docTAIDEN-HCS-4360 Series Datasheets - AV-iQ
download 
Report Transcription
TAIDEN-HCS-4360 Series Datasheets - AV-iQ
HCS-4100/50 Series Digital Congress System HCS-4360CE/50 Chairman Unit with Voting and Channel Selection Functions ■ ■ Compliant to IEC 60914 "Closed Loop - Daisy Chain" connection topology for a high operational system reliability: breakdown or replacement of a congress unit and connection failure of a cable will not influence other congress units in the system ■ Based on TAIDEN originated MCA-STREAM digital audio processing and transmitting technologies ■ Audio signals processed by high performance DSP: sound quality approaching CD quality ■ Gain and EQ (5 band) of each microphone adjustable separately, fitting the individual orator’s voice to achieve perfect speech pickup any time ■ Transmitting up to 64 CHs high quality digital audio signals on a dedicated 6-pin cable (general Cat.5 cable substitutable) ■ Supporting 48 kHz audio sampling rate, all 64 channels with a frequency response of 30 Hz to 20 kHz ■ Features ■ ■ Flush-mounting, stylish and ergonomic design ■ ■ Hi-Fi loudspeaker ■ Priority button ■ ■ Pluggable microphone ■ ■ 5 voting keys ■ “Closed Loop - Daisy Chain” connection topology ■ Transmitting up to 64 CHs high quality digital audio signals on a dedicated 6-pin cable ■ ■ Supporting 48 kHz audio sampling rate, all 64 channels ■ Automatic recovery facility, supporting "PnP" (plug and play) Stem microphone can be unplugged during adjournment, easy to maintain Mini-microphone, with foam windshield Hi-Fi loudspeaker, minimal feedback, mutes automatically when microphone is active ■ Excellent immunity to RF interference from mobile phones and comparable devices with a frequency response of 30 Hz to 20 kHz ■ Integrated 80 Hz (18 dB/octave) high-pass filter (low-cut switch) to cut low frequency elements from the audio when needed Microphone On/Off button, 5 voting keys Every delegate unit is assigned an individual ID for convenient setup and to avoid double ID forever Built-in channel selector consists of up/down channel ■ select buttons and 2-digit channel indicator display Facilities in stand-alone operation: Set the number of delegates permitted to speak at the same ■ Excellent immunity to RF interference from mobile phones ■ Gain and EQ (5 band) of each microphone adjustable ■ Supporting "PnP" (plug and play) ■ Equipped with cover to protect the unit from damage time Speak mode: OPEN/OVERRIDE/VOICE/APPLY/PTT separately x "OPEN" mode, microphone On/Off button with request-to-speak registration (AUTO) x "OVERRIDE" mode, microphone On/Off button control during the adjournment with override of the active microphones (FIFO) x "VOICE" mode, acoustic active sensitivity and automatic switch-off time adjustable continuously, built-in “flash-on” The stylish and ergonomically designed chairman unit has all the technology, immediate microphone activation on speaking necessary facilities to enable the user to chair a conference. It has x “APPLY” mode, delegate applies to speak by pressing excellent immunity to RF interference from mobile phones. Similar microphone On/Off button, delegate only speaks when in appearance to HCS-4360DE/50 Delegate Unit, operator or chairman approved his application the x "PTT" mode, press microphone On/Off button to talk HCS-4360CE/50 Chairman Unit includes a microphone priority Voting function (Yes/No/Abstain) button. When pressed, the priority button causes all currently active delegate microphones to be switched off temporarily Simultaneous interpretation or ■ permanently, allowing the chairman to take control of the meeting. Multiform voting in combination with the corresponding The chairman unit can also be used to start or stop voting, turn off software modules: all active microphones. Channel selection is automatically limited to For/Against the number of language channels available. The loudspeaker offers Parliamentary: YES/NO/ABSTAIN superior acoustics with minimal feedback for enhanced intelligibility. Questionnaire: 1/2/3/4/5 Audience response: --/-/0/+/++ Parliamentary (NPPV): YES/NO/ABSTAIN/NPPV 5.45 HCS-4100/50 Series Digital Congress System Mechanical Appraisal: Mounting Satisfied (Four keys voting: Flush-mounting Dimensions (h x w x d) (w/o stem mic.) perfectly satisfied/satisfied/basically satisfied/unsatisfied) 57 x 220 x 100 mm 0.72 kg Weight (incl. stem microphone) (Three keys voting: Charcoal gray Color satisfied/basically satisfied/unsatisfied) 410 mm (standard version), Stem length (Two keys voting: satisfied/unsatisfied) 240 mm, 330 mm, 470 mm Qualified (four/three/two keys voting) Competent (four/three/two keys voting) ■ Built-in IC-card reader ■ Key-press sign-in Ordering Information Automatic video tracking implementation when cooperating HCS-4360CE/50 ■ ■ (flush-mounting, 5 voting keys, IC-Card, 64 Activation at any time (if the amount of active microphones in CHs, cover, charcoal gray) the system is less than 6) ■ Priority button to switch off or to mute the speaking units according to preset (except VIP) ■ Approves/denies delegates' speaking request ■ Controls voting start and stop ■ System supports up to 100 chairman units, while only 1 chairman unit has the control facilities listed above (set by software) Controls and Indicators ■ Built-in channel selector consists of up/down channel select buttons and 2-digit channel indicator display ■ Fully Digital Congress System Chairman Unit with cameras, video switcher unit; preset positions on PC Uni-directional electret condenser microphone with two–color illuminated ring (blue/red) ■ Headphone volume up and down ■ Five voting keys with indicators ■ Microphone On/Off button with indicator ■ Priority button Interconnections ■ Socket for pluggable microphone ■ Ø 3.5 mm stereo headphone jack ■ 1.5 m cable with 6P-DIN plug ■ 0.6 m cable with 6P-DIN socket Technical Specifications Electrical Max. consumption Headphone connection Frequency response Earphone load impedance Earphone output Recommended microphone type Transducer Polar pattern Operating voltage Sensitivity Frequency response Input impedance Directivity 0°/180° Equivalent noise 1.8 W 30 Hz to 20 kHz >16 Ohm 10 mW Electret-condenser Uni-directional 5 VDC -46 dBV/Pa 50 Hz to 20 kHz 2 kOhm > 20 dB (1 kHz) 20 dBA (SPL) 125 dB (THD<3%) Maximum sound pressure level Interface data Ø 3.5 mm stereo jack for headphone Connector 5.46 HCS-4100/50 Series Digital Congress System HCS-4360DE/50 Discussion Unit with Voting and Channel Selection ■ Gain and EQ (5 band) of each microphone adjustable separately, fitting the individual orator’s voice to achieve perfect speech pickup any time ■ Transmitting up to 64 CHs high quality digital audio signals on a dedicated 6-pin cable (general Cat.5 cable substitutable) ■ Supporting 48 kHz audio sampling rate, all 64 channels with a frequency response of 30 Hz to 20 kHz ■ Integrated 80 Hz (18 dB/octave) high-pass filter (low-cut switch) to cut low frequency elements from the audio when needed ■ ■ Automatic recovery facility, supporting "PnP" (plug and play) Stem microphone can be unplugged during adjournment, easy to maintain ■ ■ Mini-microphone, with foam windshield Hi-Fi loudspeaker, minimal feedback, mutes automatically when microphone is active ■ Excellent immunity to RF interference from mobile phones and comparable devices ■ ■ Flush-mounting, stylish and ergonomic design ■ Hi-Fi loudspeaker ■ Pluggable microphone ■ 5 voting keys ■ “Closed Loop - Daisy Chain” connection topology ■ Transmitting up to 64 CHs high quality digital audio ■ Supporting 48 kHz audio sampling rate, all 64 channels ■ Built-in channel selector consists of up/down channel time Speak mode: OPEN/OVERRIDE/VOICE/APPLY/PTT x "OPEN" Excellent immunity to RF interference from mobile phones Gain and EQ (5 band) of each microphone adjustable Supporting "PnP" (plug and play) ■ Equipped with cover to protect the unit from damage On/Off button with with override of the active microphones (FIFO) x "VOICE" mode, acoustic active sensitivity and automatic switch-off time adjustable continuously, built-in “flash-on” technology, immediate microphone activation on speaking x “APPLY” mode, delegate applies to speak by pressing microphone On/Off button, delegate only speaks when operator or chairman approved his application separately ■ microphone x "OVERRIDE" mode, microphone On/Off button control select buttons and 2-digit channel indicator display ■ mode, request-to-speak registration (AUTO) with a frequency response of 30 Hz to 20 kHz ■ Facilities in stand-alone operation: Set the number of delegates permitted to speak at the same signals on a dedicated 6-pin cable ■ Every delegate unit is assigned an individual ID for convenient setup and to avoid double ID forever Features ■ Microphone On/Off button, 5 voting keys x "PTT" mode, press microphone On/Off button to talk Voting function (Yes/No/Abstain) Simultaneous interpretation during the adjournment ■ Multiform voting in combination with the corresponding software modules: For/Against The multi-functional delegate unit meets the demands of even the Parliamentary: YES/NO/ABSTAIN largest conferences. It provides facilities for speaking, listening, Questionnaire: 1/2/3/4/5 voting, selecting language channels and IC-card reading. It has Audience response: --/-/0/+/++ excellent immunity to RF interference from mobile phones. It Parliamentary (NPPV): YES/NO/ABSTAIN/NPPV features a channel selector and an IC-card reader. Channel Appraisal: selection is automatically limited to the number of language Satisfied (Four keys voting: channels available. The loudspeaker offers superior acoustics with perfectly satisfied/satisfied/basically satisfied/unsatisfied) minimal feedback for enhanced intelligibility. (Three keys voting: satisfied/basically satisfied/unsatisfied) (Two keys voting: satisfied/unsatisfied) Functions Qualified (four/three/two keys voting) Competent (four/three/two keys voting) ■ Compliant to IEC 60914 ■ "Closed Loop - Daisy Chain" connection topology for a high ■ Built-in IC-card reader operational system reliability: breakdown or replacement of a ■ Key-press sign-in congress unit and connection failure of a cable will not ■ ■ ■ Based on TAIDEN originated MCA-STREAM digital audio Set any delegate unit to be VIP unit Up to 32 units can be set as VIP in one system via processing and transmitting technologies ■ Automatic video tracking implementation when cooperating with cameras, video switcher unit; preset positions on PC influence other congress units in the system application software Audio signals processed by high performance DSP: sound quality approaching CD quality 5.47 HCS-4100/50 Series Digital Congress System VIP unit can be activated as long as the total of active microphones is not beyond 6 (incl. chairman/delegate/VIP unit) Controls and Indicators ■ Built-in channel selector consists of up/down channel select buttons and 2-digit channel indicator display ■ Uni-directional electret condenser microphone with two–color illuminated ring (blue/red) ■ Headphone volume up and down ■ Five voting keys with indicators ■ Microphone On/Off button with indicator Interconnections ■ Socket for pluggable microphone ■ Ø 3.5 mm stereo headphone jack ■ 1.5 m cable with 6P-DIN plug ■ 0.6 m cable with 6P-DIN socket Technical Specifications Electrical Max. consumption Headphone connection Frequency response 1.8 W 30 Hz to 20 kHz >16 Ohm Earphone load impedance Earphone output Recommended microphone type Transducer 10 mW Electret-condenser Uni-directional Polar pattern 5 VDC Operating voltage -46 dBV/Pa Sensitivity 50 Hz to 20 kHz Frequency response 2 kOhm Input impedance > 20 dB (1 kHz) Directivity 0°/180° 20 dBA (SPL) Equivalent noise 125 dB (THD<3%) Maximum sound pressure level Interface data Ø 3.5 mm stereo jack for headphone Connector Mechanical Mounting Flush-mounting Dimensions (h x w x d) (w/o stem mic.) 57 x 220 x 100 mm 0.72 kg Weight (incl. stem microphone) Charcoal gray Color 410 mm (standard version), Stem length 240 mm, 330 mm, 470 mm Ordering Information HCS-4360DE/50 Fully Digital Congress System Delegate Unit (flush-mounting, 5 voting keys, IC-Card, 64 CHs, cover, charcoal gray) 5.48 HCS-4100/50 Series Digital Congress System HCS-4361DE/50 Discussion Unit with Voting ■ Stem microphone can be unplugged during adjournment, easy to maintain ■ ■ Mini-microphone, with foam windshield Hi-Fi loudspeaker, minimal feedback, mutes automatically when microphone is active ■ Excellent immunity to RF interference from mobile phones and comparable devices ■ ■ Microphone On/Off button, 5 voting keys Every delegate unit is assigned an individual ID for convenient setup and to avoid double ID forever ■ Facilities in stand-alone operation: Set the number of delegates permitted to speak at the same time Speak mode: OPEN/OVERRIDE/VOICE/APPLY/PTT x "OPEN" mode, microphone On/Off button with request-to-speak registration (AUTO) x "OVERRIDE" mode, microphone On/Off button control with override of the active microphones (FIFO) x "VOICE" mode, acoustic active sensitivity and automatic switch-off time adjustable continuously, built-in “flash-on” Features ■ Flush-mounting, stylish and ergonomic design ■ Hi-Fi loudspeaker ■ Pluggable microphone ■ 5 voting keys ■ “Closed Loop - Daisy Chain” connection topology ■ Supporting 48 kHz audio sampling rate ■ Excellent immunity to RF interference from mobile phones ■ Gain and EQ (5 band) of each microphone adjustable technology, immediate microphone activation on speaking x “APPLY” mode, delegate applies to speak by pressing microphone On/Off button, delegate only speaks when operator or chairman approved his application x "PTT" mode, press microphone On/Off button to talk Voting function (Yes/No/Abstain) ■ For/Against separately ■ Supporting "PnP" (plug and play) ■ Equipped with cover to protect the unit from damage Multiform voting in combination with the corresponding software modules: Parliamentary: YES/NO/ABSTAIN Questionnaire: 1/2/3/4/5 Audience response: --/-/0/+/++ during the adjournment Parliamentary (NPPV): YES/NO/ABSTAIN/NPPV Appraisal: Satisfied (Four keys voting: The multi-functional delegate unit meets the demands of most perfectly satisfied/satisfied/basically satisfied/unsatisfied) conferences. It provides facilities for speaking, listening and voting. (Three keys voting: It has excellent immunity to RF interference from mobile phones. satisfied/basically satisfied/unsatisfied) The loudspeaker offers superior acoustics with minimal feedback (Two keys voting: satisfied/unsatisfied) for enhanced intelligibility. Qualified (four/three/two keys voting) Competent (four/three/two keys voting) ■ Functions ■ ■ ■ ■ "Closed Loop - Daisy Chain" connection topology for a high application software VIP unit can be activated as long as the total of active influence other congress units in the system ■ Set any delegate unit to be VIP unit Up to 32 units can be set as VIP in one system via congress unit and connection failure of a cable will not ■ Automatic video tracking implementation when cooperating with cameras, video switcher unit; preset positions on PC Compliant to IEC 60914 operational system reliability: breakdown or replacement of a ■ Key-press sign-in Based on TAIDEN originated MCA-STREAM digital audio microphones is not beyond 6 (incl. chairman/delegate/VIP processing and transmitting technologies unit) Audio signals processed by high performance DSP: sound quality approaching CD quality Controls and Indicators Gain and EQ (5 band) of each microphone adjustable ■ separately, fitting the individual orator’s voice to achieve perfect Uni-directional electret condenser microphone with two–color illuminated ring (blue/red) speech pickup any time ■ Headphone volume up and down ■ Supporting 48 kHz audio sampling rate ■ Five voting keys with indicators ■ Integrated 80 Hz (18 dB/octave) high-pass filter (low-cut switch) ■ Microphone On/Off button with indicator to cut low frequency elements from the audio when needed ■ Automatic recovery facility, supporting "PnP" (plug and play) 5.49 HCS-4100/50 Series Digital Congress System Interconnections ■ Socket for pluggable microphone ■ Ø 3.5 mm stereo headphone jack ■ 1.5 m cable with 6P-DIN plug ■ 0.6 m cable with 6P-DIN socket Technical Specifications Electrical Max. consumption Headphone connection Frequency response 1.8 W 30 Hz to 20 kHz >16 Ohm Earphone load impedance 10 mW Earphone output Recommended microphone type Transducer Electret-condenser Uni-directional Polar pattern 5 VDC Operating voltage -46 dBV/Pa Sensitivity 50 Hz to 20 kHz Frequency response 2 kOhm Input impedance > 20 dB (1 kHz) Directivity 0°/180° 20 dBA (SPL) Equivalent noise 125 dB (THD<3%) Maximum sound pressure level Interface data Ø 3.5 mm stereo jack for headphone Connector Mechanical Mounting Flush-mounting 57 x 220 x 100 mm Dimensions (h x w x d) (w/o stem mic.) 0.72 kg Weight (incl. stem microphone) Charcoal gray Color 410 mm (standard version), Stem length 240 mm, 330 mm, 470 mm Ordering Information HCS-4361DE/50 Fully Digital Congress System Delegate Unit (flush-mounting, 5 voting keys, cover, charcoal gray) 5.50 HCS-4100/50 Series Digital Congress System HCS-4362D/50 Discussion Unit with Channel Selection ■ Gain and EQ (5 band) of each microphone adjustable separately, fitting the individual orator’s voice to achieve perfect speech pickup any time ■ Transmitting up to 64 CHs high quality digital audio signals on a dedicated 6-pin cable (general Cat.5 cable substitutable) ■ Supporting 48 kHz audio sampling rate, all 64 channels with a frequency response of 30 Hz to 20 kHz ■ Integrated 80 Hz (18 dB/octave) high-pass filter (low-cut switch) to cut low frequency elements from the audio when needed ■ ■ Automatic recovery facility, supporting "PnP" (plug and play) Stem microphone can be unplugged during adjournment, easy to maintain ■ ■ Mini-microphone, with foam windshield Hi-Fi loudspeaker, minimal feedback, mutes automatically when microphone is active ■ Excellent immunity to RF interference from mobile phones and comparable devices ■ ■ Flush-mounting, stylish and ergonomic design ■ Hi-Fi loudspeaker ■ Pluggable microphone ■ “Closed Loop - Daisy Chain” connection topology ■ Transmitting up to 64 CHs high quality digital audio ■ Supporting 48 kHz audio sampling rate, all 64 channels ■ time Speak mode: OPEN/OVERRIDE/VOICE/APPLY/PTT x "OPEN" Gain and EQ (5 band) of each microphone adjustable Supporting "PnP" (plug and play) ■ Equipped with cover to protect the unit from damage button with with override of the active microphones (FIFO) switch-off time adjustable continuously, built-in “flash-on” technology, immediate microphone activation on speaking x “APPLY” mode, delegate applies to speak by pressing microphone On/Off button, delegate only speaks when separately ■ On/Off x "VOICE" mode, acoustic active sensitivity and automatic select buttons and 2-digit channel indicator display ■ microphone x "OVERRIDE" mode, microphone On/Off button control Built-in channel selector consists of up/down channel Excellent immunity to RF interference from mobile phones mode, request-to-speak registration (AUTO) with a frequency response of 30 Hz to 20 kHz ■ Facilities in stand-alone operation: Set the number of delegates permitted to speak at the same signals on a dedicated 6-pin cable ■ Every delegate unit is assigned an individual ID for convenient setup and to avoid double ID forever Features ■ Microphone On/Off button operator or chairman approved his application x "PTT" mode, press microphone On/Off button to talk Simultaneous interpretation during the adjournment ■ Automatic video tracking implementation when cooperating with cameras, video switcher unit; preset positions on PC ■ The multi-functional delegate unit meets the demands of even the Set any delegate unit to be VIP unit Up to 32 units can be set as VIP in one system via largest conferences. It provides facilities for speaking, listening and application software selecting language channels. It has excellent immunity to RF VIP unit can be activated as long as the total of active interference from mobile phones. It features a channel selector, microphones is not beyond 6 (incl. chairman/delegate/VIP channel selection is automatically limited to the number of language unit) channels available. The loudspeaker offers superior acoustics with Controls and Indicators minimal feedback, so increasing intelligibility. ■ Built-in channel selector consists of up/down channel select buttons and 2-digit channel indicator display Functions ■ ■ ■ Uni-directional electret condenser microphone with two–color illuminated ring (blue/red) Compliant to IEC 60914 "Closed Loop - Daisy Chain" connection topology for a high ■ Headphone volume up and down operational system reliability: breakdown or replacement of a ■ Microphone On/Off button with indicator congress unit and connection failure of a cable will not ■ ■ influence other congress units in the system Interconnections Based on TAIDEN originated MCA-STREAM digital audio ■ Socket for pluggable microphone processing and transmitting technologies ■ Ø 3.5 mm stereo headphone jack Audio signals processed by high performance DSP: sound ■ 1.5 m cable with 6P-DIN plug quality approaching CD quality ■ 0.6 m cable with 6P-DIN socket 5.51 HCS-4100/50 Series Digital Congress System Technical Specifications Electrical Max. consumption Headphone connection Frequency response Earphone load impedance Earphone output Recommended microphone type Transducer 1.8 W 30 Hz to 20 kHz >16 Ohm 10 mW Electret-condenser Uni-directional Polar pattern 5 VDC Operating voltage -46 dBV/Pa Sensitivity 50 Hz to 20 kHz Frequency response 2 kOhm Input impedance > 20 dB (1 kHz) Directivity 0°/180° 20 dBA (SPL) Equivalent noise 125 dB (THD<3%) Maximum sound pressure level Interface data Ø 3.5 mm stereo jack for headphone Connector Mechanical Mounting Flush-mounting Dimensions (h x w x d) (w/o stem mic.) Weight (incl. stem microphone) 57 x 220 x 100 mm 0.72 kg Charcoal gray Color 410 mm (standard version), Stem length 240 mm, 330 mm, 470 mm Ordering Information HCS-4362D/50 Fully Digital Congress System Delegate Unit (flush-mounting, 64 CHs, cover, charcoal gray) 5.52 HCS-4100/50 Series Digital Congress System HCS-4363D/50 Discussion Unit ■ Hi-Fi loudspeaker, minimal feedback, mutes automatically when microphone is active ■ Excellent immunity to RF interference from mobile phones and comparable devices ■ ■ Microphone On/Off button Every delegate unit is assigned an individual ID for convenient setup and to avoid double ID forever ■ Facilities in stand-alone operation: Set the number of delegates permitted to speak at the same time Speak mode: OPEN/OVERRIDE/VOICE/APPLY/PTT x "OPEN" mode, microphone On/Off button with request-to-speak registration (AUTO) x "OVERRIDE" mode, microphone On/Off button control with override of the active microphones (FIFO) x "VOICE" mode, acoustic active sensitivity and automatic switch-off time adjustable continuously, built-in “flash-on” technology, immediate microphone activation on speaking x “APPLY” mode, delegate applies to speak by pressing Features ■ Flush-mounting, stylish and ergonomic design ■ Hi-Fi loudspeaker ■ Pluggable microphone ■ “Closed Loop - Daisy Chain” connection topology ■ Supporting 48 kHz audio sampling rate ■ Excellent immunity to RF interference from mobile phones ■ Gain and EQ (5 band) of each microphone adjustable microphone On/Off button, delegate only speaks when operator or chairman approved his application x "PTT" mode, press microphone On/Off button to talk ■ ■ Supporting "PnP" (plug and play) ■ Equipped with cover to protect the unit from damage Set any delegate unit to be VIP unit Up to 32 units can be set as VIP in one system via application software separately ■ Automatic video tracking implementation when cooperating with cameras, video switcher unit; preset positions on PC VIP unit can be activated as long as the total of active microphones is not beyond 6 (incl. chairman/delegate/VIP unit) during the adjournment Controls and Indicators ■ The delegate unit meets the basic demands of conferences. It Uni-directional electret condenser microphone with two–color illuminated ring (blue/red) provides facilities for speaking and listening. It has excellent immunity to RF interference from mobile phones. The loudspeaker offers superior acoustics with minimal feedback for enhanced intelligibility. ■ Headphone volume up and down ■ Microphone On/Off button with indicator Interconnections ■ Socket for pluggable microphone Functions ■ Ø 3.5 mm stereo headphone jack ■ Compliant to IEC 60914 ■ 1.5 m cable with 6P-DIN plug ■ "Closed Loop - Daisy Chain" connection topology for a high ■ 0.6 m cable with 6P-DIN socket operational system reliability: breakdown or replacement of a congress unit and connection failure of a cable will not Technical Specifications Electrical influence other congress units in the system ■ Based on TAIDEN originated MCA-STREAM digital audio Max. consumption Headphone connection Frequency response processing and transmitting technologies ■ Audio signals processed by high performance DSP: sound quality approaching CD quality ■ Earphone load impedance Gain and EQ (5 band) of each microphone adjustable Earphone output Recommended microphone type Transducer separately, fitting the individual orator’s voice to achieve perfect speech pickup any time ■ Supporting 48 kHz audio sampling rate ■ Integrated 80 Hz (18 dB/octave) high-pass filter (low-cut switch) Polar pattern Operating voltage to cut low frequency elements from the audio when needed ■ Automatic recovery facility, supporting "PnP" (plug and play) ■ Stem microphone can be unplugged during adjournment, easy Sensitivity Frequency response Input impedance to maintain ■ Directivity 0°/180° Mini-microphone, with foam windshield Equivalent noise 5.53 1.8 W 30 Hz to 20 kHz >16 Ohm 10 mW Electret-condenser Uni-directional 5 VDC -46 dBV/Pa 50 Hz to 20 kHz 2 kOhm > 20 dB (1 kHz) 20 dBA (SPL) HCS-4100/50 Series Digital Congress System 125 dB (THD<3%) Maximum sound pressure level Interface data Ø 3.5 mm stereo jack for headphone Connector Mechanical Mounting Flush-mounting Dimensions (h x w x d) (w/o stem mic.) Weight (incl. stem microphone) 57 x 220 x 100 mm 0.72 kg Charcoal gray Color 410 mm (standard version), Stem length 240 mm, 330 mm, 470 mm Ordering Information HCS-4363D/50 Fully Digital Congress System Delegate Unit (flush-mounting, cover, charcoal gray) 5.54
