Complete list of our machines (PDF format)

H²M technologies
ZI de Mézaubert
35 133 JAVENE / FRANCE
+ 33.(0)2.99.99.80.03
FAX
+ 33.(0)2.99.99.80.59
E.mail : [email protected]
● Maintenance ● Rénovation ● Assistance technique
Flux laminaire
MACHINES FOR SALE
PRIMARY PACKAGING
TABLET PRESSES
Ref 2892: SEJONG MRC-45S rotary tablet press, 2006, 45 stations, Max output : 270 000 tablets / h, max tablet diameter: 13 mm,
oblong 14 mm, max tablet thickness 8.5 mm, tooling type : Euro-B orTSM –B, machine sizes : 1100 x 1550 x H 2130 mm
Ref 2871: KORSCH PH800/77 Rotary tablet press, 1998, 316l and 304 stainless steel conatct parts. has 77 punches and B type fixed
turret. maximum main compression force is 80 kN and maximum precompression force is 20 kN. maximum tablet diameter 13mm, maximum
filling depth 18mm, maximum tablet thickness 8.5mm. maximum tablet per hour 997,920. main drive motor 13.6 kW. unit controlled by
siemens model S7-300 PLC within one control panel. also includes mobile control unit and electrical control panel.
Ref 2858: KILIAN T400 Rotary double layer tablet press, 1998 (recondtionned in 2003), 73 stations, Max tablet diameter : 11 mm, for
powder/granules, max output : 900 000 tablets / h, turret arranged for keyed EURO-NORM B punches with BB dies, Max compression :
80 kN, Max pre-compression : 18 kN, Max depth of fill : 16 mm, diameter of die : 24 mm, fitted with KILIAN Cw 200 compaction force
colour monitor and printer, press tooling is not included.
Ref 2811 : MANESTY UNIPRESS 27 station rotary tablet press, 1987, Max Output : 196 000 tablets /h, max compression : 65 kN (6.5
tons), with a variable speed Rotary Powder Feeder , max depth of fill : 18 mm, the turret accepts Euro-B Punches and B Dies ( sold
without tooling ), max tablet diameter : 16 mm, the upper punch guides are keyed allowing production of shaped tablets, with a PreCompression Station ( pre-compression force : 10 kN), Stainless Steel hopper, fitted with Strain Gauges which are fitted with connections
to a Manesty SENTINEL Tablet Weight Control Unit (Please note this Unit cannot be tested by us, if required it will need to be checked,
serviced and tested before putting into service), GMP compliant, The Operator controls are mounted at the front of the machine and
include the On/Off Starter, Clutch Control, Ammeter, Sentinel 3 unit, Compression Force Indicator, Output Indicator, Controls for
Tablet adjustment and the Rotary Feeder and various Indicator Lamps, upper punch penetration : 1 to 6 mm, electrical installation : 4 kW,
380/415 V, 3 phase, 50 Hz, machine sizes : 1100 x 1100 x 1900 mm ( weight 1800 Kg ) .
Ref 2810 : MANESTY UNIPRESS 34 station rotary tablet press, 1994, Output : 98,400 – 246,000 tablets /h, max compression : 65
kN (6.5 tons), with a variable speed Rotary Powder Feeder , max depth of fill : 18 mm, the turret accepts Euro-B Punches and BB Dies (
sold without tooling ) , max tablet diameter : 11.1 mm, the upper punch guides are keyed allowing production of shaped tablets, with PreCompression Station ( pre-compression force : 10 kN), Stainless Steel hopper, with a Manesty Compaction Force Monitor (Please note this
Unit cannot be tested by us, if required it will need to be checked, serviced and tested for function before putting into service), GMP
compliant, The Operator controls are mounted at the front of the machine and include the On/Off Starter, Clutch Control, Ammeter,
Output Indicator, Controls for Tablet adjustment and the Rotary Feeder and various Indicator Lamps, upper punch penetration : 1 to 6
mm, electrical installation : 4 kW, 380/415 V, 3 phase, 50 Hz, machine sizes : 1100 x 1100 x 1900 mm ( weight 1800 Kg ) .
Ref 2784: KILIAN TX-30A Rotary tablet press, 1987, 30 punching stations, type of tooling TSM(IPT)-B, for tablets Ø 2 - 16 mm, filling
depth max. 20 mm according to filling cam, pre-pressing capacity max. 13 kN, pressing capacity max. 80 kN, output 19,800 - 189,000
tabl./hr., drive 4 kW, forced feeder, keyed turret, control device Kilian MC, technically overhauled, drive 220/400V/50Hz, good condition
Ref 2776 : NOVAPRESS Tablet press, 1983, 45 postes, euro B tooling, Max tablet diameter 15.87 mm, Max filling depth 17.46 mm,
precompresson 1016 Kg, max compression 6604 Kg, output from 900 to 4500 tablets / min, Machine sizes : 1397 x 1230 x H 1815 mm,
comprising also a new turret ( 61 postes, Euro BB tooling ), adaptable on this machine
Ref 2632: HORN & NOACK GRP34 rotary tablet press, Year 1993, 34 stations, press tools EUR-D (for max. 25 mm tabl. dia), Output:
10.000 - 153.000 tabl/h, With pre-pressure, max main compression : 80 kN, Max precompression : 20 kN, max filling depth : 18 mm, Max
height of tablet : 9 mm, Rotation speed : 5 – 75 tpm, matrix diameter : 38.1 mm, matrix height : 23.8 mm, Machine sizes : 1527 x 1162 x H
2102 mm with hopper ( 1908 mm without hopper ) , weight 2800 Kg , Pharmatronic control panel, with AWC (automatic weight control
system for weighting of tablets and automatical adjusting of the tablet press to the necessary pressure), very good
Ref 2594: NORN NOACK GRP 42 E Tablet press for EUR-B (without tooling), Year 1993, The turret head will be renewed, Machine
dimensions (L x B x H): 1,1 x 1,5 x 2 m, Max tablet diameter : 18 mm, Max main pressure force : 80 kN, Max prepressing force : 20 kN,
max filling depth : 18 mm, Max tablet thickness : 9 mm, rotor rotation speed : 5 – 100 rpm, output from 12 600 to 252 000 tablet / h,
matrix diameter : 30,16 mm, matrix height : 22,22 mm, diameter of punch shaft : 19 mm, voltage : 380 V, Connection : 15 kW
Ref 2534: MANESTY BETAPRESS 16 station single sided rotary tablet press, output up to 90,000 tablets per hour. Slotted turret for
shaped tablets, max. tablet diameter 16mm, pre-compression 7.5kN, main compression 65kN. incorporating high speed tabletting design
features of pre and main compression stages combined with a twin paddle rotary feeder for efficient die filling. The variable speed drive
system provides low to high output rates with the low tooling costs of only 16 Stns. Ideally suited to small / medium batch sizes and also
pilot / development scale applications. The machine has all round interlocked guarding. The machine has been recently refurbished.
Ref 2397: MANESTY 2C single punch eccentric press can produce both round and shaped tablets up to 38mm dia. robust press, ideally
suited for the production industrial compacts. can be equipped with multi-tipped tooling for increased output. The 100kN pressing
mechanism is equipped with an adjustable overload system, Output is up to 3,360 tablets per hour
Ref 2053: FETTE PERFECTA 1000 rotary tablet press, 22 stations (Eu-1“/Euro-D), max tablet Ø 25 mm, max output: 72,900 tablets /h.
Ref. 2006: KORSCH PH216 rotary tablet press 16 station, max. tablet Ø 16 mm, capacity up to 70,000 tablets per hour. Fully
refurbished in 2003, and little used since then. Other used tooling also included. Includes a Lux Pharmtec tablet deduster year 2003.
Ref. 1639B: MANESTY BB3B Rotary tablet press, 27 stations, 15,8mm max. tablet ø, max output 91 200 tablets/h
1
H²M Technologies
Négoce 15/01/15
DOSING MACHINE FOR POWDER
Ref 2903: BOULANT VISSO Semi-automatic filler for powder or granule, 1990, equipment: s/s agitated hopper: 70 liters, feed
aperture diameter : 135 mm, auger, up/down work, counter, e-stop push button, mounted on frame, current equipment: stainless steel
auger: 35 mm diameter (filling from 50 to 600 gr), capacity: filling from 2 to 1000 gr (according to auger), output: 1200 filling/hour
(according to powder), power: 0,75 kw, machine sizes : 0.90 x 0.60 x 1.85 m (250 Kg)
Ref 2891: ALL FILL dosing line year 2005, comprinsing : a filling / dosing machine ALL FILL type AFI 200 , previously used for powder
spices in conical plastic pot (155 ml ), current dosing range : 50 à 110 gr, 2 stainless steel dosing heads, volumetric dosing screw, pot
feeder, one metal detector, one GARVENS Checkweigher.
Ref 2874: MAR DP-3 semi-automatic auger filler for powders, all AISI 316 stainless steel contact parts, with AZO powder transfer
system (vacuum pump not included) for filling from a barrel or container, bench mounted auger filler for semi-automatic operation with
foot pedal. PLC fine control of dosing, up to maximum 1000gm in a single dose. Year 2005. previously filling 1000ml containers with
penicillin powder ( cleaned but no guarantees ), accuracy with the current auger is +-2%.
Ref 2045: IMA ZANASI MD 150 Powder filler / bung inserter, 2 dosing heads ( accurate filling of vials via vacuum), single head bung
applicator for a 20 mm bung , fed by vibratory bowl , vibratory bowl feeder , all stainless steel contact parts ,
COATING SYSTEMS
Ref 2905: BRUCK VII G Stainless steel coating pan with hot air blower, 1976, 3 stainbless steel coating pans with useful capacity of 5,
15 and 20 Kg finished tablets, dragées etc and mounted on a base frame. 5 Kg pan sizes : 350 mm diameter x 215 mm depth , opening 200
mm, 15 Kg pan sizes : 570 mm diameter x 320 mm depth , opening 310 mm, 20 Kg pan sizes : 650 mm diameter x 350 mm depth , opening
350 mm, adjustable angle between 0° and 50 ° using a lever on the right-hand side, driven from a 0.37 kW geared motor with variable
speed, a tubular heater directs the warm air into the pan at a controlled temperature up to 90° C and a capacity of approx. 2.0 m3/hour,
blower driven from a 0.18 kW motor and can operate as a Hot- or Cool Air Blower. The air volume can be regulated by a butterfly valve
up to 20 % of the maximum air quantity, electrical : 220/380V, 3 Ph, 50 Hz, Machine sizes : 70 x 70 170 cm ( 140 Kg ).
Ref 2901: FROGERAIS LB2 Stainless steel coating pan 30 kg, 1980, bowl: 500 mm diameter x 350 mm deep – aperture diameter : 300
mm, driven by variable speed, mounted on stainless steel framework with casters, power: 0,25 kw, machine sizes : 0.86 x 0.50 x 1.50 m (
60 kg )
Ref 2663 : Thomas Engineering 60-D Coating pan, 1994, Capacity : 490 Lt, useful capacity : max. load 460 Kg – min. load. 100 Kg, bowl :
Perforated, Speed of the bowl : Since 1.5 till 12 rpm, spray guns : n°5, for aqueous solution, without all air handling systems
Ref 2345: ACCELACOTA 60 Coating system , 1997
CAPSULE FILLERS
Ref 2909: IMA ZANASI AZ25 capsule filler, year 1990, tooling forr size 4 capsule, max output : 25 000 capsules / h.
Ref 2907: MG2 Compact Capsule filler, 1990, 4 format parts ( 0, 1, 4 et 5), output : 40 000/h, with capsule weight checker.
Ref 2617: IMA MATIC 90F Capsule filler, 2002, suitable for Powders, Granular products and Pellets, continuous movement, Capacity :
Capsules size from 000 to 5 ( with the adapted change part) , SUPRO A/B/C/D/E capsules produced by CAPSUGEL and Vegetal capsules,
max output : 88000-90000 CPH (Depending on product), Electrical power supply 230/400 V 50/60Hz, the MATIC 90F Capsule filler
comes with IMA SC1000 Feeding/sorting unit which automatically pre-sort the hard gelatine Capsules (divided into two halves) and
separate them from oval-shaped, Or imperfect capsules and introduce them into the MATIC 90F, capacity for the capsule container: 190
liters, Also included : the IMA DS-71 sorting device for the purpose of selecting the empty Or partially filled capsules from those
properly filled. Another function carried Out the DS-71 selector is that of cleaning the capsules externally (with a counter-flow jet of
compressed air). Hourly production exceeds 160,000 units. also includes a IMA Capsule weight checker, Manuals , excellent condition,
includes decontamination and certificate of cleaning (machine was running on Penicillin)
Ref 2309: VPT R&D capsule filler for R&D , max output : 3000 / h , compact , auto rejection of unopened capsules , fully automated ,
conform to GMP, contact parts of S/S 316, for powder or pellet, capsule size from 00 to 4 .
Ref 2138B : PMS Mcap-II Mini capsule filler for R&D , max output : 6000 / h , auto rejection of unopened capsules , fully automated ,
quick and easy capsule size change ; conform to GMP, Format from 00 to 4 .
Ref. 1772: TEVOPHARM CAP IV Semi-automatic capsule filler, max output 4500 capsules/h, many sets of size change parts available
LIQUID FILLERS
Ref 2807 : BOSCH AVR F04 Ampoule filler, 1986, Output : 8,000 Ampoules /hour, change parts for ampoule 1&2ml, 5ml and 10ml,
Réf 2762 : BAUSCH & STRÖBEL SFM 202 automatic gasing, filling and plunger-inserting machine, 1989, with laminar flow, format for
syringes of 1ml with diameter 8.15 / BD Hypak 1ml long.
Ref 2753 : BOSCH MLF 3002 IN filling / stoppering machine, 2002 (Only used three times) , max output : 120 vials per minute, original
documentation, current format : vials of 3 ml with 13 mm stopper
Ref 2745 : COMAS RF 1000 rotary filling and screwing machine for vial, 1990, fully automatic machine for filling of glass or plastic vial
for liquid, semi-liquid and foamy product, equipment:82 mm widex1400 mm long infeed conveyor, 16-stations transfer feeder, 4 s/s
nozzles, 4 s/s volumetric pistons with valve, s/s vibratory bowl feeder: 500 mm Ø, screwing station, 82 mm widex1400 mm long discharged
conveyor, driven by variable speed, safety guards, s/s frame, current equipment: rectangular vial: 40 mm longx32 mm widex120 mm high,
cap: 24 mm Ø x 20 mm high, 4 s/s nozzles: 8 mm Ø, 4 s/s volumetric pistons from 5 to 50 ml (each one with maxi filling of 200 ml),
capacity: vial Ø: min. 15 mm-max. 60 mm, height: 30 mm- 200 mm, filling from 10 to 500 ml in changing pistons, max output: 4000 vials/h,
Ref 2444: ANREP P3CV semi-automatic vacuum filler for double ended ampoules, 1989, ALTUGLAS vacuum chamber, a loader carrier
with 2 interchangeable grids according to ampoules, a tight bellin altuglas on top of chamber, a control panel with 3 taps “ air- vacuum –
liquid”, a vacuum gauge for vacuum control, vacuum by PIEL pump, tank in altuglas before vacuum pump, s/s frame, current tooling: 2, 5 and
10 ml, max output: 15 to 20000 at 10 ml, 25 to 32000 at 5 ml, 50 to 70000 at 1 and 2 ml, machine sizes: 0.90x0.75x0.55 m
Ref 2436: CMI LINE 6/11 S Liquid filler, 2007, 6 heads, dosing range: 100 ml to 1000 ml, output: 1500 to 2400 bottles/h, no drop
device, discharge of liquid at the bottom of the bottle, s/s hopper with top and low level sensor, Machine sizes : w 4500 x depth 1800 x h
2200 mm, electricity : 400 V , 2,5 kW, pneumatical alimentation : 6 bar, good conditions, in option : infeed table, 2 x 90° conveyors .
Ref 2030 : FARMOMAC F47 Automatic 4- station liquid filling machine (1980), device for closing system for bottles, Output up to
3600 bottles/h, format parts for 50ml, 100 ml, 150 ml and 200 ml bottles,
H²M Technologies
Négoce 15/01/15
LIQUID FILLERS ( continuation )
Ref 2192: BAUSCH + STRÖBEL FFV 4010 vial filling and closing machine, for rubber bungs, suitable for containers with a Ø up to
36mm and a height up to 80 mm. Dosing capacity 0.1 – 50 ml. (according to the pump set), output up to 12.000 units per hour. Continuous
motion, currently set for a 23mm Ø container and fitted with new Siemens S7 PLC. Original year of manufacture 1983
Ref 2049: BOSCH VSR F01 inline vial filling and bung inserting machine, 6 head piston filler and single head bung insertion, with partial
stoppering, including laminar flow unit, several sets of pistons, and handling parts for vials 23mm, 25.5mm, 26.5mm and 32mm Ø. Manual
rotary infeed table and tray loading discharge. Output up to 3600 per hour.
Ref. 1893: GRONINGER RAM21000/2 High accuracy filling machine for test-tubes and similar in trays, 300 to 1000µl dosing range,
tray dimensions 130x55mm, 50 tubes per tray, tube dimensions 10mmx75mm, 420 trays/h max output, 1990, 2400 production hours
BAGS,SACHETS and STICKS FILLERS
Ref 2840 : HASSIA SVL 18/10 stick packaging machine, 1997, 1-tracks (2-/4-tracks pre-adjusted), 1 filling tube Ø 20 mm, max. stick
size Ø 45-200 mm, max. output appr. 50 strokes/min, single-vertical auger dosing (for 4 augers pre-adjusted), 1 change part set for
stick-Ø 20 mm mm, foil width max. 350 mm, foil-Ø max. 400 mm, 380V/50Hz/4KW, good condition
Ref 2832 : STICKPACK SP E5L Liquid stickpack machine, 2004, currently set up with 3 lanes but originally designed as a 5 lane machine.
Speeds up to 70 cycles or 500 sticks/min (depending on product and stick size). stick dimensions: w 10 – 60mm x length 50 – 1000mm.
Siemens PLC with Simatic touch screen HMI control and full temperature control. Machine is CE marked and fully guarded.
Ref 2729 : SERPACK S15D horizontal sachet filler, 1992, very good condition, dosers : 2 volumetric dosers with 3 screw of different
diameters, simple or double sachets, three or four side seal, Format : min 60*80, Max 150*220, Material : complex, weldable hot, Max
output : max 12000 U/h , ALLEN hot foil coder, reel : 500*525, PLC Siemens, Dim : L 3600, l 2000, H 2300 (weight 780 kg)
Ref 2705 : KLOCKNER LA 160 sachet machine, 1997, Capacity : sachet width from 40 to 160 mm, Length from 50 to 140 mm, sachet
volume from 1 to 50 ml, film sizes : Max width 320 mm, max roll diameter 400 mm, Roll core diameter: 76 mm, useable for cream or
powder ( according to the adapted system), currently fitted with cream dosing system, machine sizes : 1140 x 1565 x 1540 mm
Ref 2571 : SIEBLER 90/3 4-lane sachet filler, 1994, Capacity: 60 to 80 cycles/min. = 240–320 sachets/min, Sachet size width : 52,5
mm and Length : 50 mm, Product: 5 g sugar (adjustable), Foil width : 215 mm, Roll Ø: max. 500 mm, Roll core Ø: 76 mm, Electrics: 380
Volt, 50 Hz, Connection: 3 kW, with photocell foil registration, two reel holders, s/s product hopper, machine documentation in German
FILLER for Tube of Tablets
Ref 2865: MARCHESINI T400 Tablet Tube Filling and Closing Machine, 1987, continuous motion, Continuously running tablet belt
infeed, with broken pieces eliminated before entering the machine. Individual insertion of each tablet with continuous vertical pushers,
Tube infeed from magazine with tray loading, 300mm between working surface and base for GMP cleaning, Easy dismantling for cleaning,
infeed belt to feed directly from a tablet press, tube filling unit, collecting and feeding table for tubes, cap feeder, suitable for 25mm
Ø tablets and counts of 10 (20 also possible) tablets /tube, Can work independently or inline.The tubes are filled upside-down to avoid
fragments of tablet entering the tube. capacity of up to 100 tubes per minute. Electrics: 380/50/3, Max power 1.4 KW, Dimensions:
4330 x 2565 x 1850 mm (Weight: 970 kg), Conveyor height: 945 mm, Compressed air consumption: 60 L/min; 6 Bar
Ref 2344: COMPTOSET 5200 Tube packer , 1987
TUBE AND POT FILLERS
Ref 2804 : TGM E250 matic fully automatic s/s tube filling and sealing machine. set up for thermoplastic tubes utilizing induction
heated "hot jaw" method for closing and sealing. The heated jaws have a recirculating cooling water system. complete with a metal fold
jaw set for single, double and saddle fold closing of aluminium tubes. 3,700 (Max) tubes /h, Plastic tube range 10-50mm dia; 50-240mm
long, Aluminium tube range 10-42mm dia; 50-240mm long, 12 position workstations on the rotary turret, All s/s construction, Tube
pushdown device, Coding set numbers and letters for plastic and aluminium, No tube/No fill sensor, Large capacity empty tube
cassette/tube loader with tube length adjustment, s/s product hopper with agitator/ inductor auger,Tube registration system for
orientation of printed tubes prior to filling cycle, Electrical cabinet integrated within machine footprint, Quick interchangeability of
closing heads, conveniently located control panel. original documentation/user hand-book and several sets of tube-holder change parts,
Various sets of tube holder cups for metal and plastic. Diameter size: metal 20mm, 22m, 30mm, 35mm, 40mm and 50mm. Diameter size:
plastic 25mm, 30mm, (35mm; x 3 sets)+ Box of various spares. Machine is in excellent condition, ready to go.
Ref 2596: TONAZZI COLIBRI 60 Automatic volumetric tube filler, automatic infeed tube with loader, tilting station, 12 pocket,
volumetric piston tube filler, s/s nozzle, jacketed s/s hopper with mixer: 65 liters, sealing station by 3 pairs of clamps with heat jaws,
closing station by 1 pair of clamps with striate jaw and we can add character (without character), cooling station by water, cutting
station, 12 pockets for round tube 19 mm Ø, 1 piston: 22 mm Ø(filling from 15 ml to 40 ml), 1 nozzle: 5 mm Ø, capacity: filling from 3 to
200 ml (according to adapted piston), tube dimensions: 10-42 mm Ø x 50-200 mm high, output: 50-60 tubes/minutes, 1989
Ref 2489:IWKA TK63Tube Coder S/N 31/36833, without laser unit, max output: 160 tubes/min, tube diameter of 28mm, tube length of
155mm, dimensions approx. 1,3 x 1,9 x 2 m
Ref. 1729: BAUSCH & STROEBEL RFV2020 Tube filler and closer for small plastic tubes, 2 pistons dosing stations, ultrasonic sealing,
magazine loading, current tube size 13,7 ∅ x 60mm length, Siemens S7 controller
SECONDARY PACKAGING
CAPPERS
Ref 2694 : BAUSCH & STRÖBEL REV 6010 Closing machine for vials, 1999, closing machine for 2 different closures, processing of
cylindrical bottles Ø 16-70 mm, h 35-240 mm, flat or specially shaped bottles w max. 80 mm, d max. 80 mm, h max. 240 mm, screw and
crimp caps max. Ø 40 mm, output max. 12,000 objects/h according to object, for closure types like rubber stopper, dropper inserts,
pipettes, spray pumps, child-resistent closures, snap-on closures as well as crimp caps, screw caps and pilfer-proof caps (according to
change part set), feeding conveyor NTS 8071 with discharge for laying objects, discharge conveyor ME 400 with trayloader for 2 trays,
bad discharge with vacuum, presently adjusted for screw cap closure (right station), crimp station (left station) presently only for
throughput of vials without crimping with bottle hold down for bottleneck-Ø appr. 11 mm, with change parts for vial Ø 22,75x38 mm,
crimp cap Ø 14,9x8 mm (without feeding rail and crimping tooling), screw cap Ø 11,7x23,2 mm, PLC Siemens S5/115U, connection
230/400V/50Hz, CE-mark, LF-capable by enclosure, very good condition
H²M Technologies
Négoce 15/01/15
CAPPERS ( continuation )
Ref 2641: CMI Screw capper, 2002, Used for metal screw caps from 32 mm diameter till 48 mm diameter, max output : 50 caps/min.
Ref 2384: KUGLER K705-S8 Screw capper, 1998, output: 4200 to 16800 / h (working output: 9000 / h), compressed air: mini 6 bars,
working direction: left to right, reject device, control panel, caps elevator, conveyor.
Ref. 1730: INOVA VVM3011 Capper
Ref. 1384: STRUNCK VDRA01 Bung inserter, rubber caps, 20mm capsule, 13mm interior ø caps
LABELLERS
Ref 2902: BAUSCH & STRÖBEL ESA 1001 Automatic self-adhesive labeller for small round vial and ampoule, 1996, Equipment: 1050
mm long x 400 mm wide pvc belt conveyor, turret , labelling station, coding station by Allen coder (currently without character), label
position control by photocell , vial/ampoule control by photocell, printing and label control by camera with stop system, discharge system,
stainless steel frame, safety guards, current formats : ampoule: 2 ml - 10,75 mm diameter, ampoule: 5 ml - 14,75 mm diameter, ampoule:
10 ml - 17,75 mm diameter, vial: 18,25 mm diameter, vial: 22,50 mm diameter, vial: 23,50 mm diameter, vial: 30 mm diameter, capacity
(with adapted format): vial: maxi 30 mm diameter x 140 mm high, output: 12000 ampoules/hour (ampoules 2-5 ml), 10000 ampoules/hour
(ampoules 10 ml), 6000 vials/hour (18,25 mm - 22,50 mm - 23,50 mm), 5000 vials/hour (30 mm diameter), installed power: 2 kw, pressure:
5-6 bar, machine sizes : 2.75 x 1.50 x 1.80 m ( 500 kg )
Ref 2846 : NERI RL 450 vials labeller, 2005, Max output : 450 vials / min, vials sizes : diameter from 8 to 32 mm, height from 40 to
100 mm, Label sizes : Height from 10 to 60 mm, Length from 13 to 100 mm, Machine sizes : 2300 x 1500 x 1900 mm, SIEMENS
SIMATIC Multipanel sizes : 1000 x 700 x 2300 mm, unwinder labels NERI AGS 500 of 2005, Systech camera with panel control
Ref 2768 : SFE labeller, 1993, with one conveyor ( width 80 mm ), UCV display, OPENDATE module, caroussel, SUPERIOR EL printing
head, automate TSX17, current vials diameter : approx. 48 mm
Ref 2714 : HARDLAND MINEX automatic self adhesive labeling machine in stainless steel, new in 1998, 80mm wide x 3.5m long
slatband conveyor, variable speed. Infeed roller & pad for spacing of product, chain aligner device sets position for product to enter the
top hold feature with 25mm wide x 1.25m long speed adjustable belt for positive stability of product during label application. Two
"Comet" labeling heads fitted for either single side or front and back labeling applications. Label wraparound station with 400mm high x
1000mm long "wipedown" pad. 180mm high web roller, label beaks fitted are 130mm high. Machine is 240V 1ph supply. Excellent condition.
Ref 2637: BAUSCH + STRÖBEL ESF 1015 self-adhesive labeller for wraparound labelling of bottles and vials etc. with a diameter
from 16 mm to 80 mm and up to 200 mm high. Capacity up to 6,000 labels per hour. Includes Argus 6012 code reader, Bausch + Ströbel
rotary infeed table RTE 702 and rotary outfeed table RTE 702, and packing conveyor with Metronic Alphajet MI23 inkjet coder.
Includes parts for 2R, 10ml, 15ml, 30ml, 50ml, 100ml and 200ml vials. Year 1996
Ref 2492:BAUSCH & STROEBEL SM 6005 Syringes labeller, 1988, 6 syringe loading chute, syringe transfer comb, station of piston
placing, labelling station with ALLEN coder, label and marking presence control by photoelectric cell with ejection, station to push piston
into syringe at 6 pushers and 6 chutes, 2 vibratory bowls for piston automatic feeding, piston presence control by photoelectric cell with
ejection, separated control panel and electro cabinet, safety interlocked guarding, s/s frame, current tooling: syringes 0,5 and 1 ml,
syringes body Ø: 6,85 mm, syringe height with needle cover without piston: 73,5 mm and with piston: 102 mm, Length piston: 53 mm,
Capacity with new format: syringe Ø : 7 -17 mm, syringe volume: 0.5-10 ml, max label height: 70 mm, max outpu : 6000/h,
Réf 2077 : NERI SL300S Tube labeller (tube containing a syringe) , 2002 , max output : 200 strokes /min , current tube sizes : L 57.5
mm , ∅ 15 mm , no marking device , detection of the label presence , reject device , fitted with a tube counter .
Ref 1939B: BOPACK COLLAMAT labeller for vials or bottles, 2001, output: 80 strokes/min, max label height: 100 mm,
Ref. 1615: BOSCH STRUNCK EVWF01 Wet-glue labeller, 100mm max bottle ø, 150mm max bottle height, 7200 labels/h max output
Ref. 1614: BOSCH STRUNCK EVWL01 Wet-glue labeller, 100mm max bottle ø, 150mm max bottle height, 3600 labels/h max output
Ref. 1385: HARDLAND SIRIUS Labeller, 1999, place a leaflet "TOPSERT" on the top of cap of square bottles
BLISTER PACKERS
Ref 2906: UHLMANN UPS 1030 ET Blister packer for PVC / Alu and Alu/Alu blisters, year 1999, intermittent motion, for tablets,
capsules and dragees, max output : 560 standard blisterpacks / min, Aluminium/Aluminium blisters are cold-formed, a Hairline Crack
Control type HPF checks the deep-drawn blisters for cracks, automatic feeder type SimTap 2.1 (Age 2003), optical product presence
control camera with ejection unit, Perspex safety doors, Max foil / stroke : 142 mm long x 255 mm wide, max draw depth : 17 mm ( alu
10 mm), Max foil width 270 mm, current format parts : oblong tablet 18,5 mm x 10 mm, blister sizes 100 x 70 mm , 6 blister / strokes,
operating manual in germa language, electrical : 220/380 V, 3 Ph, 50 Hz, machine sizes : 7000 x 2000 x 1950 mm.
Ref 2904: ROMACO N623 Blister packer, 2004, intermittent motion plate machine, for PVC/alu, foil width max. 230 mm, max. length
160 mm, max. forming depth 24 mm, output approx. 70 cycles/min. (cutting station), product feeding of tablets/capsules by vibrating
container, individual feeding by rotating drum, suitable also for manual feeding, die-cutting unit size max. 220 x 158 mm, 1 format set for
PVC/alu, die-cutting format for blisters 105 x 62 mm, filling control with camera Leatus POLYPHEM wt 40 touch, CE certificate, el.
connection 230/400V/50/60Hz
Ref 2847 : UHLMANN UPS4 DT Blister packer of 1982 ( updated in 2006 and 2010), Output : from 15 to 50 cycles / min with blister
depth of 12 mm and from 15 to 40 cycles / min with blister depth of 28 mm, useful forming area : L 220 mm x l 284 mm, format parts
for tablets 8R8 / 9R9 / oblong 13.5x6.07 / 11.8x5.3 mm blister of 14/ 15 / 20, several change parts .
Ref 2799 : IWKA BPR Blister packer, 1996, rated at 600 Blisters / min, Brush feeder system, Laetus Polyphem 1030 vision system,
Perforating station with embossing, Print mark registration system for lid foil, One set of blister format 100x38, Chiller no present,
Start of production 2001, Last production 09/2010, Complete documentation with preventive maintenance work instruction.
Ref 2406: CAM PARTENA M82 blister packer, 1992, soft version EC V/0501, 40 strokes / min, step : 156 mm, 2 vibrating bowls for
needle , control of product presence by camera, with in option a machine to remove syringe of NEST before entry in blister packer
CARTONERS
Ref 2760 : CAM AV 65 vertical cartoner, 1979 but overhauled in 2000 ( mechanical + electrics security + guarding ) with leaflet
feeder, embossing device, traditional blade opening system, complete manual
Ref 2665 : MARCHESINI BA400 automatic cartoner,1985, A 25-70mm, B 13-70mm, H 80-200mm, Max output : 400 cartons/min,
leaflet feeder GUK type RS21/760, ROTANOTICE control, barcode reader LAETUS type 6012 with ejection unit, blister feeder
H²M Technologies
Négoce 15/01/15
CARTONERS ( continuation )
Ref 2898: BOSCH CUK 1070A horizontal cartoner, 2001, previously used for packing ampoules and vials ( grouping), Current format
parts (8) : 5 ampoules of 1 ml diam 10.75 mm x H 47 mm, 5 ampoules of 2 ml diam 10.75 mm x H 57 mm, 5 ampoules of 5ml diam 14.75
mm x H 68 mm, 5 vials 6R diam 22 mm x H 45.3 mm, 5 vials 10R diam 24 mm x H 50.3 mm, flacons 10 R + ampoules 5 ml ( 2x5), 10
ampoules of 5 ml, 5 ampoules 10 ml diam 17.75 mm x H 87.5 mm, ampoules and vials feeding device, rotanotice, hot melt closure, machine
sizes : 5000 x 1580 x H 2000 ( 3700 Kg )
Ref 2825 : MARCHESINI MA120 horizontal intermittent cartoner, automatic feeder with "pick and place" arm base ar-s350-4-200
system for tube, adjustable buckets, pre-folded cartons magazine with conveyor, leaflets station rotanotice/guk rs 21/760, bar code
reader for leaflet and carton, closing station, discharged system, control box with plc, PLC siemens simatic s7, driven by variable speed,
vacuum pump, safety guards. Current equipment l: reverse tuck carton sizes (c)110 mmx (a)48 mm x (b)48 mm, product : tablet tube.
Capacity : carton sizes mini (c)50 mm - maxi 200 mm, mini (a)20 mm - maxi 125 mm, mini (b)15 mm - maxi 90 mm, Max output: 120 cartons
/min, installed power: 5 kW, max pressure: 6 bar, machine sizes : L 4130 x 1900 x 1700 m ( 2600 kg ).
Ref 2603: PROMATIC AS60 cartoner, 1993, Max output: 100 cartons/min, leaflet folder GUK and laetus argus bar code reader,
cartons sizes : A 20 to 125 mm, B 15 to 80 mm, H 60 to 210 mm, electricity: 220–380– 415 V/60 Hz, tuck-in closure,
Ref 2548: CAM AVC-2 automatic vertical cartoner, continuous motion, 2005, Allen bradley panel view 550, CAM bottle orientor,
without leaflet inserter, pick and place device to put the bottle (x3) into the bucket, prefitted with NORDSON holt melt closure
(NORDSON not included), Max output: 200 cartons/min, set up to handle the following package: jar dim.: 44x35mm (15ml.)/Carton dim:
46x46x77 mm, jar dim: 58x54 (1.7 oz)/carton dim: 62x62x60mm, jar dim: 62x47 (1.7 oz.)/Carton dim: 66x66x52 mm, jar dim: 62x47(17
oz)/Carton dim: 66x66x93 mm, Pack #5/bottle dim: 49x94(50 ml.)/Carton dim: 70 x 50 x 136 mm, only 68 working hours
Ref 2428: UHLMANN C300 continuous motion cartoner for blisters, carton size range Length 30 to 75mm, width 15 to 75mm, depth 65
to 150mm. Includes blister magazine, GUK flat sheet leaflet folder, rotary carton feeder, output potential up to 300 cartons per minute.
Ref 2153: CMA MINICOMPACT vertical cartoner for vials, bottle size range min. Ø 46 mm x 83 mm high, max. Ø 66.5 mm x 143 mm
high. Carton size range min. 20 x 10 x 70 mm (AxBxC), max. 120 x 70 x 200 mm, includes pre-folded leaflet inserter, rotary bottle
infeed table, automatic loading of the vial into the carton, reverse tuck closure, intermittent motion, max output 35 cartons / min, 1995
Ref 2152 : NORDEN NORDENMATIC NM 1000 NX horizontal end load cartoner, 1989,pre-folded leaflet inserter, single side carton
flap coder, reverse tuck closure, carton size range: 70x20x15 mm (LxBxH)- 220x70x75 mm, up to 100 cartons per minute, continuous
END OF LINE
Ref 2899: BFB M32W Shrink tunnel, year 1997
Ref 2893: HOONGA HB 40 Strech banding machine
Ref 2890: CAM SMV/S top load vertical case-packing of products which are difficult to handle, for example: bottles, plastics, pots,
envelopes and sachets, year 2007, Up to 12 cycles per minute, Size range for the cases 200mm to 595mm x 120mm to 395mm x 105mm
to 395mm, Including instruction manual, electrical drawings, vacuum pump, list of spare parts.
Ref 2836 : CAM ASB 38 + TRM 38 collator/ sleeve sealer / stretch bander, 2000, designed to collate and over-wrap collations of
cartons, in-line infeed, complete with TRM 38 shrink unit, both machines fitted with interlocked safety guarding
Ref 2835 : OLI 210 case packer ( 2 available )
Ref 2772 : SOCO system case taper, 2001, case sizes : min 150 x 150 mm, maxi 450 x 600 mm, machine sizes : 2000 x 800 x 1900 mm
Ref 2856: IXAPACK Layer palletizer of 2006, current output: 8.75 boxes/min with american boxes of 391x161x182 mm, 5.83 boxes/
min with american boxes of 398x244x173 and 165 mm, 4.38 boxes/min with american boxes of 394x318x182 ( current boxes weight
from 5.8 to 12 Kg), max palletizing height: 2200 mm from the ground, current pallet : Euro Pallet 1200x800 Ht 150 mm and UK pallet
1200X1000 Ht 150 mm. comprising : one conveyor for empty pallets (useful width 1000 mm), orientation table for boxes and transfer of
boxes rows, gripping table, layer palletizer ( gripper with suction cups and hooks for pallets transfer ), interlayer magazine, wire mesh
protection, opening sensor and safety light curtains, OMRON automate, OMRON color touch screen 10 inch, SEW motorization,
Ref 2771 : PESTER Pewo-pack 450 SN-HS collating stretchbanding machine, 1993, film type : PE, film width: 450mm, min film width :
30 mm, film thickness : max 0.1 - min 0.02, max roll diameter 300mm, core diameter 70/76, Machine sizes : 2.9m x 1.3m
Ref 2769 : CERMEX SL 21 case packer, 1990, max output: 120 cartons/min, TSX 3721 automate, adjustable carton infeed up to 80cm,
hot melt closer device NORDSON 2302 (tank Volume: 8500 cm3, pumping output: 32.6 Kg/h, 105 to 205 °C, 3500W), case capacity:
length: 200 to 450 mm, width: 170 to 250 mm, height: 100 to 375 mm, Length + width max 650 mm, flap from 85 to 125 mm, carton
capacity : Length ( stacking device width direction ) from 75 to 200 mm, thickness (stacking device heigth direction ) from 30 to 60 mm
Ref 2767 : PESTER Pewo-Pack 450 Heat Shrink/Stretch Wrapper, 2002, 3 x 410 volts, Frequency 50-60 hz, Power: 14.3 kw, Current:
32 amps, Aperture/Tunnel: 460mm wide & 250mm high, with manual, Overall Dimensions ( L x W x H ): 4300mm x 2200mm x 1800mm.
Ref 2731 : MARCHESINI PS 510 Automatic Case Erector/Packer/Tape Sealer, Rated up to 13 cases and 300 cartons/min (depending
on case size and pack pattern). Case Size Range: 5.6" - 18" long x 4.8" - 14" wide x 3" - 14" high. Carton Size Range : 1" - 18" long x 3/8" 5.6" wide x 2.2" - 7.2" deep. Has a powered blank case magazine, (4) suction cup reciprocating Pic-N-Place, 54" long x 8" wide rubber
carton infeed conveyor, up stacker, with single arm ram case loader. Flap closing section with 2" wide top/bottom case tapers, dual 36"
long x 1 1/4" wide top / bottom case gripper belts with 32" discharge height. Marchesini swing arm touch pad controller with panel view
and slide track safety guarding. 3/60/480V, CE Certified. Machine footprint 144" long x 68" wide x 90" tall. Built 2001
Ref 2668 : BFB 3786 Carton Collating / Overwrapping Machine, fitted with Telemecanique PLC Control System, 1993, fully mechanical
machine, size change over without any tools ( max 10 min ), easy adjustments by digital indicators, max output : 50 bundles / min, Film :
PP, PVC and cellophane, max bundle sizes : height from 25 to 150 mm, length ( on width film ) from 65 to 250 mm, width from 70 to 300
mm, width film from 100 to 500 mm, machine sizes : 3100 x 1200 x 2100 mm, electricity : 380/220/24DC Volts, 50 Hz, phase 3+1
Ref 2661 : IMA BFB 3786B carton collating and overwrapping machine, bundler. Fully mechanical machine driven by cams. No pneumatic
motions, Oil Bath lubrication, Easy cleaning, Rotary knives to cut the film, Positive film feeding system by means of timing belts, Main
pusher with return stroke over the top of the stacking unit, High-speed stacking unit, Automatic discharge of the last bundle left into
the machine, Continuous motion exit sealing belts, Size change-over without any tools, easy adjustments by digital indicators, Size
change-over time: 10 min max, powered double film unwinders, Size range: Cartons - min. 12x10x65 to max 300x85x200mm Bundle - min.
70x25x 65 to max 300 x 150 x 250mm, Output from 100 to 500 incoming individual cartons, and up to 50 bundles per minute. Year 1994
H²M Technologies
Négoce 15/01/15
END OF LINE ( continuation )
Ref 2529: MARCHESINI BA 90-BFF case packer , 1999, collates cartons 2 x 5 or 3x4, then pushes them into bucket chain and moved
into position to be fed into case that picked via vacuum and erected then pushed into position where carton packs are pushed into case
then glued closed at both ends. Argus Laetus Barcode reader, Nordson Series 3400V Glue unit. Machine sizes : 5030 x 1702 x 2032 mm(
1300 Kg ) , Elec: 480V/3Ph+PE/(kw/24VDC,
Ref 2469: PESTER PEWO-MAT 400SN collator shrink wrapper for cartons etc., with infeed conveyor, stacking unit, and PEWO-Therm
shrink tunnel, max. collation size 350 x 400 x 200 mm, (LxWxH), output up to 20 collations per minute. Year 1983
Ref 2430: SKINETTA PAC-SYSTEME ASK-300 bundler and stretch wrapper, output up to 32 packs per minute. Maximum reel width
300mm. Maximum final pack dimensions 380mm (W) x 360mm (L) x 290mm (H). Includes stacking unit. Year 1992
Ref 2131 : BFB 3728 automatic case erector/packer/sealer,1995, 200mm wide x 1000 mm long PVC belt conveyor, collator and
stacker, carton magazine ( pre-folded cartons), cartons opening, product is loaded into carton by pusher, cartons are sealed on front and
back with adhesive tape, 850 mm wide x 700 mm long discharge roller conveyor, safety guards, current equipment; laid down carton 500
mm x 360 mm x 200 mm, carton with 2x3x2 or 3 x3x3 or 3x3x4 configuration, capacity: laid down carton sizes Length from 220 to
600mm , width from 120 to 400 mm, height from 120 to 350 mm, max output : 8 to 10 cycles / min
Ref. 1867: TEMA 94/54 Packer/Palletizer, 1994, palletization, 4 boxes/min output
CRIMPER
Ref 2464:BOSCH VSR F01 closing machine for rubber bungs and aluminium crimp caps. Capacity up to 3,600 units per hour. Includes one
closing head for rubber bungs with vibratory feed bowl and track, one closing station for aluminium crimp caps with cap sorter and feed
track. Available change parts for bottles 49.5mm diameter x 120mm high. Year 1984
COMPLETE LINES
Ref 2884: Ampoule Packing line comprising Farmores Biores BR 140 cardboard tray forming machine, feeding automatically a Bosch
(Höfliger & Karg) Cartonetta horizontal cartoner. Includes handling parts for 1ml, 2ml, 5ml & 10ml standard ampoules, 5 per tray (and also
6 for 5ml) with automatic feeding and loading into the formed tray. Outfeed conveyor and automatic loading of a Bosch (Höfliger & Karg)
Cartonetta including leaflet feeder. Output up to 60 cartons per minute. Year 1997.
Ref 2798 : NERI – ROTA AMPOULE LINE Year : 1995, Current format for ampoule 1 and 2 ml, max output : 9000 ampoules/h , The line
includes : a NERI LV 105 A washing machine, a NERI NLT 40/S sterilizing tunnel, a ROTA R940 filling and sealing machine,
Ref 2822 : INOVA Syringe Line The line includes : 1- a Inova Syringe Filler Model VSVM4032 of 2001, Electrical: 480V 3Ph 60Hz
6Amps, designed to place tip, fill and stopper syringes, Current application is 6 and 12ml syringes, Dosing range is from 0.1 to 20ml,
depending on selected pump size, Dosing tolerance is 0.2-0.6ml srel= +/-1.5%, 0.6-1.0ml srel = +/-1.0%, 1.0-30.0ml srel = +/- 0.5%,
Processing Range max syringe diameter 21.5mm, max syringe length 125.0mm, Filling volume Maximal 20ml, Includes operating manual and
spare parts catalog. 2- a INOVA syringe Labeler/Plunger Inserter model EKK62 of 2000, Electrical: 480V 3Ph 60Hz 3X15Amps, designed
to label syringes and place plunger at speeds of 7,200 per hour for 6ml and 12ml, Labeler has one camera and a hot stamp for code and
expiration, Includes operating manual and spare parts catalog
Ref 2802 : Infusion solution production line for bottles comprising: 1- EUROWATER reverse osmosis (1992), approx. output: 3000 l/h,
one-step reverse osmosis, preparation of demineralized water. 2- FINN AQUA 750S6 destillation equipment (1994), capacity: 1600 l/h, 6
column destilation equipment, production WFI, option of producing sterile steam, with which the complete distribution and filling system
is sterilized. 3 – IMA LIBRA HYDRA 1300 automatic washing machine (2005), SIP system, max capacity: 90 bottles/min. 4 – GRONINGER
DFV 600 automatic filler (1992), 4 filling nozzles, filling volume: 100–500 ml, CIP – SIP system. 5 – GRONINGER KVG 201 automatic
plugging and capping machine (is part of the filling machine ). 6 – GETINGE AR2-GEV steam sterilizers (1985), machine dimensions:
900x900x5000, chamber volume: 5000 l, capacity: 1800 bottles at 500 ml, 2520 at 250 ml and 4710 at 100 ml, Sterilization by wet
steam, cooling by air which is cooled by water circulated in the jacket. 7 – GETINGE GE 6617 ARB-2 steam sterilizer of 2005, volume of
780 l, capacity: 12 000 to 14 000 plugs/h, sterilization of plugs, caps, work clothes… 8 – MARCHESINI (NERI) SPF 1 semi-automatic
inspection machine of 2004, effectively output: 2400 pcs/h, capacity: 3500 pcs/h, inspection on black background in diffused black light.
9 – MARCHESINI (NERI) SL 200 automatic labelling machine of 2004, capacity: 3500 pcs/h. 10 – MARCHESINI (NERI) SAMSA PACK
W 30 NA automatic cartoning machine of 2004, capacity: 12 000/7.5 h at 500 ml, 13 000/7.5 h at 250 ml and 14 000/7.5 h at 100 ml. 11 miscellaneous equipment as : air conditionning equipments, storage container …
Ref 2755 : VUMA vials filling line 1995, vials format: 3, 10, 20, 50 and 100 ml comprising: a washing machine type RSSV 01 6A, a
sterilization tunnel type RSSV 015A, a filling machine type RLSV 005A, output: 4000/ h at 3, 10 and 20 ml and 2000/ h at 50 and 100 ml
Ref 2787: IMA / GF Industrie STERILE FILLING LINE For Vials vials format: 100 ml (Ø49xH 108 mm), comprising : rotary table RT
120, Ø 1200 mm, Variable speed, conveyors, a HYDRA 1500 13C linear washer (2009), GMP, max output: 15600 vials/h, capacity: vials Ø
between 20 and 52 mm, min height 36 mm, recycled water circuit, PLC SIEMENS S7300, S/s laminar flow hood to be fit at machine
discharge, a BLUE GALAXY 1250 FLS sterilizing tunnel (2009), Max temperature: 350 °C, air temperature in cooling zone: 18 °C, infeed
zone with vertical air flow, 2 heating zones with vertical air flow, 2 cooling zones with vertical air flow, final containers temperature at
outfeed: 25 °C, Tunnel sizes: L 6910xl 2410xH 3124 mm (weight 9000 Kg), useful belt width: 1250 mm, useful heating zone surface: 2.80
m², useful cooling zone surface: 4.13 m², accumulation table Libra TCS , a GF Insutries (Italy) Model VFS MA 20/20/25 filler/ stopper,
2007, Max output at 100 ml: 6000 vials/h, with nitrogen/vacuum device and ejection system, CIP/SIP, Change parts for vials : Ø49 x H
104 (stopper Ø32), Ø52xH 94.5 (stopper Ø20), Ø46.5xH 68 (stopper Ø32), Ø42.5xH 73.5 (stopper Ø20), Electricity : 480 V / 60 Hz / 3
P, a GF Industries ( Italie ) Model Alu C8 crimper, 2007 , Change part for alu cap Diam 20 and 32 mm.
Ref 2743 : Tablet packing line comprising: a KING SC4 counter, 1980, 60 containers/min with 150 tablets/container and 20 containers/
min with 500 tablets, a FD engineering press on capper, 2005, output: 50 containers/min, previous format : container and cap Ø40 mm.
Ref 2628: BAUSCH & STRÖBEL sterile line for ampoule 1976, Current format : ampoules 5 and 10 ml, Max output : 12 000 ampoules /
h , This line includes :a BAUSCH & STROBEL AWU 8000 washer, with ultrasounds, pumps and recycling tank, power : 3,7 kW, washer
sizes : 1.75 x 2.10 x H 1.6 m, a BAUSCH & STROBEL DST 8000 inline sterilizing tunnel, with electric heating and cooling, power: 25 kW,
Tunnel sizes : 3.20 x 1.30 x H 1.80 m , a BAUSCH & STROBEL AFV 4005 rotary filler/sealer, Power : 1,2 kW, with 4 stations of prenitrogen, 4 stations of filling, 4 stations of nitrogen, 4 stations of pre-heating and 4 stations of sealing, Filler sizes : 1.60 x 2.10 x H 1.80
m, Total Line sizes : 6.60 x 2.10 x 1.80 m, stainless steel frame for all machines,
H²M Technologies
Négoce 15/01/15
COMPLETE LINES
Ref 2578: LIPSTICK FILLING LINE including a machine of casting for lipstick (Ø between 12 and 12.6 mm), a CL AUTO mechanism
loader, a ADMV mechanism palettizer of 1998, other equipments (platform, table, trolley…), machines output : 50 strokes / min
Ref. 1941: LIPSTICK FILLING LINE includes machine for stick, 19mm ø, 2400 pieces/h output, automate SCHNEIDER TSX micro with
Magelis and a assembling unit for stick ADMV
OTHER MACHINES
CREAM MIXERS
Ref 2887: BROGLI MH20C cream manufacturing plant, 1981, batch capacity: 20 litres, s/s mixing vessel with total volume of 25 L, mini
batch size: 5 L, vacuum/0.5 bar pressure, mixing vessel is raised and lowered via a mechanical screw jack which is operated manually using
a hand-wheel, quick release connections for heating and cooling media to the 10 litre jacket and a centre bottom outlet with valve for
emptying the vessel (mounted on 3 castors), cross head supports the mixing aggregates, homogeniser drive motor and vessel lid, two
speed for scraped stirrer and spiral mixer: 62/124 rpm, two speed for homogeniser: 1500/3000 rpm, the lid incorporates : a vertical
product temperature probe, a sight glass, a light sourceand three connections with valves, all contact parts in s/s, also included : BROGLI
TT-100 mobile 3 kW electrical heating and cooling aggregate, electrical installation : 380/415 V, 3 phases, 50 Hz,
Ref 2247: HAAGEN & RINAU SR 500 500 litre pressure vacuum process vessel for creams, 613 L total, pressure : 2 bar at 133 °C, s/s
double jacket: pressure 4 bars at 150 °C, UNIMIX mixing group at double movement, main agitator with scraper drove by motor 5 kW
415 V/3 P/50 Hz; lower entry homogenizer at 2 speeds, speed: 1460/2935 rpm, hydraulic group for the vessel tilt
MIXER
Ref 2910: Mixer/Blender Total about 400 liters, Working capacity 200 L, Variable speed.
Ref. 1945: PRATT GT Mixer, stainless steel vessel and agitator
GRANULATORS
Ref 2032: GLATT GPCG-5 Spray granulator, 1983, stainless steel, 3 different product bowls, 7” wurster coater, 22 L top spray, Roto
bowl, air handler/pre filtered heater, HEPA filtration, explosion proof, fast acting relief valves, rear vented, dust collector,
POWDER MIXERS, GRANULATORS
Ref 2814 : GEA AEROMATIC FIELDER Pharma Matrix PMA 25-65-100 high speed mixer/granulator in 316 grade s/s with mirror
polished finish. simple modular arrangement by attaching one of the three supplied interchangeable product bowls/ impeller/granulator
head, complete with its original user reference manual and a mobile cart containing several spares parts.
Ref 2815 : AEROMATIC FIELDER Pharma Matrix PMA 65 high speed mixer-granulator constructed in GMP quality 316 grade s/s with
mirror polished finish to all product contact surfaces, 1996, mixing bowl gross volume: approx 65 litres, nominal working capacity 25 kg,
The main (3 blades) mixing impeller is driven from a 7.5kw 415v non- flameproof motor, variable speed range 40-400 rpm. The 2 blade
side entry granulator is driven from a two speed 1.3kw 1500 rpm/1.8 kw 3000 rpm 415v non- flameproof motor. mixing bowl top cover with
a filter housing and an inflatable seal, activated automatically. wash-down system for both motor shaft seals. mixing bowl with an
external s/s heating/cooling jacket rated at 2 bar/80c max, < 7 litres/min. CASTELL key safety interlock devices fitted to the top cover
and product discharge valve access cover. machine control panel features: 2xmotor load amp-meters, granulator and main impeller speed
indicators, batch timer setting, 0-100deg C temperature indicator, discharge valve open/close, ... on castor
Ref 2775 : TK FIELDER PHARMA MIX PMA 400-2G Used high speed mixer/granulator, 1980’s, S/s design. Mixer has 400 l total and
about 320 l working volume of mixing/granulating chamber. Average batch weight up to 180 kg. Mixer with two agitators: impeller with
two rotation speeds 98 and 136 rpm. Bottom driven by gearbox and 22/30 kW motor, granulator with two rotation speeds 1500 and 3000
rpm, driven directly by 5.5/7.5 kW motor. Mixer is equipped with control panel, stainless steel structural framework and spare gearbox.
Ref. 1994: STOKES mixer / granulator
TABLET AND CAPSULE COUNTER
Ref 2866: CREMER Speciaalmachines CF830-Modell 2 counting machine, 1991, 8 counting channels, 2 counting heads, Container through
conveyor 2500 mm long, Rotary feed table, Counting speed up to 100mm/s/channel (slower on low counts), very simple since no change
parts or mechanical adjustments, in excellent operating condition.
Ref 2743 : Tablet packing line comprising a KING SC4 counter, 1980, 60 containers/min with 150 tablets ontainer and 20
containers/min with 500 tablets, electricity: 230 V, 1 P, 50 Hz, air: 6 bars, a FD engineering press on capper, 2005, output: 50 containers/
min, previous format : container and cap diameter 40 mm.
WASHING MACHINE
Ref 2861: LANCER 1600 PCM S/S Washer. Internal chamber dimensions :33 5/8" H X 27 3/4"D X 27 3/4" w. Stainless steel
construction, 208 volt, 3/60 hertz, new 2003
Ref 000: NETZSCH H02-2T washing & drying chamber, total volume 306 litre, size of chamber 610 x 670 x 750 mm, year 1994
Ref 1985: LANCER 1600 Washer, washing tank sizes : 680x700x900mm
STERILIZATION
Ref 2849: VOTSCH VFT 60/90 ventilated oven wiuth shelves, 2004, explosion proof, fitted with: door, inside of oven in stainless
steel, 5 s/s mesh shelves (580 x 560 mm), possibility of 10 shelves, temperature range from 0 to 200°C, Blower, compressed air, display
temperature, monted on 4 legs, inside sizes: w 600mm–D 600 mm-H 900 mm, useful volume: 350 L, oven sizes : 1.20x0.82x1.62 m.
Ref 2295: LYTZEN J1 Chamber oven, 1990, Inside dimensions: w 1500 x depth 1200 x H 1500 mm, outside: 1990 x 1400 x 2340 mm,
max temperature: 220 °C, filtration H13 type CAMFIL FRSI 200 2SIHT.
INSPECTION MACHINE
Ref 2908: MASCHINPEX semi-automatic visual inspection machine, 2004, format : syringe diam 6,85ml and 8,15ml.
Ref 2900: BOSCH KLD 1042 leak detection machine for ampoules or vials, year 2000/2001, max output : 24 000 / h, suitable for vials
or ampoule : diameter from 10 to 32 mm x H max 130 mm, current format parts : ampoules 1 / 2 ml Diam 10.75 mm, ampoules 5 ml diam
14.75 mm, ampoules 10 ml Diam 17.75 mm, flacons 6R diam 22 mm, flacons 10 R Diam 24, 20R.
H²M Technologies
Négoce 15/01/15
INSPECTION MACHINE ( continuation )
Ref 2897: SEIDENADER V90-AVSB-60L-R inspection machine for visual inspection of ampoules, vials, infusion bottles and pre-filled
syringes, 1995, max output : 150 / min (according to operateur performance ), range of sizes : 0,5 to 1000 ml, current format parts : vials
diameter 36 and 42 mm.
Ref 2894: SEIDENADER V 90-T inspection machine for visual inspection of ampoules, vials, infusion bottles and pre-filled syringes,
year 1995, Max output : 1500 / h ( according to operateur performance) , range of sizes : 0,5 to 1000 ml
Ref 2752 : EISAI EIS596 vial inspection machine. 1998, unit has rated capacity of 300 vial per min and can handle 2ml to 5ml vials.
includes (1) 54 station pre-spinner turret and (1) 54 station inspection turret. has (6) cameras detecting 2 vials at once for crimp, flip
top cover, fill height, particals and upper,lower and bottom of vials. unit includes in-feed station but no conveyors for in or out feed or
reject. includes control panel and some change parts. Size: 2 ml vial
Ref 2833 : SEIDENADER V90-AVSB/75-LR vial visual testing device for visual inspection of particles in vials, 1998 (2 available),
range of size 0,5 - 1000 ml according to change parts, output max. 150 /min, s/s style, from left to right, inclination of objects 75°, with
forced feeding conveyor, discharge over slide plate for tray loader magazins, 2 slide plates width (265 and 445 mm), display, printer,
Tyndall light sources 3x, magnifying lens 1x, mirror 1x from below, infrared sensor system with automatic bad discharge, vacuum
starwheel discharge, available change parts for vials Ø 21,5 mm, h=59 mm, Ø 22,25 mm, h=42 mm, Ø 24,0 mm, h=49 mm, Ø 20,75 mm,
with mentioned change parts output max. 100 /min, food switch, mobile, connection 230/400 V/50 Hz, CE mark, very good condition
Ref 1721 : EISAI AIM 581 SD electronic inspection macchine , 1991 , vials diameter : 29 and 23 mm
TANK
Ref 2868: Chaudronnerie Bauloise heated agitated tank, 1997, capacity: 1200 L, Pharma origin, in s/s polished, on brackets, Ø1200xH
1200 mm, calibrated valve 2.2 bars + Manometer (-1, +3 bars) with certificate, vacuum gauge -1 + 3 bars with certificate, cleaning head,
s/s gauge, water heated jacket, s/s heat insulator, RAYNERI disperser 1,5 kW , Typhon turbine PSVB Ø300 on shaft Ø35 x L 1390 mm,
electronics variable speed, control cabinet with avec ALTIVAR electronic speed drive, JUMO temperature recorder, JUMO controller.
Ref 2869: DAMBRUN s/s polished agitated tank , capacity 250 L, Ø 600xd 900 mm, pression 3 bars, light and window, Rayneri agitator
0.55 kW, electronic variable speed (757 - 2900 rpm), 2 propellers , 4 blades, s/s double jacket, pre-fitted for electrical heating, bottom
discharge, front outlet diameter 20 mm, on 3 castors.
OTHERS
Ref 2618: THERMO RAMSEY RXM ( Best 900 Series ) inline checkweigher, high quality machine, 2003, appears to be in UNUSED
condition. Electronic touch screen data panel. Central weighcell 140mm wide x 600mm long. Width adjustable gripper belts on product
infeed/outfeed. Stainless steel cabinet. 550 packs per min at 10g-500g, 300 packs per min at 2g-300g, Accuracy +/- 50mg at 3 sigma
Ref 2009: COLLISCHAN 241C checkweigher with air blast rejection, weighing range 3gm to 300gm, belt width 135mm, infeed and
outfeed belt length 260mm, weigh cell length 210mm, direction left to right, year 1989.
Ref 2008: PRISMA 09C3 inline checkweigher for shipping/display cartons and similar articles, weight range up to 26.88kg. Year 1998
Ref. 1933: RUSSEL Lifting hopper for caps, 2000, stainless steel
Ref. 1758: GARVEY Accumulation rectangular table for vials or similar, sizes : 2,80x1.60m
Ref. 1740: BERNAY AUTOMATION Spoon feeder, 150 strokes/min max output
Ref 2826 : GRONINGER MRT 100P Syringe Buffer, 2005, current format for syringe 1ml diameter 8.15 mm / BD Hypak 1ml long ,
machine sizes : 2.94 x 0.90 x 1.30 m, with syringe conveyor
Ref 2828 : Syringe conveyor 2005, dimensions : 3.45 x 0.50 x H (adjustable) 1 m, usable for a syringe dimater between 6 and 11 mm
Ref 2137 : NERI SF 105 Blowing machine for vials with Ø between 25 and 62 mm , 1994 , max output : 15 000 / h , 15 bottle holders on
each bar , with technical manual .
Ref 2877: LOMA Superscan horizontal metal detector, 1995, equipment : 1180 mm long x 200 mm wide PVC belt conveyor, check station,
rejection system with box of 30 liters, electronic control box, driven by gear reducer, mounted on stainless steel frame, capacity : max.
240 mm wide, max. 55 mm high, min. 0,8 mm steel detection, max air pressure: 4 bar, power : 0,18 kW, sizes : 1200 x 700 x 1050 mm .
Ref 2879: LOCK METALCHECK MET 30+ Digital metal detector, 2001, detection and removal of ferrous, non ferrous and stainless
steel metal contamination,for the control of tablets or capsules, with reject mechanism, full stainless steel construction, touchscreen
display available, complete mobility, max output : 30 000 tablets / min, electricity : 230 V, 50 Hz, Machine sizes : 750 x 550 x 850 mm,
detects ferrous contaminant up to 0.25 mm, non ferrous up to 0.3 mm, stainless steel up to 0.4 mm.
Ref 2889: GORING KERR DSP II horizontal métal detector, 1998, 1250 mm long x 200 mm wide pvc belt conveyor, check station,
rejection system with box, electronic control box, driven by gear reducer, mounted on stainless steel frame, capacity: max 240 mm wide,
max 150 mm high, min 0,8 mm steel detection, air pressure : 4 bar, power : 0,25 kW, sizes : 1.30 x 0.90 x 1.10 m ( 220 kg )
Ref 2407: SYBERMAT Comprising : a machine to remove syringe of NEST before entry in labeller, a machine to put syringes in NEST for
transfer to Blister packer , a machine to remove syringe of NEST before entry in blister packer
Ref 2789: EDWARDS LYOFLEX 06 S/s freeze dryer. 1994, CE Mark, unit has (2) 405mm wide x 610mm long shelves on 120mm centres
with stoppering device driven by 1hp, 415volt, 3/50, 1500rpm hydraulic pump. approximately 0.55sqmt heat transfer area. s/s chamber
measures approximately 812mm diameter x 673mm deep. chamber is rated 30 psi/full vacuum design pressure at 275 deg.f. with a mdmt
rating of 30 psi/full vacuum at -76 deg.f. unit has hinged clamped front door with davit arm attachment and sample thief device. has
stainless steel internal cip spray bars. includes (2) BITZER type S4T/5.2 compressors rated 19.7cumt/hr driven by 4kw, 415volt, 3/50,
1450rpm motor. includes CIP APV CREPACO model W40/20 pump driven by 5hp, 208/415volt, 30/50, 2890rpm motor. utilities required
cooling water @ 20 °C approximately 3,600 litre/hr, compressed air at 6 bar maximum and defrost water 250 litre @ 60 °C. steam
50kg/hr at 130 deg.c. unit includes electrical control cabinet, electrical cables, pipework and envair isolation booth, documentation
available, good condition, without vacuum pump
Ref 2619: USIFROID SMH601 stainless steel freeze dryer. has (4) approximately 620mm x 1550mm stainless steel shelves. thickness
of shelf is approximately 24mm. approximately 0.98 sqmt surface area per shelf. total surface area 3.92 sqmt. space between shelves
144mm. maximum ice capacity 100kg. minimum temperature minus 70 degc. driven by a 10kw motor, 1986
Ref 2649 : NORDSON Hot-melt gluing device , different models : A) NORDSON 3100V of 2002, very little used, B) NORDSON
multiscan 3400 of 1996
H²M Technologies
Négoce 15/01/15
OTHERS ( continuation )
Ref 2770 : HAPA DEF 310 printing machine, overhauled in 2005, opendate printing, max flat carton sizes : 300 x 250 mm, Machine
sizes : 1200 x 1100 x 1400 mm.
Ref 2823 : OPTIMA Denester, 2013 ( never used ), bought 600 000 euros, approx output : 300 syringes / min (approx. 2 tubs / min).
Function : nest conveying, unsealing station, lids disposal, tyvek liner disposal, non-compliant nests ejection, tubs denesting for the filler
feeding, stacking and evacuation of the empty nests (link to manufacturer website : http://www.optima-packaginggroup.de/opg/pharma_us/en/productfields/process.php5?tID=1&pID=1&prozID=7&UUUM=7 )
Ref 2837 : SCHNEIDER LEICHTBAU ROBUSTO FL350 GBK lifting and tilting system for drum, 2004, max loading capacity : 350 Kg,
without documentation
Ref 2839 : BOHLE PTH 250 Pharma lifter, 1991, Hydraulic lifter, s/s style, container holder with two mandrels, Ø 35 mm, length 525
mm, distance 600 mm, capacity 250 kg, lifting height appr. 1,10 m, incorporated batterie charger 230V/50Hz/110A, very good condition
Ref 2844 : BOHLE HS 400 lifting device, 1995, made of stainless steel, max. load 400 kg, entire height 2,65 m, with 2 pick-up pins, pin
distance 600 mm, pin-Ø 65/45 mm, pin length 390/660 mm, lifting height pin center-bottom appr. 1,80 m, electric container swivelling
device, electric chain drive, rotation vertical manually, good condition
Ref 2843B-C : BOHLE Pharma lifters : B – BOHLE PTH 250 of 1992, Hydraulic lifter, s/s style, capacity 250 kg, lifting height appr.
1,30 m, container holder with two mandrels, Ø 45 mm, length 525 mm, distance 600 mm (container holder dismantled), incorporated
batterie charger 230V/50Hz/110A, very good condition. C – BOHLE PH 200 EX of 1998, Hydraulic lifter, s/s, capacity 120 kg, lifting
height appr. 1,20 m, drum holder Ø 400 mm, rotatable, tiltable upwards , length of arm 820 mm, mobile, EEx eII CT4,
400V/50Hz/0,75kW, very good condition
PLEASE DO NOT HESITATE TO HAVE A LOOK ON OUR WEBSITE .
YOU WILL FIND SOME PICTURES AND/OR DATA SHEETS : www.h2m-technologies.com