Brochure hydex New - Hydax Hydraulics Pvt. Ltd.

Transcription

PRODUCT CATALOGUE
HYDRAULIC ACCESSORIES
Indigenous Technology
&
Innovative Designs
w w w . h y d a x i n d i a . c o m
FLUID LEVEL GAUGE (MODEL: SG 3/5)
TECHNICAL DATA
Hydax Fluid Level Gauge can be used on any reservoir containing mineral and
petroleum-based hydraulic fluids to indicate oil level.
Level gauges are available with or without temperature gauges and are available in two
sizes - 3" & 5" between bolt centres.They are easily readable through a magnifying sight
glass. These level gauges offer complete protection to any reservoir. There are also
options of heat dial / thermometer temperature indicators.
The Level Gauges are available ready to assemble. Only two holes are to be drilled onto
the tank to fix the level gauge.The outer case is Nickel chrome or Powder coated and
has a low profile.The temperature scale is in between 3O°C to 8O°C.
SALIENT FEATURES
·
·
·
·
·
·
·
The fluid-level gauge is available with heat dial or thermometer temperature indicator.
Complete with gaskets and attaching bolts - ready for immediate installation.
Can be installed from outside reservoir unit. Requires only 2 mounting holes.
Sturdy low profile outer case.
All external metal parts are plated/powder coated.
Extra large sight area and unbreakable clear glass provide high visibility.
These are suitable for use with all mineral and petroleum-based hydraulic fluids. Excellent for
hydraulic reservoirs, gear boxes, fuel tanks, lubrication reservoirs and crank cases.
Part No.
A
mm
B
mm
C
mm
D
mm
E
mm
F
mm
Bolt
Fixing
Thread Hole O
mm
Temperature
Range
°C °F
HA-SG-3
114
44
19
76
38
19
M-10
11
0.13
HA-SGT-3
114
41
19
76
38
19
M-10
11
0.13
HA-SG-5
178
51
25.5
127
45
19
M-12
13
HA-SGT-5
178
51
25
127
45
19
M-12
13
0.27
HA-SGD-5
178
51
25
127
45
19
M-12
13
0.27
+30+80 +86+176
Weight
Kgs.
0.27
HYDAX HYDRAULICS PVT. LTD.
19-A, Visveswaraiah Industrial Area, Mahadevapura Post, Bangalore - 560 048. Tel: +91-80-28524036 / 28475677
Mob: +91 9731274120 / +91 9611774047 E-mail: [email protected] / [email protected] www.hydaxindia.com
FLUID LEVEL GAUGE (MODEL: SGR - 3, 5, 7, 10, 14)
TECHNICAL DATA
Hydax introduces a newly designed Fluid Level Gauge of robust
construction, bigger size and 'O' Ring sealing made from aluminium and
glass-filled nylon. These level gauges are easy to install. Supplied in ready
assembled condition it needs drilling of 2 holes to instal the gauges.
Surface on which it is being installed should be level and of smooth finish.
Sizes available are 76mm, 127mm, 178mm, 254mm and 356mm between
bolt centres. These Level Gauges also have the options of heat dial /
thermometer temperature indicator.
Part No.
A
mm
B
mm
C
mm
D
mm
E
mm
F
mm
G
mm
H
mm
Bolt
Thread
Fixing
Hole O
HA-SGR-3
HA-SGRT-3
HA-SGRD-3
HA-SGR-5
HA-SGRT-5
HA-SGRD-5
HA-SGR-7
HA-SGRT-7
HA-SGRD-7
HA-SGR-10
HA-SGRT-10
HA-SGR-14
HA-SGRT-14
127
127
127
172
172
172
240
240
240
350
350
450
450
45
45
45
90
90
90
130
130
130
180
180
280
280
41
41
41
41
41
41
55
55
55
85
85
85
85
50
50
50
64
64
64
63
63
63
76
76
76
76
25.5
25.5
25.5
22.5
22.5
22.5
31
31
31
48
48
47
47
76
76
76
127
127
127
178
178
178
254
254
356
356
47
47
47
47
47
47
50
50
50
53
53
53
53
23
23
23
23
23
23
23
23
23
25
25
25
25
M-12
M-12
M-12
M-12
M-12
M-12
M-12
M-12
M-12
M-16
M-16
M-20
M-20
12.5
12.5
12.5
12.5
12.5
12.5
13
13
13
17
17
21
21
Temperature
Range
°C
°F
+30+80+86+176
Weight
Kgs.
0.25
0.25
0.25
0.35
0.35
0.35
0.7
0.7
0.7
1.7
1.7
1.9
1.9
FLEXIBLE DRIVE COUPLING
(MODEL: Hydax 19, 28, 38, 48, 65)
TECHNICAL DATA
The Hydax Flexible Drive Coupling consists of two gear hubs
engaging in a sleeve of high grade plastic material.This material
has superior strength and a wide operating temperature range.
The gears have crowned-tooth form which permit axial and
angular misalignment. The couplings have undergone extensive
testing under severe load conditions.They are easy to assemble
and require no maintenance or lubrication and do not emit
transmission noise. Available in non-corrosive options of
Stainless Steel and Nylon materials also
SALIENT FEATURES
l Applicable to all range of hydraulic equipment
and in the Transmission market.
l Maintenance free, no lubrication.
l Gears in the crowned-tooth form permit axial
and angular Misalignment.
l Cost effective and easy to assemble.
l Two drive hubs engaging in a sleeve.
l Compact and streamlined.
l Available in five sizes to suit 1HP to 75HP.
l Available in non-corrosive options of Stainless
Steel and Nylon materials also
ASSEMBLY PROCEDURE
Maximum permissible angular misalignment is 1.5 degrees. Ensure that
the coupling hubs easily fit on the shaft. Do not use undue force.
Maintain gap between hubs as shown in sketch. Use grub screws to
locate gear hubs on their respective shafts. For shock load applications
use the following formula:
HP of application x 100 x F
RPM of application
Rating / 100 RPM of coupling =
Hub withdrawal Clearance J:
E
F
J
H
D
E
C B A
K
Load Factor
EI Motor
1
1.25
1.75
Application
Uniform Load
Medium Shock
Heavy Shock
Load Factor (F)
IC Engines
1.2
1.5
2.0
L
Coupling
size
fA
fB
Max.
fC
D
E
F
G
H
J
Min.
fK
L
Pilot
Bore
HYDAX - 19
48
30
19
25
4
54
70
25
16
7
37
7
HYDAX - 28
66
44
28
40
4
84
104
40
20
12
46
12
HYDAX - 38
83
56
38
40
4
84
104
40
24
12
48
12
HYDAX - 48
100
68
48
50
6.5
104
126
50
22
15
50
15
HYDAX - 65
140
96
65
70
4
144
176
70
32
15
72
15
Specification for Hydax Flexible Drive Coupling
Coupling
Size
3000
RPM
Elec. Motor
Frame Size
1500
RPM
1000
RPM
750
RPM
Max. Torque
at 1500 RPM
kW
Hp
kW
Hp
kW
Hp
kW
Hp
Kg.M
Ft. Lbs
Max.
RPM
Hydax 19
80
90S, 90L
2.2
2
1.5
1
1.1
1
.75
1
.5
3.6
3000
Hydax 28
100L
112 M
7.5
10
5.5
5
4.25
5
2.2
3
2.3
16.6
3000
Hydax 38
132 S
132 M
10
13
7.5
10
5.5
7.5
3
4.5
7
4.9
3000
Hydax 48
160 M.L.
180 M.L.
22
30
18.5
25
15
20
11
15
14.4
104
3000
Hydax 65
200 L
250 M
55
75
55
75
37
50
30
40
35.5
256
3000
A - ALL PORTS ARE ¼” BSP
Pressure Port
MODEL CODE
A 50
GI - ** - PR
Tank Port
M-30
50
PUSH TO READ
f24
SS- SINGLE STATION
GAUGE ISOLATOR
Gauge Port
53
OPTIONAL
25
89
CIRCUIT SYMBOL
GAUGE ISOLATOR VALVE (MODEL: GI-SS-PR)
SINGLE STATION
TECHNICAL DATA
The Gauge Isolator Valves protect the pressure gauge from damaging pressure surges, hydraulic shock and
mechanical vibrations.The fluid is completely isolated from the gauge until the knob is pressed. By pressing the knob,
the fluid is connected directly to the gauge port giving instant and accurate readings on the gauge. As the knob is
released, the spring-loaded valve closes automatically connecting the gauge port to the drain and completely
blocking the pressure port. In operations, an orifice in the gauge port acts as a partial snubber, protecting the gauge
from the initial surge of fluid as the knob is pressed.
SALIENT FEATURES
3000 psi working pressure.
l
High-grade casting body.
l
Balanced spool.
l
Can be panel or line mounted.
l
Working temperature ranges from -30°F to 240°F.
l
It isolates the gauge from the system pressure.
l
High degree of safety.
l
Minimum force required to operate.
l
Easy plumbing into the system.
l
Meets most operating conditions.
l
100% testing under rigid parameters.
l
A guarantee of below 5 CC/min drain leakage in a new valve.
l
GAUGE ISOLATOR VALVE
(MODEL: GI MS PR /2/3/4)
MULTI STATION
TECHNICAL DATA
HYDAX introduces for the first time anywhere, single block 2, 3 or 4
stations gauge isolator valves. The valves are designed to prevent surge
damage to a gauge in all types of hydraulic circuits. The spring returned
facility is the same as in a single station valve. The high performance, low
drain leakage characteristic is maintained in the multi-station valves. Only
one gauge and one drain line for all the ports reduces plumbing and
additional instrumentation cost.The maximum pressure is upto 210 bar. The
customer can order as per individual requirement. All ports are ¼" BSP and
can be easily mounted on panels. All plumbing is from the rear.
120
O6.5
25
45
45
140
95
25
115
O6.5
ALL PORT SIZES 1/4” BSP
75
Gauge Isolator Valve. 2 Stations
165
100
25
25
25
100
OH
A
B
25
31.5
37.5
65
Drain Port
connect
directly to
tank
O6.5
150
45
Gauge
Port
D
25
25
Drain Port
connected
directly to
tank
Pressure Port
15
15
31.5
37.5
65
100
10
Gauge
Port
MODEL GI MS PR
Pressure Port
Pressure Port
C
65
100
10
Gauge Port
15
31.5
37.5
Sl. No.
Drain Port
connected
directly to
tank
25
25
25
125
25
Mounting & Cut out dimensions
for multi station
Dimensions
Model No.
A
B
C
D
OH
1
GI MS PR-2
84
45
95
25
6.5
2
GI MS PR-3
106
45
120
25
6.5
3
GI MS PR-4
136
45
150
25
6.5
FILLER BREATHER ASSEMBLY
(MODEL: FB-700-TT-40 / FB-250-TT-40)
TECHNICAL DATA
This is a combination unit for filtering air displacement from the reservoir and for
straining oil while filling. Mounting options include Tank Top and Side Mounting.
The displacement capacity is 250 LPM and 700 LPM and filtration is upto 40 microns.
The air displacement from underneath the cap assembly improves performance.
Power coated cap and nylon or nickel-chrome plated strainer body ensures
corrosion resistance.
The unit comes completely assembled with internal safety chain and fasteners.The
mounting surface should be free of burrs, flat and clean to provide a good sealing
surface for the flange.
It is for use with Hydraulic/Lubrication oil reservoir applications, including machine
tools, mobile equipment, industrial machinery, etc.
FILLER-BREATHER ASSEMBLY
Breather-filters are a must for hydraulic systems ensuring clean air passing into the reservoir, thus prolonging the life
of the system components.When used as a crankcase ventilator, it helps to prolong the life of the engine oil and the
oil filter. They are designed for use in machine tool construction, mining, marine and agricultural applications.
l
Specially designed slots provide for an extremely large amount of airflow through the
cap - ten times the amount of air flow as comparable with units now available (upto 700
litres per minute displacement).
l
Nylon strainer with a guard stronger than conventional materials will not corrode.
l
Compatible with all fluids.
l
Filtration upto 5 microns available (Standard supply : 40 microns).
l
It may be cleaned many times to provide efficient filtering action.
l
Powder Coated cap with safety chain.The safety chain retains the cap, so it will not be
misplaced or lost.Yet it is designed to allow removal of the cap when desired for cleaning
of filter element.
l
Slotted holes in strainer allow for easier alignment during installation.
l
All parts included in one package - ready to install.
l
Single hole reservoir installation range.
fA
fB
G
fD
E
Cut Out f53mm / 30mm
F
fC
Air Filter Element
Drill 4mm holes, 6 places on dia 72
Bolt circle for self trapping screws
(Drill 4 mm holes 3 places on
dia 41mm for small)
Removable Air Filter Cap
Safety Chain
Mounting Screw - 6 Nos. (3 Nos. for small)
Bayonet Plate
Filter Mounting Flange
Reservoir Cover
Oil Strainer
Note : Gasket not required
while using Plastic Strainer
FILLER BREATHER ASSEMBLY (Nylon)
FBN 700 TT 40
FBN 700 SM 40
FBN 250 SM 40
This assembly is a combination unit for filtering air displacement from the reservoir and straining oil while filling. It is for use
with Hydraulic/Lubrication oil reservoir applications, including machine tools, mobile equipment, industrial machinery,
construction, mining, marine and agricultural applications etc. Breather-filters are a must for hydraulic systems ensuring clean
air and oil passing into the reservoir, thus prolonging the life of the system components.When used as a crankcase ventilator, it
helps to prolong the life of the engine oil and the oil filter.
50.8
MODEL S.M
110
76.2
50.8
50.8
Features:
l
Mounting options are Tank Top and Side Mounting.
The displacement capacity is available in 250 LPM and 700 LPM
l
and filtration is upto 40 microns.
l
Entire body is light weight and corrosion resistant.
It is a complete, ready-to-install assembly with internal safety
l
chain and fasteners.
The mounting surface should be flat, clean and free of burrs to
l
provide a good sealing surface for the flange.
l
Specially designed slots provide for an extremely large amount
of airflow through the cap.
l
It is compatible with all fluids.
Filtration upto 5 microns available (Standard supply: 40
l
microns).
l
Slotted holes in strainer and flange allow for easier alignment
during installation.
l
Grooved design allows for better grip.
50.8
6 HOLES - f 7.2
Details for side mounting
THREADED BREATHER
(MODEL: BT)
TECHNICAL DATA
This is a unit for filtering air displacement from the reservoir.
Displacement capacity is from 250 LPM to 700 LPM
and filtration is upto 5 microns (Standard supply : 40 microns).
The air displacement from underneath the cap assembly
improves performance. Powder Coated finish ensures
corrosion resistance. For use with Hydraulic/Lubrication oil
reservoirs. Gear box applications include machine tools, mobile
equipment, industrial machinery, etc.
D
C
fA
B
MODEL
A
B THREAD
C
D
BT 250 UM 40
45 mm
1/4’’ BSP
38 mm
62 mm
BT 250 UM 40
45 mm
1/2’’ BSP
38 mm
62 mm
BT 700 UM 40
76 mm
M-12
48 mm
82 mm
BT 700 UM 40
76 mm
M-26
48 mm
82 mm
BT 700 UM 40
76 mm
M-30
48 mm
82 mm
BT 700 UM 40
76 mm
M-34
48 mm
82 mm
BT 700 UM 40
76 mm
½’’ BSP
48 mm
82 mm
BT 700 UM 40
76 mm
3/4’’ BSP
48 mm
82 mm
BT 700 UM 40
76 mm
1’’
48 mm
82 mm
BSP
RETURN LINE FILTERS (MODEL: RLF 04/05/06/08/10/12)
TECHNICAL DATA
H
The RLF series of low cost return line filters is intended for direct mounting on
hydraulic reservoirs. The low profile coupled with high flow ratings, helps in
mobile installations besides stationary applications like machine tools, plastic
machinery, etc.
I
A
L
G
B
Filter to Reservoir
Seal included
C
It requires one inlet fitting and discharges directly into the reservoir.The outlet
is suitable for hose connections. This results in considerable reduction in
installation cost.
A permanent magnet inside the filter and 25 micron filtration are standard.
Optional features include 10 micron filtration and visual clogging indicator as
per order.
The elements are made from high-grade impregnated paper to ensure nominal
desired micron ratings. Built in by-pass check valve preset at factory offers
protection under clogged conditions.
Type B
Type A
E
E
45°
D
Optional
Indicator Positions
Specify when ordering
Return Line Flow
TANK
SALIENT FEATURES
Direct tank top mounting.
l
All aluminium body and cover.
l
Filtration from 10 microns to 25 microns.
l
For flows upto 450 lpm - 6 sizes.
l
Low installation cost.
l
10 BAR maximum pressure.
l
Interchangeable elements with competitive models.
l
Visual Mechanical and Digital clogging indicators available
l
Easy replacement of cartridge without disturbing plumbing.
l
With by-pass check value.
l
Easy installation.
l
Low profile tank top assembly.
l
Generous filtration area for longer intervals between
l
cartridge changes.
Built-in strong ferrite magnet keeps ferrous particles out of the system.
l
RETURN LINE FILTERS
(MODEL: RLF 04/05/06/08/10/12)
Port to port pressure drop with clean element oil
viscosity 150 SUS ( 28 CENTISTOKES)
BAR PSI
12
0.70
10
8
0.45
5
12.2
14
RL
F
0.95
RL
F1
2. 1 0
16
0.2
5
18
RL
F1
1.20
CRLF
RLF
RLF04.10
0
RL 6.10/RLF04
.25
F0
6 .2
5
/
RLF
RL
F
08.1
0
RL 08.2
5
F1
0 .1
0
20
6
4
0.13
2
0
GPM
LTR/MIN
0
5
10 15
20 25
30 35
40 45
19
57
95
133
171
50 55 60 65
209
70
247
75 80 85
284
322
90 95 100 105 110 115 120 125 130 140
360
397
435
473
511
DESIGN
TYPE
FILTER
(BASIC)
PORT SIZE
A
FB
C
FD
FE
TYPE A
RLF 04
½”BSP
67
78
96
TYPE A
RLF 05
¾” BSP
67
128
100
TYPE A
RLF 06
¾” BSP
89
93
118
8.4
27.5
9.9
69
34.5
136
118
8.4
27.5
9.9
69
34.5
28.5
0.90 KG
10.4
40
12
95
45.5
35
2.27 KG
12
95
45.5
35
TYPE A
RLF 08
1” BSP
89
TYPE A
RLF 10
1¼” BSP
130
230
175
TYPE A
RLF 12
1½” BSP
130
300
175
FF
G
H
8.4
27.5
7.5
6.8
23
7.5
10.4
MODEL CODE
COMPLETE FILTER
RLF
Series
**
Size
04 - ½” BSP
06 - ¾” BSP
08 - 1 “ BSP
10 - 1¼” BSP
12 - 1½” BSP
40
I
L
51.5
28.5
22
0.60 KG
54
28.5
22
6.65 KG
28.5
WEIGHT
0.80 KG
2.70 KG
REPLACEMENT CARTRIDGE
**
TT
Filtration
Rating
10 Microns
25 Micron
**
VI-Visual
Indicator
Omit when
not required
CRLF
**
Size
06
08
10
12
**
Filtration
Rating
10 Micron
25 Micron
Note: Use Synthetic Rubber hose (ID=F) with Jubilee Clip to ensure return line is immersed in oil.
SUCTION STRAINER (MODEL: SS)
TECHNICAL DATA
A complete range of Suction Strainers suitable for flows from 15 LPM (3gpm) to
450 LPM (100gpm).The standard filtration is upto 125 microns.The construction
incorporates a stainless steel filtering media with a steel back-up perforated sheet
held together with free flow epoxy bonding material.
These are reusable elements and can be cleaned with petrol or similar fluids.
Suitable for hydraulic fluids, coolants, cutting fluids and mineral oils. Maximum
temperature is 90°C.
SALIENT FEATURES
HYDAX offers a complete range of suction strainers for
l
use with hydraulic fluids, lubricants, coolants, cutting oil, etc.
125 micron filtering to give maximum efficiency at full flow.
l
Plated inner support, high grade plastic/aluminium alloy/sheet metal top with stainless
l
steel filter core (not affected by fluids).
The head adapter is a one-piece construction to eliminate the nut breaking off.
l
Can withstand extreme low pressure drops.
l
Continuous epoxy bond joints.
l
Protects pump and system components.
l
Extends life and reduces breakdown for continuous equipment operation.Maximum
l
working temperature of 90°C.
For all mineral and petroleum-based fluids.
l
THREAD
T
Available in 9 sizes for flows upto 450 LPM.
l
D
SYMBOL
L
A
OIL LEVEL
Model
INSTALLATION DATA
15 L
15 L spl
30 L
60 L
90 L
125 L
160 L
200 L
250 L
250 L spl
300 L
340 L
450 L
Capacity
LPM
A.A/F
15
32
15
36
30
36
60
45
90
60
125
60
160
60
200
68
250
68
250
70
300
70
340
84
450
100
D
52
63
63
63
90
90
90
90
90
140
140
140
140
L
87
62
120
160
125
190
230
270
311
170
260
290
340
T
½" BSP
¾" BSP
¾" BSP
1" BSP
1½" BSP
1½" BSP
1½" BSP
2" BSP
2" BSP
2" BSP
2½" BSP
2½" BSP
3" BSP
Filtration
Area M²
0.03
0.027
0.05
0.07
0.09
0.13
0.16
0.19
0.22
0.25
0.29
0.32
0.45
PRESSURE LINE FILTERS (MODEL : PLF - 03-")
The highly compact Pressure Line Filter is ideal for applications in
simpler hydraulic systems. It provides reliable protection to dirt
sensitive components. Due to the use of a sintered bronze filter
cartridge, it provides absolute filtration.
The body and cover are made of high strength castings with nitrite
rubber seal. The filtration elements are available in 10, 25 & 75
micron ratings respectively. To prevent any contamination gaining
entry into the system, no by-pass valve is provided.
The maximum working pressure is 140 bar and the capacity is 20
LPM
INLET PORT NPT-3/8"
f50
Body
OUT LINE Drg. Of ‘PLF’
Cover
3.0
F80
OUTLET PORT NPT-3/8"
2.0
p(kgf/cm²
-10
PL
3
F-0
-25
-03
PLF
1.0
0.8
5
-03-7
PLF
0.6
MODEL
CODE
FILTRATION
CAPACITY
(Microns)
PLF-03-10
PLF-03-25
PLF-03-75
10
25
75
0.4
CAPACITY : 20 LPM
0.2
0
5
10
15
20
PRESSURE : 140 Kg/Cm²
Q Liters/min
Pressure drop cur
ve
Warning
The filter elements are likely to clog faster, because of absolute filtration and the absence of a by -pass valve.
Therefore, the use of higher micron (75) filtering elements are recommended, especially where a very high
degree of system cleanliness is not maintained.
IN-LINE FILTERS (MODEL: ILF)
TECHNICAL DATA
The HYDAX Inline Filter is designed for use with all types of mineral and
petroleum-based hydraulic fluids and is available from flows of 60LPM to 130LPM.
It can be connected anywhere in the return line of hydraulic systems.
The high-grade aluminium body and cast iron cover withstand higher
pressure than normal return line filters.The built-in by-pass valve opens when
the filter element is clogged. A permanent magnet inside the filter and 25
microns filtration are standard. (optional is 10 microns).
SALIENT FEATURES
High-grade casting body and cover.
l
Maximum rated flow of 130 LPM.
l
Filtration upto 25 microns, 10 microns optional.
l
Maximum operating pressure is 15 Kg/cm2
l
In-line mounting.
l
Built-in check valve.
l
170
226
T
T LE
OU SP
B
1"
PRESSURE DROP Kg/cm2
T
LE
IN BSP
"
1
1.2
1.0
0.8
0.6
0.4
0.2
10
f98
20
30
40
50
60
70
80
FLOW LITRES / MIN
MODEL
CODE
ILF-60-08-10
ILF-75-08-25
ILF-130-08-25
FILTRATION CAPACITY
( MICRONS)
FLOW CAPACITY
LPM
PRESSURE
MAX Kg/ cm2
10
25
25
60
75
130
15
15
15
ILF 600
The Hydax In-line Filter model ILF is an all-cast construction
and is made from superior grade castings. These filters are rated for
working pressures upto 20 kg/cm and the filtration is of 25 or
10 microns. The maximum flow capacity is 600 LPM with fluid
viscosity of 80 SSU at 40° C. The port connections range from 1BSP to 3 BSP"
round flange.
Strong ferrite magnets are provided inside the cartridge flow path to arrest
ferrous particles.
Adequate internal area is provided to minimize pressure drop.
290
f235
Cover
550
M12 X 6 nOS.
PCD 120
Filter
Element
Pressure Drop Bar
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
Pressure Drop Curve with Clean Element
f76.2
f145
Body
100
200
300
400
500
600
Flow - ltrs/min
Filter Model - ILF-600 - 25
0
Fuel Viscosity 80 SSU at 40C
f187
76.2
27
51
13
40.9
28
25.4
Mounting f 8.5
SINGLE PILOT CHECK VALVE
86.2
(MODEL: PCV - 03T)
APPLICATION
The Single Pilot Check Valve is used to lock a cylinder or part of a circuit and to prevent reverse flow until the pilot
pressure is applied.
OPERATION
In a free flow direction through the inlet, the ball is unseated and the flow is out of the cylinder port. When the
control valve is centered, the load is locked.
With pressure applied at the pilot piston, the ball is held open, allowing return flow.
This is internally piloted.
FEATURES
The damped pilot piston reduces damaging shocks and has easily replaceable seats in some models.
The directional valve cylinder ports should be connected to the tank in the centre condition.
SPECIFICATIONS:
Materials :
Body
:
Extruded aluminium alloy,
Internal parts
:
Hardened steel.
Rated Flow
:
30 LPM
Working Pressure
:
210 Kg/cm2
Ratio
:
4:1
Weight
:
0.33 Kg
All ports 3/8” NPT
3 Holes
f8.5
35
15
15
100
30
15
70
50
DOUBLE PILOT CHECK VALVE (MODEL: DaPCV-03T)
APPLICATION
25.4
The Double Pilot Check Valve is used to lock a cylinder or part of a circuit and to prevent reverse flow until pilot
pressure is applied.
OPERATION
In a free flow direction through the inlet, the ball is unseated
the flow is out of the cylinder port.When the control valve is
centered, the load is locked.
With pressure applied at the pilot piston, the ball is held open,
allowing return flow.
70
This is internally piloted.
FEATURES
The damped pilot piston reduces damaging shocks and has
easily replaceable seats in some models.The directional valve
cylinder ports should be connected to the tank in the centre
condition.
SPECIFICATIONS:
Materials :
Body
:
Extruded aluminium alloy,
Internal parts
:
Hardened steel.
Rated Flow
:
30 LPM
Working Pressure
:
210 Kg/cm
Ratio
:
4:1
Weight
:
0.48 Kg
2
All ports 3/8” NPT
Pressure Gauge
Bleeding Screw
/ " BSP
male swivel
5 8
Operating Screw
Hose adaptor ¼" B.S.P
male swivel (to connect hose)
118
96
Hose
2 mtr length
¼" BSP swivel nut for screw connector
to accumulator "Type A"
5/8" UNF swivel nut for screw connector
to accumulator "Type B"
¼" BSP female swivel
ACCUMULATOR CHARGING AND GAUGING ASSEMBLY
(MODEL : ACGA)
TECHNICAL DATA
This assembly is used for periodic checking and charging of
accumulator pressure. A steel body construction is provided
with charging valves and a pressure gauge. The assembly is
suitable for pressures upto 210 bar. A two metres long high
pressure hose pipe is provided with the assembly.
The unit is designed for periodic use and should not be
connected permanently to any accumulator. A ¼" BSP female
swivel nut is standard supply. An optional 5/8" UNF connection
can also be provided.
EYE BOLT
300,0000
THREADED STEEL KNOB
TOP PLATE
O RING SEAL
UPPER SEAL PLATE
TIE ROD
DIM(A)
BARREL
LOVER SEAL PLATE
O RING SEAL
BOTTOM PLATE
152
INLET 2” BSP
CARTRIDGE FILTER HOUSING
OUTLET 2” BSP
TECHNICAL DATA
The FWH series fiter housings are suitable for flow rates upto 900 LPM using
10" to 40" cartridge filters.The flow capacity of the housings in standard series
EYE BOLT
LEG
TOP VIEW
3 ELEMENT HOUSING
3l0 FWH upto 110 LPM
320 FWH upto 220 LPM
6 ELEMENT HOUSING
BOTTOM VIEW
DIN
482mm : for 10” Long DOE cartridge
The housing is made of Fiberglass Reinforced Plastic (FRP) and the housings have an internal lining. The inlet and
outlet ports are located at the bottom cover and have BSP threading.The design provides for easy disassembling in
order to clean and change the cartridge.The housings are suitable to accommodate double open ended (DOE) and
'O' Ring cartridge configurations.
2
2
While the housings are rated for working pressure of 10 kg/cm and tested upto 20 kg/cm, higher pressure rated
ones too can be made in case of specific requirements. Suitable for temperature ranges upto 50°C.The externals are
made of anodised aluminium or stainless steel.A provision for vent and pressure gauge has been provided.
SALIENT FEATURES
1. A glass filter/epoxy bonded outer layers with food grade lining inside.
2. Test pressure upto 20 kg/cm.2
3. Available in tierod version or flanged version with bolt and nut.
4. All internal components are made of food grade compatible material.
5. The 3-element housings have 1½" BSP connections and the 6-element ones have 2" BSP connections
for the inlet and outlet.
6. Both the inlet and outlet are from the bottom of housing.
7. A suitable pressure gauge port and vent port is provided on top of the flange.
8. It can accommodate standard 62 mm OD double open ended (DOE) elements.
9. Optional 40 kg/cm2housings can be made available.
HYDAX HYDRAULICS was established in the year 1979, by Mr. D.B
Mukherjee, a technocrat with over 40 years of expertise behind him. The concept
right from the onset has been to create products that are indigenously designed,
technologically superior and commercially viable.
Using our available resources and applying sustained efforts, we have designed
and supplied products that are at par with products available in the world market.
From the field of agriculture, construction and mining to marine, machine tool and
mobile equipment, HYDAX caters to a wide spectrum of customers with products
that are easy to install at very competitive prices. Our evenly spread network of
stockists, assures the customer of prompt delivery and easy availability of goods
and our list of clients reads like the Who’s who’s of Indian industry. Giant private
and public sector companies as well as small to medium machine manufactures
form the impressive list of satisfied customers.
The hallmark of our establishment is Innovation, Quality and Reliability. We are
constantly upgrading our products keeping pace with the rapidly advancing Fluid
Power industry. Underlying all of the above, providing gainful employment to
people in a conducive atmosphere, has been the driving ethos through the last 33
years.
®
P.O. Box 4824, Mahadevapura, Bangalore - 560 048.
Works : 19-A, Visveswaraiah Industrial Area, Mahadevapura Post, Bangalore - 560 048.
Tel: +91-80-28524036 / 28475677 Mob: +91 9731274120 / +91 9611774047
E-mail: [email protected] / [email protected] www.hydaxindia.com
w w w . h y d a x i n d i a . c o m

Brochure hydex New - Hydax Hydraulics Pvt. Ltd.

Transcription

Similar documents

Datasheet - Esi

S 2014 A

For accurate sampling of boiler water Sample coolers

Home Biology Medicine Technology

AUTOMATIC AIR VENT FIG 1

Norzagaray High

Oxygen Regulators - Precision Medical

Oxygen Regulators - Precision Medical

Sun Hydraulics` First Publication in pdf format