- Hochbach GmbH

Transcription

- Hochbach GmbH
- MACHINERY LIST February 2015
METAL SHEET DECORATING
B 943
MAILÄNDER/LTG COATING LINE
Years 1978/2000
Max. sheet size: 1145 x 960 mm
Working speed: 5000 – 6000 sheets / hour
Consisting of:
MAILÄNDER 760 sheet feeder, year 1978
MAILÄNDER 460 Coating machine, year 1978
Overhauled by MAILÄNDER in year 2000
with various accessories, e.g. several coating cylinders and 1 impression
cylinder
upgraded with VACUMATIC belt conveyor
LTG 30 m drying oven with fume incineration system, year 2000
max. 80 kg solvent/h, gas-heated,
max. 220° oven temperature at 5000 – 6000 sheets / hour
LTG single stacker
B 825
MAILÄNDER 169 1 COLOUR PRINTING MACHINE
Year 1983
Speed: 4000 up to 5000 sheets / hour
Max. sheet size: 1143 mm
Max. sheet length: 965 mm
consisting of:
MAILÄNDER 760 sheet feeder
MAILÄNDER 169 printing machine
GRAFOTEC alcoholic dampening system
MAN-MILLER remote controlled inking system
TECHNOTRANS water treatment system
BALDWIN ink agitator
BALDWIN blanket washing system
B 936
MAILÄNDER 160 1 COLOUR PRINTING MACHINE
Year 1969
Completely overhauled in 2000
Max. speed: 4.500 Sheets/hour
Max. sheet size: 1145 x 950 mm
Consisting of:
MAILÄNDER 760 sheet Feeder
MAILÄNDER 160 printing machine
with DAHLGREN dampening System
LTG stacker
Various spare inking rollers and dampening rollers
COIL CUTTING LINES
FULLY AUTOMATIC COIL CUTTING LINES
Speed from 70 sheets/min to 175 sheets/min
For aluminium, ECCS, tinplate, blackplate, TFS
Straight cut and scroll cut
With many options such as: Upender, Pin hole detector, Additional stackers,
Thickness gauge
- Important device for can-making or metal-printing companies
- Reduces tinplate-losses and production cost
- Low investment and maintenance level, short-term return-on-investment
PRE-PRESS EQUIPMENT
PRE PRESS EQUIPMENT
We supply new and secondhand equipment for pre press room, such as
copying frames, developing machines, gumming machines, plate baking ovens,
together with printing plates and printing blankets
B 836
FAG KORREX 2000 PROOFING PRESS
Year 1993
Max. printing size 1040 x 720 mm
Max. sheet size 1060 x 760 mm
Max. plate size 1070 x 820 mm
Length 4350 mm, width 1950 mm, height 1120 mm
MACHINERY FOR CLOSURES
B 874
COMPLETE SACMI CROWN CORK LINE
Consisting of:
1 x SACMI PTC 027/27 Press
Year 2001
For sheet size 1038x893 mm
27 strokes x 27 out
1 x SACMI PMC 250 Liner
Year 1998
Profile 923
1 x SACMI PMC 250 Liner
Year 2000
Profile 923
B 905
SACMI CROWN CORK LINER
SACMI PMC 250 Liner
Year 1996
CVS 3000 Video inspection
SSS Inspection Conveyor
CPT 100 Vacuum Control Carousel
Industrial Frigo Cooler
B 920
VARIOUS EQUIPMENT FOR SACMI CROWN CORK PRODUCTION
3 x Neuhäuser Magnetic conveyor 2200 x 1250mm
2 x INDUSTRIAL FRIGO chiller GRAC 55/Z of year 2002
With a chilling capacity of 51 KW (44.200 kcal/h)
3 x Magnetic elevator Chemaperm Type 76697
4x SSS-Inspektion band type 67 S
B 858
BLEMA STRIP PRESSES PKXD 40.3 FOR ALUMINIUM PILFER PROOF
CLOSURES
Year 1980, 1987
2x BLEMA PKXD 40.3 high speed strip feed presses with fully balances shaft
Complete with 6 punches dies for aluminium pilfer proof closures Ø 28 x h. 13,3
mm
Electrical panel by plugs
Rotary scrape separator
Motorized fan
Maximum capacity of the press: 40 tons
Length of the stroke: 90 mm
Maximum width of strip: 320 mm
Maximum length of strip: 1150 mm
Strokes per minute: 250
B 911
LINER FOR ALUMINIUM SCREW CAPS WITH PVC PLASTISOL
For screw caps diameter 28 mm
Height 13 mm upt to 15 mm
Performance: 220.000 caps / hour
8 x DATZ - hopper with storage bins
2 x NAROSKA GAV 4 S 2 liners, year 1980
1 x ALS drying oven, gas heated, year 2008
2 x BIAGOSCH & BRANDAU PVC-dispersing unit (stainless steel)
B 861
SACMI PMV 100 LINER FOR ALUMINIUM CLOSURES
Year 1992 and 1993
Work with PVC-free granulate
Closure sizes: 28 x 13,4 mm
Available tooling: 13,4 mm
With Chiller
B 896
COMPLETE PRODUCTION LINE FOR PLASTIC CLOSURES
Consisting of:
2 x SACMI CCM 01 Compression Molding Machine
Year 1997/ Year 1998
Tooling for PCO 1810 (25 x 19 mm) or PCO 1811 (28 x 15,5 mm)
With 32 positions
Max. speed: 600 pieces per minute
Nominal speed: 450 – 500 pieces per minute
1 x SACMI BTA900 Cutter
Year 1998
good price!
B 961
BIBRA CAP LINING MACHINE KGA 6 FOR TWIST-OFF CLOSURES
Year 2005
Set up for diameter 82mm
With 6 spraying stations up to 900 closures/ hour including
Dispening unit
Infeed and outfeed conveyor
Can be seen in production
B 962
NEITZ COMPOUND DRYING OVEN fOR TWIST-OFF CLOSURES
Width of oven 1 m wire mesh
4m heating zones with 2 gas burners including electrical warm up
Zone for closures
2 m cooling zone
Speed: approx. 600 closures/minute for diameter 66mm with 210°C 60 sec.
Optional: infeed and outfeed conveyer
Can be seen in production
M 006
COMPLETE PRODUCTION PLANT FOR THE PRODUCTION OF WINE
CAPSULES
Plant able to produce up to 300.000.000 capsules / a in three shift mode
Type of capsules: Shrinking capsules suitable for vegetable oil, spirits
DCM 4- (France) colour coating and printing machine (Flexo) suitable for
coating and printing foils of max. 300mm
Year 1977
DCM 4- colour coating and printing machine (Flexo) suitable for coating
and printing foils of max. 300mm
Year 1986
DCM 1- colour coating and printing machine (Flexo) suitable for coating
and printing foils of max. 300mm
Year 1984
No. 4 OMBA (Italy) capsule production machines
Years 1983 – 1984
No. 6 CONGEX 1000 (France) capsule production machines
Years 1976 – 1979, 3 of them equipped with lateral hot stamping unit,
1 additionally equipped with hot stamping unit suitable for decoration
of capsule head
No. 2 Congex capsule production machines, Years unknown
Accessories:
“Atlas Copco “ compressor, Type GA 90, 7,5 bar, Year 1995
approx. 4000 working hrs
No. 2 compressed air reservoirs, each with a capacity of 2000 litres
Bulk press “Welger”, Type SB 2000 L;
Numerous spares, toolings and foils available
Place: Germany
MACHINERY FOR COLLAPSIBLE ALUMINIUM TUBE PRODUCTION
T 1066
SCHULER X150 EXTRUSION PRESS
Press capacity: 150 tons
Stroke: 175 / 250 mm
Stroke rate: 60 - 110 min^-1
Max. diameter (wall thickness of 0,3 mm): 45 mm
Capacity: 15 kW/220/380V/50 Hz
Mode of operation: mechanical
Dimensions in width x depth x height: 3150 x 1100 x 1600 mm
Total weight: 5,5 tons
T 1071
MALL AT TRIMMER FOR ALUMINIUM COLLAPSIBLE TUBES
Year 1978 / rebuilt 2004
Machine type: AT
Serial No: 1168
Tube diameter range: 13,5mm - 66mm
Max. trimming length: 200 mm
Nominal speed: 100 – 120 pcs/min
Electricity: 380V, 50 cycles
State “as is”, size parts (expandring mandrels) and in- / output conveyor
missing;
In case of interest, please ask for separate quotation for new conveyors
T 1076
SPRIMAG ANNEALING OVEN TGO-G
Year 1983
Machine type: TGO-G-55-150-/2.0
Production speed: 150 pcs/min
Tube diameter range: 25 – 55 mm
Max. trimming length: 230 mm
Electricity: 380V / 50 cycles, 8,75 kW
Oven heating: natural gas
T 1040
SPRIMAG TGO ANNEALING OVEN
Year 1976
Gas heated
T 1067
SPRIMAG ANNEALING OVEN
Year 1973
Gas heated
Max. Temperature: 500 °C
no electrical cabinet
T 1077
SPRIMAG INTERNAL LACQUERING MACHINE
Year 1983
Machine type: HIL 32 T
Production speed: 150 pcs/min
Tube diameter range: 25 – 55 mm
Max. trimming length: 230 mm
Electricity: 380V / 50 cycles
Machine equipped with 6 spraying guns and intermediate drying unit
(electrically heated)
Size parts available: 30, 35, 40, 50 mm
Gun control equipped with Siemens S7 plc
T 1024
COATING MACHINE FOR CAN BOTTOM L22
Year 1975
Speed: 120 tpm
T 1013
DIETZ & ROLLWA CAP FEEDER
Type ESG 150 / 300 KF
230 / 400 V, 50 Hz, 0,12 kW
Year 1994
T 986
MALL HA 9 CAPPING MACHINE
Year 1989
With 3 stations
SIEMENS S5 control
Tube diameter range: 12 mm - 19 mm
Speed: max. 150 pcs/min
T 1012
MONTOLI CAPPING MACHINE
Year 1997, overhauled 2010
For diameter range 22 mm up to 40 mm
Equipped with diameter 28 mm
Speed: 120 tpm
T 1033
MALL HERLAN H1 CAPPING MACHINE
Year 1975
Speed: 120 tpm
T 1025
MALL H1 CAPPING MACHINE
Year 1975 (rebuilt in 1986)
Speed: 120 tpm
Operational voltage: 380 V
Control voltage: 24 V
Nominal current: 20 A
Frequency: 50 Hz
T 1044
FLUMS VSF 1 PACKING MACHINE
Year 1988
Tube diameter range: 25 mm-28mm – 32mm – 35mm
Length of tubes: 50mm – 200mm
Speed: max. 80 pcs/min
Last production: laminate tubes with diameter 25 mm
Electricity: 3 x 380 V, 50 cycles
Compressed air: 6 bar
Consumption: approx. 18Nm³/h
T 1045
MADAG TPAE/BFV HOT STAMPING MACHINE
Automatic roll-on stamping equipment:
4-station drum, electro-mechanical, with
4 individually driven and controlled stamping mandrels each
Tube sizes:
dia. 14 - 50 mm
min. 60 mm length
max. 200 mm length
Foil width:
max. 145 mm
Stamping die size:
max. 140 mm (width)
and max. 120/220 mm (length)
Stamping capacity:
up to 3000 stampings/h
Temperature range:
0 - 300°C
MACHINERY FOR ALUMINIUM AEROSOL CAN PRODUCTION
A 325
ERMO 150/80 AC SLUG CONVEYOR
Year 1979
For cans Ø 13,5 mm up to 40 mm
Used to feed a 120 cpm-press
With electric cabinet
A 321
SCHULER X 150 L PRESS
Completely overhauled in 2010
Power: 1500 KN
Number of strokes 1/min.: 75 - 150
Stroke of slide: 300 mm
New SIEMENS S7 control
Chop length: 217, 237, 277, 297 mm
A 347
HERLAN P 8 EXTRUSION PRESS
Year 1962
Press Capacity: 400 t
Stroke: 335 mm
Stroke rate: max. 80 min^-1
Max. diameter: 65 mm
Driving power: 3 / 22 kW
Dimensions in width x depth x height: 3960 x 2660 x 1760 mm
Total weight: 13 t
Machine equipped with mechanical toggle clutch, Siemens S5 plc, main drive
with frequency converter; mechanically overhauled in 2012
A 346
USED SCHULER HEAVY SPRING EJECTOR
Spring ejector used for production of Aluminium cartridges diameter 46,9 mm
mounted at Schuler X 400 press; adaptable for presses of different
manufacturers
A 348
POLYTYPE CAN TRIMMING MACHINE ALD 10
Year 1988
Production speed max 150 / min
Min trimmed can length 60 mm
Max trimmed can length 240 mm
Min can diameter 30 mm
Max can diameter: 53 mm
Max wall thickness: 0,70 mm
Size parts available, diameter: 35, 40 mm
3 x 380 V /50Hz, 18 kVA
Machine equipped with Siemens S5 plc
A 324
HERLAN SBM TRIMMING MACHINE
Year 1980
For cans with Ø 13,5 mm up to 40 mm
Up to 120 cpm
With cabinet and input chute
A 345
NUSSBAUM WASHING MACHINE FOR AEROSOL CANS
Year 1978
Machine type: DWA 75 VSS
Oven heating: Electrical
Chain pitch: 4 x ¾”
Can diameter range: 35mm - 59mm
Nominal speed: max. 75 pcs/min
Electricity: 380V, 50 cycles
Chain of washer as good as new!
A 350
NUSSBAUM EM38 NECKING MACHINE, 28 STATIONS
Year 1985
Production speed max 150 / min
Min trimmed can length 120 mm
Max trimmed can length 280 mm
Min can diameter 45 mm
Max can diameter: 70 mm
Stroke: 120 mm
Max. working stroke: 70 mm
Working stations: 28
Size parts available, diameter: 50, 53, 59, 66 mm
3 x 380 V /50Hz, 15,5 kVA
Tool carrier recently changed to a new one!
MACHINERY FOR COLLAPSIBLE PLASTIC TUBE PRODUCTION
T 1051
AISA RM COMPLETE PRODUCTION LINE FOR LAMINATED TUBES
Year 1992
Without packing station
Tube diameter range: 13,5 - 22 mm
Speed: Maximum 150 pcs/min
Size parts included: 22 mm
Laminate: ABL (Aluminium-barrier-laminates)
T 1052
AISA SAESA 150 COMPLETE PRODUCTION LINE FOR LAMINATED
TUBES
Year 1985
Including FLUMS VSE-15 packing machine
Tube diameter range: 22 - 35 mm
Speed: Maximum 150 pcs/min
Size parts included: 1 set, size on demand
Laminate: ABL (Aluminium-barrier-laminates)
T 1057
HINTERKOPF TE 28-06 DECO-OVEN FOR OVERPINT VARNISH
Year 1999
Without electrical cabinet
No chain
Drying time 2,6 min when equipped with 5 x 5/8" chain and a speed of 150
items per minute
Max. temperature: 100°C
Electrical heating
220/380 V with 50 hertz
Power 28,5 kW
Nominal heating power: 22,5 kW
Compressed air: 6 bar with air consumption 0.01 m³/h
Max. solvent content: 6.300 g/h
Exhausted air flow at 20°C: 383 m³/h
NEVER USED - GOOD
AS NEW
T 1068
DUBUIT SILK SCREEN PRINTER FOR PLASTIC TUBES
Model 951 of year 2003
5-colour printing machine with UV dryer
Size parts included: 25 mm - 30 mm - 35 mm - 40 mm - 50 mm
Electrical requirements: 400 V, 50 Hz, 3 phases
T 1056
HINTERKOPF CAPPING MACHINE FOR EXTRUDED PLATIC TUBES OR
LAMINATE TUBES
For diameter rang up to max. 50mm
Use to work with diameter 50mm for welded shoulders
Equipped with 1 set – size to be confirmed
Speed: 120 tpm
With 2 stations and 2 elevators
T 1008
OLI PACKING LINE
Year 2006
Speed: 120 tpm
Used for packing cylindrical tubes for cosmetics into cardboard boxes
(box dimensions 400 x 600mm)
Please contact:
HOCHBACH GmbH
P.O.Box 10 01 30
70771 Leinfelden-Echterdingen
Germany
Mr Uwe Gregorius / Mrs Christiane Lechler /
Mr Patrik Schmitt / Mr Wolfgang Knura
Tel: +49-711-90376-17
Mob: +49-171-28188-89
Fax: +49-711-90376-20
Email: [email protected]
Visit our homepage: www.hochbach.de
Powered by TCPDF (www.tcpdf.org)