BLS 500S - Series cnc-multitool GmbH Panel Cutting Machines MADE IN GERMANY
Transcription
BLS 500S - Series cnc-multitool GmbH Panel Cutting Machines MADE IN GERMANY
BLS 500S - Series Panel Cutting Machines MADE IN GERMANY cnc-multitool GmbH | Neuhäuser Weg 1b | D-98693 Ilmenau | Phone +49 (0) 3677 877 233 | [email protected] http://www.cnc-multitool.com BLS 510S - Series Multiwire horizontal block cutter for cutting EPS and Neopor Blocks. These semi-automatic EPS Slicers can slice polystyrene blocks with up to 5 wires simultatiously. The wires can be installed horizontally and/ or diagonally to cut plates, sloping boards, slope insulation from insulation boards with a Size of up 1300x1300mm. These machines work without a computer. MADE IN GERMANY Specification Application Packaging, special packing Semi-automatic EPS cutting machines Insulation panels No computer needed Roof insulation Runs on single button Slope roofs multiple cutting wires Craft and Industry Horizontal, diagonal cutting CNC CUTTING CNC ACCESSORIES CNC SOFTWARE Technical Data CNC MODEL X-Achse (1) BLS 510S mm/inch BLS 515S mm/inch 600 mm / 23” 1.300 mm / 51” Y-Achse (2) Z-Achse (3) CATALOG Wire 600 mm / 23” 1.300 mm / 51” 5 1.300 mm / 51” 1.300 mm / 51” 5 OUR PRODUCTS CNC Foam cutting machines CNC Milling Machines (1) Horizontal travel forward / back (2) Vertical travel up / down (3) Length of the cutting wire Contour cutting machines Gate cutters Block cutters Coating machines 3D Laser scanners PU Coating Systems cnc-multitool 11 || D-98693 D-98693 Ilmenau Ilmenau || Phone Phone +49 +49 (0) (0) 3677 3677 877 877 233 233 || cnc-multitool GmbH GmbH||Ludwig-Jahn-Str. Neuhäuser Weg 1b [email protected] [email protected] http://www.cnc-multitool.com Content of Delivery Machine fully assembled and tested Machine control, power supply Power supply for 5 wires Cutting wire, tension spring, tools Manuals, installation instructions, tutorials 1-year technical support 2-year warranty Cutting Wire The assembling of the machine takes about 20 minutes. For operation no further equipment is needed. Optional Accessories Cutting wires Springs Delivery About 6 weeks after receiving payment Insured transportation Pickup available cnc-multitool GmbH | Neuhäuser Weg 1b | D-98693 Ilmenau | Phone +49 (0) 3677 877 233 | Software [email protected] http://www.cnc-multitool.com BLS 520S - Serie Multi wire Tile cutters for processing Styrofoam blocks and Neopor blocks up to a size of 5.100x1.300x1.300mm. These semi-automatic EPS Slicers cut styrofoam blocks thermally with up to 10 (20) wires simultatiously. The wires can be installed horizontally and/ or diagonally to cut plates, sloping boards, slope insulation from insulation boards. These machines work without a computer. MADE IN GERMANY Specification Application Packaging, special packing Semi-automatic EPS cutting machines Insulation panels No computer needed Roof insulation Runs on single button Slope roofs multiple cutting wires Craft and Industry Horizontal, diagonal cutting CNC CUTTING CNC ACCESSORIES CNC SOFTWARE Technical Data CNC MODELL X-Achse (1) Y-Achse (2) Z-Achse (3) Drähte BLS 525S mm/inch 2.100 mm / 82” 1.300 mm / 51” 1.300 mm / 51” 10 BLS 535S mm/inch 3.100 mm / 122” 1.300 mm / 51” 1.300 mm / 51” 10 BLS 545S mm/inch 4.100 mm / 161” 1.300 mm / 51” 1.300 mm / 51” 10 BLS 555S mm/inch 5.100 mm / 201” 1.300 mm / 51” 1.300 mm / 51” 10 (1) Horizontales Fahrweg vor und zurück (2) Vertikales Schneidebereich CATALOG OUR PRODUCTS CNC Foam cutting machines CNC Milling Machines Contour cutting machines (3) Schneidedrahtlänge Gate cutters Block cutters Coating machines 3D Laser scanners PU Coating Systems cnc-multitool 11 || D-98693 D-98693 Ilmenau Ilmenau || Phone Phone +49 +49 (0) (0) 3677 3677 877 877 233 233 || cnc-multitool GmbH GmbH||Ludwig-Jahn-Str. Neuhäuser Weg 1b [email protected] [email protected] http://www.cnc-multitool.com Content of Delivery Machine fully assembled and tested Machine control, power supply Power supply for 10 wires Cutting wire, tension spring, tools Manuals, installation instructions 1-year technical support 2-year warranty Cutting Wire The assembling of the machine takes about 20 minutes. For operation no further equipment is needed. Optional Accessories Cutting wires Springs Delivery About 6 weeks after receiving payment Insured transportation Pickup available cnc-multitool GmbH | Neuhäuser Weg 1b | D-98693 Ilmenau | Phone +49 (0) 3677 877 233 | Software [email protected] cnc-multitool GmbH Neuhäuser Weg 1b 98693 Ilmenau T. +49 (0) 3677 877233 F. +49 (0) 3677 67517 [email protected]