docDUPLOMATIC Turrets
download 
Report Transcription
DUPLOMATIC Turrets
Driven Tool Holders For DUPLOMATIC Turrets 10139 BERGIN RD. HOWELL, MI 48843 PHONE : 877-91-TOOLS ( 810-632-4446 ) FAX: 877-92-TOOLS ( 810-632-4467 ) EMAIL: [email protected] WEBSITE: www.mdtooling.com February 2013 Live Tooling Live Tool Technology M. T. Marchetti, a major live tool manufacture in northern Italy, is a leader in live tool technology. The formula is simple. Use only the best angular contact high-speed bearings available. Add to this exacting tolerances for all ground shafts, gears and bearing pocket features. Next, develop a sealed system that will not allow any contamination from chips or coolant. Top this all off with a superior design and you end up with a live tool that is more rigid, faster and will last longer. We back this up with a 2-Year factory warranty. Our Live Tool Warranty Our tooling will give years of service in the most demanding applications. The superior design and rugged construction has proven this over the last 12 years. The reliability of our tools allows us to provide a 2-year factory warranty. MD TOOLING will repair any defective tool holders for a period of 2 years from the date of purchase. Product Range We have the largest range of live tooling available for most major machine tool manufactures. Our available products include an extensive line of standard live tooling as well as specialty toolholders such as 0-90 and 0-180 adjustable angle tool holders, gear hobbers, and even worm gear generators. Our product range includes geared up holders to 60,000 RPM and are engineered for 1,000 PSI coolant through. We are an industry leader in providing complete tooling solutions with hundreds of static tool options as well. Technical Support Here at MD Tooling we have a full technical support department with over 25 years of CNC experience. Our highly qualified staff can help with part processing, tooling up a job from a blue print and even assist with part programming. Applications Engineers are always available by phone to answer any questions you may have about our tooling or any other CNC related issue. Stock and Replenishment MD Tooling maintains an extensive inventory of tooling in our warehouse in Michigan. Our current “fill” rate on orders is 93% from our stock in Michigan for same day shipping. Should you require a non-stock item, our manufacturer, M.T. Marchetti also maintains a large inventory in Italy. Tooling can be obtained in as little as 3-5 business days. Shipping MD Tooling realizes that when you need tooling, often you can’t wait until the next day. We process orders and ship from available stock right up until 5PM EST to make certain we get your tooling solutions to you as quickly as possible. We regularly ship throughout the day via DHL, UPS, FedEx or any other carrier that a customer requests. 10139 Bergin Road Howell, MI 48843 Phone: 810 632-4446 Fax: 810 632-4467 Email: [email protected] Web: www.mdtooling.com • 2-Year Warranty on all live tools. • Quality tooling at highly competitive pricing. • Extensive inventory. We currently ship over 93% of all orders same day. • Fast, Friendly, Reliable Service! • More specialty tool holders than any other manufacturer. • Custom tool holders available. • All available tooling may not be shown in this catalog. If you can’t find the holder you’re looking for, please contact this office for assistance. Table of Contents VDI30 DRIVEN RADIAL DRIVEN TOOL VDI30 - RH RADIAL DRIVEN TOOL VDI30 - LH RADIAL REAR-SET DRIVEN VDI30 H=75 - RH RADIAL REAR-SET DRIVEN VDI30 H=75 - LH RADIAL REAR-SET DRIVEN VDI30 H=85 - RH RADIAL REAR-SET DRIVEN VDI30 H=85 - LH AXIAL DRIVEN TOOL VDI30 VDI40 DRIVEN RADIAL DRIVEN TOOL H=100 RADIAL MTSK DRIVEN TOOL VDI40 RADIAL REAR-SET DRIVEN TOOL - RH RADIAL REAR-SET DRIVEN TOOL - LH RADIAL GEARED-UP 1:2 DRIVEN TOOL VDI40 AXIAL DRIVEN TOOL AXIAL RE-DIRECTED DRIVEN TOOL GEARED-DOWN AXIAL RE-DIRECTED DRIVEN TOOL 0-90 ADJUSTABLE ANGLE DRIVEN TOOL VDI50 DRIVEN RADIAL DRIVEN TOOL - RH RADIAL DRIVEN TOOL - LH RADIAL 4 HEAD DRIVEN TOOL AXIAL DRIVEN TOOL AXIAL RE-DIRECTED DRIVEN TOOL 0-90 ADJUSTABLE ANGLE DRIVEN TOOL GEAR HOBBER - RH GEAR HOBBER - LH Categorized Listing 1 1 1 1 2 2 3 3 4 5 5 5 5 6 6 7 8 8 9 9 10 10 10 10 10 11 11 12 12 13 VDI30 DRIVEN RADIAL DRIVEN TOOL VDI30 - RH PartNumber Description DUP0080125 ER Standard VDI30, Right DUP0080225 Spindle I RPM ER25 1:1 6000 D 16X17 1:1 6000 X 16 1:1 6000 X DUP0080416 DUP0080316 WELDON 16 VDI30, Right WELDON16 PartNumber Description Spindle I RPM DUP0081125 ER Standard VDI30, Left ER25 1:1 6000 16X17 1:1 6000 X WELDON16 1:1 6000 X 22X19 VDI30, Right RADIAL DRIVEN TOOL VDI30 - LH DUP0081225 DUP0081416 ER Standard VDI30, Left, Coolant Thru* 16X17 VDI30, Left DUP0081316 WELDON 16 VDI30, Left DUP0081422 22X19 VDI30, Left www.mdtooling.com : February 2013 1:1 Ext. Coolant X ER Standard VDI30, Right, Coolant Thru* 16X17 VDI30, Right DUP0080422 ER25 Coolant Thru 22X19 ER25 22X19 1:1 1:1 1:1 Page1 6000 X 6000 A2 Coolant Ext. Thru Coolant X 48 17 22 D 19 L 45 47 A1 38 54.5 A2 38 38 B 38 X X B 38 X X A1 X 6000 6000 L 48 16 22 17 19 45 47 38 54.5 38 38 Phone: 810-632-4446 : Fax: 810-632-4467 VDI30 DRIVEN RADIAL REAR-SET DRIVEN VDI30 H=75 - RH PartNumber Description DUP0090125 Radial Rear-Set ER25, VDI30 H=75, Right DUP0090225 DUP0090325 DUP0090425 DUP0090516 Spindle I RPM ER25 1:1 6000 1:1 6000 1:1 6000 1:1 6000 Radial Rear-Set ER25, VDI30 H=75, Right, ER25 Coolant Thru* Radial Rear-Set ERA25, VDI30 H=75, ERA25 Right Radial Rear-Set ERA25, VDI30 H=75, ERA25 Right, Coolant Thru* Radial Rear-Set Weldon16, VDI30 H=75, WELDON16 Right 1:1 6000 Coolant Ext. Thru Coolant X X X X A1 A2 B 42.16 27.5 73.5 42.16 83.5 X 28.5 73.5 X 28.5 83.5 X 73.5 RADIAL REAR-SET DRIVEN VDI30 H=75 - LH PartNumber Description DUP0091125 Radial Rear-Set ER25, VDI30 H=75, Left DUP0091225 DUP0091325 DUP0091425 DUP0091516 Spindle I RPM ER25 1:1 ERA25 WELDON16 Radial Rear-Set ER25, VDI30 H=75, Left, Coolant Thru* Radial Rear-Set ERA25, VDI30 H=75, Left ER25 Radial Rear-Set ERA25, VDI30 H=75, Left, Coolant Thru* Radial Rear-Set Weldon16, VDI30 H=75, Left, Coolant Thru* www.mdtooling.com : February 2013 ER25 Page2 6000 Ext. Coolant X 42.16 73.5 1:1 6000 X 28.5 73.5 1:1 6000 X 1:1 1:1 6000 6000 X X A1 A2 42.16 B 73.5 28.5 83.5 27.5 83.5 Phone: 810-632-4446 : Fax: 810-632-4467 VDI30 DRIVEN RADIAL REAR-SET DRIVEN VDI30 H=85 - RH PartNumber Description DUP0100125 Radial Rear-Set ER25, Right DUP0100325 Radial Rear-Set ERA25, Right DUP0100225 DUP0100425 DUP0100516 Radial Rear-Set ER25, Right, Coolant Thru* Radial Rear-Set ERA25, Right, Coolant Thru* Radial Rear-Set Weldon16, Right Description DUP0101125 Radial Rear-Set ER25, Left DUP0101325 Radial Rear-Set ERA25, Left DUP0101225 DUP0101425 DUP0101516 Radial Rear-Set ER25, Left, Coolant Thru* Radial Rear-Set ERA25, Left, Coolant Thru* Radial Rear-Set Weldon16, Left www.mdtooling.com : February 2013 I RPM ER25 1:1 6000 ERA25 1:1 6000 ER25 1:1 ERA25 RADIAL REAR-SET DRIVEN VDI30 H=85 - LH PartNumber Spindle 1:1 WELDON16 1:1 6000 X 6000 X I RPM ER25 1:1 6000 ERA25 1:1 6000 ERA25 WELDON16 Page3 1:1 1:1 1:1 Ext. Coolant X 42.16 73.5 X 28.5 73.5 X X 6000 Spindle ER25 Coolant Thru Coolant Thru X 6000 X A2 42.16 83.5 27.5 42.16 73.5 X 28.5 73.5 X X A2 73.5 Ext. Coolant X X A1 B 83.5 28.5 X 6000 6000 A1 42.16 B 83.5 28.5 83.5 27.5 73.5 Phone: 810-632-4446 : Fax: 810-632-4467 VDI30 DRIVEN AXIAL DRIVEN TOOL VDI30 PartNumber DUP0070125 Description ER25 Standard VDI30 www.mdtooling.com : February 2013 Spindle ER25 Page4 I 1:1 RPM 6000 Phone: 810-632-4446 : Fax: 810-632-4467 VDI40 DRIVEN RADIAL DRIVEN TOOL H=100 PartNumber Description Orientation Spindle I RPM DUP0040132 ER32 Standard, VDI40, H100 Right Hand ER32 1:1 4000 DUP0042219 VDI40, H100, Milling Head22x19 Right Hand 22x19 1:1 4000 DUP0040232 DUP0042721 ER32, VDI40, H100 Coolant Thru* VDI40, H100, Milling Head 27x21 Right Hand Right Hand ER32 27x21 1:1 1:1 4000 Coolant Thru X Ext A Coolant X 101.1 4000 X X 101.1 X A1 B D L 22 19 58.5 78.5 78.5 82 58.5 58.5 27 21 RADIAL MTSK DRIVEN TOOL VDI40 PartNumber DUP0130140 Description Radial MTSK Driven Tool VDI40 www.mdtooling.com : February 2013 Spindle MTSK Page5 I 1:1 Ext. Coolant X Phone: 810-632-4446 : Fax: 810-632-4467 VDI40 DRIVEN RADIAL REAR-SET DRIVEN TOOL - RH PartNumber 141DUP_R32_40A00 141DUP_R32_40A01 Description Rear-Set ER32 Standard, Right Rear-Set ER32 Standard, Right RADIAL REAR-SET DRIVEN TOOL - LH PartNumber 141DUP_R32_40A20 141DUP_R32_40A21 Description Rear-Set ER32 Standard, Left Rear-Set ER32 Standard, Left www.mdtooling.com : February 2013 Spindle ER32 I 1:1 RPM 4000 Ext Coolant X Spindle ER32 I 1:1 RPM 4000 ER32 ER32 Page6 1:1 1:1 4000 4000 X Turret Duplomatic Duplomatic Comev A 8 D 18 Ext Coolant X Turret Duplomatic A 8 D 18 X Duplomatic Comev 6 6 12 12 Phone: 810-632-4446 : Fax: 810-632-4467 VDI40 DRIVEN RADIAL GEARED-UP 1:2 DRIVEN TOOL VDI40 PartNumber DUP0110332 DUP0110432 Description Radial Geared-Up 1:2 Driven, ERA32 Radial Geared-Up 1:2 Driven, ERA32, Coolant Thru* www.mdtooling.com : February 2013 Page7 Spindle ERA32 ERA32 I 1:2 1:2 Coolant Thru X Ext. Coolant X X B 66 76 Phone: 810-632-4446 : Fax: 810-632-4467 VDI40 DRIVEN AXIAL DRIVEN TOOL PartNumber Description 142DUP_A32_40A00 ER32 Standard Spindle ER32 I 1:1 RPM 4000 Coolant Thru Ext Coolant X Turret Duplomatic A 8 D 18 142DUP_A32_40A10 ER32 Coolant Thru * ER32 1:1 4000 X X Duplomatic 8 18 142DUP_A32_40A01 ER32 Standard ER32 1:1 4000 X Duplomatic Comev 6 12 AXIAL RE-DIRECTED DRIVEN TOOL PartNumber Description Orientation Spindle I RPM 145DUP_A32_40A00 Re-directed ER32 Standard Right Hand ER32 1:1 4000 145DUP_A32_40A10 Re-directed ER32 Coolant Thru * www.mdtooling.com : February 2013 Right Hand Page8 ER32 1:1 4000 Coolant Thru X Ext Coolant X A 144.46 164.96 Phone: 810-632-4446 : Fax: 810-632-4467 VDI40 DRIVEN GEARED-DOWN AXIAL RE-DIRECTED DRIVEN TOOL PartNumber Description Orientation Spindle I RPM 145DUP_A32_40A20 Axial Geared Down ER32 Standard Right Hand ER32 2:1 2000 145DUP_A32_40A30 Axial Geared Down ER32 Coolant Thru * Right Hand ER32 2:1 2000 Coolant Thru X Ext Coolant X A 144.46 164.96 0-90 ADJUSTABLE ANGLE DRIVEN TOOL PartNumber Description Orientation Spindle I RPM 0210020_DUP Adjustable Angle (0-90) ER20 Standard Right Hand ER20 1:1 4000 0211617_DUP Adjustable Angle (0-90) Milling Head D=16mm, L=17mm Adjustable Angle (0-90) Milling Head D=22mm, L=19mm Adjustable Angle (0-90) Milling Head D=3/4", L=3/4" Right Hand 16x17 1:1 4000 Right Hand 22x19 1:1 4000 Right Hand 3/4x3/4 1:1 4000 0210025_DUP 0212219_DUP 0211905_DUP Adjustable Angle (0-90) ER25 Standard www.mdtooling.com : February 2013 Right Hand Page9 ER25 1:1 4000 Ext A Coolant X 84.16 A1 D L 65 16 17 X 66 22 19 X 65 3/4" 3/4" X X 85.66 Phone: 810-632-4446 : Fax: 810-632-4467 VDI50 DRIVEN RADIAL DRIVEN TOOL - RH PartNumber 151DUP_R40_50A00 Description ER40 Standard, Right Orientation Right Hand Spindle ER40 I 1:1 RPM 4000 Ext Coolant X PartNumber 151DUP_R40_50A20 Description ER40 Standard, Left Orientation Left Hand Spindle ER40 I 1:1 RPM 4000 Ext Coolant X RADIAL DRIVEN TOOL - LH RADIAL 4 HEAD DRIVEN TOOL PartNumber Description Orientation 0240025X4_90 ER25 Standard Right Hand 0240025X4_105 ER25 Standard www.mdtooling.com : February 2013 Right Hand # of Tools 4 4 Page10 Spindle I RPM ER25 2:1 2000 ER25 2:1 2000 Ext Coolant X X A 90 105 B C 63.64 44.88 74.246 39.577 Phone: 810-632-4446 : Fax: 810-632-4467 VDI50 DRIVEN AXIAL DRIVEN TOOL PartNumber DUP0020140 DUP0020240 Description ERA40 Standard Spindle ERA40 ERA40 Coolant Thru * ERA40 I 1:1 RPM 4000 1:1 Coolant Thru 4000 X Ext Coolant X X AXIAL RE-DIRECTED DRIVEN TOOL PartNumber 155DUP_A40_50A00 Description Re-directed ER40 Standard www.mdtooling.com : February 2013 Orientation Right Hand Page11 Spindle ER40 I 1:1 RPM 4000 Ext Coolant X Phone: 810-632-4446 : Fax: 810-632-4467 VDI50 DRIVEN 0-90 ADJUSTABLE ANGLE DRIVEN TOOL PartNumber DUP0010120 Description Orientation Adjustable Angle (0-90) ER20 Standard Right Hand DUP0011617 Adjustable Angle (0-90) Milling Head D=16mm, L=17mm Adjustable Angle (0-90) Milling Head D=22mm, L=19mm Adjustable Angle (0-90) Milling Head D=3/4", L=3/4" DUP0010125 DUP0012219 DUP0011905 Adjustable Angle (0-90) ER25 Standard Spindle ER20 I 1:1 RPM 4000 Right Hand 16x17 1:1 4000 Right Hand 22x19 1:1 4000 Right Hand 3/4x3/4 1:1 4000 Right Hand ER25 1:1 4000 Ext Coolant A X 84.16 A1 D L 65 16 17 X 66 22 19 X 65 3/4" 3/4" X X 85.66 GEAR HOBBER - RH PartNumber Description 156DUP_PCR_50A00 Gear Hobber, Right 156DUP_PCR_50A01 Gear Hobber - Geared Down, Right www.mdtooling.com : February 2013 Orientation Right Hand Right Hand Page12 I 1:1 2:1 RPM 4000 2000 Ext Coolant X X D Inch 3/4 - 1 - 1 1/4 3/4 - 1 - 1 1/4 D mm 16-22-27-32 16-22-27-32 Phone: 810-632-4446 : Fax: 810-632-4467 VDI50 DRIVEN GEAR HOBBER - LH PartNumber Description 156DUP_PCR_50A10 Gear Hobber, Left 156DUP_PCR_50A11 Gear Hobber - Geared Down, Left www.mdtooling.com : February 2013 Orientation Left Hand Left Hand Page13 I 1:1 2:1 RPM 4000 2000 Ext Coolant X X D Inch 3/4 - 1 - 1 1/4 3/4 - 1 - 1 1/4 D mm 16-22-27-32 16-22-27-32 Phone: 810-632-4446 : Fax: 810-632-4467 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 33/64 INCH SIZES ER16-001 ER16-002 ER16-003 ER16-004 ER16-005 ER16-006 ER16-007 ER16-008 ER16-009 ER16-010 ER16-011 ER16-012 ER16-013 ER16-014 ER16-015 ER16-016 ER16-017 ER16-018 ER16-019 ER16-020 ER16-021 ER16-022 ER16-023 ER16 Standard ERX16-001 ERX16-002 ERX16-003 ERX16-004 ERX16-005 ERX16-006 ERX16-007 ERX16-008 ERX16-009 ERX16-010 ERX16-011 ERX16-012 ERX16-013 ERX16-014 ERX16-015 ERX16-016 ERX16-017 ERX16-018 ER16 Coolant ER20-001 ER20-002 ER20-003 ER20-004 ER20-005 ER20-006 ER20-007 ER20-008 ER20-009 ER20-010 ER20-011 ER20-012 ER20-013 ER20-014 ER20-015 ER20-016 ER20-017 ER20-018 ER20-019 ER20-020 ER20-021 ER20-022 ER20-023 ER20-024 ER20-025 ER20-026 ER20-027 ER20-028 ER20-029 ER20-030 ER20 Standard ER20X-013 ER20X-012 ER20X-011 ER20X-010 ER20-009 ER20-008 ER20X-007 ER20X-006 ER20X-005 ER20X-004 ER20X-003 ER20X-002 ER20X-001 ER20 Coolant ER25-001 ER25-002 ER25-003 ER25-004 ER25-005 ER25-006 ER25-007 ER25-008 ER25-009 ER25-010 ER25-011 ER25-012 ER25-013 ER25-014 ER25-015 ER25-016 ER25-017 ER25-018 ER25-019 ER25-020 ER25-021 ER25-022 ER25-023 ER25-024 ER25-025 ER25-026 ER25-027 ER25-028 ER25-029 ER25-030 ER25-031 ER25 Standard ER25X-013 ER25X-012 ER25X-011 ER25X-010 ER25X-009 ER25X-008 ER25X-007 ER25X-006 ER25X-005 ER25X-004 ER25X-003 ER25X-002 ER25X-001 ER25 Coolant ER32-001 ER32-002 ER32-003 ER32-004 ER32-005 ER32-006 ER32-007 ER32-008 ER32-009 ER32-010 ER32-011 ER32-012 ER32-013 ER32-014 ER32-015 ER32-016 ER32-017 ER32-018 ER32-019 ER32-020 ER32-021 ER32-022 ER32-023 ER32-024 ER32-025 ER32-026 ER32-027 ER32-028 ER32-029 ER32-030 ER32-031 ER32 Standard ER COLLETS : SETS AND INDIVIDUAL .0002" ACCURACY ER32X-013 ER32X-012 ER32X-011 ER32X-010 ER32X-009 ER32X-008 ER32X-007 ER32X-006 ER32X-005 ER32X-004 ER32X-003 ER32X-002 ER32X-001 ER32 Coolant ER40-001 ER40-002 ER40-003 ER40-004 ER40-005 ER40-006 ER40-007 ER40-008 ER40-009 ER40-010 ER40-011 ER40-012 ER40-013 ER40-014 ER40-015 ER40-016 ER40-017 ER40-018 ER40-019 ER40-020 ER40-021 ER40-022 ER40-023 ER40-024 ER40-025 ER40-026 ER40-027 ER40-028 ER40-029 ER40-030 ER40-031 ER40 Standard ERX40-012 ERX40-011 ERX40-010 ERX40-009 ERX40-008 ERX40-007 ERX40-006 ERX40-005 ERX40-004 ERX40-003 ERX40-002 ERX40-001 ER40 Coolant ER16 Standard ER16-SET INCH SIZES 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 45/64 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 15/16 61/64 31/32 63/64 1" 1-1/64 SET ERX16-SET ER16 Coolant ER20-SET ER20 Standard ERX20-SET ER20 Coolant ER25-SET ER25-032 ER25-033 ER25-034 ER25-035 ER25-036 ER25-037 ER25-038 ER25 Standard ERX25-SET ER25X-017 ER25X-016 ER25X-015 ER25X-014 ER25 Coolant ER32-SET ER32-032 ER32-033 ER32-034 ER32-035 ER32-036 ER32-037 ER32-038 ER32-039 ER32-040 ER32-041 ER32-042 ER32-043 ER32-044 ER32-045 ER32-046 ER32-047 ER32-048 ER32-049 ER32-050 ER32 Standard ERX32-SET ER32X-022 ER32X-021 ER32X-020 ER32X-019 ER32X-018 ER32X-017 ER32X-016 ER32X-015 ER32X-014 ER32 Coolant ER40-032 ER40-033 ER40-034 ER40-035 ER40-036 ER40-037 ER40-038 ER40-039 ER40-040 ER40-041 ER40-042 ER40-043 ER40-044 ER40-045 ER40-046 ER40-047 ER40-048 ER40-049 ER40-050 ER40-051 ER40-052 ER40-053 ER40-054 ER40-055 ER40-056 ER40-057 ER40-058 ER40-059 ER40-060 ER40-061 ER40-062 ER40-063 ER40-SET ER40 Standard ERX40-SET ERX40-028 ERX40-027 ERX40-026 ERX40-025 ERX40-024 ERX40-023 ERX40-022 ERX40-021 ERX40-020 ERX40-019 ERX40-018 ERX40-017 ERX40-016 ERX40-015 ERX40-014 ERX40-013 ER40 Coolant ER COLLETS ER COLLET NUMBER DESCRIPTION ER16-001 thru ER16-023 ER16-SET ERX16-001 thru ERX16-018 ERX16-SET ER20-001 thru ER20-030 ER20-SET ERX20-001 thru ERX20-013 ERX20-SET ER25-001 thru ER25-038 ER25-SET ERX25-001 thru ERX25-017 ERX25-SET ER32-001 thru ER32-050 ER32-SET ERX32-001 thru ERX32-022 ERX32-SET ER40-001 thru ER40-063 ER40-SET ERX40-001 thru ERX40-028 ERX40-SET ER16 Collet ER16 Collet Set (11 Collets) ER16 Sealed Collet ER16 Sealed Collet Set (9 Collets) ER20 Collet ER20 Collet Set (15 Collets) ER20 Sealed Collet ER20 Sealed Collet Set (13 Collets) ER25 Collet ER25 Collet Set (19 Collets) ER25 Sealed Collet ER25 Sealed Collet Set (17 Collets) ER32 Collet ER32 Collet Set (21 Collets) ER32 Sealed Collet ER32 Sealed Collet Set (21 Collets) ER40 Collet ER40 Collet Set (29 Collets) ER40 Sealed Collet ER40 Sealed Collet Set (27 Collets) MD LIST PRICE $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ 15.00 150.00 25.00 220.00 15.00 220.00 25.00 315.00 15.00 275.00 26.00 430.00 15.00 315.00 28.00 588.00 20.00 575.00 30.00 800.00 LIVE TOOL WRENCHES ER COLLET NUMBER DESCRIPTION From Catalog Above ER Collet Wrench (Identify Holder) Spindle Locking Wrench (Identify Holder) From Catalog Above MD LIST PRICE $ 22.00 $ 22.00 Table of Contents Part Number Index 0 0210020_DUP 0210025_DUP 0211617_DUP 0211905_DUP 0212219_DUP 0240025X4_105 0240025X4_90 Adjustable Angle (0-90) ER20 Standard Adjustable Angle (0-90) ER25 Standard Adjustable Angle (0-90) Milling Head D=16mm, L=17mm Adjustable Angle (0-90) Milling Head D=3/4", L=3/4" Adjustable Angle (0-90) Milling Head D=22mm, L=19mm ER25 Standard ER25 Standard 9 9 9 9 9 10 10 141DUP_R32_40A00 141DUP_R32_40A01 141DUP_R32_40A20 141DUP_R32_40A21 142DUP_A32_40A00 142DUP_A32_40A01 142DUP_A32_40A10 145DUP_A32_40A00 145DUP_A32_40A10 145DUP_A32_40A20 145DUP_A32_40A30 151DUP_R40_50A00 151DUP_R40_50A20 155DUP_A40_50A00 156DUP_PCR_50A00 156DUP_PCR_50A01 156DUP_PCR_50A10 156DUP_PCR_50A11 Rear-Set ER32 Standard, Right Rear-Set ER32 Standard, Right Rear-Set ER32 Standard, Left Rear-Set ER32 Standard, Left ER32 Standard ER32 Standard ER32 Coolant Thru * Re-directed ER32 Standard Re-directed ER32 Coolant Thru * Axial Geared Down ER32 Standard Axial Geared Down ER32 Coolant Thru * ER40 Standard, Right ER40 Standard, Left Re-directed ER40 Standard Gear Hobber, Right Gear Hobber - Geared Down, Right Gear Hobber, Left Gear Hobber - Geared Down, Left 6 6 6 6 8 8 8 8 8 9 9 10 10 11 12 12 13 13 DUP0010120 DUP0010125 DUP0011617 DUP0011905 DUP0012219 DUP0020140 DUP0020240 DUP0040132 DUP0040232 DUP0042219 DUP0042721 DUP0070125 DUP0080125 DUP0080225 DUP0080316 DUP0080416 DUP0080422 DUP0081125 DUP0081225 DUP0081316 DUP0081416 DUP0081422 DUP0090125 DUP0090225 DUP0090325 DUP0090425 Adjustable Angle (0-90) ER20 Standard Adjustable Angle (0-90) ER25 Standard Adjustable Angle (0-90) Milling Head D=16mm, L=17mm Adjustable Angle (0-90) Milling Head D=3/4", L=3/4" Adjustable Angle (0-90) Milling Head D=22mm, L=19mm ERA40 Standard ERA40 Coolant Thru * ER32 Standard, VDI40, H100 ER32, VDI40, H100 Coolant Thru* VDI40, H100, Milling Head22x19 VDI40, H100, Milling Head 27x21 ER25 Standard VDI30 ER Standard VDI30, Right ER Standard VDI30, Right, Coolant Thru* WELDON 16 VDI30, Right 16X17 VDI30, Right 22X19 VDI30, Right ER Standard VDI30, Left ER Standard VDI30, Left, Coolant Thru* WELDON 16 VDI30, Left 16X17 VDI30, Left 22X19 VDI30, Left Radial Rear-Set ER25, VDI30 H=75, Right Radial Rear-Set ER25, VDI30 H=75, Right, Coolant Thru* Radial Rear-Set ERA25, VDI30 H=75, Right Radial Rear-Set ERA25, VDI30 H=75, Right, Coolant Thru* Radial Rear-Set Weldon16, VDI30 H=75, Right Radial Rear-Set ER25, VDI30 H=75, Left Radial Rear-Set ER25, VDI30 H=75, Left, Coolant Thru* Radial Rear-Set ERA25, VDI30 H=75, Left Radial Rear-Set ERA25, VDI30 H=75, Left, Coolant Thru* Radial Rear-Set Weldon16, VDI30 H=75, Left, Coolant Thru* Radial Rear-Set ER25, Right Radial Rear-Set ER25, Right, Coolant Thru* Radial Rear-Set ERA25, Right Radial Rear-Set ERA25, Right, Coolant Thru* Radial Rear-Set Weldon16, Right Radial Rear-Set ER25, Left Radial Rear-Set ER25, Left, Coolant Thru* 12 12 12 12 12 11 11 5 5 5 5 4 1 1 1 1 1 1 1 1 1 1 2 2 2 2 1 D DUP0090516 DUP0091125 DUP0091225 DUP0091325 DUP0091425 DUP0091516 DUP0100125 DUP0100225 DUP0100325 DUP0100425 DUP0100516 DUP0101125 DUP0101225 2 2 2 2 2 2 3 3 3 3 3 3 3 DUP0101325 DUP0101425 DUP0101516 DUP0110332 DUP0110432 DUP0130140 Radial Rear-Set ERA25, Left Radial Rear-Set ERA25, Left, Coolant Thru* Radial Rear-Set Weldon16, Left Radial Geared-Up 1:2 Driven, ERA32 Radial Geared-Up 1:2 Driven, ERA32, Coolant Thru* Radial MTSK Driven Tool VDI40 3 3 3 7 7 5 Table of Contents 0 A D G R V Alphabetized Listing 0-90 ADJUSTABLE ANGLE DRIVEN TOOL 9, 12 AXIAL DRIVEN TOOL AXIAL DRIVEN TOOL VDI30 AXIAL RE-DIRECTED DRIVEN TOOL 8, 11 4 8, 11 DRIVEN 1-13 GEAR HOBBER - LH GEAR HOBBER - RH GEARED-DOWN AXIAL RE-DIRECTED DRIVEN TOOL 13 12 9 RADIAL 4 HEAD DRIVEN TOOL RADIAL DRIVEN TOOL - LH RADIAL DRIVEN TOOL - RH RADIAL DRIVEN TOOL H=100 RADIAL DRIVEN TOOL VDI30 - LH RADIAL DRIVEN TOOL VDI30 - RH RADIAL GEARED-UP 1:2 DRIVEN TOOL VDI40 RADIAL MTSK DRIVEN TOOL VDI40 RADIAL REAR-SET DRIVEN TOOL - LH RADIAL REAR-SET DRIVEN TOOL - RH RADIAL REAR-SET DRIVEN VDI30 H=75 - LH RADIAL REAR-SET DRIVEN VDI30 H=75 - RH RADIAL REAR-SET DRIVEN VDI30 H=85 - LH RADIAL REAR-SET DRIVEN VDI30 H=85 - RH 10 10 10 5 1 1 7 5 6 6 2 2 3 3 VDI30 VDI40 VDI50 1-4 5-9 10-13
