C Section - Growers' Guide
Transcription
C Section - Growers' Guide
January 2015, “The Growers’ Guide” Page C1 Rental Fleet Returns with LARGE INVENTORY Huge In Stock! New JCB Telescopic Bale Handlers Excellent for handling the largest bales, Several good used telescopic bale handlers in stock! .. Discounts! PRICED TO MOVE Following is a list of like new CaseIH rental fleet tractors with large fleet discounts plus additional discounts for hours rented.It is impossible to list all of the important options and also special financing programs available for these units. From Utility Tractors to QuadTracs GREAT PLAINS, 40’ double disc drill CASE IH ECOLO TIGER 730B, 19’ disc ripper (U2019) .......... $24,995 with 3x13 press wheels (U683) $49,900 HUGE INVENTORY IN STOCK ✔ OVER 10 USED SWATHERS Priced to sell!!! ★ CASE IH 500 QUAD, approx. 500-hrs, PTO, 36” tracks, new warranty, loaded with options. ★ STEIGER 350 ROWTRAC, approx. 500-hrs, PTO, 3-pt, 24” track, new warranty, loaded. ★ STEIGER 350 ROWTRAC, 350-PTO-hp, 30” tracks, low hrs, loaded with options. ★ CASE IH 340 MAGNUM, 340-PTO-hp, Powershift, susp. axle duals, loaded with options. ★ CASE IH 315 MAGNUM, 255-PTO-hp, Powershift, loaded. Lots of rental $$$ off prices! 3 available. ★ CASE IH 290 MAGNUM, 230-PTO-hp, duals, low hrs, new warranty, loaded with options. ★ CASE IH 225 MAGNUM, 225-PTO-hp, CVT transmission, loaded with options, 3 units available. ★ CASE IH 210 MAGNUM, 180-PTO-hp, duals, low-hrs, new warranty, loaded with options. ★ CASE IH 180 MAGNUM, 150-PTO-hp, Powershift, loaded with options. ★ CASE IH MAXXUM 140, 140-PTO-hp, bar axle, 14.9x30, 14.9x46, loaded, 2 units available. ★ CASE IH MAXXUM 125, 105-PTO-hp, 14.9x28, 18.4x38, 3 aux remotes, loaded with options. ★ CASE IH MAXXUM 115, 95-PTO-hp, low-hrs, loaded with options. ★ CASE IH MAXXUM 110, 110-PTO-hp, bar axle, 16.9x38, 13.6x28 4WD, loaded with options. ★ FARMALL 120A, 96-PTO-hp, 4-WD, bar axle, 18.4x38, 14.9x28, economy pricing on this unit. ★ FARMALL 110A, 90-PTO-hp, 2 & 4-WD available, economy pricing on these units. ★ FARMALL 105U, 90-PTO-hp, loaded with options, 3 units available. ★ FARMALL 95C, 95-PTO-hp, cab, 4WD, shuttle & lots of options. ★ FARMALL 75C, 75-PTO-hp, numerous options including 2 & 4-WD low-hrs, 4 units available. Hesston, MF, NH, & MacDon ✔ OVER 13 USED TWIN ROW HAY RAKES SOME LIKE NEW! LANDOLL 2132-17, disc ripper (U1869) ............... $38,000 JD 512, 23' Disk-Ripper, (U770) $29,900 CASE IH 500Q, 3-point hitch, 30” tracks, (U1844) ............ $179,000 CASE IH MAGNUM 275, 225-PTO-hp, duals, weights front & rear, $ front suspension (U1744) ..... $114,900 BIG G, 40’ heavy duty tandem disc 37,900 SUMMERS SUPER C, vertical tillage tool, harrow (U1960) . $32,000 LIKE NEW SCHULTE JD 9530T, 36" tracks, weights, $179,000 (U1922) 62” heavy duty snow blower ‘10 CAT CHALLENGER MT765C, 3-pt, PTO, extra remotes, low-hrs, (U1822) .$199,000 MOSES LAKE, WA 800-572-0430 509-765-1257 1201 E Yonezawa Blvd. KRAUSE TL-6200, disc cultivator with finishing harrow (U830) .. $20,625 4,176 $ (Pasco Store) PASCO, WA HERMISTON, OR SUNNYSIDE, WA 1802 East James St. 78112 Hwy 207 405 Scoon St. 888-547-9003 (509) 547-9003 888-561-2331 (541) 567 -2331 800-282-3833 (509) 837-3833 January 2015, “The Growers’ Guide” Page C2 S O! U E E S G EXP The True Residue Management System: A T A The Joker The Ultimate For Residue And Seedbed Preparation! Provides faster drying and warming in wet soil conditions! • Excellent Residue Management! • Great For Soil Consolidation And Field Finishing! • Awesome Trash Flow Capacity! 3-Point Or Pull-Types Available! L A T N E R Notched blades, spade discs and ring packers make for the perfect precision tillage tool! Unit Available! • Maintains Consistant Seedbed Depth! • Conserve Moisture! Steerable Axle COUGAR 238 • SW8000 Cart with Steerable Axles 2-Rank, 38’ Drill NW Proven! (509) 994-2133 N ORTH PINE AG EQUIPMENT, INC. E-Mail: [email protected] Located at E. 2007 Babb Road, Rosalia, WA CALL (509) 994-2133 WCA Bull Test 60 Day Progress Report The 22nd Annual Washington Cattleman’s Association sponsored WCA Bull Test has issued a progress report for the first 60 day test period of their 120 day feed test. The test is located 15 miles north of the Tri-Cities, WA at the Bonina Feed and Sale Facility at Eltopia, WA and is be under the sponsorship of the Washington Cattleman Association. One hundred thirty-three bulls are being tested this year, comprised of Angus, Red Angus, Horned and Polled Herefords, Simmentals and SimAngus. These bulls represent the top genetics from the Northwest’s top seed stock producing herds. A high percentage of the bulls on test are sired by top nationally known A.I. sires. These bulls range in age from January 1, 2014 to March 31, 2014. Performance records such as birth, weaning and yearling weights and EPDs are available. Bulls will be ultra-sounded for rib eye, marbling, and fat thickness and the actual results with EPDs and $ Beef Values will be posted prior to the sale. Every bull has tested negative for BVD, tested trich-free and certified to be virgin bulls. Semen and breeding evaluations will be conducted by an accredited veterinarian. “We have tightened up the health and performance requirements” said Loren Hagen, WCA Breeds Committee Chairman. He went on to say “This emphasis on health and performance will assure buyers of a quality product. The first 60 day weights show a gain of 3 plus pounds per day. This is about what we are looking for to express their performance while keeping the bulls sound and not over fed.” Only the top end of the bulls of each breed will be allowed to sell, based on the Test Final Station Index (1/2 ADG and ½ Adjusted Yearling Weight Index), structure, physical, and breeding soundness evaluation. A Low Birth EPD section for Angus and Hereford will be separated. To qualify for this division an Angus bull must record a +2.0 BEPD or less, a CED of +7 or more and an actual birth weight of 85 pounds or less. In addition, both the sire and dam must have a birth EPD of +2.0 or less. The Hereford bulls must record an actual birth weight of 80 lbs. or less and post a BEPD of 2.0 or less and a CED of +2.0 or greater to qualify. Additionally, both the sire and dam should record a BEPD of +3.5 or less. Genetic profile enhancement through DNA samples will be used again this year on many of the bulls selling. This genetic tool conducted by Igentiy and Pfizer lends more reliability to the EPD’s calculated for each individual animal. Thus, buyers will be able to make better choices for their individual breeding programs because of this increased reliability. The 120 day test will end on March 1, 2015. At that time breeding soundness exams, semen tests and ultra-sound data will be compiled prior to the March 25, 2015 sale. LiveAuctionsTV will be involved with the sale as well as pre-sale videos. They will post the videos of individual bulls on their website after March 1st and will be conducting internet bidding in real time during the sale. These videos and live biddings will be conducted on their website: liveauctions.tv A social hour and forum, hosted by the Washington Cattlemen’s Association, will be conducted at 5:00 pm March 24th with featured speakers on topics of interest to the cattle industry. The sale is scheduled for March 25, 2015 at the Bonina Feed and Sale Facility in Eltopia, WA. The WCA Allied Industries members will sponsor a trade show. Starting at 8:00 am sale day, this trade show will include booths and presentations of interest to livestock producers. A complimentary tri-tip barbeque lunch will also be held at the trade show. All of these events are free, thanks to the sponsorship of the WCA Allied Industry members. The bulls can be viewed at any time at the Bonina facility located 15 miles north of Pasco, WA. Progress reports can be viewed on the Washington Cattleman Association website, www.washingtoncattlemen.org. The 60 day and Final (120 day) test results and sale catalogs are available by mail by contacting the Washington continued on page C5 January 2015, “The Growers’ Guide” Page C3 (509) 632-5205 Agricultural Equipment • Consignment • Appraisals • Loader Tractors “Where My Mission Is Helping Farmers Turn Excess Capital Into Working Capital” TRACTORS '02 JD 8520T, 5400-hrs, 255-hp, 16-spd powershift, 1000-PTO, cast weight pkg, 3-pt, autosteer, 4-remotes, 25" tracks, all fluids changed last year, Very Nice! BIG REDUCTION! ............... $96,000 JD 8430, 8,700-hours, 4WD, 215-hp, QuadRange, 90% on 20.8x34 tires, runs good! ............................... $13,500 CASE 4690, 261-hp, 20.8x34 tires, Runs Good! .....REDUCED! $7,750 CLARK MICHIGAN 75C, loader, Cummins, recent torque converter & front planetary overhaul, 20.5x25 tires, material bucket, newer Houle rock bucket extra ....... $12,000 FIAT/HESSTON 1180, 7485-hrs, turbo, 3-pt, 102-PTO-hp, 2WD, cab, 18.4x38 tires, 540-1000 PTO, with HESSTON L360, high lift loader 7' material bucket, mechanic special - fuel problem .... $4,800 IH 400, gas 4-cylinder, wide front, 13.6x38 rear, 6.50x16 front, 3-point, PTO, loader and 5-1/2' front blade, runs good ... $2,800 DEGELMAN 6600 12-1, 12' dozer blade, hyd lift, skid shoes, Challenger mount, used for snow only. NICE! ................ $9,800 IH TD9, dozer tractor with 9' Holt blade, 2nd owner, recent tune-up, have operating books. Good older tractor!. $4,800 SPRAYER/FERTILIZER '93 CHALLENGER 65C, 9,800-hours, 285-hp, 12-spd Powershift, 3-pt, 27" tracks, 4-remotes, front suit-case weights, runs good! ..... $35,000 CAT AG D6D, 3306 turbo engine, 6-spd, 26" pads, 6 roller, factory cab, newer U.C. block heater, with 12' blade & hard nose, farm or doze, Rare find!$34,900 CAT D5-98J, 5-spd, 24" pads, cab/air . $4,500 COMBINES '91 JD 9600, 1880-S-hrs showing, newer 30.5x32 singles, adjustable rear axle, updated walker blocks, fixed chaffer with risers, spreader, dealer inspected and OH annually, with JD 930 header, good HS flighting, updated wobble box, header cart and dolly. Nice!...... $39,000 '90 JD 9600, 3300-S-hrs, newer 30.5x32 tires, HD rear axle, updated walker blocks, fixed chaffer, chaff & straw spreader, newer air seat, A/C just overhauled, '00 JD 930 header, pick-up reel, Calkins header cart.................. $34,000 '83 JD 6620, 1900-hrs showing, spreader, HD rear axle, axle extensions, grain monitor, 20.8Lx26 drive tires, dual range cylinder drive, 16.5L rear tires, with JD 20' header & pickup reel, HS ...... $8,000 '83 JD 6620, SideHill, 3475-hrs, 28Lx26 drive tires, 11.25x24 SL rear tires, dual range cyl. drive, spreader, HD rear axle, with JD 222 header, cart, approx $500 of extra parts, stored inside, 2nd owner .............REDUCED! $9,800 '81 JD 6622, Hillside, 2437-hrs showing, spreader, monitor, 24.5x32 drivers, 14.9x24 rears, JD 22' header & pickup reel . $10,000 '91 CASE IH 1680, 4,200-hrs, 2,500-hrs on Cummins, 2-spd hydro, Ag Leader yield monitor, duals, updated HD rear axle, Kile rotor flight, a lot of work done, newer elevators, updated finals, etc, with '96 MacDon 960-30' draper header, 3-wheel transport, Case adapter, 1-owner, both always stored inside. Both Very Nice! ..........REDUCED! $32,000 ‘84 GLEANER N6, 2000-hours, newer accelerator rollers, newer wobble box, 134A A/C, with newer 27' header & cart, also N6 parts machine available ..REDUCED! $5,800 '82 GLEANER N6, Series 3, Cumins 8.3L, A/C 134, newer shoe bushings, 30.5Lx32 drive tires, 24' header, newer wobble box and guards, 2-year old bottom. Spare N6 24' header goes with ......MAKE OFFER '08 MACDON 972 25' draper header, pickup reel, MacDon 871 JD combine adapter, Unverferth HT30 cart........ $28,000 HEADER CART, needs resting arms ....... $500 Darrel Parsons Cell: (509) 681-1277 www.parsonsequipment.com Email: [email protected] '06 HARDI COMMANDER 4400, suspended boom sprayer, 100' booms, 1,200-gallon poly tank, 1,000-PTO, 320/90R46 tires, triple nozzles, steerable axle, clean rinse tank, eductor tank with Hardi controllers............. $19,800 SHOP BUILT SPRAYER, 105', 1000-gal. stainless, split tank, ball valve in between for hillside, or use as tow-between tank-cart, ground drive. REDUCED! $5,800 SPRAYER, 90', 1200-gallon aluminum tank, ground drive, Smuckers marker .. $3,600 MCGREGOR TYPE, 80' folding sprayer, 750-gallon stainless tank, Micro-Trak 5-boom controller, agitator .............. $2,900 BEN HUNT, 50' fertilizer machine, 14" spacing, 1500-gallon stainless steel tank, no pump, extra shanks .... $6,500 BLUMHARDT, 3-pt mounted sprayer, approx. 60', 250-gallon, foam marker $5,000 WESTERN AG, tow-between cart, 1000-poly tank, 15-22.5 tires, with hyd pump.....$3,500 STAINLESS STEEL TANK, 750-gallon ..$2,800 ANHYDROUS FERTILIZER TANK, 500-gallon, not certified ....................$1,200 DRILLS CAT V50D, 5,000-lb forklift, propane, 188"/15' lift height, side shift, 36" forks, 7:00x15 front tires, recent tune up. Shop Unit!................................ $6,950 CAT DOZER BLADE, with hard nose . $5,000 CASE IH TRIMBLE EZ-GUIDE 150, guidance system with light bar, GPS antenna, cable. Everything to start! ... $800 GOOD YEAR, Ultra Torque 480/80R38 tractor tire, replaces 18.4R38, over 50% tread. GOOD DEAL! .........1/2 OF NEW $750 2-USED RUBBER TRACKS, for Challenger, mismatched, 30" .............. $750 & $1,800 '03 GREAT PLAINS 2010P, 20' Precision minimum till drill, 7½" spacing, DD measure 13½" - like new, small seed box, precision meter feed style, 6 sets of seed plates, beans, wheat, etc., 400/500-acres on blades, chains, bearings, with GP PH20, precision hitch with 17" coulters, very nice for multi-crops! .......... $36,000 TRUCKS & TRAILERS ‘90 FORD L9000, semi-truck, Eaton 13-spd, 313,695-miles showing, Cummins 855 @ 350-hp, Clean! .................. REDUCED! $7,800 '88 FORD, Super Duty, 460-V8, newer 5-spd, dually, 2-WD, LT235/85R16 tires, new paint, ready for your flatbed! ..... $3,500 ‘78 FORD F-700, 140,200-mi showing, 5/2-spd, gas, single axle, 16' bed, hoist, grain racks, 10:00x20's REDUCED! $4,500 '58 FORD F-600, 330-V8, 5 & 2 trans, 9:00x20 tires, hoist, 14' bed with gravel racks.......... REDUCED! $2,900 ‘56 CHEVY, 2-ton truck, new 350 engine, 2-speed rear-end, with new 16' bed, stock racks, Nice!!! ...... REDUCED $2,900 OLDER INTERNATIONAL, Boom truck, 6-cylinder engine, Rhino winch, stored inside, Runs good!!! .............. REDUCED $2,900 CABLE WELL WATER RIG, Bucyrus Erie 60L, S/N 12246, std. mast, 3/4" drill cable 500/600', sandline, mounted on '78 Kenworth, Cummins, wrenches, enough tools to fill 2-30' flatbed trailers that are included. Very good maintenance. $ Call for more pictures! ...... 80,000 JD 9400, 40' drills, 4-unit set, 12" spacing, 600-acres on new Eagle Beak style points, starter fertilizer manifold, good capped packers, hydraulic depth control, JD hitch, JD hydraulic transports, stored inside. Very nice set! ...... $26,000 IH 7100, 48' grain drills, 4-unit set, 18" spacing, sealed bearings on Barnes capped split packers, Barnes rebuilt axles & A-frames on openers, manual transports, hitch, with extra packers & parts .................. $11,500 IH 6200, 30', 3-unit set, DD-6" spacing, good 13" blades, split boxes–grain & dry fertilizer, grass seed boxes not used, 3" packers, hydraulic transport...... $7,500 IH 150, 48' drills, 18" spacing, 4-unit, split packers, cast boots, hydraulic depth control, wings on openers ... $8,000 IH DSA, 36'x10", 3-unit set, newer points, Barnes capped packers, Barnes bearing update, Calkins hitch, Good Shape! . $4,000 JD LZB, 36'x14" hoe drills, 3-unit set, newer Barber dry fertilizer boxes, hitch .... $5,000 JD LZ1010, 40'x10", 5-unit set, good packers, hyd. depth control, spring trip REDUCED! $6,000 2-JD HZ's, 16" spacing, no hitch, hydraulics some packer wear, ea .....REDUCED! $2,000 JD HZ, 3-unit set, 14" spacing, 2-years on points, square tubing hitch, Good Shape! ........ $5,000 JD EZ147, 32' grain drills, 4-unit set, 7" spacing, hoe style, good points, handle depth control. REDUCED! $2,800 JD LL, 3-unit set, 30'x7", double disc, good blades, manual depth, with hitch....... $1,500 Happy New Year! www.parsonsequipment.com RODWEEDERS CALKINS, 52' culta-weeder with flex tank hitch, 5-section, 1,200-gallon, SS tank, hydraulic drive fertilizer pump, fertilizer shanks only, red hydraulic cylinder, vintage, with Calkins spring tine mounted harrow .............. $15,000 CALKINS, 50' Culta-Weeder, standard shanks, lime green vintage cylinders, front gauge wheels, with Calkins harrow . $11,000 CALKINS, 30' Culta-Weeder, lime green hydraulic cylinder vintage, good wear parts & tires, newer Summers mounted harrow, 3⁄8", Nice Unit! REDUCED! $5,200 6-CALKINS, 60' HD weeders, hyd depth, yellow vintage style, square drive shaft, 7/8" rods, with Stoess hitch, Nice! $10,500 CALKINS, 70' rodweeders, 7-unit set, 1" rods, hydraulic depth control, lime green vintage, square drive shaft, with hitch ........ $7,000 6-CALKINS, 60' weeders, manual depth, yellow vintage style, 1" rods, with Stoess hitch, no pulls ....................... $6,500 CALKINS, 60' weeders, 6-unit set with hitch, 1" rods, hydraulic depth control, lime green vintage, 3 square - 3 round drive shafts. $4,000 CALKINS, 60' weeders, 6-unit set, 1" rods, hydraulic depth control, lime green vintage, square drive shafts, with hitch.. $4,000 CALKINS, 48' weeders, 4-unit set, 1" rods, handle depth control, spreaders with cable hitch ................................. $1,200 6-CALKINS, 10 ½' weeders, lime green vintage, 1" rods, handle depth control, good shape, ea...................................... $650 5-IH 80, 60' weeders, hyd depth, 1" rods, with stiff hitch ................................ $5,000 MORRIS B3-48, 48' Culta-Weeder, with shanks, Good Shape! ............... $3,500 5-DRIVE LINES, fits Calkins 5-section CultaWeeder, with bearings, some misc. parts $1,200 WEEDER CABLE HITCH, 72', can use (6) 12' weeders, ½" cable, Good Shape! ................ REDUCED!$750 CULTIVATORS KRAUSE 4241, 45' cultivator, 7" spacing, K-tine shanks, 5-section, tandems on wings, front leveling wheels, points, 5-bar spike ... $16,000 CALKINS 4+4, 38' cultivator, 7" spacing, lime green vintage, hyd cylinder, 9.5Lx15's, tandems on wings, Morris spring-tine . $6,500 CALKINS SKEW TREADERS, 2-unit, 32', lime green, vintage, hydraulics... $3,000 JD 1000, 42' cultivator, tandems on main frame, 9" spacing, sweeps, bearings in wheel pivots, newer Morris harrow. $4,800 JD 1000, 42' cultivator, tandems on main frame, 9" spacing, sweeps, bearings in wheel pivots, newer Morris harrow. $4,800 JD JD 1000, 42' cultivator, tandems on main frame, single on wings, 9" spacing with JD harrow ............... $4,500 CALKINS 4+4, 36', cultivator, 9" spacing, red hyd. cylinder vintage, tandems on main frame & wings, set up for fertilizer, 10" sweeps, with Calkins white color mounted harrow. Packers not included ............ $7,500 GLENCOE, 34' cultivator, 10" sweeps, singles on wings ......... REDUCED! $1,350 MORRIS CHALLENGER II L-233, 35', 8" spacing, sweeps, with Morris harrow .............. REDUCED! $3,500 MORRIS CHALLENGER II L-225, 30', 9" spacing, sweeps, with harrow............ $3,000 HAY EQUIPMENT '08 NH 488, mower-conditioner, full length rubber rolls, sickle-bar style, side-pull style with manual swing, new $15,000, Nice! .... ASKING $10,500 BALE HANDLER GRAPPLE, off of 1026 tractor...................... $1,750 GRAIN CARTS HINSON 812, grain cart, 1000-PTO, approx. 400 BU, dual axle, newer 385/65R22.5 tires, newer gear box $2,800 SHOP BUILT, grain cart, approx. 350 BU, hydraulic drive, low profile................ $2,000 PLOWS '08 GREAT PLAINS 9533, 33' under cutter, 9-blade unit, 4' sweep blades, 5-section, coulters, low-acres. Nice unit! ......... $26,000 '07 GREAT PLAINS 9326, 26' under cutter, 7-blade unit, approx. 700-acres, extra blade, Nice! . REDUCED! $19,500 CALKINS 1600, 33' chisel plow, tandems on main frame and wings, newer hydraulic depth control cylinders, 16" sweeps, with Calkins white color harrow..$10,000 JD 1600, 35' chisel plow, newer 1-1/4" shank assemblies, tandems on main frame & wings, 14" sweeps, Calkins green vintage harrow, newer tines......................... $7,500 KRAUSE 744A, 32' chisel plow, tandems on main frame, 14" sweeps, with Flexi-Coil harrow ...................... $5,000 OLDER CHISEL PLOW, 15', 15-shanks, 20" sweeps, 28" shanks, 4x4 tubing ... $800 JD 3100, 10-bottom moldboard plow, ED-KA conversion, Nice unit! ......... $3,900 HARROW & PACKERS OLDER CART, 60', with Pepin 5-bar harrow, good teeth, length ............................. $1,800 12-MISC HARROW SECTIONS, spring tine, 5', 5-bar harrow, some wear on tines .....ea $40 DISKS & RIPPERS AC KT, 14' disk, heavy unit for size, tandem tires, good blades, hydraulic depth control .. $3,500 4-JD KBA DISKS, 10' without hitch, ea $100 TOWNER, 27' disks, 9" spacing, 3-sections per disk ... REDUCED! $5,200 MISCELLANEOUS MATHEWS FLEX 30, 30' flail chopper, wing-up style ................ $2,500 '14 JD D110, lawn tractor, OHV 19-hp engine, 42" deck, hydro, high-lift blades, 6.5-bu bagger, operator manual, 1 year warranty remaining, it's like new but $400 less! ............... $1,800 WESTFIELD W80-31, 31'x8" auger, single-phase 5-hp motor, 1 Owner! .. $1,000 BRAND NEW SPICER, rear differential housing, customer purchased and never used, fits 1985 IH S1900 wheat truck, stored inside .... $1,600 SNOW BLOWER, 6½', newer gear box & drive shaft, unknown mfg, 3-point style $650 2-DIESEL TANKS, 1,000 gal ea, without pump and hose ...................... $500 DIESEL TANK, approximately 400-gallons, electric pump, filter & hose, with stand . $440 GAS FUEL TANK, 1,000-gal, with 12-V pump and hose ....................... $700 21-BLU JET COULTER ASSEMBLIES, includes mounts, bats & spring trip , ea ....$175 PALLET OF CALKINS WEEDER PARTS .....CALL MORRIS HEAVY HARROW TINE, ½", approximately 23" long................ CALL MORRIS, heavy tine harrow, 1/2", approx 27" long, like new, enough for 50' cart, some H.S., some with hard caps. 1/2 of new, ea.$13 27-CALKINS, Culta-Weeder fertiizer shanks, good shape, ea ........... $35 DEARBORN, side-mount mower for Ford 8N tractor .................................. CALL GOODYEAR, Ultra Torque 480/80R38 tractor tire, replaces 18.4R38, over 50% tread. GOOD DEAL! ........ 1/2 OF NEW $750 2-TOYO TRUCK/TRAILER TIRES, on 10 hole wheels, 10:00xR22, M-56A tread, ea ............................. $175 USED RUBBER TRACKS, for JD 8400T, 24" bars approximately 1½" tall, ea $1,500 JD HZ DRILL HITCH, 4-unit ................ $800 JD HZ DRILL HITCH, 4-unit ................ $500 JD HZ SINGLE DRILL HITCH, ........... $200 CALKINS, 31' side-hill hitch ................... $400 DRILL HITCH, for JD 9300 drills, 4-unit.. $1,000 OLDER HITCH, orange color, for KBA/skew treaders? ....................... $100 LAND PRIDE RB3584, 7' rear blade, 3-way positions: angle, tilt & offset, Cat I or II for 30-80-hp. New cost is $1,500 with tax. This one is barely used! ..... $1,000 BARBER, 6" grain auger ....................... $200 BARBER, 6" drill-fill seed auger .............. $300 FERTILIZER SHANKS, 25"x3⁄4", ea ....... $2500 MISC. WEEDER & FERTLIZER PARTS, .CALL 2-USED RUBBER TRACKS, for Challenger, mismatched, 30" .............. $750 & $1,800 GORDON CHAFFER SET, for Case 2388, .45", for barley, oats, beans, ect. ......... $500 January 2015, “The Growers’ Guide” Page C4 See Page A10 for the Dealer Index CORRELL’S SCALE SERVICE A R.B. Pugh Company Service • Repair • Installation • Testing Sales • Rental • Lease Specializing in Truck Scales! 509-765-7754 • 800-572-0426 4300 Rd. K NE • Moses Lake www.correllsscale.com e Se ave S & At AG EXPO!!! ★ Our Full Line of in-stock Maurer Hopper Trailers ★ '99 KW T800 38' to 42' trailers & 24' pup MAURER HOPPERS S! SSION I M E O N '99 KW T800, N14 "too much power" Cummins RED TOP, 13-spd, Reyco spring suspension that's 1/5000 and 10,000-lb drop, and low gears, long wheelbase, and at a good price! Priced to sell with or without a bed! ' Trailers 38' to 42 24' Pup! eekly Ask t..W . ou b A Rentals! Drop by the office during Ag Expo and sign up for our Henry Rifle Raffle! SO RARE! '03 FREIGHTLINER COLUMBIA's, no EPA, Detroit, 290K-350K-miles, 12.7L @ 500-hp,13-spd, 3:91 ratio, 160" WB, 13,200 lb front, 23,000-lb rear, local fleet, choose from 2, ea .......... $28,900 '08 KENWORTH T800, Cat 470-hp, 13-spd, low miles 337K, 3:90 ratio, Flex Air suspension ......$54,600 IFT! AUTO-SH '00 KENWORTH W-900, 500-hp, N-14,18-spd auto shift, drop axle, rear locker, we want your trade! ..CALL 40-ft.'s & STEPDECKS IN STOCK! AN! VERY CLE '90 IH 8200, Cummins Big Cam 350, 9-spd, spring suspension, 3:42 ratio, 160" WB ..................... $ 12,900 '87 FORD L8000, Service/Crane truck, diesel, 10-spd, PTO, 38,221-miles, Gormach 7-ton crane ........ $ 14,900 HOBBS GRAIN TRAILER, 20' bed, twin hydraulic cylinder, Maxi-brakes both axles, 52" racks CALL CLASS 8 TRUCKS Spokane, WA (509) 534-9088 Spotlight On Economics: Byproduct Exports Important To Cattle Prices By Tim Petry, Exten. Livestock Marketing Economist, NDSU Agribusiness & Applied Economics Dept. The USDA’s Agricultural Marketing The importance of U.S. beef exports to the U.S. cattle markets has been well- Service (AMS) publishes a daily “USDA documented. Beef exports on a value basis Byproduct Drop Value” report for fed cattle. set a record high in 2014, and so did beef It is available at http://www.ams.usda.gov/ byproducts. Beef byproducts are less glam- mnreports/nw_ls441.txt. The AMS reports the quantity, price and orous, so their importance sometimes gets overlooked by cattle producers. However, value for a number of the most important bythe value of byproducts, sometimes referred products for a typical 1,375-pound steer and to as “offal or drop value,” also plays an a combined steer and heifer (1,300 pounds) category. Values are reported on a per hunimportant role in cattle prices. Beef byproducts include all edible and dredweight live basis. As I write this article, inedible items from harvested cattle that are the byproduct value for a 1,375-pound steer not part of the dressed carcass. The hide is was quoted at $16.24 per hundredweight, or the most valuable byproduct and usually $223.30 per head. AMS reported the market accounts for about one-half of the total value of an average live steer at $167 per byproduct value. Other beef byproducts hundredweight, so byproducts amounted to include items such as tallow, livers, hearts, about 10 percent of the steer’s value. Values of selected byproduct items included tongues, oxtails, tripe (stomach) and meat the steer hide at $7.82 per hundredweight and bone meal. Edible byproducts often are referred to ($107.53 per head), tongues and oxtail at 96 as “variety meats.” Inedible byproducts are cents per hundredweight ($13.20 per head), used for a wide variety of pharmaceutical, meat and bone meal at 78 cents per hundredcosmetic, household and industrial products. weight ($10.73 per head), livers at 58 cents per Values for individual beef byproduct hundredweight ($7.98 per head) and hearts at items are influenced by many fundamental 37 cents per hundredweight ($5.09 per head). AMS also issues a weekly “USDA Bysupply and demand factors. Export demand is especially important because the amount product Drop Value Cow” report. It is availof U.S. byproducts produced is large, com- able at http://www.ams.usda.gov/mnreports/ nw_ls444.txt. The report lists the quantity, pared with domestic demand. For example, many hides are exported price and value for important byproducts from to overseas customers to be processed into a typical 1,100-pound cow. When I wrote this leather and leather products, so economic article, the cow byproduct value was estimated conditions around the world and the value at $15.22 per hundredweight, or $167.42 per of the U.S. dollar relative to other currencies head. A 1,100- pound cow selling for $115 per impact byproduct values. Strong economies, hundredweight would have a market value of with robust automobile and leather clothing $1,265, so the byproducts would amount to sales, certainly help the demand for leather. about 13 percent of the cow’s value. Fed-steer byproduct values increased to Tastes and preferences for traditional beef cuts and variety meats differ throughout record high levels in the first part of 2008 the world. Fortunately, unlike many U.S. ($12 per hundredweight). However, the U.S. consumers, some foreign customers prefer and world economic crisis sent values plumvariety meats such as livers, hearts and tripe. meting to $6 per hundredweight by the end For example, tongues are popular in of 2008. Values began improving in late 2009 Japan. In some countries, particular variety as economic conditions improved. Gradual meats are preferred over traditional meat improvement throughout 2010 resulted in cuts and even used for medicinal purposes. record high values again at more than $12 by In other countries, a variety meat may be a year’s end. Continued gradual improvement, cheaper source of protein for lower-income fueled by strong export demand, has resulted in the current record high values of more than consumers. The U.S. Department of Agriculture’s $16 per hundredweight. Supply and demand factors will affect beef Economic Research Service published a much more in-depth explanation on the uses byproduct values in 2015. Projected lower of byproducts. “Where’s the (Not) Meat? U.S. fed-cattle and cow slaughter, and conByproducts From Beef and Pork Produc- tinued strong export demand, should support tion” is available at http://www.ers.usda. byproduct values at near record levels again in 2015. gov/media/147867/ldpm20901.pdf. January 2015, “The Growers’ Guide” Page C5 Bull Test continued from page C2 Cattlemen Association office at (509) 925-9871, email: [email protected] or Sale Manager: Kendall Cattle Sales, 1040 Kendall Road, Potlatch, Idaho 83855, (208) 858-2163, email: [email protected]. ANGUS (ADG-3.26, WDA-3.26) There are 73 Angus bulls on test this year. Of this group, 13 of these bulls are presently gaining 4 pounds per day or better. They are led by a January 5th son of BAR 22 Soul 946, consigned by JSL Angus of Madras, OR that posted a 6.12 ADG for the first 60 days. He is followed by a January 17th son of Eshelman’s Shooter J65/PEN consigned by McCall Angus of Endicott, WA. He posted a 5.04 ADG with a 3.89 WDA and is presently the heaviest bull of all breeds weighing 1350 lbs. The next highest ADG of 4.70 lbs. was a January 13th son of JSL Bon View Brutus 506 consigned by JSL Angus of Madras, OR. He was followed by a January 1st son of TC Thunder 805 consigned by West Brook Angus of Chimacum, WA that is gaining 4.66 lbs. a day. A February 21st son of Rock’n D Dateline 152 consigned by Dynamite farms of Brownsville, OR tied with McCall Angus for the top WDA of 3.89. They were followed by a February 21st son of Coleman Regis 904 consigned by Eshelman Angus of Centerville, WA. HEREFORDS (ADG-3.01, WDA-3.18) The 21 horned and 12 polled Hereford bulls were led by a horned March 7th son of NJW 98S R117 Ribeye 88X ET consigned by Rocking K Ranch of Salem, OR that is gaining 4.09 lbs. per day. Also gaining 4.09 ADG is a horned January 30th son of HH Advance 1069Y ET consigned by Hagen cattle Co. of Chewelah, WA. He is followed by a February 10th polled son of NJW 98S R117 Ribeye 88X ET consigned by Hacklin Hereford Ranch of Redmond, OR that posted a 4.01 ADG. The top WDA of 3.82 was posted by a March 5th horned son of NJW 98S R117 Ribeye 88X ET consigned by Rocking K Ranch of Salem, OR. The second highest WDA was posted by a January 5th son of H5 9131 Domino 2185 consigned by CX Ranch of Pomeroy, WA that posted a WDA of 3.62 lbs. He is the second heaviest bull on test weighing in at 1300 lbs. RED ANGUS (ADG -3.53, WDA -3.28) The 7 Red Angus bulls were led by a January 1st son of Red Brylor Mulberry 9X consigned by Cabernet Red Angus of Pomeroy, WA that is gaining 4.44 lbs. per day. The top WDA of 3.75 lbs. was recorded by a February 1st son of Glacier Cougar 720 also consigned by Cabernet Red Angus of Pomeroy, WA. SIMMENTAL (ADG-3.38, WDA-2.95) The 13 head of Simmental bulls on test are led by a black, polled February 12th son of SVF/NJC Built Right N48 consigned by Starling Simmentals of Auburn, WA that is gaining 4.70 lbs. per day with 3.27 WDA. The second highest ADG of 4.14 lbs. was a polled, black January 12th son of MR NLC Upgrade U8676 also consigned by Starling Simmentals. The top WDA of 3.32 was achieved on a March 10th polled, red son of SVF/NJC Built Right N48 consigned by Burnt Ridge Ranch of Onalaska, WA. The 7 head of SimAngus bulls are led by a polled, black February 16th son of Tex Ambush 9106 consigned by Diamond U Ranch of Addy, WA that gained 3.88 lbs. per day. He was followed by a January 18th black, polled son of Traxs Velocity Y7 consigned by Lightning “h” Ranch of Prescott, WA that has a 3.73 ADG. Topping the WDA of this division are two sons of Ad’s Hoover Dam of 51 consigned by Schriever Simmentals of Mollala, OR. Both are January polled, black bulls posting a WDA of 3.75 lbs W Fred Wexler III Contractor #FREDHH899BO #RCT-31948 WEXLER WAID Contractor TRUCKING (509) 595-0687 • Call today for an estimate! Wexler Trucking Offers Quality Services • Rock Delivery • Grading • Excavation We have a full line of excavation equipment with 25 years of experience in the Pullman and Moscow area. VISIT US AT ! XPO E G A Backed by Kenwood's Wireless NEXEDGE Digital Network ✔ Unlimited Voice & Data ✔ Free Group-Talk Feature ✔ Individual-User Calling ✔ Multi-Site Coverage Standard ✔ Text/Status Messaging ✔ Lone-Worker Alert Mode ✔ Radio Lease Plans Available ✔ GPS Tracking & Dispatching* Deer Park Wilbur Spokane St. Maries Ritzville Colfax *Additional charges apply Radios compatible with Kenwood NX-320 Kenwood NX-820 Industrial Communications 16610 E. Sprague Ave., Spokane Valley, WA 99037 (509) 928-0322 • Toll Free (800) 537-7047 Email: [email protected] eVery used drill in sToCk priCed JD 1820, JD 1895, 43' single disc drill, with JD 1900 3-section cart 35' air drill, with 1910 3-compartment cart, NH3 128,000 $ $ FLEXI-COIL 72,000 $ HAY EQUIPMENT $11,000 SOLD NH 1114, 9'3" discbine .................................................... $7,500 SOLD NH 216, 16' hay rake, hydraulic fold..................................... JD 4895, windrower, 16' power reverse header, conditioner, Ready to go!.................................................................. $45,000 JD 240, 6' disc mower, 3-point .....................................COMING IN JD 466, 4'x5' round baler, wide pickup, PTO ........................ $15,000 JD 446, 4'x4' round baler, wide pickup, 540-PTO.................. $11,000 JD 435, 4'x5' round baler, PTO, Nice!!! .............................. $11,500 JD 346, 14x18 square baler, PTO, Nice!!! ............................. $7,500 TRACTORS '12 JD 9560R, Nicely Equipped! ..................................... $387,000 JD 9520, wheel tractor, PTO, triples.................................. $167,500 '11 JD 8310R, 310-hp, PTO, 3-point .............................. $290,000 JD 8430, PTO, good tires .................................................. $16,500 JD 4430, duals, PTO, cab, 3-point ...................................... $16,500 JD 4850, 192-PTO-hp, 3-point, Nice!!! .............................. $49,500 '06 CAT TH215, tele-handler, diesel engine ....................... $38,000 '83 VERSATILE 835, 855 Cummins, good tires................. $11,500 FORD 5000, loader tractor, gas engine, 3-pt, PTO...................$8,500 155,000 JD 455, 2320, air cart, with Flexi-Coil 5000 33' air drill, anhydrous equipped, Very Nice!!! 10% oFF 35'x7.5", combo drill VERY NICE! 35,000 $ LATE MODEL TRADES 2-JD S670-STS's, Hillco levelers ................................ COMING IN '11 JD 9870-STS, level land, Loaded!!! ........................ $285,000 '11 JD 9770-STS, Hillco sidehill package ........................ $340,000 '09 JD 9770-STS, level land ..................................... COMING IN '08 JD 9770-STS, level land ..................................... COMING IN 2-'01 JD 9750-STS, combines, low hours, ea................. $109,000 '98 CASE IH 2388, combine, 1010-30' header, 2,100 sep-hours, duals, specialty rotor monitor, field ready .. $76,000 JD 9600, level land, 25' header, Nice! ............................... $55,000 JD 9600's, John Rea leveler, Nice Combine!....................... $55,000 2-JD 630D, draper headers, with transport system....FROM $49,000 SEVERAL LATE MODEL JD FLEX-HEADERS, all sizes and models to choose from ....................................... CALL These Combines Are Very Well equipped, CAll For deTAils! TILLAGE EQUIPMENT PHOENIX, 55' rotary harrow, Nice!!! ................................. $11,000 WIL-RICH 2500, 32' field cultivator, tine harrow .................. $9,500 $7,500 AC 1300, 36' cultivator, tine harrow ..................................... SOLD 0% Interest NEZPERCE, ID • GRANGEVILLE, ID 311 Oak Street 118 W. South Street, (800) 343-2355 (800) 753-3373 (208) 937-2402 (208) 983-1730 JD Fianancing On Selected Used Equipment, OAC! Since 1977 & going strong! For Up To 12 Months January 2015, “The Growers’ Guide” Page C6 JTI, YOUR PARTS HEADQUARTERS Chrome Alloy Wear Parts Ag, HeAvy Duty & Automotive JONES TRUCK & IMPLEMENT Colfax, Washington, Located on Highway 26 (509) 397-4371 Auto, Truck & Pickup Parts WA, ID, OR: 1-800-831-0896 Our People Make The… PARTS Hand Tools Difference SEATS! SEATS! SEATS! SERVICE Complete Suspension Seat, #B94850 89267 $ Cloth Seat, #B93675 Casey Jones Eric Jones 28300 $ Steve DeFord Vinyl Seat, #B93674 SAVE! SAVE! 27000 $ Utility Seat, #B94115 Utility Seat, #B94342 7875 $ Greg Mayer Service Manager 11042 $ Utility Seat, #B94117 5575 $ Dale Kramlich SAVE! SAVE! Andy Bietz Mechanical Suspension, #B93676 Air Suspension, #B93677 Gene Pfeifer 37671 $ 32200 $ EARTH METAL Ryan Stolz SUPER SHARP EDGE Nic Mayer Earth Metal, 22" disk blade, Part No. 87618068 4425 $ Derek Starrett Jim Gordon Bob Manderscheid Earth Metal, 20" disk blade, Part No. 87618056 3600 $ Larry Peringer CASE IH SWEEPS CIH Sweep, #1547095C2, Size 4.5 $ 26 CIH Sweep, #1547097C2, Size 7.5 $ 19 9 8 CIH Sweep, #1547098C2, Size 9 $ 86 CIH Sweep, #1547099C2, Size 10.5 $ 28 CIH Sweep, 52 #1547100C2, Size 12 $ 8 9 12 TRANSITION CONES & VANES Vane Kit, 40/60 Size, Stainless $ 84 Steel Vanes, Part No. 321933A1 ..... 651 Vane Kit, 80 Size, Stainless $ 00 Steel Vanes, Part No. 428875A2 ..... 702 Part No. Description Size Price B92770........Transition Cone (Heavy-Duty with Vanes).........................40-60 ..... $2,12000 B94842........Transition Cone (Heavy-Duty with Stainless Steel Vanes)....40-60 ..... $2,24033 428878A1 ....Transition Cone (Heavy-Duty with Stainless Steel Vanes)....80 .......... $2,06000 B93194........Vane Kit (with Standard Hardware) ................................80 .......... $26300 Cone kits come complete with vanes installed. Hardware available with wear resistant coating. JONES TRUCK & IMPLEMENT Terry Cochran Rick Rounds Mark Appel Justin Vandenbark Website: www.jtii.com • E-mail: [email protected] Walla Walla Highway • Colfax, WA 99111 Phone (509) 397-4371 • WA, ID, OR 1-800-831-0896 Brandon Jorgensen Charlie Chappell IRS Pension Update: New Limits For 2015 By Jason Alderman, Financial Expert, Director of Practical Money Skills for Life Is it ever too late to plan for retirement? No, as long as you’re willing to be thrifty and extend your working years and be mindful of your individual and employer-based retirement savings options. Building a successful, comfortable retirement depends on a variety of individual factors, including where you live, how long you plan to work, your health and your other investments and assets. The IRS recently announced an update for your options, including cost-of-living adjustments that will give many taxpayers the advantage of putting more away during 2015. Here’s a summary: • Regular contribution limits for 401(k), 403(b), most 457 plans, and the federal employee Thrift Savings Plan. Increased from $17,500 (for tax year 2014) to $18,000 (for tax year 2015). The catch-up contribution limit for employees aged 50 in these plans is increased from $5,500 to $6,000. Contribution deadline: Dec. 31. • Annual contribution limits, Individual Retirement Accounts (IRA). For both traditional and Roth IRAs, the annual contribution limit is not subject to a cost-of-living adjustment and remains at $5,500. The over-50 catch-up contribution amount is $1,000. There are particular restrictions (http:// www.irs.gov/publications/p590/index.html) based on income levels, workplace retirement plan coverage among other issues. Contribution deadline: April 15. • Higher 2015 income phase-out levels for traditional IRA contributions. For singles covered by a workplace retirement plan, the 2015 cutoff is now increased to a modified adjusted gross income (AGI) between $61,000 and $71,000. The IRS website details other significant increases and updates in phase-out levels for married couples and singles. • Higher 2015 income phase-out levels for Roth IRA contributions. The IRS website also updates higher phaseout levels for married and single taxpayers on its website. For married couples filing jointly, the 2015 level is now $183,000 to $193,000. Here’s what you can do if you’re in your 50s and you haven’t yet saved much for retirement: • Get qualified financial advice. Organizations such as the Association for Financial Counseling Planning and Education (http://members.afcpe.org/search), Certified Financial Planner Board of Standards list qualified financial advisors, and your state CPA society can suggest tax professionals in your area. • Budget and downsize. Want to retire? Start living like a retiree while you’re still working. Most experts believe late starters (50 and over) need to put away at least 10 percent of gross income to start making headway. Create a realistic budget, trim debt and consider cheaper housing, transportation and lifestyle options. • Take advantage of “catch-up” contribution limits. Retirement savers over the age of 50 have the option to put more away not only in traditional and Roth IRAs but also 401(k) plans ‘Äì not including SIMPLE 401(k)s, 403(b) plans, SARSEP and 457(b) plans (see Annual contribution limits, IRAs above). • Keep working strategically. If you’re lucky, you love your work or are in a position to change careers to one with better retirement savings options. If so, consult an expert on ways to keep earning and investing effectively. Bottom line: The government’s cost-of-living adjustments will allow you to save more for retirement in 2015, but don’t wait until then to evaluate your goals to set—or reset—your retirement planning going forward. Jason Alderman directs Visa’s financial education programs. To Follow Jason Alderman on Twitter: www.twitter. com/PracticalMoney. January 2015, “The Growers’ Guide” Page C7 2015 Annual Lock Maintenance Closure Schedule Reprinted from OWGL’s “Oregon Wheat Newletter” The March maintenance closure for Columbia Snake River System inland navigation projects has been released. Annual maintenance, inspection and repair work will take place at the eight locks during this time. Details can be found below: Project Closes Reopens Bonneville 6:00 a.m. 3- 7-15 11:59 p.m. 3-21-15 The Dalles 6:00 a.m. 3- 7-15 11:59 p.m. 3-21-15 John Day 6:00 a.m. 3- 7-15 11:59 p.m. 3-21-15 McNary 6:00 a.m. 3- 7-15 11:59 p.m. 4-4-15 Ice Harbor 6:00 a.m. 3- 7-15 11:59 p.m. 4-4-15 Lower Monumental 6:00 a.m. 3- 7-15 11:59 p.m. 4-4-15 Little Goose 6:00 a.m. 3- 7-15 11:59 p.m. 4-4-15 Lower Granite6:00 a.m. 3- 7-15 11:59 p.m. 4-4-15 PNWA is currently working with the Corps to schedule tours at McNary and The Dalles during the closure, and we will release details once dates are finalized. R e p r i n t e d f ro m P a c i f i c N W Wa t e r w a y s ’ Nor’wester, 12/10/14 Jamie Sasser - Parts Jim Wagner - Parts Bruce Johnson - Mgr. Ray Steele - Sales Our Strength IS Our PeOPle! e Sam Worth - Parts s Bob Paladeni - Parts ✔ rt a P Brice Green - Parts ic v r e ✔S les Daniel Salizar - Service Sandy Smith - Parts Nick Anderson - Parts Jake McNeil - Service Anthony Perelez - Service JONES TRUCK & IMPLEMENT 304 N. 9th, Walla Walla, Washington Website: www.jtii.com • E-mail: [email protected] Evenings: Nick Lyons Mobile (509) 540-0058 • Ray Steele Mobile (509) 540-9009 Terry Largent (208) 875-0935 Mobile (509) 336-1344 Dan Helbling (208) 882-0200 Mobile (509) 336-1346 Bob Kerns (509) 336-1342 “JTI, Your AgrIculTurAl Hub of THe InlAnd empIre ” We provide the Inland Empire with excellent products including grain bins, legs, grain handling systems including augers. We also fabricate truck beds, truck boxes, drill fills and custom equipment. Our repair services also include grain trailers and auger reflighting. ORDER NOW FOR SPRING! BED, BOX & HOIST Bill Stout: (509) 597-7065 Email: [email protected] Justin Stout: (509) 597-7064 Email: [email protected] 420 28th St. N. #13, Lewiston, Idaho Purch a , bed se a comp & we' grain lete l l u pgra box kit, & man u SPECIAL hoist de al at n tarp to from o ex pow tra cost er ! CUSTOM FABRICATION Truck beds & grain boxes with hydraulic plumbing & the special features you like! Standard Features: • Poly Cup Flighting • Multiple Discharge Spout Length Options • Wireless Remote On & Off Control • Hydraulic Fold • Remove and Install In About 5 Minutes * Programs subject to change without notice. (509) 525-6620 • TOLL FREE 1-800-525-6620 LLC Tailgate Mount Seed Augers Eric Stanger - Service a ✔S FAB-MECH 8" Nick Lyons - Sales Winter Combine Maintenance UHM Wearshoes Its slick surface dramatically reduces friction and wear Excellent for vertical unload and tank fill applications. Available for nearly all auger applications: • Combines • Transport Augers • Bank-Out Wagons January 2015, “The Growers’ Guide” Page C8 MSU Research On The Optics Of Yellowstone Thermal Springs HZ & IH 150 DRILLS Better Than New Since 1970 www.barnesweldinginc.com The Rebuilding Specialists (509) 745-8588 Waterville, WA FOR SALE JD 7520, with PTO & new 23.1/30 tires, 10,000 $ Call Randy • (509) 953-6956 Moore Farms Custom Combining ★ Year Around Grain Hauling Available “Maximizing Your Profits” ★ Can Cut With You Or For You ★ Competitive Rates, Call For Quotes Scott & Kim Moore P.O. Box 547, Kahlotus, WA 99335 Home: (509) 282-3416 Scott Cell: (509) 539-8067 Dick & Melette Moore (509) 282-3384 208-507-0187 By MSU News Service and Newswise Researchers with Montana State Uni- has ever undertaken. Meanwhile, MSU’s versity’s College of Engineering have used optical science and engineering researchers optical technology to create a simple math- have pushed the envelope of how we can ematical model to explain how temperature measure of our world with laser and thermal and chemical composition in Yellowstone’s imaging technology. It is exciting to see the thermal springs combine to give them their two disciplines overlap.” Yellowstone National Park is a geothermal amazing colors. The model can be used to wonderland, with Grand Prismatic Spring and visually recreate how the springs appeared years ago, before decades of contamination its neighbors acting as envoys, steaming in from make-a-wish coins and other man- front of visitors’ cameras and often gracing the internet with their ethereal beauty. While made detritus. the basic physical phenomena that render A paper authored by Joe Shaw, professor these colorful delights have long been scienat Montana State University and director of tifically understood—they arise because of the university’s Optical Technology Center, a complicated interplay of underwater vents along with his doctoral student Paul Nugent and lawns of bacteria—no mathematical and visiting German colleague Michael model existed that showed empirically how Vollmer, details the new model and showcases the physical and chemical variables of a pool images of the springs. The paper appeared relate to their optical factors and coalesce in recently in the journal Applied Optics, which the unique, stunning fashion that they do. is published by the Optical Society (OSA). “What we were able to show is that you “This is a paper that showcases MSU’s really don’t have to get terribly complex— strength in optical science with the locally you can explain some very beautiful things interesting application of better understand- with relatively simple models,” Shaw said. ing Yellowstone’s hot springs,” Shaw said. Using a relatively simple one-dimensional “Researchers at MSU have explored Yellow- model for light propagation, the group was stone’s thermal pools for decades, bringing able to reproduce the brilliant colors and optius historic scientific discoveries and some cal characteristics of Yellowstone National of the most important lines of inquiry MSU continued on page C9 HARROW Add flexibility to your farming operation with a flexible spike tooth harrow from AC Harrow Adjustable Universal Harrow Hangers 3 or 4 Bar Harrows Available Upon Request 4, 5, and 6 Foot Widths Available AC Harrow manufactures the same design as the Hillco harrow. AC Harrow 91 Whitetail Dr, Grangeville, Idaho [email protected] 208-507-0187 USCA Opposes Argentina Beef Imports U.S. Cattlemen’s Association The United States Cattlemen’s Association (USCA) issued comments this week opposing the proposed importation of beef products from Northern Argentina. The U.S. Department of Agriculture (USDA) Animal Health and Plant Inspection Services (APHIS) issued a notice on August 29th that would allow regions in Northern Argentina to resume imports of beef products into the U.S. USCA’s comments focused on the ongoing concerns of Foot and Mouth Disease (FMD) in the country and surrounding region. USCA President Danni Beer, Keldron, South Dakota, commented on the proposed notice, “USCA firmly believes that the USDA-APHIS needs to take a step back from this proposed notice and consider the potential ramifications such action could have on the U.S. cattle industry.” “The health of the U.S. cattle herd is USCA’s primary concern. The U.S. has maintained a status of FMD-free by the World Health Organization for decades; to put this status and the safety of our herd in jeopardy requires an in-depth and lengthy process, focused on producer and industry input. U.S. producers do not take the issue of FMD lightly and neither should the Administration.” USCA’s comments focused on the proposed region’s proximity to areas within Argentina and South America still known to have FMD in addition to concerns regarding the impact of wildlife and the current protocol utilized by Northern Argentina for the detection and management of the virus. As stated in USCA’s comments, Argentina has had multiple detected cases of FMD since 2000 and “Every safeguard and prevention measure must be firmly in place before any discussions should be initiated regarding trade with a region or continent known to have FMD.” Beer concluded, “The health of our country’s cattle herd is not worth the risk of opening trade with this region. USCA has requested the USDA-APHIS to reconsider the proposed notice for trade with Northern Argentina and will continue to oppose any action taken on this issue before industry concerns are properly addressed.” January 2015, “The Growers’ Guide” Page C9 Optics continued from page C8 Park’s hot springs by accounting for each pool’s spectral reflection due to microbial mats, their optical absorption and scattering of water and the incident solar and diffuse skylight conditions present when measurements were taken. “When we started the study, it was clear we were just doing it for fun,” Vollmer said. But they quickly discovered there was very little in the scientific literature on the subject. That’s when things got interesting. In the summer of 2012, Vollmer, on sabbatical from the Brandenburg University of Applied Sciences, travelled with Shaw and Nugent to the park. Using handheld spectrometers, digital SLR cameras for visible images and infrared thermal imaging cameras for non-contact measurement of the water temperatures, the group took measurements at a number of pools in Yellowstone, including Morning Glory Pool, Sapphire Pool and Grand Prismatic Spring. Using these data, along with previously available information about the physical dimensions of the pools, they were able to create a simple model whose renderings of the pools were strikingly similar to actual photographs. In the case of Morning Glory Pool, they were even able to simulate what the pool once looked like between the 1880’Äôs and 1940’Äôs, when its temperatures were significantly higher. During this time, its waters appeared a uniform deep blue. An accumulation of coins, trash and rocks over the intervening decades has partially obscured the underwater vent, lowering the pool’s overall temperature and shifting its appearance to a terrace of orange-yellow-green. This change from blue was demonstrated to result from the change in composition of the microbial mats, as a result of the lower water temperature. A general relationship between shallow water temperature (hence microbial mat composition) and observed colors was confirmed in this study. However, color patterns observed in deeper segments of the pool are caused more by absorption and scattering of light in the water. These characteristics— mats having greater effect on color in shallow water, and absorption and scattering winning out in the deeper areas—are consistent across all the measured pools. “Our paper describes a very simple, one-dimensional model, that gives the first clue if you really want to do more,” Vollmer said. “We didn’t start this project as experts on thermal pools,” Shaw said. “We started this project as experts on optical phenomena and imaging, and so we had a lot to learn.” “There are people at my university who are world experts in the biological side of what’s going on in the pools,” Shaw said. “They’re looking for ways to monitor changes in the biology— when the biology changes, that causes color changes— so we’re actually looking at possibilities of collaborating in the future.” Nugent, Vollmer and Shaw are continuing their research, delving further into infrared imaging at Yellowstone National Park. R ENTAL TRUCKS NOW AVAILABLE! 2010 JD 1890, no-till drill, 30' wide on 10" spacing, only 7,000 total acres, near new disc openers, dual flotation tires, extended wear seed boots, hydraulic wing down pressure. Unit is in "like new" condition .......... $ cing Finan le! ab Avail 69,950 2003 FLEXI-COIL 2340, Both items stored inside and well kept! Call Joshua Jones: (208) OFFICERS 835-4106 • Cell (208) 874-3023 COVERAGE 2 mills ($2.00 per $1,000) ✔ $225,000 maximum per policy ✔ Maximum $2500 housing allowance for $5.00/year ✔ All non-motorized farm machinery ✔ Lake houses if farm buildings are insured with FBA. EXECUTIVE COMMITTEE Ben Wolf, Uniontown, WA Glenn Leitz, Fairfield, WA FBA PRE-EMISSIONS (No Regen) ‘07 IH 7400, 6x6, HT-570 engine, cab & chassis .......................... $95,860 NEW IH CF600, with box and lift-gate ..CALL ‘96 IH 9400, DD series 60, 365/430-hp, drop axles available............................CALL IH 4300, Detroit @ 430-hp, needs diff$8,500 IH 2050, diesel, 22' bed, cattle racks.....CALL IH S-1900, DT-466, 12,000-F.A., 23,000-R.A., tractor only ............ $14,000 IH S-1900, DT-466 engine ...................... CALL IH 1800 LOADSTAR, tandem axle ..IN SOON IH 1700, single axle, 16' bed & hoist ....$7,500 Here, If You Like Your Fire Insurance. You Can Keep It! Cat, C LEVEL LAND CUMMINS 855 TILLAGE CASE IH 6650, 11'3"/13'5" Combo Mulcher (chisel chopper), highest pressure trips .$14,900 GLENCOE, 20' Combo Mulch Finisher, mulcher baskets, new disc blades ...$11,985 CASE IH 145, 4-bottom rollover plow, auto reset, new shins, shears, trash plates & pivot bushing ..... $10,623 TOWNER, 18' disk, 25" blades, 4¼ to 4½ depth bands .............. $10,000 IH 800, 12-bottom flex plow, needs workCALL CALKINS, 32' cultivator, with hyds ..... $3,800 5-IH 80, 10½' rodweeders, with hitch $9,000 STERLING, 18' – 30' packers...............CALL 20+ ADDITIONAL TILLAGE ITEMS! 1270-hours, 200-hrs on chrome .. $35,000 ADD CHOICE OF HEADERS: R27 & R30’s with air reels, R27 with Love pickup reel, ea .. $4,800 HILLSIDE 2-IH 1470, combines, 1983 & 1982 ... CALL IH 453’s, C/A, catwalks, gas/diesel, from $3,000 CORN & PICKUP HEADERS CASE IH, 12-row cornhead, 22" .......$25,000 MF 1163, fits Axial Flow, 6-row, 30" . $6,500 IH 810, pickup,13' with 9' twin belt.......CALL CASE IH 1010 & 1015, platforms......CALL VARIOUS SIZES, grain & pickup headers CALL HAY & MISC. CASE IH 8580, 4x4 Big Baler, needs work ............................ $39,000 LA FORGE, 3-point floating hitches, front mount..................... NEW! $7,000 USED HITCHES, from....................... $3,500 DRILLS 3-IH 510, 21x7" grass seeders, hitch.....CALL 4-IH 150, 14x10" hoe, cast boot, hitch$12,000 4-IH 150, 10x10" hoe, steel boot, hitch$11,500 3-MELROE, 10'x6" drills, transport .... $7,500 IN-LINE 6-CYL: IH D & DT360, . CALL IH DT414, ......... CALL IH D & DT691, . CALL DETROIT 6-71, . CALL Ove Ki s, IH/ ts Ava rhaul Navist ar, JD ilable , Case ! & Mo re ummin ENGINES ‘94 CASE IH 1688, combine ..............CALL ‘89 GLEANER R60, Fraternal Beneficial Association of Eastern Washington and Idaho NT series 6x6 509-229-3611 509-523-2872 Office: 22919 S. North Kentuck Trails Rd. • Fairfield, WA 99012 Office: 509-928-0393 • Fax: 509-928-0393 Cell: 509-993-6220 • e-mail: [email protected] PRESIDENT: Joe Schmitz, Spring Valley, WA 509-523-5401 1st VICE PRES.: Lawrence "Dave" Baumgartner, Genesee, ID 208-285-1177 2nd VICE PRES.: Tom Solbrack, Colfax/Rosalia, WA 509-397-3641 TREASURER: David Buob, Edwall, WA 509-257-2871 SECRETARY: Linda Flaig, Spokane Valley, WA 509-993-6220 [email protected] Cell 509-993-6220 ASSIST. SECRETARY: Sharon McCoy, Coeur d'Alene, ID 208-664-9400 ‘90 CASE IH 1680, 1010-25' header, long sieve, Cummins .... $60,000 ‘86 CASE IH 1660, ...........................CALL ‘83 IH 1480, clean, overhauled engine, chromed ...........................................CALL IH 1460, combine................................CALL ‘81 CASE IH 1480, clean, 2450-hours CALL 89,950 Rural Fire Insurance and Smoke Damage APPRAISERS Lawrence "Dave" Baumgartner Home 208-285-1177 e-mail: [email protected] Genesee, ID Cell 509-330-0199 David Buob 509-257-2817 e-mail: [email protected] Edwall, WA Cell 509-368-4834 Mardy Fisher 208-682-3121 e-mail: [email protected] Cataldo, ID Cell 208-660-9300 Libke Insurance Assoc., Inc 509-647-5761 Gil Hanson or Casey Haden Wilbur, WA 800-404-5761 e-mail: [email protected] FAX 509-647-2042 Tim Hahner 509-283-2387 e-mail: [email protected] Fairfield, WA Cell 509-435-5446 Sharon McCoy 208-664-9400 e-mail: [email protected] d'Alene, ID Cell 208-818-4496 Peggy Miller 509-725-0383 e-mail: [email protected] Davenport, WA Cell 509-721-0135 Paul Schmidt Mansfield, WA 509-683-1040 Joe Schmitz 509-523-5401 e-mail: [email protected] Spring Valley, WA Cell 509-868-2983 Tom Solbrack Rosalia/Colfax, WA 509-397-3641 e-mail: [email protected] Cell 509-868-1871 Ben Wolf 509-229-3611 e-mail: [email protected] Uniontown, WA Cell 509-432-1054 commodity air cart, tow-between, hyd/electric variable rate metering, 235-bu capacity (60-40 split), extra meter rolls for canola/fertilizer/ garbs, etc., blockage monitoring system, 8" fill auger, dual fan, very nice condition! Available with the above drill as a Package Unit for $ DT466 IH CUMMINS, 8.3L .......CALL CUMMINS 220, ............ CALL CASE 504BDTA, ............ CALL IH D-301, in-line 6, diesel CALL IH C-301, in-line 6, gas .... CALL IH 345-V8, gas .............. CALL IH 392-V8, gas .............. CALL IN-LINE 4-CYL: IH D-206, ......... CALL IH D-239, ......... CALL IH D or DT460, CALL Rebuild With Break-In & Dyno Available, 1 To 2 Year Warranty, Call! COMBINE PARTS 30.5L32 COMBINE WHEEL, 27x32” wheel only, #37593053 . $94864 GRAIN SIEVES, #1319093C6 ............ $98170 CHROMED RETURN ELEVATOR BOOT, 1480, 1680, 1688 & 2188 series, #183160C1C..........................$29444 CLEAN GRAIN ELEVATOR, for 40 60, 66 & 70 series, #1317376C9 ... $1,15584 TAILINGS ELEVATOR, for 40, 60, 66 & 70 series, #191778C2 ..... $1,04238 CRAWLERS CAT D5-98J, with dozer, Was $22,500 ............ NOW $19,500 IH TD-20E, direct drive, powershift, OB planetary steering ......................... $50,000 IH TD-18, fresh U/C, dozer available . $17,500 IH TD-15, 150 Series ..........................CALL IH TD-182, with hydraulic engine assist, and cable dozer .................................. $14,500 IH TD-14A, rebuilt 18 series engine, hydraulic dozer ...........................$14,500 IH TD-14A, 400-hrs on engine overhaul$8,350 CHAIN, 54” feederhouse, smooth slat, for 80/88 series, #117872A1 495 $ 65 FIELD TRACKER 88 Series 4,514 $ T R A C T O R S JD 4640, 7723-hrs, 3-point, 3-remotes, PTO, PowerShift, duals available ....$23,300 2-CASE 4890, 4WD's, 3-pt, PTO, duals available, reconditioned price .$28,000 IH 6788, tractor, needs work ................CALL IH 584, MFD, with loader, needs work ....CALL STEIGER ST270, tractor, needs work.....CALL STEIGER SUPER WILDCAT II, Cat 3160$8,500 LOOMIS TRUCK & TRACTOR Evenings: Wes Loomis (509) 650-7242 Lind, WA • (509) 677-3449 January 2015, “The Growers’ Guide” Page C10 WSDA’s Bridging The GAPs Farm Guide DISTRIBUTED BY: ELLIS Equipment Co – Western USA (800) 949-2336 • www.ellisequipment.com Diesel & Machine, Inc – Lewiston, ID (208) 743-7171 • www.dieselandmachine.com Contact us for a dealer near you From Tilth Producers of Washington WSDA is pleased to announce a new resource to assist growers with Good Agricultural Practices (GAPs): The Bridging the GAPs Farm Guide—Good Agricultural Practices and On-Farm Food Safety for Small, Mid-Sized, and Diversified Fruit and Vegetable Farms. The guide is part of WSDA’s Bridging the GAPs project, which focuses on communicating effective food safety strategies, providing information on regulatory changes, and sharing marketplace guidance for small, mid-sized and diversified farms. The guide captures lessons learned from the project team’s outreach and education—including farm walks, GAP auditor trainings, survey work, and industry engagement. The guide is free, either in print or for download in English and in Spanish. You’ll find detailed descriptions of Good Agricultural Practices arranged sequentially to follow the order of the USDA GAP/GHP Audit Checklist—which an auditor would follow during the on-farm portion of a GAP audit. With food safety top of mind for much of the food system, the time is right to bring more guidance and more information on this important topic for small, mid-sized and diversified farms. Look for: • Tips from WSDA GAP Auditors • On-Farm Examples • Examples of low-cost solutions to common on-farm food safety risks • Easy-to-use forms for developing your farm’s Standard Operating Procedures (SOPs) • Fillable templates to help with writing a Food Safety Plan • A thumb drive with web-based links, and detailed information on key issues such as water quality, and the Food Safety Modernization Act (FSMA) In addition to electronic download, you may also pick up a guide at the following events, or email to arrange to pick one up at a WSDA regional office! Washington State Farmers Market Association Conference (Feb 6-8 in Olympia, WA) Pierce County Farm Forum (Feb 27 in Puyallup, WA) San Jan Agriculture Summit (Feb 27-28 on Lopez Island) A Great Place To Advertise... SUBSCRIPTION FORM PRODUCERS If you live in these counties, then you can get The Growers’ Guide FREE. Washington: Adams, Asotin, Benton, Columbia, Douglas, Ferry, Franklin, Garfield, Grant, Kittitas, Klickitat, Lincoln, Okanogan, Spokane, Stevens, Walla Walla, Whitman, and Yakima. Idaho: Benewah, Bonner, Boundry, Clearwater, Idaho, Kootenai, Latah, Nez Perce, and Lewis. Oregon: Baker, Gilliam, Grant, Marion, Morrow, Sherman, Umatilla, Union, Wallowa, Wasco. Out of area subscription rates are listed below. (Circle Amount Enclosed) 1 Year 15 $ 2 Years FREE 25 3 Years $33 $ Foreign $48.00 Per Year, U.S. Funds —————————————————— Check One: ❒ New ❒ Renewal ❒ Address Change —————————————————— NAME _____________________________________________ COMPANY NAME ___________________________________ MAILING ADDRESS _________________________________ CITY __________________________ STATE ______________ ZIP ______________ COUNTY ________________________ PHONE _______ –_______ –______________ EMAIL _________________________________ The following is confidential and for our statistical purposes only Acres__________________ Dryland Irrigated Orchard Principal crops_________________________________ Commercial Livestock: Hogs Cattle Sheep Poultry Other____________ Number of Head_______ SIGNATURE ___________________________ Sales tax is included within the subscription price. Bill & Dana Carroll • Phone (509) 397-2191 P.O. Box 306 • Colfax, WA 99111 Or Gift A Friend, Neighbor Or Even A Family Member! Mail: P.O. Box 306, Colfax, WA 99111 Phone: 509-397-2191 Cell: 509-595-1733 FAX: 509-397-6549 Email: [email protected] http://www.growersguide.com The Holly And The Ivy! Not. By Diana Roberts, Regional Extension Specialist, Spokane/Lincoln Counties “Yep, this bush cost me $30,000 this year,” said the barley grower as he stood looking at a good-sized, spiny bush with bright red, oblong berries. No, not holly. You guessed it—common barberry! Doug Falstad first contacted me in August 2007, saying his barley field near Addy in Stevens County, WA, was yielding virtually no grain and clouds of black dust blew up behind the combine as he tried to harvest it. Xianming Chen, rust pathologist with the USDA-ARS in Pullman, pronounced it the worst case of cereal stem rust he’d ever seen. The stem rust pathogen, Puccinia graminis, is unique in that it requires an alternate host, the common barberry, for it to complete its lifecycle. Stem rust can cause 100% yield loss in wheat and barley fields, and is worse when there is rainfall well into the summer months and nights are warm and humid. We seldom experience these conditions in the Inland Northwest, though in 2012 stem rust was found in many spring grain fields in Whitman, Spokane, and Stevens Counties. Outbreaks were common in the early 20th century in many of the northern, wheat growing states across the US. However, the federal government implemented a program to eradicate common barberry plants that had been brought in by settlers, and thus prevent stem rust epidemics. In the 1980s, the eradication effort was deemed successful and the program ended. A few incidences of stem rust similar to Doug Falstad’s indicated that common barberry plants were re-growing in the region or had been missed by the eradication crews. A landowner 15 miles east of Colville reported having common barberry on his land—but that was too far away to affect Falstad’s fields. Doug continued to have problems with stem rust, but we couldn’t find the source. In the fall 2 years ago, he and I even drove to nearby homesteads where records showed the federal teams had eradicated common barberry, but we found nothing. On December 1, 2014, I addressed this topic at a workshop in Stevens County, where another farmer reported reduced grain yield and clouds of black dust this past harvest. I passed out copies of a brand new WSU Extension bulletin, “The Control of Common Barberry to Reduce Stem Rust of Wheat and Barley” http://cru.cahe.wsu.edu/CEPublications/ FS151E/FS151E.pdf. Later that week came a text message from Doug and a photo “is this barberry?” “Looks like it to me, where is it?” Bright yellow bark and 3 spines at leaf bases are diagnostic for common barberry plants. “Ummmmmmm, this is embarrassing—my mother’s yard. Never glanced at the thing until today.” “Oh, LOL!” Doug has a great sense of humor and is willing to let others learn from his oversight. But it’s got to hurt—his barley crops in the nearby flats have suffered from stem rust infection most years since 2007. However, that barberry bush has been growing in the Falstad’s yard, about 20 ft from Doug’s boyhood bedroom window, for over 40 years. Why did the problems begin only in 2007? Doug’s mother filled us in on the bush’s history. Her mother-in-law was given a tiny barberry plant by a neighbor who called it a “holy bush” or “crown of thorns” due to its spiny nature. Probably because the plant was small at the time, the site escaped being listed by the eradication crews who visited Stevens County in 1959, 1965, and 1974. The bush is growing 10 feet from a field that was in pasture “forever” until Doug converted it to annual barley production about 5 years ago. A susceptible crop growing in a sub-irrigated flat right beside the pesky barberry bush created a perfect storm of conditions for the stem rust fungus! Once barley in that field was infected, stem rust spores blew easily to other fields nearby. continued on page C11 January 2015, “The Growers’ Guide” Page C11 Moving? Let us know your new address so we can keep The Growers’ Guide coming to you! NuCal LLiquid iquid LLime ime NuCal ● NuCal Liquid Lime Spring a nd F all rops Spring and Fall CCrops ● Spring and Fall Crops CRP CRP ● Round Up ● CRP Custom AAg g SSpraying praying ★ ★ C Call all ffor or RRates ates ttoday! oday! Custom Ben M Moehrle oehrle 5509-‐715-‐7997 09-‐715-‐7997 Ben [email protected] [email protected] T JUS IN NuCal LLiquid iquid LLime ime NuCal Spring a nd F all rops Spring and Fall CCrops CRP CRP NOW ! 500 $ 15, OP H S E H IN T '93 KENWORTH T-800, '05 COLUMBIA , Detroit 60 series Cummins power, 13-speed.Custom ......$15,500 praying ★ C Call all ffor or RRates ates ttoday! oday! Custom AAg g SSpraying ★ '00 KENWORTH T-800, @ 515-hp, 13-spd, Jake, Hendrickson rears, Ben M oehrle 5 09-‐715-‐7997 recent work on Cummins N-14, Jake, axle, 24' bed & Harsh 100 hoist, Ben Mliftoehrle 509-‐715-‐7997 NOW 10-spd, lift axle, long wheel base, fresh in frame, new clutch, fresh paint. [email protected] [email protected] recent engine work ................... JUST IN $ 0 0 5 , 26 NOW $ 0 0 5 , 4 NOW 1 '95 VOLVO, 260-hp, 5-speed Allison automatic, T-ride suspension, low miles, 150" cab/trunion $14,500 '00 CHEV C8500, Cat 3126 @ 300, 8-LL, Hendrickson rears $26,500 '96 MACK, 10-12 yard dump truck, 427-hp, 13-spd, Jake, Camelback rears, low mileage, ex-municipal, super clean! ..................... $ NOW $ 00 5 $ 34, 34,500 0 8,50 1 NOW $ ,500 17 NOW $ 0 0 28,5 '99 STERLING, Cat 3126 @ 300-hp, 9-spd, 120K-miles, Super Clean $17,500 NOW '99 CHEV C7500, ALLISON AUTO, Cat 3126, long wheel base, 45K actual miles...$18,500 Cab/chassis$17,500 NOW '00 STERLING, Cat 3126 @ 300-hp, 8LL trans, Hendrickson rears, 20' all-steel bed, Harsh 70 hoist .............. $28,500 0 NOW $ 0 6,50 '96 FORD L-7000, Cummins 5.9L, 5/2, 14' bed, hoist .................. $11,500 7,500 Allison Auto, truck ............... $ NOW 0 0 11,5 7,50 $ '90 IH DT-466, $ 0 90 $ 16, NOW 00 5 , 2 $1 IH, Allison Auto, 12' commercial bed & hoists, low miles ......... $6,500 12,500 ALLIS CHALMERS D-17, super clean, low hour tractor........ $3,750 Randy's – TRucks & EquipmEnT 509-520-8099 BOBCAT 331, mini-excavator, rubber tracks, new thumb, 3800-hrs $16,900 '91 IH DT-466, $ Allison Auto......................... Walla Walla, WA • Email: [email protected] • Prices subject to change www.randystruck.com January 2015, “The Growers’ Guide” Page C12 Tell our advertisers “I saw it in The Growers’ Guide!” '05 STERLING, Cat C13 @ 380-hp, 10-speed, 27,000 Workman 18' bed, hoist, new slip tank, single axle, A/C, $ Air Ride seat, Air Ride cab, & Air Ride suspension ..................... Economy Truck Sales (509) 525-3322 www.economytrucksales.com [email protected] 2844 Melrose Street • Walla Walla, WA Ivy, Not! continued from page C11 “We were looking for barberry bushes around ‘old homesteads’, but I never really considered our place because it’s still lived in,” said Doug. “In reality, it’s as old as anything else around here.” Doug will destroy that bush early next spring before it has a chance to transmit any stem rust spores. But we agreed that it’s highly likely there are more common barberry bushes out there. “I’m going to grow a different barley variety and apply a fungicide this year,” continued Doug. “I can’t afford any more losses.” Scientists are concerned that the Inland Northwest could be the source of new races of stem rust that develop on barberry plants here and are then blown over the mountains to areas where the pathogen is a more common problem. Common barberry is a Class C Noxious Weed in Washington State, and we ask for landowner help in eradicating it. If you want to know whether your area was In S tock visited by the barberry eradication crews, email your address or GPS coordinates to Tim Murray, WSU Extension Plant Pathologist at [email protected] We have a small supply of Imazapyr herbicide available, while supplies last, for landowners to use if they find barberry on their property. Contact Diana Roberts at robertsd@wsu. edu or 509-477-2167. So before you hang up any more Christmas lights, please look around for any bushes with bright red berries (about 1/2 inch long) masquerading as holly! Additional Information: Control of Common Barberry to Reduce Stem Rust of Wheat and Barley http://cru.cahe.wsu.edu/CEPublications/FS151E/FS151E.pdf Wheat and Small Grains http://smallgrains.wsu.edu, P.O. Box 646420Washington State University, Pullman, WA 99164-6420, 509-335-1719, tel: 509-335-1719, Contact Us @ mailto:[email protected] 5 & R 8' ead 7000 Series Rod Weeders In Stock Ideal Tool To Fertilize and Weed In 1 Operation! y Positive Mechanical Depth Stop On Every Section Infinitely adjustable screw is operator set at any depth for consistent results. Simplified Drive System Reduces the number of moving parts by 2⁄3’s compared to standard drive systems. Hexagon rods with standard reversible replaceable chrome cast points provide longer wear. Morris 3-Bar Harrow In Stock 58' Pulls Like the Competition’s 36'! Automatic Trip Device provides a smooth trip out and return action. Ground rods have a tripping clearance of 20 inches. 11L-15 Dual Wheels are standard equipment on the main frame of 52- and 58-ft. machines to provide excellent flotation and stable, safe transportation. WALTER IMPLEMENT Odessa, WA • (509) 982-2644 • 1-800-572-5939 “The Farm equipmenT SpecialiSTS” Grafting Vegetables Hands-On Workshop Learn how to use the splice-graft technique to graft tomato and watermelon successfully at this workshop on February 20, 2015. Participants will use common rootstocks for each crop and will graft 6 plants of each crop which they can take home to heal ($48 value). All grafting materials will be provided. Participant supply list will be emailed upon registration. Led By: Dr. Carol A. Miles and Patti Kreider, Vegetable Horticulture Program, Department of Horticulture, WSU Date: February 20, 2015; 9 a.m. to 12 p.m. Location: WSU Mount Vernon NWREC, 16650 State Route 536, Mount Vernon, WA 98273 (http:// mtvernon.wsu.edu) Registration: Due by January 28, 2015—$50 per individual; $75 per pair/couple. Late registration—$70 per person. Register at: http:// www.brownpapertickets. com/event/1029695 Space Is Limited! New Year’s Resolutions Are For Pets Too From James P. Judge, BluePearl Media & Public Relations Manager Doctors from ACCES (A BluePearl Veterinary Partners Hospital) encourage you to consider your pet when setting your New Year’s resolutions for 2015. Whether getting back into shape or making that plan to hit the trails, the New Year can signal a fresh start to a healthier routine for pets and owners alike. “Maybe it is time to focus on finally getting that extra weight off your beloved companion,” said Dr. Beth Davidow, ACCES medical director. “Or, perhaps it is time to schedule that long overdue dental. Just remember that you are your pet’s best advocate and change starts with you.” The ACCES medical team recommends the following resolutions for you and your pet in 2015: • Ensure your pet receives an appropriate diet. Weight gain in pets, just like in humans, can increase the risk of diabetes, heart disease and arthritis. If you notice your pet has packed on a few pounds or seems lethargic, schedule an exam with your veterinarian to discuss weight loss. • Schedule an annual exam with your family veterinarian. Even if your pet has never had an illness, these exams are important to establish a good health and can be crucial in detecting emerging disease. For older pets on medications, a yearly exam is an important part of the monitoring process. Anti-inflammatories for arthritis, thyroid supplements, seizure medications, and insulin are some examples of medications that need to be closely monitored. • Try a to be more active with your pet or incorporate more playtime into your routine. Dogs and cats alike need a healthy amount of activity in their daily lives to keep fit and mentally stimulated, and you too will reap the rewards of more exercise. • Keep up on your pet’s grooming needs. Brushing your pet helps keep their coat shiny and healthy while providing a unique opportunity to spend quality time bonding with your pet. Untrimmed nails can be painful for your pet while regularly trimmed nails will protect your clothes and furniture. • Make oral hygiene care with your pet a priority. Dental hygiene is also extremely important. Regular dental cleanings are recommended for both cats and dogs. Some pet owners may be reluctant due to cost and the need for general anesthesia, but the benefits often outweigh the cost. Dental cleanings focus on removing the tartar visible on teeth and can improve the health of gingiva. • Update your pet’s microchip and tags. Time and time again, lost pets brought to the shelter or emergency animal clinic have out of date tags and microchips. Over the course of a year, people move, get new numbers and forget to update their pet’s tags. Updating ID information is the best way to ensure a lost pet makes its way safely home. • Pet proof your home and property. Make sure you know what plants and foods are toxic to your pet and keep those well out of reach. Also, make sure electrical cords, strings and other easy to swallow items are safely secured. For more pet health information and New Year’s goal, visit the ACCES Pet Health Blog at criticalcarevets.com. Groups Asks For Specific Data Related To Predator From Washington Residents Against Wolves In a continuing effort to bring better discussion and attention to the wolf issue in Eastern Washington, Washington Residents Against Wolves (WARAW) has asked the Washington State Fish and Wildlife Department(WDFW) to disclose information crucial to wolf management. “We are very concerned that management of the wolf is becoming a spontaneous affair by WDFW that is not guided by data and is not following the state wolf management plan,” said WARAW spokesman Luke Hedquist. “We believe that real, regionally specific data needs to be used in order for management to be solid.” Data the group is asking for includes ungulate counts for Eastern Washington and the anticipated prey demands of the 12 wolf packs that already inhabit the region. WARAW is concerned that the data in regards to available prey has not been thorough and has not considered the demands of other predators like cougars, bears and coyotes, for instance. “The state wolf management plan notes that predators like cougars have had poor body condition and survival rates in other areas where wolves recolonized, but makes no attempt to determine the prey needs of both species in terms of numbers in Eastern Washington,” Hedquist said. “Without knowing how much prey our current predators like cougars and bears need, how can we be sure there is enough left for wolves? There is just a huge body of data that is missing.” Impacts to ungulate herds and how herd declines will be quantified is also of particular concern to the group. “The state plan says that if ungulates numbers in the state drop below 25 percent of their objective for two years that wolf reductions could be considered, but the way WDFW currently determines populations is on hunter harvest reports,” said Hedquist. “Essentially, that’s counting the dead animals, not the live ones.” continued on page C14 January 2015, “The Growers’ Guide” Page C13 FOR '49 FORD, truck, flathead 6-cylinder engine, runs ..$500 SALE KRAUSE, 24' light disk, on rubber, wing-up ..... $3,000 (509) 843-3595 • Cell (509) 566-7049 PRAIRIE FAB & REPAIR, INC. Welding & Fabricating (208) 983-9166 720 Denver Cemetery Rd., Grangeville, ID 83530 Fax: (208) 983-9516 ★ Custom Truck Beds ★ Custom Water Tanks ★ Bed Mounted Grain Tanks ★ SRT-2 Grain Tarps ★ Harsh Bed Hoists ★ Bridge Mats For Logging Welding RepaiR FoR FaRming, logging & ConstRuCtion equipment AWS Certified • 15-YeArS experienCe BUYING CRAWLERS & TRACTORS STEEL TRACK TRACTOR PARTS AC • IH • CAT: D2 to D7 RUNNING OR NOT! CURRENTLY WRECKING: • 2-JD 8430's & 8630 Tractors • Cat Challenger 65's, A & E, PTO'S Available LOTS OF USED PARTS! • Dozer Blades • PTO's • Attachments • Some New & Lots Of Used Undercarriage IH 1470 COMBINE Complete, or parts! ANTIQUE CAT PARTS Ed Miller • (509) 995-2317 W. 21210 Reed Rd., Cheney, WA 99004 Email: [email protected] January 2015, “The Growers’ Guide” Page C14 Prairie Fare: Beware Of Weight-loss Promises Moving? Let us know your new address so we can keep The Growers’ Guide coming to you! UC O N C C A TONY • CATHY • JESSE SERVING THE NORTHWEST FOR DECADES REPLACEMENT HELICAL & SECTIONAL FLIGHTING Available BIN SYSTEMS • Sweeps • Coupler Boxes • Bin Wells • REPAIR • REBUILD • HARDFACE • Transport Augers • Custom Augers • Reflight Platform Augers GET YOUR COMBINE HEADER IN FOR RE-FLIGHTING! Phone: (509) 534-4460 Fax: (509) 534-4337 Toll Free: 800-847-7782 Email: [email protected] www.accuconofspokane.com 904 N Dyer Road • Spokane, WA 99212 By Julie Garden-Robinson, Food and Nutrition Specialist, NDSU Extension Service I can tell a new year has arrived. Weight- have lost about 66 pounds and kept it off loss advertisements have been flowing at more than five and a half years. us from many directions. Maybe you have How did they lose weight? About 98 noticed ads in newspapers, magazines and percent modified their food intake and 94 on TV or billboards. Ads on my Facebook percent modified their physical activity level. page have clamored for my attention, too. To sustain their weight loss, most continue While at the grocery store, I noticed a to follow a low-calorie diet and they follow magazine cover showcasing slim people hold- some key practices. About 78 percent eat ing their much-too-large “old” pants in front breakfast on a daily basis and 75 percent of them. One night I was an insomniac and weigh themselves weekly so they are able turned on the TV. You guessed it. A celebrity to nip weight gain as it occurs. was talking about a diet product. I flipped Nine out of 10 maintain their weight by exerthe station and the next “infomercial” had cising an hour a day. The fact that they confine more body-slimming promises than the last. their TV viewing to just 10 hours per week Sometimes the weight-loss products catch probably helps with weight management, too. me by surprise. While looking at blenders in Fortunately, many free materials and vida department store the other day, I saw that eos about weight management are available the appliance came with a free slim-down online, but be cautious of the source of the supplement to add to a smoothie. materials. You will encounter as many, if Obviously, diet products are big business, not more, “ads” and misinformation online especially since two out of three people are as you do anywhere. overweight according to national studies. As What if you are not “techie” but you would we know, being overweight is linked with like to read some of this free information? greater risks for chronic diseases such as Chances are you know someone who has diabetes and heart disease. Unfortunately, many weight-loss success Internet access, and most of the materials are stories are short-lived if the dieter has not printable. Public libraries often have techmade a lifestyle change. However, some nology available for community members people are successful at losing weight and to explore, too. For example, the Weight-control Informakeeping it off without any special products. tion Network at http://win.niddk.nih.gov/ has The National Weight Control Registry has tracked successful weight loss since the a wide range of information about weight continued on page C15 mid-1990s. On average, the registry members Predator continued from page C13 '81 MARQUEZ, grain trailer lead, 2 axle, 35'3"x96", 36" pin, '87 PETERBILT 359, Cat 3406B, 13-spd, 425-hp, Pete Air Trac suspension, 11R 24.5 rubber on all aluminum wheels, '86 COUGH, 2 compartment MC 306 AL tank, 4,700-gallon, 3000 front/1700 rear, vapor, scully, bottom load........................... CALL! air pintle hitch, double hopper, spring ride, 11R 24.5 rubber on steel wheels, perch and ladders front & back, 18"x18" swing handle gates, 60" sides. '79 MARQUEZ, pup trailer, 2 axle, 16' hopper/14'6" draw bar, 30'6"x96" spring ride, 11R 24.5 rubber on steel wheels, 18"x18" slide gate, perch & ladders on front & back of the trailer........ CALL! '98 DORSEY, 48"x102" step deck, steel inside frame with combo top, new 255 75R 22.5 tires, new brakes, aluminum wheels, air ride, steel wheels, sliding winches, pop up chainers ................................. '02 IH 9200i '03 KENWORTH T-800, Cummins ISM, 10-spd, 370-hp, Reyco spring suspension, 295 75R 24.5 rubber on all aluminum wheel, 4:11 rear ratio, single right exhaust, single right 110-gallon fuel tank, 2 line wet kit with cooler.............................................................. 3 axle, 161 WB, 96" C/T, steel frame, Cummins ISX, 400-hp, low pro 22.5 rubber, (new drives) all with steel wheels, A/C, cruise, CALL! NEW 10-SPEED CLUTCH!!! ................................................... '84 CLOUGH, non-code stainless steel semi-tanker, 6,000-gallon, 2 compartment, equal split 3000 front/3000 rear, spring suspension, 295 75R 24.5 rubber on all aluminum wheels, stainless steel hyd driven pump belly mounted and manifold in ...................................................... CALL! CALL! CALL! '97 FORD F250, Power Stroke diesel, 4x4, automatic, rubber floor mat, service body with Tommy lift rear gate, hitch package, new tires, Runs Good! ................................... CALL! Mountain Hi truck & EquipMEnt • Darin Harvey, Cell: (509) 520-3401 • Dick Harvey, Cell: (509) 520-3400 • Randy Stober, Cell: (509) 520-3943 P.O. Box 165, Walla Walla 99362 (509) 529-1761 In an effort to encourage the state to start collecting the needed data, WARAW recently sent a letter to WDFW, asking the Department disclose what data is actually available and what is not. WARAW also wants to know why WDFW has not started any of the environmental assessments to determine if wolves can be translocated to other regions of the state in order to satisfy the state recovery goals for wolves. The Wolf Management and Conservation plan calls for 15 breeding pairs in three different regions on the state, but despite growing numbers in Eastern Washington and mounting wolf conflicts, translocation is being ignored. “We all know that the state and federal environmental assessments needed for translocation can take several years and should have been started much sooner,” said Hedquist. “At this point WDFW has not even taken the first step in this direction. It really questions how committed they are to wolf recovery as outlined by the plan.” Hedquist said by pushing for data, translocation and better management WARAW is working to see wolf management transition from “social management” to management driven by facts and reality. “What we know about wolf reintroduction is that it was a purely emotional move driven by sentiment and politics, not by science and data,” said Hedquist. “However, in Washington this just isn’t going to be good enough. We want management based on reality, not feelings. While WDFW has said before that they are ‘socially managing’ wolves, we have to demand more than that. We must pursue data and be realistic about the impacts and the dangers. It’s time for Washingtonians to wake up.” WARAW is composed of citizens concerned about the humane treatment of animals, effective wildlife management, private property rights, safe recreational access in the great outdoors and preventing the killing and maiming of domestic animals. For more information, visit www.waraw.org. January 2015, “The Growers’ Guide” Page C15 Beware continued from page C14 management. The information at http://www.Choosemyplate. gov includes an online food-tracking system. The NDSU Extension Service has a variety of free food and nutrition resources available. Visit http://www.ndsu.edu/ boomers to sign up for a free monthly e-newsletter. The January materials feature ways to nourish and exercise your muscles. For some, the ‘”do-it-yourself” approach is challenging. Some may prefer a weight-management group, while others prefer individual diet counseling. If you decide to join a program, heed this advice from the Weight Information Network. Safe and effective weight-loss programs include 1) a plan to keep the weight off, 2) provide guidance on how to develop healthier eating and physical activity habits, 3) provide ongoing feedback, monitoring and support, and 4) set slow and steady weight-loss goals of 0.5 to 2 pounds per week. If you decide you want to see a health professional about weight loss, check his or her credentials. A “nutritionist” does not necessarily have training in nutrition. A registered dietitian has a degree in nutrition, has completed hundreds of internship hours, passed a national registration examination and participates in continuing education. Some have advanced certifications in weight management. Licensed nutritionists have advanced training in nutrition, and most have a bachelor’s degree in nutrition. They also must complete continuing education to maintain their license. Extension agents/assistants are employed in many communities throughout North Dakota. All have had training in nutrition. Some are dietitians or licensed nutritionists, and many offer classes in food preparation and nutrition. As we begin a new year, start your day out right. Here’s a tasty recipe courtesy of the Iowa State University Spend Smart Eat Smart program that will make having breakfast a snap. Proteincontaining breakfast meals help prevent overeating later in the day. Make-ahead Breakfast Burritos 1 c. diced potatoes (1 medium potato) ½ c. diced onions (1/2 medium onion) 1 c. diced bell peppers (1 medium pepper) 8 beaten eggs 1/8 tsp. garlic powder ¼ tsp. pepper 1 c. shredded 2 percent reduced fat cheddar cheese 8 flour tortillas (8 inch) Spray a large skillet with nonstick cooking spray. Cook the potatoes for 6 to 10 minutes over medium heat. Add onions and peppers to the potatoes. Cook for three to four minutes until the potatoes are browned. Add People...Products...Knowledge... beaten eggs to the vegetable mixture. Cook for four to five Divide Liming Recommendation Sandy Loam Silt Loam Clay Loam Peat minutes over medium heat. from SMP or A/E Buffer pH by Stir off and on until there is NuCal is a specialized soil the Following Factor for each no liquid. Stir in the garlic and plant nutrient calcium Particular Soil 6 5 4 3 powder and pepper. Roll each mineral and is not suitable for sunburn protection. burrito. Use 2 tablespoons The information contained in this of cheese and ½ cup of the bulletin is considered accurate. egg mixture for each burrito. Since every soil situation can NuCal weighs be different beyond our control Serve or freeze. To freeze the - based on many natural factors, pounds Liming recommendation for a Silt Loam soil is 3,000 pounds of ag lime. burritos, wrap each burrito all recommendations are made per gallon. without guarantee and Columbia tightly in plastic wrap. Freeze River Carbonates disclaims any Each gallon in a single layer on a cookie liability incurred with the use pounds of ag lime pounds of 3 contains of these data or suggestions. sheet. Seal wrapped burritos Nothing contained herein should in a freezer bag when they are pounds from be interpreted as a recommendadivided by (Liming Recommendation) frozen. To reheat the frozen tion to use any product in conflict of pure, with existing patents covering burritos, remove the plastic ultra-micronany material or its use. The qualwrap. Wrap burrito in a damp ity standards for our fine products pounds of 3 ized Calcium are high. If you are not satisfied gal. paper towel. Set microwave with the performance of our maCarbonate. on medium power. Heat the divided by pounds/gal NuCal we wish to know. Please /acre terials, of contact us at 800-272-8882. burrito for 3-4 minutes. Makes eight servings. If your interest is perked to learn the solution to your current and threatening Each serving has 270 calories, 9 grams (g) of fat, 31 soil pH problem, give us a call for the location g of carbohydrate, 14 g of of a meeting nearest you for more information. protein, 2 g of fiber and 500 milligrams of sodium. Field Example: 16 12 3,000 600 5 CaCO 12 600 CaCO NuCal ONLY 50 NuCal 1-800-272-8882 January 2015, “The Growers’ Guide” Page C16 NEW 7000 HARROWS HEAVY Proud Supporters Of 4-H And FFA!!! • Optional Hydraulic Tine Adjustment or Down-Pressure Adjustment Available • No Parallel Linkage For Fewer Moving Parts! IN STOCK: • User Friendly – Easy To Set! 50', 62' & 70' • 5 Bar, 5⁄8"x26" Straight Tines STRAWMASTERS • Solid Truss Arms (no cables) Lewiston, ID • 227 20TH Street North Fax (208) 746-4821 • Phone (208) 743-7171 DIESEL & MACHINE, INC. THERE IS ONLY ONE, THE ORIGINAL. SUNFLOWER. SALFORD, 30’ air drill, double disc $125,000 SUNFLOWER 9421, 30’ drill, seeder divider tents, seed meter............ $56,000 SALFORD RTS VERTICAL TILLAGE, 24’, comes with 3-row tine harrow & basket harrow, demo ......................... $34,500 JD 2310, 34’ mulch finisher, 6 heavy-duty bar flex harrow .......... $61,000 For more than sixty years, Sunflower® seeding and tillage systems have lead the industry in performance and durability. That’s why Sunflower has been the only choice for generations of professional producers seeking bigger yields. Sunflower offers a full-line of innovative, hardworking products including field cultivators, soil conditioners, chisel plows, grain drills and America’s top-selling disc harrow line. Plus, Sunflower tillage equipment provides some of the highest resale values on the market. • The new 1435 Series disc harrows offer more weight for better penetration and with C-Flex mounted scrapers for more effective disc scraping for more efficient operation in the toughest field conditions. • The 1435 Series offers seven models ranging from 20-ft. 7-in., to 35-ft. 10-in. working widths with over-center wing fold for narrow transport. DEGELMAN 7000, 62’ heavy harrow, chrome tips, hydraulic tine angle ........ $32,500 IH 500, 16’ tandem offset disc, on rubber, good condition.... $5,200 MF 880, 6-btm plow, auto reset ......... $3,500 SPRAYER, 800-gal stainless, $ 65’ booms, hyd pump, hyd fold-up ..... 6,500 Stop by and see us today for more information. Accept no imitations — there is only one — Sunflower. DIESEL & MACHINE, INC. Phone (208) 743-7171 • Lewiston, ID • 227 20TH Street North “The People with the Positive Approach” IN STOCK! ✔ Heavy Duty Drive Components ✔ Heavy Gauge Sheet Metal NEW RHINO FR240 25-ft Bat-Wing rotary cutter Ensures a clean cut with spring-cushioned, mechanical level life axles; front-to-rear leveling control rods; and one-half-inch x 4-inch updraft blades with 6-inch overlap. ✔ Great Warranty! NEW RHINO RC125 25-ft Flail mower ‘79 JD 8640H, QuadRange, PTO, 275-engine-hp, duals ................... $17,500 MF 1505, 174-PTO-hp, diesel, manual transmission, cab .................. $7,500 ‘65 JD 2010, diesel, 2WD, 3-pt, loader, synchro trans. ..............................$3,500 KUBOTA M4950DT, diesel, 4WD, 49-PTO/55E-hp, synchro trans ................ $9,000 KILLBROS 1820, 1,000-bu cart, hyd. or PTO, front fold auger, roll-up tarp $24,500 5-Year Limited Warranty on gearbox. End tow package available for ease of transport. Shredder blades are Tungsten Carbide hard surfaced for maximum life. DIESEL & MACHINE, INC. Phone (208) 743-7171 • Lewiston, ID • 227 20TH Street North “The People with the Positive Approach” HESSTON 4790, 3x4 baler, cutter, knotter fan, hyd lift, ..... $35,000 NH 1116, 16’ windrower, diesel, cab, A/C .......................... $9,500