Data Center Interconnect Solutions for Large Enterprises

Transcription

Data Center Interconnect Solutions for Large Enterprises
DATA CENTER
INTERCONNECT
SOLUTIONS FOR
LARGE ENTERPRISES
MEETING CURRENT AND FUTURE NEEDS FOR
ENTERPRISE DATA CENTER INTERCONNECT
STRATEGIC WHITE PAPER
The rapid gains in data center efficiency, the emergence of mega data centers and
the impact of cloud computing, as well as the virtualization of data center architecture
and Software-Defined Networking (SDN) mean that large enterprises need to consider
new approaches to meet current and future data center interconnect (DCI) needs.
Alcatel-Lucent provides a wide choice of DCI solutions that help large enterprises
de-risk the provisioning of data center interconnect. These include high performance,
low latency, secure optical WDM solutions for synchronous applications to IP/MPLS
solutions that provide high performance, multi-site DCI with advanced QoS and traffic
engineering for asynchronous applications. Alcatel-Lucent DCI solutions are used by
many large enterprises in the financial, healthcare, consumer and industrial segments
for business and mission-critical applications.
Alcatel-Lucent is also at the forefront of data center network virtualization with
SDN solutions that deliver unrestricted data center networking while enabling SDN
extension across the WAN — greatly simplifying operations, reducing costs and
increasing agility.
TABLE OF CONTENTS
Introduction
/
1
Overview of market trends
/
1
Optimal technologies for DCI
/
2
Data center connect solutions
/
3
Optical data center interconnect / 3
Layer 1 encryption for secure DCI / 4
Ethernet transport for DCI / 5
Ethernet and IP VPNs for DCI / 6
Virtualization, SDN and DCI / 8
Summary
Acronyms
/
/
10
10
INTRODUCTION
Synchronous applications, such as real-time disaster recovery and business continuity
between data centers continue to drive the enterprise data center interconnect (DCI)
market. For large enterprises with the highest performance, regulatory and security
requirements, the preferred choice is a WDM optical solution. This approach continues
to be a valid option where security and integrity of business- and mission-critical data
remains central to the company’s business and operations.
But other solutions are becoming available as DCI is being completely redefined. This
comes as a result of rapid gains in data center efficiency, the emergence of mega data
centers and the impact of cloud computing, software-defined networking (SDN) and the
virtualization of data center architecture. Although these factors mainly impact service
providers and telecom operators, emerging technologies in the cloud era mean that large
enterprises must consider new approaches to meet future DCI needs.
DCI is expanding beyond the business continuity and disaster recovery role it has
traditionally played. It is becoming a way to connect data centers in a cloud of virtualized
compute and storage using SDN to automatically allocate resources, as required. The key
question for large enterprises used to be: “How can I maximize the bandwidth between
sites at the lowest latency and cost?” Given the rapid and dramatic market changes,
the key question now is: “How can I meet my current DCI needs with a solution that
encompasses virtualization, SDN and the cloud as well?”
OVERVIEW OF MARKET TRENDS
Enterprise market trends, such as increased employee mobility, the adoption of “bring
your own device”, “bring your own application” and the “big data” explosion are
impacting future needs and requirements for enterprise data centers and DCI.
According to IDC, key growth areas
for DCI will be dynamic workload
scheduling and asynchronous
data replication, particularly for
The enterprise data center market is also being affected by cloud computing, big data
and the compelling economics of virtualization. As a result, it is undergoing a period of
rapid change, growth and consolidation. According to IDC,1 the key business drivers for
enterprise DCI vary by enterprise segment. However, the most common drivers include
more efficient IT resource utilization (financial services), improved end-user access
to applications (government and education) and simplified data center management
(industrial and consumer).
IDC found that the most common applications for enterprise DCI continue to be near
real-time disaster recovery and business continuity. Future growth areas for enterprise
DCI will be dynamic workload scheduling and asynchronous data replication, particularly
for cloud-based applications. In addition, large enterprises need an approach that can
scale to meet future needs, respond to competitive pressures, and adapt to data center
virtualization, SDN and the cloud.
The changing dynamics of the data center business are also having a knock-on effect
on enterprise data centers in terms of size and efficiency, future expansion and scale, as
well as server virtualization and cloud services. Server virtualization and cloud services
have been adopted successfully during the past few years by Internet companies, such as
Amazon and Google. This so-called web-scale approach uses a virtualized, cloud-based
architecture built on commodity compute, storage and network components. Combined
1 “Highlights of IDC's 2013 Datacenter Interconnect Survey of Enterprise Datacenter Respondents”, IDC, February 2014
DCI Solutions for Large Enterprises
ALCATEL-LUCENT STRATEGIC WHITE PAPER
1
cloud-based data centers and
applications.
with SDN, it enables capacity to be increased and decreased as needed by rapidly and
automatically assigning and de-assigning resources. Gartner predicts that by 2017 more
than 50 percent of large enterprises running their own data centers will adopt the webscale approach to IT because of the flexibility, agility, efficiency and cost savings offered
by this approach.2 This will have a dramatic impact on large enterprises’ future data
center architecture and operations, as well as future DCI requirements.3
A report by Gartner predicts
that by 2017 over 50% of large
enterprises are expected to adopt
the web-scale approach to IT that
Internet companies have adopted2.
OPTIMAL TECHNOLOGIES FOR DCI
Different networking technologies are available to address different DCI networking
challenges while supporting applications with different performance and latency
requirements. The following factors need to be considered:
• The type of applications, and whether they are synchronous or asynchronous, which
will have some influence on the choice of technology and its implementation.
• Overall bandwidth requirements and the distance between data centers, which could
mean a trade-off between speed and cost.
• Latency requirements for mission-critical applications, which usually dictates the
fastest and most efficient technology for those applications that demand the lowest
latency.
• The types of client interfaces (both computing and storage), which when other factors
are taken into consideration, may limit the choice of solution.
Table 1 shows the optimal Alcatel-Lucent solution and networking technology to support
the requirements of different DCI applications. The applications are organized into tiers
with Tier 1 applications requiring a DCI solution with the highest performance and
lowest latency. Tiers are then mapped to networking technologies that can meet the
underlying requirements of the application. In the following sections, the solutions are
discussed in more detail.
Table 1. Optimal networking technology to support different enterprise DCI applications
ENTERPRISE
DCI APP
APPLICATION PERFORMANCE
REQUIREMENTS
TYPICAL
APPLICATIONS
ALCATEL-LUCENT
SOLUTION
Tier 1
• < 5 milliseconds latency
• Synchronous applications
• < 50 milliseconds restoration
• Metro (<50 km) or regional (<150 km)
Optical WDM using the Alcatel-Lucent
1830 PSS:
• < 10 Gbps bandwidth (CWDM)
• Business continuity and disaster recovery
• ≤ 200 Gbps (DWDM)
• Federated storage – data collaboration
and migration (metro/regional)
• > 50 ports (Fibre Channel,
FICON and InfiniBand
transport)
Tier 2
• < 50 milliseconds latency
• < 50 milliseconds restoration
• Content delivery and video caching
synchronization
• Asynchronous and synchronous
applications (depending on distance)
• > 20 and < 100 Gbps
bandwidth
• Metro, regional, national >150 km
• > 20 ports (Fibre Channel and
Ethernet)
• Tape vaulting
• Business continuity and disaster recovery
• Short reach CWDM
< 50 km
< 10 Gbps
• Short reach DWDM
< 150 km
≤ 200 Gbps
Optical WDM (medium or long reach
DWDM) or Layer 2 Carrier Ethernet
transport using the Alcatel-Lucent
1830 PSS
• Bandwidth aggregation (data center
consolidation)
• Federated storage – data collaboration
and migration (regional/national)
2 “Strategic Technology Trend: Web-Scale Singularity Means Goodbye to Conventional IT Wisdom”, Gartner, February 2014
3More details of these market trends and the impact of these trends on the large enterprise DCI market are discussed in the Alcatel-Lucent
white paper, Data Center Interconnect Market Trends and Requirements.
DCI Solutions for Large Enterprises
ALCATEL-LUCENT STRATEGIC WHITE PAPER
2
ENTERPRISE
DCI APP
Tier 3
APPLICATION PERFORMANCE
REQUIREMENTS
TYPICAL
APPLICATIONS
ALCATEL-LUCENT
SOLUTION
• < 50 milliseconds latency
• < 50 milliseconds restoration
• Asynchronous and synchronous
applications (depending on distance)
• < 20 Gbps bandwidth
• Metro, regional or national
Layer 2 Ethernet transport using the
Alcatel-Lucent 1830 PSS Carrier Ethernet
capabilities
• < 20 ports (Ethernet)
• Server-based replication
• NAS and remote tape backup
• Remote office access and backup
Tier 4
• < 100 milliseconds latency
• Asynchronous applications
• < 100 milliseconds
restoration
• Metro, regional, national or global
• < 10 Gbps bandwidth
• Remote location access and backup
• < 10 ports (Ethernet)
• Integration with private WANs
• NAS and remote tape backup
• Extending DC virtualization and SDN
over the WAN
• Layer 2 Ethernet, Layer 3 IP VPNs or
Business Internet Access using the
Alcatel-Lucent 7750 SR
• Extend DC virtualization and SDN over
the WAN using the 7750 SR as a DC
gateway
DATA CENTER CONNECT SOLUTIONS
Optical data center interconnect
Optical WDM is the technology of choice for Tier 1 and Tier 2 DCI applications and offers
transport-grade reliability and protocol-independence to meet most DCI requirements. It
is the only technology that enables full network flexibility and adaptability at speeds of
10, 40 and 100 Gbps and beyond while meeting the stringent performance, latency and
reliability demands of synchronous DCI applications.
BENEFITS OF THE
1830 PSS FOR DCI
Figure 1 shows the Alcatel-Lucent 1830 Photonic Service Switch (PSS) used for optical
DCI. The 1830 PSS was the first DWDM platform to enable 100G and the first to
support 200G coherent optical transport on a single-carrier wavelength. Using internally
developed silicon, the 400 Gbps capacity Photonic Service Engine (PSE), and technology
from Alcatel-Lucent Bell Labs, the company created the 1830 PSS — a scalable, nextgeneration DWDM platform that supports multiprotocol data center aggregation for
Ethernet, Fibre Channel (FC) and InfiniBand®. It supports both short reach CWDM and
medium/long reach DWDM optical interfaces depending on requirements and distance
between data centers.
• Protocol independence
Backup data center
LAN
Server farm/
NAS server
Ethernet
LAN
Storage array
Fiber
channel
LAN
1830 PSS
SAN
SAN
1830 PSS
WDM optical
network
1830 PSS
10, 40, 100 and 200 Gb/s WDM links
HPC
Mainframe
HPC
InfiniBand
HPC
The 1830 PSS supports efficient wavelength switching between source and destination
using Tunable-Reconfigurable Optical Add-Drop Multiplexing (T-ROADM). For larger
enterprises with more complex requirements, the 1830 PSS supports full Layer 2 Ethernet
DCI Solutions for Large Enterprises
ALCATEL-LUCENT STRATEGIC WHITE PAPER
3
• Scalable bandwidth
• Low latency with latency
optimization
• Lossless transport
• High utilization with flexibility
1830 PSS DCI
CERTIFICATIONS
• Approved WDM product
for IBM GDPS transport
Figure 1. Optical data center interconnect using the Alcatel-Lucent 1830 PSS
Main data center
• Support for virtual apps
and content
• Brocade certification
• EMC certification including
VPLEX for continuous storage
availability
• Tested with HP 3PAR Peer
Persistence
• (FIPS) 140-2 Security Level 2
(SL2)
services over the optical network, and a Generalized Multiprotocol Label Switching
(G-MPLS) control plane to enable automated set-up, provisioning, and restoration
of the optical layer, decreasing costs and increasing uptime.
Wavelength Tracker is a multilayer network planning and control tool for the 1830 PSS
that provides an integrated view of the optical network, making it easier to monitor
performance, identify problem areas and reduce configuration errors. Wavelength
Tracker automates provisioning of power levels and cross-connections, and automates
and optimizes the commissioning of wavelengths. It supports sophisticated wavelength
fault isolation with reporting of threshold alarms and detection of wavelength collisions
and cable misconnections, eliminating many configuration errors and significantly
reducing operating costs.
BENEFITS OF SECURE DCI
• Support for dynamic and virtual
apps
• AES 256 bit hardware encryption
• Low latency adds <20 nanoseconds
• Optical intrusion detection
• Protocol independence
• Scalable to meet future demand
• Cost-effective
The 1830 PSS also supports latency optimization on its optical line cards to ensure
synchronous DCI applications can be optimized depending on the distance between sites.
On-demand latency measurement with hardware time-stamping can be used to check
end-to-end round trip delay at network commissioning or after activating features such
as line protection.
Layer 1 encryption for secure DCI
Today’s data centers are continuously at risk from internal and external security threats.
More than simply deploying antivirus and firewall defenses, large enterprises must
establish comprehensive IT security programs that protect a virtual and distributed
environment of computing and storage resources.
For these distributed resources to work effectively and meet diverse end-user
requirements, applications require secure, low-latency, real-time communications with
guaranteed QoS. The infrastructure and optical fibers used for DCI transport are key
components of a holistic and systematic IT security program.
Encryption is the algorithmic process that transforms data into unreadable crypto text.
Real-time, on-the-fly transformation is the only option for cost-effectively meeting enduser needs in an always-on world. Level 1 encryption is the preferred method for DCI,
supporting higher-layer data flow across metro or long-haul optical DWDM transport.
Figure 2 shows how Level 1 encryption maximizes capacity and performance for DCI
over secure optical DWDM links.
Figure 2. Secure data center interconnect using the Alcatel-Lucent 1830 PSS
Main data center
Backup data center
Key management tool
Ethernet
LAN
• Private optical solution with two
separate fully redundant networks
managed by NOC
SAN
• High security using AES encryption
managed by bank cyber security
team
LAN
Server farm/
NAS server
Storage array
Fiber
channel
LAN
SAN
1830 PSS
WDM optical
network
1830 PSS
• Very low latency for synchronous
DCI
• RTT< 194-770us <1ms
Secure, encrypted 10 Gb/s WDM links
HPC
Mainframe
InfiniBand
HPC
DCI Solutions for Large Enterprises
ALCATEL-LUCENT STRATEGIC WHITE PAPER
4
CASE STUDY: SECURE
OPTICAL DCI FOR A
EUROPEAN BANK
HPC
The Alcatel-Lucent 1830 PSS supports an integrated Layer 1 hardware encryption option
combined with optical intrusion detection to provide secure transport for critical DCI
applications. The platform uses Advanced Encryption Standard (AES) with 256 bit
hardware encryption that adds less than 20 nanoseconds of latency. A separate, secure
and scalable key management tool manages the encryption keys independently of the
1830 PSS management system. This enables security management to be completely
separated from optical management, allowing two different organizations to jointly
manage the overall solution without compromising data confidentiality and security.
For example, a bank cyber security team can manage the key management and
encryption with a service provider managing the optical network.
The Alcatel-Lucent 1830 PSS can manage specific physical and logical security
risks regarding individual network elements, including secure device configuration,
comprehensive logs with intrusion prevention alarms, highly flexible optical interface
redundancy options, and an optical intrusion detection feature that continuously monitors
links for unexpected loss of signal strength from unauthorized optical fiber taping.
Layer 2 Ethernet transport over optical WDM can be used to provide transparent, pointto-point Ethernet Line (E-Line) and multi-point Ethernet LAN (E-LAN) and Ethernet
Tree (E-Tree) connections for most asynchronous and some synchronous applications
depending on latency tolerance and distance between data centers. Typical applications
include backup and recovery of Ethernet-attached server farms and for network attached
storage (NAS).
Figure 3 shows Layer 2 Ethernet transport over optical WDM using the 1830 PSS, which
supports a range of optical interfaces, including DWDM, CWDM, 100 Gbps and 200 Gbps
Ethernet. Large enterprises already using optical WDM on the 1830 PSS for synchronous
DCI applications can simply add Ethernet transport capabilities with QoS, OAM and
protection. This approach can provide significant cost savings when connecting multiple
sites by using E-LAN or E-Tree for aggregation and statistical multiplexing of services.
Figure 3. Ethernet transport for data center interconnect using the Alcatel-Lucent 1830 PSS
Corporate HQ
Regional site
WDM optical network
with L2 Ethernet Transport
Primary
data center
IP/MPLS network
7750 SR
7750 SR
1830 PSS
Secondary
data center
Remote
data center
The Carrier Ethernet transport implemented in the 1830 PSS uses the same Alcatel-Lucent
Service Router Operating System (SR-OS) software used in the Alcatel-Lucent 7750
Service Router (SR) and 7450 Ethernet Service Switch (ESS). It is fully compliant with
and certified to Metro Ethernet Forum (MEF) Carrier Ethernet 2.0 (CE 2.0) for E-Line,
DCI Solutions for Large Enterprises
ALCATEL-LUCENT STRATEGIC WHITE PAPER
5
• Cost-effective option for 1830
PSS in multi-site applications
• Support for E-Line, E-Tree and
E-LAN
• Fully compliant with MEF 2.0
Ethernet transport for DCI
L1 encryption
BENEFITS OF
ETHERNET FOR DCI
• Ethernet functions based on
Alcatel-Lucent SR-OS
• Fully compatible and common
management with the AlcatelLucent IP/MPLS portfolio
E-LAN and E-Tree services and fully interoperable with the 7750 SR. It also uses the
Alcatel-Lucent 5620 Service Aware Manager (SAM) system as the 7750 SR and 7450 ESS
for end-to-end provisioning, trouble-shooting and maintenance. This enables operational
savings when using Alcatel-Lucent optical and IP/MPLS solutions in the same network.
Ethernet and IP VPNs for DCI
Layer 2 Ethernet and Layer 3 IP VPNs are the technologies of choice for asynchronous
data center applications that have less stringent latency, lower bandwidth and regional,
national or international connectivity requirements. They are also the preferred choice
for large enterprises with additional requirements, such as remote site access to
applications hosted in the data center, application performance monitoring or
integration with the private WAN.
BENEFITS OF L2 AND L3
VPNS FOR DCI
• High performance and scalability
• Supports wide range of MEF 2.0
Ethernet and IP VPNs
• Comprehensive high availability
and reliability
• DDoS and Application Assurance
Figure 4 shows Layer 2 Ethernet and Layer 3 IP VPNs implemented in the Alcatel-Lucent
IP/MPLS product portfolio that includes the 7750 SR and the 7450 ESS. The 7750 SR is
a high-performance, multiservice router designed for the concurrent delivery of advanced
IP/MPLS-based services on a common platform, and the 7450 ESS is a Carrier Ethernet
switch router designed to deliver high-performance MPLS-enabled carrier Ethernet
services. The products support a wide range of LAN and WAN interfaces, including
1 Gbps Ethernet, 10Gbps Ethernet, 100G bps Ethernet, ATM and SONET/SDH.
• Integrates easily with existing
enterprise WAN infrastructure
Figure 4. Ethernet and IP VPNs for DCI using the Alcatel-Lucent 7750 SR
Application assurance
CASE STUDY: BUSINESS
CRITICAL NETWORK FOR
EUROPEAN BANK
Traditional
data center
7210 SAS
• End-to-end managed national
WAN and regional MAN
SDN-based
data center
• Converged IP/Optical solution
covering 8 data centers and
8000 branches
L2 Ethernet (VPLS)
or L3 IP VPN (MPLS)
Enterprise
branch routers
7750 SR
7450 ESS
7210 SAS
Enterprise
network
External
threat
mitigation
WDM optical network
Cloud-based
data center
DDoS
5620 SAM for integrated
IP/optical management,
control and assurance
1830 PSS
1830 PSS
Designed for service provider networks and using the Alcatel-Lucent 400 Gbps FP3
silicon technology, the products deliver exceptional performance and scale for large
enterprise networks to support a wide range of IP and Ethernet services. Service
intelligence enables granular control of services and drives operational efficiency.
Available in different chassis variants, the products support a wide range of IP/
MPLS-based VPN services, such as Layer 2 Virtual Private LAN Service (VPLS), MEF
2.0-certified E-LAN, E-Line, E-Tree and E-Access and Layer 3 IP VPNs, IPv6 VPNs and
multicast VPNs. The products use the Alcatel-Lucent Service Router Operating System
(SR OS) and are managed by the Alcatel-Lucent 5620 Service Aware Manager (SAM)
for end-to-end provisioning, troubleshooting and maintenance.
DCI Solutions for Large Enterprises
ALCATEL-LUCENT STRATEGIC WHITE PAPER
6
• Carrier grade quality and SLAs
• Highly responsive, supporting
network changes in minutes at
incremental marginal cost
High availability and reliability features for DCI applications
The Alcatel-Lucent 7750 SR supports highly scalable IP VPN services with unmatched
performance, security and reliability for DCI applications. Redundant hardware, non-stop
routing and non-stop forwarding ensure end-to-end IP VPN services are not interrupted
by link failures, equipment failures, DDoS attacks and software upgrades. Link, nodal and
path protection capabilities ensure highly available services and protect against service
interruptions, using features such as:
• Multi-Chassis - Link Aggregation Group (MC-LAG), Automatic Protection Switching,
Resilient Ring and Multilink PPP (MC-MLPPP)
• Primary and standby LSPs, MPLS Fast Reroute
• Bidirectional Forwarding Detection
• Pseudo wire dual homing and pseudo wire stitching
• MAC topology change notification and flush notification
Security capabilities across different layers include DDoS attack prevention; line-rate
filtering; service mirroring; administration, routing and control authentication; logging,
reporting and auditing; network traffic control; network topology analysis; Layer 2 and
Layer 3 resource control on per-customer, per-service, per-port, per-module and perplatform bases; Layers 2 to 7 monitoring and application control.
Integrated IP/optical with common management and service assurance
The Alcatel-Lucent 7750 SR, combined with the Alcatel-Lucent 1830 PSS, provides a
cost-effective, more efficient integrated IP/optical solution for DCI with multiple reliability
and high availability features in support of business and mission-critical DCI applications,
such as business continuity and disaster recovery. Fully redundant platforms with disaster
recovery technologies at the IP routing and optical transport layers provide node level,
network level and application level protection.
The 5620 SAM leverages multi-domain, multi-layer management to provide common
management across both the IP and optical domains to unify workflows and achieve
maximum efficiency. Proactive assurance and advanced monitoring capabilities across
elements, infrastructure layers, and services in the integrated IP/optical network rapidly
detect and isolate problems before they can impact services and end users. Integrated
views across multi-domain and multi-technology layers spanning physical, routing, MPLS
and IP/optical service topologies simplify and accelerate troubleshooting. End-to-end power
control, monitoring, tracing and fault localization for individual wavelength channels
— enabled through the Alcatel-Lucent Wavelength Tracker technology — proactively
prevent service degradation by enabling delivery of true optical SLAs. Integrated IP/optical
performance and SLA monitoring using comprehensive service-aware diagnostics validate
end-to-end data services and IP/optical paths. Fast and easy configuration and multivendor scripting workflows reduce the risk of errors and speed network deployment time.
Application assurance and DCI
Two common challenges facing large enterprises are how to address performance for
applications hosted in the data center and how to track application usage and bandwidth
to/from the data center. Alcatel-Lucent IP/MPLS solutions meet these challenges using
Application Assurance, which provides extensive application monitoring and reporting.
These include:
• Hosted or cloud application performance monitoring (client to host) with granularity
across multiple network segments.
DCI Solutions for Large Enterprises
ALCATEL-LUCENT STRATEGIC WHITE PAPER
7
INTEGRATED
IP/OPTICAL FOR DCI
• Secure connections at the
optical layer
• Leverage IP/MPLS L2/L3 VPNs
to connect multiple data centers
• Meet growth with 100Gbps
connections
• Smooth upgrade to 400Gbps
connections
• High service quality, low latency
• Leverage SDN to distribute
resources, extend virtualization
and automation
• Bandwidth utilization in the data center or between any two sites on a per-application,
application group or user group basis.
• Application statistics, including top bandwidth applications and top users per
application
• Centralized repositories for application data collection that scale for large enterprise
networks and provide the business intelligence for new service development.
• Enterprise AA Portal for visibility into both enterprise and hosted applications running
over the WAN.
Application policies can be enforced across multiple touch points, including the data
center, and at any point in the network. This distributed, network-based application
assurance capability can also provide SLA measurement for business critical applications
hosted in the data center — right down to the remote sites and users accessing the
application. SLA guarantees can be provided for users while enabling performance
monitoring of applications as they transit the network.
Virtualization, SDN and DCI
Alcatel-Lucent has leveraged SDN and its global expertise in IP networking to create the
Nuage Networks Virtualized Services Platform (VSP). The Nuage Networks VSP enables
large enterprises to build robust and highly scalable networking infrastructures within
and between data centers. These new infrastructures deliver secure virtual slices of
readily consumable compute, storage and networking resources to different user groups.
The Nuage Networks VSP is specifically designed to:
• Simplify operations for rapid service instantiation – Nuage Networks VSP defines
network service requirements in clear, IT-friendly language. It also uses automated,
policy-based instantiation of network connectivity to bring up services. This
dramatically reduces time to service and limits potential for errors.
• Address changing business requirements with flexible, adaptable services – The
data center has to adapt dynamically to keep up with evolving application needs.
The Nuage Networks VSP detects newly created and updated virtual machines and
responds automatically by adapting network services, according to established policies.
• Support massive scale and hybrid models – The Nuage Networks VSP seamlessly
connects data centers and hybrid clouds with existing Layer 2 Ethernet or Layer 3
IP VPNs. Its distributed policy-based approach separates compute and networking
technologies to allow multiple virtualization platforms to interoperate over a single
network and optimizes the data center network by separating service definition from
service instantiation.
Alcatel-Lucent has implemented data center virtualization technologies, such as network
virtualization overlay (NVO) and virtual extensible LAN (VXLAN) in the Nuage Networks
VSP and the 7750 SR. VXLAN is the de-facto overlay data plane standard for data center
networking. It encapsulates Ethernet in IP, can be routed by IP and can be terminated
on computer infrastructure or network equipment. The underlay network may be any IP
network that uses existing routing, resiliency and load balancing mechanisms. Overlays
can be viewed as a tunnel between two end points within the data center. They provide a
number of benefits, including VPNs for multi-tenancy, network virtualization for location
independence of resources within the data center, improved resource allocation and
protection from topology or technology changes.
DCI Solutions for Large Enterprises
ALCATEL-LUCENT STRATEGIC WHITE PAPER
8
CASE STUDY: NUAGE SDN
DEPLOYED IN A LARGE
US BANK
• 50% reduction in operational
expenses
• 10x improvement in turn-up
response time with a reduction
in configuration errors
• 40% increase in asset utilization
and flexibility
Figure 5. Open programmable, automated and seamless DCI and cloud using Nuage Networks and the
Alcatel-Lucent 7750 SR
Nuage Networks
Virtual Services
Platform (VSP)
SDN-based
data centers
VPN
Data center
gateway
7750 SR
5620 SAM
Enterprise
network
WDM optical network
1830 PSS
1830 PSS
Remote sites
Alcatel-Lucent has combined NVO and VXLAN with emerging technologies, such as
Ethernet VPN (EVPN) in the SR-OS software to enable a data center gateway function on
the 7750 SR, as shown in Figure 6. EVPN provides an overlay control plane and is based
on well-established MPLS and BGP routing protocols and operational experience used in
service provider networks. It also includes some improvements over existing techniques,
such as Virtual Private LAN Service (VPLS) used to deliver Ethernet LAN services over
MPLS. When combined with VXLAN as the overlay data plane, E-VPN enables data
center virtualization to be extended across the WAN between multiple data centers.
The data center gateway capabilities enable the 7750 SR to connect virtualized, cloudbased data centers over the WAN. By using these capabilities with the Ethernet and
IP VPN capabilities of the 7750 SR, large enterprises can simultaneously and securely
connect multiple virtualized, cloud-based data centers with remote sites in the private
enterprise WAN, as well as with Internet-connected sites and the outside world. As a
result, cloud bursting and hybrid cloud services are made possible in a highly dynamic
and robust manner that is an extension of the existing enterprise wide area data services.
These solutions build on expertise that Alcatel-Lucent has learned from:
• Building very large IP/MPLS networks – In scaling IP networks, intelligence is pushed
to the network edges. This same approach is used to enable a simple and cost-effective
core datacenter network, consistent with the manner in which IP technologies have
successfully scaled to date. The approach decouples network services from the
infrastructure and enables parallel innovation in each domain.
• Designing mobile networks that have been optimized for massive subscriber scale –
This yields a policy-driven auto-instantiation model for the datacenter network that
minimizes costs and delays. The new model significantly increases the efficiency of
delivering cloud services.
• Abstracting network capabilities into IT and business logic terminology – Applying
the first two design principles fully virtualizes and automates any datacenter network
infrastructure, transforming it into a reflexive environment that instantaneously
establishes the network services required to deliver policy-driven cloud applications.
DCI Solutions for Large Enterprises
ALCATEL-LUCENT STRATEGIC WHITE PAPER
9
Using SDN to optimize the datacenter network enables it to be open and programmable.
Network services within and between data centers are defined from an abstraction of
network resources, and implementation remains independent of the underlying server
or compute virtualization environment and data center network hardware.
ACRONYMS
CE
Carrier Ethernet
DCI
Data Center Interconnect
DDoSDistributed Denial of Service
Built from the ground up for the IT world of development and operations, the
Alcatel-Lucent solution frees large enterprises to migrate to the most efficient models
of application delivery without any compromise in security or compliance. A rich
policy-based framework allows fine-grain control of access mechanisms that directly
match the existing security and operational models of large enterprises, and scales to
meet the future needs of large enterprise data center environments.
DWDMDense Wave Division
Multiplexing
EVPNEthernet virtual private
network
HPCHigh-performance computing
LAN
Local Area Network
NASNetwork Attached Storage
SUMMARY
NVO
Network Virtual Overlay
MEF
Metro Ethernet Forum
Large enterprises need to consider new approaches to meet current and future DCI
needs because of market trends such as the rapid gains in data center efficiency,
the emergence of mega data centers, the impact of cloud computing, the virtualization
of data center architecture and software-defined networking.
MPLSMulti-Protocol Label
Alcatel-Lucent DCI solutions help large enterprises de-risk the provisioning of data
center interconnect and include high performance, low latency, secure optical WDM
solutions for synchronous applications, as well as IP/MPLS solutions that provide
high performance, multi-site data center interconnect with advanced QoS and traffic
engineering for asynchronous applications. Alcatel-Lucent data center network
virtualization and software-defined networking solutions deliver unrestricted data
center networking within the data center and across the WAN to greatly simplify
operations, reduce costs and increase agility.
For more information about Alcatel-Lucent products and solutions for DCI,
please see:
www.alcatel-lucent.com/products#data-center
www.alcatel-lucent.com/solutions/data-center-connect
www.alcatel-lucent.com Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of
Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented
is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright © 2014 Alcatel-Lucent. All rights reserved. PTR2014107803EN (October)
Switching
QoS
Quality of Service
SAN
Storage Area Network
SDNSoftware-Defined
Networking
T-ROADMTunable-Reconfigurable
Optical Add-Drop
Multiplexing
VPLSVirtual Private LAN Service
VPN
Virtual Private Network
VSPVirtualized Services Platform
VXLAN
Virtual Extensible LAN
WDMWave Division Multiplexing