PMT MOUNTING DESCRIPTION

Transcription

PMT MOUNTING DESCRIPTION
PMT MOUNTING
CATALOG
NUMBER
NOTES
TYPE
Hydrel Lighting Fixtures
(Sold Separately)
DESCRIPTION
Specifications
L:
H:
Pole Mount Tee suitable for mounting two Hydrel Accent or
Flood lighting fixtures. Mounts over a standard 2-3/8” tenon.
Default fixture location is 2.5” from end of arm.
24” or 36”
610 mm or 914 mm
4”
102 mm
EXAMPLE: PMT24 109C BL
ORDERING INFORMATION
PMT24
109C
Model
Fixture Mounting
Finish
PMT241
12C
1/2” NPT
BL
Black
SND
Sand
34C
3/4” NPT
BZ
Bronze
STG
Steel Gray
38TL
3/8” Taper Lock
DDB
Dark Bronze
TVG
Terra Verde Green
78C
7/8” Thru hole
DNA Natural Aluminum
WH
White
109C
1” Thru hole
GN
Green
CF
Custom
SC
Cord Seal Mount (small)
GR
Gray
__Z2
Zinc Undercoat (i.e. BLZ)
TC
Tenon Mount (2 3/8” OD tenon)
LSC
Cord Seal Mount (large)
PMT36
BL
Notes:
1 PMT24 can not be used with 7200 & 8200 fixtures.
2 Add Zinc undercoat for harsh environments.
FIXTURE MOUNTING INFORMATION
FEATURES & SPECIFICATIONS
Fixture Mounting
Size
Fixture that uses this mounting1:
MATERIAL: Aluminum.
12C
1/2” NPT
WIRING: Two (2) splice access end caps provided.
16C
PG16
4511, 4516, 4519, 4524, 4525, 4529,
4600 KM, 4709, 4798, 4799, 4750
4600 KM with IEC listing
34C
3/4” NPT
4521
78C
7/8” thru hole
7000 KM
109C
1.09” thru hole
7100 KM
FINISH: Super durable Polyester TGIC powder coat finish (standard). Optional Zinc undercoat for
harsh environments.
LSC
Large Cord Seal
7200 YM, 8200 YM
FASTENERS: Stainless Steel.
SC or SCM
Cord Seal
WARRANTY: 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
TC
2 3/8” tenon
38TL
3/8” taper lock
4600 YM, 4740, 7000 YM, 7100 YM,
8100 YM
7200 KM - mounts over a standard 2
3/8” or T20 tenon
TPS1, TPS2
FIXTURE MOUNTING: Two mounting locations on the top of the arm accept lighting fixtures
with threaded knuckle mounts. Two 2 3/8” dia. top tenon mounts also available for slip fitter
knuckle mount fixtures.
Consult factory for details
Actual performance may differ as a result of end-user environment and application.
NOTE: Specifications subject to change without notice.
Notes:
1 Not all fixtures on this chart are available with all accessories, consult the fixture
mounting column to see which options are available on this mounting.
NOTE: Hydrel Reserves The Right To Modify Specification Without Notice. Any dimension on this sheet is to
be assumed as a reference dimension: “Used for information purposes only. It does not govern manufacturing
or inspection requirements.” (ANSI Y14.5-1973)
9144 Deering Avenue, Second Floor • Chatsworth, CA 91311 • www.hydrel.com
Phone: 866.533.9901 • Fax: 866.533.5291
©2014 Acuity Brands Lighting, Inc.
Rev. 11/05/14
PMT