sl-Fs - Wipotec

technical data
High precision Weigh Cell | SL-FS
technical data
High precision Weigh Cell | Sl-FS
descriptions
FEATURES
OPTIONS
The series SL-FS Weigh Cells cover the weighing range up
SS Weighing range up to 1,000 g, covered by 2 models
SS Option 10: RS 422 instead of CAN interface
to 1,000 g. They have been specifically designed as com-
SS Additive dead load range up to 350 g
SS Option 11: Bus operation
pact sensor components, meaning they are especially
SS Slim construction
SS Option 12: Higher display resolution
suited for installation into multi-track applications and
SS Multi-track applications starting from 30 mm SS Option 13: Binary I/O channels (4-fold)
everywhere where small frame sizes are demanded.
SS Option 14: Filling algorithm
centerline distance
SS Binary I/O channels with customer-specific functions
SS Option 25: Dead load compensation
By using GMP-tailored construction, all Weigh Cells are also
SS Interface 1: CAN
SS Option 34: Interface connection below
suitable for use in pharmaceutical industrial plants.
SS Interface 2: RS 232 for service and configuration
SS Sampling rate 1 ms
With the optional CFI (CAN Fieldbus Interface) it is possible
The Weigh Cell comes standard equipped to supply final
to connect to a variety of industrial fieldbus systems.
weighing values via a CAN interface as ready to connect
Please see specifications on our website.
modular components. The integrated software filters can
be configured in many ways, enabling optimal adaptation
of the weighing system to the respective ambient conditions. The Weigh Cells extensive command set facilitates
TO BE USED IN
SS Filling machines for vials, syringes, coffee pads, etc.
SS Packaging machines
simplified control engineering integration. Complemented
by a variety of options, the Weigh Cell can also fulfill very
weight
specific requirements.
Conventional load cell
Wipotec Weigh Cell
High level load cell
settling time
technical data
all data in summary | Sl-FS
Weigh Cell type
SL 250/150-FS
SL 1000/350-FS
Weighing range
250 g
1,000 g
50 - 150 g
50 - 350 g
0.002 g
0.01 g
0.001 g
0.005 g
± 0.002 g
± 0.01 g
0.001 g
0.005 g
40 mm
80 mm
Electrically adjustable dead load range
Display value (d)
Display value (d) with higher resolution (Option)
3)
Linearity ≤
1)
Repeatability (S) ≤
Maximum diameter of weighing platform
1) 2)
Settling time (on 1‰ of final value)
< 150 ms
Protection class of the Weigh Cell
IP 44
Temperature range
+5 °C to +30 °C
Power supply
24 V DC, ± 5 %
Weight
apporx. 1,800 g
Interface 1
CAN, RS 422
Interface 2
RS 232
Housing material
Aluminum hard coated with stainless steel side cover AISI 304
1) Depends on the preference settings and on setup and ambient conditions of the system | The absolute repeatability is +/- 3 s
2) Weighing time = settling time plus (adjustable) measuring time
3) Temperature range: +10 °C to +30 °C
Customer specific variations on request
SL-FS
technical data
dimensions | SL-FS
18
M5
12,5
235
Headquarters
30
Wipotec GmbH
Adam-Hoffmann-Str. 26
67657 Kaiserslautern, Germany
T +49.631.34146-0
F +49.631.34146-8640
[email protected]
www.wipotec.com
140
Italy
Wipotec Italia s.r.l.
Via Antonio Gramsci, 18
20016 Pero (MI), Italy
T +39.02.73952424
F +39.02.45508075
[email protected]
www.wipotec.it
110
150,5
1
30
2
260
USA
1: Schnittstelle
1
Wipotec North America
2: Schnittstelle
2
1: Interface 1
2: Interface 2
All measurements in mm
18
29,5
18
26
29,5
M3
Subject to technical modifications
2014-11-EN-SL-FS
700 Old Roswell Lakes Parkway,
Suite 200
Roswell, Georgia 30076, USA
T +1.770.971.5414
F +1.770.509.5524
[email protected]
www.wipotec.com