(A2LA Certificate No. 1755.01) 12/17/2014 Page 1 of 3 SCOPE OF

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
INTERTEK TESTING SERVICES NA, INC.
1365 Adams Court
Menlo Park, CA 94025
Jay Y. Kogoma
Phone: (650) 463-2900
ELECTRICAL
Valid To: October 31, 2016
Certificate Number: 1755.01
In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to
this laboratory to perform the following product safety, photovoltaic, electromagnetic compatibility, and
NEBS testing:
Test:
Product Safety
ITE/Telecom
(Excluding Measurement of
Transient Levels, Flammable
Liquids, Cathode Ray Tubes,
Effect of UV Radiation on
Material, and Mandrel Test)
Test Method(s)1, 2:
IEC 60950; IEC 60950-1; IEC 62040-1-1; IEC 62040-1-2;
EN 60950; EN 60950-1; UL 1950; UL 60950; UL 60950-1;
UL 1778; CSA C22.2 No. 60950; CSA C22.2 No. 60950-1;
AS/NZS 60950; AS/NZS 60950.1
Medical
(Excluding Risk Assessment,
Cathode Ray Tube, Handtransmitted Vibration, Pressure
Vessels, and Protection Against
Hazards of Ignition of
Flammable Anesthetic
Mixtures)
IEC 60601-1; IEC 60601-1-1; IEC 60601-1-4; IEC 60601-1-6;
IEC 60601-1-8; IEC 60601-1-11; IEC 60601-2-2;
IEC 60601-2-22; IEC 60601-2-27; IEC 60601-2-38;
IEC 60601-2-46; EN 60601-1; UL 60601-1; AAMI ES60601-1;
CSA C22.2 No. 601.1; AS/NZS 3200
Laboratory
(Excluding UV Radiation and
Ultrasonic Pressure)
IEC 61010-1; IEC 61010-2-010; IEC 61010-2-081;
IEC 61010-2-101; EN 61010-1; UL 61010-1;
CSA C22.2 No. 1010.1; AS/NZS 61010
Laser Products
IEC 60825-1
Photovoltaic
(Excluding Fire and Hot-Spot
Endurance Tests)
UL 1703; ULC ORD C1703
(A2LA Certificate No. 1755.01) 12/17/2014
Page 1 of 3
Test:
Emissions
Radiated and Conducted
Test Method(s)1, 2:
CFR 47, Part 15, Subpart B (using ANSI C63.4:2009) and
Part 18 (using MP-5);
CISPR 11; EN 55011; AS/NZS CISPR 11; KN 11;
CAN/CSA-CEI/IEC CISPR 11; CNS 13803;
CISPR 22; EN 55022; AS/NZS CISPR 22;
CNS 13438 (up to 6 GHz); CAN/CSA-CEI/IEC CISPR 22;
KN 22; HKCA 1007; IEC/CISPR 32; EN 55032 (excluding
Annex 7.5, Annex 7.6, and Annex 12 for A/V I/O port emission
voltage test)
Current Harmonics
IEC/EN/KN 61000-3-2
Flicker and Fluctuations
IEC/EN/KN 61000-3-3
Transmitters and Receivers
(Below 40 GHz)
(excluding SAR)
CFR 47, Part 15, Subpart C, Subpart E (using ANSI C63.10:2009),
Part 22, Part 24, Part 27, Part 90, Part 95 (Using Part 2 and
ANSI/TIA 603-C-2004);
RSS-Gen; RSS-102; RSS-119; RSS-123; RSS-132; RSS-133;
RSS-134; RSS-135; RSS-137; RSS-192; RSS-195; RSS-197;
RSS-199; RSS-210; RSS-215; RSS-216;
EN 300 113; EN 300 220; EN 300 296; EN 300 328; EN 300 330;
EN 300 390; EN 300 440; EN 301 444; EN 301 893; EN 302 208;
EN 302 291; EN 302 502; EN 62311; EN 62479;
Radiocommunications (Short Range Devices) Standard 2004
A1 + A2:2013; AS/NZS 4268:2008;
IDA TS SRD; IDA TS UWB; IDA TS LMR;
TCVN 7189 (2009); QCVN 54:2011/BTTT; QCVN 55:2011/BTTT;
ARIB Standard STD-T66;
HKCA 1039; HKCA 1035; HKCA 1042; HKCA 1049;
NCC LP0002
Immunity
ESD
IEC/EN/KN 61000-4-2
Radiated Immunity
IEC/EN/KN 61000-4-3
Electrical Fast Transient/Burst
IEC/EN/KN 61000-4-4
Surge Immunity
IEC/EN/KN 61000-4-5
Conducted Immunity
IEC/EN/KN 61000-4-6
(A2LA Certificate No. 1755.01) 12/17/2014
Page 2 of 3
Test:
Test Method(s)1, 2:
Immunity (cont’d)
Power Frequency Magnetic
Field
IEC/EN/KN 61000-4-8
Voltage Dips, and Interruptions
Generic and Product Family
Standards
Generic and Product Specific
Laboratory Equipment
IEC/EN/KN 61000-4-11
EN 301 489-1; KN 301 489-01;
EN 301 489-3; KN 301 489-03;
EN 301 489-5; KN 301 489-05;
EN 301 489-17; KN 301 489-17;
EN 55024; CISPR 24; KN 24
IEC/EN 61326
Medical
IEC/EN 60601-1-2
Generic Residential
IEC/EN/KN 61000-6-3;
IEC/EN/KN 61000-6-1
Generic Industrial
IEC/EN/KN 61000-6-4;
IEC/EN/KN 61000-6-2;
ITE/Telecom
CISPR 24; EN 55024; KN 24; EN 300 386; IECS-003;
VCCI V-3 (up to 6 GHz)
NEBS
ESD
GR-1089-CORE, Section 2
Emissions
GR-1089-CORE, Section 3
Immunity
GR-1089-CORE, Section 3
Automated Demand Response
Open ADR
Open ADR 2.0A
Open ADR 2.0B
On the following products or types of products: Industrial, Scientific, Medical (ISM) Equipment,
Information Technology Equipment (ITE), Intentional Radiators, Telecommunications Unintentional
Radiators, Telco Control Office Equipment, Outside Plant, and Customer Premise Equipment
1
The laboratory is only accredited for testing activities outlined within the test methods listed
above. Reference to any other activity within these standards, such as risk management or risk
assessment, does not fall within the laboratory’s accredited capabilities.
2
When the date, revision or edition of a test method standard is not identified on the scope of
accreditation, the laboratory is required to be using the current version within one year of the date of
publication, per part C., Section 1 of A2LA R101 - General Requirements- Accreditation of ISO-IEC
17025 Laboratories.
(A2LA Certificate No. 1755.01) 12/17/2014
Page 3 of 3
A2LA has accredited
INTERTEK TESTING SERVICES NA INC.
Menlo Park, CA
for technical competence in the field of
Electrical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General Requirements for
the Competence of Testing and Calibration Laboratories. This accreditation demonstrates technical competence for a defined scope and the
operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009).
Presented this 17th day of December 2014.
_______________________
President & CEO
For the Accreditation Council
Certificate Number 1755.01
Valid to October 31, 2016
For the tests or types of tests to which this accreditation applies, please refer to the laboratory’s Electrical Scope of Accreditation.