weaving equipment - The Handweavers Studio & Gallery

Transcription

weaving equipment - The Handweavers Studio & Gallery
the handweavers studio
& gallery
catalogue & pricelist | weaving equipment
2015–16
All prices include VAT at 20%
www.handweavers.co.uk
140 Seven Sisters Road, London N7 7NS
Tel: 020 7272 1891
the handweavers studio
2015-16
weaving equipment
looms
At the Handweavers Studio we recognise that a loom is a special purchase, and we like you to be
able to try a loom before you buy it. We regularly use all the models of table loom that we sell in
our classes and workshops, so if you visit us, you can roadtest them before buying.
We don’t have space to keep a range of floor looms on display but we generally have the smallest
Louet floor loom, the David, and also the smallest dobby loom, the Magic, available for you to try
in the display area, and we can help you make an informed decision on which of the larger Louets
is right for you, often by arranging to put you in touch with other weavers using them.
below:
Ashford 8 shaft table loom
right:
Ashford 16 shaft table loom
We believe that the way a loom is set up is crucial to the quality and pleasure of weaving on it, so
unlike many suppliers we assemble our table looms before selling them to you. That means the
hassle of the flat pack is entirely ours, not yours, and you can get weaving right away.
Ashford table looms
The Ashford table looms are well designed and sturdily made, and represent good value for
money despte a less favourable exchange rate this year. The four shaft and eight shaft table looms
fold down for transport (or sliding under a bed), and it’s perfectly possible to travel with them to
workshops and classes. The sixteen shaft is quite a bit larger and doesn’t fold down, but it can still
be carried by one not-too-little person.
The levers have a nice smooth action, are well spaced for flipping two or three at a time and,
being on the front, you can use them with either or both hands. All the looms come with a 10 dpi
reed.
Looms
Accessories
Normally kept in stock:
Additional reeds - 6, 8, 10, 12, 16 dpi
8 shaft 40cm
£595
30 cm
£30
8 shaft 60cm
£630
40 cm
£35
“Katie” 30cm
£725
60 cm
£47.50
Also available, usually within a week:
4 shaft 40cm
£560
4 shaft 60cm
£595
4 shaft 80cm
£630
8 shaft 80cm
£670
16 shaft 60cm
£1075
Stands
80 cm
£60
Ashford “Katie” folding loom
2nd back beams
The ultra-portable 8-shaft “Katie”
loom is the most easily folded of all
the folding table looms. And because
of the way it folds, the warp always
stays horizontal even when you’re
carrying the loom around, so it
doesn’t slide from side to side and fall
off the sticks or separating paper. It’s
perfect if you’re travelling to
workshops and classes (it comes with
its own bag), and is good as a
general sampling loom as well, with
the same easy lever action as the
standard table looms.
40 cm
£79.50
60 cm
£83
80 cm
£87
Heddles - per 100
8.5”/215mm£12.85
Stands with 4 treadles:
40 cm
£320
60 cm
£325
80 cm
£330
Extra deep stand for 16 shaft loom:
60 cm
£335
looms
The stands that fit the 4 and 8 shaft looms
come with 4 treadles. You can only tie one shaft
to one treadle, and you cannot get an
additional set of 4 treadles because you
wouldn’t have enough feet to work them! There
is an extra deep stand without treadles for the
16 shaft loom.
70 cm
£55
the handweavers studio
2015-16
Louët floor looms
Louet’s table looms have for years been
among the most popular on the market for
their smooth action, excellent finish, and
relative portability. They have recently been
redesigned to increase even further their
portability - the smaller one (40 cm) even has
a carrying handle attached to one side bar.
The distinctive overslung beater, easy-to-use
front-mounted levers and general weaving
enjoyment are much liked. These are excellent
looms for all-purpose weaving, with the benefit
that you can take them to workshops or hide
them away when you’re not using them. They
come supplied with a 10 dpi reed and a builtin 5 dpi/2 dpcm raddle.
We are great fans of the larger Louet looms - they have all been very thoughtfully and innovatively designed from the technical point of view,
as well as being beautifully made and attractive items of furniture. So although they are all relatively short from front to back, the sprung
beams on the Spring and Delta give a shed every bit as good as a Swedish-style floor loom more than twice the depth with very little stress on
the warp. And the parallel countermarche system on the Spring and Delta (and an equivalent system on the Octado and Megado dobby
looms) means there is very little stress on your knees either!
These looms are made and shipped to order by Louet, so there can be a lead time of up to twelve weeks. There are a number of options and
accessories for each of them, from second back beams to sectional warping, fly shuttles and benches. Contact us to discuss what you might
need and we will be able to price the whole package for you, including shipping.
David
If you want a floor loom with a small footprint, we would recommend the Louet David. It’s quite unusual in that it has a
sinking shed - the warp threads are pulled down instead of being pulled up - and parallel lams, which means that equal,
surprisingly light, pressure is needed to depress any of the treadles. The action of the treadles is very smooth and it’s an
extremely pleasant loom to weave on. It has eight shafts and ten treadles, allowing you to have a
full twill tie-up whilst keeping two treadles tied for plain weave. There is a built-in raddle and a
shelf incorporated into the castle, and the loom has recently been reconfigured slightly so that it
now boasts a sliding beater with a shuttle race. It’s not strictly a folding loom, but the back beam
can be loosened and pulled in to reduce the depth a little while not in use. Somewhat surprisingly,
the David will fit in the back of a medium-sized hatchback!
weaving equipment
Louët table looms
Louet Spring
Spring
David
70cm 8 shaft
£1,550
90cm 8 shaft
£1,650
Although it looks at first glance quite similar to the David, the Spring is
quite different mechanically. It’s a countermarche loom, which means
that the shed is created by raising some shafts and lowering the others,
so that there is always equal tension on all the warp threads, and the
threads are stretched less to create a shed of the same size. The front
beam swings in slightly when the shed is opened, reducing the tension
on the warp threads even more, so it’s light to treadle and excellent for
weaving inelastic threads such as linen or steel blends.
Delta
Louet Jane looms
right, on stand: 70 cm
left, folded: 40 cm
Looms (8 shaft)
2nd back beams
The next loom up in the range from the Spring is
the Delta. It’s functionally very similar, but has a
bigger warp beam (a definite advantage with long
warps or sectional warping), rear-hinged treadles,
and instead of the front beam swinging in, it’s the
back beam that relaxes to ease the tension when
the shed is opened.
40cm£595
40cm£97.50
70cm£725
70cm£115
Delta
“Jane” table looms & accessories
40cm£135
70cm£150
110cm 8 shaft
£2,450
90cm 12 shaft
£2,850
110cm 8 shaft
£2,600
110cm 12 shaft £3,000
£3,400
110cm 12 shaft £3,950
Heddles - per 100
205mm/8” £12.85
90cm 8 shaft
looms
Stands
Spring
Louet Delta
130cm 8 shaft
£3,600
130cm 12 shaft £4,100
the handweavers studio
2015-16
Magic
With dobby looms, the shafts selected for each successive pick are raised automatically either by
mechanical or electronic means, and all the Louet dobby looms come in both mechanical and
electronic versions.
With a mechanical dobby, for each pick in your weaving sequence you peg the pattern of shafts to
be raised in a lag; the lags together form a dobby chain which is moved on by pressing a lever or
a treadle.
An electronic dobby is linked to a computer (either PC or Mac). You generally advance to the next
pick by pressing a treadle. The main handweaving software packages (Fiberworks, PixeLoom,
WeavePoint etc) all have drivers for the Louet electronic looms.
These looms are also made and shipped to order and may have a lead time of up to twelve weeks.
As with the floor looms, there are many options and accessories available for each model, so get
in touch to discuss exactly what you need and we can price the whole package for you including
shipping.
Although it looks like a floor loom when it’s mounted on its stand, it’s better to think of the
Magic as essentially a table loom that happens to have a stand and treadle if you choose
to use them - some weavers always tuse the handle that fits into the top of the dobby
mechanism because the treadling can be very heavy. In the
mechanical version, you have to turn a knob to advance to the
next pick and then open the shed with the lever or the treadle. In
the electronic version the lever or treadle does both actions.
When mounted on its stand, the Magic has a treadle which, in the
electronic version, advances to the next pick and opens the shed;
in the mechanical version, it opens the
shed but you have to turn a knob to
advance to the next pick. Both versions
can be dismounted from the stand and
used as table dobby looms, if you want to
take them to a workshop, for example.
Magic
Megado
40cm 24 shaft
40cm 16 shaft
mechanical£1,800
mechanical£5,250
electronic£4,250
electronic£6,750
70cm 24 shafts
40cm 32 shaft
mechanical£2,300
mechanical£6,900
electronic£4,750
electronic£8,750
70cm 16 shaft
Octado
70cm 8 shaft
mechanical£3,550
electronic£4,750
90cm 8 shaft
mechanical£3,750
electronic£4,950
110cm 8 shaft
mechanical£3,950
electronic£5,100
mechanical£5,450
electronic£6,950
70cm 32 shaft
mechanical£7,150
electronic£9,150
110cm 16 shaft
mechanical£5,950
electronic£7,550
110cm 32 shaft
mechanical£7,750
electronic£9,750
130cm 16 shaft
mechanical£6,250
electronic£7,850
Octodo
While the Magic Dobby has a lot in common
with a table loom, the eight-shaft Octado has
more in common with the Louet floor looms.
When the shed is opened, the back beam lifts
up, releasing tension and creating in effect a
countermarche shed. The tensioning system on
the sprung breast beam allows you to set the
tension consistently each time you wind on.
Treadling is very light, and you can use either
or both feet - an important ergonomic
advantage.
Megado
The top of the Louet range, the Megado
has the same tensioning system as the
Octado, the same countermarche effect
through the moving back beam, and the
same easy treadling with either foot - it
just has twice or four
times as many shafts,
depending on your
choice or pocket! It
also comes in a
greater choice of
widths.
mechanical£8,100
electronic£9,950
the handweavers studio
looms
130cm 32 shaft
weaving equipment
Louët dobby looms
2015-16
Ashford “Knitters” loom
Rigid heddle looms are the most straightforward
of all looms to use, with just one key
component (the “rigid heddle”) used both to
raise alternate wqrp threads and to beat the
weft threads into place. They are excellent if
your interests lie primarily with colour and
texture, although you can also create more
complex patterns and use finer threads if you
add a second heddle. You can also use them
for weaving wall hangings and for tapestry
weaving.
There are various models of Ashford rigid
heddle, from the small “SampleIt” through the
ultra portable folding “Knitters” looms to the
tried and tested standard rigid heddle loom.
All can be used flat on a table or resting on
your knees, or if you prefer you can get a stand
for any of them except the SampleIt.
Designed to be easily portable and to allow you
to get weaving quickly, the knitters looms fold in
the middle with your weaving still in place and
slip into a bag. Like the standard rigid heddle
loom, it can be fitted with a second heddle if
you want to weave finer or create more
complex patterns.
If you know you will often be carrying the loom
around you may want to choose the option that
includes a custom bag.
Ashford standard rigid heddle
loom
Ashford “SampleIt” loom
The baby of the Ashsford rigid heddle looms,
the SampleIt has a weaving width of 20cm (8”),
weighs only a fraction over a kilo, and is ideal
for new weavers or for more experienced
weavers wanting to sample yarns or techniques.
It coms with a 7.5 dpi heddle; other sizes are
also available so you can vary the size of yarn
you use.
£99
additional rigid heddles
5, 7½, 10, 12½ dpi
£13.25
16” / 40cm
£135
24” / 60cm
£145
32” / 80cm
£155
48” / 120cm
An inkle loom is designed for weaving
long narrow items such as braids,
straps, belts, wristbands and edging
trims.
The Ashford inkle loom is a table-top
model with a maximum weaving width
of 10 cm (4”) and can take a warp as
long as 3.5 m (11’5”).
The mini version, the “Inklette”, is
ultra-portable, weighing a little over
half a kilo, with a weaving width of 5
cm (2”) and a weaving length of 1.8
m (72”)
£290
additional rigid heddles
12” / 30cm
£190
with bag:
£205
20” / 50cm
£205 with bag:
£235
28” / 70cm
£225
with bag:
£275
additional rigid heddles - 5, 7½, 10, 12½ dpi
8” / 20cm loom
The standard rigid heddle loom, made from
silver beech hardwood, comes in four widths
and, like the Knitters loom, can be fitted with
a second heddle kit for extra versatility.
inkle looms
weaving equipment
rigid heddle looms
12” / 30cm
£16.25
20” / 50cm
£21.50
28” / 70cm
£25.75
5, 7½, 10, 12½ dpi
16” / 40cm
£17.50
24” / 60cm
£21.75
32” / 80cm
£26.50
48” / 120cm
Ashford inkle loom
£72.50
Ashford “Inklette”
£44
£50
2nd heddle kit
(fits all widths)
£16
stand
2nd heddle kit
(fits all widths)
£27
12” / 30cm
£90
20” / 50cm
£94
28” / 70cm
£114
£96
24” / 60cm
£97.50
32” / 80cm
£99
48” / 120cm
£155
looms
stand
16” / 40cm
the handweavers studio
2015-16
Tapestry weaving can be done on a simple frame or on a special upright loom. You can also use
a rigid heddle loom although this doesn’t allow you to see as much of your work at one time.
tapestry frames
Asford tapestry loom
Formed from two pairs of sides, so you can
configure the frame’s proportions to suit your
personal preferences. All the sidepieces are
wooden, 5 cm (2”) breadth by 1.7 cm (0.75”)
depth, with mitred corners. We recommend a
maximum size of 76cm x 107cm (30” x 42”) for
a frame.
We stock two weights of sidepieces - standard
and narrow. Please note, it’s not possible to mix
the two in one frame.
Many people find a tapestry loom such as
this to be more comfortable than a standard
tapestry frame
because it is
height-adjustable
and the angle of
tilt can easily be
varied. It also has
an adjustable warp
tension system and
a shedding system.
standard sidepieces
46cm (18”)
£11.50 per pair
61cm (24”)
£13.50 per pair
76cm (30”)
£15 per pair
91cm (36”)
£22 per pair
107cm (42”)
£24 per pair
narrow sidepieces
35cm (14”)
£7 per pair
50cm (20”)
£8 per pair
tapestry frame holders
Double-pivoted brackets that can be secured by
G-clamps to any horizontal or vertical surface
enabling your tapestry frame to be held securely
at a comfortable angle.
£415
38” “Zeus”
154 x 88cm (61” x 35”)
£520
22ӣ15
A wooden-handled beater with12 metal prongs
set into a 4” width, weighing 140 gms.
£27.50
Hokett mini “handloom” frames
These exotic-wood frames, handmade in the
US by master woodworker Jim Hokett, are
curved to hold comfortably in your hand as
you work. They’re ideal for small-scale
tapestries and you have the option of using the
loom as a stand for the completed piece or
cutting the tapestry off so you can re-use the
loom.
“original” (approx 8” x 7”)
“tiny” (approx 6” x 4”)
copper wire shapes
triangles
£30
£25
heddles
for easy setting up of
the shedding device
£23.25 per 100
loom stand
A tripod stand to hold
any of the Mirrix looms
securely, whether you
want to stand or sit. Can be used with the
treadle kit.
£295
5”, 8”£2.50
rings
16cm
3”, 4”, 5”, 6”, 8”, 10”
£2.50
12”, 14”, 16”, 18”, 20”
£2.75
treadle kit
The treadle replaces the shedding device
handle and turns your Mirrix loom into a
floor loom.
£225
the handweavers studio
tapestry weaving
£22.50
large (approx 2” width, 14 prongs) £27.50
Made from ash, sycamore, beech or mahogany.
22cm£14.50
150 x 72cm (59” x 29”)
wide-sett tapestry beater
small (approx 1” width, 4 prongs)
brass-tipped £15
£375
32” “Joni”
16ӣ14
£6.50
£10
28” “McKinley” 150 x 62cm (59” x 25”)
12ӣ13
£22.50 per pair
hand-turned tapestry bobbins
£295
tapestry beaters
individual clamps
£3.75
119 x 48cm (47” x 19”)
additional warp coils
excluding clamps
Wooden, 13cm (5¼”) long
£255
22” “Zach”
£520
Handcrafted from British wood
standard tapestry bobbins
16” “Big Sister” 86 x 33cm (34” x 13”)
Mirrix accessories
all-wood tapestry beaters
tapestry bobbins
These sturdy but portable metal looms are designed for tapestry weaving but also used for
beading. They can cope with a high warp tension without a hint of bowing; they have fold-out
legs so you can stand them on a table if you want (although you can use them on your lap if
you prefer), and they have a shedding device. Warp coils make it easy to space your warp
accurately and evenly; coils for 8, 12, 14 and 18 ends per inch are included with each loom.
We keep stock of the 12”, 16” and 22” looms and supply
the larger sizes to order. Because the looms have a
continuous warp system, the maximum length you can
weave is almost twice the loom’s maximum height. The
measurements given below are the weaving length x
weaving width.
12” “Little Guy” 60 x 22cm (24” x 9”)
£225
height: 173cm
(68”)
width: 122cm (48”)
weaving length x
width:
73.5 x 103.5cm
(29” x 40”)
£34 per pair
holders incl clamps
Mirrix looms
weaving equipment
tapestry & rug weaving
2015-16
inkle shuttles
stick shuttles
boat shuttles
standard stick shuttles
Swedish boat shuttles
Approx 2 cm (7/8”) wide, with U-shaped
ends.
Flat-bottomed, with a pivoted bobbin pin to
take bobbins or quills.
23 cm (9”) £2
mini (20 cm / 8”) £24
Made from British woods and finished to a
smooth lustre.
38 cm (15”) £2.25
30 cm (12”)
£17.50
approx 20 cm (8”)
51 cm (20”) £2.50
35.5 cm (14”)
£20
61 cm (24”) £2.75
inkle belt shuttle
£18.00
double boat shuttles
small exotic wood shuttles
Exquisite little stick shuttles that come
into their own for fine pick-up work.
6” x 0.5” (approx)
£8.25
8” x 1” (approx)
£10.25
Similar to the standard Swedish boat shuttles
but with two cavities for use with two
separate bobbins on a single pivoted bobbin
pin.
30 cm (12”)
£21.50
assymmetric inkle shuttle
A different design of inkle shuttle, also
handcrafted from a variety of British woods
and finished to the same smooth lustre.
curved boat shuttles
ski shuttles
Swedish, flat-bottomed with upturned ends
and hooks mounted on the upper surface
to hold a large quantity of thick yarn.
64 cm (25”)
£18
approx 23 cm (9½”)
Handcrafted from British woods and
finished to a smooth lustre, each
one is slightly different. The curved
shape feels comfortable in the
hand.
approx 30cm (12”)
inkle-weaving pick-up sticks
Small pick-up sticks handcrafted from
British woods designed for pick-up in
inkle weaving
Handcrafted from a variety of British woods
finished to a smooth lustre,these
shuttles are cunningly designed with
a wedge-shaped profile to mirror
the shape of the shed
Swedish, double-sided, I-shaped in
cross-section, useful for shallow sheds
and vertical looms.
49 cm (19½”)
£19
£18.00
£45
wedge-profile boat shuttles
rug shuttles
weaving equipment
shuttles (see also our Bluster Bay shuttles on the following page)
approx 26 cm (10”)
£9.50
£45.00
Hokett low-profile boat shuttles
Small low-profile boat shuttles ideal for pickup or at the very end of a warp as well as
for damask and split-shed weaving.
Handcrafted from British woods
and finished to a smooth lustre.
Handcrafted from American woods by
master woodworker Jim Hokett, for small
sheds and ends of warps.
18 cm (7”)
£35.00
15 cm (6”)
£22.75
20 cm (8”)
£25.00
30 cm (12”)
£35.00
shuttles
damask shuttles
the handweavers studio
2015-16
Bluster Bay’s avowed aim is to produce “supremely beautiful, seriously functional textiles tools”,
and their shuttles are certainly a perfect marriage of form and function. Crafted from exotic woods,
they are finished with Danish oil and then waxed and polished to a satiny sheen, so that they are
not only sensuous but also glide effortlessly through the shed.
We try to keep a a wide selection of woods available so get in touch with us if you want something
particular, either in terms of appearance or weight.
closed-bottom boat shuttles
super-slim boat shuttles
The Bluster Bay boat shuttles have a very low
profile compared with standard shuttles, making
them ideal for table looms with a shallower
shed.Because of the low profile, you need to use
paper quills, not bobbins.
These are very slim from back to front and also
have an extemely low profile, making them
perfect for squeezing that last little bit of
weaving out of the end of a warp, or for
techniques such as pick-up, damask or
opphämta. To kep the profile as low as
possible, they are only available with open
bottoms and have to be used with quills not
bobbins.
20cm (8”)
£34.50
30cm (12”)
£37.50
45cm (18”)
£45
20cm (8”)
30cm (12”)
£34.50
£37.50
45cm (18”)
£45
end-feed shuttles
End-feed shuttles are so called because the yarn
feeds from the end of a static pirn instead of
feeding from the side of a spinning bobbin or
quill. They deliver the weft yarn at a constant
tension without the weaver having to
manipulate each pick.
Bluster Bay offer two tensioning systems. The
hook tensioning system is simple and elegant a series of hooks which the yarn can be zigzagged around until the perfect tension is
reached. We stock these shuttles with an open
bottom which keeps the weight right down, so if
you have any carpal tunnel or RSS problems,
these are the ones to go for.
There is also the Honex tensioning system which
can deliver more precise weft tension and may
be preferable for ultra-fine, stretch or flyaway
yarns. These are available with both closed and
open bottoms, and are supplied with an Allen
key to adjust the tensioning.
The larger shuttles have a profile of 3.5cm
(1.4”); the 11” shuttle has a lower profile of
2.5cm (1.1”) and the 11½” is 3cm (1¼”).
double boat shuttles
Unlike the Swedish double boat shuttles, these
have two pivoted bobbin pins, making it easier
to change or fill one bobbin at a time. They
have the same low profile as the single boat
shuttles.
35cm (14”)
£45
weaving equipment
bluster bay shuttles
hook-tensioned end-feed shuttles
hook-tensioned EFS
Open-bottomed.
11” “mini” (28cm)
£77.50
13” (33cm)
£87.50
Honex-tensioned EFS
Open-bottomed
11½” (29cm)
£125
15” (37.5cm)
£150
Closed-bottomed
11½” (29cm)
£125
15” (37.5cm)
£150
pirns
4½” paper pirn (for 11”, 11½” shuttles)
£1.85
poke shuttles
5½” plastic pirn (for 13” shuttles)
Double-sided, like a mini rug shuttle, these little
shuttles are great for inlay work, slipping easily
in and out of the shed without damaging the
warp ends.
15cm (6”)
£15
23cm (9”)
£17
30cm (12”
£19
Honex-tensioned end-feed shuttles
£5.75
8” plastic pirn (for 15” shuttle)
£5.75
ski shuttles
Flat-bottomed with upturned ends and the smoothest finish imaginable on the
underneath to glide through any shed. Perfect for rug weaving.
£37.50
24” (60cm)
£42.50
the handweavers studio
shuttles
18” (45cm)
2015-16
warping boards
warping mills
swifts & winders
standard warping board
standard warping mill
standard metal bobbin winder
Louet bobbin winder
Made by Ashford with a maximum warp length
of 11m. The pegs are completely straight, easily
glued in place,
and relatively
short to prevent
bowing - you
make wider
warps in
multiple
sections. Use
flat or clamped
upright on a
table (clamps provided), or fasten to a wall with
the mirror plates we provide.
A vertical mill, made by
Ashford, for warps up to
15m.
Metal with a brass gear wheel. It clamps to a
table or shelf with a built-in clamp and has a
thin metal prong which works with both wooden
and plastic bobbins and with quills.
A wooden winder which works with quills,
plastic bobbins, and the Louet sectional
warping bobbins.
£147
Ashford bobbin winder
metal pirn winder
mini warping mill
A lovely little table-top mill
made by Jim Hokett. The
circumference is one yard
so it’s ideal for warps up to
5 yards or metres, longer
with fine yarns.
£79
mini warping board
Ashford’s “Katie” warping board with a
maximum warp length of
4.5m is perfect for sample
warps. It’s supplied with
the pegs already glued
into the side pieces – you
simply have to bolt four
side pieces together.
£65
£85
£120
winding station
Similar to the standard bobbin winder but with
a thicker prong for winding the pirns used in
end-feed shuttles.
£100
A wooden winder designed for use with
plastic bobbins but not with quills or
wooden bobbins. Can be fitted with a
balloon spring.
£73
balloon spring
bobbins & quills
Slip this onto a standard winder to use it with
wider diameter spools and pirns.
paper quills
£6.85
Suitable for use in boat shuttles
9cm£0.60
umbrella swift
11cm£0.60
Wooden with a built-in clamp for fixing to a
table (vertically) or - much better, we think horizontally, for example to a chair back.
13cm£0.60
£62
For use in boat shuttles.
24ӣ16
Designed and made to the Handweavers
Studio’s own design, this winding station
combines a cone stand, spool rack and
doubling stand. It also has provision for ball,
cone and bobbin winders to be clamped to the
top, and an upstand to enable a swift to be
mounted horizontally (the preferred way) so that
all but the most
delicate yarns can
be wound directly
onto a winder at
the other end. (For
a few fine yarns
the angle may be
too oblique.)
Eyelets above the
cone stands feed
threads upwards
for warping.
(Swift and winders
are not included.)
38ӣ21
£195
£87
raddles
Plastic separators, 2 dents per cm (5 per inch),
as used in Louet looms, spread your warp more
evenly than traditional nail raddles.
30cm£21
40cm£26
60cm£36
80cm£46
nail raddles
Half inch divisions.
15ӣ12.50
wooden bobbins
9cm (3½”)
£2
plastic bobbins
For use in boat shuttles.
11cm (4¼”)
swift/skein winder
Metal with plastic casing, ideal for finer yarns.
Clamps vertically or horizontally.
£2.10
plastic pirns
For use with end feed shuttles.
£37.50
5½”£5.75
ball winder
paper pirns
For winding wool and other thicker, nonslippery yarns into balls.
For use with Bluster Bay 11” & 11½” end
feed shuttles.
£25
4½”£1.85
8ӣ5.75
the handweavers studio
winding & warping
Handweavers Studio standard raddles
weaving equipment
winding & warping equipment
2015-16
threading hooks
heddles
yarn gauges
temples
standard threading hook
Texsolv ® polyester heddles
standard yarn gauge
17.5cm straight blade
205mm - Louet Kombo, Jane, Magic Dobby
£5.85
220mm (8½”) - Ashford table & Katie looms
Precise cut-outs of a centimetre and an inch
enable you to do your
yarn counts more
easily and accurately.
These temples are made from Swedish
wood. Each is adjustable to fit any weaving
width within the ranges shown below.
long threading hook
27.5cm angled blade, more convenient for
larger floor looms and multishaft looms.
£5.85
combined threading/reed hook
double-ended, with a threading hook one end
and a reed hook the other.
£9.75
270mm (10½”) - Harris Foldaway floor loom
330mm - Louet Octado, Delta
390mm - Louet Spring, Megado
£12.85 per 100
wire heddles
240mm (9½”) - Leclerc Voyageur, Harris table
loom
wire eye
£12.85 per 100
inserted eye
£17 per 100
reed hooks
Texsolv ®
standard reed hook
polyester loop cord
S-shaped, made from
aluminium.
£1.50 per metre
£4.75
£19.50 per 20m spool
pegs
A very easy-to-use tool - simply twizzle the
gauge until the cut-out
(either inch or
centimetre) is full, then
count the wraps. Much
quicker than a ruler,
and it feels so much
nicer in the hand!
40-55cm£29
£28.50
A handy gadget that makes it easier to
twist fringes consistently and can also be
used for making cords.
£9 (pack of 25)
A long straight
blade set into
a wooden
handle.
anchor pegs
£9 (pack of 25)
£6.75
All our reeds are stainless steel. We aim to
have the sizes listed here in stock all the time
and can supply other lengths and densities to
order.
reeds (see also under rigid heddle looms)
6, 8. 10, 12, 14, 15, 16 dpi
30cm£30
70cm£55
40cm£36
80cm£60
£14.25
60cm£47.50
combined threading/reed hook
20dpi
Double-ended, with a threading hook one end
and a reed hook the other.
30cm£35
70cm£62.50
£9.75
40cm£40
80cm£70
60cm£55
The 21st century replacement for a MacMorran
balance, this kit includes all you need to work
out quickly and accurately what the count is of
unknown yarns in your stash and how much
you have on a cone. The kit comprises a digital
scale (accurate to
one-hundredth of a
gram), a measuring
cord, a quick ypp/
mkg formula card,
the formulae for the
six most common
count systems, and
an interactive spreadsheet emailed to you on
request after purchase.
50-75cm£29
60-90cm£31
80-130cm£39
fringe twisters
2 prong
£24
3 prong
£26
4 prong
£28
gripfids
The crucial tool for plysplit braiding. Available
in three sizes.
small
£14.50
medium
£14.50
large
£14.50
set of three
£37.50
£37.50
linen testers
tablets (for tablet/card weaving)
Also known as pick glasses or
linen counters, the model we
stock has a double element to
minimise distortion, and both
metric and imperial markings.
Four-sided or six-sided.
pack of 10
£4.20
pack of 25
£8.40
£18
the handweavers studio
weaving accessories
arrow pegs
Engineered to move from one dent to the next
as you pull
each end
through the
reed.
turned wood yarn gauge
yarn count calculation kit
reed knife
creeping reed hook
£8
weaving equipment
weaving accessories
2015-16