For Orders and Questions: Phone - Fire

Transcription

For Orders and Questions: Phone - Fire
INTRODUCTION
“I have no ambition in this world but
one, and that is to be a firefighter.
The position may, in the eyes of some,
appear to be a lowly one; but we who
know the work which the firefighter has
to do believe that his is a noble calling.
There is an adage which says that,
"Nothing can be destroyed except by
fire." We strive to preserve from
destruction the wealth of the world
which is the product of the industry of
men, necessary for the comfort of both
the rich and the poor. We are
defenders from fires of the art which
has beautified the world, the product of
the genius of men and the means of
refinement of mankind. But, above all;
our proudest endeavor is to save lives
of men - the work of God Himself.
Under the impulse of such thoughts, the
nobility of the occupation thrills us and
stimulates us to deeds of daring, even
at the supreme sacrifice. Such
considerations may not strike the
average mind, but they are sufficient to
fill to the limit our ambition in life and to
make us serve the general purpose of
human society.”
CELEBRATING OVER 100 YEARS OF FAITHFUL SERVICE
1911-2014
We wish to thank our loyal customers
who have allowed us to serve them for
the past 100+ years. It is our company
goal to be your number one supplier for
the next 100 years... and longer.
Your past and continued business is
greatly appreciated.
We are also extremely excited to
announce that we will be launching a
brand new FIRE-END website later
this year - stay tuned!!
WHAT'S NEW FOR 2014
-- Chief Edward F. Croker, FDNY,
circa 1910
Light Shield
Helmet Lights
Page 32
******************************
“Firemen are going to get killed. When
they join the department they face that
fact. When a man becomes a fireman
his greatest act of bravery has been
accomplished. What he does after that
is all in the line of work. They were not
thinking of getting killed when they went
where death lurked. They went there to
put the fire out, and got killed.
Firefighters do not regard themselves
as heroes because they do what the
business requires.”
PBI Max
Pages 4-5
Haix
Special
Fighter
USAR
Page 36
LION
Rebel
Gloves
Page 24
LION
Commander
Gloves
Page 24
Akron
Scenestar
Lights
Page 104
-- Chief Edward F. Croker, FDNY,
speaking upon the death of a deputy
chief and four firefighters in
February of 1908
Haix
Airpower® XR1
Page 36
Akron Avenger
Nozzles
Page 76
Rock N Rescue
Page 51
V-Force® PBI Max™ Turnouts
TAKING IT TO THE MAX!
LION
V-Force® Turnouts
with PBI Max™
Maximum Protection, Durability,
Mobility & Comfort
LION V-Force® takes the best technology from combat and
professional sports clothing and applies it to turnout gear.
The result is the optimum balance of mobility and protection.
Additionally, LION’s exclusive V-Fit™ design makes V-Force®
more comfortable than common firefighter gear.
PBI Max, designed by Safety Components for firefighters, is
the most comfortable and the most flexible outer shell ever
created. PBI Max combined with Glide Thermal liner
produces the most durable, most protective, and most
comfortable lightweight system for turnout gear.
The NFPA 1971 (2013 edition)-compliant PBI Max™ outer
shell offers firefighters the best combination of break open
and thermal protection, the strongest outer shell fabric in the
world and the most flexible and comfortable outer shell fabric
the fire service has ever seen.
Always on the cutting-edge, V-Force® is the first turnout
model to incorporate Glide™ liners and PBI® Max outer
shells.
Major PBI Max™ Features:
four times greater trap tear
PBI Max Specs:
strength than competitve PBI fabrics.
• 30% 600 denier DuPont™
Blend: 70% “PBI-Dominant” PBI
Kevlar® filaments — that’s 3 times more
• A patented LION isodri® outer shell for
DuPont™ Kevlar® spun yarns, 30% 600
than other PBI outer shells.
fast drying time and reduced
denier DuPont™ Kevlar® Filament
working weight.
Weight: 7.0 oz. (sq. yd.)
• An exclusive use of 600 denier ballistic
4
Dupont™ Kevlar® filament for increased
• Backed by the world’s first and only PBI
tear resistance and up to
5-year warranty (covering rips & tears).
Weave: Comfort Twill
Color: Natural & Black
Finish: DuPont™ Teflon® F-PPE
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
V-Force® PBI Max™ Turnouts
Glide™ Thermal Liners
Now Have DuPont™
Kevlar® Filament
V-Force® PBI Max™
Turnout Coat & Pants
Glide™ is the only liner system that features a
face cloth with 60% Kevlar® filament.
The low friction properties of Glide™ means
added freedom of movement and less
working stress for a more comfortable feel in
your turnout gear.
• Easy donning and doffing and more
comfortable feel.
• Glide™ is a component of the isodri® liner
system that has fast drying time, always ready
when you are.
• 60% Kevlar® face cloth for increased thermal
stability, strength and durability.
How does having a LION isodri®
protective system in your turnout
gear benefit you?
LION’s patented isodri® option is more than
just an outer shell that resists water
penetration and absorption. Instead, it is a
complete system of components (outer shell,
moisture barrier, thermal barrier and wristlets)
that works together to reduce the water in
your turnout gear and the dangers that water
presents — including dangerous steam burn
hazards frequently associated with firefighting.
Firefighters wearing LION Janesville® gear
with isodri® protective systems report that their
gear dries and is comfortable in less than 30
minutes!
Call us for your demo today!
See Pages 10-11 for PBI Max Pricing
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
5
WHY ISODRI?
6
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
WHY ISODRI?
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
7
LION TRADITIONAL
Traditional
Coat & Pant
NOMEX®
Starting at $975
Advance®
Starting at $1050
Traditional Turnout Gear
Full protection and exceptional durability in a traditional design
CBGM-D9 - 35” or 38" Length Coat
• D9 Chambray Pure quilted liner with breathable moisture
barrier by W.L. Gore
NOMEX®
Starting at $575
Advance®
Starting at $615
Coat Features:
• Leather elbow, cuff and shoulder reinforcements
• 3" contoured collar
• Hook & dee storm flap closure with FR Velcro® coat closure
• 4" Kevlar®/Spandex® wristlets
• Drag Rescue Device (DRD)
• Lion's exclusive Semper Dri™ System
• Liner Inspection System
• CPP000 10" x 10" Pair Patch Pockets
• 2-3" NFPA Ventilated Scotchlite Trim (Lime Yellow or Red Orange)
PBGM-D9 Pant
• D9 Chambray Pure quilted liner with breathable moisture
barrier by W.L. Gore
NOMEX®
Starting at $400
Advance®
Starting at $435
Pant Features:
• Traditional waist
• Leather knee reinforcements
• Leather cuff reinforcements
• Freedom® Knee
• FR Velcro® storm fly closure with hook & dee fastener
• Lion's exclusive Semper Dri™ System
• Liner Inspection System
• SBP552 8" x 8" x 2" Pair Kevlar® Lined Semi-Bellow Pockets
• 2" Ventilated Scotchlite Trim around Cuff (Lime/Yellow or Red Orange)
SR242 42" Four-Way, Non-Stretch Suspenders, Red w/ metal loops
Liner Systems
D9 Chambray Pure® System
Moisture barrier:
Gore RT7100 moisture barrier with Non-woven
aramid
Thermal Liner:
NOMEX®/KEVLAR® Batt quilted to Chambray
facecloth
Certified to NFPA 1971 current edition
ADDITIONAL OPTIONS AVAILABLE
Coat
FLS503 Survivor Light Holder
MT503 Mic Tab Self Fabric
MF011 D-Ring for accountability tags
RP514 Radio pocket right chest
One line letter patch w/Velcro
3” Sewn on letters
7.5 oz. NOMEX® outer shells are available in black, yellow, white, tan, blue or red
7.0 oz. Advance® outer shells are available in tan, yellow, or black
*All gear available with any outershell and liner combination
Call for your custom specification quote
8
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
LION LIBERTY™
Liberty™ Turnout Gear
Liberty™
Coat & Pant
NOMEX®
Starting at $1100
Advance®
Starting at $1175
A lightweight coat with bi-swing back for outstanding forward mobility and
high-back pants for reliable thermal protection
CLTM2K-D9 - 32” Length Coat
• D9 Chambray Pure quilted liner with breathable moisture
barrier by W.L. Gore
NOMEX®
Starting at $650
Advance®
Starting at $700
Coat Features:
• Bi-swing back
• Leather elbow, cuff and shoulder reinforcements
• Zipper with FR Velcro® 3"storm flap closure
• 4" Kevlar®/Spandex® wristlets
• 3" contoured collar
• Drag Rescue Device (DRD)
• Lion's exclusive Semper Dri™ System
• Liner Inspection System
• HP567 8.5” x 9” Bravo Hidden Handwarmer Pockets w/Velcro Closure
• 3” NYC Ventilated Scotchlite Triple Trim (Lime Yellow or Red Orange)
PLBM2K-D9 Pant
• D9 Chambray Pure quilted liner with breathable moisture
barrier by W.L. Gore
NOMEX®
Starting at $450
Advance®
Starting at $475
Pant Features:
• 7" high-back panel with traditional waist
• Leather knee reinforcements
• Leather cuff reinforcements
• Freedom® Knee
• Zipper with FR Velcro® storm fly closure
• Self-fabric take-up straps
• Lion's exclusive Semper Dri™ System
• Liner Inspection System
• FBP579 10” x 10” x 2” Kevlar lined Full Bellows Pockets
• 3” Ventilated Scotchlite Triple Trim around Cuff (Lime/Yellow or Red Orange)
SB640 H-Back Suspenders 40”
ADDITIONAL OPTIONS AVAILABLE
Coat
FLS503 Survivor Light Holder
MT503 Mic Tab Self Fabric
MF011 D-Ring for accountability tags
RP514 Radio pocket right chest
One line letter patch w/Velcro
3” Sewn on letters
7.5 oz. NOMEX® outer shells are available in black, yellow, white, tan, blue or red
7.0 oz. Advance® outer shells are available in tan, yellow, or black
*All gear available with any outershell and liner combination
Call for your custom specification quote
Bi-Swing
Back Design
High-Back
Pant Design
Certified to NFPA 1971 current edition
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
9
LION RELIANT™
Reliant™ Turnout Gear
Reliant™
Coat & Pant
PBI®Matrix
NOMEX® Advance® Natural
Starting at $1020 Starting at $1090 Starting at $1305
Freedom® Design mobility and comfort features with 3" extended coat back and low-rise
waist pants.
1CRTM-D9 - 32” Length Coat
NOMEX®
Advance®
Starting at $625 Starting at $675
PBI®Matrix Natural
Starting at $800
Coat Features:
• 4" extended back below hem
• Bi-swing back
• 3" contoured collar
• Leather elbow, cuff and shoulder reinforcements
• Hook & dee storm flap closure with snap coat closure
• 4" Kevlar®/Spandex® wristlets
• Drag Rescue Device (DRD)
• Lion's exclusive Semper Dri™ System
• Liner Inspection System
• 2”/3” Ventilated NFPA Scotchlite™ trim
* Pockets not included - please select from options below
1POLM-D9 Pant
NOMEX®
Starting at $395
Advance®
Starting at $415
PBI®Matrix Natural
Starting at $505
Pant Features:
• Low-rise waist
• Leather knee and cuff reinforcements
• Zipper with FR Velcro® storm closure
• External self-fabric take-up straps
• Lion's exclusive Semper Dri™ System
• Liner Inspection System
• 2” Ventilated NFPA Scotchlite™ trim
• Pair FBP574 8”x 8”x 2” full bellows pockets
SR143L Suspenders w/leather tabs
SB336 H-Back Suspenders 36”
Liner Systems
D9 Chambray Pure® System
Moisture barrier:
Gore RT7100 moisture barrier with Non-woven
aramid
Thermal Liner:
NOMEX®/KEVLAR® Batt quilted to Chambray
facecloth
J7 GlideTM Pure System
Moisture barrier:
CROSSTECH® moisture barrier with NOMEX® pajama
check
Thermal Liner:
NOMEX®/KEVLAR® Batt quilted to GlideTM
Certified to NFPA 1971 current edition
10
ADDITIONAL OPTIONS AVAILABLE
Coat
One line letter patch w/Velcro
RP514 Radio pocket
MT503 Mic Tab self fabric
MF011 D-Ring for accountability tags
Pr HP506 8”x 8” handwarmer pkts.
Pr FBP550 8”x 8”x 2” full bellows pkts.
FLS554 Survivor light holder
3” Sewn on letters
Upgrade to 3” Ventilated NYC triple trim
J7 Glide Pure™ liner system
Pant
Upgrade to 3” Ventilated triple trim cuff
J7 Glide Pure™ liner system
PMO542 Boot cut pants leg
7.5 oz. NOMEX® outer shells are available in black, yellow, white, tan, blue or red
7.0 oz. Advance® outer shells are available in tan, yellow or black
7.25 oz. PBI®Matrix outer shells are available in natural
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
LION V-FORCE®
V-FORCE® Turnout Gear
V-Force®
...The best technology from combat & sports clothing applied to turnout gear.
Coat & Pant
PBI®Matrix PBI®Max
FUSION™
Natural
Natural
Starting at $1685
Starting at $1925
Starting at $1965
1CVFM-K7 32” or 35” Length Coat
• K7 Glide™II Araflo® with CROSSTECH® moisture barrier by W.L. Gore
PBI®Matrix
Fusion™
Natural
Starting at $1010 Starting at $1150
PBI®Max
Natural
Starting at $1175
Coat Features:
• Self-fabric cuff & shoulder reinforcements • Polymer-coated aramid elbow
reinforcements, notched for natural flex • Zipper with FR Velcro® closure
• Ever-Dry™ Reach System with WristShield System™ • 8" over-the-hand
Nomex®/Kevlar® isodri® wristlets • 3" contoured collar • Drag Rescue Device
(DRD) • Lion's exclusive Semper Dri™ System • Liner Inspection System
• HP598 9” X 9” X 2” semi-bellows & Handwarmer Combination Pockets
• 3” Ventilated NYC Scotchlite Triple Trim (Lime Yellow or Red Orange)
1PVFM-K7 Belted Low-Rise Pant
PBI®Matrix
PBI®Max
Fusion™
Natural
Natural
Starting at $675 Starting at $775
Starting at $790
Belted Pant Features:
• 5" high-back panel with low-rise waist • Lion V-back™ suspenders (required
with these pants) • 2" Kevlar® belt with thermoplastic quick-release buckle
• Eight suspender buttons • Self-fabric cuff reinforcements standard • Polymercoated aramid knee reinforcements, notched for natural flex • Zipper fly
closure with Velcro® and snap • Lion's exclusive Semper Dri™ System • Liner
Inspection System • SBP620 9” X 8” X 2” Semi-Bellows Pockets • 3” Ventilated
Scotchlite Triple Trim around Cuff (Lime/Yellow or Red Orange)
SR842M 42” Suspenders (use only with PVFM low waist model)
Belted Low-Rise Pant
High-Back Pant
1PVHM-K7 High-Back Pant
PBI®Matrix
PBI®Max
Fusion™
Natural
Natural
Starting at $675
Starting at $780
Starting at $795
High-Back Pant Features:
• 5" high-back panel with Velcro® support pad for Lion V-Back™ suspenders
(required with these pants) • Snap tabs in front to fasten V-Back™ suspenders
• Self-fabric cuff reinforcements standard • Polymer-coated aramid knee
reinforcements, notched for natural flex • Zipper fly closure with Velcro® and
snap • External self-fabric take-up straps with postman slides front pull • Lion's
exclusive Semper Dri™ System • Liner Inspection System • SBP620 9” X 8” X
2” semi-bellows Pockets • 3” Ventilated Scotchlite Triple Trim around Cuff
(Lime/Yellow or Red Orange)
SR845 45” Suspenders (use only w/ PVHM high waist model)
7.0 oz. Fusion™ outer shells are available in black, brass, bronze or gold
7.0 oz. PBI Matrix outer shells are available in natural or black
7.0 oz. PBI Max outer shells are available in natural or black
*All gear available with any outer shell and liner
combination. Call for your custom specification quote.
ADDITIONAL OPTIONS AVAILABLE
Coat
RP 514 Radio Pocket
MT503 Mic Tab
FLS554 Survivor light holder
MF011 D-Ring for accountability tags
3” Ventilated Viz-A-V Triple Trim
One line letter patch w/ Velcro
3” sewn on lettering
Certified to NFPA 1971 current edition
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
11
LION V-FORCE® BI-SWING
V-Force® Bi-Swing
Coat & Pant
V-FORCE® BI-SWING Turnout Gear
...The best technology from combat & sports clothing applied to turnout gear.
The bi-swing back has an inverted pleat in both the outer shell and thermal
barrier. It expands as your arms move forward. There’s no tugging or binding
PBI®Matrix PBI®Max
FUSION™
Natural
Natural
Starting at $1700 Starting at $1950
Starting at $1990
at the shoulder. When your arms return to a natural position, the pleat closes
so there’s no bunching of material.
1CVBM-K7 32” or 35” Length Coat
• K7 Glide™II Araflo® with CROSSTECH® moisture barrier by W.L. Gore
PBI®Matrix
Fusion™
Natural
Starting at $1025 Starting at $1175
PBI®Max
Natural
Starting at $1200
Coat Features:
• Bi-swing back
• Self-fabric cuff, shoulder and elbow (with darts) reinforcements
• Zipper with FR Velcro® closure
• Ever-Dry™ Reach System with WristShield System™
• 8" over-the-hand Nomex®/Kevlar® isodri® wristlets
• 3" contoured collar
• Drag Rescue Device (DRD)
• Lion's exclusive Semper Dri™ System
• Liner Inspection System
• FBP683 9” X 6” X 2” Full-Bellow Kevlar Lined Pockets
• 3" Ventilated Viz-a-V™ Triple Trim Pattern (Lime/Yellow or Red Orange)
1PVFM-K7 Belted Low-Rise Pant
PBI®Matrix
Fusion™
Natural
Starting at $675 Starting at $775
Features shown on opposite page
PBI®Max
Natural
Starting at $790
SR842M 42” Suspenders (use only with PVFM low waist model)
1PVHM-K7 High-Back Pant
PBI®Matrix
Fusion™
Natural
Starting at $675
Starting at $780
Features shown on opposite page
PBI®Max
Natural
Starting at $795
SR845 45” Suspenders (use only with PVHM high waist model)
ADDITIONAL OPTIONS AVAILABLE
Coat
RP 514 Radio Pocket
MT503 Mic Tab
FLS554 Survivor light holder
MF011 D-Ring for accountability tags
One line letter patch w/ Velcro
3” sewn on lettering
Viz-a-V™ Trim Pattern
Certified to NFPA 1971 current edition
12
7.0 oz. Fusion™ outer shells are available in black, brass, bronze or gold
7.0 oz. PBI Matrix outer shells are available in natural or black
7.0 oz. PBI Max outer shells are available in natural or black
*All gear available with any outershell and liner
combination. Call for your custom specification quote.
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
LION SUPER-DELUXE™
SUPER-DELUXE™ Turnout Gear
Super-Deluxe™
Coat & Pant
PBI®Matrix
Advance®
Natural
Starting at $1275
Starting at $1510
Fully featured coat with bi-swing back for outstanding forward mobility
and low-rise waist pants for increased comfort and uniform-style fit
CSTM-D9 - 32” or 35" Length
Advance
Starting at $810
PBI® Matrix Natural
Starting at $925
Coat Features:
• Bi-swing back
• Leather elbow, cuff and shoulder reinforcements
• 3" contoured collar • Freedom® Elbow
• Zipper with FR Velcro® 3" storm flap closure
• 8" over-the-hand Nomex®/Kevlar® isodri® wristlets
• 8" over-the-hand Kevlar®/Spandex® wristlets (on non-isodri® coats)
• Drag Rescue Device (DRD)
• Lion's exclusive Semper Dri™ System
• Liner Inspection System
• HP598 9” X 9” X 2” Semi-Bellows & Handwarmer Combination Pockets
• 3” Ventilated NYC Scotchlite Triple Trim (Lime Yellow or Red Orange)
PSDM-D9 - Super-Deluxe Pant
Advance®
Starting at $465
PBI® Matrix Natural
Starting at $575
Pant Features:
• Low-rise waist
• Leather knee and cuff reinforcements
• Freedom® Knee
• Zipper pants closure with FR Velcro® storm fly closure
• External self-fabric take-up straps
• Lion's exclusive Semper Dri™ System
• Liner Inspection System
• FBP579 10” x 10” x 2” Kevlar lined Full Bellows Pockets
• 3” Ventilated Scotchlite Triple Trim around Cuff (Lime/Yellow or Red Orange)
SB336/42/48 H-Back Suspenders 36”, 42", 48"
Liner Systems
D9 Chambray Pure® System
Moisture Barrier:
Gore RT7100 moisture barrier with Non-woven
aramid
Thermal Liner:
NOMEX®/KEVLAR® Batt quilted to Chambray
facecloth
ADDITIONAL OPTIONS AVAILABLE
Coat
One line letter patch w/Velcro®
RP514 Radio pocket
MT503 Mic Tab self fabric
MF011 D-Ring for accountability tags
Pr HP506 8”x8” handwarmer pkts.
Pr FBP550 8”x8”x2” full bellows pkts.
FLS554 Survivor light holder
3” Sewn on letters
K7 Glide™II Araflo® liner system
Pant
K7 Glide™2L Araflo® E89™
Moisture Barrier:
CROSSTECH® by W.L. Gore
K7 Glide™II Araflo® liner system
PM0542 Boot cut pants leg
Thermal Liner:
Two Layers of Teflon® F-treated Nomex® E89™
7.0 oz. Advance® outer shells are available in tan, yellow or black
7.25 oz. PBI®Matrix outer shells are available in natural
Certified to NFPA 1971 current edition
*All gear available with any outershell and liner combination.
Call for your custom specification quote.
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
13
LION EXPRESS IN-STOCK TURNOUTS
Need Turnouts Now?
Get top-quality turnouts without delay!
Whether you’re upgrading your PPE, outfitting recruits, or adding personnel,
LION delivers new turnouts faster than anyone.
LION stocks three value priced, fully-featured turnouts.
Each model possesses the same high level of quality and attention to
detail that has made LION the world’s leading provider of fire fighter
protective clothing.
LION Fusion™
Coat and Pants
(See Page 15)
• LION Fusion™ Coat and Pants
Coat designed with bi-swing back for outstanding forward mobility.
Low-rise pants for superior comfort and fit. Freedom® Knee for optimum
mobility. Available in gold Fusion™. (See page 15 for details)
• LION Advance® Coat and Pants
Coat has extremely low hem rise when reaching forward or above to
provide outstanding protection at critical overlap areas. Low-rise pants
deliver superior comfort and fit. Available in tan Advance®.
(See page 16 for details)
LION Advance®
Coat and Pants
(See Page 16)
COATS SIZING CHART: UNISEX
Shaded sizes are made-to-order (75 Day Lead Time)
Chest Size
32”, 34”
36”
Sleeve Length Regular
32”
33”
34"
35”
36”
36”
Sleeve Length Long
34”
35”
36”
37”
38”
38”
PANTS SIZING CHART: UNISEX
Waist Size
Inseam
14
38”, 40” 42”, 44” 46”, 48”, 50”, 52”, 54”, 56”
58”, 60”, 62”
Shaded sizes are made-to-order (75 Day Lead Time)
28”
32”, 34”, 36”, 38”, 40”, 42”, 44”, 46”, 48”
29” (R)
50”, 52”, 56”, 58”
31” (L)
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
LION EXPRESS IN-STOCK TURNOUTS
Fusion™ Coat and Pants
Bi-swing back for outstanding forward mobility
Low-rise pants for superior comfort and fit
Built with isodri® Protective Systems
• Fusion™ outer shell of Kevlar®/Nomex®
• Glide™ 2L AraFlo® E-89™ (K7) thermal liner with
CROSSTECH® moisture barrier for optimum moisture
management and resistance to blood-borne pathogens
and common chemicals
• 8” over-the-hand isodri® wristlets shed water and dry
quickly
Fusion™ Coat
(32” length)
$880.00
CCHX-40
Available in gold fusion (CCHX-40)
• Bi-swing back for optimum forward movement
• 3” contoured collar for comfortable interface with SCBA mask
• Hidden hook and D-ring coat closure and 5” Velcro® storm flap
closure
• Semper Dri™ System in water wells and yoke reduces water
absorption to keep your working weight low
• Drag Rescue Device with soft weave Kevlar® webbing for comfort
• Black or Gold polymer-coated aramid elbow, shoulder cap, and cuff
reinforcements
• Pockets
-3.5” x 9” x 2” radio pocket on left chest
-8” x 8” x 2” semi-bellows pockets fully lined with Kevlar® twill
-Roomy 8.5” x 8.5” liner pocket
• 3M™ Ventilated Scotchlite™ Reflective Material in New York City trim
pattern (triple trim, 3” lime-yellow and silver)
Fusion™ Pants
$575.00
PCHX-40
Available in gold fusion (PCHX-40)
• Low-rise waist complements the natural contours of the body for
increased comfort. Fits and feels more like an every day pair of
trousers.
• Layer of Lite-N-Dri™ FR closed-cell cushioning at knees between
thermal liner and moisture barrier to block heat and water
• Freedom® Knee and banded crotch design for natural flexing motion
and optimum mobility
• Black or Gold polymer-coated aramid reinforcements in knees and cuffs
• Semper Dri™ System in lower legs reduces water absorption to keep
your working weight low
• Zipper fly closure with Velcro® storm fly closure
• Take-up straps (2) for custom fit
• 8” x 8” x 2” full bellows pockets on thighs fully lined with Kevlar® twill
• 3M™ Ventilated Scotchlite™ Reflective Material (triple trim, 3” lime-yellow and silver) at lower pants legs
• EZ H-Back Quick Adjust, Non-Stretch Suspenders
Coat Options:
FLS521
MF003
MF011
MT503
LP1S
LP1V
LP34
1” x 10” Flashlight Strap
Reverse Snap Hook
Dee Ring
1” x 3” Mic Tab
4” x 18” One Line Letter Sewn on Letter Patch
4” x 18” One Line Letter Patch w/ Velcro
5” x 18” One Line Hanging Letter Patch on Hem
One Line of 3” Sewn on Letters (up to 12 Letters)
*Must order a patch for all lettering*
$7.50
$4.75
$4.75
$4.75
$8.75
$21.00
$19.75
$23.50
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
15
LION EXPRESS IN-STOCK TURNOUTS
Advance® Coat and Pants
Low hem rise for outstanding protection
Low-rise pants for superior comfort and fit
Advance® Coat
(32” length)
$750.00
CCAX-70
• Advance® outer shell – 60% Kevlar®/40% Nomex®,
Available in tan (CCAX-70)
• Chambray Pure® thermal liner (D9) with Gore RT7100™ moisture
barrier
• 3” contoured collar for comfortable interface with SCBA mask
• Zipper coat closure with 3” Velcro® storm flap closure
• Semper Dri™ System in water wells, yoke, and pockets reduces
water absorption to keep your working weight low
• 8” Nomex®/Kevlar® over-the-hand wristlets
• Drag Rescue Device with soft weave Kevlar® webbing for comfort
• Elbows, shoulder caps, and cuffs reinforced with extra layer of
outer shell material
• Pockets
-3.5” x 9” x 2” radio pocket on left chest
-9” x 9” x 2” semi-bellows/handwarmer combination pockets.
-Handwarmers have Kevlar® twill backing and Semper Dri™
lining.
-Roomy 8.5” x 8.5” liner pocket
• 3M™ Ventilated Scotchlite™ Reflective Material in New York City trim
pattern (triple trim, 3” lime-yellow and silver)
Advance® Pants
$505.00
PCAX-70
• Low-rise waist complements the natural contours of the body for
increased comfort. Fits and feels more like an every day pair of
trousers
• Advance® outer shell – 60% Kevlar®/40% Nomex®
Available in tan (PCAX-70)
• Chambray Pure® thermal liner (D9) with Gore RT7100™ moisture
barrier
• Layer of Lite-N-Dri™ FR closed-cell cushioning at knees between
thermal liner and moisture barrier to block heat and water
• Knees and cuffs reinforced with extra layer of outer shell material
• Semper Dri™ System in lower legs reduces water absorption to
keep your working weight low
• Zipper fly closure with Velcro® storm fly closure
• Take-up straps (2) for custom fit
• 10” x 10” x 2” full bellows pockets on thighs lined with
Kevlar® twill.
• 3M™ Ventilated Scotchlite™ Reflective Material (triple trim, 3” limeyellow and silver) at lower pants legs
• EZ H-Back Quick Adjust, Non-Stretch Suspenders
Coat Options: (Selecting any of the following options will add 5-7 days)
FLS521
MF003
MF011
MT503
LP1S
LP1V
LP34
16
1” x 10” Flashlight Strap
Reverse Snap Hook
Dee Ring
1” x 3” Mic Tab
4” x 18” One Line Letter Sewn on Letter Patch
4” x 18” One Line Letter Patch w/ Velcro
5” x 18” One Line Hanging Letter Patch on Hem
One Line of 3” Sewn on Letters (up to 12 Letters)
*Must order a patch for all lettering*
$7.50
$4.75
$4.75
$4.75
$8.75
$21.00
$19.75
$23.50
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
MEASURING FOR TURNOUT COATS
Chest:
Have firefighter take a deep breath and measure around largest part of chest with arms at rest.
Chest sizes are available in even sizes only. If measurement is odd, round up to the next even chest size.
The average shoulder to shoulder measurement is 18” or less. If the person measured appears to have large shoulders then you
should take this measurement. If this measurement exceeds 18”, please show us this measurement as the shoulder size.
If the firefighter’s hips or waist are larger than the chest size, it is advised that you furnish this measurement.
We can furnish your gear on a female pattern. Please call us for details.
Please take into consideration the time of the year that you are taking your measurements. If additional clothing may be worn
under the coat, you may wish to consider this when taking your measurements.
The way a coat fits can be a personal choice. Some people prefer extra room in their coat. We have found that people would prefer
their coat slightly on the larger side, rather than too small.
Sleeves:
We recommend that you order “R” Regular Standard sleeve lengths. If you choose to measure sleeves it must be done
correctly. With arms straight down, put the tape measure on the neck bone and measure to the shoulder bone, then proceed to
measure down the arm to the top knuckle of the pinkie.
Sleeve length measurement should be compared to the chart below.
Based on this chart, you should be able to determine if you require “S” Short, “R” Regular of “L” Long.
Male Pattern
Chest
“S”
Size
Short
36
38
40
42
44
46-56
31”
32”
32”
33”
33”
34”
“R”
Regular
33”
34”
34”
35”
35”
36”
“L”
Long
35”
36”
36”
37”
37”
38"
Female Pattern
Chest
“S”
“R”
Size Short
Regular
36
38
40
42
44
46-48
50-56
30"
31"
31"
31"
32"
32"
33"
32"
33"
33"
33"
34"
34"
35"
“L”
Long
34"
35"
35"
35"
36"
36"
37"
MEASURING FOR TURNOUT PANTS
Waist:
Measure snug above waist or belt. Waist sizes are available in even sizes only. If measurement is odd, round up to next even
waist size. For Lumbar Support model add 1” to measurement. If belly is larger than waist, please show this measurement as
belly measurement.
For female firefighters, also measure over hips and furnish this to us as a female hip measurement. We can furnish your gear
on a female pattern. Please advise if so desired.
Inseam:
Measure from crotch to lower part of ankle bone. Inseam sizes are available in odd lengths only. If your measurement is even,
have the firefighter determine if they prefer the next odd size up or down.
Inseam lengths are marked on label of garments in letters as follows:
Male: XXS=23” XS=25” S=27” R=29” L=31” XL=33” XXL=35”
Female: XXS=21” XS=23” S=25” R=27” L=29” XL=31” XXL=33”
Please use the letter to show inseam length. For shorter or longer than above, show as odd measurement of 23”, 35”, etc.
If you order your inseam too long or too short, it will affect the whole correct fit of the pants.
REMEMBER: The most uncomfortable garments are those that are ordered too small. If your department has current Janesville
gear, it is advised that you have the firefighter try on the gear. In this case, you do not need to measure,
just advise us of size on label and date of manufacture.
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
17
RAM AIR GEAR DRYER
4-MU & 6-MU
4 & 6 - Place Bunker Gear Dryers
4-MU
Specifications
• Powder Coated Paint with 12 gauge steel
• Steel stickmen with powder coat paint for hanging fire fighter
personal protective equipment with 2″ shut off valves
• High volume and high pressure system
• Enclosed motor with noise reduction package
• 360 degree swivel casters on the base
• Removable motor and fan with 360 degree swivel casters with easy
quick connect attachment to dryer
• Motor and Fan with 4″ or 6″ hose barb attachment for drying pumper
truck
• 12 accessory drying ports with valves for gloves, helmets, balaclavas
• Operates on a 120v or optional 220v power supply
A.O. Smith Motor
• 1 HP / 60hz / volts 208-230 / amps 6.6-6.0/12.0 / Rpm 3450
• Direct coupled to fan
6-MU
• No maintenance unit
Auto Thermal Protector
• Bearing prelubricated (no further lubrication necessary)
• Insulation class B
Dayton Fan
• Wheel diameter 10 5/8″
• Wheel bore 5/8″
• Auto thermal protector
• Ball bearing
4-MU
6-MU
Electronic Timer
• Width: 28 5/8″
• Width: 30″
• Interval selection 2-4-8-12 hours
• Height: 80″
• Height: 80″
• Length: 90″
• Length: 120.5″
MSRP $8100.00
MSRP $8749.00
Please Call for Special Pricing
(Optional inline heater upgrade available, call for pricing)
HOW CLEAN AND DRY IS YOUR GEAR?
18
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
RAM AIR GEAR DRYER
4-IHT
4-Place Immersion/Hazmat
Bunker Gear Dryer
Specifications
• Powder Coated Paint with 12 gauge steel
• Steel stickmen with powder coat paint for hanging fire fighter personal
protective equipment
• Stickmen can be inverted to accommodate garments needing to be dryer
upside down, and the length is adjustable to accommodate
different sizes of suits
• High volume and high pressure system
• Enclosed motor with noise reduction package
• 360 degree swivel casters on the base
4-IHT
• Removable motor and fan with 360 degree swivel casters with easy quick
connect attachment to dryer
• Motor and Fan with 4″ or 6″ hose barb attachment for drying pumper truck
• 6 accessory drying ports with valves for gloves, helmets, balaclavas
• Operates on a 110v power supply with optional 220v power supply
A.O. Smith Motor
• 1 HP / 60hz / volts 208-230 / amps 6.6-6.0/12.0 / Rpm 3450
• Direct coupled to fan
• No maintenance unit
Auto Thermal Protector
• Bearing prelubricated (no further lubrication necessary)
• Insulation class B
4-IHT
Dayton Fan
• Width: 28″
• Wheel diameter 10 5/8″
• Height: adjustable
• Wheel bore 5/8″
• Length: 78.5″
• Auto thermal protector
• Ball bearing
MSRP $8249.00
Please Call for Special Pricing
Electronic Timer
• Interval selection 2-4-8-12 hours
HOW CLEAN AND DRY IS YOUR GEAR?
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
19
LION SUSPENDERS
Quick-Adjust H-Back, Non-Stretch, Black
For use with Reliant and Super Pants
36” Length SB336 $29.90
42” Length SB342 $29.90
48” Length SB348 $29.90
For use with Liberty Pants
40” Length SB640 $29.90
45” Length SB645 $29.90*
*Above with Metal Loops for use with suspender buttons
V-Back, Quick Adjust, Stretch-Padded
V-Back, Quick Adjust, Stretch-Padded, Red
For use with V-Force High Back Pants Only
Traditional Red Color with Black Padding
36” Length SR836 $58.50
40” Length SR840 $58.50
45” Length SR845 $58.50
For use with V-Force, Reliant or Super Pants
Traditional Red Color with Black Padding
36” Length SR836M $60.45
42” Length SR842M $60.45
48” Length SR848M $60.45
*Above with Metal Loops and rear hook
and loop fastener panel
*Above with Metal Loops for use with suspender buttons
4-Way, Non Stretch, Red
For use with Reliant and Super Pants
4-Way Night Hawk™, Non-Stretch,
Red with Silver Scotchlite™ Trim
43” Length SR143L $17.55
42” Length SR242 $22.10
48” Length SR248 $22.10
42” Length SR242T $26.00
48” Length SR248T $26.00
*Above with Leather Tabs for
use with suspender buttons
*Above with Metal Loops for
use with suspender buttons
*Above with Metal Loops for
use with suspender buttons
4-Way Full S-T-R-E-T-C-H, Red
For use with Reliant and Super Pants
20
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
LION PERSONAL RESCUE SYSTEM
et
to me
d
e
i
f
i
t
Cer
83
A 19
P
F
N
Personal Rescue System from LION
Easy To Use. Always with you. Never in the way.
The Personal Rescue System from LION integrates all escape components (50foot escape line, descender, your choice of anchor, a quick link and a tether)
and stows them in a cargo pocket on the leg of turnout pants. It can be deployed
using any Class II life safety harness or escape belt.
There are two pocket options: horizontal or vertical split cargo pocket. Each
keeps the rope from becoming entangled with the other hardware.
The Personal Rescue System is available on most LION Janesville® turnouts. It
can also be retrofit to any manufacturer’s turnout pants and works with the LION
Integrated Class II Harness, the LION Escape Belt (see below) or with any
manufacturer’s Class II harness or escape belt.
The Personal Rescue System
integrates all escape components
and stows them in a cargo pocket
on the leg of turnout pants.
LION INTEGRATED CLASS II HARNESS™ & ESCAPE BELT
LION Integrated Rescue Harness™ - Ready When You Need It
LION's Integrated Class II Harness™ features a new single-point of attachment
design for improved functionality and ergonomically positioned leg loops for
increased comfort. The harness is is built into your turnout pants so it’s always
available when you need it. The harness is located between the outer shell and
liner system. This maintains the integrity of your PPE and protects the harness.
The harness is removable for easier care and maintenance.
Made from Kevlar® with a unique design that makes it intuitive — its size
responds to the user. It tightens when loaded, yet is relaxed and doesn’t
interfere with other work situations. The LION Integrated Class II Rescue
Harness™ is designated as a NFPA 1983, Class II Life Safety Harness. It is to
be used for emergency escape with up to two-person load/capacity. It also
meets all the requirements of NFPA 1971, so the harness retains its integrity
when exposed to heat.
LION Escape Belt
The LION Escape Belt is an emergency self-rescue device that fastens at the
waist outside of your turnout pants. The belt is positioned through belt loops
on the pants and fastens with a hook and ring closure. When the escape rope
is attached to the belt, it engages in the proper position.
The escape belt is made from two-inch Kevlar® webbing and is certified to
meet NFPA 1983. It is certified for use up to 300 pounds. When the belt is
combined with a rope, descender and carabiner, it can be used as an escape
system.
*Call us today, for details and pricing!
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
21
GOLFIRE ESCAPE KITS
GOL
FIRE
'S
O
RDA
COM
BLE
PON
NFP
ENT
A
ESC
APE
KITS
!
AFF
"New" Lumbar SCBA/Belt/Harness Escape Kit
NEW-LUMKIT
by Golfire
$275.00
Black in color, the Lumbar Escape Kit holds 50’ of 8mm rope. The rope is fed through the tube that holds any of the escape hooks
and descenders on the market today. There is an opening on the top of the hook pocket for a carabineer to be pre attached to your
belt or harness. To deploy simply pull the orange tab exposing the your anchor and descender. The bag is manufactured with two
layers of material: the interior is a ballistic nylon with the exterior being a high heat ceramic/fiberglass. Your attachment points are 4
adjustable belt loops. You can specify right or left hook pocket.
Includes:
Lumbar Escape Bag, 50' 7.5mm NFPA Certified Escape Rope, NFPA Certified Crosby Hook, NFPA Certified Sterling F4 Descender,
NFPA Certified Screw Locking Carabineer
Vol Escape Kit w/ Crosby Hook
GVEK-C
by Golfire
$122.50
The VOL Escape Kit was developed as an affordable and effective escape kit for firefighters in areas with two and three story buildings. Most firefighters were taught in the
Stay Alive classes to bail out using rope, a carabiner, and gloves as a friction device.
We have taken this concept and one step further!
Includes: NFPA Certified Crosby Hook, 40' of 7.5mm NFPA escape rope, and a Pocket/
Belt bag w/ Handle. The bag fits in your pocket, belt, or SCBA Harness.
GVEK-C
The idea is that there is no waste of precious time looking for an anchor point with the
Crosby hook. Your anchor point is at the window. As taught in your Stay Alive classes,
you will wrap the rope around your body and bail out using your hands as a friction
device.
Baldwinsville Bail Out Kit
by Golfire
The idea behind the bag was to provide a low profile rope deployment system that was
easy to use and affordable. The bag sits in the bunker pants pocket with the yellow strap
hanging outside the pocket. When you run into a critical situation, reach down and pull
the bag out of the pocket. Grab the carabiner, which is laced through the snaps in the
bag, and pull it until the snaps come undone. Holding the carabiner, throw the bag out
the window. The rope will deploy until there is none left. Find a place to anchor. (Tool in
the corner - fixed object, etc...) Either use a descender and a harness to rappel or use
the method of placing the rope around the lower back using your hands as a friction
device.
Includes: Pocket/SCBA Bag, 35 or 50' 7.5mm NFPA Certified Escape Rope, NFPA
Certified Locking Anchor Carabiner, Non Locking Carabiner, Chafe Line
BBOK
Available sizes: 35', 50''
Available in Red, Yellow or Black.
22
BBOK35 35 Feet
BBOK50 50 Feet
$67.00
$78.00
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
GEMTOR HARNESSES
546NYC Gemtor Class II Fire Service Harness
Front Leg Strap Adjusters and Single Point Waist Adjustment
Includes Escape System Attachment D-Ring
546NYCL - Left Side Opening (Front Leg Strap Adjusters)
546NYCR - Right Side Opening (Front Leg Strap Adjusters)
546NYC
541NYC Gemtor Class II Fire Service Harness
This is the FDNY Personal Harness!
541NYCL - Left Side Opening
541NYCR - Right Side Opening
Features & Benefits of 546NYC & 541NYC
• Fast and Easy Donning
• Can be attached to bunker pants using loops available from most turnout gear manufacturers.
• Color coded design for easy donning
• Fixed length front, Handle always the same length regardless of
adjustment.
• 3-Stage locking Pompier hook with 2” side opening gate available in
Aluminum (NFPA General Use Carabiner classified by UL)
• Extremely lightweight, weighs only 2.8 lbs! (Aluminum hook).
• Forged alloy steel escape system attachment D-ring.
• Sturdy, lightweight nylon webbing 1 ¾” wide stitched with high
tenacity nylon thread.
• Easy waist belt operation, just engage steel snaphook and D-ring.
• Available with right side or left side (FDNY style) opening
• Unique design lowers the body’s center of gravity and helps reduce
the possibility of toppling.
• Can be attached to bunker pants.
• Pompier hook stores at center front position.
$225.00 (Regular Fits 36"-50")
$232.00 (Small Fits 30"-44")
$232.00 (XL Fits 44"-56")
UL Classified to NFPA 1983-2012 edition
541NYC
UL Classified to NFPA 1983-2012 edition
544FR Gemtor Class II Kevlar Fire Service Harness
Flame Resistant, Includes Escape System Attachment D-Ring
544FR
544FR - Class II Harness, Kevlar, Right side opening
• Can be worn externally with loops on outside of bunker pants.
• Can be used with an Escape System (includes escape system sliding
D-ring) Made of 1 3⁄4" wide Kevlar webbing and stitched with high
strength Kevlar thread.
• Double layer A-frame and heavy-duty hardware for extreme durability.
• Simple waist connection.
• Adjustable leg straps.
• Standard right side opening. Available with left side opening.
$231.00
Note: Harnesses are adjustable within a range but are individually
sized. Specify your bunker pant waist size when ordering for internal
use. When ordering for external use, provide the measurement of the
waistband over the outside of the bunker pants.
UL Classified to NFPA 1983-2012 edition
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
23
LION STRUCTURAL GLOVES
LPG927BL
Commander Blue
Gauntlet
LPG925
Rebel Black Gauntlet
LPG827BG
Defender Gauntlet
LPG927BG
Commander Black/Gold
Gauntlet
NFPA 1971
Gloves available
sizes XXS thru 4XL.
LPG827G
Patriot Gauntlet
LION's NEW Rebel
LPG925
Rebel, Kevlar® knit w/ leather palm. CROSSTECH® insert and Kovenex® liner. Gauntlet cuff.
$100.00
LION Commander
Extreme Dexterity for Extreme Firefighting
LPG926BG
Commander Black/Gold, premium split leather w/ Kevlar® knit wristlet. CROSSTECH® Direct Grip® insert.
$76.50
LPG927BG
Commander Black/Gold, with gauntlet cuff.
$73.50
LPG926BL
Commander Blue, premium split leather w/ Kevlar® knit wristlet. CROSSTECH® Direct Grip® insert.
$76.50
LPG927BL
Commander Blue, with gauntlet cuff.
$73.50
LION Defender
Traditional Three-Layer Structural Firefighting Glove
LPG826BG
Defender Black/Gold, premium split leather w/ Kevlar® knit wristlet. CROSSTECH® glove insert.
$62.50
LPG827BG
Defender Black/Gold, with gauntlet cuff.
$58.50
LION Patriot
Three Layers for Increased Safety, Comfort and Durability
LPG826G
Patriot, premium tan split leather w/ Kevlar® knit wristlet. CROSSTECH® glove insert. Fleece liner.
$62.50
LPG827G
Patriot, with gauntlet cuff.
$58.50
24
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
LION SPECIALTY GLOVES
LPGMXXT
Xtreme
LPG1977
Ranger
LPGMX90
Cold Weather Work
WILDLANDS FIRE FIGHTING GLOVES
LION Ranger - Lightweight and Water Resistant Single-Layer Gloves, NFPA 1977
Ranger, black and gold split leather glove with wristlet cuff.
LPG1977
$30.50
Sizes XS-2XL
EXTRICATION GLOVES
LION Xtreme - Extrication Gloves, Non-NFPA
LPGMXXT
Xtreme, extrication and technical rescue glove with “Hi-Vis” padded knuckles and Armortex® palm pads.
$31.50
Sizes S-2XL
LION Mechflex Mechanic's Specialty Gloves, Non-NFPA
LPGMX90
Cold Weather Work Glove, “Hi-Vis” lime back, black pig palm. Waterproof.
$20.00
Sizes S-2XL
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
25
GLOVES & ACCESSORIES
Super Glove
$110.00
• True 3-D Hand Shaped Styling with Staggered Layer Seaming makes
hand movement less opposed and less stressful.
• Bubble-Flex and Flex-Tuck construction with dead air spacer ridges allow
natural hand flexing and increases effective insulation. Since the glove is not
normally pulled tight to the skin...an insulating “blanket” of air is always retained.
• Black Digiroo™ Digital Kangaroo on palms and fingers for incredible
durability, grip and tactility with unprecedented thinness.
• Eversoft black cowhide cuffs, front and back.
• Top grain kangaroo leather on glove back for easy flex and exceptional
durability.
• Air Spacer™ Thermal Lining architecture traps air for thermal protection
without traditional bulk.
• Crosstech® Moisture Barrier
• NFPA 1971
• Regular sizes: XXS, XS, S, M, L, XL, 2XL
Cadet sizes: S, M, L, XL, 2XL
7500
Fire-End Gold Thermo Leather Glove with modacrylic lining,
breathable liquid barrier and Nomex Knitwrist. NFPA 1971
$48.00
7550
Fire-End Gold Thermo Leather Glove with modacrylic lining,
breathable liquid barrier and Gauntlet cuff. NFPA 1971
$47.00
Above gloves are available sizes XS thru XXL.
Please specify sizes required when placing your order.
Glove Keeper II
• Wraps around any size gloves
• The male/female connector clips together with ease and is then cinched tight
with the D-Ring
• To release, simply pinch the connector!
• The D-Ring can be further used to hang other objects
• Available in Yellow or Black
GK2
26
1-23
24+
$3.99
$3.25
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
RINGERS GLOVES
Extrication Hybrid Gloves - Hi Vis
Ringers Model 337
• ResQLoc Grip System
• Supercuff Technology for Full Range of Motion
• CE Certified Puncture and Cut Protection
• TPR Impact Protection on Top of Hand and Full Length of Fingers
• High Visibility for Increased Safety
• Sizes S-2XL
1-11
$45.00
12+
$43.35
Long & Short Cuff Extrication Gloves - Yellow
Ringers Model 304 - Long Cuff
Ringers Model 314 - Short Cuff
•
•
•
•
•
•
•
•
•
Tough Armortex® reinforced index finger and thumb
Tough Armortex® puncture resistant
Tough Armortex® abrasion resistant
Premium Synthetic Leather palm and finger material
Elastic long cuff keeps out cut glass
Reflective Schoeller® padded knuckle
Anatomically designed palm pads
Non-reflective Armortex® knuckle
Sizes S-2XL
304 - Long Cuff
1-11
12+
$36.95
$35.10
314 - Short Cuff
1-11
12+
$32.95
$31.30
Barrier 1 Extrication Gloves - Hi Vis Green
Ringers Model 327
• Waterproof and breathable Hipora® barrier to protect hands from
micro-organisms such as TB, Hepatitis, Staph and HIV meets O.S.H.A.
Bloodborne Pathogens Standards (29CFR 1910.1030)
• Boxed finger tip design for better fit and comfort
• Elastic cuff and gaitor to keep out glass and debris
• Kevlar® stitching in high wear areas
• Molded TPR (Thermal Plastic Rubber) knuckle reduces impact,
increases dexterity and features 3M™ Reflective fabric
• Molded TPR finger knuckle and finger tip panels
• Cut resistant Kevlar® palm and thumb panels, side panels and finger panels
• Non-reflective Armortex® knuckle
• Sizes S-2XL
1-11
$47.95
12+
$45.55
*We carry a full line of Ringers Gloves
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
27
HOODS
HOOD-BC
HOOD-PBI
HOOD-NOM
Majestic's PAC II Hoods offer more square inches of protection and is their most popular NFPA approved hood style. The notched
shoulder and longer length allows for a proper fit and added protection across the chest. The longer length (3 inches longer than NFPA
requires) assures that this hood will stay tucked inside other required equipment.
CERTIFICATION: NFPA 1971, UL Certified. Meets or exceeds Cal/OSHA Standards.
Nomex Blend Double layer hood and bib
PBI Double layer hood and bib
Ultra C6 Carbon Blend Double layer hood and bib
HOOD-NOM
HOOD-PBI
HOOD-BC
$20.00
$27.50
$32.50
SPECIALTY HOODS
HOOD-FLAG
HOOD-CAMO
HOOD-PINK
HOOD-TIEDYE
Specialty Hoods
Majestic’s Specialty hoods feature their Industry Favorite Pac II style hood with colors to express your personal style!
CERTIFICATION: UL Certified to be compliant with NFPA 1971 current edition. Meets or exceeds Cal/OSHA Standards.
HOOD-FLAG
HOOD-CAMO
HOOD-PINK
HOOD-TIEDYE
$34.50
$34.50
$34.50
$34.50
*Many other styles/colors available
28
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
GEAR BAGS
007 The Ultimate Gear Bag
•
•
•
•
•
•
•
ER
LOW
NEW ES!
PRIC
Huge 4.5 cubic ft. of interior storage
Four outside pockets
Firefighter’s Maltese Cross emblem
Lime Hi-Viz Reflective Trim
Metal Zippers, Buckles and Strap Loops
Back panel opens to reveal a mesh vent window
Includes Shoulder Strap
$27.50
007-WH The Ultimate Gear Bag with WHEELS
•
•
•
•
•
•
•
•
•
Durable Wheels with Reinforced "Skid Pads"
Huge 4.5 cubic ft. of interior storage
Back panel opens to reveal a mesh vent window
Reflective trim along straps
Firefighter’s Maltese Cross emblem
600 Denier
Main Compartment: 18” x 17” x 16”
Overall Dimensions: 29” x 17” x 16”
Includes Shoulder Strap
$57.95
911-84681 Step-In Gear Bag
• Keeps your turnout gear ready to go.
• Heavy duty carry straps for easy transport.
Outside: 19.5"H x 15.5"W x 17"D
$19.95
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
29
LION HELMETS
LION Helmets
...Customized Fit -Optimum Comfort
These helmets are engineered from the
firefighter’s perspective. They combine the
time-honored traditions of the fire service with the
latest technical advancements in materials, design,
and manufacturing. The result is a
helmet that is light and comfortable, but provides
optimum heat and impact resistance.
America’s bravest deserve the best!
That’s what you get with a LION helmet.
From the traditional-style American Classic and
Heritage, to the sleek modern-style Legacy Series,
to the Liberator rescue helmet, all the
manufacturing details that are essential in
delivering the performance necessary are taken
into account with high priority.
As a result, every LION helmet model offers
optimum comfort, fit and safety.
CUSTOM COLORS AVAILABLE!
Lion Front
$27.26
LFH3910A Legacy 5
(Modern Style)
$185.60
(w/ American Classic/Heritage)
We are introducing a new patent
leather front shield for our LION
American Heritage and American
Classic helmets. Available with two
or three panels. Not available with
insignias, medallions or any other
decorations. Please download an order
form from our website or call to have
one emailed.
LION Legacy 5 with 4” face shield.
Features a fiberglass shell, 3M
Scotchlite lime yellow, ratcheting head
band cushioned with foam, quick release
release chin strap with postman’s slide,
Center of Gravity adjustment system
and an impact cap. Features the SpringLoaded Safety-Set Bracket/WaterGuard
Seal.
LFH3910S
$203.00
with ESS goggles
*Pricing shown is NY State Contract pricing,
please contact us for Non-NY state pricing.
LFH4120E American Heritage
(Traditional Leather)
LFH2120E American Classic
(Traditional Fiberglass)
Liberator
Rescue Helmet
$481.40
$236.64
LION American Heritage in
rich leather with a 4” faceshield. A unique
Leather Glass process which molds fiberglass composite between the outer and
inner layers of the leather shell. Features
3M Scotchlite lime yellow, ratcheting
headband cushioned with foam and
covered with sleeve leather, quick release
chin strap with postman’s slide. Features
Center of Gravity adjustment System.
LION American Classic in
fiberglass w/ a 4” faceshield. A Thermax
composite to ensure thermal protection,
lightweight and structural integrity.
Features 3M Scotchlite lime yellow,
ratcheting headband cushioned with foam
and covered with black knit, quick release
chin strap with postman’s slide.
Features Center of Gravity adjustment
System.
LFH4120S $516.20
with ESS goggles
LFH2120S $247.66
with ESS goggles
with ESS goggles
$190.82
LFH5100H (non-NFPA)
$150.80
LFH4120D $555.64
with ESS goggles and flip downs
LFH2120D $277.82
with ESS goggles and flip downs
without eye protection or ear cover.
LFH4120F $493.00
with flip downs only (Non-NFPA)
LFH2120F $233.16
with flip downs only (Non-NFPA)
LION Liberator Rescue Helmet
with fiberglass shell. A comfortable,
lightweight, and durable helmet designed
for search and rescue.
Features 3M Scotchlite lime yellow,
ratcheting headband cushioned with foam
and covered with black knit, quick release
chin strap with postman’s slide. Features
Center of Gravity adjustment System,
LFH5100S
30
*Helmets on this page are shown with optional leather fronts.
*Most helmets are available in your choice of Yellow, Black,
White, Red, Blue, Green, or Orange. All Green and Orange
helmets have longer lead times and are an additional $10.00.
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
GOLFIRE SHIELDS
Golfire Shields are made from three layers of 100% Leather.
Panels are made from engineered grade vinyl for long life!
!
NEW
Each shield is hot glued and stitched to last a lifetime!
All shields include metal backer bars!
Many custom designs options and styles are available!
GF4SHIELD - 4" Leather Front - $27.50
GF6SHIELD - 6" Leather Front - $31.50
Standard Leather Colors are Red, Black or White - Other Colors available - Add $2.50
Additional Options:
Decal - Add $2.50
Medallion - Add $18.00
Passport - Add $4.50
Flag - Add $7.50
Patent Leather - Add $5.00
Reflective - Add $2.50
Colored #'s - Add $2.50
*To order shields, please fill out our GOLFIRE Leather Shield forms found on our website*
PAUL CONWAY FRONTS
Paul Conway Shields are meant to last. The printing is hot-stamped in colors or foil. Every
letter is seared into the surface of the leather, like a brand. There may be easier or faster ways
of doing it. But we wouldn’t put our name on them—or yours.
Precision die-cutting produces the clean, sharp edge of a Paul Conway Shield. After about
1,000 cuts, our dies are replaced—long before they lose their edge. The result is a uniform
regularity from shield to shield, though the individual graining of the leather gives each a
distinctive quality.
There is an authenticity to a Paul Conway Shield. Their 6” Shields, for instance, are true to
tradition in their hand-selected hides. The all-leather construction needs no stiffener. Their
meticulous detailing. But it goes beyond what you can see to what you can feel. To hold a Paul
Conway Shield is to know that the hands which crafted it have also battled flame and smoke.
Where everything must be genuine.
A firefighter takes nothing for granted. Not his equipment. Not his information. Not even
himself. That’s why training and testing never end. Paul Conway Shields must also pass
inspection at every stage. Our 4” model features a Velcro® backing that is rated at 20 pounds
per square inch and has been endurance-tested for 1,000 pulls. It is designed for Phoenix
Technology and newer style helmets, but still made the traditional hand-crafted way.
Standard 4” or 6” Leather Front
$47.00
Additional Center Options:
Decal - Add $5.00
Metal Disc - Add $5.50
Brass or Silver Ornament - Add $18.00
*To order shields, please fill out our PAUL CONWAY Leather Front forms found on our website*
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
31
HELMET LIGHTS
Foxfury Command 20 Fire Helmet Light
Compact white LED firefighter helmet light offering focused and panoramic lighting.
Light used in structual firefighting, wildland firefighting, USAR (search and rescue), EMS.
Foxfury Command 20
•
•
•
•
•
•
•
•
•
•
•
•
3 modes: High: 72 torch lumens/8 hours, Medium: 52 torch lumen/12 hours, Low: 31 torch lumen/16 hours
See up to 120 ft (37 m) away and 48 ft (15 m) wide
Fits 99% of US (American) style fire helmets
20 LEDs: 18 white and 2 green - white and green LEDs enhances depth perception and color rendition
Rear safety LED (red) for enhanced visibility
Easily accessible tap switch (even with thick gloves)
Fire resistant - meets NFPA 1971-2007 fire resistant requirements: 500°F (260°C) for 30 minutes
Waterproof to 20 ft (6 m)
Impact resistant
Made of premium materials for extra durability and longer life
4 AA batteries (Fire & Fire Tilt)
Rechargeable AA battery system with charger (Rechargeable Fire)
420-006
Fire
$89.99
420-006T Fire Tilt
$93.99
420-006R Rechargeable Fire
$144.99
*MAP pricing is shown - call for special pricing
Light Shield Products - Level Lights
Light Shield TB100
The Level Light system is a pair of multi-purpose lights designed for almost any use. Each 160 Lumen light has three
light settings, high, low, and a fast paced strobe with a glove-friendly on/off switch. These non-static lights are also both
dustproof and waterproof. Unique ratcheting system allows for user-friendly adjustments to customize the direction of the
two lights independent of one another. The system also has two half inch carabiner mounts on each light that allow you to
attach them to yourself, ropes, tools, etc. and you have one to share with another as your situation warrants.
• Flexible / impact resistant - successfully withstands drops from a height of 21 feet
• Brackets heat tested @ 500° F for 2 hours
TB100
• Two 160 lumen light set combined total = 320 lumens
• Powered by three Duracell AAA batteries (included)
• 4.5 hour+ burn time
• Leveling system can fit up to half inch carabiner
NT100
TB100
NT100
Traditional Bracketing System
Non-Traditional Bracketing System
$74.50
$74.50
Light Shield NT100
Streamlight Vantage™ LED... Helmet-Mounted Tactical Light!
HELMET-MOUNTED TACTICAL LIGHT The solution to firemen’s hands-free lighting needs.
Compact, powerful, shock-proof, and virtually indestructible!
Streamlight Vantage™ LED
• Lightweight, compact, low profile design easily attaches/detaches above or below brim on fire helmets,
industrial helmets and hard hats
• C4® LED delivers 7,000 candela peak beam intensity; 115 lumens; 167 meter beam distance
• Run 6 hours to the 10% output level
• Features an ultra-bright blue taillight LED
• Fits both traditional and modern style helmets
• Tighten clamp with your fingers. No tools necessary!
• Swivel clamp and insertable 5° angle adjuster to optimize beam location
• Rotates 360 degrees on clamp
• IPX7 waterproof to 1 meter for 30 minutes
• Uses two 3V CR123A lithium batteries (included)
69140 Black $109.00
32
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
HELMET ACCESSORIES
Reflective Helmet Crescents
These helmet crescents feature Black imprint on White reflective material.
11-106
11-109
11-111
11-113
11-117
11-120
$2.50
ASST. CHIEF
BATTALION CHIEF
CAPTAIN
CHIEF
COMMISSIONER
DEPUTY CHIEF
11-133
11-138
11-141
11-148
11-162
11-166
FIREFIGHTER
FIRE POLICE
1ST ASST. CHIEF
LIEUTENANT
2ND ASST. CHIEF
3RD ASST. CHIEF
each
Other titles available
Reflective Helmet Decals
These helmet decals are 3” and feature Red imprint on White reflective material.
The bottom line is imprinted FIRE DEPT., except for 07-118 which has no bottom
imprint. Top line as shown below.
07-101
07-104
07-105
07-108
$2.50
ASST. CHIEF
BATTALION CHIEF
CAPTAIN
CHIEF
07-110
07-118
07-122
07-128
DEPUTY CHIEF
FIREFIGHTER
FIRE POLICE
LIEUTENANT
each
CUSTOM DIE CUT DECALS
These decals were designed especially for fire helmets. Their special die cut design allows them to easily adhere to the shape
of the front of helmets. They are made of reflective material with the adhesive on the back.
*When ordering please specify: Model number, color of imprint, top line wording and bottom line wording.
*Price includes one color imprint, add 25% for each additional color.
Note: These are custom made deals and are absolutely not subject to cancellation or return.
#FPD-4275 - Size 4” Wide
#FRT-3547 - Size 4” Wide
(not shown actual size)
(not shown actual size)
Qty
Price ea.
10
$10.00
26
$5.50
51
$3.95
Qty
Price ea.
10
$10.00
26
$5.50
51
$3.95
Minimum order 10 pieces
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
33
GOGGLES & EYE PROTECTION
ESS Innerzone One Goggles
ESS Innerzone Two Goggles
ESS Innerzone Three Goggles
The Innerzone 1 goggle is designed
to be worn without a face shield.
The Innerzone 1 features a unique twopiece strap and mounting brackets.
The goggles can be stowed on the front
or rear of the helmet.
They also feature a quick adjustment
headband, antifog inner surface, and
a Hardcoated polycarbonate lens.
Innerzone 1 goggles are NFPA compliant
The Innerzone 2 goggle is designed
to be worn with or without a face
shield. The Innerzone 2 features
snap-on/snap-off brackets which allow
storage of the goggles in your pocket or
the back of the helmet. They also feature
a quick adjustment headband, antifog inner
surface, and a Hardcoated polycarbonate
lens.
Innerzone 2 goggles are NFPA compliant.
You can retrofit these to your
existing helmet in minutes.
You can retrofit these to your
existing helmet in minutes.
The Innerzone 3 goggle is designed
to be worn without a face shield.
The Innerzone 3 features a traditional
wraparound strap system. The strap
attaches to rear of helmet with two
adhesive backed Velcro tabs. The
Innerzone 3 can also be worn with
brimless helmets. They also feature a
quick adjustment headband, antifog inner
surface, and a Hardcoated polycarbonate
lens.
Innerzone 3 goggles are NFPA compliant.
ESS-01-GY1-WF
**CALL
ESS-01-GY2-WF
**CALL
ESS X-Tricator Goggles
ESS ICE2X Eyeshield System
The X-Tricator goggle is designed
to be worn with a face shield helmet.
The X-Tricator features snap-on/snap-off
brackets which allow storage of the
goggles in your pocket or the back of the
helmet. They also feature a quick
adjustment headband, antifog inner
surface, and a Hardcoated
polycarbonate lens.
The ESS ICE2X delivers high performance
function and style for EMS/EMT, Technical”
Rescue, Wildland, Vehicle Extrication, and ESS IC
other procedures where primary eye
protection is a necessity.
You can retrofit these to your
existing helmet in minutes.
ESS-01CB-EX
ESS-01-GY3-WF
**CALL
*Includes two complete sets of spectacles
with 2.4mm lenses (Clear & Smoke Gray),
zippered protective hard carrying case, no
fog cloth, & leash
ESSICE-2XR
**CALL
**CALL
ANSI Z87.1 and OSHA compliant
** CALL US FOR PRICING **
ESS Clear Tear Offs - 6 Pack
(Protects Goggle Lens)
They are thin, optically clear, and reusable
films that stack on the outside of the goggle
lens and are removed one at a time.
ET6PK
34
We are not permitted to show pricing below the manufacturer’s
MAP prices, so call us for costs not shown on this page
$6.50
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
LEATHER STRUCTURAL FIRE BOOTS
KOC O
T
S
T
*IN DY
A
E
R P!
I
SH
502-004 Fire Hunter USA
• Leg Height: 11”
• Steel Protective Toe Cap & Exterior
• Profiled Rubber Toe Cap
• Steel Puncture Protection Sole
•
•
•
•
CROSSTECH Moisture Barrier
Increased Chemical Protection
Heat Resistant Nitrile/Rubber Sole
NFPA 1971 & 1992
Men 5-16, Whole and half sizes
Women 5-12, Whole and half sizes
Narrow, Medium, and Wide Widths
KOC O
T
S
T
*IN DY
A
E
R P!
I
SH
507-101 Fire Hero Xtreme
501-605 Fire Hunter Xtreme
• Leg Height: 14”
• Ankle Flex System, Heel Bend
• Profiled Rubber Toe Cap
• Shin & Ankle Protection
• CROSSTECH Moisture Barrier
• Wide slip-in strip
• Steel toe cap and reinforced sole
• NFPA 1971 & 1992
Men 5-16, Whole and half sizes
Women 5-12, Whole and half sizes
Narrow, Medium, and Wide Widths
$332.00
$265.00
KOC O
T
S
T
*IN DY
A
E
R P!
I
SH
6+ $324.00
6+ $257.00
(*NY State Contract Pricing Available on boots shown above)
• Leg Height: 11”
• Ankle Flex System, Heel Bend
• Profiled Rubber Toe Cap
• Shin & Ankle Protection
• CROSSTECH Moisture Barrier
• Wide slip-in strip
• Built-in Boot Jack
• Shorter height for wider calves
• Protective toe cap & reinforced sole
• NFPA 1971 & 1992
Men 5-16, Whole and half sizes
Women 5-12, Whole and half sizes
*Shipped as both Medium & Wide Width,
using insoles (Narrow also available)
$347.00
6+ $339.00
ad
Qu fied
rti
Ce
277-0912 The X2 Boot
• Leg Height: 14”
• FireTuffTM Leather Upper - Fireproof
• FusionTM Upper -solution dye of Nomex®/Kevlar® and Teflon®
• Exclusive 3-Point Heel Lock for Fit & Comfort
• CROSSTECHTM Fabric with Omaha lining
• Kevlar® lined for maximum protection
• Comfort form-fitting shin-guard
• Rubber Toe Cap for high abrasion
• Stainless Steel Toe, Midsole, & Shank
• Tri-Density, Multi-fit, Removable Footbed
• Integrated & Reinforced Loop Pull-On System
• Calf-Fit System for Maximum Comfort & Fit
*All Sizes Fit 3 Widths - Medium, Wide, & Extra-Wide
Whole 6-15, Half 8 1/2 - 11 1/2
*Call for Black Diamond Boot pricing Our price is below the manufacturer's advertised pricing
506-005 Fire Flash Xtreme
• Leg Height: 10”
• Profiled Rubber Toe Cap
• New T-Grip Zipper & Lacing System
• CROSSTECH Moisture Barrier
• Nomex Shoelaces
• Kevlar Cut Protection Material in Inner Liner
• Steel Toe Cap and Reinforced Sole
• For Structural & Wildland Fire Fighting,
USAR, and Hazmat
* NFPA 1971, 1977, 1951, 1992
Men 5-16, Whole and half sizes
Women 5-12, Whole and half sizes
Narrow, Medium, and Wide Widths
$372.00
6+ $358.00
(*NY State Contract Pricing Available)
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
35
SPECIALTY BOOTS
ad
Qu fied!
rti
Ce
505-204 Special Fighter USAR
• Leg Height: 10”
• CROSSTECH Moisture Barrier
• Waterproof, Bloodborne & Chemical Resistant
• HAIX FL Fit System - Patented Two Zone Lacing
System for quick & optimal lacing adjustment and fit
• Steel Protective Toe Cap
• High Voltage Resistant & Reinforced Rubber Sole
• Waterproof Leather, Hydrophobic, and Breathable
• For Confined Space & Technical Rescue Applications
* NFPA 1977, 1951, 1999, 1992
Men 5-16, Whole and half sizes
Women 5-12, Whole and half sizes
Narrow, Medium, and Wide Widths
$336.00
6+ $328.00
605-113 Airpower® XR1
• Leg Height: 9”
• CROSSTECH Moisture Barrier
• Waterproof, Bloodborne & Chemical Resistant
• Metal-Free Lighter Weight / Non-Metalic Puncture Plate
• All Leather, Water Resistant Upper
• High Heat Resistant & Slip Resistant Rubber Sole
• Protective, Composite Toe Cap
• For EMS & Wildland Firefighting
* NFPA 1977 & 1999
Men 5-15, Whole and half sizes
Women 5-10, Whole and half sizes
Narrow, Medium, and Wide Widths
$245.00
6+ $236.00
(*NY State Contract Pricing Available on boots shown above)
KOC O
T
S YT
IN
AD
E
R P!
I
SH
36
605-111 Airpower® R1 Boot
Station/Ems Boot
• Leg Height: 8”
• HAIX® Secura Liner
• CROSSTECH Moisture Barrier
• HAIX® Sun Reflect Leather
• HAIX® Climate System
• Protective Toe Cap & Additional TPU Toe Cap
• Puncture Protection Sole
• Extremely Slip Resistant, Heat Resistant Sole
• NFPA 1999
605-109 Airpower® R2 Boot
Station/Ems Boot
• Leg Height: 8”
• HAIX® Secura Liner
• CROSSTECH Moisture Barrier
• HAIX® Sun Reflect Leather
• HAIX® Climate System
• Protective Toe Cap
• Puncture Protection Sole
• Extremely Slip Resistant, Heat Resistant Sole
• NFPA 1999
Men 4-15, Whole and half sizes
Women 5-10, Whole and half sizes
Narrow, Medium, and Wide Widths
$226.00
6+ $218.00
(*NY State Contract Pricing Available)
Men 4-15, Whole and half sizes
Women 5-10, Whole and half sizes
Narrow, Medium, and Wide Widths
$233.00
6+ $225.00
(*NY State Contract Pricing Available)
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
RUBBER BOOTS
690-9451 BLACK DIAMOND
MEN’S 15” Comfort Fit Bunker
9203 BLACK DIAMOND
Non NFPA Compliant 31" Felt Lined,
Insulated Rubber Boot
• Foam insulation
• KEVLAR/NOMEX leg lining
• Tibia Guard
• Black K-Lug outsole
• Steel toe and midsole
• Meets NFPA 1971
• Comfort Fit -order same as shoe size
Whole sizes only 7-15
Medium width only
* Medium or Wide
Whole sizes 4-15, Half sizes 8 1/2-11 1/2
*Call for Black Diamond Boot pricing Our price is below the manufacturer's
advertised pricing
*Call for Black Diamond Boot pricing Our price is below the manufacturer's
advertised pricing
BOOT ACCESSORIES
Shoe Polish specially developed for HAIX® Sun Reflect leather - caring
and impregnating shoes made of smooth leather. Gives the leather a
new shine, and additional waterproof protection while maintaining
breathability.
900060 - Haix® Black Shoe Polish - Tube
$10.00
900160 - Haix® Black Shoe Polish - Bucket
$150.00
Remove your HAIX® boots without having to bend down.
Made of solid wood and branded with the HAIX® logo.
904000 - Haix® Boot Jack
$19.50
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
37
BOSTON LEATHER
Fireman's Radio Strap
6543
$28.50
6543R $31.50 (Reflective)
• 1 1/4" wide heavy duty leather
• Leather mic loop • Positive locking buckle
• Mates to a radio holder (sold separately) with rust free scissor snaps
6543
Fireman's Radio Holder w/ D-Rings & Elastic Strap
6543R
5481RC-E
5481RC-E
$29.50
• The same as radio holder style 5481, with D-rings and elastic strap.
• Full leather case Adjustable, Hook and Loop lined top strap.
• Uses D-rings to mate with firefighter's radio strap.
• Holds Motorola HT90, MTX 900
Measurements:
• Interior Width : 2.9" • Interior Depth (Front to Back) : 1.4"
• Front Height : 4" • Back Height : 6"
Fireman's Anti-Sway Strap
5425
$8.00
5425R $8.50 (Reflective)
• Clips to the radio strap & your turnout gear to keep your radio close
• Heavy duty leather
5425
Fireman's Leather Suspenders
9175
$49.50
• Standard Firefighter Suspenders, button loop
• 1 1/2" Wide Adjustable Straps
• Roller Buckles
5425R
9175
*We carry a full line of Boston Leather Items
SMITH & WARREN
We carry a full line of
Smith & Warren Badges
38
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
LION TACTIX® TR51™
Tactix® TR51™
Coat & Pant
Nomex
Starting at $815
Millenia
LION TACTIX TR51 Rescue Coat and Pants
A versatile, dual certified technical rescue outfit - comfortable and
lightweight. Ideal for EMS or Urban Search & Rescue... Meets BOTH standards.
Available in your choice of 6 oz. Nomex or 5.3 oz. Millenia.
Starting at $995
CSRM
29” or 32” Length
Nomex
Starting at $480
Millenia
Starting at $560
Coat Features:
• 3” NFPA Scotchlite Ventilated Triple Trim (LY or RO)
• Bi-swing back and underarm bellows
• Self-fabric elbow reinforcements
• Zip front closure with internal storm flap and water channel
• Removable CROSSTECH® S/R moisture barrier liner
* Pockets not included - please select from options below
PSRM
TR51 Pant
Nomex
Starting at $335
Millenia
Starting at $435
Pant Features:
• 3” NFPA Scotchlite Ventilated Triple Trim (LY or RO) cuff trim
• Self-fabric knee reinforcements
• Pants cuffs have self-fabric reinforcements and self-fabric
Velcro® and dee ring adjusters
• Velcro® storm fly closure with snap
• Postman-style take-up straps at waist
• Reinforced seat
• Removable CROSSTECH® S/R moisture barrier liner
* Pockets not included - please select from options below
ADDITIONAL OPTIONS AVAILABLE
Coat
RP553 Radio/Flashlight Pocket
HP597 Pr. 9” x 7” x 2” combination pkts
MT503 Mic Tab Self Fabric
FLS556 Flashlight Hook
HD001 Hide-away Hood with pull string
MP713 3.5” x 5.5” Patch Pocket
MP546 5” x 6” Patch Pocket
SF224 External 2.5” Storm Flap
LP1/LPV2 One line letter Patch w/ velcro
3” Sewn on letters
FSRM/F Nomex Fleece Winter Liner (CC714 & FF225)
Pant
FBP574 Pr. 8” x 8” x 2” Full Bellows Pkt
BHS013 2” KEVLAR belt
PMO206 2 Layer Padded Knee
PMO209 4 Layer Padded Knee
PMO1/PLW222/PC515 18” Zipper Leg
Available in the following sizes:
6.0 oz. Nomex Available in black, navy, royal blue, red or yellow
5.3 oz. Millenia Only Available in natural color
Coat Chest
36” - 56” (even sizes only)
Pant Waist
30” - 56” (even sizes only)
Inseam
XS (26”), S (28”), M (30”), L (32”) or XL (34”)
*Certified to NFPA 1951 and NFPA 1999
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
39
RESCUEWEAR
11SL - Gerber Response 3 in 1 Parka
starting at $406.25
This parka has it all.
NFPA 1999 Certified for protection against blood born viruses,such
as hepatitis and HIV, as well as being ANSI 107 Class 3 compliant
for the highest level of visibility.
This garment is the ultimate in safety for the First Responders in any
situation. Hip/length waterproof/breathable EMS jacket that meets
the NFPA 1999, and Class III of ANSI 107:2004. Outer shell fabric
high visibility fluorescent material. Two-tone design; lime/yellow with
midnight navy accents.
•
•
•
•
•
•
•
•
•
•
High Visibility Fluorescent outer shell
Certified all-weather waterproof / breathable barrier
NFPA 1999 certified to stop blood borne pathogens
ANSI 107:2004 Class III compliant
3m Scotchlite reflective trim
Microphone tabs on both shoulders
Radio pocket on the right hand chest
Patch pocket on the left hand chest
Two large lower cargo pockets with fleece lined hand warmers
Adjustable cuffs with "Hook & Loop" design
Outer shell shown above
Removable Fleece Liner Jacket NOW included!!
Can be worn separately or zipped into the outer shell jacket for
additional warmth
•
•
•
•
•
Polar Fleece Outer Shell
3M Scotchlite Lime Yellow and Silver Triple Trim
Comfort fit knit cuffs
Slash pockets with Velcro tab closures
Drawcord waistband with barrel clips
**Parka is hip length, liner/jacket is waist length
Sizing as follows:
S (36-38)
M (40-42)
2XL (52-54)
add $55.00
4XL (60-62)
add $145.00
L (44-46)
3XL (56-58)
5XL (64-66)
Coat Options:
3 or 4 inch Star of Life on back
5 or 7 inch Star of Life on back
10 inch Star of Life on back
$10.75
$19.00
$28.75
2" or 3" heat applied letters
$3.75 per letter
40
XL (48-50)
add $108.00
add $181.00
Removable thermal liner shown above
*Other Gerber styles
available on our website at:
www.fire-end.com
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
RESCUEWEAR
30E1X - Gerber 911-Tech 3 In 1 Parka
w/ Scout Fleece Liner Jacket, Navy
starting at $375.00
• NFPA 1999, 2008 Certified Blood Impervious
• Tri-Laminant Waterproof / Breathable Outer Shell
• Two lower Cargo Pockets with Fleece lined hand warmers,
equipment keepers and flap closures
• Patch Pocket on left chest, mini glove pocket and flap closure
• Radio Pocket on right chest with flap closure
• Concealable Hood stows in hidden pocket
• Mic tabs on both shoulders
• Hip length
• Jacket does not come with reflective trim
• Interchange Liner Zippers allows the attachement of Liner
• Removable Scout Fleece Liner / Jacket that can be worn
separately or zipped in the shell jacket for additional warmth
• 200 Series Polar Fleece w/ Nylon Shoulder & Elbow Accents
• Slash pockets with Velcro tab closures
• Elasticized Cuffs
• Waist Length
• Removable Jacket/Liner does not come with reflective trim
Chest Sizes Available:
S (36-38)
M (40-42)
2XL (52-54) add $45.00
4XL (60-62) add $119.00
L (44-46)
XL (48-50)
3XL (56-58) add $89.25
5XL (64-66) add $148.00
Coat Options:
3 or 4 inch Star of Life on back
5 or 7 inch Star of Life on back
10 inch Star of Life on back
2" or 3" heat applied letters
$10.75
$19.00
$28.75
$3.75 per letter
Scout Fleece Liner
2” Reflective Trim on Outershell as follows:
Silver front, bottom & cuffs
$23.00
Silver front, bottom, back & cuffs
$26.00
Lime/Silver front, bottom, back & cuffs
$26.00
2” Reflective Trim on Liner as follows:
Silver around chest & waist
Lime/Silver around chest & waist
$6.25
$6.25
40L1 - Gerber 911 Rain Pant
starting at $200.00
Waterproof breathable rainpants made with Stedair EMS outer shell.
Elasticized waistband with drawstring cord and barrel clip adjusters. Cargo
pockets on both thighs, Scotchlite™
Reflective material below each knee, and zippered cuffs. NFPA 1999,
certified
• Stedair EMS fabric, waterproof/breathable.
• Outer shell tri-laminate barrier construction
• NFPA 1999, certified to stop blood borne pathogens.
• Tested and Classified by Underwriters Laboratories.
• Elasticized waistband with drawstring and barrel clip adjusters.
• Large cargo pockets on both thighs with flap closures.
• 2" Scotchlite™ Reflective material below each knee Silver or Lime/Silver.
• Zippered cuff for easy on and off.
Waist Sizes Available:
S (28-32)
M (32-36)
L (36-40)
XL (40-44)
2XL (44-48) add $27.50
3XL (48-52) add $54.50
*Must specify trim color - Silver or Lime/Silver Triple Trim
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
41
WILDLAND PROTECTIVE CLOTHING
Durable protection and lightweight comfort, these Wildland ensembles are fully featured garments that are NFPA 1977
compliant. Meets or exceeds NFPA 1977 Protective Clothing and Equipment for Wildland Fire Fighting, Current Edition.
Available in Nomex IIIa or FR Cotton
Available Colors: Yellow, Red, Royal Blue, Tan, Navy Blue or Black
WILDLAND JACKET
• Inner Zipper with Hook and Pile Closure
• Stand-up Collar w/Hook and Pile Throat Tab
• 9” Radio Pocket w/ Mic Tab & Sewn-on Utility StrapLeft Chest
• (2) Slant-top Semi-bellows Pockets w/Hook & Pile Closure Flap
• Hook and Pile Cinch Straps at Wrists
• Detachable Utility/Glove Strap
• Sizes available as follows:
S (36-38)
2XL (52-54)
M (40-42)
3XL (56-58)
L (44-46)
4XL (60-62)
XL (48-50)
5XL (64-66)
WJU500
WJU500T
WJ6N500
WJ6N500T
Flame-Resistant Cotton
As above w/2” Lime Scotchlite
Triple Trim at Cuffs and Hem
$136.00
$169.50
6 oz. Nomex
As above w/2” Lime Scotchlite
Triple Trim at Cuffs and Hem
$200.00
$233.50
WILDLAND PANTS
Standard Style
• Heavy-Duty Reinforced Waistband with Elastic Back
• Zipper/Snap Closure with Oversize Belt Loops
• Single Rear Patch Pocket with Flap
• Hook and Pile Cinch Straps at Cuffs
• Standard 29” Inseam (other inseams available 25”-36”)
• Sizes available as follows:
S (30-32)
2XL (46-48)
M (34-36)
3XL (50-52)
L (38-40)
4XL (54-56)
XL (42-44)
5XL (58-60)
Flame-Resistant Cotton
As above w/2” Lime Scotchlite
Triple Trim at Cuffs
$100.00
WP6N200 6 oz. Nomex
WP6N200T As above w/2” Lime Scotchlite
Triple Trim at Cuffs
$163.00
WPU200
WPU200T
Sewn on Letter Patch OR Lettering applied direct to back $6.50
2 or 3" Lime Sewn On Scotchlite Lettering (per letter)
$3.50
$117.50
$180.50
Deluxe Style
All of the Standard Pant Features Above PLUS:
• Leg End Zippers for Easier Donning
• Two Slant-top Semi-bellows Pockets with Hook and
Pile Closure Flap
Flame Resistant Cotton
As above w/2” Lime Scotchlite
Triple Trim at Cuffs
$136.00
WP6N500 6 oz. Nomex
WP6N500T As above w/2” Lime Scotchlite
Triple Trim at Cuffs
$200.00
WPU500
WPU500T
$153.50
$217.50
For More Wildland Firefighting See Pages 110-112
42
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
JUMPSUITS
Jumpsuits - Standard Features:
• Two-way Inner Zipper with Hook and Pile Closure
• Stand-up Collar w/Hook and Pile Throat Tab
• 9” Radio Pocket with Mic Tab on Left Chest
• Sewn-on Utility Strap on Left Chest
• 12” Leg Zippers at Cuffs
• Single Rear Patch Pocket with Flap
• Two Large Slant-top Semi-bellows Pockets
w/Hook and Pile Closure Flap
• Pass Through Waist Pockets
• Hook and Pile Cinch Straps at Waist,
Wrists and Cuffs
• Detachable Utility/Glove Strap
• Pass Through Waist Pockets
• Available Colors: Yellow, Red, Royal Blue,
Tan, Navy Blue, Black
Sizing samples are available for group
purchases, please call for details.
EMS Jumpsuit
Basic/Wildland
Jumpsuit
Extrication Jumpsuit
Basic/Wildland Jumpsuit: Includes all standard features shown above
WCC2000
9.5 oz. Indura Flame-resistant cotton
WC6N2000
6 oz. Nomex
*Basic/Wildland Jumpsuits do not include trim.
For 2” Lime/Yellow Scotchlite Triple Trim at cuffs and across back
$256.00
$350.00
Add: $23.50
EMS Jumpsuit: Includes all standard features PLUS: crossover stethoscope pocket, 2 rear pockets, pencil/flashlight pocket, five
compartment multi-pocket on right thigh and 2” Lime/Yellow Scotchlite Triple Trim at cuffs and across back.
EJC3000T
EJ6N3000T
9.5 oz. Indura Flame-resistant cotton
6 oz. Nomex
$306.00
$406.00
Extrication Jumpsuit: Includes all of EMS features PLUS: Reinforced/padded knees, reinforced/padded elbows, cotton lined sleeves
and 2” Lime/Yellow Scotchlite Triple Trim at cuffs and across back. *No NFPA Certifying Label*
XJC4000T
XJ6N4000T
9.5 oz. Indura Flame-resistant cotton
6 oz. Nomex
Chest & Waist
32/34
Garment Size
S
Std. Sleeve Length 32”
Std. Inseams
28” or 30”
**Short
61.5”-63.5”
**Regular
63.5”-65.5”
**Tall
65.5”-67.5”
36/38
M
33”
69”-71”
71”-73”
73”-75”
40/42
44/46
L
XL
34”
35”
28” or 30” or 32”
71.5”-73.5”
76”-78”
73.5”-75.5”
74”-76”
75.5”-77.5”
78”-80”
$361.00
$494.00
48/50
2XL
36”
52/54
3XL
37”
78.5”-80.5”
76.5”-78.5”
80.5”-82.5”
79”-81”
81”-83”
88”-90”
56/58
4XL
38”
30” or 32”
81.5”-83.5”
83.5”-85.5”
85.5”-87.5”
60/62
5XL
39”
84”-86”
86”-88”
88”-90”
**These are not height measurements. They are vertical circumference, which is one continuous measurement of the length of the
body torso. It has to be taken top to bottom, starting at the base of the collar on the back, running down and around the crotch
(between the legs) and up to the Adam’s apple on the front. Do not measure the front and just double it, this will not work. It must
be one continuous measurement.
Additional Options:
6.5” Reflective Maltese Cross or Star of Life on patch $21.50
2” or 3” Lime Yellow Scotchlite letters (*Must order letter patch below if ordering lettering) $3.50 per letter.
Letter Patch w/ Velcro $15.50 (add additional per letter charge from above for lettering)
Letter Patch Sewn On $10.75 (add additional per letter charge from above for lettering)
Discounts are available for 25 or more jumpsuits. Please call for pricing.
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
43
STATIONWEAR
Bravo Shirt, NFPA 1975 Compliant*
Seven-button dress front placket has professional appearance. Provides stability even
after multiple washings. Fully cured for permanent press and easy to maintain. Five
sewn-in military creases for high-quality appearance with minimum maintenance.
Includes shoulder epaulets, box-pleated breast pockets (left pocket has pen slot on
flap), interior badge sling holder and fuse banded dress collar.
Available in 4.5 oz. Nomex IIIA, 5.4 oz. FireWear and 4.5 oz. Poly/Cotton
Male
LS Navy Blue
SS Navy Blue
LS Med Blue
SS Med Blue
LS White
SS White
No.
0215-00
0515-00
1283-00
1583-00
N/A
N/A
Nomex
$94.00
$87.00
$94.00
$87.00
N/A
N/A
No.
1373-00
1473-00
1374-00
1474-00
N/A
N/A
FireWear
$80.00
$74.00
$80.00
$74.00
N/A
N/A
No.
1276-10
1576-10
1272-10
1572-10
1271-10
1571-10
*Poly/Cotton
$35.00
$31.00
$35.00
$31.00
$35.00
$31.00
* Poly/Cotton is not NFPA compliant.
Bravo Shirt 100% NFPA Certified Cotton Twill, NFPA 1975 Compliant*
Seven-button dress front placket has professional appearance. Provides stability even after multiple washings.
Fully cured for permanent press and easy to maintain. Five sewn-in military creases for high-quality appearance
with minimum maintenance. Includes shoulder epaulets, box-pleated breast pockets (left pocket has pen slot on
flap), interior badge sling holder and fuse banded dress collar.
Navy
Med Blue
White
Long Sleeve
0227NV-10
0227MB-00
0227WH-00
$47.00
$47.00
$47.00
Short Sleeve
0527NV-10
0527MB-00
0527WH-00
$43.00
$43.00
$43.00
Traditional Style Trouser, NFPA 1975 Compliant*
No roll waistband, left and right front swing type pockets, two welt style hip pockets, top stitched side seam,
heavy duty zipper. Available in Nomex IIIA Gabardine (G), 7.5 oz. Nomex IIIA Plain Weave (P), 7.0 oz. Flamex
II, 5.4oz. FireWear, 4.5oz. Poly/Cotton and 100% Cotton.
Male/Mid Blue
Female M-Blue
No.
2106-30
7114-20
Nomex/G
$124.00
$124.00
No.
2101A-10
Nomex/P
$110.00
Male/Mid Blue
Female M-Blue
No.
0130-30
7121-10
Poly/Cotton*
$41.00
$41.00
No.
0150NV-00
7141NV-00
100% Cotton
$49.00
$49.00
No.
2160-20
7113-20
FireWear
$94.00
$94.00
* Poly/Cotton is not NFPA compliant.
Job Shirt in 80% Cotton / 20% Polyester Fleece Knit
Light, warm, and comfortable -The Job Shirt is constructed out of traditional fleece. It provides lightweight
warmth, breathability, and comfort. In addition to a zip-through collar, the Job Shirt also features ribbed cuffs
and waistband to help keep wind and cold out.
Unisex S-5XL
Navy Cotton / Poly Fleece
LJB11-00
$36.50
*Poly/Cotton is not NFPA Compliant.
44
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
HAIX STATION / EMS SHOES
KOC O
T
S YT
IN
AD
E
R P!
I
SH
607-628 HAIX® AIRPOWER® R8
$201.00
(NY State Contract Pricing Available)
Station/Ems Boot
• Leg Height: 4”
• Waterproof/Breathable w/ CROSSTECH®
• Blood-Borne Pathogen & Chemical Resistance
• Steel Protective Toe Cap
• Heat Resistant & Puncture Protection Sole
• Non Marking, Antistatic, Extremely Slip
Resistant Rubber Sole
• HAIX® Arch Support System
• NFPA 1999
Men’s 5-15 Whole, Half Sizes 4.5-14.5
Medium, Wide, Extra Wide
*Dual Gender Sizing - Call for assistance
605-111 HAIX® AIRPOWER® R1
$226.00
605-109 HAIX® AIRPOWER® R2
(NY State Contract Pricing Available)
Station/Ems Boot
• Leg Height: 8”
• Waterproof/Breathable w/ CROSSTECH®
• Blood-Borne Pathogen & Chemical Resistance
• Steel Protective Toe Cap & Additional TPU
Toe Cap
• Heat Resistant & Puncture Resistant Sole
• Non Marking, Antistatic, Extremely Slip
Resistant Rubber Sole
• HAIX® Secura Liner
• HAIX® Climate & Lacing System
• NFPA 1999
Men’s 5-15 Whole, Half Sizes 4.5-14.5
Medium, Wide, Extra Wide
*Dual Gender Sizing - Call for assistance
$233.00
(NY State Contract Pricing Available)
Station/Ems Boot
• Leg Height: 8”
• Waterproof/Breathable w/ CROSSTECH®
• Blood-Borne Pathogen & Chemical
Resistance - Chem Bio Class II & III
• Steel Protective Toe Cap
• Heat Resistant & Puncture Protection Sole
• Non Marking, Antistatic, Extremely Slip
Resistant Rubber Sole
• HAIX® Secura Liner
• HAIX® Climate & Lacing System
• NFPA 1999
Men’s 5-15 Whole, Half Sizes 4.5-14.5
Medium, Wide, Extra Wide
*Dual Gender Sizing - Call for assistance
NEW BLACK EAGLE® Series
by Haix®
300101 HAIX® TACTICAL 20 LOW
300102 HAIX® TACTICAL 20 MID
300103 HAIX® TACTICAL 20 HIGH
300001 HAIX® ATHLETIC 10 LOW
300002 HAIX® ATHLETIC 10 MID
300003 HAIX® ATHLETIC 10 HIGH
• Based on advanced running technology
• Light, dynamic, extremely slip resistant
• Highly breathable & durably waterproof
• Gore-tex® Inside
• HAIX® Systems: Shock absorption, Energy Return,
Stabilizer, Anti Slip, Durable Sole, Antibacterial Insole,
Metal Free
• Low: Smart Lacing
• Mid/High: Climate System/Ankle Protection,
2-Zone Lacing
• Sizing 4-16 Whole, Half Sizes 4.5-12.5
300001 Low: Shown
300002 Mid: 6 Inches
300003 High: 8.3 Inches
$126.50
$129.50
$137.50
300102
• All leather, based on advanced running technology
• Light, dynamic, extremely slip resistant
• Highly breathable & durably waterproof
• Gore-tex® Inside
• HAIX® Systems: Shock absorption, Energy Return,
Stabilizer, Anti Slip, Durable Sole, Antibacterial Insole,
Metal Free
• Low: Smart Lacing
• Mid/High: Climate System, Ankle Protection,
2-Zone Lacing
• Sizing 4-16 Whole, Half Sizes 4.5-12.5
300101 Low: Shown
300102 Mid: Shown left
300103 High: 8.3 Inches
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
$127.50
$133.50
$141.50
45
ANSI VESTS
Alert Vision Safety Vest
AV-51131
$14.50
• 5 Point Breakaway
• ANSI Class 2, 107-2004, 207-2006
• Dull Mesh
• Velcro Front Closure
• Lime/Yellow
• 2" Trim
• Available in Sizes M, 2XL, 5XL
• Add $14.00 for Custom Lettering - available in 1", 2" or 3"
Choice of Black, Navy, Yellow, Orange or Red lettering
• If ordered with lettering, vest bag is included
• Please specify lettering
AV-51131
Alert Vision Public Safety Vest
$36.50
AV-51111 Lime/Yellow Dull Mesh
AV-51211 Red/Orange Dull Mesh
AV-72112 Lime/Yellow Warp Knit
AV-72212 Red/Orange Warp Knit
• 7 Point Breakaway
• ANSI Class 2, 107-2004, 207-2006
• Dull Mesh or Warp Knit
• Velcro & Zipper Front Closure
• Available in Lime/Yellow or Red/Orange
• Contrast Split Trim
• Available in Sizes M, 2XL, 5XL
• Price Includes Personal Vest Bag w/ lettering
• Price Includes Custom Lettering - available in 1", 2" or 3"
Choice of color: Black, Navy, Yellow, Orange or Red lettering
• Please specify lettering
AV-51111
Public Safety Vest
ANSI Solid, Open-Sided, Gro-Grain Vest
5-Point Breakaway, Velcro closure
• Meets ANSI 107-2004 & 207-2006
• Adjustable Velcro Front Closure
• Adjustable Velcro Sides
• Lime Yellow Vest
• Silver Reflective Trim
• Sizes: Regular (M-2X) or Oversize (3X-5X)
*Available w/ Lettering
Panel - Call for pricing
Radio Pocket / Badge Holder
(*Only on VAF-OSP2GBV)
V+AF-OSC2GBV
VAF-OSP2GBV
Regular
$17.50
$23.00
Oversize
$23.00
$28.50
VAF-OSP2GBV
V+AF-OSC2GBV
*Some stipulations exist when ordering lettering - if we cannot fit your choices, we will contact you for confirmation
46
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
HI-VISIBILITY JACKETS
70ML - Gerber Medix 3 in 1 HV Parka
w/ Fleece Liner
starting at $181.25
• ANSI 107 Class 3
• Waterproof / Breathable Outer Shell
• BioTex Blood-Borne Pathogen Resistant Barrier
• Two lower Cargo Pockets with Fleece lined hand warmers,
equipment keepers and flap closures
• Patch Pocket on left chest with flap closure
• Radio Pocket on right chest with flap closure
• 2” Silver Trim w/ 1/4" Black edging on the Front, Bottom,
Back and Cuffs
• Concealable Hood stows in hidden pocket
• Mic tabs on both shoulders
• Hip length
• ANSI 107 Class 3 Removable Liner / Jacket that can be worn
separately or zipped into the shell for additional warmth
• Polar Fleece outer fabric
• Slash pockets with Velcro tab closures
• 2” Silver Trim w/ 1/4" Blck edging around the chest and waist
• Elasticized Draw cord Waist
• Comfort fit Knit cuff
Chest Sizes Available:
S (36-38)
M (40-42)
2XL (52-54) add $25.50
4XL (60-62) add $68.00
L (44-46)
XL (48-50)
3XL (56-58) add $51.00
5XL (64-66) add $85.00
Coat Options:
3 or 4 inch Star of Life on back
5 or 7 inch Star of Life on back
10 inch Star of Life on back
2" or 3" heat applied letters
$10.75
$19.00
$28.75
$3.75 per letter
Medix Liner
70RXL - Gerber Eclipse SX Jacket, Lime Yellow
$197.50
Waterproof breathable ANSI 107:2010 Class 3 compliant jacket.
Lime-yellow waist length jacket with black edge reflective trim.
• BioTex Blood Born Pathogen Resistant Barrier ASTM F 1671
• Reflective LumenX accent material
• SX Soft Shell Liner / Jacket can be worn separately or zipped in
• Two way cargo pockets with fleece hand warmers
• Mic Tabs on both shoulders
• Waterproof zippered pockets on both sides of chest
• Waist length with extended tail
• Concealable hood
Chest Sizes Available:
S (36-38)
M (40-42)
2XL (52-54) add $25.50
4XL (60-62) add $68.00
L (44-46)
XL (48-50)
3XL (56-58) add $51.00
5XL (64-66) add $85.00
Coat Options:
2" or 3" heat applied letters
$3.75 per letter
SX Soft Shell
*Other Gerber styles available on our website at: www.fire-end.com
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
47
HI-VISIBILITY JACKETS
71E1/L - Gerber Extreme Parka
starting at $137.50
Extreme Parka
• Waterproof / Breathable Outer Shell
• BioTex Blood Born Pathogen Resistant Barrier
ASTM F 1671
• Two tone design Lime Yellow with Navy accents
• ANSI 107:2010 Class 3 with 2” silver Scotchlite
striping with ¼” black edging
• Spacious set-in chest pockets with Mic Wire
Management system • Concealable hood
• Two way cargo pockets
• Two way patch pockets with flap closures
• Mic tabs on both shoulders
• Dual Interior zippers which accepts the
Scout Fleece Liner Jacket as a liner
51F1 Scout Fleece Liner Jacket
starting at $93.75
• High loft, Low Pill fleece
• Nylon Shoulder and Elbow Accent Reinforcements
• Zippered hand pockets
• Side equipment zippers
• Adjustable cuffs with velcro closures
• Segmented mic strips on shoulders
• Interchange Front Zipper – Zips into the Extreme Parka
• Available in Navy or Black
Scout Fleece
Liner Jacket
Chest Sizes Available:
S (36-38)
M (40-42)
L (44-46)
XL (48-50)
2XL (52-54) add $19.75 3XL (56-58) add $39.50
4XL (60-62) add $52.50 5XL (64-66) add $65.50
AV-AWS-300 Alert Visions All Weather Parka
$98.50
• ANSI/ISEA 107-2006 Class 3 Compliant
• Shell: Polyester with Breathable Waterproof Coating • Lining: Nylon Taffeta
Color: Neon Lime • Reflective Material: 3M Scotchlite Silver Reflective
• Reflective Trim 2” Wide. • Pockets: Large Left and Right Fleece Lined Cargo
Pockets with Flaps, 1 Inside Pocket with Zipper Closure, 1 Inside Pocket with
Velcro • Front Closure: Heavy Duty Zipper Concealed by Storm Flap with Snap
Closures • Cuff: Elastic for Snug Fit with Snap Adjustment Strap
• Hood: Concealable in Collar, Draw String for Snug Fit
• Sizes: S-2XL, 3XL & 4XL $118.00
Black Lettering - Add $7.00
Silver Lettering - Add $15.00
AV-AWS-300
AV-AWS-310
(zips inside Parka)
AV-AWS-310 Alert Visions All Weather Bomber w/Liner Jacket
$77.50
• Same as above, zips into AV-AWS-300 or worn by itself
• Lining: black fleece
• Pockets: Large Left and Right Fleece Lined Zippered
Pockets, Inside Pocket with Velcro Closure • Front Closure: Heavy Duty Zipper
• Waist: Elastic for Snug Fit
• Sizes: S-2XL, 3XL & 4XL $92.50
Black Lettering - Add $7.00
Silver Lettering - Add $15.00
AV-AWS-320
AV-AWS-320 Alert Visions All Weather Pant, ANSI Class E
$65.50
• ANSI Class 3 Compliant
• 12 inch Zippered Leg Openings
48
• Waterproof and Breathable
• Sizes: S-2XL
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
FIRE POLICE ACCESSORIES
LED Baton Road Flare
LED Baton Road Flares are emergency safety flares that replace standard safety
wands and incendiary flares. Use of these safety flares reduces the risk of fires,
ground water contamination, and batteries in our landfills.
• 15 LEDs visible up to 1/2 mile
• Waterproof to 50 feet
• Crush proof
• Corrosion proof
• Rechargeable battery included
• 5 Flash patterns
• High strength magnets
• Available red/orange or yellow
Includes:
Single: 120V wall charger, 12V car charger, USB charger
Kit: Storage case (also charging unit), 120V wall charger,
12V car charger, USB charger 2-Flex Fit Tripods
$29.50 - Single Baton
$106.50 - 3 Pack
1154 Single Yellow (shown)
1155 Single Red/Orange
1156 3 Pack Red/Orange (shown)
1157 3 Pack Yellow
Super LED Road Safety Flare
An advanced version of the standard LED flare. It is slightly larger for double the
light output and two rows of red LED lights. It does not produce a flame, smoke,
or harmful bi-products and does not require batteries! Recharges so that it is
ready for use when needed. Three LED colors to choose from.
• 24 super bright LEDs visible light range over 7 miles, effectively see the light
patterns up to 2 miles
• 5 Flash patterns
• Intrinsically safe
• Powerful magnet to attach metal
• Crush proof
• Corrosion proof
• Waterproof 50 feet
• Available red/orange or yellow
Includes:
Single: 120V wall charger, 12V car charger, Storage bag
Kit: Storage case (also charging unit), 120V wall charger, 12V car charger,
2-Flex-Fit Tripods
$34.50 - Single Flare
1164 Single - Yellow
1165 Single - Red/Orange (shown)
1166 4 Pack - Red/Orange
1167 4 Pack - Yellow (shown)
$198.50 - 4 Pack
28" Safety Cone - Collapsible Kit 5-Pack
1193 - $95.00
28" collapsible safety cone kit is compact and stores easily in a car trunk,
utility truck, or tool box. Set of 5 cones included in kit.
• Collapses flat for easy storage
• Made of durable nylon
• 2 ½ lb. weighted base
• 2 Reflective stripes
• Blinking red LED beacon
• Requires 2 AAA batteries (not included)
• Includes the storage case that holds the cone and light
Meets MUTCD specifications (4" & 6" reflective bands)
Meets NFPA 1901 Standards; Section 6.7.3 Miscellaneous
Applications: roadside safety, construction sites, warehouse/retail hazard
identification, emergency services personnel, and personal automotive safety.
Hi-Viz Traffic Control Gloves
Ringers Model 307
•
•
•
•
Bright, highly visible color
• Reflective strips on palm
Quick pull-on design
• Great flexibility
Ideal for traffic control, Fire Police, general purpose construction, & industrial safety.
Sizes S-2XL
1-11
$11.95
12+
$11.50
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
49
ICE RESCUE
I595 COLD WATER / ICE RESCUE SUIT
Rescue doesn’t wait for the ice to melt. For situations when harsh, icy conditions are unavoidable, get
the Stearns® Ice Rescue Suit. Made with 100% closed-cell neoprene and featuring a built-in chest
harness with stainless steel D-rings for improved lift assistance and added clip-on storage, you’ll be
ready to tackle even the most formidable outdoor rescue scenarios. 3M™ Scotchlite™ SOLAS-grade
reflective strips increase visibility and five-fingered gloves allow for maximum dexterity while thicksoled, heavy- tread boots provide sure footing—even on ice. Multiple ice pick pockets on wrist and
torso areas fit all brands of ice picks, providing quick, direct access to tools when you need them.
Reinforced knees and elbows ensure comfort and durability, and the off-set zipper on face guard better
protects the skin from wet, freezing weather. Break the ice – and protect yourself while you’re protecting others – with the Stearns® Ice Rescue Suit.
•Made with 100% closed-cell neoprene
•Chest harness with stainless steel D-rings for improved lift assistance and added clip-on storage
•3M™ Scotchlite™ SOLAS-grade reflective strips on front and back for high visibility
•Built-in ice pick pockets on wrist and torso areas fit all brands of ice picks
•Five-fingered gloves for dexterity in the water
•Thick-soled, heavy- tread boots for sure footing, even on ice
•Reinforced knees and elbows and off-set zipper on face guard better protects from harsh conditions
•Universal-fit boots
•Not USCG-approved, reduced buoyancy
SIZES:
Universal
Oversized
$455.00
$518.00
I595
I465 THE VERSATILE
I416 THE DECK HAND
Our best selling, most versatile vest. Tough nylon
shell with seven piece-foam design for all-day
comfort. Features four roomy pockets with full
Velcro closures and rustproof Vislon zipper.
• Multiple foam inserts for exceptional
flexibility and freedom.
• Adjustable sides for fit and comfort.
• 64 square inches of SOLAS grade reflective
panels.
Heavy-duty flotation vest features ten flotation
panels for a comfortable contoured fit. Has rustproof Vislon zipper and heavy-duty encircling body
belt.
• Features side and shoulder adjustments.
• Sizes for a comfortable fit.
• Tough nylon shell.
• 64 square inchesw of SOLAS grade reflective
panels.
APPROVAL: USCG Approved Type III
Color: International Orange
APPROVAL: USCG Approved Type III
Color:
International Orange
I465
50
SIZES:
S, M, L, XL, XXL
XXXL
$66.00
$69.00
I416
SIZES:
S, M, L, XL, XXL
XXXL
4XL-7XL
$49.00
$51.00
$59.00
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
ROCK-N-RESCUE EQUIPMENT
We carry a full line of Rock-N-Rescue Equipment
NRS, Havoc Helmet
426045-R/Y
Technical Rescue Equipment Fire, EMS, Search & Rescue, Water, Rope
*Call for pricing
R-N-R, Escape System w/ FireTec 32
Personal Escape Rope, F4 Descender and
the Lightning GT Hook
DRESF44
We carry a full line of rescue and utility
ropes, sold by the foot and preset lengths
R-N-R, Grand Rope Bag
RPB
Crosby Hook
S-360
STERLING, Tech
Extension Lanyard
SCS90APLY0X
Omega Pacific, NFPA
Small Aluminum
Locking D Carabiner
BINER2
1" Tubular Nylon
Webbing
060101
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
51
THREADED ADAPTERS
35R - Rocker Lug Double Swivel Female
K-Coat Aluminum
FEMALE
F
E
M
A
L
E
1.5”
$15.50
$23.50
$26.00
$23.50
1.5”
2.0”
2.5”
3.0”
3.5”
4.0”
4.5”
5.0”
6.0”
2.0”
$23.50
$23.50
$25.50
3.0”
3.5”
4.0”
4.5”
5.0”
6.0”
$48.50
$40.50
$71.00
$77.50
$88.50
$65.50
$71.00
$65.50
$80.50
$86.00
$84.50
$88.50
$86.00
$83.00
$74.50
$121.50
$99.50
$109.50
$111.00
$126.00
$121.50
$111.00
$66.50
$77.50
$80.50
$83.50
$83.00
$126.00
$156.50
$154.50
$156.50
$141.00
$172.00
$160.50
$156.50
$154.50
$156.50
$141.00
$127.00
3.5”
$82.00
$91.50
$88.00
$115.00
$132.50
$133.00
$167.00
4.0”
$88.00
$105.00
$115.00
$93.50
$101.00
$117.50
$149.00
4.5”
$82.00
$111.50
$132.50
$101.50
$120.00
$127.50
$151.50
5.0”
$119.00
$119.50
$133.00
$117.50
$127.50
$151.00
$168.50
6.0”
$169.50
$158.50
$167.00
$149.00
$151.50
$168.50
$171.50
3.5”
4.0”
4.5”
5.0”
6.0”
$46.50
$60.50
$51.00
$60.00
$52.50
$70.50
$60.00
$57.00
$58.00
$69.50
$66.00
$78.00
$121.50
$159.00
$151.00
2.5”
$26.00
$25.50
$21.00
$48.50
$65.50
$66.50
$84.50
$99.50
$109.50
$172.00
$160.50
$121.00
57L - Long Handle Double Swivel Female
K-Coat Aluminum
F
E
M
A
L
E
FEMALE
2.5”
$36.50
$57.50
$82.00
$88.00
$82.00
$119.00
$169.50
2.5”
3.0”
3.5”
4.0”
4.5”
5.0”
6.0”
3.0”
$57.50
$54.00
$91.50
$105.00
$111.50
$119.50
$158.50
36R - Rocker Lug Double Male
K-Coat Aluminum
MALE
M
A
L
E
.75”
1.0”
1.5”
2.0”
2.5”
3.0”
3.5”
4.0”
1.0”
$10.50
$11.50
$21.50
$21.50
$21.50
1.5”
$22.50
$21.50
$ 9.00
$17.50
$19.00
2.0”
$22.50
$21.50
$17.50
$18.00
$25.50
$47.00
2.5”
$22.50
$21.50
$19.00
$25.50
$12.50
$33.50
$46.50
$52.50
3.0”
$47.00
$33.50
$31.00
$60.50
$70.50
4.5”
$58.00
$69.50
$66.00
$78.00
5.0”
$121.50
$159.00
$151.00
$81.00
$101.00
6.0”
$81.00
$101.00
$62.00
$82.50
$97.50
$82.50
$68.00
$80.50
$97.50
$80.50
$109.50
ALL ITEMS ON THIS PAGE AVAILABLE IN COLORS & ENGRAVED!
If ordered without color, adapters will be black - Call for pricing
52
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
THREADED ADAPTERS
37R - Rigid Rocker Lug Female to Male
K-Coat Aluminum
MALE
F
E
M
A
L
E
.75”
1.0”
1.5”
2.0”
2.5”
3.0”
3.5”
4.0”
4.5”
.75”
$ 8.50
$10.00
$14.00
$22.00
$25.00
1.0”
$ 11.50
$ 11.50
$13.00
$20.50
$24.50
1.5”
$13.00
$13.00
$12.50
$15.00
$14.50
$43.50
2.0”
$20.50
$21.00
$13.00
$20.50
$18.00
$47.00
5.0”
6.0”
2.5”
$21.50
$21.00
$15.00
$22.00
$16.00
$33.00
$35.00
3.0”
$44.50
$45.50
$28.50
$32.00
$71.50
$76.00
3.5”
4.0”
5.0”
4.5”
$34.00
$69.50
$60.50
$61.00 $64.00
$74.00
$75.00 $91.00 $101.00
$88.00
$74.00 $85.00
$99.50
$59.50
$68.50 $88.50
$76.50
$90.00
$82.00 $89.00 $111.00
$87.50
$72.00
$89.50 $105.50 $101.00
$96.50
$91.00
$90.00
$187.50 $178.00 $181.50 $124.50 $133.50 $127.00
6.0”
$106.50
$108.50
$120.50
$130.50
$137.00
$153.00
$157.50
54R - Rocker Lug Swivel Female to Male
K-Coat Aluminum
MALE
F
E
M
A
L
E
1.5”
2.0”
2.5”
3.0”
3.5”
4.0”
4.5”
5.0”
6.0”
1.5”
$20.50
$23.50
$25.50
2.0”
$23.50
$24.50
$39.50
2.5”
3.5”
3.0”
4.0”
$27.50
$38.50
$69.50
$57.00
$62.00
$41.50
$85.50 $111.50
$52.50
$58.00
$86.00 $100.50 $143.50
$70.50
$101.50 $109.50 $129.50 $121.50
$106.00 $121.50 $159.00 $135.00
$133.00 $135.50 $162.00 $178.00
5.0”
4.5”
$90.50
$123.00
$163.00
$144.00
$164.50
$155.00
$180.00
$195.00
$137.00 $195.50
$197.00 $219.50
$221.50 $248.50 $239.50 $193.00 $226.50 $210.50
6.0”
$199.50
$189.00
$245.50
$198.50
$232.50
$210.50
$235.00
53R - Rocker Lug Swivel Female to Rocker Lug Rigid Female
K-Coat Aluminum
FEMALE
S
W
I
V
E
L
1.5”
2.0”
2.5”
3.0”
3.5”
4.0”
4.5”
5.0”
6.0”
1.5”
$20.00
$25.50
$34.00
2.0”
$23.50
$25.50
$41.00
2.5”
$29.00
$39.50
$43.00
$61.00
$73.50
$74.50
$107.50
$134.50
$212.50
3.0”
3.5”
4.0”
5.0”
6.0”
$168.00
$122.50
$185.50
$200.50
$193.00
$216.50
$208.50
$204.00
$193.50
$251.00
$209.50
$216.00
$211.50
$231.00
4.5”
$57.50
$64.50 $94.50
$73.50
$55.50
$90.00 $116.50 $125.50
$87.50 $104.50 $149.00 $169.50
$103.50 $145.50 $128.50 $153.00
$123.50 $161.00 $136.50 $140.50
$137.50 $163.50 $178.00 $192.50
$235.00 $237.50 $199.50 $231.00
ALL ITEMS ON THIS PAGE AVAILABLE IN COLORS & ENGRAVED!
If ordered without color, adapters will be black - Call for pricing
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
53
THREADED ADAPTERS
54L - Long Handle Swivel Female to Male
K-Coat Aluminum
S
W
I
V
E
L
MALE
Size
2.5”
3.0”
3.5”
4.0”
4.5”
5.0”
6.0”
2.5”
$ 48.50
$ 64.00
$ 77.50
$ 89.50
$108.00
$166.00
$226.50
3.0”
$ 63.50
$ 58.50
$ 93.50
$157.50
$128.50
$142.50
$241.50
3.5”
$ 76.00
$ 92.50
$108.50
$148.00
$170.00
$167.00
$245.00
4.0”
$ 76.00
$119.50
$151.00
$130.50
$141.00
$181.50
$203.50
4.5”
$ 97.50
$128.50
$170.50
$152.00
$144.00
$201.50
$243.00
5.0”
$158.00
$159.00
$186.50
$201.50
$202.50
$226.50
$226.00
6.0”
$203.00
$189.50
$250.50
$199.00
$238.50
$227.00
$238.50
53L - Long Handle Swivel Female to Rocker Lug Rigid Female
K-Coat Aluminum
FEMALE
S
W
I
V
E
L
Size
1.5”
2.0”
2.5”
3.0”
3.5”
4.0”
4.5”
5.0”
6.0”
1.5”
2.0”
2.5”
3.0”
3.5”
4.0”
4.5”
5.0”
6.0”
$36.00
$42.00
$ 44.50
$ 58.00
$ 69.50
$ 70.50
$103.00
$154.00
$208.00
$ 58.00
$ 54.50
$ 84.50
$ 96.50
$117.50
$130.50
$223.50
$ 69.50
$ 84.50
$ 97.00
$136.50
$151.50
$154.00
$225.50
$ 63.50
$109.00
$135.50
$118.00
$129.50
$166.50
$187.00
$ 89.00
$117.50
$154.00
$139.50
$132.50
$186.00
$219.00
$155.00
$146.00
$162.00
$186.00
$186.50
$207.50
$203.50
$187.00
$174.00
$225.50
$188.00
$219.50
$204.00
$226.00
4.0”
$ 82.50
$ 90.00
$101.00
$ 91.00
$102.00
$107.00
$133.50
4.5”
$ 89.50
$ 111.00
$ 112.00
$ 111.50
$ 111.50
$ 125.00
$142.50
5.0”
$132.50
$121.50
$110.00
$120.50
$135.00
$154.00
$162.50
6.0”
$162.50
$159.00
$151.00
$151.00
$160.50
$181.50
$181.00
56L - Rigid Long Handle Female to Male
K-Coat Aluminum
F
E
M
A
L
E
MALE
Size
2.5”
3.0”
3.5”
4.0”
4.5”
5.0”
6.0”
2.5”
$ 48.50
$ 53.00
$ 56.50
$ 80.50
$ 88.00
$114.00
$198.00
3.0”
$ 47.00
$ 52.00
$ 89.00
$ 97.00
$111.00
$145.00
$187.00
3.5”
$ 54.50
$ 91.00
$ 83.50
$ 97.50
$160.50
$118.50
$182.00
ALL ITEMS ON THIS PAGE AVAILABLE IN COLORS & ENGRAVED!
If ordered without color, adapters will be black - Call for pricing
54
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
STORZ ADAPTERS
S37S - Storz to Rocker Lug Female Rigid Thread
4”, 5” and 6” Storz with Locks
K-Coat Aluminum
S
T
O
R
Z
FEMALE
2.5”
3.0”
4.0”
5.0”
6.0”
2.5”
$31.50
$31.50
$67.00
$95.50
4.5”
3.0”
5.0”
4.0”
3.5”
$36.00
$37.00
$72.00 $ 75.50 $ 78.50 $87.50 $92.50
$100.50 $103.00 $ 108.00 $110.00 $110.50
$124.00 $139.50 $147.00
6.0”
$109.50
$132.50
$149.00
S54R - Storz to Rocker Lug Female Swivel Thread
4”, 5” and 6” Storz with Locks
K-Coat Aluminum
S
T
O
R
Z
FEMALE
2.5”
3.0”
4.0”
5.0”
6.0”
2.5”
$48.50
$58.50
$83.00
$99.50
3.0”
3.5”
4.0”
4.5”
5.0”
$52.00
$92.50 $110.50 $108.50 $117.00 $124.00
$119.50 $117.00 $115.50 $113.50 $114.50
$138.00 $138.50 $159.50
6.0”
$138.00
$142.00
$165.00
S54L - Storz to Long Handle Female Swivel Thread
4”, 5” and 6” Storz with Locks
K-Coat Aluminum
S
T
O
R
Z
FEMALE
2.5”
3.0”
4.0”
5.0”
6.0”
3.0”
4.5”
2.5”
4.0”
5.0”
3.5”
$55.00
$62.00 $70.00
$95.50 $99.50 $108.50 $118.00 $119.00 $124.00
$104.00 $117.50 $120.00 $122.00 $124.00 $131.50
$158.50 $171.00 $179.50
6.0”
$143.00
$152.00
$200.50
S36S - Storz to Male Rigid Thread
4”, 5” and 6” Storz with Locks
K-Coat Aluminum
S
T
O
R
Z
MALE
4.5”
3.0”
2.5”
5.0”
4.0”
3.5”
6.0”
2.5”
$35.50 $37.50
3.0”
$36.50 $37.50
4.0”
$72.50 $80.00 $85.00 $81.50 $87.50 $91.50
$92.50
5.0”
$91.00 $91.50 $101.00 $101.50 $102.50 $102.00 $109.50
6.0”
$121.50 $128.00 $132.50 $140.00
ALL ITEMS ON THIS PAGE AVAILABLE IN COLORS & ENGRAVED! - Call for pricing
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
55
STORZ ADAPTERS
S60S - Storz to Storz
4”, 5” and 6” Storz with Locks
K-Coat Aluminum
S
T
O
R
Z
Size
2.5”
3.0”
4.0”
5.0”
6.0”
3.0”
$64.00
2.5”
$64.00
$94.00
$95.50
4.0”
$94.00
$99.00
$99.00
$100.00
$115.00
$134.50
5.0”
$95.50
$100.00
$115.00
6.0”
$134.50
$146.50
$146.50
CAPS
Threaded Caps
K-Coat Aluminum
Part #
CC605
CC505
CC455
CC405
CC355
CC305
CC255
CC205
CC155
CC105
Size
6.0”
5.0”
4.5”
4.0”
3.5”
3.0”
2.5”
2.0”
1.5”
1.0”
NST Rocker Lug (2)
w/o Chain
with Chain
$74.50
$70.50
$49.00
$46.00
$43.00
$40.00
$38.50
$35.00
$29.00
$26.00
$21.50
$18.50
$17.50
$14.00
$15.50
$12.50
$11.00
$8.00
$11.00
$8.00
NST Long Handle (1)
w/o Chain with Chain
$92.00
$95.00
$65.00
$68.00
$60.00
$62.50
$55.50
$58.50
$32.00
$35.00
$26.00
$29.00
$22.00
$25.00
Caps Ordering Example: CC1552 = 1.50” Cap NST Rocker Lug
CC5051 = 5.0” Cap NST Long Handle
Storz Caps with Chain
K-Brite Aluminum
Part #
CC607
CC507
CC407
CC307
CC257
Size
6.0”
5.0”
4.0”
3.0”
2.5”
High Pressure with Pentagon Head
$89.50
$48.00
$34.50
$25.00
$22.00
Add $10.00 for Locks
Add $12.50 for Petcocks
Part #
CC507-003
CC407-003
Size
5.0”
4.0”
$70.00
$53.00
Tip: Order S375 on pg. 53 along with one
of these caps in K-Coat Colors to convert a
threaded hydrant or discharge to Storz.
ALL ITEMS ON THIS PAGE AVAILABLE IN COLORS & ENGRAVED!
Call for pricing
56
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
PLUGS
Threaded Plugs - K-Coat Aluminum
NST Rocker Lug
Part #
P 6052
P 5052
P 4552
P 4052
P 3552
P 3052
P 2552
P 2052
P 1552
P 1502
w/o Chain
Size
w/Chain
$73.00
6.0”
$76.00
$56.50
5.0”
$59.50
$50.50
4.5”
$53.50
$39.00
4.0”
$42.00
$25.50
3.5”
$28.50
$21.00
3.0”
$24.00
$17.00
2.5”
$20.00
$12.50
2.0”
$16.00
$12.00
1.5”
$15.00
$10.50
1.0”
$13.50
Add L for without chain and C for with chain
MOUNTING PLATES
Threaded Mounting Plates
MALE
Part #
M 60
M 50
M 45
M 40
M 30
M 25
M 15
M10
Size
6.0”
5.0”
4.5”
4.0”
3.0”
2.5”
1.5”
1.0”
Ordering Example:
K-Brite
$33.00
$31.50
$26.50
$23.00
$14.00
$12.00
$9.00
$8.50
K-Chrome
$51.00
$48.00
$44.50
$39.00
$22.00
$19.00
$16.00
$15.00
FEMALE
K-Brite K-Chrome
$42.00
$58.00
$38.50
$50.50
$33.00
$48.00
$29.50
$43.50
$20.50
$29.50
$16.50
$24.50
$11.00
$18.50
$9.50
$17.50
Add M for male and F for female
MM60 = 6.0” Male Mounting Plate
MF60 = 6.0” Female Mounting Plate
Storz Mounting Plates
Part #
Size
K-Brite
K-Chrome
MF407
4.0”
$19.00
$38.00
MF507
5.0”
$19.00
$38.00
ALL ITEMS ON THIS PAGE AVAILABLE IN COLORS & ENGRAVED!
Call for pricing
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
57
ELBOWS
KE-30 30º Elbow Rocker Lug Swivel Female to Male Threads
Size
1.5”
2.5”
3.0”
3.5”
4.0”
4.5”
5.0”
6.0”
K-Coat
$ 74.00
$ 74.00
$ 84.00
$ 94.50
$107.00
$138.50
$174.50
$197.00
Add $13.50 for Long Handle Swivels
K-Chrome
$104.00
$104.00
$114.00
$159.00
$136.50
$176.50
$222.50
$245.00
and specify on your order.
SKE - 30º Elbow Rocker Lug Swivel Female to Storz
FEMALE SWIVEL
4”, 5” and 6”
Storz with Locks
K-Coat Aluminum
S
T
O
R
Z
2.5”
3.0”
4.0”
5.0”
6.0”
2.5”
3.0”
3.5”
4.0”
4.5”
5.0”
6.0”
$ 58.50
$ 80.00
$102.00
$115.50
$140.50
$ 74.50
$ 90.50
$103.00
$121.50
$164.00
$ 111.00
$126.00
$174.50
$102.00
$123.00
$177.50
$118.00
$134.00
$188.00
$124.00
$131.50
$192.50
$129.00
$138.50
$196.50
Add $16.50 for Long Handle Swivels and specify on your order.
KEP - Suction Elbow Rocker
Lug Swivel Female to Male
Available 45º or 90º
K-Brite Aluminum
MALE
F
E
M
A
L
E
2.5”
3.0”
3.5”
4.0”
4.5”
5.0”
6.0”
2.5”
$101.00
$115.00
$122.00
$127.00
$144.50
$149.00
3.0”
$121.00
$121.50
$135.00
$152.00
$154.50
$163.50
3.5”
$112.00
$130.00
$130.50
$153.00
$156.50
$165.50
4.0”
$112.50
$126.00
$129.00
$145.00
$149.00
$174.00
$179.00
4.5”
$116.50
$124.50
$127.00
$144.50
$146.00
$178.50
$182.00
5.0”
$130.50
$136.00
$153.00
$166.00
$169.50
$181.50
$187.00
6.0”
$165.00
$171.50
$184.50
$196.00
Add $6.50 for Long Handle Swivels and specify on your order.
Add $12.50 for Petcocks and specify on your order.
Add $48.00 for 5” Storz (per side) and specify on your order.
Please specify 45º or 90º when ordering.
ALL ITEMS ON THIS PAGE AVAILABLE IN COLORS & ENGRAVED! Call for pricing
58
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
STRAINERS
Self Leveling Floating
Strainer
Low Level Strainer
• Increased flow rates due to high
intake ratio
• Maximum pump flows
• Lightweight design
• NEW compact design for easy
storage
• Available with Storz & Camlock
connections
• Includes Internal screen
• Shown with optional
external screen
• Drafts to within 2”
• Compact design
• Pivoting neck
• Jet Siphon included on 4” through 6”
• K-Coat for long life
Part #
Size
FBS60
FBS50
FBS45
FBS40
FBS30
FBS25
FBS15
6.0”
5.0”
4.5”
4.0”
3.0”
2.5”
1.5”
NST
-0
$447.50
$421.50
$413.00
$331.00
$199.00
$164.50
$119.50
Storz
-7
$499.50
$467.50
Camlock
-4
$433.50
$409.00
$344.00
$213.50
$180.00
$126.50
$276.00
$190.50
$157.00
$118.50
Part #
Size
LL60
LL50
LL45
LL40
LL30
LL25
6.0”
5.0”
4.5”
4.0”
3.0”
2.5”
NST
-0
$312.50
$263.50
$240.00
$237.00
$220.50
$205.00
Storz
-7
$373.50
$298.00
Camlock
-4
$302.50
$247.00
$260.50
$245.50
$226.00
$211.00
$202.00
$193.00
LLMB Mounting Bracket $51.00
Comes w/Internal Screen, Optional External Screen add $20.00
Ordering Example: LL60 = 6.0” NST
FSMB___ Mounting Bracket 4” thru 6” $51.00
Ordering Example: FS507 = 5.0” Storz
Box Strainer
Basement Strainer
• Ideal for streams
• Heavy Duty screen
• Two eye hooks on top
• K-Brite finish
Part #
Size
BX60
BX50
BX45
BX40
BX30
BX25
BX15
6.0”
5.0”
4.5”
4.0”
3.0”
2.5”
1.5”
NST
-0
$351.50
$330.00
$325.00
$315.50
$197.50
$193.00
$178.00
Storz
-7
$501.00
$381.00
Camlock
-4
$301.00
$284.50
$355.00
$204.50
$201.00
$268.00
$183.50
$179.00
$170.00
Part #
Size
BL40
BL30
BL25
4.0”
3.0”
2.5”
Ordering Example: BX500 = 5.0” NST
Barrel Strainer
•
•
•
•
Ideal for marine applications
Lightweight
Full flow
K-Brite or K-Chrome
NST
-0
$124.50
$104.50
$102.50
Storz
-7
$151.00
$125.00
$126.00
Camlock
-4
$104.50
$94.00
$88.50
Ordering Example: BL250 = 2.5” NST
Part #
Size
BS60
BS50
BS45
BS40
BS30
BS25
6.0”
5.0”
4.5”
4.0”
3.0”
2.5”
K-Brite
NST
-U
$88.50
$80.00
$73.00
$62.00
$52.50
$48.00
K-Chrome
NST
-C
$ 180.00
$ 164.00
$ 146.00
$125.00
$ 96.00
$ 94.00
K-Brite
Storz
-7
$162.50
$146.00
K-Brite
Camlock
-4
$117.00
$96.00
$ 115.00
$ 87.00
$ 80.00
$69.00
$59.50
$54.00
Ordering Example: BS60C = 6.0” Chrome NST
ALL ITEMS ON THIS PAGE AVAILABLE IN COLORS & ENGRAVED! Call for pricing
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
59
LDH APPLIANCES
5-WAY MANIFOLD
This manifold is light-weight and compact. It offers a simple way to feed
multiple small lines with one LDH line and continue with an LDH line. All
outlets are valved. A pressure gauge and relief valve are standard.
Weight: 51 lb. Length: 16¾” Width: 21½” Height: 13”
Description
Part Number
4” Storz Intake to (4) 2 1/2” NST
Male Rigid outlets and (1) 4”
Storz Gated Outlet.
51K0425
5” Storz Intake to (4) 2 1/2” NST
All Male Rigid outlets and (1) 5”
Storz Gated Outlet.
51K0525
$1275.00
SUPER FLOW 2-WAY BALL VALVE
This Super Flow 2-Way Ball valve is designed to feed multiple LDH lines with
a single LDH line. Relief valves are standard. Each outlet is provided with a
smooth operating ball valve to permit precise control of water flow.
Weight: 50 lb. Length: 16½” Width: 24¾” Height: 12”
Description
Part Number
4” Storz by (2) 4” Storz
23K0404
$1505.00
5” Storz by (2) 5” Storz
23K0505
$1397.00
INTAKE VALVE
W/CORROSION RESISTANT BRASS PISTON
This Piston Intake Relief is used as a truck inlet valve and incorporates a
quick connection, fast but controlled valve opening, air bleed-off and a relief
valve. The 45 degree inlet permits a smooth water flow. The 5” full flow
opening reduces friction loss.
Weight: 27 lb. Extension: 10½” Width: 8” Height: 17½”
Description
4” Storz to 4 1/2” NST Female Swivel
4” Storz to 5” NST Female Swivel
4” Storz to 6” NST Female Swivel
70K45104
70K50104
70K60104
$802.00
$802.00
$802.00
5” Storz to 4 1/2” NST Female Swivel
5” Storz to 5” NST Female Swivel
5” Storz to 6” NST Female Swivel
70K45105
70K50105
70K60105
$782.00
$782.00
$782.00
Special threads available, add $35 per end.
60
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
LDH APPLIANCES
GATE VALVE - AWGLS 25º ELBOW
This gate valve includes a 25º elbow, relief valve and an air bleeder. It is
designed for pumper use. Weight: 25 lbs. Length: 12” Width: 8” Height: 15”
Description
4” Storz to 4” NST Female Swivel
4” Storz to 4 1/2” NST Female Swivel
4” Storz to 5” NST Female Swivel
4” Storz to 6” NST Female Swivel
4” Storz to 4” Storz
5” Storz to 4” NST Female Swivel
5” Storz to 4 1/2” NST Female Swivel
5” Storz to 5” NST Female Swivel
5” Storz to 6” NST Female Swivel
5” Storz to 5” Storz
Part Number
10K40204
10K45204
10K50204
10K60204
10K0404
10K40205
10K45205
10K50205
10K60205
10K0505
$624.00
$624.00
$624.00
$640.00
$640.00
$624.00
$627.00
$627.00
$631.00
$640.00
GATE VALVE - 12K STRAIGHT
This gate valve includes an air bleed off and is designed for hydrant or pumper
use. Weight: 22 lbs. Length: 8 1/2” Width: 8” Height: 15”
Description
4” Storz to 4” NST Female Swivel
4” Storz to 4 1/2” NST Female Swivel
4” Storz to 5” NST Female Swivel
4” Storz to 6” NST Female Swivel
4” Storz to 4” Storz
5” Storz to 4” NST Female Swivel
5” Storz to 4 1/2” NST Female Swivel
5” Storz to 5” NST Female Swivel
5” Storz to 6” NST Female Swivel
5” Storz to 5” Storz
Part Number
12K40204
12K45204
12K50204
12K60204
12K0404
12K40205
12K45205
12K50205
12K60205
12K0505
$530.00
$530.00
$530.00
$530.00
$515.00
$564.00
$564.00
$564.00
$564.00
$638.00
BALL INTAKE VALVE - 55K with 30 Degree Intake Elbow
Designed for highest water-flow capability and lowest friction loss possible. This
valve is superior to all similar products available at the present time. Features
corrosion resistant, hardcoat anodized and powder coated aluminum.
•250 psi maximum operating pressure
•Hand wheel mounts on either side
•Adjustable relief valve from 50 to 250 psi
•Meets 900 psi hydrostatic test
•Meets NFPA requirements
•3/4” Air/water drain valve
4” Storz to 4 1/2” NST Female Swivel
4” Storz to 5” NST Female Swivel
4” Storz to 6” NST Female Swivel
55K45104
55K50104
55K60104
5” Storz to 4 1/2” NST Female Swivel
5” Storz to 5” NST Female Swivel
5” Storz to 6” NST Female Swivel
55K45105
55K50105
55K60105
Call for Pricing
To change the Storz to a threaded male or swivel female, add $35 .
For full time swivel on Storz connection, add $81.50
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
61
LDH APPLIANCES
2 WAY BALL VALVE - 21K
This 2-Way Ball Valve is designed to distribute water to or from one large diameter
supply line to two smaller supply or attack lines. Each outlet is provided with a
smooth operating ball valve to permit precise control of water flow.
Weight: 11.5 lb. Length: 10” Width: 9” Height: 8”
Description
4” Storz to
5” Storz to
4” Storz to
5” Storz to
(2) 2 1/2” NST Male Rigid
(2) 2 1/2” NST Male Rigid
(2) 3” NST Male Rigid
(2) 3” NST Male Rigid
Part Number
21K2504
21K2505
21K3004
21K3005
$285.00
$311.00
$333.00
$333.00
3 WAY BALL VALVE - 31K
This 3-Way Ball Valve is designed to distribute water to or from one large diameter
supply line to two smaller supply or attack lines. Each outlet is provided with a
smooth operating ball valve to permit precise control of water flow. The valve features an adjustable relief valve.
Weight: 21.5 lb. Length: 12.25” Width: 16” Height: 11”
Description
4” Storz to
5” Storz to
(3) 2 1/2” NST Male Rigid
(3) 2 1/2” NST Male Rigid
Part Number
31K0425
31K0525
$590.00
$577.00
LDH HYDRANT VALVE- 80K
The LDH Hydrant Valve is designed for use as both a hydrant booster and for inline
pumping in long relay evolutions. The valve has three modes; straight thru flow,
boosted flow and emergency shut off. The valve is connected to a hydrant or placed
inline for normal, straight flow. If pressure is low a second pumper can be attached
to boost pressure without interrupting flow. The pumper can be disconnected without
shutting down the flow.
Description
(3) 4” Storz to 4 1/2” NST Female Swivel
(3) 4” Storz to 5” NST Female Swivel
(3) 5” Storz to 4 1/2” NST Female Swivel
(3) 5” Storz to 5” NST Female Swivel
Part Number
80K04451
80K04501
80K05451
80K05501
$1028.00
$990.00
JUMBO SIAMESE - CLAPPERED - 50K
This Jumbo Siamese is designed specifically to supply one large diameter hose from
two large diameter hose lines. The Jumbo Siamese is designed with swing out
clappers for improved flow. The valve is ideal for rural water applications where two
pieces of apparatus are supplying one supply line from draft.
Description
4” Storz by
(2) 4” Storz
4” Storz by
(2) 5” Storz
5” Storz by
(2) 4” Storz
5” Storz by
(2) 5” Storz
Special threads available, add $35 per end.
62
Part Number
50K0404
50K0405
50K0504
50K0505
$754.00
All
Sizes
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
LDH APPLIANCES
2 WAY SIAMESE - CLAPPERED - 20K
This Siamese is designed specifically to supply one large diameter hose from
two hose lines. It is designed with swing out clappers for improved flow. The
Siamese is ideal for rural water applications where two pieces of apparatus are
supplying one line from draft.
Weight: 10 lbs. Length: 10 1/2” Width: 10” Height: 5”
Description
4” Storz to
5” Storz to
(2) 2 1/2” NST Female Swivel
(2) 2 1/2” NST Female Swivel
Part Number
20K0425
20K0525
$217.00
$224.00
3 WAY SIAMESE - CLAPPERED - 30K
This Siamese is designed specifically to supply one large diameter
hose from up to 3 hose lines. It is designed with swing out clappers
for improved flow. The Siamese is ideal for rural water applications
where 2 or 3 pieces of apparatus are supplying one line from draft.
Weight: 17 lbs. Length: 14 1/2” Width: 15” Height: 9”
Description
4” Storz to
5” Storz to
(3) 2 1/2” NST Female Swivel
(3) 2 1/2” NST Female Swivel
Part Number
30K0425
30K0525
$448.00
All
Sizes
HBV SMALL STRAIGHT HYDRANT BALL VALVE
Description
2 1/2” Male Outlet x 2 1/2” Threaded Inlet
Part Number
HBV25
$162.50
BUTTERFLY VALVE W/ BLEEDER - BFV
Description
Butterfly Valve w/ Lever Handle,
6" NST Female Swivel x 6" NST Male
Part Number
BFVL60160M
$714.00
*Other sizes available, please call for pricing
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
63
AKRON WYES, SIAMESE
1581 Leader Line Wye - Pyrolite®
2 1/2” Female inlet x (2) 1 1/2” male outlets
Self-Locking Tork-Lok® handles
$599.00
&
HYDRANTS
1573 Water Thief - Pyrolite®
1 - 2 1/2” Female inlet x (1) 2 1/2” and (2) 1 1/2” male outlets
$1275.00
Self-Locking Tork-Lok® handles
1581
1573
2581 Leader Line Wye - Pyrolite®)
2 1/2” Female inlet x (2) 1 1/2” male outlets
Rugged die caste handles
$336.00
1828 2 1/2” Hydrant Valve - Pyrolite®
2 1/2” Female inlet x 2 1/2” male outlet
Self-Locking Tork-Lok® handles
2285 2 1/2” Gate Valve - Pyrolite®
2 1/2” Female inlet x 2 1/2” male
outlet
$735.00
$502.00
1828
2285
2581
1582 Hydrant Wye - Pyrolite®
2 1/2” to 6” Female or 4” or 5” Storz Inlet x (2) 2 1/2” male outlets
Self-Locking Tork-Lok® handles
2583 3-Way Suction Siamese - Pyrolite®
(3) 2 1/2” Female inlets x 2 1/2” to 6” Female or Male or 4” or 5” Storz outlet
Self-Locking Tork-Lok® handles
2583
1582
2 1/2”F
3”F
3 1/2”F
$1,242.00
$1,330.00
$1,420.00
4”F or 4”Storz
4 1/2”F
5”F or 5”Storz
6”F
$1,455.00
$1,495.00
$1,611.00
$1,682.00
2 1/2”F or M
3”F or M
3 1/2”F or M
$1,975.00
$2,080.00
$2,167.00
4”F or M
$2,243.00
4 1/2”F or M $2,280.00
5”F or M
$2,398.00
6”F or M
$2,484.00
1583
2582
2582 3-Way Hydrant Wye - Pyrolite®
2 1/2” to 6” Female or 4” or 5” Storz Inlet x (3) 2 1/2” male outlets
Self-Locking Tork-Lok® handles
1583 Suction Siamese - Pyrolite®
2 1/2” to 6” Female or 4” or 5” Storz Outlet x (2) 2 1/2” female inlets
Self-Locking Tork-Lok® handles
2 1/2”F
3”F
3 1/2”F
4”F
2 1/2”F $1,258.00
3”F
$1,368.00
4”F
$1,493.00
64
$1,956.00
$2,041.00
$2,137.00
$2,199.00
4 1/2”F $2,239.00
5”F
$2,348.00
6”F
$2,438.00
4 1/2”F
5”F
6”F
$1,538.00
$1,656.00
$1,729.00
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
ELKHART WYES, SIAMESE
B-100A Elk-O-Lite® Ball Valved Wye
2 1/2” Female inlet x (2) 1 1/2” male outlets $247.00
Rugged, flexible molded urethane handles
&
HYDRANTS
BG-104A Elk-O-Lite® Water Thief
2 1/2” Female inlet x (2) 1 1/2” male outlets & (1) 2 1/2" male outlet
Positive twist lock handles $1071.00
B-100A
B-97A Elk-O-Lite® Ball Valved Wye
2 1/2” to 6” Female Inlet x (2) 2 1/2” male outlets
Positive twist lock handles
BG-104A
B-99A Elk-O-Lite® Ball Valved Siamese
(3) 2 1/2” Female inlets x 2 1/2” to 6” Female outlet
Positive twist lock handles
B-97A
B-99A
2 1/2”F
3F”
3 1/2F”
$1,068.00
$1,153.00
$1,233.00
4”F
4 1/2”F
5”F
6”F
$1,268.00
$1,304.00
$1,407.00
$1,483.00
B-95A Elk-O-Lite® Ball Valved Wye
2 1/2” to 6” Female x (3) 2 1/2” male outlets
Positive twist lock handles
2 1/2”F
3F”
3 1/2F”
$1,652.00
$1,736.00
$1,816.00
4”F
41/2”F
5”F
6”F
B-96A Elk-O-Lite® Ball Type Hydrant Valve
2 1/2” Female inlet x 2 1/2” male
Locking Handle
$660.00
4”F
4 1/2”F
5”F
6”F
$1,877.00
$1,911.00
$2,013.00
$2,085.00
B-98A Elk-O-Lite® Ball Valved Siamese
2 1/2” to 6” Female Inlet x (2) 2 1/2” female outlets
Positive twist lock handles
B-95A
2 1/2”F
3”F
3 1/2”F
$1,678.00
$1,771.00
$1,859.00
B-98A
$1,851.00
$1,888.00
$1,991.00
$2,066.00
2 1/2”F
3”F
3 1/2”F
$1,093.00
$1,185.00
$1,274.00
4”F
4 1/2”F
5”F
6”F
$1,292.00
$1,326.00
$1,428.00
$1,500.00
X-86A Elk-O-Lite® Gate Type Hydrant Valve
2 1/2” Female inlet x 2 1/2” male
$391.00
X-86A
B-96A
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
65
SUPERIOR DOUBLE JACKET HOSE
Superior Fire Hose Double Jacket, Rubber Lined, 100% Polyester, 800 Lb. Factory Test.
Superior Fire Hose produces a premium line of double jacketed hoses which are lightweight, flexible and tough.
Superior EPDM Liner: EPDM has excellent resistance to
ozone, heat and weathering. All liners are extruded in-house
where Superior’s quality control department assures thickness
and concentricity to the thousands of an inch. EPDM is specially formulated in conjunction with their adhesive blend to give
more than double the adhesion to the jacket than required by
NFPA.
White
Hose
Size
1 1/2”
1 3/4”
2”
2 1/2”
3”
Coupling
Size
1 1/2”
1 3/4” x 1 1/2”
2” x 1 1/2”
2 1/2”
3” x 2 1/2”
50’
Length
$76.50
$91.50
$147.50
$126.00
$175.00
Superior Steadfast Coating: An enviromentally safe coating that
enhances the hose with superior abrasion resistance and excellent
water repellency. Superior’s Steadfast Coating is formulated with
polymers and binders that are extremely elastic and do not take
away from the natural flexibility of the hose.
Steadfast
Appx.
Coating*
Wt
per 50’
50’
Uncoupled
Length
13.5
$86.00
15.5
$101.50
17.5
$158.50
24
$139.00
31
$192.00
Appx.
Appx.
Wt Alum Coil Dia.
50’
Couplings
16”
.92
16.5”
1.1
16.5”
2.0
17”
2.0
19”
3.5
*Steadfast coating available in Yellow, Red, Blue, Orange, Green, Tan, Black, Brown or White
**CUSTOM LENGTHS AVAILABLE - PLEASE CALL FOR PRICING
Price includes aluminum couplings NH (NST) or NPSH (IPT) thread, for other
threads add $7.50 to price shown. Freight is included on all NY Fire Dept. orders
of 1000’ or more of DJ hose, less than 1000’ or outside NY are FOB factory.
10 Year Factory Warranty
FORESTRY FIRE HOSE
Hose Construction Single Jacket 100% High Tenacity Polyester
Filament Jacket
Thermoplastic Lining Laminated to the jacket by the Patented Mertex®
Process which creates an exceptionally smooth waterway. 300 PSI
Service Test - meets or exceeds spec 5100-187fp
*All Hose will be Red
Sizes
1” x 50’
1” x 100’
1 1/2” x 50’
1 1/2” x 100’
MTF-187C
Red Color*
$77.00
$132.00
$92.00
$162.00
Price includes aluminum couplings NH (NST) FOB factory.
66
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
RUBBER COVERED HOSE
Hose Construction: Extruded Interlocking Matrix
Cover: 100% Synthetic Nitrile Rubber-Ribbed
Reinforcement: 100% Synthetic Fiber, Circular Woven
Liner: 100% Smooth, Synthetic Nitrile Rubber
Color: Yellow or Red
600 Lb. Factory Test
Hose
Size
1 1/2”
1 3/4”
2 1/2”
3”
Coupling
Size
1 1/2”
1 3/4” x 1 1/2”
2 1/2”
3” x 2 1/2”
Color
Red/Yellow
Red/Yellow
Red/Yellow
Red/Yellow
50’
Length
$123.50
$130.00
$201.00
$233.50
100’
Length
$231.00
$240.00
$374.00
$420.00
Freight free allowed to New York State on SuperFlow orders of $3000 or more,
Continental USA for LDH orders of $6000 or more.
May not be combined with any other type of hose shown on this page.
LARGE DIAMETER HOSE
Hose Construction: Extruded Interlocking Matrix
Cover: 100% Synthetic Nitrile Rubber-Ribbed
Reinforcement: 100% Synthetic Fiber, Circular Woven
Liner: 100% Smooth, Synthetic Nitrile Rubber
Color: Yellow or Red
Hose
Size
4”
5”
Sizes
4”
5”
Acceptance
Pressure
500
400
100’ Coupled
$452.00
$557.00
Couplings: Storz with locks
Annual Service
Weights
Test Pressure 100’ Coupled
250
78 lbs.
200
110 lbs.
50’ Coupled
$281.00
$342.00
25’ Coupled
$185.50
$222.00
Freight free allowed to New York State on orders of $3000 or more,
Continental USA for LDH orders of $6000 or more.
10 Year Factory Warranty
May not be combined with any other type of hose shown on this page.
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
67
PVC SUCTION HOSE
•
•
•
•
•
•
Low temperature PVC construction
Clear web for visual monitoring
Black ridged helix
High flexibility -40º to +150º F
Smooth bore for unrestricted flow
Special lengths available
Storz -7
Storz w/
Handles
-71
Camlock -4
Rocker Lug
-52
Long Handle
-51
Note: All PVC Suction Hoses are strictly drafting hoses and must not be used on Hydrants or in Pressure Applications.
NST THREAD
__51
__52
__7
__71
CAMLOCK
__4
Long Handle Rocker Lug
No Handle
Long Handle
Camlock
STORZ
Part#
Size
Length
2P60___
6.0”
10’
$354.00
$354.00
$491.00
$528.00
$361.00
2P50___
5.0”
10’
$300.00
$300.00
$359.00
$387.00
$277.00
2P45___
*4.5”
10’
$282.00
$282.00
2P40___
4.0”
10’
$205.00
$205.00
$274.00
$300.00
$177.00
P30___
3.0”
10’
$172.00
$129.00
P25___
**2.5”
10’
$117.00
$103.00
P15___
1.5”
10’
$ 53.00
Ordering Example: 2P6051 = 6" x 10' NST Long Handle Female to NST Rocker Lug Male
2P6052 = 6" x 10' NST Rocker Lug Female to NST Rocker Lug Male
*5.0” hose with 4.5” threaded coupling **3.0” hose with 2.5” threaded coupling
Other Lengths available upon request, please call for pricing.
68
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
HOSE ACCESSORIES
HS-150 The 100 and 50 Foot Hose Strap
$71.50
This strap securely holds 50’, 100’, or 150’ of 1 3/4” double jacketed
fire hose… the most commonly used attack hose in the fire service.
Ideal for cross lays, quick attack lines or standpipe operations. Strap
consists of two quick release Velcro closures, interconnected by a stiff
nylon spine, Hose remains organized and ready for rapid and easy
deployment. The Hose Strap enables a firefighter to grab a fold of
hose, shoulder it, and lay it out. Once at your point of attack, straps
can be opened and hose advanced. Designed for fire departments
that want to deploy an exact amount of 1 3/4” hose to the fire
scene or to the standpipe station.
GRP-57 Gripper Hose System
$124.00
Consists of three heavy duty nylon straps, with a padded shoulder
sling, all sewn together to create a hose harness. The shoulder sling
has Scotchlite bound edges. Comes complete with fiberglass reinforced cam buckles and torque rings that cinch up the bundle during
transport. Ideal for transporting hose assemblies to the fire ground or
up the stairs to a standpipe location.
Hose Rollers
For easy removal of air and water from hose. Simply walk the hose.
For use up to 5” LDH
Description
Two Man Hose Roller
One Man Style Hose Roller
Part Number
KHR2
KHR1
KHR2
$116.50
$132.50
KHR1
772 2 1/2” Hose Jacket
$603.00
Used for emergency repair of burst or leaky hose - or as an emergency adapter for the
connection of two hose lines with different threads in situations where pressures do not
exceed 150 psi. Fits all 2 1/2” hose from 2 3/4” to 3-5/16” O.D.
772
588 Hose Clamp
$456.00
For use on double-jacketed woven hose to 3”. Features rubber jaws and lock.
Lightweight for easier handling. Supplied with Style 589 Mounting Bracket.
588
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
69
AKRON TURBOJET NOZZLES
1” TURBOJET NOZZLES
1 1/2” TURBOJET NOZZLES
• 13-25-40-60 gpm (50-100-150-230 lpm)
• 1” swivel inlet
• Operates to 580 psi (40 bar)
• 30-60-95-125 gpm (115-230-360-475 lpm)
• 1 1/2” swivel inlet
1701
1” Turbojet Nozzle
1702
1” Turbojet Nozzle with
Pistol Grip
1715
1 1/2” Turbojet Nozzle
1716
1 1/2” Turbojet Breakapart
Nozzle
1717
1 1/2” Turbojet Tip with Twist
Shutoff
1718
1 1/2” Turbojet Breakapart
Nozzle with Pistol Grip
1715E 1 1/2” Electrical Turbojet Nozzle
1720E 1 1/2” Electrical Turbojet Nozzle
with Pistol Grip
• 95-125-150-200 gpm (360-475-550-750 lpm)
• 1 1/2” swivel inlet
1722
Mid-Range Turbojet Nozzle
1723
Mid-Range Turbojet Nozzle
with Pistol Grip
1724
Mid-Range Turbojet Tip with
Twist Shutoff
1734
Mid-Range Turbojet Breakapart
Nozzle
• Combination of Style 1717 tip
+ Style 2115 shutoff
1 1/2” ELECTRICAL TURBOJET NOZZLES
• Designed to be used on class “C” hazards
• No straight stream capabilities
• 30-60-95-125 gpm (115-230-360-475 lpm)
• 1 1/2” swivel inlet
MID-RANGE
TURBOJET NOZZLES
• Combination of Style 1724 tip
+ Style 2129 shutoff
• Combination of Style 1717 tip
+ Style 2116 shutoff
1720
1 1/2” Turbojet Nozzle with
Pistol Grip
1735
Mid-Range Turbojet Breakapart
Nozzle with Pistol Grip
• Combination of Style 1724 tip
+ Style 2127 shutoff
1737
Mid-Range Turbojet Tip
WIDE-RANGE
TURBOJET NOZZLE
Turbojet Nozzles
available with colored
handles & pistol grips
• 30-95-125-150-200 gpm (115-360-475-550-750 lpm)
• 1 1/2” swivel inlet
• 100 psi standard, 75 psi if specified
STYLE 1720
1”, 1 1/2”, MID-RANGE & WIDE RANGE
TURBOJET NOZZLES
STYLE
1701
1702
1715
1716
1717
1718
1720
1722
1723
1724
1734
1735
1737
1762
1763
1764
1765
1766
1767
70
LENGTH
8 1/8”
8 1/8”
9 1/8”
11 5/8”
6 7/8”
11 5/8”
9 1/8”
10 3/4”
10 3/4”
6”
9”
9”
6”
11”
11”
10 1/2”
10 1/2”
7 1/2”
7 1/2”
WEIGHT
LBS.
FLOW SETTINGS
GPM
2 1/2
3
3 1/2
3 3/4
2 1/4
4 1/8
4
6
6
4 1/2
6 1/4
6 5/8
4 1/2
5 3/8
5 3/4
5 1/4
5 9/16
3 1/2
3 1/2
13-25-40-60
13-25-40-60
30-60-95-125
30-60-95-125
30-60-95-125
30-60-95-125
30-60-95-125
95-125-150-200
95-125-150-200
95-125-150-200
95-125-150-200
95-125-150-200
95-125-150-200
30-95-125-150-200
30-95-125-150-200
30-95-125-150-200
30-95-125-150-200
30-95-125-150-200
30-95-125-150-200
$642.00
$696.00
$692.00
$776.00
$494.00
$829.00
$738.00
$840.00
$840.00
$553.00
$884.00
$912.00
$554.00
$755.00
$755.00
$851.00
$880.00
$520.00
$520.00
1762
Wide-Range Turbojet Nozzle
1763
Wide-Range Turbojet Nozzle
with Pistol Grip
1764
Wide-Range Turbojet
Breakapart Nozzle
• Combination of Style 1767 tip
+ Style 2129 shutoff
1765
Wide-Range Turbojet Breakapart
Nozzle with Pistol Grip
• Combination of Style 1767 tip
+ Style 2127 shutoff
1766
Wide-Range Turbojet Tip
1767
Wide-Range Turbojet Tip with
Twist Shutoff
STYLE 1762
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
AKRON TURBOJET NOZZLES
2 1/2” TURBOJET NOZZLES
• 125-150-200-250 gpm
(475-550-750-950 lpm)
STYLE 1725
STYLE 1723
The Akron® Turbojet Nozzle is unmatched in
today’s fire service for its flexibility and flow
control. The Turbojet is a constant gallonage
nozzle (flow remains the same in all patterns)
with multiple flow settings for operator flow
control. Use the Turbojet one time and it is
easy to see why it’s the “Nozzle of Choice by
Fire Fighters Worldwide.”
1725
2 1/2” Turbojet Nozzle
• 2 1/2” swivel inlet
1726
2 1/2” Turbojet Breakapart Nozzle
• 2 1/2” swivel inlet
• Combination of Style 1727 tip
+ Style 2125 shutoff
1727
2 1/2” Turbojet Tip with Twist Shutoff
1 1/2” swivel inlet
1728
2 1/2” Turbojet Breakapart Nozzle
1 1/2” swivel inlet
• Combination of Style 1727 tip
+ Style 2129 shutoff
1736
2 1/2” Turbojet Breakapart
Nozzle with Pistol Grip
• 2 1/2” swivel inlet
• Combination of Style 1727 tip
+ Style 2126 shutoff
1738
2 1/2” Turbojet Breakapart
Nozzle with Pistol Grip
1 1/2” swivel inlet
• Combination of Style 1727 tip
+ Style 2127 shutoff
1744
2 1/2” Turbojet Tip
1 1/2” swivel inlet
2730
2 1/2” Turbojet Tip with Axial Playpipe
• 2 1/2” swivel inlet
• Combination of Style 1727 tip
+ Style 2390 playpipe
Variable Pressure At Your Fingertips
• Operate at 100 PSI Standard Pressure - also operates
at Low Pressure without shutting down!
• Excellent flow performance - as low as 50 PSI!
• Easy operation at various pressures - even with wet
gloves
Unmatched Flexibility And Control!
• Dial control ring up for low pressure volume, dial
down for extended reach.
• Positive flow settings so you always know your flow
by using standard hydraulics.
2 1/2” TURBOJET NOZZLES
STYLE
1725
1726
1727
1728
1736
1738
1744
2730
LENGTH
9”
9”
6”
9”
10 3/4”
10 3/4”
6”
14”
WEIGHT
LBS.
6
7
4
6
7
6
4
1/4
1/8
1/2
1/4
3/4
5/8
1/2
10
FLOW SETTINGS
GPM
125-150-200-250
125-150-200-250
125-150-200-250
125-150-200-250
125-150-200-250
125-150-200-250
125-150-200-250
125-150-200-250
$904.00
$965.00
$554.00
$880.00
$992.00
$913.00
$562.00
$1,246.00
Total
Compliance To
NFPA 1964
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
71
AKRON ASSAULT NOZZLES
Akron® Assault Nozzles combine the quality stream
performance at a variety of pressures with the simplicity of a single gallonage nozzle to provide one of the
most versatile and easy-to-use nozzles in today’s fire
service.
So, if you were sold on the automatic concept but your
nozzles never quite performed the way you thought - look
no further! Make the Assault “Your Choice Behind the
Line of Fire.”
1 1/2” ASSAULT NOZZLES
4720
• SPECIFY PRESSURE AND FLOW, see pressure and flow
selection chart below
• 1 1/2” swivel inlet
1 1/2” Assault Nozzle with Pistol Grip and
Molded Teeth
4820
1 1/2” Assault Nozzle with Pistol
Grip and Spinning Teeth
4821
1 1/2” Assault Breakapart Nozzle with
Pistol Grip and Spinning Teeth
• Combination of Style 4817 tip
+Style 2127 shutoff
4714
1 1/2” Assault Tip with Molded Teeth
4814
1 1/2” Assault Tip with Spinning Teeth
4715
1 1/2” Assualt Nozzle with Molded Teeth
4815
1 1/2” Assault Nozzle with Spinning Teeth
4716
1 1/2” Assault Breakapart Nozzle with
Molded Teeth
• Combination of Style 4717 tip
+ Style 2115 shutoff
4816
1 1/2” Assault Breakapart Nozzle with
Spinning Teeth
• Combination of Style 4817 tip
+ Style 2115 shutoff
STYLE 4817
4717
4817
4718
4818
4819
STYLE 4820
1 1/2” Assault Tip with Twist Shutoff and
Molded Teeth
1 1/2” ASSAULT NOZZLES
PRESSURE & FLOW SELECTION CHART
1 1/2” Assault Tip with Twist Shutoff and
Spinning Teeth
SELECT PRESSURE
All Assaults set at
100 psi unless specified
1 1/2” Assault Breakapart Nozzle with Pistol
Grip and Molded Teeth
• Combination of Style 4717 tip +Style 2116 shutoff
1 1/2” Assault Breakapart Nozzle with Pistol
Grip and Spinning Teeth
• Combination of Style 4817 tip
+Style 2116 shutoff
50
75
100
125
72
150
184
212
237
95
@
75
125 150 175 60 95
@ @ @
@
@
75 75 75 100 100
GPM
78 102 122 143 42 67
95 125 150 175 52 82
110 144 173 202 60 95
123 161 193 226 67 106
GPM
* 60
75
95
†50
125
150
175
†Available only
at 150 gpm
* 200
1 1/2” ASSAULT NOZZLES
Style
1 1/2” ASSAULT NOZZLES FLOW CHART
150
@
50
PSI
100
*Available only
at 100 psi
1 1/2” Assault Breakapart Nozzle with
Spinning Teeth
• Combination of Style 4817 tip
+Style 2129 shutoff
NOZZLE
PSI
SELECT FLOW
125
@
100
150
@
100
175 200
@ @
100 100
88
108
125
140
106
130
150
168
124
152
175
196
141
173
200
224
4714
4715
4716
4717
4718
4720
4814
4815
4816
4817
4818
4819
4820
4821
Length
7”
9 1/2”
11”
7”
11 1/2”
9 1/2”
7”
9 1/2”
11”
7”
11 1/2”
11 3/8”
9 1/2”
11 3/8”
Weight
Lbs.
3
4
4
3
5
4
3
4
4
3
5
1/2
1/2
3/4
1/2
3/8
3/4
1/2
1/2
3/4
1/2
3/8
5
4 3/4
5 3/8
$410.00
$537.00
$706.00
$423.00
$759.00
$601.00
$406.00
$521.00
$689.00
$406.00
$742.00
$737.00
$579.00
$753.00
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
AKRON ASSAULT NOZZLES
The Assault nozzle provides all the
unique benefits of an automatic nozzle,
including:
• Control of the flow by the pump
operator
• Better stream performance over a wide
range of flows
• Simpler nozzle operation
The Assault Provides The Revolutionary
Solutions of Tomorrow
• Better stream performance at
pressures as low as 50 PSI
• Affordably priced
• Simplified nozzle training
• No recalibrfation required
• Lower maintenance due to simple,
durable design
4826
2 1/2” ASSAULT NOZZLES
• SPECIFY PRESSURE AND FLOW,
see pressure & flow
4827
selection chart below
4822
2 1/2” Assault Nozzle with
Spinning Teeth
• 1 1/2” swivel inlet
4823
2 1/2” Assault Nozzle with
Pistol Grip and Spinning Teeth
• 1 1/2” swivel inlet
4824
2 1/2” Assault Tip with
Spinning Teeth
• 1 1/2” swivel inlet
4825
2 1/2” Assault Nozzle with
Spinning Teeth
• 2 1/2” swivel inlet
STYLE
LENGTH
4822
4823
4824
4825
4826
4827
4830
4834
4835
4836
4837
4838
1 1/2”
11 1/2”
8 1/4”
12 1/8”
12 1/8”
8 3/4”
16 3/4”
13 1/2”
13 1/8”
14”
9 1/2”
13 5/8”
WEIGHT
LBS.
6 1/2 $669.00
7 1/4 $698.00
5 1/4 $506.00
7 1/8 $709.00
7 5/8 $767.00
5 7/8 $506.00
11 3/8 $1178.00
8
$865.00
7 5/8 $837.00
8 3/4 $944.00
6 1/2 $542.00
8 1/2 $917.00
2 1/2” Assault Tip with
Axial Playpipe
• 2 1/2” swivel inlet
• Combination of Style 4827 tip
+ Style 2390 playpipe
4834
2 1/2” Assault Breakapart
Nozzle with Pistol Grip
• 1/1/2” swivel inlet
• Combination of Style 4827 tip
+ Style 2127 shutoff
4835
2 1/2” Assault Breakapart
Nozzle
• 1 1/2” swivel inlet
• Combination Style 4827 tip
+ Style 2129 shutoff
4836
2 1/2” Assault Breakapart
Nozzle with Pistol Grip
• 2 1/2” swivel inlet
• Combination of Style 4827 tip
+ Style 2126 shutoff
4837
2 1/2” Assault Tip with
Twist Shutoff and
Spinning Teeth
• 2 1/2” swivel inlet
4838
2 1/2” Assault Breakapart
Nozzle
• 2 1/2” swivel inlet
• Combination of Style 4827 tip
+ Style 2125 shutoff
ADDITIONAL INFORMATION:
1 1/2” AND 2 1/2” Assaults meet
Insurance Services Office (ISO)
requirements.
2 1/2” ASSAULT NOZZLES
PRESSURE & FLOW SELECTION CHART
SELECT PRESSURE
All Assaults set at
100 psi unless specified
PSI
100
bar
7
kPa
700
SELECT FLOW
2 1/2” ASSAULT NOZZLE
FLOW CHART
GPM
200
75
5
500
250
†50
†3.45
†345
300
†Available only
at 250 gpm (950 lpm)
2 1/2” Assault Tip with
Twist Shutoff and
Spinning Teeth
• 1 1/2” swivel inlet
4830
STYLE 4825
2 1/2” ASSAULT NOZZLES
2 1/2” Assault Nozzle with
Pistol Grip and Spinning Teeth
• 2 1/2” swivel inlet
*350
LPM
250
750
@
NOZZLE
PSI
50
950
1140
*1325
*Available only
at 100 psi (7bar)
200 250 300
@
@
@
75
75
75
200 250 300 350
@
@
@
@
100 100 100 100
GPM
50
250
163 204 245
141 177 212 247
75
306
200 250 300
173 217 260 303
100
354
231 289 346
200 250 300 350
125
395
258 323 387
224 280 336 391
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
73
AKRON SABERJET NOZZLES
The SaberJet Nozzle from Akron is the
newest in firefighting technology.
The SaberJet is the first truly multipurpose nozzle with the penetration
of a solid bore tip and the advantages
of a fog pattern at the same time or
independently. The nozzle is capable
of operating efficiently at pressures
as low as 50 psi for reduced firefighter
fatigue, or up to 100 psi for maximum
flows. This versatile nozzle is well suited
for multiple applications: interior, exterior,
high rise attacks, CAFS systems, foam
applications, direct and indirect attacks,
cooling, penetration, protection, and
ventilation.
1522 SaberJet Nozzle (Dual Shutoff)
1532 SaberJet Nozzle (Single Shutoff)
$834.00
$815.00
1 1/2” swivel inlet
3/4”, 7/8”, 15/16” or 1” Tip orifice (Must specify)
Length: 11”, weight: 5 1/4 lbs.
If you are looking for a truly
multi-purpose nozzle, look no
further … SaberJet is your answer.
1523 SaberJet Nozzle w/Pistol Grip (Dual Shutoff) $834.00
1533 SaberJet Nozzle w/Pistol Grip(SingleShutoff) $815.00
1 1/2” swivel inlet
3/4”, 7/8”, 15/16” or 1” Tip orifice (Must specify)
Length: 11”, weight: 6 1/4 lbs.
1525 SaberJet Nozzle (Dual Shutoff)
1535 SaberJet Nozzle (Single Shutoff)
2 1/2” swivel inlet
3/4”, 7/8”, 15/16” or 1” Tip orifice (Must specify)
Length: 11 5/8”, weight: 6 lbs.
With Or Without
Pistol Grip
95 GPM9 Fog at 50 PSI,
135 GPM Fog at 100 PSI,
$909.00
$898.00
Pistol Grips and Handles
Plus Flush Capability
available in various colors! 1526 SaberJet Nozzle w/Pistol Grip (Dual Shutoff)
$909.00
1536 SaberJet Nozzle w/Pistol Grip(Single Shutoff) $898.00
2 1/2” swivel inlet
3/4”, 7/8”, 15/16” or 1” Tip orifice (Must specify)
Total
Compliance to
NFPA 1964
3/4”, 7/8”, 15/16” or 1”
Solid Bore Tip Options
Field Changeable
INLET SOLID
TIP PRESS. BORE
FLOW
SIZE (psi)
(GPM)
SOLID BORE REACH
EFFECTIVE
FEET
METERS
OVERALL
FEET METERS
Length: 11 5/8”, weight: 6 1/2 lbs.
*Dual shutoff versions can be used in solid bore
and fog stream simultaneously
COMBINATION FLOW (GPM)
STRAIGHT
STREAM
+ FOG = TOTAL
50
75
108
135
115
117
35
36
122
135
37
41
107
132
92
115
199
247
50
75
50
15/16”
75
50
1”
75
155
190
135
156
41
47
187
229
139
161
42
49
144
165
146
170
44
50
44
52
147
181
170
208
85
108
80
105
232
289
250
313
216
266
146
165
44
50
155
170
47
52
191
241
79
93
270
334
3/4”
7/8”
74
FOG
INLET
PRESSURE
FLOW
(GPM)
50
95
75
118
100
135
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
AKRON BLITZ TIPS
1445 Shutoff with Pistol Grip and Straight Tip
1 1/2” swivel inlet x 1 1/2” male
1 1/2” waterway with 1 3/8” orifice
Length: 10”, weight: 3 3/8 lbs.
Pyrolite shutoff with pistol grip and straight tip
for high volume low pressure application. The
Blitz Tips deliver nearly 400 GPM at 50 psi
pitot pressure.
$ 456.00
STYLE 1446
1446 Shutoff with Pistol Grip and Straight Tip
21/2” swivel inlet x 1 1/2” male
1 3/8” waterway with 1 3/8” orifice
Length: 10 5/8”, weight: 4 1/8 lbs.
$ 534.00
AKRON SABERTM SHUTOFF
Saber™ Shutoffs with Integral Tip
Lightweight ball shutoff with an integral straight bore tip.
Full 1-3/8” waterway. Pyrolite finish.Orifice options: 3/4”, 7/8”, 15/16”, 1” and 1 1/8”
1 1/2” Length: 5 7/8”
2 1/2” Length: 7 3/8”
2430 Saber Shutoff
1 1/2” swivel inlet x 1 1/2” male
2 1/4 lbs.
$ 349.00
2431 Saber Shutoff with Pistol Grip
1 1/2” swivel inlet x 1 1/2” male
3 lbs.
$ 377.00
2432 Saber Shutoff
2 1/2” swivel inlet x 1 1/2” male
2 1/4 lbs.
$ 444.00
STYLE 2431
2433 Saber Shutoff with Pistol Grip
2 1/2” swivel inlet x 1 1/2” male
3 1/2 lbs.
$ 468.00
AKRON SHUTOFF WITH DUAL STACKED TIPS
1440 Shutoff and Dual Stacked Tips
Shutoff with Dual Stacked Tips - Pyrolite
A lightweight ball shutoff with two tips for use where a fog
nozzle is not required. Minimum maintenance for longer and more
trouble- free operation. Base tip has a female thread on the
outlet for added protection and durability. Full 1-3/8” waterway.
15/16” and 1/2” Tips
1 1/2” swivel inlet
Length: 10 3/8”, weight: 2 1/2 lbs.
$ 497.00
1441 Shutoff with Pistol Grip and Dual Stacked Tips
15/16” and 1/2” Tips
1 1/2” swivel inlet
Length 3/8”, weight: 2 7/8 lbs.
$ 525.00
1442 Shutoff and Dual Stacked Tips
1 1/8” and 1/2” Tips
2 1/2” swivel inlet
Length: 11 1/2”, weight:3 3/8 lbs.
$ 577.00
STYLE 1440
1443 Shutoff with Pistol Grip and Dual Stacked Tips
1 1/8” and 1/2” Tips
2 1/2” swivel inlet
Length: 11 1/2”, weight:3 1/2 lbs.
$ 604.00
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
75
AKRON AVENGER NOZZLES
Avenger™ Nozzles
STYLE 1616, 1615, 4116 & 4115
The patent pending Avenger series of handline nozzles combine years of designing and
manufacturing experience with superior performance and dependability; all at an unbeatable
value. Available in selectable and fixed gallonage, the Avenger global platform offers great
stream quality and a simple design. Durable, reliable and affordable, the Avenger.
Styles 1616 and 1615, Avenger SG, is a selectable or constant gallonage nozzle (flow remains
the same in allpatterns) with various flow settings for frontline flow control. Styles 4116 and 4115,
Avenger FG, is a fixed or single gallonage nozzle offering a variety of pressures with the
simplicity of a fixed orifice.
Features:
• Lightweight fog and straight stream nozzle with multiple fixed or constant gallonage settings
• Great stream performance
• Raised lug on the bumper for easier pattern identification
• Multiple pattern detents
• Integrated control ring does not require you to flush the nozzle without shutting down
• Quick change pattern adjustment (90 degrees of rotation from Straight Stream to Full Fog)
• Easy to operate with simplified nozzle training
• NFPA Compliant
• Meets European CE Standard (Must Specify)
• 5 Year Warranty
1616
1615
4116
4115
1 1/2" Avenger™ Selectable Gallonage nozzle w/ pistol grip & spinning teeth
1 1/2" Avenger™ Selectable Gallonage nozzle w/ spinning teeth
1 1/2" Avenger™ Fixed Gallonage nozzle w/ pistol grip & spinning teeth
1 1/2" Avenger™ Fixed Gallonage nozzle w/ spinning teeth
$518.00
$518.00
$499.00
$499.00
Style 1616
Style
Description
Swivel Inlet
Length
1616
1615
4116
4115
1 1/2" Avenger SG nozzle w/ pistol grip & spinning teeth
1 1/2" Avenger SG nozzle w/ spinning teeth
1 1/2" Avenger FG nozzle w/ pistol grip & spinning teeth
1 1/2" Avenger FG nozzle w/ spinning teeth
1 1/2" or 2 1/2" (38 or 65 mm)
1 1/2" or 2 1/2" (38 or 65 mm)
1 1/2" or 2 1/2" (38 or 65 mm)
1 1/2" or 2 1/2" (38 or 65 mm)
10 1/2"
10 1/2"
10 1/2"
10 1/2"
76
Weight lbs.
Flow Setting
(kg)
GPM
LPM
4.3 (2 kg) 30-60-95-125-150
115-230-360-475-550
4.3 (2 kg) 30-60-95-125-150
115-230-360-475-550
4 (1.8 kg)
See Avenger FG Pressure and Flow
4 (1.8 kg)
charts below
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
AKRON SPECIALTY NOZZLES
Akron Zero Torque™ Nozzles
The Zero Torque (ZT) nozzle is the first nozzle specifically designed with ergonomics, handling, control and reduced firefighter
fatigue in mind. The ZT naturally keeps the nozzle out in front of the firefighter to allow for easier operation and provide better
control. In addition the pistol grip and inlet swivel are positioned to eliminate the reaction force torque found in all conventional
pistol gripdesigns. Conventional pistol grip nozzles are held at a position 3 1/2" to 4" below the center line of discharge, creating
a natural torque which must be resisted by the firefighter. The ZT is positioned to eliminate the torque, leaving only the straight
reaction force for the firefighter to resist.
The ZT is available on any 1 1/2", Mid-Range, Wide-Range, and 2 1/2" Turbojet, SaberJet, or Assault nozzle. It is also available
on Style 2125, 2129, 2430 and 2432 shutoffs with or without integrated stream shaper.
Superior Handling:
The ZT pistol grip and inlet swivel are positioned
to eliminate the reaction torque found in all
conventional designs providing reduced short-term
fatigue and better overall handling.
CALL FOR PRICING
1030 Akron Forestry Nozzle
Small lightweight nozzles designed for the rugged simplicity needed
for forestry/wildland applications.
Style 1030
A dual flow adjustable pattern nozzle with a simple twist operation allows
you to switch to the following settings:
• Off
• Low flow straight stream
• Low flow narrow fog
• High flow straight stream
• High flow fog
1030
1" Forestry Nozzle
Style
Inlet
Length
1030
1" (25mm)
4"(102mm)
$112.00
Weight lbs.
(kg)
1/2(.2kg)
Flow at 100 PSI
GPM
LPM
10-30
38-115
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
77
ELKHART CHIEF® NOZZLES
Features:
• Durable, Lightweight Elk-O-Lite® Construction
• Combination Fog and Straight Stream
• Constant/Single Gallonage
• Flow Efficient – Fully Machined Waterway
• Flush Feature
• Hydraulically Balanced Ball Shutoff
• Adjustable Neoprene Seat with Acetal Ball
• Heavy-Duty, Protective Urethane Bumper
• Rugged Aluminum/Bronze Shutoff Handle
with Double Stops
• Replaceable, Spinning Teeth for Wide,
Protective Fog
• Durable, Non-Slip Pistol Grip – Lexan Labeling
• Wide Range of Gallonages Available
• Gallonage Stamped on Stem Head
• Optional Low Pressure Gallonage on Some
Models*
• Optional Molded Urethane Teeth on Some Models
Benefits:
• Years of Dependable Service
• Excellent Stream Quality – Straight Stream
and Fog
• Ideal for Use with Foam Eductors
• Ease of Operation
• Same Gallonage – Straight Stream to Wide Fog
• Excellent for Use with AFFF and Class A Foam
• Easy Field Service
• Flush Without Shutting Down
• Excellent Wide Fog for Personal Protection
• Large Gallonage Selection
• Operate at Lower Pressures with Some Models*
• Easy to Work With – Easy to Train With
• Compliance with NFPA 1964*
4000-01 1.0" Chief
®
Nozzle (Not Shown)
30 GPM standard • 15, 45, 60 GPM optional • Tab handle
standard • Horseshoe handle optional • 1.0" rigid base •
Finish hard anodized.
4000-02 1.0" Chief
®
Nozzle (Not Shown)
30 GPM standard • 15, 45, 60 GPM optional • Tab handle
standard • Horseshoe handle optional • 1.0" free swivel base •
Finish hard anodized.
4000-03 1.0" Chief
®
Nozzle with Pistol Grip
30 GPM standard 15, 45, 60 GPM optional • Rugged, Elk-OLite pistol grip • Tab handle standard • Horseshoe handle
optional • 1.0" free swivel base • Finish hard
anodized.
4000-03
78
4000-10 1.5" Chief
®
Nozzle
95 GPM standard • 60, 125, and 150 GPM optional • Optional low pressure gallonages* available:
150 GPM @ 50 psi; 125 GPM @ 75 psi; and 150
GPM @ 75 psi • Horseshoe handle standard •
Tab handle optional • 1.5" swivel base • Finish
hard anodized.
4000-11 1.5" Chief
®
Nozzle (Not Shown)
Same as 4000-10 except with 1.5" rigid base.
4000-12 1.5" Chief
®
Nozzle (Not Shown)
Same as 4000-10 except with 1.5" free swivel
base.
4000-13 1.5" Chief
®
4000-10
Nozzle with Pistol Grip
95 GPM standard • 60, 125, and 150 GPM optional •
Rugged, Elk-O-Lite pistol grip • Optional low pressure gallonages* available: 150 GPM @ 50 psi; 125 GPM @ 75
psi; and 150 GPM @ 75 psi • Horseshoe handle
standard • Tab handle optional • 1.5" free swivel
base • Finish hard anodized.
4000-14 1.5" Chief
®
Nozzle Tip
Same as 4000-10 except tip only • No shutoff •
1.5" swivel base.
4000-15 1.5" Chief
(Not Shown)
®
Break-Apart Nozzle
Combination of 4000-14 and LB-275A
ball shutoff • 1.5" swivel base.
4000-18 1.5" Chief
Grip
®
4000-14
Break-Apart Nozzle with Pistol
Combination of 4000-14 and LB-275GA
ball shutoff • 1.5" free swivel base.
Optional Molded Urethane Teeth Now!
Molded urethane teeth are available, upon request, on all 4000-10
®
series Chief nozzles. This one piece molded urethane ring replaces
the spinning tooth ring and metal retainer ring that come as
standard.
4000-16 1.75" Chief
®
Nozzle
Similar to 4000-10 except with larger ball shutoff for greater flows • 150 GPM standard • Optional low pressure gallonages* available: 150 GPM @ 50 psi; 125 GPM @ 75
psi; 150 GPM @ 75 psi, and 175 GPM @ 75 psi •
Horseshoe handle standard • Tab handle optional • 1.5"
swivel base • Finish hard anodized.
4000-16
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
4000-18
ELKHART CHIEF® NOZZLES
4000-17 1.75" Chief
with Pistol Grip
®
4000-26 2.5" Chief
Nozzle
Same as 4000-16 except with rugged,
Elk-O-Lite pistol grip and 1.5" free swivel
base.
4000-17
®
4000-20 1.75", 2.0", or 2.5" Chief Nozzle
250 GPM standard • 175 and 325 GPM optional • Optional low
pressure gallonages* available: 250 GPM @ 50 psi; 185 GPM
@ 75 psi; 200 GPM @ 75 psi; 250 GPM @ 75 psi; and 300
GPM @ 75 psi • Horseshoe handle standard • Tab handle optional • 1.5" swivel base • Finish hard anodized.
4000-21 1.75", 2.0", or 2.5" Chief
Break-Apart Nozzle (Not Shown)
®
Nozzle
250 GPM standard • 175 and 325 GPM optional •
Optional low pressure gallonages* available: 250
GPM @ 50 psi; 185 GPM @ 75 psi; 200
GPM @ 75 psi; 250 GPM @ 75 psi; and 300
GPM @ 75 psi • Horseshoe handle standard • Tab
handle optional • 2.5" swivel base • Finish hard
anodized.
4000-27 2.5" Chief
®
4000-26
Playpipe Combination
Combination of 4000-24 with B-278-L playpipe •
2.5" free swivel base.
®
Combination of 4000-24 tip and B-275-GA ball shutoff •
1.5" free swivel base.
4000-22 1.75", 2.0", or 2.5" Chief
(Not Shown)
®
Nozzle Tip
4000-28 2.5" Chief
(Not Shown)
4000-20
®
Playpipe Combination
4000-27
Combination of 4000-24, B-275A ball shutoff,
and 279-LA playpipe • 2.5" rigid base.
Same as 4000-24 except with twist shutoff • 1.5" swivel base.
4000-23 1.75", 2.0", or 2.5" Chief
with Pistol Grip
®
4000-29 2.5" Chief
Nozzle
250 GPM standard • 175 and 325 GPM optional • Rugged,
Elk-O-Lite pistol grip • Optional low pressure gallonages*
available: 250 GPM @ 50 psi; 185 GPM @75 psi; 200
GPM @75 psi; 250 GPM @ 75 psi; and 300 GPM @ 75 psi
• Horseshoe handle standard • Tab
handle optional • 1.5" free swivel base •
Finish hard anodized.
4000-24 1.75", 2.0", or 2.5" Chief
Nozzle Tip
®
Same as 4000-20 except tip only
• No shutoff • 1.5" swivel base.
4000-23
4000-24
4000-25 1.75", 2.0", or 2.5" Chief
Nozzle (Not Shown)
®
Break-Apart
Combination of 4000-24 and B-275A ball shutoff
• 1.5" swivel base.
4000-31 1.75", 2.0", or 2.5" Chief
Nozzle
®
Break-Apart
Combination of 4000-22 tip and B-275-GAT ball shutoff
• 1.5" free swivel base.
4000-35 1.75", 2.0", or 2.5" Chief
(Not Shown)
Combination of 4000-22 tip
and B-275-AT ball shutoff
• 1.5" swivel base.
®
Break-Apart Nozzle
4000-31
®
Playpipe Combination
Combination of 4000-20 with 279-LA playpipe
• 2.5" rigid base.
4000-29
Threads Flows @ 100 psi
GPM
Length
Base Tip
Model
Hose
Size
4000-01
1.0”
1.0”
15, 30, 45 or 60
4000-02
1.0”
1.0”
4000-03
1.0”
1.0”
4000-10
1.5”
4000-11
Wt.
Lbs.
Price
8.00”
3.875
$473.00
15, 30, 45 or 60
8.375”
4.25
$473.00
15, 30, 45 or 60
8.375”
4.50
$506.00
1.5”
60, 95, 125 or 150
8.125”
4.375
$489.00
1.5”
1.5”
60, 95, 125 or
8.00”
4.25
$489.00
4000-12
1.5”
1.5”
15060, 95, 125 or
8.50”
4.375
$489.00
4000-13
1.5”
1.5”
15060, 95, 125 or
8.50”
4.625
$523.00
4000-14
1.5”
1.5”
15060, 95, 125 or
5.50”
1.875
$360.00
4000-15
1.5”
1.5” 1.5”
15060, 95, 125 or
9.00”
4.50
$656.00
4000-18
1.5”
1.5” 1.5”
15060, 95, 125 or
9.00”
5.00
$696.00
4000-16
1.75”
1.5”
150
9.625”
4.25
$553.00
4000-17
1.75”
1.5”
150
9.935”
4.813
$586.00
4000-20
1.75”, 2.0”, 2.5”
1.5”
150
9.625”
6.375
$561.00
4000-21
1.75”, 2.0”, 2.5”
1.5” 1.5”
175, 250 or 325
9.625”
6.75
$768.00
4000-22
1.75”, 2.0”, 2.5”
1.5”
175, 250 or 325
5.50”
4.125
$423.00
4000-23
1.75”, 2.0”, 2.5”
1.5”
175, 250 or 325
10.0”
6.625
$594.00
4000-24
1.75”, 2.0”, 2.5”
1.5”
175, 250 or 325
5.50”
4.125
$432.00
4000-25
1.75”, 2.0”, 2.5”
1.5” 1.5”
175, 250 or 325
10.125”
6.50
$768.00
4000-26
2.5”
2.5”
175, 250 or 325
13.50”
6.75
$612.00
4000-27
2.5”
2.5” 1.5”
175, 250 or 325
17.50”
4000-28
2.5”
2.5” 1.5”
175, 250 or 325
21.25”
4000-29
2.5”
2.5” 1.5”
175, 250 or 325
20.125” 11.625 $956.00
4000-31
1.75”, 2.0”, 2.5”
1.5” 1.5”
175, 250 or 325
10.375”
7.00
$772.00
4000-35
1.75”, 2.0”, 2.5”
1.5” 1.5”
175, 250 or 325
10.875”
7.25
$726.00
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
10.625 $1064.00
11.87
$646.00
79
ELKHART SELECT-O-MATIC® NOZZLES
80
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
ELKHART SELECT-O-MATIC® NOZZLES
Model
SM-3F
SM-3FG
SM-10F
SM-10FG
$598.00
$632.00
$616.00
$651.00
SM-20F
SM-20FG
TSM-20F
STSM-20F
STSM-20FG
$695.00
$729.00
$526.00
$833.00
$874.00
Model
*SM-30F**
*SM-30FG**
*TSM-30F**
*STSM-30F**
*STSM-30FG**
*DSM-30F**
*SM-30PL**
*STSM-30BPA**
*STSM-30PL**
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
$800.00
$835.00
$631.00
$938.00
$979.00
$874.00
$1231.00
$1331.00
$1368.00
81
AKRON APOLLO™
The Apollo™ family of portable monitors can get the job done when seconds count. Choose either a
Dual or Single Inlet Portable Monitor with an optional Direct Mount flange. All are available in either the
standard version or new Hi-Riser™.
The entire Apollo monitor family incorporates proven performance, more durability and better stability to
generate powerful streams and higher flows. These features and more make the Apollo the monitor of
choice by users who need more reliable performance.
•
Full 360° rotation in Deck mode - 180° rotation with built-in safety stops in Portable mode
•
Vertical travel approaching 90° above to 15° below horizontal with a built-in 35° safety stop
•
Full 3" waterway with built-in turning vanes in each elbow for maximum efficiency and lower friction loss No more than 10 psi at 800 gpm (.7 bar at 3030 lpm)
•
Multiple applications - Use as a Portable Monitor or add the Direct Mount flange for Deck Operation
•
Quality Locking System - Simple, heavy-duty dual lock pins for quicker and easier assembly and more positive locking
•
Direct Mount - A combination 3" NPT Female and 3" Flange allows for easy setup for Deck Operation
•
More water on the fire with a harder-hitting, low fallout straight stream
•
Sturdy ground base helps maintain stability
•
Ground Base folds for easy storage in a standard compartment
APOLLO SINGLE INLET MONITORS
Flows up to 1250 gpm (4800 lpm) in the deck mode
and 1000 gpm (3800 lpm) in the portable mode.
Choice of ground bases: 4”, 41 ¼ 2”, 5” female swivel, 4”
or 5” storz inlet (must specify) x 21 ¼ 2” threaded male
outlet
3416
3421
Apollo Single Inlet Portable and
Deck Monitor
3416
Shown with Style 5160 Akromatic® Nozzle
Includes a ground base, liftoff, and
direct mount
Nozzle and Tip Options for the Apollo Monitors
5160
3488
2499
1755
Inlet
4”, 4 1/2”, 5” F, 4” or 5” Storz
Outlet
Male
2 1/2”
Nozzle
5160
1755
Swivel Inlet
2 1/2” Female
2 1/2” Female
Length
9 1/2”
10”
Flow Range Weight lbs
250-1250
11 1/4
500-750-1000-1250
13
Tips
2499
Base Thread
2 1/2” Female
Middle
Thrd
2” NH
Top
Thrd
11/2”NH
Style
3416
Pipe
Size
3488
2 1/2” x 2 1/2”
GPM
1000
Length Wt. Lbs
10 1/2”
Deck Flow
GPM
1250
Orifices
Weight lbs
Liftoff Ground Base
23
38 1/2
13/8”, 11/2”, 13/4”, 2”
Construction
2 1/2' Pyrolite Alum.Chrome, CB
Deck
Height
15”2
Type of Nozzle
Automatic
Constant Flow
Length
16 7/8”
COMPLETE
$3,607.00
Less Pipe
& Tips
$2,878.00
$1,011.00
$1,094.00
Weight
lbs
2 7/8
$ 449.00
Brass
Pyrolite
Chrome
$330.00
$278.00
$392.00
Akron® Apollos meet Insurance Services Office (ISO) requirements (Deck Operation only).
82
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
AKRON MERCURY QUICK-ATTACK
MERCURY QUICK ATTACK MONITOR
The Mercury Monitors are the newest innovation in firefighting
equipment. These monitors are smaller than any other portable
ground monitor so it can be quickly set up and left unmanned at the
fire scene to free up valuable personnel.
• Compact Size & Weight Light - 14lbs without Nozzle
• Rated Flows Up To 500 GPM (1900 LPM)
• Elevation 30° to 60° unmanned, and down to 20° when manned
• Rotation ±20°
• Akron’s Ball Shut Off with Tork-Lok™ For Gating &
Monitor Repositioning
• Compact Folding Legs For Easy Storage in Crosslays
or Mounting Bracket Available
• Ergonomical Handle For Easy Mobility
• Reflective Band For Night Visibility
• Akro-Tec Coating For Added Durability
• Safety Strap & Hook Attached to Monitor to Eliminate
Misplacement
• 2 1/2" Inlet Thread Options Available with Full Time
Swivel
• 2 1/2" Outlet
Product Options:
- Storage Bracket
- Stacked Tips Style 2420
- Deluge Tip Style 489
- SaberMaster Nozzle 1545
- Mercury Nozzle Style 4445
3443
Shown with Style 4445 Nozzle
3443 Mercury Quick Attack Monitor
$1202.00 (monitor only)
Nozzle and Tip Options for the Mercury Monitors
489 - Aluminum
Mounting Bracket
$130.00
Style
3443
Nozzle
1545
4445
Tips
489
2420
Weight
14
Height
9"
Swivel Inlet
2 1/2” Female
2 1/2” Female
Base Thread
2 1/2” Female
2 1/2” Female
4445
1545
2420 - Pyrolite
Width
23 1⁄2"
Length
14 1⁄2"
7 1/4"
Inlet
2 1⁄2" F
2 1⁄2"or 3" Storz
Length
Flow
Orifice
10 7/16” 350GPM@80PSI 1 3/8"
7"
500GPM@100PSI
Std
Orifice
1 1/2"
1"x1 1/8"x1 1/4"
Outlet
2 1⁄2"
Weight lbs
8 1/2
5
Optional Orifices
1 1/4"", 1 3/8”, 1 3/4”, 2”, 2 1/4"
1"x1 1/4"x1 1/2"
Length
9”
9 5/8"
Flow GPM
500
$1202.00
Pattern Control
Manual
Manual
$ 751.00
$ 429.00
Weight
lbs
1
1 1/2
$ 257.00
$ 309.00
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
83
ELKHART
The Stinger®
The model 8297 portable monitor, the Stinger®, is one of today’s
most versatile master stream appliances. The unique design of
this monitor allows it to be easily removed from its portable base
and placed on a top mount adapter or top mount fixture for use
as a deck gun. The compact, folding base can then be stored
in a compartment or pre-connected in the hose bed for use as
a “Bomb” line. The Stinger® is truly a double-duty firefighter!
Features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Durable, Lightweight Elk-O-Lite® construction
Flow Efficient 3.0" Waterway
Fully Enclosed Worm Gear
Folding Legs on Portable Bases
Safety Stop at 35° Above Horizontal
Convenient Carrying Handle
Positive Horizontal Twist Lock
Grease Fitting for Ease of Lubrication
Liquid Filled Pressure Gauge
360° Horizontal Rotation (In Deck Mount Mode)
95° Vertical Travel (In Deck Mount Mode)
Locking, Free Swivel Storz Connectors
Six Portable Base Options
Two Deck Mount Options
282A Stream Shaper
ST-194 Triple Stacked Tips
10' Safety Chain
Benefits:
•
•
•
•
•
•
•
•
•
•
•
•
Years of Dependable Service
Two Guns in One/Deck or Portable
Minimal Friction Loss
Easy to Deploy by One Person
Stores Easily/Compartment or Tailboard
Pre-connect Base for “Bomb” Load
Supply with 2.5", 3.0", or LDH in Portable Mode
Safe Operation up to Maximum Flow Limits
Pre-pipe for Top Mount Installation
Supply Deck Mount with 1 or 2 Pony Lengths
Easy, Minimal Field Maintenance
Elkhart Quality
8297-10 Stinger® Upper Unit
Durable, lightweight Elk-O-Lite
construction • Can be deployed on
any of 6 portable bases • Can be
utilized on either of 2 top deck
mount fixtures • Carrying handle
doubles as quick release mechanism • Full 3.0" unobstructed
waterway for flow efficiency up to
1250 GPM • Handwheel driven,
vertical worm gear fully enclosed
for protection from the elements •
84
8297-10
(Rear)
Stinger®
MONITORS
Grease fitting for easy lubrication • Vertical travel from 70° above to 25°
below horizontal in deck mount mode • Safety stop at 35° above horizontal for portable mode • Full 360° travel in deck mount mode with positive
twist lock • Liquid filled pressure
gauge • Flow rated at: 1250 GPM
in deck mount mode; 1000 GPM
with single inlet portable base; and
800 GPM with the double 2.5" por8297-10 (Front)
table base • Standard with 282A
stream shaper and ST-194 quadstacked tips • Optional with any
master stream combination fog nozzle (see pages 15, 16, 17, & 35) •
Finish red acrylic/urethane enamel with hard anodized trim.
8297-25
Stinger®
Portable Monitor (2-2.5"
Swivels)
8297-25
8297-10 upper unit complete with portable base • For flows up to 800 GPM •
Two 2.5" clappered, female swivel inlets •
Base body constructed of durable,
lightweight Elk-O-Lite • Rugged, cast
Almag legs lock in place for deployment
and fold for compact storage • Furnished with 10'
safety chain • Finish red acrylic/ urethane enamel
with hard anodized trim.
8297-35 Stinger® Portable Monitor
(3.5" Swivel/Not Shown)
8297-10 upper unit complete with portable base • For flows up to 1000
GPM • One 3.5" female R/L free swivel inlet • Base body constructed of
durable, lightweight Elk-O-Lite • Rugged, cast Almag legs lock in place
for deployment and fold for compact storage • Furnished with 10' safety
chain • Finish red acrylic/urethane enamel with hard anodized trim.
8297-40
Stinger® Portable Monitor (4.0" Swivel)
8297-10 upper unit complete with
8297-40
portable base • For flows up to
w/ optional
SM-1000
1000 GPM • One 4.0" female R/L
free swivel inlet • Base body constructed of durable, lightweight
Elk-O-Lite • Rugged, cast Almag
legs lock in place for deployment
and fold for compact storage •
Furnished with 10' safety chain •
Finish red acrylic/urethane enamel with hard anodized trim.
8297-41 Stinger® Portable Monitor
(4.0" Storz/Not Shown)
8297-10 upper unit complete with portable base • For flows up to 1000
GPM • One 4.0" free swivel, locking Storz inlet • Base body constructed
of durable, lightweight Elk-O-Lite • Rugged, cast Almag legs lock in
place for deployment and fold for compact storage • Furnished with 10'
safety chain • Finish red acrylic/urethane enamel with hard anodized
trim.
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
ELKHART
Stinger®
8297-45 Stinger® Portable Monitor
(4.5" Swivel/Not Shown)
8297MB Storage Bracket for
8297-10 upper unit complete with portable base • For flows up
to 1000 GPM • One 4.5" female R/L free swivel inlet • Base
body constructed of durable, lightweight Elk-O-Lite • Rugged,
cast Almag legs lock in place for deployment and fold for compact storage • Furnished with 10' safety chain • Finish red
acrylic/urethane enamel with hard anodized trim.
8297-51
Stinger® Portable Monitor (5.0" Storz)
8297-10 upper unit complete with portable base • For flows up
to 1000 GPM • One 5.0" free
swivel, locking Storz inlet • Base
body constructed of durable,
lightweight Elk-O-Lite • Rugged,
cast Almag legs lock in place for
deployment and fold for compact
storage • Furnished with 10' safety chain • Finish red acrylic/ure8297-51
thane enamel with hard anodized
w/ optional CSW-L
trim.
8297-98
Stinger® Deck Gun
8297-10 upper unit complete with
8298 top mount adapter for deck gun
application • For flows up to 1250
GPM • Finish red acrylic/
urethane enamel with
8297-98 w/
hard anodized trim.
8297-99 Shown w/
optional SM-1000
Stinger®
8297MB
Stinger® Extras
One of these master stream, combination fog nozzles will augment the
fire suppression capabilities of the Stinger®. All three models offer
excellent straight steam quality, superb fog patterns, and are ideal for
use with AFFF.
CSW Select-O-Flow® Nozzle
Durable, lightweight Elk-O-Lite construction •
Constant flow/select gallonage: 300, 550,
and 750 GPM settings (1135, 2080, and
2840 L/min) • Excellent straight stream qualiCSW
ty • Pattern easily changed under flowing
conditions • Excellent for AFFF application •
Gallonage easily changed under flowing conditions (even down to
shutoff position) • 2.5" swivel base • Finish hard anodized with chrome
plated trim.
CSW-L
Durable, lightweight Elk-O-Lite construction with
stainless steel mechanism • Flows 300 to 1000 GPM
SM-1000
• Adjusts automatically to flow fluctuations to maintain
effective pressure and efficient steam • Pattern easily changed with
large trol ring • 2.5" swivel base • Finish hard anodized.
Model
8298F
Stinger®
Durable, lightweight Elk-O-Lite construction •
Bolts to top deck plate to allow 8297-10 to be
utilized as pre-connected deck gun • Two 2.5"
clappered swivel inlets • Keep one or both
connected to discharge outlets with pony
lengths of 2.5" or 3.0" hose • Finish red acrylic/urethane enamel hard anodized trim.
•Designed to hold “Stinger” portable base securely in
place when in storage • Finish cast Elk-O-Lite.
SM-1000 Select-O-Matic® Nozzle
Durable, lightweight Elk-O-Lite construction •
Allows 8297-10 to be utilized as a pre-plumbed
deck gun • Fits 3.0" -150# ANSI flat face flange •
Finish hard anodized.
8299 Deck Mount Fixture For
lightweight Elk-O-Lite with steel spring clips
Durable, lightweight Elk-O-Lite construction •
Constant flow/ select gallonage: 500, 750, 1000,
and 1250 GPM settings (1892, 2840, 3785, and
4730 L/min) • Excellent straight stream quality •
Pattern easily changed under flowing conditions •
Excellent for AFFF application • Gallonage easily
changed under flowing conditions (even down to
shutoff position) • 2.5" swivel base • Finish hard
anodized with chrome plated trim.
8297-99 Stinger®
Deck Gun
8298F Top Mount Adapter For
Stinger® Constructed of durable,
CSW-L Select-O-Flow® Nozzle
optional SM-1000
8297-10 upper unit complete with 8299
deck mount fixture for deck gun application
• For flows up to 1250 GPM • Finish red
acrylic/urethane enamel with hard anodized
trim.
MONITORS
8299
Inlet
*8297-10
Flow
GPM
Dimensions
Width Depth Height
Wt.
Lbs.
Price
15.00”
14.50
$1,829.00
15.00” 12.00”
*8297-25 (2) 2.5”F
800
23.00” 26.00” 16.25” 26.75
$2,822.00
*8297-35
3.5”F
1000
23.00” 26.00” 16.25” 29.00
$2,941.00
*8297-40
4”F
1000
23.00” 26.00” 16.25” 29.375
$2,941.00
*8297-41 4” Storz
1000
23.00” 26.00” 16.25” 28.875
$2,941.00
*8297-45
4.5”F
1000
23.00” 26.00” 16.00” 29.625
$2,941.00
*8297-51 5” Storz
1000
23.00” 26.00” 16.00” 30.75
$2,941.00
*8297-98 3” Flange
1250
15.00” 15.50” 13.75” 19.50
$2,068.00
*8297-99 (2) 2.5”F
1250
15.50” 17.00” 18.50” 22.50
$2,303.00
8298F
3” Flange
7.50”
7.50” 6.00”
5.00
$ 254.00
8299
(2) 2.5”F
9.50” 12.00” 10.75”
8.00
$ 503.00
*Price includes 282A Stream Shaper & ST-194 Quad Stacked Tips
*Deduction for less 282A
$159.00
*Deduction for less ST-194
$438.00
Additional
Options
CSW
$952.00
SM-1000$992.00
CSW-L
8297MB
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
$1019.00
$243.00
85
ELKHART FOAM EQUIPMENT
240-60, 95, 125
241-N
EDUCTORS
Part#
241-N
241-30
241-60
241-95
241-125
241-250
240-60
240-95
240-125
GPM
90
30
60
95
125
250
60
95
125
Brass
$360.00
---$529.00
$529.00
$529.00
$853.00
----------
Chrome
---$500.00
$555.00
$555.00
$555.00
$883.00
$1127.00
$1127.00
$1127.00
FOAM TUBES
Part#
244
246
247
$217.00
$217.00
$217.00
246 w/4000-10
86
247 w/SM-30FG
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
AKRON FOAM EQUIPMENT
Quick-Attack™ Foam Tubes
* Easily clamps onto the nozzle bumper
* Provides air-aspirated foam up to 14:1 expansion ratio
* For use on all Class A and B foams
Style
Nozzle
Compatibility
755
765
766
768
775
776
777
785
1” Assault™
Old-style 1 1/2” Turbojet
1” & 1 1/2” Turbojet
Mid-Range Turbojet
1 1/2” Marauder molded
1 1/2” Marauder spinning
1 1/2” Assault
Mid-Range Akromatic®
Nozzle
Bumper
Diameter
3”
3-3/8”
3-5/8”
4-1/2”
3-5/8”
3-3/4”
3-7/8”
4-1/4”
Foam Tube
$177.00
$256.00
$250.00
$252.00
$256.00
$272.00
$249.00
$271.00
Inline Eductors
Portable By-Pass Eductors
3060, 3095, 3125
3062, 3097, 3127
Style
Type
Inlet
Outlet
Flow
GPM
Length
Weight
LBS.
Material
3060
In-Line
1 1/2” or 2 1/2”
1 1/2”
60
7 3/4” ( 1 1/2” )
3 1/2
Pyrolite
$669.00
8 1/2” (2 1/2”)
3095
In-Line
1 1/2” or 2 1/2”
1 1/2”
95
same as 3060
3 1/2
Pyrolite
$642.00
3125
In-Line
1 1/2” or 2 1/2”
1 1/2”
125
same as 3060
3 1/2
Pyrolite
$672.00
3062
By-Pass
1 1/2” or 2 1/2”
1 1/2”
60
18”
20
Chrome
$1,364.00
3097
By-Pass
1 1/2” or 2 1/2”
1 1/2”
95
18”
20
Chrome
$1,376.00
3127
By-Pass
1 1/2” or 2 1/2”
1 1/2”
125
18”
20
Chrome
$1,398.00
Features of In-line and By-Pass Eductors shown above
*
*
*
*
*
*
*
*
Infinite number of settings between 0% and 6%
Performs well with 75 psi and 100 psi rated nozzles
Detents at 1/4%, 1/2%, 1%, 3% and 6%
Larger, easier to read metering dial with positive position stops
Rated flow calibrated at 200 psi inlet pressure
Pickup tube of reinforced clear PVC hose to help prevent kinking
Ideal for training without foam
Retrofit kits available for old style Akron Eductors
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
87
FOAM
FIREPOWER - Class A Foam
FIREPOWER is highly versatile and can be used with a wide range of equipment for different methods of application.
It is intended for use at 0.1% to 1.0% depending on the method of application:
1) Structural attack- conventional nozzles at 0.5-0.7% proportioning rate.
2) Wildland Ground attack- air aspirating nozzle at 0.3% proportioning rate, 0.1% rate for mop up.
3) Aerial attack- fixed or rotary wing delivery systems at 0.3% proportioning rate.
4) CAF system- compressed air foam systems at 0.1-0.5% proportioning rate.
Part Number
3170-0340-6
Grade
0.1% - 1%
Per Gallon
$14.70
5- Gallon Pail
$73.50
TRAINOL - Training Foam
Angus Trainol is a specially formulated mixture of synthetic materials which produces a high quality foaming agent for use with Liquefied Petroleum
Gas fire training simulators. LPG training simulators are becoming increasingly popular as fire professionals struggle to balance regulationsgoverning
air pollution and other environmental considerations, with the need to ensure personnel achieve an acceptable level of preparedness to enable them
to respond effectively in the event of a real fire incident. Angus Trainol meets these exacting requirements. Designed for proportioning at between 1%
and 3% depending on the foam generating equipment used. This low proportioning rate guarantees the most cost-effective solution for effective Class B
fire training programs. Also, when equipment permits, reduction in the proportioning rate below 3%, a corresponding directly-relational improvement in
environmental impact is achieved.
Warning: Trainol is designed for use exclusively as a training foam. Under no circumstances must Trainol be used to fight Class B flammable liquid
fires.
Part Number
3160-4340-6
Per Gallon
$10.80
5- Gallon Pail
$54.00
TRIDEX - Aqueous Film Forming Foams (AFFF)
Tridex is a cost-effective synthetic Aqueous Film-Forming Foam (AFFF) concentrate for extinguishing andsecuring flammable hydrocarbon liquid fires.
Tridex is a unique combination of hydrocarbon and fluorochemical surface active agents. It produces a vaporsealing aqueous film that spreads rapidly
over the fuel surface to provide rapid control and extinguishment.
• Film-forming for fast flame knockdown and extinguishment.
• Burnback resistance and post-fire security.
• Foam blanket reseals when ruptured by personnel or equipment.
Part Number
3133-7340-6
3136-1340-6
Grade
3%
6%
Per Gallon
$14.10
$10.50
5- Gallon Pail
$70.50
$52.50
TRIDEX - Alcohol-Resistant - Aqueous Film Forming Foam (AR-AFFF)
Tridex AR-AFFF is a cost-effective Alcohol-Resistant Aqueous Film-Forming Foam (AR-AFFF) concentrate for extinguishing and securing flammable
hydrocarbon and polar solvent liquid fires.
Tridex AR-AFFF is a unique combination of hydrocarbon and fluorocarbon surface active agents. It produces a vapor-sealing aqueous film that spreads
rapidly over hydrcarbon surfaces to provide rapid control and extinguishment. On polar solvents an insoluble polymer membrane is formed which
protects the foam blanket from the solvent.
• Highly versatile, eliminates the need to stock a variety of foam types.
• Film-forming on hydrocarbons for fast flame knockdown and extinguishment.
• Burnback resistance and post-fire security.
• Foam blanket reseals when ruptured by personnel or equipment.
Part Number
3130-0340-6
3130-1340-6
Grade
3%-6%
3%
Per Gallon
$13.20
$19.20
5- Gallon Pail
$66.00
$96.00
*Please see our website for spec sheets on all foam listed above.
*Please note: Shipping & Handling is additional
*1000 Gallons or more PPD/ALLD to Continental USA
88
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
FOL-DA-TANK WATER TANKS
Fol-Da-Tank Portable Collapsible Tank
Two people can unload Fol-Da-Tank from the truck and set up in
less than 30 seconds. Your choice of frames include a frame that
is resistance welded 14- gauge 7/8” steel tubing with a snag free
finish, or a frame fabricated of aluminum square tube, which is
26% lighter than steel. Both frames utilize die cut cadmium-plated hinges, solid brass grommets and heavy duty bolts.
Cap.
Gal.
600
1000
1500
2100
2500
3000
3500
4000
Open1
Dimensions
Length x Width
6’3” x 6’3”
8’3” x 8’3”
10’3” x 10’3”
11’3” x 11’3”
12’3” x 12’3”
13’3” x 13’3”
14’3” x 14’3”
15’3” x 15’3”
Aluminum
Steel
Model#
FDT-600
FDT-1000
FDT-1500
FDT-2100
FDT-2500
FDT-3000
FDT-3500
FDT-4000
Wt.
Lbs.
95
125
145
166
175
185
210
250
30 oz.
Vinyl2
$ 626
$ 763
$ 870
$1,002
$1,104
$1,209
$1,358
$1,512
22 oz.
HPR®3
$ 702
$ 895
$1,081
$1,207
$1,317
$1,517
$1,656
$1,812
Model#
FDT-600-ALUM
FDT-1000-ALUM
FDT-1500-ALUM
FDT-2100-ALUM
FDT-2500-ALUM
FDT-3000-ALUM
FDT-3500-ALUM
FDT-4000-ALUM
Wt.
Lbs.
70
95
110
125
130
135
155
185
30 oz.
Vinyl2
$ 837
$ 969
$1,175
$1,294
$1,358
$1,527
$1,634
$1,821
22 oz.
HPR®3
$ 934
$1,146
$1,355
$1,490
$1,617
$1,824
$1,886
$2,027
1Closed width for all models is 7”. Frame heights open or closed are as follows: Steel = 30”, Aluminum = 28-7/8”
2Color of 30 oz. vinyl is orange. 322 oz. HPR® is available in yellow or red, if you do not specify, we will ship yellow
*Other materials available, call for pricing
Fol-Da-Tank Self-Supporting Tank
One person can unload this Fol-Da-Tank from the truck.
These self-supporting frameless portable water tanks
have been designed to meet the most stringent requirements of rural/urban fire fighting. As the self-supporting
tank begins to fill with water, its unique design allows it
to become self-supporting automatically. Constructed
from heavy duty safety orange Vinyl (PVC) with all
seams welded for longer life. Includes 4 support rings
and a compact storage bag.
Supplied with one threaded flange coupling installed.
Your choice of 1 1/2” thru 6” NST or IPT male or female
(Please Specify).
Model#
SSTFD-500
SSTFD-1000
SSTFD-1500
SSTFD-2000
SSTFD-2500
SSTFD-3000
SSTFD-4000
SSTFD-5000
Capacity
Gal.
500
1000
1500
2000
2500
3000
4000
5000
Size
Open1
5’0” x 6’6”
7’3” x 8’10”
9’2” x 11’10”
10’0” x 12’5”
12’0” x 13’6”
13’0” x 14’9”
14’0” x 16’0”
17’0” x 19’0”
Approximate
Folded Dimensions
30” x 32”
32” x 32”
34” x 37”
34” x 37”
36” x 37”
36” x 37”
38” x 42”
40” x 42”
Weight
Lbs.
50
60
75
75
95
105
110
130
$550
$808
$889
$1,216
$1,370
$1,692
$1,962
$2,500
1All models have an open height of 32”
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
89
DRY HYDRANTS
Male Dry Hydrant Adapter
Male threads complete with suction strainer, snap ring and yellow polymer cap.
Adapter will glue into your PVC Elbow. You can purchase your PVC Elbows locally
when you purchase your pipe.
Part #
DHM60P
DHM50P
DHM45P
Size
PVC NST
6.0”
6.0”
6.0”
6.0”
5.0”
4.5”
$111.50
$106.50
$102.50
w/ Elbow*
$134.50
$129.50
$125.50
*If ordering w/ elbow, please specify 45º or 90º
Male Dry Hydrant Adapter
Male threads complete with suction strainer, snap ring and red aluminum cap.
Adapter will glue into your PVC Elbow. You can purchase your PVC Elbows locally
when you purchase your pipe.
Part #
DHM60A
DHM50A
DHM45A
Size
PVC NST
6.0”
6.0”
6.0”
6.0”
5.0”
4.5”
$123.00
$117.00
$112.50
Shown w/
Optional Elbow
w/ Elbow*
$146.00
$140.00
$135.50
*If ordering w/ elbow, please specify 45º or 90º
Female Dry Hydrant Adapter
Female threads complete with suction strainer, snap ring and red aluminum plug.
Adapter will glue into your PVC Elbow. You can purchase your PVC Elbows locally
when you purchase your pipe.
Part #
DHF60A
DHF50A
DHF45A
Size
PVC NST
6.0”
6.0”
6.0”
6.0”
5.0”
4.5”
$177.00
$170.00
$161.50
w/ Elbow*
$200.00
$193.00
$184.50
*If ordering w/ elbow, please specify 45º or 90º
DRY HYDRANT ACCESSORIES
Part #
PVCSF60
PVCS60
PVCS80
PVCSF80
DHBS80
DHLL60
TDS6
SSC60
SSC80
DHS
DHT6-001
90
Size
6.0”
6.0”
8.0”
8.0”
8.0”
6.0”
6.0”
6.0”
8.0”
12” x 18”
6.0”
Description
Horizontal PVC Strainer with Back Flushing Cover
Horizontal PVC Strainer with Fixed Cover
Horizontal PVC Strainer with Fixed Cover
Horizontal PVC Strainer with Back Flushing Cover
PVC Barrel Strainer
Dry Hydrant Low Level PVC Strainer
Shallow Water Strainer (Tear Drop Style)
Strainer Support Clamp
Strainer Support Clamp
Reflective Dry Hydrant Sign
Full Time In Line Swivel (allows 360º rotation of Dry Hydrant)
$ 97.00
$ 81.50
$130.00
$156.00
$161.50
$231.50
$265.50
$ 15.00
$ 25.00
$ 36.00
$ 98.00
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
CET FIRE PUMPS
VANGUARD POWERED HIGH
POWER VOLUME PUMP
This pump equipped with a Vanguard motor is
available with one (PFP-18hpVGD-1D) or two
delivery outlets (PFP-18hpVGD-2D), depending on
your needs. The engine and pump are mounted
on a steel protective frame with folding handles.
CET FIRE PUMPS VANGUARD 18 HP
PFP-18hpVGD-1D
$3990.00
PFP-18hpVGD-2D
$4450.00
PFP-18hpVGD-1D Shown
DESCRIPTION
• Air cooled 18hp Vanguard, OHV, V-Twin
• Centrifugal pump with brass impeller and aluminum casing.
• Mechanical seal and wear ring
• Stainless steel shaft pump
• 1 ½¨ discharge with ¼-turn ball valve
• 2 1/2¨ suction
• Compact (20¨x 23¨x 23¨ H)
• Weight : 165 lbs.
• Exhaust priming system up to 20 ft suction head
• One battery 12 volts
• 100 watt alternator
• Protective rack with 4 folding handles (option)
• Exhaust pipe guard
• Discharge pressure gauge.
• 6 gallons (22 l) detachable fuel tank. The fuel tank is made from plastic
• -1D has one 2 1/2" (65 mm) delivery outlet with 1/4-turn ball valve
• -2D has two 2 1/2" (65 mm) delivery outlets with 1/4-turn ball valve
• One 4" (100 mm) suction inlet
INCLUDED ACCESSORIES
• Swivel spotlight
• 36 watt alternator
• Pressure gauge
• Low oil alert
• 12 volt battery
The entire line of
CET PUMPS is available Visit our website or
call for details!
PERFORMANCE
250 GPM @ 50 PSI
150 GPM @ 100 PSI
100 GPM @ 150 PSI
25 GPM @ 200 PSI
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
91
FIRE EXTINGUISHERS
Croker
Part No.
4202
4002
4005
4004
4006
4007
4010
4009
4020
4019
4302
4305
4306
4310
4320
4405
4410
4415
4420
4204
4205
4207
4830
4131
4132
4135
4137
4139
BRACKETS
809 Vehicle Bracket
810 Vehicle Bracket
811 Vehicle Bracket
Size
Description
UL
Rating
CHIEF CROKER WATER
2.5 Gallon Water Pressurized (shipped empty)
2A
CHIEF CROKER ABC DRY CHEMICAL
2.5lb. with Nozzle & Vehicle Bracket
1A:10BC
5lb. with Hose & Horn, Alum. Valve
2A:10BC
5lb. with Hose & Horn, Brass Valve
2A:10BC
6lb. with Hose & Horn, Alum. Valve
3A:40BC
6lb. with Hose & Horn, Brass Valve
3A:40BC
10lb. with Hose & Horn, Alum. Valve
4A:60BC
10lb. with Hose & Horn, Brass Valve
4A:60BC
20lb. with Hose & Horn, Alum. Valve
20A:120BC
20lb. with Hose & Horn, Brass Valve
20A:120BC
CHIEF CROKER REGULAR DRY CHEMICAL
2.5lb. with Nozzle & Vehicle Bracket
10BC
5lb. with Hose & Horn, Alum. Valve
10BC
6lb. with Hose & Horn, Brass Valve
40BC
10lb. with Hose & Horn, Alum. Valve
60BC
20lb. with Hose & Horn, Alum. Valve
120BC
CHIEF CROKER CARBON DIOXIDE
5 lb. Aluminum with Swivel Horn
5BC
10lb. Aluminum with Hose & Horn
10BC
15lb. Aluminum with Hose & Horn
10BC
20lb. Aluminum with Hose & Horn
10BC
CHIEF CROKER SPECIAL PURPOSE
2.5Gallon FFP Foam PreMix (Alcohol Resistant)
3A:20BC
2.5
Gallon Water Mist
2A:C
6Liter Wet Chemical (for commercial kitchens)
2A:20BC:K
30lb. Sodium Chloride Dry Powder
(Class D)
CHIEF CROKER HALOTRON I
1.4lb. with Nozzle & Vehicle Bracket
1B:C
2.5lb. with Nozle & Vehicle Bracket
2B:C
5lb. with Nozzle & Vehicle Bracket
5B:C
11lb. with Hose & Horn, Brass Value
1A:10BC
15.5lb. with Hose & Horn, Brass Valve
2A:10BC
Wt.
lbs.
7.5
$90.40
5.5
10.25
9.25
12
13
17.75
16.75
38
39
$28.20
$37.20
$62.10
$56.10
$74.00
$58.00
$81.70
$105.20
$137.80
5.25
9.25
13
16.75
39
$30.70
$42.40
$61.80
$66.60
$108.70
14
28.25
37.75
50.75
$118.70
$169.50
$199.60
$243.80
11
9
12
55
$144.70
$146.00
$143.80
$321.00
3.75
5.75
9
23.5
28
$85.40
$80.50
$139.10
$294.00
$428.60
APPLICABLE EXTINGUISHER
4006, 4009, 4010, 4011, 4306, 4310, 4405 $34.00
4202, 4019, 4020, 4320, 4410, 4415, 4204 $35.80
4420 (20 lb. CO-2)
$46.50
All fire extinguishers except the models 4202 and 4204
will incur a hazardous material handling charge.
*Due to the volatility of metal prices, all prices are subject to change
92
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
ELECTRIC SMOKE VENTILATORS
12” MODEL P124 ELECTRIC
24” MODEL P244 ELECTRIC
ELECTRIC SMOKE EJECTORS
The P124 is designed for high powered air movement in a compact
sized fan. Turning at 3450 rpm, the
fan is small but mighty. Perfect for
the department that wants to eject
smoke and have a small unit for
confined space ventilation.
Smoke ejectors come complete with all of the features that make
Super Vac the most respected name in emergency ventilation. The
heart of these units is the patented, cast aluminum, 4 blade, recurve
propeller designed specifically for smoke ejection. Poured in Super
Vac’s foundry of the toughest aircraft alloys, the blade is the perfect
combination of a low noise, high output design. The power comes
from your choice of totally enclosed (S) or hazardous location (SE
or E) electric motors. All motors come with a factory approved two
year warranty and will run on 110 or 220 Volts. The rest of the fan is
covered by Super Vac’s five year warranty. The Super Vac smoke
ejector is a proven performer in the toughest situations. All Super
Vac smoke ejectors feature a square construction for strength and
stability. With handles on every corner, these units are easy to handle and can be stacked or hung using Super Vac accessories.
These units are designed to accept spiral or “L” ducting with Super
Vac adapters. The textured, chip resistant powder coating is baked
on for a finish that is as tough as the rest of the fan. All Super Vac
ejectors feature third party verified shroud airflow tested to AMCA
(Air Movement and Control Association) Standard 210-99. For the
ultimate in spark resistant construction, units with a hazardous location motor and optional aluminum housing are classified Type A
(highest degree of spark resistance) by AMCA 99-0401.
16” MODEL P164 ELECTRIC
The P244 is the largest smoke
ejector available. This fan will
quickly ventilate larger buildings
and residences. Perfect for the
department that has a mix of residential and mid-sized commercial
buildings in their response area.
Note: Requires a 20 amp circuit to
start and run.
16” HIGH SPEED HF164
The P164 is the most popular unit
in the fire/rescue service. It is the
perfect combination of high airflow
and easy to handle size. Perfect for
the department that wants a great,
all-around fan.
Combined with
the tilt frame, the
HF164 becomes
the most versatile
ventilation system
in the industry.
The HF164 is the most powerful
16” fan in the industry. It can easily
be used for both negative and positive pressure ventilation. Running at
3500 rpm, it has the power to force
or pull air deep into a structure or
underground vault. Perfect for the
department that wants a powerful
fan for negative, positive pressure,
or large confined space ventilation.
Note: Requires a 20 amp circuit to
start and run.
20” MODEL P200 ELECTRIC
MODEL# *MOTOR
P124S TEAO
P124SE HAZ
H.P.
1/2
1/2
P164S TEAO
P164SE HAZ
1/3
1/3
P200S TEAO
P200SE HAZ
1
1
P244S TEAO 1-1/2
P244SE HAZ 1-1/2
P164b
TEAO
1
HF164 TEAO 1-1/2
HF164E HAZ 1-1/2
START<WATTS>RUN HEIGHT, WIDTH, DEPTH
2000 800
15.5” x 15” x 13”
2000 800
15.5” x 15” x 13”
2000 700
2000 700
SHROUD<C.F.M.>VENTURI PRICE
2750
3700 $893.00
2750
3700 $1365.00
44#
49#
3200
3200
5200 $795.00
5200 $1268.00
4000 1500 25.5”x24.75”x16.25” 85#
4000 1500 25.5”x24.75”x16.25” 93#
6700
6700
9500 $1478.00
9500 $2115.00
6000 2100
6000 2100
-
-
6000 2100
6000 2100
19.25”x18.75”x13”
19.25”x18.75”x13”
WT.
40#
42#
28.5”x28”x18.75”
28.5”x28”x18.75”
110#
115#
8600
8600
10800 $1868.00
10800 $2655.00
13”x18.75”x19.25”
35#
3200
5400 $2625.00
19.5”x18.75”x16”
19.5”x18.75”x16”
44#
49#
4950
4950
9620 $1590.00
9620 $2048.00
*MOTOR INFORMATION: TEAO
TOTALLY ENCLOSED AIR OVER MOTOR
HAZ
EXPLOSION PROOF MOTOR FRAME CONSTRUCTION
MOTOR
ALSO AVAILABLE WITH 230/460 VOLT 3 PHASE MOTOR
NOTE: HAZARDOUS LOCATION MOTORS ARE U.L. RATED, BUT NOT THE ENTIRE FAN ASSEMBLY.
The P200 is capable of bigger ventilation tasks and higher airflows. Its
1 horsepower motor is the largest
available that will run off the standard 15 amp household circuit.
Perfect for the department that has
a mix of residential and commercial
buildings in their jurisdiction.
Combined with
the tilt frame, the
HF164 becomes
the most versatile ventilation
system in the
industry.
MODEL 164b
BATTERY POWER
The P164b combines the zero
emission airstream of a smoke
ejector, with the fast, no-generator
setup of a gas fan. The unit can run
60 minutes on a single bat. pac28
or the bat.pacs can be daisy
chained to extend operation. The
bat.pac28 is included and is compatible with other Super Vac bat.
fans.
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
93
POSITIVE PRESSURE
GAS POSITIVE PRESSURE VENTILATORS
Super Vac is the leader in airflow and compact fan design for
gasoline powered PPV’s. The heart of all these units is the
cast aluminum 7 blade airfoil propeller designed specifically
for use on PPV fans. Poured in Super Vac’s foundry of the
toughest aircraft alloys, the blade is the perfect combination
of a low noise, high output design. The power comes from
your choice of Honda (-H) or Briggs (-B) engines. These
engines come with a factory approved two year warranty. The
rest of the fan is covered by Super Vac’s five year warranty.
The direct drive system eliminates belts and pulleys for years
of trouble free operation. Super Vac PPV’s all feature a cart
style design with rear mounted pneumatic tires and a flip-up
or pull-up full height, full width handle for easy maneuverability. They feature the exclusive Super Vac lever action tilt, with
positions of 20º, 10º, 0º and -10º and a locking step brake to
make setup lightning fast. The textured chip resistant powder
coating is baked on for a finish that is as tough as the rest of
the fan. All Super Vac PPV’s feature third party verified airflow tested to AMCA 240-96 and can easily be used with
other Super Vac fans in the “V” attack configuration.
Pneumatic tires mounted
on the rear of all PPV’s
allow fans to easily move
over obstacles or up stairs.
MODEL# H.P. HEIGHT, WIDTH, DEPTH
718G4-B 6.0
18.75”X22.00”X20.75”
718G4-H 6.5
18.75”X22.00”X20.75”
94
18” MODEL 718G4
24” MODEL 724G4
The 718 is designed to compact
dimensions that fit the tightest
pumper compartments. They
feature the highest horsepower
in their class for maximum airflow. Perfect for the department
buying their first PPV or outfitting their entire fleet of engines.
The 724 features larger
engines and higher airflow than
other fans. These units are serious work horses to make quick
work of ventilating larger occupancies. Perfect for the department with a mixture of residential and mid-sized commercial
structures in their district.
20” MODEL 720G4
30” MODEL 730G4
The 720 is the perfect combination of small size and high
power. They also feature the
highest horsepower in their
class and the exclusive roll cage
frame design. Perfect for the
department with a mixture of
residential and small commercial
structures in their district.
Super Vac’s 730 is the largest
and most powerful, portable
PPV available. It is capable of
ventilating warehouses, highrise buildings, and large retail
outlets. Perfect for the department with larger commercial
and public structures in their
response area.
Step brakes easily lock
or unlock tires in
one motion.
WEIGHT
79#
82#
RPM
3770
3535
SET BACK ANGLE
8’
18º
6’
18º
CFM
15,350
15,590
PRICE
$1815
$2205
720G4-B
720G4-H
6.0
6.5
25.50” x 24.50” x 18.75”
25.50” x 24.50” x 18.75”
89#
92#
3385
3350
6’
6’
19º
19º
18,060
18,580
$1943
$2295
724G4-B
724G4-H
9
9
27.75” x 28.50” x 20.50”
27.75” x 28.50” x 20.50”
119#
133#
3245
3435
6’
8’
18º
18º
21,100
20,920
$2355
$2843
730G4-H
13
38.75” x 37.00” x 27.50”
163#
3220
10’
9º
26,730
$3570
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
POSITIVE PRESSURE
718VR3 VARIABLE SPEED
These models provide precise
control of the air movement and up
to 30% more airflow than single
speed electric PPV’s. The VR3
series features rheostat control of
speed function. Will operate on GFI
circuts
BATTERY POWERED
PPV MODEL 718b
bat.fan/bat.pac28
The 718b bat.fan is the perfect
solution for multiple use PPV. It
combines fast, no-generator setup
and high airflow with a zero emission airstream. The unit can run 20
minutes on a single bat.pac28, or
the bat. pacs can be daisy chained
to extend operation. The bat.pac28
is included and is compatible with
other Super Vac bat.fans.
18” MODEL 718E2
The 718 is designed to compact
dimensions that fit the tightest
pumper compartments. Options
include variable speed, hazardous
location, and standard duty electric
motors. Perfect for the department
buying their first electric PPV or
outfitting their entire fleet of
engines.
20” MODEL 720E2
The 720 is the perfect combination
of size and power. They also
feature the exclusive roll cage
frame design and are available with
hazardous location, standard duty
or variable speed electric motors.
Perfect for the department with a
mixture of residential and small
commercial structures in their
district.
POSITIVE PRESSURE VENTILATORS (ELECTRIC/WATER)
Super Vac is the leader in airflow and compact fan design for
Positive Pressure Ventilation. The heart of all these units is
the cast aluminum 7 blade airfoil propeller designed
specifically for use on PPV fans. Poured in Super Vac’s
foundry of the toughest aircraft alloys, the blade is the perfect
combination of a low noise, high output design. The power
comes from your choice of standard, variable speed or
hazardous location electric motors, the patented battery
powered unit, or the innovative water motor. These motors
come with a factory approved two year warranty. The rest of
the fan is covered by Super Vac’s five year warranty. The
direct drive system eliminates belts and pulleys for years of
trouble free operation. Super Vac PPV’s all feature a cart
style design with rear mounted pneumatic tires and a flip-up
or pull-up full height, full width handle for easy
maneuverability. They feature the exclusive Super Vac lever
action tilt, with positions of 20º, 10º, 0º and -10º and a locking
step brake to make setup lightning fast. The textured chip
resistant powder coating is baked on for a finish that is as
tough as the rest of the fan. All Super Vac PPV’s feature third
party verified airflow tested to AMCA 240-96 and can easily
be used with other Super Vac fans in the “V” attack
configuration.
Electric, battery, and water powered
fans allow clean air positive pressure
ventilation with no engine noise.
24” MODEL 724E2
WATER POWERED MODEL
724WT
The 724WT is a powerful water
driven fan for use in extreme
conditions. Powered by a
POK12HP water motor, the unit is
perfect for districts that include
large commercial operations that
may require the ventilation of
hazardous atmospheres.
Super Vac models have
handles that easily flip on
pull up to a comfortable
height. No stooping!
The 724 is much lighter and easier
to handle than the same sized gasoline powered PPV’s. Options
include standard duty, hazardous
location, and variable speed electric
motors. Perfect for the department
with a mixture of residential and
mid-sized commercial structures in
their district.
MODEL#
718E2
718EXP
718VR3
MOTOR
1Hp Std
1Hp Haz
1Hp Var
HEIGHT, WIDTH, DEPTH
20.75” x 22.00” x 18.75”
20.75” x 22.00” x 18.75”
20.75” x 22.00” x 18.75”
WEIGHT
86#
91#
85#
RPM
1750
1750
2400
SET BACK ANGLE CFM PRICE
6’
18º 8,140 $1853
6’
18º 8,140 $2123
6’
18º 10,720 $2235
720E2
720EXP
720VR3
1Hp Std
1Hp Haz
1Hp Var
25.50” x 24.50” x 18.75”
25.50” x 24.50” x 18.75”
25.50” x 24.50” x 18.75”
87#
92#
86#
1750
1750
2400
6’
6’
6’
18º
18º
18º
10,190 $1943
10,190 $2220
12,480 $2310
724E2
724EXP
724VR3
1Hp Std
1Hp Haz
1Hp Var
27.75” x 28.50” x 20.50”
27.75” x 28.50” x 20.50”
27.75” x 28.50” x 20.50”
102#
107#
109#
1750
1750
2100
6’
6’
6’
18º
18º
18º
13,320 $2145
13,320 $2393
15,980 $2498
718b
724WT
1HP DC
12Hp W
18.75”x22.00”x20.75”
21”x25.50”x28.50”
60#
88#
2400
3400
6’
8’
18º
18º
11,140 $3210
22,470 $5115
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
95
SUPER VAC ACCESSORIES
Shown with Door Bar and HR Hanger combination
Door Bar
Our Door Bar allows you to hang a Super
Vac with hangers, in any doorway at the
height you choose. It only weighs 13 pounds,
it’s extremely easy to install and it releases
instantly with a handy trigger. Door Bar
extends from 27” to 40”, an optional door bar
extender will add 20”.
Model
DB
Door Bar
$188.00
Model-HR- Hanger
These hangers allow you to put your Super
Vac almost anywhere; on doors, ladders,
windows, casements, archways etc. Used in
conjunction with the Door Bar, they permit
placing at any height. Please specify fan
number when ordering. Consists of two
hooks and webbed strapping.
Model
HR
(Specify fan model #)
Pair
$98.00
Running Board Mounts
For Gas Ventilators
These mounts provide a secure hold for the
protection of your equipment and personnel.
Please specify fan number when ordering.
Model
$135.00
RBM (Specify fan model #)
Shown with ”The Saddle” and Leg Bracket combination.
The Saddle Bracket
The Saddle is a combination door hanger and
coupling bracket made of lightweight and
durable cast aluminum. It can be used as a
bracket for hanging your Super Vac Ventilator
on a door. Also, by using two Saddles to
couple and stack three 16” Super Vacs along
with leg brackets for stabilization, you can
create positive pressure ventilation.
Mister Fan F164M
The Mister Fan brings you the ability to
provide your staff with a COOL BREEZE
under most any condition. The cooling
system hooks to a standard garden
hose connection and uses less than 2
gallons of water per hour. The housing
is aluminum and the unit features a
special rainproof GFI plug to eliminate
Model
SADDLE
shock hazards. A generator of at least
2000 watts is recommended to start and
run the unit.
Model
HP
Volts
F164M 1/3
115
$255.00
The Leg Brackets
The Leg Brackets allow the tilting and stacking
of two or three 16” Super Vac Ventilators. Made
of cast aluminum - set of two, 5 lbs.
Model
Pair
STACKLEG
$105.00
Running Board Mounts
For Square Ventilators
These mounts provide a secure hold for the
protection of your equipment and personnel.
Please specify fan number when ordering.
Model
RBM - (Specify fan model #)
$98.00
Amps
5.8
Dimensions
13”x18.75”x19.75”
Weight
41#
Output
3200 Shroud
5200 Venturi
$1013.00
GP164S 16” Square Gas Fan
Factory ready to accept duct on input
or output side.
Model
HP
Cycle
GP164S 3
2
Dimensions
13”x19.5”x20””
Weight CFM
47#
4200 Shroud
5600 Venturi
$1500.00
Cloud 9 Smoke Machine by Super Vac.
The Super Vac Cloud 9 Smoke Machine includes everything you need to get started. The only additional item you
need to purchase is extra oil based smoke fluid. The included gas cylinder is shipped empty. You can have it refilled
at any local shop that services fire extinguishers.
Price includes the following:
• Roll cage frame, pneumatic tires and tilt-up handle
• Remote control with 50' extension
• Gas regulator
• Gas hose, 16"
• 5 lb. CO2 cylinder (shipped empty)
• .60 gallon oil base fluid (enough for 1 tank full)
96
Model Number
S-975 Cloud 9 Smoker complete, 115 VAC $4538.00
S-900 (6) x 0.6 gallon bottles oil based fluid $263.00
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
Figure 2
Figure 1
DUCTS, ADAPTERS & ACCESSORIES
Spiral Duct (with storage bag)
This is the highest quality duct made, with
heavy duty wear strips and two-ply
construction, ideal for moving large quantities
of air into hard to reach places. Available with
an adapter as shown (AD). Extension pieces
also available without adapter (BC1). Spiral
duct may be used on the intake or discharge
side of fan. Fan shown not included.
Extended
Dia.
Length
Duct with Adapters
Model
12x20AD
16x20AD
20x20AD
24x20AD
12”
16”
20”
24”
20’
20’
20’
20’
12”
16”
20”
24”
20’
20’
20’
20”
Model
Dia.
LD 12-3X8 12”
LD16-3X8 16”
Hor.
Leg
3’
3’
Vert.
Leg
8’
8’
$323.00
$338.00
Tilt Frame For 12” and 16”
Ventilators
The bracket easily retrofits onto your
existing 12” & 16” Super Vac to allow
tilting in any direction. From straight up
for blowing into an attic access hole, to
straight down for blowing into a man
hole... this bracket allows you to quickly
set up your fans. Can be ordered with
new fans or as a kit to easily retrofit to
existing fans.
Model
TF124
TF164
Fan Size
12”
$473.00
16”
$510.00
$713.00
$833.00
$1080.00
$1350.00
Duct Extensions
12x20BC1
16x20BC1
20x20BC1
24x20BC1
Translucent ”L” Duct
The “L” duct is an extremely useful duct that
is held open by air pressure from the fan. It
folds up to take very little space when not in
use. Once deployed, men and equipment
can pass by easily in cramped spaces by
simply collapsing the duct. (Figure 1) shown
attached to an adapter that clips easily onto a
fan. Light is able to pass thru the reinforced
translucent vinyl. (Figure 2) shown strapped
inside the duct allows the vertical leg to be
shortened to form a 90 degree bend.
$585.00
$743.00
$960.00
$1200.00
Fan Covers
Vinyl fan covers available in red or yellow.
Specify fan model number and color of cover
when ordering
12” thru 24” (Specify fan model)
30” (730G4-H)
$135.00
$188.00
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
97
SAWS
PARTNER® K-12 FD Rescue Saw Package
K12FDPKG
$1535.00
The "Package" Model is equipped with the following:
• NIGHT EYE - A bright LED light that provides illumination on a
smokey roof or while cutting a roof at night.
• CARRY SLING - A heavy duty, adjustable shoulder carry strap with
reflective stripe.
• CARBIDE TIP BLADE - Your choice of a 24-tip (12-inch) or 30-tip
(14-inch) wood cutting carbide tip blade.
• FLASHING LIGHT - A red LED flasher mounted to the top of the saw
to help locate on a smokey roof.
PARTNER® FD-760
K-760-14"x30T
$1105.00
K-760-12"x24T
$1090.00
The PARTNER® FD-760 is the replacement for the old K650. It is
offered with a 14" guard and a 12" guard. The FD760 12" is ideal for
forcible entry.
It is also great for roof cutting due to its unique power source and the
use of CHOPPER blades. This saw consists of five horsepower and
weighs less than 20-pounds. This light weight saw is a perfect choice
for any Fire Department operation.
PARTNER® FD-970
K-970-12"x24T
1385.00
The K-970 is the replacement of the old K-960, K-950, and K-1200
with added horse power 6 HP. Includes a 12" x 24tip carbide blade.
Features: When you work with a Partner, you have all the benefits of
the latest technology in your grasp.
With the K970 Active, they have combined 40 years of experience with
the latest advances, while always focusing on user ergonomics, safety
and reliability.
Super Vac Rescue Saws
SV3-16
16”
SV3-20
20”
$2040.00
$2078.00
• Shindaiwa 757 rugged power head
• Output / Speed - 15.6 Hp / 13,000 rpm
• Self cleaning Carbide Chisel Chain, .404 Dual Raker
• Depth Gauge - Full Safety Cover, quick adjust/removal
• Air Filter - 128 square inches / covered and protected
• Sprocket Nose - High Alloy, 8 rivet nose
The Super Vac Rescue Saws: Combining rugged construction, smooth
performance and raw power, the lightweight Super V3 Power Pro is
the perfect solution for your rescue saw needs. Designed for maximum
versatility, (roof operations, to rapid intervention teams, to clearing
fallen trees and cutting shoring) the Super V3 will have your
department ready for the next call. Comes complete with a full safety
cover/depth gauge, a carbide chisel chain, skrench tool and a powerful
Shindaiwa 757 engine. The Super V3 is always ready to roll!
98
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
WRENCHES & HOLDERS
K49-3
KS34
K45-3
K48-3
K48-3
K45-3
K49-3
KS34
Triple Holder Set,
Triple Holder Set,
Triple Holder Set,
Storz Holder Set,
(1) K07 Hydrant Wrench & (2) 7113 Universal Spanners
(1) K05 Hydrant Wrench (Double) & (2) 7113 Universal Spanners
(1) K08 Storz Hydrant Wrench & (2) 7113 Universal Spanners
(4) KS3 Storz Spanner Wrenches
$71.00
$76.00
$83.50
$63.50
K46-2
Double Holder Set
Complete with (2) 7113 Universal
Spanner Wrenches
$42.50
K07
Adjustable Hydrant Wrench (Single)
For pentagon heads up to 1 3/4” and
square 1 1/4” - Single hook spanner head
fits 3/4” to 6” rocker lug or pin lug fittings
$22.00
K05
Adjustable Hydrant Wrench (Double)
For pentagon heads up to 1 7/8” and
square 1 1/2” - Double hook spanner head
fits 3/4” to 6” rocker lug or pin lug fittings
-Replaceable jaw (Not Shown)
$27.50
K08
Adjustable Storz Hydrant Wrench
For pentagon heads up to 1-3/4” and
square 1-1/2” - Storz spanner combination
fits 4” to 6” storz; plus 3/4” to 6” rocker
lug and pin lug fitting
$34.50
KS3
Storz Spanner Wrench
One end fits 4” thru 5” Storz, other end is
a universal spanner.
$14.00
Universal Spanner Wrench
Fits 3/4” to 3” rocker or pin lug.
$9.50
7113
(A-2019)
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
99
FORCIBLE ENTRY TOOLS & AXES
Akron Tri-Bar
Manufactured as a single piece drop forged bar made of heat treated alloy
steel.
• Multiple uses: Pry, twist, puncture, strike, gain purchase point, gas meter
shutoff, vehicle extrication, vertical ventilation
• Drop forged from alloy steel
• Heat treated for added strength
• Built-in roof ring and shoulder strap ring
• Weight: 30" 10 lbs, 36" 11 lbs.
• Made in USA
Part #
TRI-30
TRI-36
TRI-36
Length
30”
$186.00
36”
$202.00
Firehooks Pro Bar, 30"
Dropped forged, one piece construction
Part #
PB-30
Length
30”
$212.50
PB-30
Firehooks Dynamic Trio
Includes:
8 lb Force Axe
Pro-Bar 30"
Marrying Strap
Part #
DT-3
$300.00
DT-3
8 LB. Force Axes
The ultimate tool for forcible entry, perfectly balanced to lay correctly in
the hands for that short strike zone on an iron or unlimited padlock
breaker. Large, oversized head makes the strike zone more accurate
and easy to hit. Cutting edge annealed to keep its edge longer.
FA-8
FAP-8
Super strong handle with a rigid fiberglass core surrounded by durable
shock absorbing foam. A combination that eliminates the need for hand
grips and prevents splintering and breaking on overstrike. Safety color
yellow is luminous in smoke and or poor light situations. A sanded knurl
is embossed in the lower part of the handle
Part #
FA-8
FAP-8
8lb. Flat
8lb. Pick
Fiberglass
Fiberglass
Head
6 lb. Flat
6 lb. Pick
6 lb. Flat
6 lb. Pick
Handle
Wood
Wood
Fiberglass
Fiberglass
$95.00
$99.50
Axes
Part #
A2001/WA-6
A2002/WAP-6
A2003/FA-6
A2004/FAP-6
A2001
$45.00
$50.00
$50.00
$55.00
A2002
100
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
AKRON ROOF HOOKS
Akron Roof Hooks
The Akron Roof Hook is designed to perform reliably through the toughest use
and abuse seen in today’s firefighting. It is designed with the highest grade
materials for a long lasting, durable, and maintenance free tool. This all around
tool can be used for forced entry, prying open roof scuttles, and sky lights,
sounding floors and roofs, venting windows, probing for extension, pulling ceiling,
opening walls, and much more. Add an optional shoulder strap and hands are left
free for climbing ladders.
• Multipurpose head and chisel foot are on standard ARH tool
• Hollow steel shaft
• Industrial quality abrasive grips shipped loose for personalized placement
• Powder-coated finish for unparalleled corrosion resistance
• High quality adjustable shoulder strap available
ARH-36
ARH-36S-FC
ARH-48
ARH-72
36" Roof Hook w/ multipurpose hook and chisel
36" Roof Hook w/ strap & fulcrum chisel
48" Roof Hook w/ multipurpose hook and chisel
72" Roof Hook w/ multipurpose hook and chisel
$59.00
$79.00
$67.00
$82.00
*More configurations available, however the models shown are stock items.
ARH-36
ARH-36S
FLAMEFIGHTER TOOL KITS
Flamefighter Tool Kits
These Roof and Salvage Kits are excellent for
fire apparatus with limited space.
BP Roof Kit
1- 3' Pike Head
1- 3' Trash Hook
1- 3' D Handle
1- 4' extension pole
$201.00
BP Salvage Kit
$348.00
1- 3' Dry Wall Hook
1- Squeegee
1- Square Nose Shovel
1- Push Broom
2- 4' extension handles w/ Rubber Grip
1- 4' extension pole
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
101
FIRE HOOKS PIKE POLES
National Hook Fiberglass Ash Core
Part #
NHF-4’
NHF-5’
NHF-6’
NHF-8’
NHF-32”W/D
NHF-40”W/D
Length
4’
5’
6’
8’
32”
40”
$
$
$
$
$
$
54.00
58.00
62.00
74.00
65.00 *
65.00 *
Compare this model with economy in
mind, for an excellent value.
New Yorker Fiberglass Ash Core Super
Part #
NYFG-4’
NYFG-5’
NYFG-6’
NYFG-8 ’
NYFG-32”W/D
NYFG-40”W/D
Length
4’
5’
6’
8’
32”
40”
$
$
$
$
$
$
74.00
78.00
82.00
90.00
82.00 *
82.00 *
New York Roof Hook - Steel Shaft
Part #
RH-4’
RH-6’
RH-8’
Length
4’
6’
8’
This is one of the best poles available,
featuring: Yellow Fiberglass Pole, ram
knob, Celtex grips and Malleable Iron
Head.
“These poles are for departments that
demand the Best”.
Developed by the New York City Fire
Department's R&D department. Features
an all purpose head, aircraft steel shaft,
chisel end, and Celtex grips. The chisel
end is used as a prying tool for scuttle
hatches and roof doors. The short lengths
are for going up fire escapes and scuttles
to the roof.
$ 78.00
$ 90.00
$103.00
Many other lengths and configurations available, call for pricing
FLAMEFIGHTER PIKE POLES
Flamefighter Pike Pole
Part #
PP3
PP4
PP6
PP8
PP3D
PP4D
Length
3’
4’
6’
8’
3'
4'
$
$
$
$
$
$
34.00
36.00
42.00
48.00
42.00 *
45.00 *
All Pike Poles have a round fiberglass
handle with a plastic core for added
stability, maximum strength, and minimum
weight. The outside diameter of the
handle is 1-1/4".
Flamefighter Trash Hook
Part #
TH4D
TH6D
TH8D
Length
4’
6’
8’
$ 59.00 *
$ 66.00 *
$ 72.00 *
The standard pole with a Trash Hook and
“D” style handle. The handle is held on
with two spring pins and epoxy.
Flamefighter Dry Wall Hook
Part #
DWH3D
DWH4D
DWH6D
DWH8D
Length
3’
4’
6’
8’
$
$
$
$
56.00
62.00
67.00
74.00
*
*
*
*
The head of the drywall hook is fabricated
from 3/16" plate steel parts that are formed
and then welded into a solid structure,
which results in a stronger and lighter
head.
*Includes "D" Handle
Many other lengths and configurations available, call for pricing
102
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
FIRE HOOKS TOOLS
Hydra-Ram
The Hydra-Ram is the first and only one piece integrated hydraulic forcible entry tool.
The Hydra-Ram has a maximum thrust opening of 4 inches. There are no hoses or
auxiliary pumps to leak or trip on. The Hydra-Ram is truly a one man operation,
since the whole unit is in the hands of the user.
The Hydra-Ram weighs only 11 lbs. and is only 13 inches long. Great for the narcotics officer, it can be carried under the coat like a weapon.
No need to worry about maintenance or leaking fluids. The Hydra-Ram uses aircraft
seals of triplex quality. The hydraulic fluid is non-flammable, non-toxic and nonfreezing. The jaws are made of special stainless steel of 220,000 tensile strength.
10,000 lbs. of force is acquired at 138 lbs. pressure at the handle. While other units
may take 30 to 40 strokes on the pump to gain full extension, the Hydra-Ram does it
in 8 strokes. The Hydra-Ram can be used in any position, even upside down
without any effect on its operation.
The Hydra-Ram II is the same as the Hydra-Ram except it has a maximum thrust
opening of 6 inches, weighs 13 lbs. and is 15 inches long. The Hydra-Ram units
includes a mallet and heavy duty Cordura bag.
Model Number
HR-1
HR-2
Length
4" thrust opening
6" thrust opening
$1680.00
$1920.00
"The Original" CAN HARNESS
The latest in extinguisher can harnesses. Held in place by (2) 3 inch Velcro straps
and a safety strap with a "D" ring, which goes through a hanging bracket on the can.
The can may then be carried either horizontally (shown below) or vertically, which ever
you prefer. Can be used on all extinguishers. It can also be used with the 2.2 size
SCBA bottles for easy carrying. Excellent on cans with plastic bottoms.
CH-312
$37.50
K-Tool Kit
A tool designed (by a FDNY Fire Lieutenant & licensed locksmith) to pull all types of
lock cylinders (rim or mortise) from the various glass type or solid doors. The K-Tool
Kit consists of K-Tool, Operation Manual, Set of Key Tools, Shove Knife & Leather
Pouch
KTK $131.50
R-Tool Kit
A tool designed to pull all types of lock cylinders too large for the K-Tool unit
(above), such as locks that extend out from the door and 1-inch round are easily
pulled with the R-Tool. The R-Tool Kit consists of R-Tool, Set of lock tool keys,
Carrying bag & Shove knife
RTK $181.50
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
103
SCENE LIGHTING
Akron SceneStar™ LED Scene Light
ELSS-SLDC - 14,000 Lumens
ELSS-XLDC - 19,000 Lumens
ELSS-XLAC - 20,000 Lumens (120VAC or 240VAC)
The new LED High Power Scene Light has been engineered to
provide industry leading levels of light output with consistency
and reliability. SceneStar LED scene lights will continue to
provide overall illumination even at elevated operating
temperatures through optimized thermal management.
Solid-state electronics ensure a lifetime of peak performance.
• Streamlined aesthetics in a compact design
• No ultraviolet light to attract insects during nighttime operation
• Standard color is white; black optional
(note: handles and heat sink always black)
• 6 year warranty
• Serviceable construction (Sustainable LED technology)
• CE and UL® ratings pending
• Available now in 10-32V DC & 120V/240V AC
Mounting Options:
• Tripod
• Pole
• Portable
• Recessed (SLDC Only)
• Brow
• Fixed
Portable
Ground Base
*See our website
or call for pricing
Tripod Base
Pull-Up
Push-Up
Cord Reels
Generator Lights
Akron Extenda-Pod
• Includes light head as selected below
• Standard tripods extend up to 11' from ground
• Stowed height of 6'
• Can be mounted on apparatus with optional Pod-Bracket set
• 120V models come standard with a one foot pigtail and L5-15 twist lock plug
• 240V models come standard with a one foot pigtail and L6-20 twist lock plug
• 500 and 600 watt models are UL Listed and come standard with heavy duty, chrome plated
wire-guard
• Dual Head models available
• Two shorter sizes are available upon request with stowed heights of 55" or 43"
E-500-POD Extenda-Pod with 500W Head
E-1000/120V-POD Extenda-Pod with 1000W Head
$576.00
$630.00
E-1000-POD
104
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
HONDA GENERATOR LIGHTS
Honda Generator Lights
Extenda-Lite's Generator Lights are designed for Fire Departments, Rescue Squads, Emergency
Services, Contractors and Homeowners who demand superior lighting in all situations. Good lighting
at any fire, rescue, accident, work scene or home is truly a time and life saving tool. All Extenda-Lite
products are built using quality materials, so they will be totally dependable when needed.
SOMETIMES MORE IS BETTER:
• More Power - 1000 watts & 2000 watts max 900 watts & 1600 watts cont.
• More Versatility - Either generator size will accept any of Extenda-Lite's light heads
up to its rated power capacity
• More Mobility - It goes where power cords can't
• More Efficient - Better utilization of time
• More Running Time - With Honda's Eco throttle on, the generator automatically
throttles down when light is turned off
• More Safety - AC/DC circuit breakers & USDA qualified spark arrester for muffler
are standard
• More Light - Perfect for inside structures where fixed lighting will not reach
HG-500i
SOMETIMES LESS IS BETTER:
•
•
•
•
Less Weight - Almost 1/2 the weight of previous models.
Less Space - Light head folds down for storage
Less Time - To get light & power to scene at the same time
Less Vehicles - Don't have to tie up fire apparatus just for lighting. Get trucks back
into service and use generator for investigations.
• Less Noise - Honda's new EU series generators run super quiet
If you demand excellence, quality & visibility, then Extenda-Lites on the Honda EU series generators
is the right choice for you. Simultaneous AC/DC use is great for fire or accident scene investigations.
With Honda's EU2000i generator you will have enough power for light and still be able to run battery
chargers for cameras or radios.
HG-4750i
HG-ELSS-XLAC
HG2-1500i
Model Number
HG-500i
Description
500 Watt Stonco Light Head Kit and EU1000i Honda Generator
Price
$1482.00
HG-4500i
500 Watt Beta 4000 Light Head Kit and EU1000i Honda Generator
$1555.00
HG-4750i
750 Watt Beta 4000 Light Head Kit and EU1000i Honda Generator
$1578.00
HG2-1500i
1500 Watt Stonco Light Head Kit and EU2000i Honda Generator
$1978.00
HG-ELSS-XLAC
SceneStar LED 20000 Lumen Light Head and EU1000i Generator
$2362.00
HG2-ELSS-XLAC
SceneStar LED 20000 Lumen Light Head and Honda EU2000i Generator
$2794.00
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
105
PORTABLE HAND LIGHTS
Streamlight® Fire Vulcan® LED... Rechargeable LED Lantern
C4 LED Technology, 2 ultra-bright blue tail light LED's.
Fire Vulcan® LED Standard System
Includes 120V AC, 12V DC chargers, shoulder strap and charging rack.
44450 Orange $157.00
Fire Vulcan® LED Vehicle Mount System
Includes truck mountable 12 volt DC direct wire charging rack and shoulder strap.
44451 Orange $151.00
Fire Vulcan® LED
Streamlight® Survivor® LED... One of the brightest, right-angle LED flashlights in the world!
A lightweight, right-angle flashlight designed to clip on to turn-out gear for easy, hands-free use. Super-bright, narrow beam penetrates
smoke, fog and mist for improved visibility.
• C4® LED, shock-proof with a 50,000 hour lifetime.
• Unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel. O-ring sealed.
• 4 Modes: High: 36,000 Candela peak beam intensity, 140 Lumens, 4 hour runtime
Low: 12,000 Candela peak beam intensity, 47 Lumens, 15 hour runtime
Flash: 8 hour runtime
Moonlight: 20 day runtime
Survivor®LED
90503
90500
90540
90541
90545
Steady Charge AC/DC Orange $114.00
Light Only (Nicad) Orange
$79.50
$53.00
Light Only (Alkaline) Orange
Light Only (Alkaline) Yellow
$53.00
$53.00
Light Only (Alkaline) Black
Streamlight® Knucklehead® LED... Features an articulating head and magnet!
Knucklehead® with Clip LED Flashlight
• Shockproof dual C4® premium LED technology delivers 200 lumens
• Durable spring-loaded clip (only on clip model) for easy attachment to turnout gear and uneven surfaces
• Features a 210 degree articulating head that rotates a full 360 degrees
90657
90651
90644
90642
Steady Charge AC/DC Orange w/ Clip $139.00
Light Only (Nicad) Orange w/ Clip
$104.00
$76.00
Light Only (Alkaline) Orange w/ Clip
$76.00
Light Only (Alkaline) Yellow
Knucklehead® LED
Streamlight PolyTac 90™ LED... Compact Right-Angle Light!
PolyTac 90™ LED
Versatile right angle compact tactical flashlight C4 LED technology, impervious to shock with a 50,000 hour lifetime.
88834
88831
88830
88832
Orange $46.50
Yellow $46.50
Black $46.50 (May be extended lead time)
Orange w/ Gear Keeper $57.50
PolyTac 90™ LED
Streamlight Vantage™ LED... Helmet-Mounted Tactical Light!
Vantage™ LED Helmet Light
C4 premium LED technology, impervious to shock with a 50,000 hour lifetime. Ultra-bright blue tail light LED with a 100,000 hour lifetime.
69140 Black $109.00
Vantage™ LED
106
*Visit our website for many additional Streamlight® products.
We have access to the entire Streamlight Product LIne!
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
HAZARDOUS MATERIALS
SPILFYTER® No Decision Response Universal Sorbents
for Hazardous Materials
Dikes - Socks
Dikes-Socks are ideal for containing and absorbing
hazardous liquids. Their moldable shape easily conforms
to fit around equipment, drums, tanks and walkways.
Part# Qty/Case Size
S2-30 15
3” x 4'
S2-37 6
3” x 10'
$62.00
$62.00
Pillows
Universal Sorbent Pillows are the easy to handle solution
for the cleanup of hazardous liquids. Pillows are highly
absorbent, picking up many times their weight in hazardous liquids. They are especially good for working in confined spaces such as sumps, catch basins and
settling ponds.
Part# Qty/Case
Size
S2-66 10
8 1/2” x 17”
$58.50
Pads - Sheets
Universal Sorbent Pads - Sheets will absorb
hazardous drips, splashes, leaks and spills.
Part#
Qty/Case
S2-71
100
S2-75*
100
*Double Weight
Size
12” x 12” $46.00
16” x 18” $112.00
GRAB&GO® Quick Response Bucket
Specially designed for portability the GRAB&GO®
Bucket is packed with sorbent dikes and pads for quick
containment of hazardous spills. Just grab a bucket &
go.
Part#
205304
Included with bucket
(4)
3” x 4’ Dikes
(5)
12” x 12” Pads
$74.00
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
107
GAS DETECTING & MONITORING
SENSIT® P100 - PERSONAL GAS MONITOR
The SENSIT® P100 has high and low alarm levels through audio, visual and vibratory
warnings. TWA and STEL alarms are also included, as well as alarm-event data logging.
Durable rubber-coated housing withstands incredible abuse and is nearly waterproof.
Key Benefits
• Easy to Use - One button operation
• Operates 2 Years Before Service is Required, resulting in more years of service
• Serviceable Sensors
• Easy Calibration
• Manufactured and Serviced in Indiana
• Limited 2 Year Warranty (including sensors)
Gas
Item #
Price
$224.00
CO
912-00000-03
Sensit® Gold Series
Leak detection and gas monitoring combined in a single package. These instruments
can be custom configured to meet your needs when detecting combustible gases in the
LEL range, locating combustible gas leaks in the PPM range, measuring oxygen
content, carbon monoxide and/or hydrogen sulfide. All instruments are equipped with an
internal pump for constant sampling. Audible and visual alarms warn the operator of
hazardous conditions.
Key Benefits
• fast leak detection
• Simultaneously view all gas concentrations
• Simple calibration
• Download operational and calibration data
• Lowest overall cost of operation
Gas
Item #
Price
$2009.00
LEL, CO, O2, H2S
909-00000-H
LEL, CO, O2, HCN
909-00000-J
$2009.00
SENSIT®TKX - COMBUSTIBLE GAS LEAK DETECTOR
The TKX is a state-of-the-art leak detector used to rapidly locate combustible gas leaks.
High sensitivity allows rapid leak detection and tick rate control to pinpoint leaks. Low
initial cost and low maintenance make the SENSIT®TKX the perfect choice.
Key Benefits
• High sensitivity allows immediate leak detection
• Audio and visual leak indicator
• Adjustable tick rate to pinpoint leaks fast
• Solid state sensor
Item #902-00000-02
$210.00
SENSIT®HXG-2D - COMBUSTIBLE GAS LEAK DETECTION
The SENSIT® HXG-2d gas detector pinpoints leaks quickly with its true digital display
and electronic tick control. This multi-gas detector is ideal for natural, butane and propane gas leaks. The SENSIT® HXG-2d is safe, durable and reliable.
Key Benefits
• Direct PPM readout
• Direct "LEL" percent readout
• Electronic tick rate control to pinpoint leaks
Item #906-00000-08
$424.00
*Many other configurations available - please call for details
108
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
GAS DETECTING & MONITORING
Ventis™ MX4 Multi-Gas Monitor |
Industrial Scientific
VTS-K1231101201
Equipped with: LEL,CO, H2S, O2 Sensors,
Standard Lithium-ion Battery, Desktop Charger,
High-Visibility Orange (Shown Left)
LEL, O2, H2S, CO
$751.00
Equipped with: LEL,CO, O2 Sensors, Standard
Lithium-ion Battery, Desktop Charger,
Black (Not Shown)
VTS-K1031100211
Ventis™ MX4 Confined Space Kit |
Industrial Scientific
Kit includes the following:
Ventis MX4 Monitor with pump, universal
charger, soft carrying case, service tool, reference guide, calibration tubing, dust filter/water
stop, calibration fitting, sample tubing,
calibration gas (appropriate mix) with regulator,
rugged hard plastic case.
LEL, O2, CO
$688.00
VK-K1232110211
LEL, O2, H2S, CO
$1444.00
VK-K1032110211
LEL, O2, CO
$1176.00
VK-K0232110211
LEL, O2, H2S
$1365.00
LEL (Lower Explosive Limit), O2 (Oxygen), CO (Carbon Monoxide), H2S (Hydrogen Sulfide)
*Other Configurations Available - Call for information/pricing
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
109
WILDLAND HAND PUMPS
VT100 VesTank™ Portable Fire Pump
• For fighting brush fires • Easy to put on • One size fits all
• More comfortable than back packs because water is evenly distributed
around the torso
• 8 gallons capacity, up to 60% more than backpacks
• Made of strong/durable urethane coated Nylon, which makes the
VesTank™ lighter and more flexible than rigid steel tanks and easily
repairable unlike double wall tanks
• Water inside the vest helps keep the body cool
• Large “fill port” • Folds flat for easy storage
• Quick-connect pump-to-tank attachment
• Unique pump features impact plastic over brass design
• Tool-free assembly/disassembly allows the pump to be cleaned &
repaired quickly & easily
• High volume pump directs stream of water more than 35 ft.
• Comes standard with adjustable spray and fixed stream nozzles.
$382.00
M100 Ranger Deluxe Rigid-Pak Brush Pump
w/ Pistol Grip
• “Thick walled” polyethylene plastic tank is thicker & uniform -will handle
rough and harsh environments
• “Non-slosh” rounded design keeps the unit balanced and steady
• Full padded pillow comforts that impinging feel of other tanks
• Completely corrosion resistant; will not rust like galvanized steel models
• Adjustable padded shoulder straps are rugged, yet fit comfortably and
distribute the weight evenly down your back
• 5 gallon capacity
$156.00
Shown with
RCB Bracket
SPBP-5 Soft Pak Brush Pump
This portable pump tank features the only double walled pump tank on
the market. A tough and replaceable inner bladder gives extra strength,
making the unit durable, cost effective and easy to repair. Features a collapsible 5 gallon tank, quick detachable buckles and padded shoulders.
Weighs only 4 1/2 lbs.
$156.50
110
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
WILDLAND TOOLS
MCLF
FF
BRF-5
LSS27D
PUL-5
1304
MCLF McCloud Tool
Complete with fiberglass handle and heavy duty hoe blade to withstand the rigors of Wildland firefighting. Can be used for
trenching, grubbing or slashing brush. Also useful in cutting through deep duff, underbrush, and similar fuels.
$51.95
FF Flamefighter Fire Flapper
$44.00
BRF-5 Brush Rake 5' Fiberglass Handle
$41.95
PUL-5 Pulaski Axe
A combo axe and grub hole ideal for chopping, digging fire lines in hard and soft soils. Ground and tempered cutting edges.
$50.95
1304 Perfex Fire Broom
A broom especially adapted for fighting fires. Constructed of Rattan with a metal case and a heavy ash handle.
$15.50
LSS27D 27" Large Scoop Aluminum Shovel, w/ D Handle
$50.00
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
111
TRUE NORTH PACKS
FIREFLY™ Packs
$202.46
The most versatile Fire Pack on the market. Our load swallowing 2200 cu in
gear bag, combined with the trap pocket and lash down loops, means you can
take it all with you when you're working the line. With two quick zips you can
drop the gear bag and carry just the essentials - 100oz. hydration bladder, fire
shelter, fusee pocket, and all the gear you can stuff in the 300 cu in stash
pocket. So whether you're working near equipment or out in the wilderness, the
Firefly does it all.
This pack is designed to meet the specifications of NFPA 1977 edition.
•
•
•
•
•
•
•
•
•
•
Capacity: 2500cu in/ 4lbs
SCS™ patented load-trapping suspension
Quick-Zip Removable gear bag
100oz Hydration pocket (reservoir not included)
Removable New Generation Fire Shelter case
Side Pockets hold (2) 1L Bottles
18 Fusee carrying capacity
Flaps covering all zippers
Cut-out side pockets
Dimensions: 16" x 10" x 6.5"
• Colors: Red, Black
• Sizes: Standard, Small (Hipbelt/Harness)
FF200 - Black Small
FF210 - Black Standard
FF203 - Red Small
FF213 - Red Standard
SPITFIRE™ Packs
$161.96
Designed by Hotshots. Our mid-sized fire pack has capacity to carry extra gear
for those long days in the brush. Fusee pockets, fire shelter case or SAR case,
huge side pockets, and room for lots of water.
This pack is designed to meet the specifications of NFPA 1977 edition.
• Capacity: 2250 cu in
• Weight: 3 lbs
• Materials: 1000D Cordura®, Nylon Webbing, #10 & #8 YKK® Zipper, Nylon
Webbing, Nylon Hardware
• 100oz (3L) Hydration pocket (reservoir not included)
• Removable New Generation Fire Shelter case (attach to pack or belt)
• Side Pockets hold two 1L Bottles
• 12 Fusee carrying capacity
• No swing fire shelter case
• Flaps covering all zippers
• Dimensions: 15" x 10" x 6"
• Colors: Red, Black
• Sizes: Standard, Small (Hipbelt/Harness)
SF200 - Black Small
SF210 - Black Standard
112
SF203 - Red Small
SF213 - Red Standard
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
JUNKIN STRETCHERS
JSA-300 Lightweight Basket Type Stretcher
Nylon web straps at chest, abdomen, thigh, and calf. Adjustable footrests for vertical lifting. Frame is 5/8" steel tubing; cross braces and runners 3/16" x 3/4" flat steel. Basket is
18 gauge, 1" hexagon mesh netting.
DIMENSIONS: 80-1/2" L; 8" H
$238.00 (extra motor freight charges apply)
JSA-300W Same as the JSA-300 without leg dividers or footrests.
$238.00 (extra motor freight charges apply)
JSA-300CS Confined Space Splint Rescue Stretcher
The new 19" width Stretcher has been designed for rescues where space is confined.
With steel, all-welded rigid construction, which does not rely on the injured person to
attain form or rigidity. Light in weight and ample in size. The basket is 18 gauge, 1" hexagon mesh netting. Nylon web straps for securing at chest, abdomen, thigh and calf.
Supplemental accessories to facilitate special handling needs are available.
DIMENSIONS:
81 1/2" L; 18 3/8" W; 7 3/4" H
$280.00 (extra motor freight charges apply)
JSA-300-B Break Away Stretcher
Designed to rescue injured persons from locations where lengthy foot travel is mandatory. The stretcher breaks into two halves which can be back-packed to the point of rescue
and assembled in seconds. It can be secured to a standard back-pack for carrying.
Three positive lock clamps secure two halves together. Four 60" web straps are standard. Stores in space 44" x 12" x 24".
$522.00 (ships via UPS)
JSA-200 Plastic Stretcher
Yellow high-density polyethylene shell, supported by a stainless steel outer rail, permanently attached with stainless steel semi-tubular rivets. Features molded runners, fully
exposed outer rail, non-absorbent foam pad secured to stretcher and four patient
restraint straps. Ideal for unusually rugged rescue situations such as industrial, mining or
construction. Patent Pending.
$552.00 (extra motor freight charges apply)
JSA-200B Break-Away Plastic Stretcher
The same construction as JSA-200. Designed to rescue injured persons from locations
where lengthy foot travel is required. The stretcher breaks into two halves which can be
back-packed to the point of rescue and assembled in seconds. Positive-locking quickrelease pins secure two halves together. Four straps are standard.
DIMENSIONS: 84 1/2" L; 24" W; 7 1/2"
$722.00 (ships via UPS)
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
113
TURTLE PLASTICS
Turtle Plastics Cribbing Kits - Standard and Super Kits
Proudly made in the USA from 100% recycled plastic.
Unlike traditional wood cribbing, Turtle Plastics Dura Cribbing is stronger and
more effective. The strong plastic is stable and will not absorb oils or other
Kit B
hazardous fluids on the scene. Each cribbing piece includes a rope handle or
molded hand grip for easy carry and deployment. The Dura Crib® Kits includes
Cribbing, Wedges, Lock Blocks and Chocks, all packed into one complete kit.
• Non-Absorbing • Super Stability • Corrosion proof • Non-splitting
• Stronger, cleaner, and safer than wood
Available in many kit styles shown below - See our website for more options/info
Part No.
Contents
Kit A1
Kit B2
Kit C3
Super
Kit D4
Super
24-18
2" x 4" x 18" Crib
6
12
24
24
48
48
2/4-12
2" x 4"x 12" Wedge
2
4
8
8
16
16
44-18
4" x 4" x 18" Crib
6
12
24
24
48
48
4/4-20
4" x 4" x 20" Wedge
2
4
8
8
16
16
44LL-18
4" x 4" x 18" Lincoln Log
67SC-24
6" x 7" x 24" Super Crib
4
8
16
16
8
32
32
16
6/7-24
6" x 7" x 24" Super
2
4
Kit C3
Kit D4
67SC-24
Wedge
3W
3" x 8½" Wedge
2
4
6
6
8
8
6W
6" x 8½" Wedge
2
4
6
6
8
8
1B
1" x 9" x 9" Lock Block
1
2
3
3
4
4
2B
2" x 9" x 9" Lock Block
1
2
3
3
4
4
3B
3" x 9" x 9" Lock Block
1
2
3
3
4
4
SC-1
Step Chock
2
SC-2
Medium Step Chock
SC-3
Giant Step Chock
BP2424
24" x 24" Bag Pad- Gray
TBP
Top Bag Pad
CB
Carrying Bags*
CT
Crib Toters*
4
8
8
16
16
2
4
4
8
8
2
2
4
4
2
4
4
8
8
2
4
4
8
8
2
3
6
6
6
6
1
3
4
4
12
12
SC-3
CB
Price
Black Without CB & CT
$1060 $2845
$6430
$7345 $12000 $13840
Price
Black With CB & CT
$1330 $3190
$7045
$7950 $12970 $14785
Receive the following additional BONUS items free when purchasing above kits:
Bonus 1
Kit A receives an additional: (1) ea. 1B, 2B, and 3B
Bonus 2
Kit B Kit receives an additional: (1) ea. 3W, 6W, and (4) ea. 44LL-18
Bonus 3
Kit C or Super C receives an additional: (1) ea. 3W, 6W, (2) ea. 44LL-18, and
(2) ea. Shoring Cribs
Bonus 4
Kit C or Super C receives an additional: (1) ea. 1B, 2B, and 3B, (2) ea.
Shoring Cribs,(8) ea. 44LL-18, (1) ea. 3W, 6W, SC-3
CT
Yellow add 25% to all prices shown above
Shipping charges are additional - We will call you for pre-approval
114
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
SAVA AIR BAGS
High-Pressure Heavy Lifting Air Bags
Sava manufactures pneumatic high-pressure heavy lifting air bags reinforced with Kevlar® cord for heavy-duty, low profile heavy
lifting, emergency rescue, HAZMAT management or industrial use.
Heavy lifting bags are thin profile and simple to use. The convex, dimpled, interlocking surface and safety straps provide superior
gripping power when two lifting bags are stacked on top of each other.
• Solid brass and thick Kevlar-cord reinforced rubber pneumatic lifting system minimizes risk, sparks and damage caused by
mechanical or hydraulic devices.
• Safety straps minimize shifting hazards and allow bags to be strapped together for safety. Safety straps also provide anchorage
for attachment of pulling and placement ropes so it is not necessary for personnel to reach under a live, unstabilized load
• Use when maximum lifting force is needed in low clearance situations.
• Exerts up to 116 pounds per square inch of contact surface.
• Twelve standard sizes are available with lift capacity up to 74 tons.
*Note: Selection of the proper air bag depends on the ratio of height vs. weight. You would not use a 30 ton air bag to actually lift
30 tons. Max lift height decreases as the weight increases. Use the graph below to determine the maximum height any particular
bag will lift a certain weight.
See our website: www.fire-end.com/airbag-highpressure.htm for details
S
RIE ITS
O
S
ES
EK
ACC MPLET
CO
BLE
AND AVAILA
ILS
ETA
D
R
L FO
L
A
C
Part #
Size Deflated
Thickness
** Max Lift Height
** Max Load/Tons
Bag Weight
Max Pressure
77973
6" x 6"
1.1"
2.7"
1.1
1.32 lbs.
116 psi
77974
9" x 9"
1.1"
5.1"
3.1
2.8 lbs.
116 psi
77975
12" x 12"
1.1"
5.9"
6.4
5.3 lbs.
116 psi
76734
15" x 15"
1.1"
7.0"
10.8
8.8 lbs.
116 psi
76735
18" x 18"
1.1"
8.6"
14.2
11.6 lbs.
116 psi
Part #
Size Deflated
Thickness
** Max Lift Height
** Max Load/Tons
Bag Weight
Max Pressure
76737
24" x 24"
1.2"
11.8"
27.7
24.6 lbs.
116 psi
76738
27" x 27"
1.2"
14.4"
35.3
29.3 lbs.
116 psi
76739
31" x 31"
1.2"
16.5"
46.4
40.1 lbs.
116 psi
76794
35" x 35"
1.2"
17.7"
58.8
49.6 lbs.
116 psi
76740
36" x 36"
1.2"
20.0"
74.1
55.8 lbs.
116 psi
76736
22" x 22"
1.1"
10.6"
22.7
17.8 lbs.
116 psi
*CALL US FOR ALL SAVA PRICING*
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
115
BRASS ADAPTERS & BALL VALVES
BALL TYPE SHUT-OFF VALVES
• Large ports to minimize pressure drop and turbulence
• Conserves space
• Low torque operation
• Visual indication of operating condition - open or closed
• Speed of operation
• Tested hydrostatically in the open and closed position
• Positive closure
• Simplicity of maintenance
• Flow in either direction
• Durability
• Straight through flow
• Reliability
• Forged strength up to 600 lbs. pressure rating
• Listed by Underwriters Laboratories, Inc.
• Ease of installation
• Approved by Factory Mutual Research Corporation
Furnished: Female NPT inlet and outlet, forged brass body with cadmium plated vinyl insulated handle
and chrome plated brass ball with Teflon seats.
All dimensions are shown in inches.
Part
Number
5305
5310
5315
5320
5325
5330
5335
5340
5345
5350
Size
1/4”
3/8”
1/2”
3/4”
1”
1-1/4”
1 1/2”
2”
2 1/2”
3”
A
1.844
1.844
2 1/8
2 1/2
3
3 7/16
3 3/4”
4 3/8”
5 3/4”
6
B
1.313
1.313
1 3/8
1 3/4
1 7/8
2 1/16
2 3/8
2 11/16
3 1/4”
3 1/2
C
0.394
0.394
0.472
0.672
0.891
1.109
1.378
1.772
2 1/4
2 5/8
D
3.063
3.063
3 5/8
3 13/16”
3 13/16
3 3/16
4 13/16
4 13/16
6
6
Pressure
Rating Price
600
$7.00
600
$9.00
600
$9.50
600 $14.00
500 $18.00
500 $31.50
500 $39.00
500 $52.50
400 $163.50
400 $226.50
CAST BRASS HEX ADAPTERS
DOUBLE MALE
DOUBLE FEMALE
FEMALE X MALE
IPT x NST
IPT x NST
IPT x NST or NST x IPT
7201
1.5” x 1.5” $10.50
2.5” x 2.5” $22.00
7215
1.5” x 1.5” $14.50
2.5” x 2.5” $29.00
7220
1.5” x 1.5” $12.50
2.5” x 2.5” $27.50
POLISHED CHROME BRASS CAPS and REDUCERS
1.5” CAP AND CHAIN, NST
2.5” CAP AND CHAIN, NST
FEMALE X MALE
2.5” F NST x 1.5” M NST
5709-PC (pin lug only)
$13.50
116
5713-PC (pin lug only)
$19.00
7245-PC (pin lug only)
$15.25
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
SPECIALTY ITEMS
The Storz 2-in-1 Universal Adapter
Imagine being able to do mutual aid without fumbling around
and changing adapters.
201-051 with 37R and CC152
Description
2 1/2” NST Female Swivel Elbow to 4” Storz to 2 1/2” NST Male
3” NST Female Swivel Elbow to 4” Storz to 2 1/2” NST Male
2 1/2” NST Female Swivel Elbow to 5” Storz to 2 1/2” NST Male
3” NST Female Swivel Elbow to 5” Storz to 2 1/2” NST Male
2 1/2” NST Female Rigid Straight to 4” Storz to 2 1/2” NST Male
3” NST Female Rigid Straight to 4” Storz to 2 1/2” NST Male
2 1/2” NST Female Rigid Straight to 5” Storz to 2 1/2” NST Male
3” NST Female Rigid Straight to 5” Storz to 2 1/2” NST Male
2 1/2” NST Female to 1 1/2” NST Male Adapter
1 1/2” NST Cap and Chain
Part Number
201-041 $257.00
201-042 $268.00
201-051 $279.00
201-052 $283.00
201-41 $194.00
201-42 $205.00
201-51 $231.00
201-52 $242.00
37R
$14.50
CC1552 $11.00
Haz Mat Adapter
K-Brite Aluminum
Part #
Size
40H25FGGU
$ 30.50
2.5” F x (2) GHT Male
40H15FGGU
$ 18.50
1.5” F x (2) GHT Male
Cap Gauge 0-300 lbs
Line Gauge 0-300 lbs
K-Coat Aluminum
K-Coat Aluminum
Part #
Size
LG35
LG30
LG25
LG15
3.5”
3.0”
2.5”
1.5”
$
$
$
$
185.00
145.00
123.00
117.00*
Part #
Size
GC2052-1
GC2552-1
GC3052-1
2.0”
2.5”
3.0”
Optional Petcock
$ 133.50
$ 136.50
$ 148.00
Add $10.00
*LG15 gauge does not come protected as shown in picture
Inline Jet Siphon (Thread)
Power Jet Siphon (Thread)
K-Brite Aluminum
K-Brite Aluminum
Part #
Size
JS160
JS150
JS145
JS140
6.0”
5.0”
4.5”
4.0”
$
$
$
$
202.00
186.00
166.00
127.00
Part #
JS60
JS50
JS45
JS40
Size
6.0”
5.0”
4.5”
4.0”
$ 122.50
$ 119.00
$ 117.50
$ 106.00
ALL ITEMS ON THIS PAGE AVAILABLE IN COLORS & ENGRAVED!
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892
117
LADDERS
ALCO-LITE Aluminum Pumper Type Ladders
ALCO-LITE invented the aluminum ladder. The ALCO-LITE name is synonymous with quality, dependability and service. For these reasons, ALCO-LITE fire ladders are used by all types of departments - paid and volunteer - large and small
throughout the U.S. and the world.
All ALCO-LITE ladders meet or exceed the applicable standards established by NFPA for fire department ground
ladders. These ladders are designed to be used in accordance with the practices establihed by both the National Fire
Protection Association (NFPA) and the International Fire Safety Training Association (IFSTA). For complete information on
these practices, please contact the appropriate organization to obtain their documents relative to fire department ground
ladders.
PRL Series - Pumper Type Roof Ladders
Length
8’
10’
12’
14’
16’
18’
20’
New Model
Number
PRL-08
PRL-10
PRL-12
PRL-14
PRL-16
PRL-18
PRL-20
Old Model
Number
ALP-100-08’
ALP-100-10’
ALP-100-12’
ALP-100-14’
ALP-100-16’
ALP-100-18’
ALP-100-20’
$214.00
$217.00
$237.00
$258.00
$304.00
$343.00
$382.00
PEL Series - Pumper Type Two-Section
Length
12’
14’
16’
20’
24’
28’
30’
35’
New Model
Number
PEL-12
PEL-14
PEL-16
PEL-20
PEL-24
PEL-28
PEL-30
PEL-35
Old Model
Number
ALP-200-12’
ALP-200-14’
ALP-200-16’
ALP-200-20’
ALP-200-24’
ALP-200-28’
ALP-200-30’
ALP-200-35’
PRL Series
Roof Ladders have
high strength steel,
3/4" rotating roof
hooks with reinforcing
brace for longer
service and durability
$349.00
$400.00
$442.00
$492.00
$550.00
$685.00
$773.00
$869.00
PEL3 Series - Pumper Type Three-Section
Length
24’
28’
30’
35’
40’
40’
New Model
Number
PEL3-24
PEL3-28
PEL3-30
PEL3-35
PEL3-40
PEL3-40P*
Old Model
Number
ALP-300-24’
$762.00
ALP-300-28’
$793.00
ALP-300-30’
$848.00
ALP-300-35’
$924.00
ALP-300-40’NS $1,272.00
ALP-300-40’ $1,434.00
PEL Series
PEL3 Series
FL Series
*P includes staypoles
Ladder Covers
• Heavy Duty Yellow Cordura Nylon
• Reflective strip with “STAY BACK” sewn on
• High density foam padding for bump protection
FL Series - Folding Ladder
Length
8'
10'
12'
14'
New Model
Number
FL-08
FL-10
FL-12
FL-14
Old Model
Number
ALP-080-08’
ALP-080-10’
ALP-080-12’
ALP-080-14’
$155.00
$187.00
$204.00
$217.00
Sizes shown below are inside dimensions
651
22”H x 4” W x 8” D
652
24”H x 9” W x 8” D
653
26”H x 11” W x 8” D
654
29”H x 14” W x 8” D
$71.00
$83.00
$103.00
$108.00
*At the time of printing, all prices on this page were current. However, due to volatility of metal prices, all prices on this page are subject to
change as dictated by market prices. Please call to verify prices before placing your order.
118
For Orders and Questions: Phone 800-759-FIRE or Fax 914-592-3892