Product Description [Chassis Switch] S12700 Agile Switch Ordering Guide

[Chassis Switch] S12700 Agile Switch Ordering Guide
Product Description
The S12700 series switches are fully programmable agile core switches designed for
next-generation campus networks. Using a full programmability architecture, the S12700 series
allows fast, flexible function customization and supports a smooth evolution to software-defined
networking (SDN). The S12700 series uses Huawei's Ethernet network processor (ENP) chip and
provides native AC functions to help build a wired and wireless converged network. It supports
Packet Conservation Algorithm for Internet (iPCA) to perform hop-by-hop monitoring of real
service flows, helping customers manage services in a more refined way. Based on Huawei
Versatile Routing Platform (VRP), the S12700 provides high Layer 2/Layer 3 switching
capabilities and integrates diversified services such as MPLS VPN, hardware IPv6, desktop cloud,
and video conferencing. In addition, the S12700 provides a variety of reliability technologies
including in-service software upgrade, non-stop forwarding, CSS2 switch fabric hardware
clustering that allows1+N backup of MPUs, hardware Eth-OAM/BFD, and ring network protection These
technologies improve customers' network efficiency and maximize the network operation time,
reducing customers' total cost of ownership (TCO).
The S12700 series are available in two models: S12708 and S12712.
Configuration Procedure
Typical procedure for configuring an S12700:
Select chassis, MPU, switching fabric, and power module -> Select service cards -> Select
special service cards -> Select software and license -> Select optical modules -> Select cluster
cables -> Other requirements -> Select auxiliaries.
1. Select the chassis, MPU, and power module
1)
Select the chassis model based on the number of LPUs required in each chassis.
Part
number/Model
Description
02114178/
ET1BS12708S0
S12708
chassis
02114180/
ET1BS12712S0
S12712
chassis
2)
MPU
LPUs
Switching
Fabric
Units
Power
Slots
8
4
6
12
4
6
1+1
backup
CMU
Max Power
Consumption
1+1
backup
<= 4400 W
<= 6600 W
Select the MPU according to the chassis and requirements for backup.
Part Number
Model
Description
Chassis
Remarks
03030RPE
ET1D2MPUA000
MPUA
S12708/12712
None
3)
Select the switching fabric unit according to the switching bandwidth. The different
models SFU cannot be mixed installation.
Part
Number
Model
Description
Chassis
Remarks
03030RPF
ET1D2SFUA000
SFUA
S12708/12712
None
03030RPC
ET1D2SFUC000
SFUC
S12708
None
03030RPG
ET1D2SFUD000
SFUD
S12708/12712
None
4)
Select the power module
Two types of power modules are available for S12700. 3 of the power modules can realize
full supply of the power consumption.
The power modules configure rules below:
a) If S12708/S12712 configures fabric card SFUA and meet the mode: 2<=the number of
(LPU+SFUA) <=16, it suggests that the 2 power modules be configured at least.
b) If S12708/S12712 configures fabric card SFUC/SFUD and meet the mode: 2<=the number of
(LPU+SFUA) <=8, it suggests that the 3 power modules be configured at least.
c) For more details , please see the Huawei power consumption calculator.
Part Number
02131120
02270147
Power Module
Description
S12708/S12712
PAC-2200WF
2200 W AC power module F
(black)
M+N backup (M+N ≤ 6)
PDC-2200WF
2200 W DC power module F
(black)
2. Select service cards
Select service cards considering the required interface type and requirements on MAC
address quantity, MPLS, unicast and multicast route quantity, and service card cluster.
Card
Type
MAC
MPLS
Interface Type
FIB
ARP
X1E
1M
Y

48*GE electrical/optical
256K

4*10GE(SFP+)+24GE
optical+8 combo

8*10GE(SFP+)+8GE
optical+8 combo
256K by default,
which can be
extended after the
license is loaded
SC
32K
N

12*10GE optical (SFP+)
12K
8K
EA
32K
Y

48*GE electrical/optical
16K
16K

36*GE
optical
electrical+12*GE
EC
128K
SC
128K
Y
Y

4*10GE optical (XFP)

48*GE electrical/optical

4*10GE optical (XFP)

24*GE optical

48*10GE optical (SFP+)

16*10GE(SFP+)

2*40GE(QSFP+)

8*40GE(QSFP+)
128K
16K
16K
8K(16*10GE)
16K(2*40GE,
8*40GE)
3. Select special service cards
The S12700 provides multiple types of service cards.
Part Number/Model
Type
Function

03030NWB /
EH1D200CMU00
ET1D2FW00S00
ET1D2FW00S01
ET1D2FW00S02
EH1D2IPS0S00
CMU
NGFW Module A
NGFW Module B
NGFW Module C
IPS card

Remarks
The S12708/S12712 supports the
Monitor and manage 1+1 redundancy mode. One CMU is
the power modules. configured on the S12708/S12712;
Monitor and manage therefore, you can choose to
configure another CMU according to
fans.
user requirements.

Firewall

NAT

SLB

IPSec VPN/SSL VPN

NetStream

Anti-DDos

IPS

Firewall

NAT

SLB

IPSec VPN/SSL VPN

NetStream

Anti-DDos

IPS

Firewall

NAT

SLB

IPSec VPN/SSL VPN

NetStream

Anti-DDos

IPS

IPS
Part Number/Model
Type
8-port 10G cluster
03021UWH /EH1D2VS08000 switching system
service unit (SFP+)
03022HXD/LE2D2FW00W02 Wireless access
control card
(ACU2)
Function

IDS

Cluster switching
system service unit
dedicated for
S12700

Remarks
Used together with the switching
fabric unit.
Provides the WLAN
AC function.
4. Select software and license
License configuration demonstration
Part Number
Description
Configuration
05160692
Software fee-S12700 basic software, V200R005C00
Select a software package
according to customer needs. By
default, the mainstream software
package in the supply chain is
delivered.
05012EVM
Software fee-S12700 basic software, V200R006C00
05012KGE
Software fee-S12700 basic software, V200R007C00
81400500
MPLS Function License
Bought according to project
requirements.
81400501
NQA Function License
Bought according to project
requirements.
81400502
IPv6 Function License
Bought according to project
requirements.
81400653
SVF Function License (applicable only to the S12700 series)
Bought according to project
requirements.
82400519
X-series LPU FIB Resource License-128K
128K by default, Bought according
82400520
X-series LPU FIB Resource License-512K
to project requirements.
82400503
WLAN Access Controller AP Resource License-512AP (with
the X-series LPU used)
82400504
WLAN Access Controller AP Resource License-128AP (with
the X-series LPU used)
82400505
WLAN Access Controller AP Resource License-64AP (with the to project requirements.
X-series LPU used)
82400506
WLAN Access Controller AP Resource License-16AP (with the
X-series LPU used)
16 AP by default，Bought according
5. Select electrical modules and optical modules
The following electrical and optical modules are available for S12700: 1 electrical module, 8 FE,
GE optical modules, 7 single-fiber bidirectional GE optical modules, 20 10GE optical modules, 2
single-fiber bidirectional 10GE optical modules, and 4 40GE optical modules.
Part Number
Model
Configuration Principle
Remarks
02314171
SFP-1000BaseT
This item is optional and the quantity is
determined according to project requirements.
100m GE electrical
module
02315204
eSFP-GE-SX-MM850
This item is optional and the quantity is
determined according to project requirements.
500m multi-mode
GE-SFP
10km single-mode
GE-SFP
02315200
SFP-GE-LX-SM1310
02317344
S-SFP-FE-LH40-SM1310
02317345
S-SFP-FE-LH80-SM1550
02317346
S-SFP-GE-LH40-SM1310
02317347
S-SFP-GE-LH40-SM1550
02317348
S-SFP-GE-LH80-SM1550
02315206
eSFP-GE-ZX100-SM1550
100km single-mode
GE-SFP
02315176
XFP-SX-MM850
0.3km multi-mode
10GE-XFP
02315208
XFP-STM64-LX-SM1310
02315209
XFP-STM64-LH40-SM1550
02315143
XFP-STM64-SM1550-80km
80km single-mode
10GE-XFP
02318169
OMXD30000
0.3km multi-mode
10GE-SFP+
02318170
OSX010000
10km single-mode
10GE-SFP+
02310CNF
OSX040N01
This item is selected when the transmission
distance is long and the quantity is determined
according to project requirements.
40km single-mode
FE/STM1-SFP
80km single-mode
FE/STM1-SFP
40km single-mode
GE-SFP
This item is selected when the transmission
distance is long and the quantity is determined
according to project requirements.
This item is selected when the XFP cards are used
and the quantity is determined according to
project requirements.
This item is selected when the SFP+ cards are
used and the quantity is determined according to
project requirements.
40km single-mode
GE-SFP
80km single-mode
GE-SFP
10km single-mode
10GE-XFP
40km single-mode
10GE-XFP
40km single-mode
10GE-SFP+
SFP-10G-ZR
80km single-mode
10GE-SFP+
02310CRM
OSXD22N00
0.22km multi-mode
10GE-SFP+
02310SSE
SFP-10G-ZCW1511
02310SNN
This item is selected when the SFP+ cards are
70km
CWDM
Part Number
Model
Configuration Principle
Remarks
used and the quantity is determined according to
project requirements.
single-mode
10GE-SFP+
SFP-10G-ZCW1471
70km
CWDM
single-mode
10GE-SFP+
02310SSF
SFP-10G-ZCW1491
70km
CWDM
single-mode
10GE-SFP+
02310SSD
SFP-10G-ZCW1531
70km
CWDM
single-mode
10GE-SFP+
02310SSC
SFP-10G-ZCW1551
70km
CWDM
single-mode
10GE-SFP+
02310SSB
SFP-10G-ZCW1571
70km
CWDM
single-mode
10GE-SFP+
02310SSA
SFP-10G-ZCW1591
70km
CWDM
single-mode
10GE-SFP+
02310SRY
SFP-10G-ZCW1611
70km
CWDM
single-mode
10GE-SFP+
02310SNN
SFP-10G-ZR
80km single-mode
10GE-SFP+
02310MNW
SFP-10G-USR
100m multi-mode
10GE-SFP+
02310JFE
LE2MXSC80FF0
02310SSG
02310QBJ
SFP-10G-BXU1
This item is selected when the 8-port SFP+ 10GE
cards are used.
80km single-mode
10GE-SFP+
10km multi-mode
10GE-SFP+
SFP-10G-BXD1
This item is selected when BIDI is used and the
quantity is determined according to project
requirements.
QSFP-40G-LR4
This item is optional. QSFP connects to QSFP.
10K
multi-mode
40GE QSFP+
02310MHR
QSFP-40G-iSR4
This item is optional. QSFP connects to four
SFP+ optical modules.
0.15km multi-mode
40GE QSFP+
02310RMB
QSFP-40G-eiSR4
This item is optional. QSFP connects to four
SFP+ optical modules.
0.3km multi-mode
40GE QSFP+
02315203
SFP-FE-LX-SM1310-BIDI
This item is selected when BIDI is used and the
quantity is determined according to project
requirements.
15km single-fiber
FE
bidirectional
(BIDI)
optical
module (02315202
and 02315203 are
02310QDT
02310MHS
02315202
SFP-FE-LX-SM1550-BIDI
10km single-mode
10GE-SFP+
Part Number
Model
Configuration Principle
Remarks
used together)
02315285
SFP-GE-LX-SM1310-BIDI
02315286
SFP-GE-LX-SM1490-BIDI
02310KVU
LE2MGSC40ED0
02310KVV
LE2MGSC40DE0
10km single-mode
GE
bidirectional
(BIDI)
optical
module (02315286
and 02315285 are
used together)
40km single-mode
GE
bidirectional
(BIDI)
optical
module (02310KVV
and 02310KVU are
used together)
6. Select cluster cables
The S12700 supports CSS2 switch fabric hardware cluster.
EH1D2VS08000 is the CSS2 switch fabric hardware cluster subcard. It works with the CSS2
switch fabric to provide the cluster function. After the cluster subcard is selected (excluding the
cluster cables), the CSS2 switch fabric hardware cluster function can be implemented using
certain cables or fibers, for example, SFP+ cables, SFP+ optical modules, or AOC cables.
Part Number
Description
Remarks
02310MUN
SFP,10G,High Speed Direct-attach
Cables,1m,SFP+20M,CC8P0.254B(S),SFP+20M,Used indoor
1m: SFP+<->SFP+, high-speed
cable
02310MUP
SFP,10G,High Speed Direct-attach
Cables,3m,SFP+20M,CC8P0.254B(S),SFP+20M,Used indoor
3m: SFP+<->SFP+, high-speed
cable (not supported by 12-port
10GE interface cards)
02310MUQ
SFP,10G,Active High Speed
Cables,10m,SFP+20M,CC8P0.32B(S),SFP+20M,Used indoor
10m: SFP+<->SFP+, high-speed
cable
02310QWG
AOC Optical Transceiver,SFP+,850nm,1G~10G,0.003km
3m, supporting connection between
10G SFP+ port and 10G SFP+ port
02310QWH
AOC Optical Transceiver,SFP+,850nm,1G~10G,0.01km
10m, supporting connection
between 10G SFP+ port and 10G
SFP+ port
7. Other requirements
Cabinet: Huawei provides specialized AC and DC cabinets for the S12708/S12712. Each cabinet
can accommodate one S12712 or two S12708s. You can configure the cabinet according to
requirements.
8. Select auxiliary materials
1)
Fibers: To configure fibers for a non-BIDI optical module, each optical interface must be
configured with a Tx optical fiber and an Rx optical fiber of the same type. To configure fibers for
a BIDI optical module, configure only one optical fiber. If single-mode optical modules are used,
configure single-mode fibers. If multimode optical modules are used, configure multimode fibers.
You can select fibers of different lengths. Huawei provides fibers of 10 m, 20 m, and 30 m.
2) Network cables: Each network cable is configured with two RJ45 connectors (part number
14080082). The length of network cables is determined according to user requirements. The price
increases for every 1 m increase in length. The network cable (part number 25050014) is sold with
the connectors (part number 14080082).
3)
Cables:
External cables used for assemble chassis (desk installation)
a)
No cabinet is used. The assembly chassis obtains power from customer's PDF.
Table 1-1 Power cable configuration description
Desk Installation
Power module
Maximum air
breaker current
Power cable
The cables are quoted. When the maximum input current of
power module is 60 A, the cables are selected based on the
distance between the chassis and PDF:
2200 W DC
(part number
02270117)
1. Within 14 meters: 10 mm blue and black power cables
60 A
2. Within 23 meters: 16 mm blue and black power cables
3. Within 36 meters: 25 mm blue and black power cables
4. Longer than 36 meters: notify the customer that a power
distribution box is required
2200 W AC
(part number
02131120)
15.5 A
Delivered according to contract: (04000207) External
Suite,Power Cords All Over The World,Class I Equipment With
Connector C19,External Cable Set. One cable is delivered for
each power module. By default, the 3 m cable is delivered.
Note:
1.
The price of cables is included in the quotation of DC power module. By default, Huawei provides blue
(-48 V) and black (GND) cables. If the customer needs other cables, the requirement should be added to
the contract, and the cables may be purchased locally or from Huawei headquarters.
2.
If the customer has not chosen cabinet and power distribution box, Huawei delivers a 3 m AC power
cable for the AC power module. The power cable model is selected by Huawei according to standards in
the corresponding country.
External cables used for assemble cabinet (with a power distribution box)
b)
The cabinet and power distribution box obtain power from the customer's PDF, and
provide power to the power modules.
Table 1-2 External cables used for assemble cabinet
Power Distribution Box Scenario
Cabinet model
N68-AC cabinet
(part number:
02113563)
N68-DC cabinet
(part number:
02113562)
Cabinet model
Input/output: 2
inputs, 4 outputs
Air breaker:
16A*4
Input/output: 8
inputs, 8 outputs
(4 inputs, 8
outputs
implemented by
using copper bar)
Air breaker:
63A*8
Cabinet model
4PCS (2200 W
AC)
Cabinet model
By default, Huawei provides AC power cables with black
PVC cover (three core colors: blue, brown, and
yellow/green)
1. Within 13 meters: 6 mm AC power cables
2. Within 35 meters: 16 mm AC power cables
The maximum input power of the power distribution box is
63 A in the case of 8 inputs and 8 outputs. The cables are
selected based on the distance between the chassis and
PDF:
1. Within 18 meters: 16 mm blue/black power cables
8PCS (2200 W
DC)
2. Within 29 meters: 25 mm blue/black power cables
3. Within 41 meters: 35 mm blue/black power cables
Note: If the air breaker current must reach 126 A in the case
of 4 inputs and 8 outputs, only 35 mm blue/black power
cables can be used and the powering distance is within 20
meters.