ERCOTOverview_AMSDataProcesses

Transcription

ERCOTOverview_AMSDataProcesses
AMS Data Workshop
ERCOT Overview of AMS Data Processes
June 27, 2014
ERCOT
June 27, 2014
1
Focal Points
• AMS data: loading to settlement
• Estimation Process for ESI IDs with AMS meters
• Reports / Extracts applicable to AMS data
• ERCOT functions that use AMS data
2
Basic “do’s and don’ts”
• ERCOT Do’s:
– Receive AMS data from TDSPs in “LSE files”
– Apply appropriate validations to the LSE files
– Load AMS data into the settlement system, thereby making it
available for ERCOT processes
– Publish AMS data
– Monitor/report on AMS data submission status
• ERCOT Don’ts:
– Change TDSP submitted AMS data
– Perform VEE on AMS data
– Provide premise level usage data to entities other than the
TDSP or the REP of Record
3
AMS Data: Loading to Settlement
• Please see posted materials
“ERCOTOverview_AMSDataProcesses_Usage&SettlementTimeline.xlsx”
• Simple illustrative example:
– AMS data activities relative to ERCOT RTM Settlement
Timeline for an Operating Day
4
AMS Data Loading – Key Points
• Data loaded hourly throughout the day (Sun-Sat)
• Timing and batching of data varies between TDSPs
• Validations can result in rejection at the file level or the ESI
ID/Operating Day level
• Usage loading is placed on hold from 4p until completion of
the data aggregation process that evening
• As a general rule, data received by ERCOT by 3:00 pm is
available for use in settlement as early as that night
5
ERCOT AMS Data Estimation – Key Points
• ERCOT ONLY estimates usage for ESI IDs with AMS
meters if NO data was received from the TDSP for that
ESI ID for the Operating Day being settled
– “No data” means… no interval data available in
ERCOT’s settlement system as of the time of executing
Data Aggregation.
– ERCOT will have all of it or none of it for an Operating
Day - partial interval data for a day is NOT a possibility.
6
General Rules for AMS & IDR Meter Data Estimation
• Estimation process is the same for AMS & IDR Meters
• Estimation performed at ESI ID level (not aggregate)
• Meters are classified as weather sensitive (WS) or
non-weather sensitive (NWS)
– All AMS meters are WS
– IDR meters may be WS or NWS
• WS use 1 of 3 WS proxy days if available, else use
NWS method
• NWS use most recent, same day of week for estimate
• If no data within 12 months of Operating Day, backcast
profile used
• Special rules apply when transitioning from NIDR
7
WS Meter Data Estimation
• Eligible days are created for each weather zone
using the criteria below:
– Target day must be same season &
weekday/weekend day type as operating date
– Target day must be within 365 days of operating date
– Target day max temp must be within 5 degrees of
operating date max temp
– Target day max temp hour must be within two hours
of operating date max temp hour
• Eligible days are ranked as per Protocol 11.4.3.2 and
top three are retained as WS proxy days
• ESI ID is then estimated with highest ranked proxy
day
• If no WS proxy day data available, ESI ID will be
estimated as per NWS ESI ID
8
NWS Meter Data Estimation
• For each ESI ID, the most recent occurrence of
the appropriate day of the week corresponding
to the day of the week of the operating day will
be used as an estimate provided it is within 12
months of the operating date
• If no data is available per above, backcast profile
will be used
• Special Rule – Transition from NIDR
– If no data available per above, backcast profile will be
scaled as per NIDR estimation if ESI ID was profiled
as NIDR within 90 days of operating date and an
NIDR meter read exists within 12 months of the
operating date
• Holidays are treated as Sundays
9
Backcast Profile Review
• Backcast profiles are created for each ProfileType &
WeatherZone combination
• ProfileType Examples (31 Total)
– BUSHIDG, BUSHILF, BUSIDRRQ, NMFLAT,
NMLIGHT, RESHIPV, RESLOWR
• WeatherZones (8 Total)
– COAST, EAST, FWEST, NCENT, NORTH, SCENT,
SOUTH, WEST
• Backcast Profile Examples (248 Total)
– BUSHIDG_COAST, BUSHILF_EAST,
NMFLAT_FWEST, RESHIPV_NCENT,
RESLOWR_NORTH
10
ERCOT Reports & Extracts for AMS
Processing Reports for TDSPs:
• Missing Consumption Report
– Includes ESI IDs for NIDR, IDR & AMS
• AMS LSE file based reports
– Interval Data LSE Activity Report
– AMS Missing Report
– AMS Interval Threshold Report
Data Extracts:
• Supplemental AMS Interval Data Extract
– MP must schedule to receive
Market Data Transparency Retail User Guides: http://www.ercot.com/services/mdt/userguides/index
11
Missing Consumption Report
• Identifies ESIIDs (IDR/NIDR/AMS) for which ERCOT
has not received consumption data for thirty-eight
(38) days ago.
• Posts to MIS (Certified area)
• Report is generated daily and is delivered to any MRE
with data missing 38 days ago
• Supports protocols NP10.3.3.3.1, NP11.2.2(3)(c)
12
Interval Data LSE Activity Report
• Responses to ERCOT data loading attempt for AMS
interval data transactions into the Lodestar Database
• Includes both errors and successful loading
responses
• Posts to MIS (Certified area)
• Reports are generated as files are submitted
• Supports protocols NP11.2.2(3)(b), NP11.2.2(3)(a),
NP10.12.3(b)
13
AMS Missing Report
• Informs TDSPs of AMS interval data missing 40-57 days
past the operating date, by ESI ID
• Encourages AMS data submission for operating dates
still missing in preparation of final settlement
• Provides information on operating dates, by ESI ID,
where data is still missing after final settlements
– Data aggregation runs on day 53 after the operating day for final
settlements
• Report is generated twice weekly and delivered to TDSP
via email
• This report is not required by protocol
14
Supplemental AMS Interval Data Extract
• MP must request this extract before it will be
generated
• Serves to help ensure that ERCOT systems are
in synch with Market Participant systems
• Provides MP with AMS interval usage data for all
ESIIDs owned by a MP three days after the data
is loaded in ERCOT systems
– If data is not loaded for a given day for a MP, there
would be no extract for the MP
• Recipients of this extract include TDSP and LSE that
is the Rep of Record on an ESIID
15
AMS Data Threshold Checks – 1% Total Energy
•
Catalyst – Proactively identify potential AMS data issues prior to running
initial settlements to prevent RTM Resettlements
•
SAS program initiated automatically at approx. 8:00 am every morning
•
Looks back four days
– Example - June 27, 2014 – program looks at data loaded in ERCOT
systems for June 23rd – 26th at the time the report is run
•
Identify any ESI ID where data exceeds 1.25 MWH/5 MW in an interval
•
Sums total usage for identified ESI IDs for a given operating day
•
Compares total usage, by Operating Day, for identified ESI IDs to total
ERCOT load for the same Operating Day
•
If, for the identified Operating Day, the total AMS usage for these ESI IDs
exceeds 1% of the total ERCOT load:
– Generate report with identified ESI IDs
– Create MarkeTrak issue and reach out to the TDSP to inform them of the
MT issue and request investigation and data corrections as needed, prior to
initial settlements
16
AMS Data Threshold Checks – High Threshold Check
•
Catalyst – Proactively identify potential AMS data issues prior to running
final settlements to enhance the accuracy of market settlements
•
SAS program initiated manually approximately 8 days into a month
•
Looks back at the prior month
– Example - June report looks at data loaded for May as of that point in time
•
Identify any ESI ID where data for any interval exceeds defined threshold
for RES and BUS profile types
– RES profile type threshold set at 62.5 kWh/250 kW in an interval
– BUS profile type threshold set at 250 kWh/1 MW in an interval
•
If, for the identified Operating Days, AMS interval usage for these ESI IDs
exceeds the defined threshold:
– Generate report with identified ESI IDs
– Create MarkeTrak issue to inform the TDSP of the issue and request
investigation and data corrections as needed, prior to final settlements
17
What ERCOT functions use AMS data?
TDSPs
AMS Data
Collection, VEE,
and Submittal
ERCOT
Usage Loading
(ESI ID Level
Data)
Data
Aggregation
ESI ID Level Data
Aggregated
Load Data
ESI ID
Level Data
ERCOT Reports
& Data Extracts
ERS Performance
Measurements
Wholesale
Settlement
Charges/Credits
(see Note 1)
ERO Fee
4-CP Billing
Determinants
REC RPS
Mandates
Load Forecasting
Credit
Calculations &
Collateral
Requriements
Operations
Extracts &
Reports
ERCOT
Budgeting /
Admin Fee
Note 1
Settlement Charge Types that Use AMS Data:
RUC Make-Whole Uplift Charge
RUC Clawback Payment
RUC Decommitment Charge
RUC Capacity Short Charge
Base Point Deviation Payment
RMR Service Charge
Voltage Support Charge
Black Start Capacity Charge
Charge for Emergency Power Increases
Real-Time Revenue Neutrality Allocation
Real-Time Ancillary Service Imbalance Revenue Neutrality Allocation
Cost Allocation for Ancillary Services (RU, RD, RRS, NS)
CRR Auction Revenue Distribution
CRR Balancing Account Closure
ERCOT System Administration Charge
Emergency Responsive Service Charge
18