The PASCO 550 Universal Interface…

Transcription

The PASCO 550 Universal Interface…
Physics
The PASCO 550 Universal Interface…
The most powerful wireless sensor interface for Physics
This is the interface with the measurement capability for any physics
experiment your physics lab needs. It features:
A 1 MHz sampling rate
A Use with other PASPORT interfaces
A 2 high-speed analog inputs
A Connect to computers via USB2
A 2 digital inputs for photogates and other timing sensors
A Wireless connectivity
A2 PASCO PASPORT sensor inputs
ASignal generator with built-in Voltage and Current
sensors.
With PASCO Capstone™ and the 550, your Physics
lab is equipped with high-speed data collection, signal
generation and power supply, oscilloscope and FFT
displays, timers, and more.
550 Universal Interface Specifications:
2 high-speed analog inputs
Measurement Range: ±10 V differential input
Input Impedance: 1 MΩ
Input Protection: ±250 V continuous
Selectable Voltage Gain: X1, X10, X100
Resolution: 14-bit, 0.12 mV
2 Digital Inputs
Digital sensors such as Photogates and Time-of-Flight
plug directly into the 550 Interface.
A C ompatible with all ScienceWorkshop digital sensors
A Sensor Connect Detection
A 0 -5 V TTL
A Bi-directional
Signal Generator
Waveforms: sine, triangle, square wave, positive and
negative ramps, DC
Frequency Range: 0.001 Hz to 100 kHz; 1 mHz resolution
Amplitude Range: ±8 V; Resolution: 1.33 mV, 12-bit DAC.
Max Output Current: 400 mA at 8 V, over-current detection
Selectable Voltage Limit
Selectable DC Offset
Frequency Sweep Function
Measure Output Current, Voltage
550 Universal Interface
UI-5001
Requires:
PASCO Capstone Software
2 PASPORT Inputs
Compatible with PASCO’s complete line of more
than 70 PASPORT sensors.
A S ample rates depend on sensors
Available
May 2015