product brochure

Transcription

product brochure
GreenPeak GP691
Version 1.04
ZigBee Home Automation Communications Controller
The GP691 ZigBee Home Automation Communications Controller provides a fully integrated solution for ultra low
power wireless communications for smart home appliances. It is compliant with the IEEE Standard 802.15.4, providing
robust spread spectrum data communication with a secure encrypted data flow. Its superior Wi-Fi interference
rejection and antenna diversity offer additional robustness in a crowded wireless 2.4 GHz environment.
The GP691 features a radio transceiver, integrated real-time Medium Access Control processor, integrated
microcontroller, RAM and Flash memory, security engine, event scheduler, and an extensive set of peripherals. The
integrated RF filtering simplifies the RF design complexity enabling very low cost single layer applications using simple
PCB antennas requiring no shielding and a minimum number of external components.
Advanced power management features ensure that power consumption is minimized in active as well as in standby
states, enabling maintenance free and very small form factor products.
The GP691 is capable of running the full stack and application for ZigBee Pro applications, including ZHA and ZLL. Its
2
internal microcontroller can communicate with external devices via UART, SPI or I C interfaces.
Chip Overview and Key Features
Excellent range through
antenna diversity
Ant.1
Ant.2
2.4 GHz
IEEE 802.15.4
Radio
IEEE 802.15.4
Real-Time
MAC
Robust to Wi-Fi
Interference
Packet Input / Output
Packet-in-packet
resynchronization
Data
Memory
Program
Memory
16 Kbyte
RAM
248 Kbyte
Flash
I2C Slave
UART
I2C
Master
16/32 bits
Keyboard
Scanner
AES-CCM*
G
P
I
O
XAP5™
high performance
microcontroller
IR
Generator
Power Management
32 MHz
Supporting intermitted energy sources
and coin cell batteries
GreenPeak Technologies is a fabless semiconductor
company offering innovative ultra low power wireless and
battery-free data communication technologies for
consumer electronics and sense and control applications.
Battery Monitor
Security Engine
Timing & Control
2
UART, SPI and I C
serial peripheral
interfaces
SPI
Master
MCU
Hardware accelerated
AES and CCM*
encryption
SPI Slave
LED
Generator
ADC
Timer / PWM
Engine
4 LED generator with
individual PWM
support
Watchdog
Full internal IO pull-up /
pull-down support during
active and standby states
GreenPeak Technologies B.V.
The Netherlands
+31 30 262 1157
[email protected]
www.greenpeak.com
GP691 ZigBee Home Automation Communications Controller
Low Cost
Excellent Range and Reliability
The GP691 is designed to operate on very low cost, single layer,
paper phenol like PCB material using only low cost components
and printed circuit antennas. No expensive shielding, chip
antennas or voltage regulators are required to design a high
performance Home Automation application. The integrated
microcontroller and program memory allow for fully integrated,
single chip applications and the integrated Real-Time MAC
greatly reduces software complexity and improves stability.
The GP691 has been optimized for reliable communication in
harsh radio environments. The -96 dBm receiver sensitivity
allows extended coverage. Built-in antenna diversity with two
antennas improves the reliable link budget by 9 dB resulting in
approximately twice the reliable range compared to similar
systems with only one antenna. In high density networks the
packet-in-packet resynchronization further improves the
communication reliability. The potential risks of interference by
Wi-Fi and/or Bluetooth devices have been reduced by the
combination of excellent receiver dynamic range and an auto
tuned band-pass filter.
Ultra Low Power Consumption
The GP691’s advanced integrated energy management system
allows it to operate from a standard lithium coin cell battery,
like the CR2032, as well as from intermittent power supplies like
photovoltaic (solar), electro-mechanical and piezoelectric, with
a minimum of additional components. It includes ultra low
power voltage level detectors and overvoltage protection
circuitry, allowing safe operation and graceful shutdown. The
battery lifetime monitor tracks the usage of the battery and
provides an early exhaustion warning.
Electrical Characteristics
Standards compliant
IEEE802.15.4-2003
IEEE802.15.4-2006
Radio Regulations compliant
ETSI EN 300 328
FCC CFR-47 Part 15
ARIB STD-T66
Frequency Band
Channels
Modulation
Chip rate
Data Rate
1
Receiver Sensitivity
2
Antenna diversity gain
2400 – 2483.5 MHz
16 (programmable, 5 MHz step size)
IEEE802.15.4
2 Mchip/s
250 kbit/s
-96 dBm typical
9 dB (increases the 'effective'
receiver sensitivity to -105 dBm)
Transmit Power
+7 dBm
(adjustable down in 1 dB steps)
32.000 MHz (±40 ppm)
Radio Management
Antenna Diversity
Digital RSSI
Link Quality Indication
QFN-32, 5x5 mm
-40 to +85°C (industrial)
-50 to +150°C
260°C (10 s max)
RoHS
1) At 3.0V and 25°C, unless specified otherwise.
2) For typical indoor usage in an environment with 50 ns delay spread
and 2 MHz signal bandwidth using the Rayleigh fading model:
antenna diversity with 2 antennas results in a 9 dB improved link
budget at a 1% outage probability compared to no antenna diversity.
The 9 dB in link budget translates into 80% more range, if using a two
slope range model with the breakpoint at 10m and g1 = 2, g2 = 3.5.
1 µA
760 µA
1
Operational Currents
Receive
Transmit (at 0 dBm)
12 mA
18 mA
Supply Voltage
1.8 to 3.6 V
Interfaces
Programmable GPIO lines
15 (QFN-32)
Analog input lines
2 (QFN-32)
20mA output drive GPIO
1
LED output lines
4
2
SPI Master, I C Master, and UART peripheral interfaces
High speed programming interface
Control for external LNA and/or PA
Crystal Frequency
General Characteristics
Package
Operating Temperature
Storage Temperature
Soldering Temperature
Compliance
GreenPeak Technologies’ reference designs, development kits,
software libraries and production platforms provide a quick
time-to-market solution for sensor and control devices for
Home Automation networks.
Radio Characteristics
1
Standby Mode Currents
Using internal RC oscillator
Using crystal oscillator
Reference Designs, Tools and SW
This document is the property of GreenPeak Technologies.
Information provided in this brochure is subject to change without prior notice and does not form part of an offer or contract.