Holder (To be Clipped
onto Backmount Frame)
C220673B0000-NA
38
42
• Disconnection plugs (red)
45
Serial Display Plug, 1 per
Network Line
C242628A0000-NA
• 4-wire cord, 3 m (9.843 ft.)
• Base 8 pairs, numbered 1 to 8
C222025B0000-NA
• 2-wire cord, 3 m (9.843 ft.)
39
PCB Type Test Cords
C222048B0000-NA
C220674B0000-NA
• Base 10 pairs, numbered 1 to 10
C242612A0000-NA
• 2-wire cord, 2 m (6.562 ft.)
P29320F50000-NA
• 2-wire cord, 1 m (3.281 ft.)
Test Cords with Plugs
MPA025DB0000-NA
Swivelling Label-Holders
(Not Compatible with Patch
Cords and Wire-Wrap
Modules)
C222950A0000-NA
40
• Parallel test cord, 2 wires, 3 m
(9.843 ft.) with banana plugs
46
43
C222014B0000-NA
• Serial test cord, 4 wires, 3 m (9.843
ft.) with banana plugs
Multiple Parallel Test Plug
C222058A0000-NA
• Base 8 pairs
• Serial test cord, 4 wires, 1.5 m
(4.921 ft.) with plugs
C222951A0000-NA
MPA025EB0000-NA
• Base 10 pairs
• 4 wire cord, 1.5 m (4.921 ft.) with
plugs
Test Cords and CKD Test
Plugs
M004724A0000-NA
Parallel Test Plug for RJ 11
Connector
MPA0781A0000-NA
41
• 8 pair, test plug
C222059A0000-NA
47
44
• 10 pair, test plug
Label-Holders
C222903A0000-NA
• Parallel test cord, 3 m (9.843 ft.)
• Side label-holders with blank labels
(space for 3 digits)
• Serial test cord, 3 m (9.843 ft.)
C222918A0000-NA
• Side label holders with marked labels
from 000 to 100
M004723A0000-NA
M004725A0000-NA
• Serial test plug (CKD)
M004726A0000-NA
• Parallel test plug (CKD)
3M™ Quante™ STG Test Accessories
STG 2000 Test Accessories
Product
Number
Description
UPC
Disconnection Plugs
C222909A0000-NA
Disconnection plugs (red)
05111512539
C242628A0000-NA
Serial display plug, 1 per network line
05111512540
PCB Type Test Cords
C222048B0000-NA
Parallel test cord, 2 wires, 3 m (9.84 ft.) with banana plugs
05111512541
C222014B0000-NA
Serial test cord, 4 wires, 3 m (9.84 ft.) with banana plugs
05111512542
Multiple Parallel Test Plug
C222058A0000-NA
8 pair, test plug
05111512543
C222059A0000-NA
10 pair, test plug
05111512544
PCB Type Patch Cords
C222024B0000-NA
4-wire cord, 3 m (9.84 ft.)
05111512545
C222025B0000-NA
2-wire cord, 3 m (9.84 ft.)
05111512546
C242612A0000-NA
2-wire cord, 2 m (6.562 ft.) (single-sided PCB)
05111512547
P29320F50000-NA
2-wire cord, 1 m (3.281 ft.) (single-sided PCB)
05111512548
Test Cords with Plugs
MPA025DB0000-NA
Serial test cord, 4-wires, 1.5 m (4.921 ft.) with plugs
05111512549
MPA025EB0000-NA
4-wire cord, 1.5 m (4.921 ft.) with plugs
05111512550
MPA0781A0000-NA
Parallel test plug for RJ 11 connector
05111512551
C222903A0000-NA
Side label-holders with blank labels (space for 3 digits)
05111512552
C222918A0000-NA
Side label-holders with marked labels from 0 to 100
05111512553
C220673B0000-NA
Base 8 pairs, numbered 1 to 8
05111512554
C220674B0000-NA
Base 10 pairs, numbered 1 to 8
05111512555
Label-Holders
Label-Holder
Bag of 10 Swiveling Label-Holders
C222950A0000-NA
Base 8 pairs
05111512556
C222951A0000-NA
Base 10 pairs
05111512557
Test Cords and CKD Test Plugs
M004724A0000-NA
Parallel test cord, 3 m (9.84 ft.)
05111512558
M004723A0000-NA
Serial test cord, 3 m (9.84 ft.)
05111512559
M004725A0000-NA
Serial test plug (CKD)
05111512560
M004726A0000-NA
Parallel test plug (CKD)
05111512561
3M™ Quante™ STG Test Accessories
Marking Accessories
Dust Covers
Insertion Tools
C234030A0000-NA
51
49
48
C222920A0000-NA
Compatible with all modules with or
without the protection magazines
• IDC Insertion Hand Tool
• Black
C222955A0000-NA
C234037A0000-NA
C222921A0000-NA
• Grey
• 8-pair modules or blocks
Length: 2 m (6.562 ft.)
• IDC Insertion Hand Tool for QP,
LSA and SIEMENS IDC
C222922A0000-NA
C222956A0000-NA
C234043A0000-NA
• Red
• 10-pair modules or blocks
Length: 2 m (6.562 ft.)
• Set of 10 spare blades for IDC tool
C222961A0000-NA
Termination Support Device
MPA078BA0000-NA
C222923A0000-NA
• Yellow
C222924A0000-NA
• For modules or blocks, 50 pairs
Length: 2 m (6.562 ft.)
• Blue
C222963A0000-NA
MPA078OA0000-NA
C222925A0000-NA
• For modules or blocks, 100 pairs
Length: 2 m (6.562 ft.)
• Base 10 pair
• Green
C222917A0000-NA
• Bag of 100 marking caps marked 0
to 9 (black digits)
Miscellaneous
C223765A0000-NA
50
• 2 wire-guide channels for 8-pair
modules (to be clipped on both sides
of the modules)
• Base 8 pair
3M™ Quante™ STG Test Accessories
STG Test Accessories
Product
Number
Description
UPC
Marking Accessories
C222920A0000-NA
Marking caps, marked 0 to 9 (black)
05111512563
C222921A0000-NA
Marking caps, marked 0 to 9 (grey)
05111512564
C222922A0000-NA
Marking caps, marked 0 to 9 (red)
05111512565
C222923A0000-NA
Marking caps, marked 0 to 9 (yellow)
05111512566
C222924A0000-NA
Marking caps, marked 0 to 9 (blue)
05111512567
C222925A0000-NA
Marking caps, marked 0 to 9 (green)
05111512568
C222917A0000-NA
Marking caps, marked 0 to 9 (black digits)
05111512569
C222955A0000-NA
For 8 pair modules or blocks, length: 2 m (6.562 ft.)
05111512570
C222956A0000-NA
For 10 pair modules or blocks, length: 2 m (6.562 ft.)
05111512571
C222961A0000-NA
For modules or blocks, 50 pair, length: 2 m (6.562 ft.)
05111512572
C222963A0000-NA
For modules or blocks, 100 pair, length: 2 m (6.562 ft.)
05111512573
2 wire-guide channels for 8-pair modules
(to be clipped on both sides of the modules)
05111512574
C234030A0000-NA
IDC insertion hand tool
05111512310
C234037A0000-NA
IDC insertion hand tool for QP, LSA and SIEMENS IDC
05111512317
C234043A0000-NA
Set of 10 spare blades for IDC tool
05111512575
Dust Covers
Miscellaneous
C223765A0000-NA
Insertion Tools
Termination Support Device
MPA078BA0000-NA
Base 8 pair
05111512576
MPA078OA0000-NA
Base 10 pair
05111512577
3M™ Quante™ BMS/BDS Secondary
Cross-Connection Box
BMS and BDX boxes are fully
equipped secondary distribution boxes
for the outside plant. These boxes are
mainly used in pole or wall mount
applications.
BMS box is based on BMX
distribution point as BDS is based on
BDX multipurpose box for outside
plant. These boxes are equipped with
STS connection modules. For all
technical features or description,
please refer to BMX and BDX pages.
BMS / BDS are offering all the
accessories (strain relief devices, earth
post). Optional locks can be ordered
separately.
52
• Comprehensive range from 10 to 100
pairs
• STS Cat. 5 connection modules.
54
53
Dimensions mm (in.)
H
L
D
BMS 50
213 (8.4)
240 (9.4)
73 (2.9)
BMS 100
320 (12.6)
240 (9.4)
73 (2.9)
BDS 50
292 (11.5)
255 (10.1)
86 (3.4)
BDS 100
400 (15.7)
255 (10.1)
86 (3.4)
3M™ Quante™ BMS/BDS Secondary
Cross-Connection Box
Boxes Equipped
with Modules
C210601A0000-NA
C210604A0000-NA
• BMS STS S2 50 box fitted with five
10 pair modules
(no disconnection but test)
C210602A0000-NA
• BMS STS C2 100 box fitted with ten
10 pair modules
(disconnection and test)
55
C210605A0000-NA
• BMS STS S2 100 box fitted with ten
10 pair modules
(no disconnection but test)
56
• BMS STS C2 50 box fitted with five
10 pair modules
(disconnection and test)
Empty Boxes for Modules
C210606A0000-NA
• BMS 50 FOR STS box fitted with
the structure to accommodate five
10 pair modules (screws supplied)
C210607A0000-NA
• BMS 100 FOR STS box fitted with
the structure to accommodate ten 10
pair modules (screws supplied)
Outdoor distribution boxes
• 50 pairs STS C2 10 (disconnection
modules) box without lock, with
gaskets (PI 55), with cable clamps
BDS T1B ETR C2 50
• 100 pairs STS C2 10 (disconnection
modules) box without lock, with
gaskets (PI 55), with cable clamps
BDS T2B ETR C2 100
All other possible configurations are
available. Please consult 3M.
BMS/BDS Secondary Cross-Connection Box
Product
Number
Description
UPC
N541081A0000-NA
BPEO 1 CDP branch closure with 2 each 5 mm (0.2 in.) trays
05111512702
N501349A0000-NA
BPEO 1 CDP branch closure with 2 each 10 mm (0.4 in.) trays
05111512703
N501350A0000-NA
BPEO 1 FDP branch closure with 2 each 5 mm (0.2 in.) trays
05111512704
N501351A0000-NA
BPEO 1 FDP branch closure with 2 each 10 mm (0.4 in.) trays
05111512705
C210601A0000-NA
BMS STS C2 50 box W/5 10 pair MOD
05111512706
C210604A0000-NA
BMS STS S2 50 box W/5 10 pair MOD
05111512707
C210602A0000-NA
BMS STX C2 100 box W/0 10 pair MOD
05111512708
C210605A0000-NA
BMS STS S2 100 box W/10 10 pair MOD
05111512709
C210606A0000-NA
BMS 50 for STS empty box F/5 10 pair MOD
05111512710
C210607A0000-NA
BMS 100 for STS empty box F/10 10 pair MOD
05111512711
3M and Quante are trademarks of 3M.
Category 5 and Cat. 5 reference the specification defined
by ANSI/TIA/EIA-568-A.
Important Notice
Before using this product, you must evaluate it and determine if it is
suitable for your intended application. You assume all risks and
liability associated with such use.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for
a period of one year from the date of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. If this product is defective within the warranty
period stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of the
3M product. Except where prohibited by law, 3M will not be liable for
any loss or damage arising from this 3M product, whether direct,
indirect, special, incidental or consequential regardless of the legal
theory asserted.
3
Telecommunications
6801 River Place Blvd.
Austin, TX 78726-9000
800/426 8688
FAX 800/626 0329
www.3M.com/telecom
Litho in USA. © 3M IPC 2001
XA-0060-0402-3