GigaVUE-VM // Data Sheet
Transcription
GigaVUE-VM // Data Sheet
GigaVUE-VM // Data Sheet Product Description The Gigamon GigaVUE-VM Visibility Fabric™ node provides an intelligent filtering technology that allows specific virtual machine (VM) traffic flows of interest to be selected, forwarded, and delivered to the monitoring infrastructure (Application, Network, Security) tools, effectively removing any traffic blind spots in the virtualized infrastructure. As a VMware vSphere guest VM, the small footprint GigaVUE-VM fabric node is installed without the need for special software, invasive agents, kernel modules, or changes to the hypervisor. With this solution, your organization can now achieve the same packet-level traffic visibility between virtualized applications as is normally available between discrete physical applications and servers. GigaVUE-FM (Fabric Manager), Gigamon’s centralized management application, tightly integrates with VMware vCenter to facilitate simplified bulk onboarding of the GigaVUE-VM fabric nodes and configuration of the VM level traffic monitoring policies. Leveraging vCenter APIs, GigaVUE-FM fabric manager can track vMotion events across Distributed Resource Scheduler (DRS) and High Availability (HA) cluster environments, enabling visibility policies to be tied to the monitored VMs and migrate with the VMs as they move across physical hosts. This automation enables the synchronization of monitoring policies, providing active visibility into an agile and dynamic Software-Defined Data Center (SDDC). GigaVUE-VM fabric nodes tightly integrate with best-of-breed virtual switching including Virtual Standard Switch (vSS), Virtual Distributed Switch (vDS) and Cisco Nexus 1000V. GigaVUE-VM also extends traffic visibility to the VMs deployed on the VMware NSX-V network hypervisor, a network virtualization platform that delivers the operational model of a virtual machine for the network by creating virtual/overlay virtual networks using VXLAN encapsulation protocols for traffic segmentation. To get complete traffic visibility into these virtual/overlay networks, GigaSMART® features like header stripping and Adaptive Packet Filtering can be used to de-capsulate the traffic and provide tenant level filtering. Having an end-to-end solution that provides traffic visibility into both the physical and virtualized infrastructures empowers the infrastructure administrators and operators with the insight needed to ensure service quality, security compliancy, and maintain business continuity. Table 1: Features & Benefits Feature Benefit Visibility into VM Traffic Intelligent selection, filtering, and forwarding of VM traffic to the “Monitoring and Tool Infrastructure”; extend the reach and leverage of existing tools to monitor virtual network infrastructure Support for Packet Slicing Conserve “production network backhaul” and optimize monitoring infrastructure processing by slicing VM traffic at required offset, before forwarding it for analysis Integration with Visibility Seamless end-to-end visibility across physical and virtual network infrastructure. Optimize monitoring infrastructure by Fabric Architecture enabling aggregation, replication, and sharing of traffic streams across multiple monitoring tools and IT teams. Additional Flow Mapping® and GigaSMART® intelligence can be applied on the virtual traffic before forwarding the tools. Gigamon and ERSPAN Leverage your production network to tunnel and forward the filtered virtual traffic from the hypervisor to the GigaVUE Tunneling Support platforms; tenant-based IP Tunneling facilitates isolation, privacy, and compliance of monitoring traffic Support for vMotion Ensure the integrity of visibility and monitoring policies in a dynamic infrastructure, have real-time adjustment of monitoring and security posture to virtual network changes, and the ability to respond to disasters/failures without losing NOC insight and control © 2013-2014 Gigamon. All rights reserved. 1 GigaVUE-VM // Data Sheet Table 1: Features & Benefits (continued) Feature Benefits Support for VMware vSS, Maintain end-to-end compliance, security, and monitoring in environments including VMware and Cisco virtual switches vDS, NSX vSwitch and Cisco Nexus 1000V Centralized Management Reduce OPEX by maintaining and configuring multiple instances of GigaVUE-VM fabric nodes using GigaVUE-FM. Seamlessly install GigaVUE-VM fabric nodes across hundreds of ESXi or NSX-V hosts leveraging the bulk deployment capabilities of GigaVUE-FM The GigaVUE-VM Visibility Fabric Architecture The following describes the minimum requirements for the hardware on which VMware ESXi or NSX runs GigaVUE-VM fabric nodes. Table 2: Hardware Requirements: Requirement Hypervisor Description • VMware vSphere 5.0 and above • VMware NSX-V (vSphere NSX) 6.0.5 and above CPU • One or more 64-bit x86 CPUs with virtualization assist (Intel-VT or AMD-V) enabled RAM • At least 8GB Network • At least one 1 Gbps NIC © 2013-2014 Gigamon. All rights reserved. 2 GigaVUE-VM // Data Sheet The following table lists the virtual computing resources that the VMware ESXi server must provide for each GigaVUE-VM fabric node instance. Table 3: Computing Requirements Requirement Description Memory • Minimum 2GB memory Virtual CPU (VCPU) • One (1) Virtual Storage for OS • 4GB using Virtual IDE Virtual Network Interfaces • Maximum: 10 Network Adapters • Network Adapter 1: GigaVUE-VM Management Port • Network Adapter 2: GigaVUE-VM Tunneling Port • Network Adapters 3 – 10: GigaVUE-VM Network Ports Table 4: Ordering Information Part Number Description GFM-VM010 GigaVUE-VM 10 Pack Bundle SW License Extension GFM-VM050 GigaVUE-VM 50 Pack Bundle SW License Extension GFM-VM100 GigaVUE-VM 100 Pack Bundle SW License Extension GFM-VM250 GigaVUE-VM 250 Pack Bundle SW License Extension SVC-000 12 Months Standard Support and Software Maintenance SVC-001 1st Year Premium 24x7 Upgrade SVC-002 12 Months Premium 24x7 Support and Software Maintenance For More Information For more information about the Gigamon Visibility Fabric architecture or to contact your local representative, please visit: www.gigamon.com © 2013-2014 Gigamon. All rights reserved. Gigamon and the Gigamon logo are trademarks of Gigamon in the United States and/or other countries. Gigamon trademarks can be found at www.gigamon.com/legal-trademarks. All other trademarks are the trademarks of their respective owners. Gigamon reserves the right to change, modify, transfer, or otherwise revise this publication without notice. Gigamon® | 3300 Olcott Street, Santa Clara, CA 95054 USA | PH +1 (408) 831-4000 | www.gigamon.com 4022-05 10/14