ficha magnetico

FICHA TÉCNICA
PET STEEL FILM
FF-9002SOL-2T310
Caracteristicas
Innovador rollo de material magnético para impresión digital, este material
consta de una base autoadhesiva y el material magnético, el cual se puede
imprimir en (UV, solvente, Ecosolvente, Mildsolvent y Látex), este material es
resistente al agua, por lo cual se puede usar para campañas al exterior de
media duración.
1. Technical data:
(Tested by AIC procedure)
Product code
（PET material ）
FF-9002SOL-2T310
Total thickness
(mm)
0.18±0.02
Whiteness
（Wb）
≥80
Gloss
（Gs）
≥16
2. The Mechanic Property of PET:
(Tested by AIC procedure)
Item
No.
1
2
3
4
5
6
7
8
Property
Unit
Tensile Strength
Elongation at break
Shrinkage Lengthwise
Crosswise
Density
Melting Point
Whiteness
Light Transmission
Rigidity
MPa
%
%
kg/m3
℃
—
%
cm
40μm∼100μm
≥140
≥60
≤1.5
≤1.0
Results
＞100μm∼190μm
≥130
≥80
≤2.0
≤1.5
1400∼1510
≥254
≥94
4∼50
≥16（188um）
＞190μm ≥110
≥80
≤2.0
≤1.5
≥45（250um）
3. Dimension of PET steel film:
Width available: 1070mm, 1270mm, 1370mm, 1524mm, 1626mm
Length available: 30M or 50M per roll
4. Dimension of Ferrous layer:
Around 0.08mm thickness Ferrous layer ( Pet thickness including coating
0.10mm)
5. Working Temperature:
-26℃ to 70℃
6. Storage:
Please stock the material below 40℃ in clean dry area. The shelf life is 18
months from the delivery date.
7. Durability outside and indoor:
Our material is with the property of waterproof and antirust. So it can be used
widely both on the outside and indoor for POP/Exhibit, outdoor signage and
banner, medium-term promotional. For special outdoor, pls double check the
project. It is easy removal and reusable.
-26℃ to 70℃
FICHA TÉCNICA
PET STEEL FILM
FF-9002SOL-2T310
8. Advice about Use:
To obtain the optimum attraction, the magnetic board surface must be clean,
dry and well unified. 0.5mm isotropic/0.7mm isotropic flexible magnetic sheeting(large size graphic) with adhesive to make back board is recommended.
Printing advice:
This item can be used for UV printing and inkjet printing. The inks applicable
are UV curable ink, Solvent &Eco-Solvent ink.
Printer recommended for this item:
Agfa Gaphics Grand Sherpa
HP＠ DesignJet 8000s/9000s/10000s
HP Scitex＠XLJet 1500/1200
HP Scitex＠Grandjet
HP Scitex＠TurboJet 8300
Mimaki＠JV3-75SP/130SP/160SP/250SP
Mimaki＠JV33-130/160
Mimaki＠JV5-130S/160S
Mutoh＠Falcon Outdoor/Outdoor Junior/Outdoor II
Mutoh＠Toucan LT
Mutoh＠ValueJet 64/100/1204/1604/2606
Mutoh＠Spitfire 65/90 PJ-1946/3346
Nur＠Salsa
Nur＠Fresco
Nur＠Blueborad
Roland＠Versacamm Sp-300V/540V,VP-300/VP-540
Roland＠SOLJET Pro III XC-540
Roland＠SOLJET Pro-545/645/745/1045 EX
Roland＠ADVANCED JET AJ-1000
Vutek＠150/3360/5330
Vutek＠UltraVU 2360/2600
Vutek＠UltraVU ii 3360
9. GSM(g/M2) is 310g/M2
10. Surface Finish: Semi-Gloss (waterproof ), AntirustS