Data sheet Hand stamping tools - Borries Markier
Transcription
Data sheet Hand stamping tools - Borries Markier
® Pos: 1 /Vertrie b/Techn isc he Date nblät ter/Konvent ionel le Präge techn ik/Hands tempelge räte/1 _Übersch rift @ 1\mod_ 140 8709 346 907 _514. docx @ 2 160 1 @ 12 @ 1 Hand stamping tools Technical data sheet • • • Pneumatic (respectively BM 8 manual) operated hand stamping tools To initiate the punch the unit has to be pressed on the workpiece with only less force The marking power of these blow-back proofed units is infinitely variable Pin stamp as an example of a marking tool Hand stamping tool BM 8 (not pneumatic) Hand stamping tool BM 22 Hand stamping tool BM 10 with type holder as an example Hand stamping tool BM 25 with numbering head as an example No original sizes/ proportions Pos: 2 /Vertrie b/Techn isc he Date nblät ter/Konvent ionel le Präge techn ik/Hands tempelge räte/2 _Ein satzberei ch @ 1\mod_1 4087 097 863 73_5 14.do cx @ 21 598 @ 3 @ 1 Application area BORRIES hand stamping tools are especially used for control stamping, numbering or as a center punch. They are usable as hand held tools or integrated units. These units are easy to use for flexible applications and the stamping inserts are quickly and easy changeable. These features make it to an indispensable tool for craft and industry. Pos: 3 /Vertrie b/Sei tenumb ru ch Ho ch @ 1\mod _14 089 4867 840 9_0.do cx @ 1 7345 @ @ 1 Borries Markier-Systeme GmbH Siemensstraße 3 72124 Pliezhausen/ Germany Telefon +49/ (0)7127/ 9797-0 Fax +49/ (0)7127/ 9797-97 [email protected] • www.borries.com Dokument_1427287592 Date: 25.03.2015 Page 1 of 2 ® Pos: 4 /Vertrie b/Techn isc he Date nblät ter/Konvent ionel le Präge techn ik/Hands tempelge räte/3 _Op tionen @ 1\mod_ 140 871 0134 430 _514 .docx @ 2159 5 @ 3 @ 1 Options Control-Symbols Following different tools are available: • Type holders with steel types • Center punch • Pin stamp • Numbering head MNPW (only for BM 22 and BM 25) Pos: 5 /Vertrie b/Techn isc he Date nblät ter/Konvent ionel le Präge techn ik/Hands tempelge räte/4 _Tech nis che Date n @ 1\mod _14 0871 038 1065 _51 4.docx @ 215 92 @ 3 @ 1 Technical data BM 8 BM 10 BM 22 BM 25 Length ca. 150 mm 260 mm 300 mm 350 mm Weight ca. 150 g 520 g 980 g 1660 g Tool fitting* 8 mm 8 mm 10 mm 10 mm (collet) Marking power ca. 6 kN 10 kN 20 kN 35 kN Max. number of characters** Alu / St37 Alu St37 Alu St37 Alu St37 character height 1 mm 3 5 3 6 4 8 7 character height 2 mm 3 5 3 6 4 8 6 character height 3 mm 2 4 2 5 3 7 5 character height 4 mm - 3 1 4 2 6 4 character height 5 mm - 1 - 3 1 6 3 * Stamps cannot be interchanged between the different hand stamping tools. ** These information are rough standard values. Exact information can only be made after a sample marking with an original workpiece. BM 8 BM 10 BM 22 BM25 Without and with safety valve Without and with safety valve Also available with rotation lock Also available with rotation lock No original size / proportions Pos: 6 /Vertrie b/Techn isc he Änderungen @ 2\mod_1 426 838 1598 45_ 514.d ocx @ 2 7142 @ @ 1 Technical details are subject to change. === Ende der Liste fü r Textma rke In halt === Borries Markier-Systeme GmbH Siemensstraße 3 72124 Pliezhausen/ Germany Telefon +49/ (0)7127/ 9797-0 Fax +49/ (0)7127/ 9797-97 [email protected] • www.borries.com Dokument_1427287592 Date: 25.03.2015 Page 2 of 2