Water Bowl LA BUVETTE - Antiseptica 2000 Kft.

Transcription

Water Bowl LA BUVETTE - Antiseptica 2000 Kft.
Water Bowl LA BUVETTE
Plastic Water Bowl FORSTAL 2
with dirt protection
• water bowl made of sturdy, flexible, wear and impact
resistant plastic • valve protected by a removable cap (impact,
frost and dirt protection) • rounded corners make it easy to
clean and eliminate the risk of injury for the animals • 3/4"
water connection possible from various sides • with 6 fastening
points for mounting on walls and pipes
222712
ref. no.
description
€
223470
FORSTAL 2 item 3081 with nose paddle
and 3/4" brass valve
1/10
160
223471
FORSTAL 2 item 3082 with 3/4" brass valve
1/10
160
222712
222942
mounting bracket < ø 50 mm
mounting bracket ø 50-75 mm
1
1
-
Water Bowl F30, Polycoat
• water bowl with brass tube valve • mounting with 4 screws • multidirectional connection 3/4” • flow rate to be adjusted from the outside by a screw
from 0 – 18 l/min. • large drinking bowl: length 319 mm, width 260 mm,
height 178 mm • special valve that reacts at a pressure of 600 g • 9 possibilities for connecting
ref. no.
description
222706
222712
222942
water bowl F30
mounting bracket < ø 50 mm
mounting bracket ø 50-75 mm
€
1
1
1
56
-
Water Bowl BABYLAB
• cast iron bowl for young cattle with remaining water behind the valve
v• when animals try to drink, they activate the tap unintentionally and learn
on their own how to use a drinker • easy-going tube valve opens already at
a pressure of less than 500 g • water flow rate to be adjusted easily from the
outside with a screwdriver (from 0 to 8 l/min • 1/2” top water inlet
222712
ref. no.
description
222709
222712
222942
water bowl BABYLAB
mounting bracket < ø 50 mm
mounting bracket ø 50-75 mm
€
1/2
1
1
360
-
133
133
WK462_Haupt_133-143_EN_Rind.indd 133
21.12.2010 9:29:34 Uhr
Water Bowl LA BUVETTE
Water Bowl LAC, Polycoat
223490
• cast iron drinking bowl with float valve • connection
on horizontal tube 3/4” or from the bottom 1/2” with
extension 222873 • allows individual cut-off in case
of colic • bottom discharge
ref. no.
description
€
222707
223490
222754
water bowl LAC 5
water bowl LAC 55
spare valve for LAC 5, LAC 55
1
1
1
40
40
-
222707
Float Bowl BIGLAC 25
• 17.5 cm deep trough made of highly resistant polyethylene with broad edge reducing
spills by lapping • with constant water level • capacity: 25 litres • bottom discharge
• float valve is not accessible for animals and resists a pressure of 9 bar • high water
flow rate of 34l/min. at 4 bar • galvanized mounting plate • easy wall or tube mounting
• water inlet by braided stainless steel hose, top or bottom, right or left, 1/2” female
thread • convenient for 25 animals
ref. no.
22349
€
1
24
Float Bowl BIGLAC 55
• deep double drinking bowls (30 cm and a capacity of 55 litres) made of high-density polyethylene with
broad edge to reduce spills by lapping • float valve resists a pressure of 9 bar • high water flow rate of 34 l/
min at 4 bar • rectangular quick for efficient discharge • mounting plate made of galvanized steel • easy wall
or tube mounting • top or bottom water inlet, 1/2” male
thread • convenient for 40 big cattle
ref. no.
223491
€
1
11
Float Bowl BIGLAC 55T
• double drinking bowls with float valve • 1/2“
water inlet from the back • 30 cm deep bowl made
of high-density PE • with broad edge to reduce
water consumption • easy to mount on water tanks
and barrels • low pressure valve works up to 1 bar
• 2 drain plugs • convenient for 40 big cattle
ref. no.
223495
€
1
12
134
WK462_Haupt_133-143_EN_Rind.indd 134
21.12.2010 9:29:46 Uhr
Water Bowl LA BUVETTE
Pasture Pump AQUAMAT II
• very easy-going pasture pump • provides constantly fresh and clear water
• the animals learn immediately how to pump • pumps water from a depth
of 7 m or length of 70 m • for up to 10-15 animals
ref. no.
description
22421
22422
22423
pasture pump AQUAMAT II
suction basket for 22421
1" connecting piece for 22421
€
1
1/50
1
28
-
Pasture Pump AQUAMAT II MK
• ideal for cow-bonded calf rearing • cow and calf drink at the same time • very easy going
pasture pump • provides constantly fresh and clean water • animals learn immediatelyy
how to pump • pumps the water from a depth of 7 m or length of 70 m • for up to 10-15
0-15
animals
ref. no.
222930
€
1
12
Pasture Well PREBAC round
• dimensionally stable and heavy-duty • made of high-density polyethylene, food-proof material, UV-resistant
• strengthened by ribbed reinforcements • float valve not included • edge to the inside prevents animals
from getting their horns caught at the bowl Practical: • large and fast rectangular draining (90 x 50 mm) for
rapid and efficient cleaning (patented) • easy and stable to stack • easy to move • ground attachment only
available for round bowls • float valve not included!
222742
PREBAC BS 400 litres – Ø 108 x 60 cm
PREBAC BS 600 litres – Ø 130 x 60 cm
PREBAC BS 1000 litres – Ø 160 x 60 cm
PREBAC BS 1500 litres – Ø 200 x 60 cm
222741
ref. no.
description
€
222740
223489
223500
223499
222741
pasture well PREBAC - 400 litres
pasture well PREBAC - 600 litres
pasture well PREBAC - 1000 litres
pasture well PREBAC - 1500 litres
float valve for PREBAC
1
1
1
1
1
8
8
8
8
-
222742
anchorage for PREBAC
1
-
Pasture Well PREBAC oval-shaped
• incl. handles for transport • 2 persons are able to carry and easily
load it on a vehicle • same as PREBAC round • float valve not included
PREBAC 550 litres – Ø 147 x 105 x 60 cm
PREBAC 950 litres – Ø 203 x 115 x 60 cm
ref. no.
description
223512
223513
pasture well PREBAC oval - 550 litres
pasture well PREBAC oval - 950 litres
€
1
1
5
8
Auto-Tanker LACABAC
• for automatic water supply when hanging in troughs or field tanks • made of stainless steel sheet
• resists a water pressure up to 10 bar • 29 l/min. at a water pressure of 5 bar, 24 l/min. at 3 bar,
15 l/min. at 0.5 bar (special low-pressure valve 223488) • adjustable brackets for mounting on
round or angular troughs • 1/2” water inlet • adjustable float level without tools
ref. no.
description
223492
223488
float valve standard pressure, long fitting brackets
float valve low pressure, large fitting brackets
€
1
1
135
135
WK462_Haupt_133-143_EN_Rind.indd 135
21.12.2010 9:29:58 Uhr
Water Bowl SUEVIA
Water Bowl Mod. 115 - SUEVIA
• bowl made of fully enamelled cast iron • adjustment of
water flow rate simply under the nose paddle, no disassembly
and no tools • individually lockable • 1/2” top or bottom
water inlets • flow rate: 14 liter/min at 5 bars
SU1010179
ref. no.
description
22375
SU1010179
SU1020280
water bowl mod. 115
double clamp for Ø 5/4" - 2"
spare valve, complete
€
1
1/10
1
90
-
Water Bowl IDEAL - SUEVIA
• for cattle, calves and horses • mounting with 4 screws • smooth
water inlet, no splashing • enamelled cast iron bowl • low-priced
• 1/2” water inlet
22365
ref. no.
description
22360
22365
22366
water bowl IDEAL
mounting shackles, in pairs
spare valve with spring
€
1
1/25
1
100
-
Plastic Water Bowl SUEVIA 10P
• made of impact resistant plastic Aquathan • brass tube valve • top water
inlet R 1/2” • reinforced stainless steel plate
22365
ref. no.
description
221000
22365
22366
water bowl SUEVIA 10P
mounting shackles, in pairs
spare valve with spring
€
1/10
1/25
1
240
-
Water Bowl SUEVIA 25R
• bowl made of fully enamelled cast iron • brass tube valve with conncection R 1/2” from top or bottom • flow rate to be adjusted (no need to
remove the valve) • 6-point harness • for high and low pressure
SU1010179
ref. no.
description
22378
SU1010179
22366
water bowl SUEVIA 25R
double clamp for Ø 5/4" - 2"
spare valve with spring
€
1
1/10
1
100
-
136
WK462_Haupt_133-143_EN_Rind.indd 136
21.12.2010 9:30:22 Uhr
Water Bowls – Frost-proof
Heatable water bowls: How do they work?
• The heating of drinking water by a water bowl is rather easy! You only need at least one heatable water bowl, a thermostat and a transformer
(running on 24 volts).
• What kind of transformer is sufficient for how many bowls? That’s easy! If you only want to operate one water bowl with 50 watt output, a 50
VA transformer is enough. If you want to connect an additional 24 volts heating cable, you only have to add the power consumption (= wattage)
of the cable and you get the necessary minimum output of the transformer. Be generous in calculating the transformer output in order to leave
optional room for extensions.
ATTENTION: Connection only by a qualifiedelectrician!
Installation of 24 V heatable water
bowls with thermostatic control
Installation of 24 V heatable water bowls without
thermostatic control
1: connection to fault current breaker
2: conduit box 230 volts
3: mains lead max. 10 m, Ø 2.5 mm, humidity
resistant
4: ambient temperature probe
5: thermostat 230 volts, 1200 VA primary connection:
- automatic switch on at about +3°C
- automatic switch off at about + 5°C
6: 230 volts (remove safety plug!)
7: transformer 100 VA – 400 VA, 24 volts
8: 24 volts
9: conduit box 24 volts
10: connection version 1: 24 volts connection directly
at the water bowl
11: water pipe 1/2"
12: connection version 2: heating cable for spur line
24 volts1.5 m, 20 watts
13: heatable water bowl
14: connections for more water bowls
A: push socket 230 volts
B: transformer 24 volts with push
socket, 50 - 400 VA
C: mains lead, Ø 2.5 mm, humidity
resistant
D: heatable water bowl 24 volts
E: bottom water inlet
To guarantee a 100 % frostproof installation of water
bowls we recommend a
combination of connection
version 1 and 2! Neither water bowls nor water pipes
are going to freeze this way!
Water Bowl SUEVIA 41 A
• heatable water bowl made of cast iron with sturdy paddle valve • with enamelled interior • for pedestal mounting • adjustable water flow by changing of the nozzle • frost-protected down to approx. –25°C • power supply
by transformer of minimum 100 watts (not included in delivery) • R 1/2” from bottom • thermic output 80 watts
• can be used up to 6 bars
ref. no.
22353
frost-proof down
to -25°C
€
1
25
Water Bowl SUEVIA 43 A
• heatable water bowl made of cast iron with float valve • with enamelled interior • for pedestal mounting • adjustable water level • frost-protected down to approx. –20°C • power supply by transformer of
minimum 100 watts (in delivery not included) • R 1/2” from bottom • thermic output 80 watts • suitable
for calves, cattle, sheep, goats and horses
ref. no.
22354
frost-proof down
to -20°C
€
1
25
Water Bowl SUEVIA 46
• heatable water bowl with durable tube valve • fully enamelled drinking bowl made of cast iron
• for tube or wall mounting • adjustable water level from outside (no need to remove the valve)
• frost-protected down to about –20°C • power supply by transformer of minimum 100 watts (in
delivery not included) • R 1/2” from top or bottom • thermic output 80 watts
ref. no.
description
22355
22366
SU1010180
water bowl SUEVIA 46
spare valve with spring
Mounting bracket
frost-proof
down to
-20°C
€
1
1
1
66
-
22366
137
137
WK462_Haupt_133-143_EN_Rind.indd 137
21.12.2010 9:30:40 Uhr
Water Bowls – Frost-proof
Water Bowl F 130 EL
• frost-proof down to -20° C by integrated heating element 24 Volt/30 Watt • hygienic and
robust: bowl and valve made of stainless steel (AISI 304) incl. drain plug at the bowl bottom
• high water flow rate up to 20 l/min. • adjustable water flow from outside • mounting with
4 screws • 1/2” T-water inlet from top or bottom • anti-spill edge protects against waste of
water • operated with transformer (not included in delivery)
222696
frost-proof down to -20°C
ref. no.
description
€
222697
water bowl F 130 EL
1
24
222696
mounting plate universal for tube mounting
1/5
-
Heatable Water Bowl STALCHO
• electrically heatable water bowl made of polyethylene with paddle valve • thermic
output 50 watts • runs on 24 Volts • will mount on polyethylene stand (Ref. No.
222715 or 222716) or concrete pipe of 300 mm inside diameter • 1/2” from bottom
by stainless steel braided hose (included in delivery) • control light • for up to 15 big
cattles • operated with transformer (not included in delivery)
frost-proof down to -20°C
ref. no.
22347
€
1
30
Heatable Water Bowl LAKCHO
• electrically heatable water bowl made of polyethylene with float valve • same as 22347
• operated with transformer (not included in delivery) • for up to 15 big cattles
frost-proof down to -20°C
ref. no.
22348
€
1
30
Stand for Water Bowls
222819
• made of high-grade polyethylene (PE) • to screw on or
embed in concrete • suitable for heatable water bowls
STALCHO and LAKCHO
ref. no.
description
222819
222716
222715
to screw on, 30 x 40 cm
to screw on, 30 x 60 cm
to embed in concrete, 30 x 100 cm
222716
€
1
1
1
24
18
12
222715
138
WK462_Haupt_133-143_EN_Rind.indd 138
21.12.2010 9:30:49 Uhr
Water Bowls – Frost-proof
Heatable Water Bowl ISOBAC
• will mount on concrete base • double-walled container • lower part is completely
heat-insulated • two-piece water basin made of polyethylene to accommodate 2
animals • frost-proof down to –20°C • with constant water level: 34 l/min. at 4 bars
• low water level and high flow rate: This is how to prevent organic residue from settling at the bottom of the bowl and bacteria cultures from growing and causing mastitis and diarrhea in calves • discharge at the bottom (sewer) or to the front • ideal for
30 dairy cows • heating 100 watts (2 x 50)/ 24 volts • operated by transformer (not
included in delivery) • with control light • water inlet 1/2” from bottom • dimensions:
96 x 45 x 42 cm (exterior) • weight: 10.5 kg
ref. no.
22343
€
1
8
Tipping Frame
• for 22343 • 1000 x 495 x 276 mm • wall or pedestal
mounting • with lever, mountable at the left or right • delivery incl. braided stainless steel hose • always clear water
• pours away only 20 litres of wate • easy and quick to
drain • better water quality
ref. no.
€
222793
1
THERMOLAC 75
• frost-proof drinker incl. float valve works without electricity • the basic idea of a thermoss
has been applied here in watering technology • the ground water has a temperature from
3 to 5°C. While an animal is drinking the consumed water will be filled up • thanks to the
double walled tank insulated with polyurethane foam, the water temperature in the drinkerr
remains constant (3 to 5°C in winter and 10 to 12°C in summer) • patented discharge system (GV) by larger drains! This allows the drinker to empty quickly and clean the interior byy
hand (brush) • for up to 40 head of cattle or about 60 sheep • dimensions: 99 x 66 x 53 cm
m
ref. no.
22346
€
1
Frost-proof down to minus 30°
0° C
4
THERMOLAC 40
• model with ball to accommodate up to 15 head of big
cattle • dimensions: 66 x 64 x 53 cm • other features
like Thermolac 75
ref. no.
22345
€
1
Comes with large
drain plug Ø 100 mm
Frost-proof down to minus 30° C
7
Stainless Steel Water Trough
• for cattle and horses • stainless steel trough • float valve with R 1/2 inch connection • 2
inch water outlet on the side • Dimensions: w 500 x d 400 x h 290 mm • Capacity 35 litres
Heating included 100 watts, 24 volts
ref. no.
221031
€
frostproof down to -15°C
1
139
139
WK462_Haupt_133-143_EN_Rind.indd 139
21.12.2010 9:31:06 Uhr
Water Bowls – Frost-proof
Tip Trough stainless steel
• incl. heating under the float valve cover, preassembled ready for installation
• shallow water trough made of stainless steel • dimensions: L 1000 - 2000 x D
400 x H 170 mm • rapid cleaning due to tilting mechanism • float valve with R 1/2”
connection • 30 litres/min. flow rate at 3 bars • can be used at up to 6 bars max.
without pressure reducer • water supply possible on the right and left side • wall
bracket and floor stand galvanised • operated with transformer (not included in
delivery)
frostproof
down to -15° C
with heating
with tilting mechanism
ref. no.
description
€
221019
221018
221024
221025
221026
221027
length 1,0 m, wall mounting, until
ntil 30 L, weight 30 kg, heating 100 watts
i h 44 kkg, hheating
i 100 watts
length 1,0 m, floor mounting, untilil 30 LL, weight
length 1,5 m, wall mounting, until 50 L, weight 39 kg, heating 200 watts
length 1,5 m, floor mounting, until 50 L, weight 55 kg, heating 200 watts
length 2,0 m, wall mounting, until 70 L, weight 48 kg, heating 200 watts
length 2,0 m, floor mounting, until 70 L, weight 67 kg, heating 200 watts
1
1
1
1
1
1
1 Water entry
2 Heating unit
3 Water outlet
High-duty
4 High
duty pump
5 Thermostat
6 Safety thermostat
Circulation Pump Aqualine
Antifreeze for drinking troughs
3
Aqualine is an automatic heating system with
integrated circulating pump for troughs which
are connected in a ring circuit. Aqualine reliably
prevents water from freezing in the pipe over a
maximum length of 200 m.
Two modes can be set from the control box (equippped with an ON/OFF switch):
• Green light (ON position): pump operation
• Red light: Heating operation
1
4
Double antifreeze
1. Water in motion cannot freeze
2. Manually operated heating system (adjustable
from 0°C to 40°C)
5
6
• Integral control thermostat • low space require-ment due to compact design • low maintenance
due to high quality materials • simple assembly by
heating or sanitary specialist • connection to light
current (230 volts) – FI 30 mA switch and earthing
required • Including fastening kit for wall mounting
Accessories included:
1 x safety monitoring valve
3 x automatic bleed valves
1 x non return valve
ref. no.
22331
Specimen installation with bypass for
operation without the pump
€
1
2
• The spur lines should be kept frost-free by a heating
cable!
• The location for mounting should be protected from
wind, storms and extreme temperatures
• Make sure the tubing has been insulated sufficiently
(20 mm) and avoid acute angles!
1 – 10 water bowls => 200 m ring main
11 and more water bowls => 150 m ring main
• Heating element 3000 W at 230 V
• Heating thermostat can be set from 0°C to 40°C, factory set to 15°C
• Protection from overheating by safety thermostat (65°C)
• Weight: 9.1 kg
• Circulating pump (protection system IP44) – 3500 l/h
140
WK462_Haupt_133-143_EN_Rind.indd 140
21.12.2010 9:31:22 Uhr
Water Bowls – Frost-proof
Heatable Water Bowl with Tube Valve H10,
enamelled
• drinking bowl made of gray cast iron, black
enamelled • Grey cast bottom tray with black powercoated finish • Water flow rate can be regulated
on the pipe valve • new heating concept with valve
heating to keep clear of frost • Easy to install bowl,
no need to remove the valve for installation • Power
supply via transformer at least 100 W (not supplied)
• Connections at top and bottom G1/2" internal
thread • weigh 11,5 kg • Bowl capacity 3 litres • for
wall and tube mounting
ref. no.
description
222010
222019
Water Bowl H10
Bounting brackets, in pairs
New
• frost-protected down to
about –20° C
€
1
1
-
Transformer
• transforms voltage from 230 V to 24 V
• suitable for all frost-proof water bowls
ref. no.
voltage
222796
222797
222626
222798
100 VA
200 VA
300 VA
400 VA
€
1
1
1
1
Antifreeze Heating Cable
with integrated Thermostat
• keeps your water pipe guaranteed frost-free • installed
thermostats work automatically • approved VDE safety
• do not mount where animals can reach, only use
heating cable of 24 Volt in those spots • do not use on
heating pipes • when insulated additionally please do not
insulate the thermostat • Do not mount where animals
can reach! • IPX7
ref. no.
length
watts at 0°C
22393
22394
22431
22395
22408
22432
22433
22444
22399
2,0 m
4,0 m
8,0 m
12,0 m
14,0 m
18,0 m
24,0 m
37,0 m
49,0 m
33 w
60 w
120 w
176 w
210 w
290 w
360 w
622 w
830 w
• On: At +5°C (+/-3°C)
• Off: At +13°C (+/- 3°C)
• Voltage: 230 volts
€
1
1
1
1
1
1
1
1
1
1 m water pipe 1/2” = 1.10 m heating cable
1 m water pipe 3/4 ” = 1.20 m heating cable
=1.30
1 m water pipe 1” =1
30 m heating cable
Antifreeze Heating Cable with Thermostate
• keeps your water line frost-free to - 45 ° C • approved VDE safety • do not
use on heating pipes • when insulated additionally please do not forget to
insulate the thermostat • Do not mount where animals can reach!
Do not mount in animal feed area - use only
24-volt heating cable.
Do not shorten the heating cable!
max. - 45° C
ref. no.
length
watts at 0°C
223585
223586
223587
223588
223589
2m
4m
8m
12 m
18 m
32 W
64 W
128 W
192 W
288 W
WK462_Haupt_133-143_EN_Rind.indd 141
€
1/16
1/16
1/16
1/16
1/10
141
141
21.12.2010 9:31:33 Uhr
Water Bowls – Frost-proof
Water Bowl with EL 70 Pipe Valve, heatable
• plastic water bowl including a heating rod to screw into the thread opposite the water supply • the heating rod is equipped with an integral thermostat using the latest semi-conductor technology which saves energy and is
maintenance-free • the heating rod warms the water supply pipe. The heat
is conducted through the brass connector pipe to the pivot valve • to heat
the supply pipe, we recommend our 24 volt heating cable in areas that come
into contact with the animals' mouths. Away from these areas, our 230 volt
heating cables with built-in thermostats are recommended. Isolate all heated
pipes to reduce energy loss and protect them from cattle bites. • connected
load: 60 Watt/24 Volts - we recommend using one of our #222796 transformers for each bowl
Reliablee anti-freeze protection of valve and water
ound the bowl up
pipe around
to -10°CC
top and bottom water inlets
ref. no.
description
€
221874
221855
Water bowl with tube valve EL70
spare tube valve
1
1
72
-
22501
mounting shackles and plates, in pairs
1/25
-
Water Bowl with Tube Valve G51, enamelled
with Heating Rod
frost resistant to
temperatures of
-10°C*
• bowl description as for 221851 drinking bowl G51 • the heating rod is equipped
with an integral thermostat using the latest semi-conductor technology which saves
energy and is maintenance-free • the heating rod warms the water supply pipe. The
heat is conducted through the cast iron to the valve and partly to the bowl (limited
frost protection) • to heat the supply pipe, we recommend our 24 volt heating cable
in areas that come into contact with the animals' mouths. Away from these areas, our
230 volt heating cables with built-in thermostats are recommended. Isolate all heated
pipes to reduce energy loss and protect them from cattle bites • connection: 60
watts/24 volts - we recommend to use transformer 222796 for each water bowl
top and bottom water inlets
ref. no.
description
221853
221885
22365
drinking bowl G51 complete with pipe valve and heating element
spare tube valve
mounting shackles, in pairs
€
1
1
1/25
Heating Rod for Drinking Bowls
84
-
Frost resistant
to -15°C
• for screwing into the 1/2" water connection of the drinking bowl • can be fitted
from above and below • the semi-conductor component optimises current input
and power output • with PTC effect: saves energy due to automatic decrease in heat
output as temperature increases. Power take-up limited to what is needed • no need
for special control components (thermostat) • for operation with a transformer for
bowl heating • performance data: 24 V - 60 W • meets DIN EN 60 335 -1 • comes
on at +5°C
ref. no.
description
€
221760
heating rod with 60 cm connecting cable and high-quality metal braided sleeving
protects from wear and reduces damage caused by animal biting
1/400
221761
heating rod with 250 cm connecting cable without metal braided
sleeving
1/400
142
WK462_Haupt_133-143_EN_Rind.indd 142
21.12.2010 9:31:53 Uhr
Frost-Proof Accessories
Antifreeze Valve for Water Bowl
• conical shaped valve box prevents water from remaining inside the valve • fits many water bowls • no water - no freeze
• anti-freeze valve, single for water bowls 221500, 221800 and 222000
• Make sure water tubes stay clean by flushing them now and then. This is to prevent dirt from reaching the valve
• The water bowl has been installed tipping slightly to the front, so that absolutely no water remains in the valve
ref. no.
description
22402
antifreeze valve for water bowls
€
1/150
Heating Cable 24 V
• for heating up the spur pipes of water bowls • IPX7
ref. no.
description
22358
223581
1,5 m, 15 w
3,0 m, 30 w
€
1
1
Antifreeze Thermostat
• suitable for all bowl and tube heating systems • outside probe for automatic
start and shut off • IP 54 • In splashproof housing • Max. permitted power
2500 W
ref. no.
222794
€
1
Aluminium Sticky Tape
• 100 m • 50 mm • to reflect the heat on water pipes • for a 3/4“ pipe of 3.5 m length
approx. 25 m of aluminium tape is necessary
ref. no.
222809
€
Tip: On plastic tubes always use aluminium tape
otherwise there will be no heat conduction
1/54
Brass Extension for Heating Rod
• suitable for heating rods 221760 and 221761 • needed to screw the heating rod for water bowls 22500, 22504
or 221871 into the thread from above • also recommended when using the heating rod in all water bowls made by
other manufacturers • 1/2" inner and outer screw threads
• total length 50 mm - extends the connection to the water supply by 30 mm
ref. no.
221765
€
1/150
143
143
WK462_Haupt_133-143_EN_Rind.indd 143
21.12.2010 9:32:07 Uhr