LCALD6 - 6" SURFACE MOUNT LUMEN CANNON

Transcription

LCALD6 - 6" SURFACE MOUNT LUMEN CANNON
PROJECT INFORMATION
TYPE:
PROJECT:
CATALOG#:
LCALD6 - 6" SURFACE MOUNT LUMEN CANNON
SURFACE MOUNT ARCHITECTURAL DOWNLIGHT
SURFACE MOUNT ARCHITECTURAL DOWNLIGHT
FEATURE:
¶d"
§2"
§2"
SPECIFICATION
COMPATIBILITY
120V/277V LED
Application: Architectural-grade surface mount LED downlight housing for medium to high
ceilings combines energy efficiency with powerful lumen output. Perfect for atriums,
churches, lobbies, and airports that have high ceilings.
LPCM
LPCMJ
LPWM
Mounting: Universal mounting hardware allows mounting to all standard electrical junction
boxes. Optional pendant cable and wall mount assemblies available.
PENDANT ACCESSORY
FOR FLAT CEILINGS
PENDANT ACCESSORY
FOR SLOPED CEILINGS
6" WALL MOUNT
BRACKET
Driver: 120V/277V AC 50/60Hz Electronic Direct Current Class 2 driver integrally mounted
on large access Junction Box. Power Factor > 0.90. Operating Temperature: -10ºC to
+80ºC. Accessible from above or below ceiling. Consult Factory for dimming options and
compatible dimmers.
Lumen Maintenance: Minimum 50,000 hours L70 life based on ANSI TM-21 calculations
from LM80 standardized test results.
Thermal Management: Effective thermal dissipation facilitated by integral cast-aluminum,
finned heat sink design for maximum heat rejection to provide long LED life.
Thermal Temperature: Heat dissipation facilitated by exposed integral aluminum black heat
sink to maximize heat rejection in an open air environment. Recommended ambient
temperature is below 35 degree celsius to achieve minimum L70 life of 50,000 hours
according to LM80 standard.
Note: Wattage limitations on compatible items must be met.
Assembled in USA
Benefit
Benefit:
• 6 High lumen LED choices: 1400Lm, 2000Lm, 3000Lm,
4000Lm, 5000Lm, & 6000Lm.
• 120V/277V Input Standard (347V Available)
• Exclusive UniDimTM Universal LED Dimming Option works
with 0-10V, ELV and Incandescent Control Systems
• Smart DALI and DMX Dimming
Accessories: Pendant kits available in 12", 18", 24", 36", & 48".
See website for details.
Dimming: 0-10V dimming option (-D10) works with most 5-Wire 0-10V dimmers. Available
with 1% Deep Dimming Option. Factory qualified for use with Leviton IP710-DLX and Lutron
NTFTV-WH. The Lutron Hi-Lume (-DHL) and Ecosystem (-DEC) option designed for use with
LUTRON Ecosystem Controls. Uni-DimTM (-DUN) option is a universal dimming system that
works with most 3-Wire ELV, 2-Wire Incandescent and 5-Wire 0-10V fluorescent dimmers.
Safety Labels: ETL/cETL listed to UL1598 and UL8750. Suitable for dry and damp locations.
NYC approved: Calendar #41937.
CRI : 80+ Standard, 90 CRI Option
Finish: Available in White/Black Fins, All Black, All White and Silver/Black Fins.
Lumens: Available in 1400Lm, 2000Lm, 3000Lm, 4000Lm, 5000Lm and 6000Lm.
Beam Spread: Available in 10° Spot, Flood, 30° Narrow and 70° Wide.
ORDERING
LCALD6
LCALD6
ORDERING EXAMPLE : LCALD6W101-DUN
FINISH
Blank:White/Black Fins
B
:All Black
W
:All White
S
:Silver/Black Fins
BEAM SPREAD
Blank:Flood
-B10 :10° Spot
-B30 :30° Narrow
-B70 :70° Wide
DIMMING
Blank :Non-Dimming
-D10P1 :0-10V 1% Dim.*
-DLI
:DALI Dimming*
-DMX :DMX Dimming*
-DUN :UniDimTM**
LED
Blank
:3000K
-T27
:2700K***
-T27-C90 :2700K, 90 CRI***
-T35
:3500K***
-T40
:4000K***
* 5,000 Lumen option only available in Non-Dimming and Uni-Dim Drivers. ** Not available for 6000Lm.
***Extended lead time may apply for quantities over 100
A
Tel: 323.904.0200
Product specifications subject to change without notice.
www.liton.com
D I V I S I O N
L I G H T I N G
O F
G R O U P
ID#: 2639
LUMENS
101 :1400Lm
151 :2000Lm
320 :3000Lm
350 :4000Lm
450 :5000Lm
550 :6000Lm
File Located online www.liton.com/spec
2015.2.6
Warranty: Covered by a 5 Year Warranty to be free of defects in materials and
craftsmanship. Fixture should not be installed in applications with ambient temperature
above 60 degrees C. Doing so will result in reduced lamp life and voided warranty.