Short Courses - UCLA Extension

Upcoming Programs
Electronics
Essential Steps for Signal Integrity
The speed of today’s logic devices creates PCB design challenges. If not designed correctly, you may be plagued with costly and time-consuming changes. Want the knowledge to
design and layout a high-speed PCB correctly the first time? This course helps you recognize problems with any proposed high-speed design, provides you with design rules and
design processes to ensure the PCB functions properly at the prototype stage, and emphasizes how to create a cost-competitive design without sacrificing high-speed integrity. Not
an introductory course, our expert presents material at a technical level geared toward experienced designers.
Instructor and Coordinator:
Robert Hanson, MSEE, Testability Overseer, Boeing Commercial Airline Products
Dates:
May 4-5 (Mon-Tues)
Reg #:255609
Course No:881.293
Units: 1.2 CEU (12 hours of instruction)
Fee: Through April 4: $2,545 | After: $2,795
Technical Management
89th Technical Management Program (TMP)
16295-15 Not printed at state expense. Printed with green ink on recycled paper.
89th Technical Management Program
Mar 22-27
Technical Management
May 4-5
Electronics
Essential Steps for Signal Integrity Course
DSP for Communication Systems
Software Defined Radio
Digital Avionics Systems
Modern Microwave Antenna Measurements
Avionics Data Buses
Apr 22-24 Apr 29-May 1
May 6-8
May 12-15
May 27-29
Communications & Sensors Engineering
Robust Control: Toolbox, Theory, and Applications
Kalman Filtering: Theory and Applications
Fundamentals of Cryogenics
Apr 6-8 Apr 13-16
Jun 3-5 Aerospace & Mechanical Engineering
Spring 2015 Short Courses
Dates:
Mar 22-27 (Sun-Fri)
Reg#:253394
Course No:850
Units: 4.0 CEU (40 hours of instruction)
Fee:
Through Feb 22: $3,775 | After: $4,195
10995 Le Conte Avenue, Suite 315, Los Angeles, CA 90024-1333
TMP is one of the most invigorating leadership training programs in the world. In just 5 days,
this program develops managers into strong leaders. Tailored for engineers, IT professionals,
and other managers working in technical fields, TMP presents a blend of technical and managerial information to improve personal and organizational performance. Discover new ways
to solve problems, plan strategies, and motivate colleagues. When you take TMP, you’re
inspired to succeed. Please visit uclaextension.edu/tmp.
Engineering & Technology
Short Courses
Spring 2015
Technology changes rapidly. Do more than just keep up. Create, innovate, and
drive the technology of tomorrow.
Taking a UCLA Extension Short Course is the fastest way to learn highly technical content and the latest trends. Taught by the best minds from academia and
industry, our specialized courses present technical and practical knowledge that
you can apply immediately. What’s even better, our Short Courses:
• Deliver the detailed knowledge you need in 5 days or less
• Give you access to industry experts
• Encourage interactive discussion
• Provide networking opportunities with professionals from across the U.S. &
around the world
• Help you to improve project collaborations & processes so you see results
• Allow you to send 4 attendees for the cost of 3 with our Team Advantage*
Short Courses are worth the investment. Sign up today for the course that will
accelerate your projects and career.
Enroll Early to Save up to 10%!
uclaextension.edu/shortcoursesBR
Aerospace & Mechanical Engineering
Apr 6-8 Apr 13-16
Jun 3-5 Robust Control: Toolbox, Theory, and Applications
Kalman Filtering: Theory and Applications
Fundamentals of Cryogenics
Communications & Sensors Engineering
Apr 22-24 Apr 29-May 1
May 6-8
May 12-15
May 27-29
DSP for Communication Systems
Software Defined Radio
Digital Avionics Systems
Modern Microwave Antenna Measurements
Avionics Data Buses
Electronics
May 4-5
Essential Steps for Signal Integrity
Technical Management
Mar 22-27
89th Technical Management Program
For more information call the Short Courses Program Office at (310) 825-3344
or email [email protected] today.
All courses held at UCLA Extension or on the UCLA campus.
Course fee includes course materials.
*Visit uclaextension.edu/shortcoursesBR for more information.
Aerospace & Mechanical
Engineering
Robust Control: Toolbox, Theory, and
Applications
Explore the background and basics of Robust
Control Toolbox, including robust control modeling,
robust control analysis, and robust control synthesis. Learn why this theory and its related tools are
the ultimate control analysis and synthesis methodology to capture the issues of system uncertainty, stability, performance, and the essential
trade-offs between them. Review numerous reallife aerospace design examples, such as spacecraft attitude control, supermaneuverable fighter
flight control, large space structure vibration control, and disk drive suspension servo control.
Course includes hands-on experience.
Coordinator and Lecturer:
Richard Y. Chiang, PhD, Boeing, Technical
Fellow, Flight and Control Engineering
Department, Space and Intelligence Systems,
Boeing, El Segundo, California
Dates: Apr 6-8 (Mon-Wed)
Reg #:255578
Course No: 878.12
Units: 1.8 CEU (18 hours of instruction)
Fee: Through March 6: $2,905
After: $3,195
Kalman Filtering: Theory and Applications
The Kalman filter is probably the most successful
and widely-used part of “modern control theory”
and a central piece of the algorithm for many
applications. Learn to design Kalman filters for
various fields; analyze the performance; develop
the system, hardware, and software architecture;
and resolve problems encountered in system integration, validation, and verification. Course
includes basic theory, hands-on experience
through computer lab sessions using MATLAB,
and case studies that illustrate Kalman Theory in
applications, including GPS navigation, integrated
inertial navigation, precision navigation using GPS
carrier-phase, spacecraft stellar-inertial attitude
determination, precision clock, and radar/laser
target tracking.
Coordinator and Lecturer
Rongsheng (Ken) Li, PhD, Boeing Senior
Technical Fellow, Boeing Integrated Defense
Systems, El Segundo, California.
Dates: Apr 13-16 (Mon-Thurs)
Reg #:255582
Course No: 885.177
Units: 2.4 CEU (24 hours of instruction)
Fee: Through March 13 $3,269
After: $3,595
Fundamentals of Cryogenics
Software-Defined Radio
Modern Microwave Antenna Measurements
Understand the fundamentals of cryogenics with
overviews of cryogenic material and cryogens,
heat transfer, and thermodynamics at low temperatures. Explore cryogenics applications in cryopreservation, medical fields, transportation, energy
related fields, aerospace/military and material processes. Topics include: gas separation and liquefaction; solid state and fluid type cryocoolers;
instrumentation and the design of cryogenic
equipment plus superfluidity and superconductivity. The course also covers cryogenic safety and
how it can prevent expensive design/material failures, physical injury and even death.
Learn the architectures of legacy radio systems
and the new architectures based on
DSP capabilities as well as the flexibility afforded
the software-defined radio (SDR) by multirate
signal processing techniques. Real-time
MATLAB simulations illustrate essential concepts for a number of SDR systems. The course
uses GNU radio, a low-cost way to start working with SDRs, to demonstrate many of the
important SDR concepts. The Ettus Research
Universal Software Radio Peripheral (USRP)
product family serves as the platform to illustrate
the flexibility of the software-hardware interface.
Join global industry peers, thought leaders, and
researchers innovating microwave antenna measurement methodologies, designs, and applications for a 4-day intensive course. Topics include
the design, use, and evaluation of all capabilities
used for antenna measurements, including outdoor ranges, compact ranges, anechoic chambers, and all near-field scanning methods in
current use. Includes a tour of the UCLA
Antenna Range.
Coordinator and Lecturer
Coordinator and Lecturer
Sidney Yuan, PhD, Sr. Engineering Specialist, The
Aerospace Corporation, Los Angeles, California.
fredric j. harris, PhD, Cubic Signal Processing
Chair Professor of Electrical and
Computer Engineering, San Diego State
University, California.
Dates: Jun 3-5 (Wed-Fri)
Reg #:255612
Course No:878.40
Units: 1.8 CEU (18 hours of instruction)
Fee: Through May 3: $2,905
After: $3,195
Communications & Sensors
Engineering
DSP for Communication Systems
Learn how to implement engineering functions in a
cost-effective way by using computational means
instead of analog hardware. This course emphasizes communication systems where traditional
applications, such as modulation/demodulation,
channelization, channel equalization, synchronization, and frequency synthesis, are now being
implemented with new digital signal processing
techniques to achieve high performance. Analyze
these techniques, including multirate filters, I-Q
sampling, sigma-delta modulators, and conversion
between I-Q and real signals. Focus on real-world
systems using modern DSP methods. Concepts
illustrated with MATLAB demonstrations.
Coordinator and Lecturer
fredric j. harris, PhD, Cubic Signal Processing
Chair Professor of Electrical and
Computer Engineering, San Diego State
University, California.
Dates: Apr 22-24 (Wed-Fri)
Reg #:255585
Course No: 881.244
Units: 1.8 CEU (18 hours of instruction)
Fee: Through Mar 22: $2,905
After: $3,195
Lecturer
Thomas Rondeau, PhD, GNU Radio maintainer
and consultant, Philadelphia, Pennsylvania.
Dates: Apr 29-May 1 (Wed-Fri)
Reg #:255584
Course No: 881.275
Units: 1.8 CEU (18 hours of instruction)
Fee: Through Mar 29: $2,905
After: $3,195
Digital Avionics Systems
Learn the avionics system design requirements
for aircraft/mission objectives and standards,
and the use of top-level design tools. Topics
include: the building blocks of avionics systems
(data buses, displays, and software), avionics
program management, system assessment and
verification, and software development and validation. Review current digital avionics systems
such as those in the B-777 Airplane Information
Management System (AIMS) and B-787 for civil
passenger aircraft for insight into real-world
practices, and gain an insider’s perspective on
emerging design concepts with a unique focus
on the system level and its practical application.
Coordinators and Lecturers
Michael J. Morgan, Founder and President,
Pinnacle Aerospace, Inc., Phoenix, Arizona.
Bob Witwer, Vice President of Advanced
Technology, Honeywell Aerospace, Phoenix,
Arizona.
Dates: May 6-8 (Wed-Fri)
Reg #:255610
Course No: 867.106
Units: 1.8 CEU (18 hours of instruction)
Fee: Through April 6: $2,905
After: $3,195
Coordinator and Lecturer
(See website for additional lecturers)
Yahya Rahmat-Samii, PhD, Distinguished
Professor of the Northrop-Grumman Chair in
Electromagnetics. Electrical Engineering
Department, Henry Samueli School of
Engineering and Applied Science, UCLA.
Dates:
May 12-15 (Tues-Fri)
Reg #:253088
Course No: 881.239
Units: 2.4 CEU (24 hours of instruction)
Fee: Through April 12: $3,269
After: $3,595
Avionics Data Buses
Learn the buses that are fundamental to the
function of both military and commercial aircraft.
This course provides a broad overview of data
bus technology with emphasis on the major
buses—MIL-STD-1553 and ARINC 429—found
in most modern military and civil aircraft and
which, despite their age, continue to be used in
newer aircraft as well. Topics include basic bus
structure and control, word description, redundancy, and fault tolerance. Internationally recognized experts, who have guided the evolution of
these buses from their very beginning, lead
these discussions.
Coordinators and Lecturers
Daniel A. Martinec, Retired Technical Director,
Industry Activities, ARINC, Annapolis, Maryland.
Chris deLong, MSEE, Staff Engineer,
Honeywell Aerospace, Albuquerque, New
Mexico
Dates: May 27-29 (Wed-Fri)
Reg #:255611
Course No: 867.168
Units: 1.8 CEU (18 hours of instruction)
Fee: Through April 27: $2,905
After: $3,195
Technology changes rapidly. Do more than just keep up. Create, innovate, and
drive the technology of tomorrow.
Taking a UCLA Extension Short Course is the fastest way to learn highly technical content and the latest trends. Taught by the best minds from academia and
industry, our specialized courses present technical and practical knowledge that
you can apply immediately. What’s even better, our Short Courses:
• Deliver the detailed knowledge you need in 5 days or less
• Give you access to industry experts
• Encourage interactive discussion
• Provide networking opportunities with professionals from across the U.S. &
around the world
• Help you to improve project collaborations & processes so you see results
• Allow you to send 4 attendees for the cost of 3 with our Team Advantage*
Short Courses are worth the investment. Sign up today for the course that will
accelerate your projects and career.
Enroll Early to Save up to 10%!
uclaextension.edu/shortcoursesBR
Aerospace & Mechanical Engineering
Apr 6-8 Apr 13-16
Jun 3-5 Robust Control: Toolbox, Theory, and Applications
Kalman Filtering: Theory and Applications
Fundamentals of Cryogenics
Communications & Sensors Engineering
Apr 22-24 Apr 29-May 1
May 6-8
May 12-15
May 27-29
DSP for Communication Systems
Software Defined Radio
Digital Avionics Systems
Modern Microwave Antenna Measurements
Avionics Data Buses
Electronics
May 4-5
Essential Steps for Signal Integrity
Technical Management
Mar 22-27
89th Technical Management Program
For more information call the Short Courses Program Office at (310) 825-3344
or email [email protected] today.
All courses held at UCLA Extension or on the UCLA campus.
Course fee includes course materials.
*Visit uclaextension.edu/shortcoursesBR for more information.
Aerospace & Mechanical
Engineering
Robust Control: Toolbox, Theory, and
Applications
Explore the background and basics of Robust
Control Toolbox, including robust control modeling,
robust control analysis, and robust control synthesis. Learn why this theory and its related tools are
the ultimate control analysis and synthesis methodology to capture the issues of system uncertainty, stability, performance, and the essential
trade-offs between them. Review numerous reallife aerospace design examples, such as spacecraft attitude control, supermaneuverable fighter
flight control, large space structure vibration control, and disk drive suspension servo control.
Course includes hands-on experience.
Coordinator and Lecturer:
Richard Y. Chiang, PhD, Boeing, Technical
Fellow, Flight and Control Engineering
Department, Space and Intelligence Systems,
Boeing, El Segundo, California
Dates: Apr 6-8 (Mon-Wed)
Reg #:255578
Course No: 878.12
Units: 1.8 CEU (18 hours of instruction)
Fee: Through March 6: $2,905
After: $3,195
Kalman Filtering: Theory and Applications
The Kalman filter is probably the most successful
and widely-used part of “modern control theory”
and a central piece of the algorithm for many
applications. Learn to design Kalman filters for
various fields; analyze the performance; develop
the system, hardware, and software architecture;
and resolve problems encountered in system integration, validation, and verification. Course
includes basic theory, hands-on experience
through computer lab sessions using MATLAB,
and case studies that illustrate Kalman Theory in
applications, including GPS navigation, integrated
inertial navigation, precision navigation using GPS
carrier-phase, spacecraft stellar-inertial attitude
determination, precision clock, and radar/laser
target tracking.
Coordinator and Lecturer
Rongsheng (Ken) Li, PhD, Boeing Senior
Technical Fellow, Boeing Integrated Defense
Systems, El Segundo, California.
Dates: Apr 13-16 (Mon-Thurs)
Reg #:255582
Course No: 885.177
Units: 2.4 CEU (24 hours of instruction)
Fee: Through March 13 $3,269
After: $3,595
Fundamentals of Cryogenics
Software-Defined Radio
Modern Microwave Antenna Measurements
Understand the fundamentals of cryogenics with
overviews of cryogenic material and cryogens,
heat transfer, and thermodynamics at low temperatures. Explore cryogenics applications in cryopreservation, medical fields, transportation, energy
related fields, aerospace/military and material processes. Topics include: gas separation and liquefaction; solid state and fluid type cryocoolers;
instrumentation and the design of cryogenic
equipment plus superfluidity and superconductivity. The course also covers cryogenic safety and
how it can prevent expensive design/material failures, physical injury and even death.
Learn the architectures of legacy radio systems
and the new architectures based on
DSP capabilities as well as the flexibility afforded
the software-defined radio (SDR) by multirate
signal processing techniques. Real-time
MATLAB simulations illustrate essential concepts for a number of SDR systems. The course
uses GNU radio, a low-cost way to start working with SDRs, to demonstrate many of the
important SDR concepts. The Ettus Research
Universal Software Radio Peripheral (USRP)
product family serves as the platform to illustrate
the flexibility of the software-hardware interface.
Join global industry peers, thought leaders, and
researchers innovating microwave antenna measurement methodologies, designs, and applications for a 4-day intensive course. Topics include
the design, use, and evaluation of all capabilities
used for antenna measurements, including outdoor ranges, compact ranges, anechoic chambers, and all near-field scanning methods in
current use. Includes a tour of the UCLA
Antenna Range.
Coordinator and Lecturer
Coordinator and Lecturer
Sidney Yuan, PhD, Sr. Engineering Specialist, The
Aerospace Corporation, Los Angeles, California.
fredric j. harris, PhD, Cubic Signal Processing
Chair Professor of Electrical and
Computer Engineering, San Diego State
University, California.
Dates: Jun 3-5 (Wed-Fri)
Reg #:255612
Course No:878.40
Units: 1.8 CEU (18 hours of instruction)
Fee: Through May 3: $2,905
After: $3,195
Communications & Sensors
Engineering
DSP for Communication Systems
Learn how to implement engineering functions in a
cost-effective way by using computational means
instead of analog hardware. This course emphasizes communication systems where traditional
applications, such as modulation/demodulation,
channelization, channel equalization, synchronization, and frequency synthesis, are now being
implemented with new digital signal processing
techniques to achieve high performance. Analyze
these techniques, including multirate filters, I-Q
sampling, sigma-delta modulators, and conversion
between I-Q and real signals. Focus on real-world
systems using modern DSP methods. Concepts
illustrated with MATLAB demonstrations.
Coordinator and Lecturer
fredric j. harris, PhD, Cubic Signal Processing
Chair Professor of Electrical and
Computer Engineering, San Diego State
University, California.
Dates: Apr 22-24 (Wed-Fri)
Reg #:255585
Course No: 881.244
Units: 1.8 CEU (18 hours of instruction)
Fee: Through Mar 22: $2,905
After: $3,195
Lecturer
Thomas Rondeau, PhD, GNU Radio maintainer
and consultant, Philadelphia, Pennsylvania.
Dates: Apr 29-May 1 (Wed-Fri)
Reg #:255584
Course No: 881.275
Units: 1.8 CEU (18 hours of instruction)
Fee: Through Mar 29: $2,905
After: $3,195
Digital Avionics Systems
Learn the avionics system design requirements
for aircraft/mission objectives and standards,
and the use of top-level design tools. Topics
include: the building blocks of avionics systems
(data buses, displays, and software), avionics
program management, system assessment and
verification, and software development and validation. Review current digital avionics systems
such as those in the B-777 Airplane Information
Management System (AIMS) and B-787 for civil
passenger aircraft for insight into real-world
practices, and gain an insider’s perspective on
emerging design concepts with a unique focus
on the system level and its practical application.
Coordinators and Lecturers
Michael J. Morgan, Founder and President,
Pinnacle Aerospace, Inc., Phoenix, Arizona.
Bob Witwer, Vice President of Advanced
Technology, Honeywell Aerospace, Phoenix,
Arizona.
Dates: May 6-8 (Wed-Fri)
Reg #:255610
Course No: 867.106
Units: 1.8 CEU (18 hours of instruction)
Fee: Through April 6: $2,905
After: $3,195
Coordinator and Lecturer
(See website for additional lecturers)
Yahya Rahmat-Samii, PhD, Distinguished
Professor of the Northrop-Grumman Chair in
Electromagnetics. Electrical Engineering
Department, Henry Samueli School of
Engineering and Applied Science, UCLA.
Dates:
May 12-15 (Tues-Fri)
Reg #:253088
Course No: 881.239
Units: 2.4 CEU (24 hours of instruction)
Fee: Through April 12: $3,269
After: $3,595
Avionics Data Buses
Learn the buses that are fundamental to the
function of both military and commercial aircraft.
This course provides a broad overview of data
bus technology with emphasis on the major
buses—MIL-STD-1553 and ARINC 429—found
in most modern military and civil aircraft and
which, despite their age, continue to be used in
newer aircraft as well. Topics include basic bus
structure and control, word description, redundancy, and fault tolerance. Internationally recognized experts, who have guided the evolution of
these buses from their very beginning, lead
these discussions.
Coordinators and Lecturers
Daniel A. Martinec, Retired Technical Director,
Industry Activities, ARINC, Annapolis, Maryland.
Chris deLong, MSEE, Staff Engineer,
Honeywell Aerospace, Albuquerque, New
Mexico
Dates: May 27-29 (Wed-Fri)
Reg #:255611
Course No: 867.168
Units: 1.8 CEU (18 hours of instruction)
Fee: Through April 27: $2,905
After: $3,195
Technology changes rapidly. Do more than just keep up. Create, innovate, and
drive the technology of tomorrow.
Taking a UCLA Extension Short Course is the fastest way to learn highly technical content and the latest trends. Taught by the best minds from academia and
industry, our specialized courses present technical and practical knowledge that
you can apply immediately. What’s even better, our Short Courses:
• Deliver the detailed knowledge you need in 5 days or less
• Give you access to industry experts
• Encourage interactive discussion
• Provide networking opportunities with professionals from across the U.S. &
around the world
• Help you to improve project collaborations & processes so you see results
• Allow you to send 4 attendees for the cost of 3 with our Team Advantage*
Short Courses are worth the investment. Sign up today for the course that will
accelerate your projects and career.
Enroll Early to Save up to 10%!
uclaextension.edu/shortcoursesBR
Aerospace & Mechanical Engineering
Apr 6-8 Apr 13-16
Jun 3-5 Robust Control: Toolbox, Theory, and Applications
Kalman Filtering: Theory and Applications
Fundamentals of Cryogenics
Communications & Sensors Engineering
Apr 22-24 Apr 29-May 1
May 6-8
May 12-15
May 27-29
DSP for Communication Systems
Software Defined Radio
Digital Avionics Systems
Modern Microwave Antenna Measurements
Avionics Data Buses
Electronics
May 4-5
Essential Steps for Signal Integrity
Technical Management
Mar 22-27
89th Technical Management Program
For more information call the Short Courses Program Office at (310) 825-3344
or email [email protected] today.
All courses held at UCLA Extension or on the UCLA campus.
Course fee includes course materials.
*Visit uclaextension.edu/shortcoursesBR for more information.
Aerospace & Mechanical
Engineering
Robust Control: Toolbox, Theory, and
Applications
Explore the background and basics of Robust
Control Toolbox, including robust control modeling,
robust control analysis, and robust control synthesis. Learn why this theory and its related tools are
the ultimate control analysis and synthesis methodology to capture the issues of system uncertainty, stability, performance, and the essential
trade-offs between them. Review numerous reallife aerospace design examples, such as spacecraft attitude control, supermaneuverable fighter
flight control, large space structure vibration control, and disk drive suspension servo control.
Course includes hands-on experience.
Coordinator and Lecturer:
Richard Y. Chiang, PhD, Boeing, Technical
Fellow, Flight and Control Engineering
Department, Space and Intelligence Systems,
Boeing, El Segundo, California
Dates: Apr 6-8 (Mon-Wed)
Reg #:255578
Course No: 878.12
Units: 1.8 CEU (18 hours of instruction)
Fee: Through March 6: $2,905
After: $3,195
Kalman Filtering: Theory and Applications
The Kalman filter is probably the most successful
and widely-used part of “modern control theory”
and a central piece of the algorithm for many
applications. Learn to design Kalman filters for
various fields; analyze the performance; develop
the system, hardware, and software architecture;
and resolve problems encountered in system integration, validation, and verification. Course
includes basic theory, hands-on experience
through computer lab sessions using MATLAB,
and case studies that illustrate Kalman Theory in
applications, including GPS navigation, integrated
inertial navigation, precision navigation using GPS
carrier-phase, spacecraft stellar-inertial attitude
determination, precision clock, and radar/laser
target tracking.
Coordinator and Lecturer
Rongsheng (Ken) Li, PhD, Boeing Senior
Technical Fellow, Boeing Integrated Defense
Systems, El Segundo, California.
Dates: Apr 13-16 (Mon-Thurs)
Reg #:255582
Course No: 885.177
Units: 2.4 CEU (24 hours of instruction)
Fee: Through March 13 $3,269
After: $3,595
Fundamentals of Cryogenics
Software-Defined Radio
Modern Microwave Antenna Measurements
Understand the fundamentals of cryogenics with
overviews of cryogenic material and cryogens,
heat transfer, and thermodynamics at low temperatures. Explore cryogenics applications in cryopreservation, medical fields, transportation, energy
related fields, aerospace/military and material processes. Topics include: gas separation and liquefaction; solid state and fluid type cryocoolers;
instrumentation and the design of cryogenic
equipment plus superfluidity and superconductivity. The course also covers cryogenic safety and
how it can prevent expensive design/material failures, physical injury and even death.
Learn the architectures of legacy radio systems
and the new architectures based on
DSP capabilities as well as the flexibility afforded
the software-defined radio (SDR) by multirate
signal processing techniques. Real-time
MATLAB simulations illustrate essential concepts for a number of SDR systems. The course
uses GNU radio, a low-cost way to start working with SDRs, to demonstrate many of the
important SDR concepts. The Ettus Research
Universal Software Radio Peripheral (USRP)
product family serves as the platform to illustrate
the flexibility of the software-hardware interface.
Join global industry peers, thought leaders, and
researchers innovating microwave antenna measurement methodologies, designs, and applications for a 4-day intensive course. Topics include
the design, use, and evaluation of all capabilities
used for antenna measurements, including outdoor ranges, compact ranges, anechoic chambers, and all near-field scanning methods in
current use. Includes a tour of the UCLA
Antenna Range.
Coordinator and Lecturer
Coordinator and Lecturer
Sidney Yuan, PhD, Sr. Engineering Specialist, The
Aerospace Corporation, Los Angeles, California.
fredric j. harris, PhD, Cubic Signal Processing
Chair Professor of Electrical and
Computer Engineering, San Diego State
University, California.
Dates: Jun 3-5 (Wed-Fri)
Reg #:255612
Course No:878.40
Units: 1.8 CEU (18 hours of instruction)
Fee: Through May 3: $2,905
After: $3,195
Communications & Sensors
Engineering
DSP for Communication Systems
Learn how to implement engineering functions in a
cost-effective way by using computational means
instead of analog hardware. This course emphasizes communication systems where traditional
applications, such as modulation/demodulation,
channelization, channel equalization, synchronization, and frequency synthesis, are now being
implemented with new digital signal processing
techniques to achieve high performance. Analyze
these techniques, including multirate filters, I-Q
sampling, sigma-delta modulators, and conversion
between I-Q and real signals. Focus on real-world
systems using modern DSP methods. Concepts
illustrated with MATLAB demonstrations.
Coordinator and Lecturer
fredric j. harris, PhD, Cubic Signal Processing
Chair Professor of Electrical and
Computer Engineering, San Diego State
University, California.
Dates: Apr 22-24 (Wed-Fri)
Reg #:255585
Course No: 881.244
Units: 1.8 CEU (18 hours of instruction)
Fee: Through Mar 22: $2,905
After: $3,195
Lecturer
Thomas Rondeau, PhD, GNU Radio maintainer
and consultant, Philadelphia, Pennsylvania.
Dates: Apr 29-May 1 (Wed-Fri)
Reg #:255584
Course No: 881.275
Units: 1.8 CEU (18 hours of instruction)
Fee: Through Mar 29: $2,905
After: $3,195
Digital Avionics Systems
Learn the avionics system design requirements
for aircraft/mission objectives and standards,
and the use of top-level design tools. Topics
include: the building blocks of avionics systems
(data buses, displays, and software), avionics
program management, system assessment and
verification, and software development and validation. Review current digital avionics systems
such as those in the B-777 Airplane Information
Management System (AIMS) and B-787 for civil
passenger aircraft for insight into real-world
practices, and gain an insider’s perspective on
emerging design concepts with a unique focus
on the system level and its practical application.
Coordinators and Lecturers
Michael J. Morgan, Founder and President,
Pinnacle Aerospace, Inc., Phoenix, Arizona.
Bob Witwer, Vice President of Advanced
Technology, Honeywell Aerospace, Phoenix,
Arizona.
Dates: May 6-8 (Wed-Fri)
Reg #:255610
Course No: 867.106
Units: 1.8 CEU (18 hours of instruction)
Fee: Through April 6: $2,905
After: $3,195
Coordinator and Lecturer
(See website for additional lecturers)
Yahya Rahmat-Samii, PhD, Distinguished
Professor of the Northrop-Grumman Chair in
Electromagnetics. Electrical Engineering
Department, Henry Samueli School of
Engineering and Applied Science, UCLA.
Dates:
May 12-15 (Tues-Fri)
Reg #:253088
Course No: 881.239
Units: 2.4 CEU (24 hours of instruction)
Fee: Through April 12: $3,269
After: $3,595
Avionics Data Buses
Learn the buses that are fundamental to the
function of both military and commercial aircraft.
This course provides a broad overview of data
bus technology with emphasis on the major
buses—MIL-STD-1553 and ARINC 429—found
in most modern military and civil aircraft and
which, despite their age, continue to be used in
newer aircraft as well. Topics include basic bus
structure and control, word description, redundancy, and fault tolerance. Internationally recognized experts, who have guided the evolution of
these buses from their very beginning, lead
these discussions.
Coordinators and Lecturers
Daniel A. Martinec, Retired Technical Director,
Industry Activities, ARINC, Annapolis, Maryland.
Chris deLong, MSEE, Staff Engineer,
Honeywell Aerospace, Albuquerque, New
Mexico
Dates: May 27-29 (Wed-Fri)
Reg #:255611
Course No: 867.168
Units: 1.8 CEU (18 hours of instruction)
Fee: Through April 27: $2,905
After: $3,195
Upcoming Programs
Electronics
Essential Steps for Signal Integrity
The speed of today’s logic devices creates PCB design challenges. If not designed correctly, you may be plagued with costly and time-consuming changes. Want the knowledge to
design and layout a high-speed PCB correctly the first time? This course helps you recognize problems with any proposed high-speed design, provides you with design rules and
design processes to ensure the PCB functions properly at the prototype stage, and emphasizes how to create a cost-competitive design without sacrificing high-speed integrity. Not
an introductory course, our expert presents material at a technical level geared toward experienced designers.
Instructor and Coordinator:
Robert Hanson, MSEE, Testability Overseer, Boeing Commercial Airline Products
Dates:
May 4-5 (Mon-Tues)
Reg #:255609
Course No:881.293
Units: 1.2 CEU (12 hours of instruction)
Fee: Through April 4: $2,545 | After: $2,795
Technical Management
89th Technical Management Program (TMP)
16295-15 Not printed at state expense. Printed with green ink on recycled paper.
89th Technical Management Program
Mar 22-27
Technical Management
May 4-5
Electronics
Essential Steps for Signal Integrity Course
DSP for Communication Systems
Software Defined Radio
Digital Avionics Systems
Modern Microwave Antenna Measurements
Avionics Data Buses
Apr 22-24 Apr 29-May 1
May 6-8
May 12-15
May 27-29
Communications & Sensors Engineering
Robust Control: Toolbox, Theory, and Applications
Kalman Filtering: Theory and Applications
Fundamentals of Cryogenics
Apr 6-8 Apr 13-16
Jun 3-5 Aerospace & Mechanical Engineering
Spring 2015 Short Courses
Dates:
Mar 22-27 (Sun-Fri)
Reg#:253394
Course No:850
Units: 4.0 CEU (40 hours of instruction)
Fee:
Through Feb 22: $3,775 | After: $4,195
10995 Le Conte Avenue, Suite 315, Los Angeles, CA 90024-1333
TMP is one of the most invigorating leadership training programs in the world. In just 5 days,
this program develops managers into strong leaders. Tailored for engineers, IT professionals,
and other managers working in technical fields, TMP presents a blend of technical and managerial information to improve personal and organizational performance. Discover new ways
to solve problems, plan strategies, and motivate colleagues. When you take TMP, you’re
inspired to succeed. Please visit uclaextension.edu/tmp.
Engineering & Technology
Short Courses
Spring 2015
Upcoming Programs
Electronics
Essential Steps for Signal Integrity
The speed of today’s logic devices creates PCB design challenges. If not designed correctly, you may be plagued with costly and time-consuming changes. Want the knowledge to
design and layout a high-speed PCB correctly the first time? This course helps you recognize problems with any proposed high-speed design, provides you with design rules and
design processes to ensure the PCB functions properly at the prototype stage, and emphasizes how to create a cost-competitive design without sacrificing high-speed integrity. Not
an introductory course, our expert presents material at a technical level geared toward experienced designers.
Instructor and Coordinator:
Robert Hanson, MSEE, Testability Overseer, Boeing Commercial Airline Products
Dates:
May 4-5 (Mon-Tues)
Reg #:255609
Course No:881.293
Units: 1.2 CEU (12 hours of instruction)
Fee: Through April 4: $2,545 | After: $2,795
Technical Management
89th Technical Management Program (TMP)
16295-15 Not printed at state expense. Printed with green ink on recycled paper.
89th Technical Management Program
Mar 22-27
Technical Management
May 4-5
Electronics
Essential Steps for Signal Integrity Course
DSP for Communication Systems
Software Defined Radio
Digital Avionics Systems
Modern Microwave Antenna Measurements
Avionics Data Buses
Apr 22-24 Apr 29-May 1
May 6-8
May 12-15
May 27-29
Communications & Sensors Engineering
Robust Control: Toolbox, Theory, and Applications
Kalman Filtering: Theory and Applications
Fundamentals of Cryogenics
Apr 6-8 Apr 13-16
Jun 3-5 Aerospace & Mechanical Engineering
Spring 2015 Short Courses
Dates:
Mar 22-27 (Sun-Fri)
Reg#:253394
Course No:850
Units: 4.0 CEU (40 hours of instruction)
Fee:
Through Feb 22: $3,775 | After: $4,195
10995 Le Conte Avenue, Suite 315, Los Angeles, CA 90024-1333
TMP is one of the most invigorating leadership training programs in the world. In just 5 days,
this program develops managers into strong leaders. Tailored for engineers, IT professionals,
and other managers working in technical fields, TMP presents a blend of technical and managerial information to improve personal and organizational performance. Discover new ways
to solve problems, plan strategies, and motivate colleagues. When you take TMP, you’re
inspired to succeed. Please visit uclaextension.edu/tmp.
Engineering & Technology
Short Courses
Spring 2015