Worksoft Certify Execution Suite Installation Guide

Transcription

Worksoft Certify ® Execution Suite
Installation Guide
Worksoft, Inc. · 15851 Dallas Parkway, Suite 855 · Addison, TX 75001
www.worksoft.com · 866-836-1773
Version 9.2
© Copyright 2015 by Worksoft, Inc. All rights reserved.
Worksoft is a business name of Worksoft, Inc. Information in this document is subject to change and revision
without notice. No part of this manual may be reproduced by any means, electronic or mechanical, for any
purpose other than the purchaser’s personal use, without prior written permission from Worksoft.
Worksoft provides this documentation “as is” without warranty of any kind, either express or implied. Worksoft
may revise information in this document without notice and does not represent a commitment on the part of
Worksoft, Inc.
Worksoft, Inc. may have patents or pending patent applications covering subject matter in this document. The
furnishing of this document does not give you any license to these patents except as expressly provided in any
written license agreement from Worksoft, Inc.
Patent
Worksoft Certify®
U.S. Patent No. 7,600,220
Trademarks
Worksoft Certify® is a registered trademark of Worksoft, Inc.
All other trademarks and trade names mentioned in this guide are the property of their respective owners.
PN WESIG 92 060515
Table of Contents
Chapter 1 Preparing to Install the Worksoft Certify Execution Suite . . . . . . . . . . . . . . . 5
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Web Application Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Certify Execution Suite Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Database Server Requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Microsoft .NET System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Upgrading Worksoft Execution Suite v9.0.2 to v9.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Retrieving Current Database Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Updating Your Execution Suite Databases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Uninstalling Worksoft Execution Suite and Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Installing Worksoft Application Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Chapter 2 Configuring Your Application Web Server . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Configuring Your Application Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Adding Roles and Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Configuring the Web Server Role (IIS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Enabling IIS Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Chapter 3 Creating Worksoft Certify Execution Suite Databases . . . . . . . . . . . . . . . . . 21
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Creating the Worksoft Management Studio Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Creating or Updating a Certify Execution Manager Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Creating or Updating a Certify Impact Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Updating Your Worksoft Certify Databases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Chapter 4 Installing Worksoft Application Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Installing Worksoft Application Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3
Chapter 5 Configuring the Worksoft Management Studio . . . . . . . . . . . . . . . . . . . . . . 30
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Accessing Worksoft Management Studio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Configuring Worksoft Management Studio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Registering SAP Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Registering Certify Execution Suite Databases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Registering Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Configuring Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Chapter 6 Installing Remote Certify Execution Manager Agents . . . . . . . . . . . . . . . . . 42
Installing Remote Execution Agents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Configuring Windows 8 Clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Chapter 7 Accessing Worksoft Certify Execution Suite . . . . . . . . . . . . . . . . . . . . . . . . . 47
Accessing Certify Execution Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Accessing Certify Impact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Appendix A Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
4
Chapter 1
Preparing to Install the Worksoft Certify
Execution Suite
In This Chapter
Overview .............................................................................................................................. 6
System Requirements ............................................................................................................ 6
Microsoft .NET System Requirements ...................................................................................... 8
Upgrading Worksoft Execution Suite v9.0.2 to v9.2 .................................................................. 9
5
Overview
Overview
The Worksoft Certify® Execution Suite consists of the following two applications:

Certify Execution Manager™ - Schedules and manages the remote execution of Worksoft Certify®
processes.

Certify Impact™ - Provides you with the ability to quickly deploy changes to your SAP® systems by
identifying and executing a minimal set of Worksoft Certify processes for impacted programs and
transactions.
This guide contains information on how to install and configure the Worksoft Certify Execution Suite from start
to finish.
System Requirements
Before you begin to install the Certify Execution Suite, verify that your systems meet the following system
requirements. The Certify Execution Suite supports Worksoft Certify v8.7 or a later version.
Web Application Server
Minimum System Requirements
Component
Requirement
Supported Operating System
Windows® Server 2008 R2
or
CPU
Intel® Pentium® Processor or Advanced Micro Devices (AMD)
Athlon® dual-core processor 2.0 GHz or greater
RAM
4 GB
Storage
50 GB minimum disk space
Software
• Microsoft® Internet Information Services (IIS) v8.5
• Microsoft® ASP.NET v4.0
• Microsoft® .NET Framework v2.0
• Worksoft Management Studio™
• Microsoft® Internet Explorer® v9 or a later versions
6
Certify Execution Suite Client
Recommended System Requirements
Component
Requirement
Supported Operating System
or
CPU
Intel Pentium Processor or AMD Athlon dual-core processor
3.0 GHz or greater
RAM
8 GB
Storage
Software
• Microsoft® Internet Information Services (IIS) v8.5
• Microsoft® ASP.NET v4.0
• Worksoft Management Studio™
• Microsoft® Internet Explorer® v9 or a later versions
Certify Execution Suite Client
Minimum System Requirements
Component
Requirement
Supported Operating
System
Windows® 7
or
Windows® 8
If using Windows 8, see “Configuring Windows 8 Clients” on page 46.
CPU
1.6 GHz or greater
RAM
1 GB
Storage
Software
• Microsoft® Internet Explorer® v9.0 with Active Scripting enabled
• Worksoft Certify v9.0.1 or later versions
7
Database Server Requirement
Recommended System Requirements
Component
Requirement
Supported Operating
System
Windows® 7
or
Windows® 8
If using Windows 8, see “Configuring Windows 8 Clients” on page 46.
CPU
3 GHz or greater
RAM
2 GB
Storage
Software
• Microsoft® Internet Explorer® v9.0 with Active Scripting enabled
• Worksoft Certify v9.0.1 or later versions
Database Server Requirement
Certify Execution Suite supports the following database servers:

Microsoft® SQL Server 2012

Microsoft® SQL Server 2014
Microsoft .NET System Requirements
You need to ensure that the web server in which you install Worksoft products has all the features required for
optimum performance.
Multiple Microsoft .NET Framework versions must be installed on the web server in order for all of the Worksoft
product features to be enabled. These following versions are required:

Microsoft .NET v2.0

Microsoft .NET v3.5

Microsoft .NET v4.0

Microsoft .NET v4.5
Depending on if you have a 32-bit or 64-bit operating system, you will need the correct version for each
Microsoft .NET version installed.
8
Upgrading Worksoft Execution Suite v9.0.2 to v9.2
Upgrading Worksoft Execution Suite v9.0.2 to v9.2
To upgrade your Worksoft Execution Suite v9.2, you will need to do the following:

Retrieve your current database information

Update your databases

Uninstall your current Worksoft Execution Suite and services

Install Worksoft Application Server
In the Worksoft Execution Suite v9.2 version, the new Worksoft Application Server installs Worksoft
Management Studio that replaces the Worksoft Certify Connect™ tool. The Worksoft Management Studio tool
registers database settings, data sources, and SAP systems that you intend to use for Worksoft products. You
will convert your Certify Connect database to a Management Studio database.
Retrieving Current Database Information
You will need to retrieve your current database information in order to upgrade your databases.
 To retrieve current database information:
1
To retrieve Certify Impact database information, go to the server where Certify Impact is installed. Open
the web.config file in the following directory:
C:\Program Files (x86)\Worksoft\Impact
2
Make a note of the Certify Impact database server, database name, and login information in the
Database Connection Strings section of the web.config file.
3
To retrieve Certify Execution Manager database information, go to the server where Certify Execution
Manager is installed. Open the web.config file in the following directory:
C:\Program Files (x86)\Worksoft\ExecutionManager\WebApplication
4
Make a note of the Certify Execution Manager database server, database name, and login information in
the Database Connection Strings section of the web.config file.
5
To retrieve Connect database information, open either the Certify Impact or Certify Execution Manager
web.config file to find the Connect database server, database name, and login information in the
Connect Database Connection Strings section.
Updating Your Execution Suite Databases
Do not delete your Certify Connect database. You will convert the Connect database into a Worksoft
Management Studio database by using the Apply.exe tool from the ManagementStudio folder within the
distribution package.
To update your Connect database, follow the instructions in Chapter 3 “Creating the Worksoft Management
Studio Database.” You will use the Connect database information that you retrieved from the web.config file.
To update your Certify Impact and Certify Execution Manager, also follow the instructions in Chapter 3
“Creating Worksoft Certify Execution Suite Databases.”
9
Uninstalling Worksoft Execution Suite and Services
Uninstalling Worksoft Execution Suite and Services
If you have the Worksoft Execution Suite, uninstall the suite. If you have installed Certify Impact and Certify
Execution Manager separately, uninstall both products.
If you have integrated IBM® Rational® Quality Manager with Worksoft Certify®, then do not uninstall the
following services. This integration still requires these services. You are able to have the new Worksoft
Management Studio installed with Certify Connect.
If you do not have RQM integrated with Certify, uninstall the following services:

Certify Connect Windows service

Certify Connect web service

Certify Compliance
Installing Worksoft Application Server
After you have updated your databases and uninstalled your previous version, you will need to install the
Worksoft Application Server. For information on how to install the server, see Chapter 4 “Installing Worksoft
Application Server.”
10
Chapter 2
Configuring Your Application Web
Server
In This Chapter
Configuring Your Application Server ...................................................................................... 12
Enabling IIS Services ........................................................................................................... 20
Worksoft Certify Connect Installation Guide
11
Configuring Your Application Server
Configuring Your Application Server
In order to transform your application server into a web server, Microsoft® Internet Information Services (IIS)
must be installed in order to host Worksoft Web services and Worksoft web applications. After you have
installed IIS, you will need to configure the Server Manager.
This chapter will guide you to configuring the minimum requirements for Worksoft products. You may need
assistance from your IT administrator.
Adding Roles and Features
The Server Manager allows you to add specific roles and features to your web server that are required for
Worksoft products.
 To add roles and features to your web server:
1
From the Start menu, select Administrative Tools > Server Manager.
The Server Manager opens.
2
In the Navigation pane, select Dashboard.
3
In the Summary Tasks pane, select Add Roles and Features.
The Add Roles Wizard opens.
4
12
Click Next.
The Select Installation Type page appears.
5
Select the Role-based or feature-based installation option.
6
Click Next.
13
The Select Server Roles page appears.
7
8
From the Server Roles list, select the following roles:
•
File Services
•
Web Server (IIS)
Click Next.
After you have added the roles to the web server, you will add features to the web server.
14
A dialog box appears asking if you want to add features to the web server.
9
In the Add Features dialog box, select the Include Management Tools (if applicable) option.
10
Click Add Features.
The Select Features page appears.
15
11
Select the .NET Framework 3.5.1 Features (Installed) and all of its child nodes.
12
Select the WCF Services (Installed) and all of its child nodes.
13
Use the scroll bar and select the next features to add:
•
Remote Server Administration Tools (Installed)
•
Child node Role Administration Tools (Installed)
•
Child node Web Server (IIS) Tools (Installed)
You may receive a message that states the following:
To install Active Directory Rights Management Services Tools, this server must be joined to a domain.
Before you can continue, you must join this server to a domain. Cancel this wizard and join the server to
a domain. Then, run this wizard again.
If you do receive this message, cancel the wizard and join the wizard to the domain.
16
14
Use the scroll bar and select the Windows Process Activation Service and all of its child nodes.
15
Click Next.
The Web Server Role (IIS) page appears.
17
Configuring the Web Server Role (IIS)
After you have added your roles and features, you will now need to configure the Web Server role (IIS) in the
Server Manager.
1
Click Next on the Web Server Role (IIS) screen.
The Select Role Services page appears.
2
In the Role Services list, select the following services. You will need to use the scroll bar to select all of
the services.
Node
Child Nodes
Common HTTP Features
Default Document
Directory Browsing
HTTP Errors
Static Content
Health and Diagnostics
HTTP Logging
Request Monitor
18
Node
Child Nodes
Application Development
ASP.NET 3.5
ASP.NET 4.5
.NET Extensibility 3.5
.NET Extensibility 4.5
ASP
CGI
ISAPI Extensions
ISAPI Filters
Security
Request Filtering
Performance
Static Content Compression
Management Tools
IIS Management Console
Management Service
IIS 6 Management Compatibility and all of its child
nodes
3
Click Next.
The Confirm Installation Selections page appears.
4
Click Install to install the role services.
19
Enabling IIS Services
Enabling IIS Services
You will now need to verify that several IIS services are enabled.
 To verify IIS services are enabled:
1
If the Server Manager is not open, select Administrative Tools > Server Manager from the Start
menu
The Server Manager opens.
2
In the Navigation pane, select IIS.
3
In the right Services pane, verify that the following services are enabled and running:
4
•
Application Host Helper Service
•
IIS Admin Service
•
Windows Process Activation Service
•
World Wide Web Publishing Service
If any of these window services are not running, you will need to start these services.
To start a service, select the service from the list and click Start in the right menu. You are also able to
start your services by going to Administrative Tools > Services on your machine.
20
Chapter 3
Creating Worksoft Certify Execution
Suite Databases
In This Chapter
Overview ............................................................................................................................ 22
Creating the Worksoft Management Studio Database ............................................................. 22
Creating or Updating a Certify Execution Manager Database ................................................... 23
Creating or Updating a Certify Impact Database..................................................................... 24
Updating Your Worksoft Certify Databases............................................................................. 25
21
Overview
Overview
After you have configured your IIS server you will need to create your databases.
The following databases are required for the Worksoft Certify Execution Suite:

Worksoft Management Studio™ database

Execution Manager database

Certify Impact database

Worksoft Certify database
This chapter provides the information on how to create and upgrade these databases.
Creating the Worksoft Management Studio Database
The Worksoft Management Studio tool registers database settings, data sources, and SAP systems that you
intend to use for Worksoft products. The Management Studio database maintains configuration information
used by applications and services. Only one Management Studio database is needed regardless of how many
Certify databases already exist.
Worksoft Management Studio replaces the Worksoft Certify Connect™ tool. Use the following procedure to
convert your Certify Connect database to a Management Studio database.
 To create a Worksoft Management Studio database:
1
Locate the Apply.exe utility within your Worksoft Certify Execution Suite distribution package:
...\Databases\ManagementStudio
2
Double-click Apply.exe.
The Apply utility opens.
22
Creating or Updating a Certify Execution Manager Database
3
In the Apply tool’s text fields, type in the following database connection information:
•
Database server name
•
Database name
4
Do not select the Windows Authentication option. Worksoft Certify Execution Suite does not support
Windows authentication.
5
For SQL server authentication, type the user name and password in the text fields.
6
Click Start.
The Apply utility begins to create your new database.
If the database created successfully, then a message appears.
7
Click OK.
Creating or Updating a Certify Execution Manager Database
You need to create your database for Execution Manager before you install the Certify Execution Suite. If you
have an existing Execution Manager database, follow the instructions in this procedure to update it.
 To create an Execution Manager database:
1
Locate the Apply.exe utility within your Worksoft Certify Execution Suite distribution package:
...\Databases\ExecutionServer
2
23
Creating or Updating a Certify Impact Database
3
•
•
Database name
4
5
6
Click Start.
The Apply utility begins to create your new database.
7
Click OK.
Creating or Updating a Certify Impact Database
You need to create your database for Certify Impact before you install the Certify Execution Suite. If you have
an existing Certify Impact database, follow the instructions in this procedure to update it.
 To create a Certify Impact database:
1
Locate the Apply.exe utility within your Certify Execution Suite distribution package:
...\Databases\Impact
2
24
Updating Your Worksoft Certify Databases
3
•
•
Database name
4
5
6
Click Start.
The Apply utility begins to create your new Certify Impact database.
7
Click OK.
Updating Your Worksoft Certify Databases
Not only will you need to create Certify Execution Suite databases, but you will need to update your Worksoft
Certify database
The Certify Execution Suite adds custom functionality to your existing Worksoft Certify databases. You will
need to update all of the Certify databases that you intend to use with the Certify Execution Suite.
 To update your Worksoft Certify database:
1
Locate the Apply.exe utility within your Certify Execution Suite distribution package:
...\Databases\Certify
2
3
•
•
Database name
4
5
6
Click Start.
The Apply utility begins to update your Certify database.
If the database updated successfully, then a message appears.
7
Click OK.
Be sure to note your database connection strings that you created for all of your databases that you intend to
use. You will need this information when you register your databases in the Worksoft Management Studio.
25
Chapter 4
In This Chapter
Installing Worksoft Application Server ................................................................................... 27
26
After you have created your databases, you are now ready to install the Worksoft Application Server on your
web server. The Worksoft Application Server installs the Worksoft Management Studio. The Management
Studio tool registers database settings, data sources, and SAP systems that you intend to use for Worksoft
products.
The domain user name is required for installation. The domain user must be an administrator of the machine
in order to install the Worksoft Application Server.
 To install the Worksoft Application Server:
1
In your software distribution folder, double-click the WorksoftApplicationServer.exe file.
The Worksoft Application Server Wizard opens.
2
Click Next to begin the installation process.
27
After your system has been analyzed, the Destination page appears.
3
If you want to accept the default directory for your installation files, click Next.
If you do not want to accept the default directory for the installation files, click the Change button to
select a different installation directory for the Certify client, and then click Next.
The Worksoft Application Server page appears.
28
4
If you want to accept Default Web Site as your website, click Next.
If you have other websites configured in the IIS, select the server from the drop-down list and click
Next.
The Starting Installation page appears.
5
Click Next.
Then the installation completes, the Completed Installation page appears.
6
Click Finish.
29
Chapter 5
Configuring the Worksoft Management
Studio
In This Chapter
Overview ............................................................................................................................ 31
Configuring Worksoft Management Studio ............................................................................. 32
Registering SAP Systems ...................................................................................................... 33
Registering Certify Execution Suite Databases........................................................................ 35
Registering Users................................................................................................................. 38
Configuring Services ............................................................................................................ 40
30
Overview
Overview
You will use the Worksoft Management Studio to do the following:

Configure Management Studio

Register all SAP systems

Register all Worksoft Certify and Worksoft Certify Execution Suite databases

Specify product users

Configure services
Certify Execution Manager and Certify Impact leverage information from the Worksoft Management Studio.
Accessing Worksoft Management Studio
To access the Worksoft Management Studio, navigate to the following URL address on a web browser:
http://<server>/ManagementStudio
If you did not use the default website during installation, your URL address will be different. If you have any
questions about your specific URL address, please ask your IT administrator.
31
Configuring Worksoft Management Studio
Configuring Worksoft Management Studio
After the initial install of Worksoft Management Studio, you will need to configure the product in the
Configuration tab to collect information from your Management Studio database.
 To configure the Worksoft Management Studio:
1
Open the Worksoft Management Studio and the Configuration tab opens.
2
In the SQL Server field, type in the server name.
3
In the Database Name field, type in the name of the Management Studio database.
4
For SQL Database Authentication, type the SQL user name and password in the fields to access the
database server.
5
Click the Test button to test your connection.
If the test fails, you will need to troubleshoot the database connection.
The Certify Execution Manager and Certify Impact sends out email notifications when a report is created. You
will need to specify the SMTP server that will send out the email notifications.
6
7
8
In the SMTP respective fields, type in the following information:
•
From Email Address
•
SMTP Host
•
SMTP Port
•
SMTP User Name
•
SMTP Password
If you want to use a SSL certificate, select the SSL option.
Click the Test button to test your connection.
If the test fails, you will need to troubleshoot the connection.
If the settings are not valid, the Certify Execution Suite will still be functional; however, the size of your
log file will be affected since the products will log errors for all of the failed email notifications.
9
In the Management Studio URL field, type in the Worksoft Management Studio URL address.
10
Click Save.
After saving the Management Studio configuration, you will be prompted to log on to the Management
Studio.
11
In the User Name field, type admin.
12
In the Password field, type password.
13
Click Login.
After you have logged on to Worksoft Management Studio, other tabs are now enabled.
32
Registering SAP Systems
All of the SAP systems that you want to access with the Certify Execution Suite must be registered within the
Worksoft Management Studio. In order to register your SAP systems, you will need your SAP system
connection information and service account user information that includes a user name and password.
 To register your SAP systems:
1
Click the SAP Systems tab.
The SAP Systems tab opens.
2
In the left pane, click New.
3
In the Details pane, type in a unique name of your SAP system in the Alias field.
Each SAP system can be registered using an alias name. A unique alias name is helpful in distinguishing
between your various SAP systems.
33
4
If you want to use typical SAP connection details, select the Typical SAP Connection Details option.
If you want to use custom SAP connection details, select the Custom SAP Connection Details option.
Go to Step 6.
5
6
If you selected Typical SAP Connection Details, enter values in the following fields:
•
Application Server Host
•
System Number
•
SAP Client
•
SAP User
•
SAP Password
If you selected the custom SAP Connection Details option, type in a custom string in the Complete SAP
Connection String field.
Example: TYPE=3; ASHOST=SAPApplicationServerHost; SYSNR=SysNo;
CLIENT=ClientNo; LANG=EN; USER=username; PASSWD=password;
7
Click the Test button to test the connection.
If the connection was successful, a Passed message appears.
8
Click Save to save your SAP system.
When you save your SAP system, this system appears in the left SAP Systems pane.
9
34
If you need to add another SAP system, repeat this process.
Registering Certify Execution Suite Databases
Databases that should be registered in Worksoft Management Studio include the following:

Worksoft Certify databases

Certify Execution Manager database

Certify Impact database
 To register Worksoft Certify databases:
1
In the Worksoft Management Studio, click the Products tab.
2
Click the Certify tab.
The Certify tab opens.
3
In the left Certify pane, click New.
4
Optional: In the Details pane, type in a unique name of your Certify database in the Alias Name field.
5
In the SQL Server field, type in the name of your SQL server.
6
In the Database Name field, type in the name for your database.
7
In the SQL User field, type in the SQL server user name.
8
In the SQL Password field, type in the SQL server password.
35
9
10
Click Save to save your registered Certify database.
When you save your Certify database, this database appears in the left Certify Databases pane.
11
If you need to add another Certify database, repeat this process.
 To register a Certify Execution Manager database:
1
2
Click the Execution Manager tab.
The Execution Manager tab opens.
3
4
5
6
7
8
If you do not want to have completed notifications sent out, select the Disable Individual Task
Completed Notification option.
9
Click Save to save your registered Certify Execution Manager database.
36
 To register a Certify Impact database:
1
2
Click the Impact tab.
The Certify Impact tab opens.
3
4
5
6
7
8
Optional: If you would like to use an Analysis Engine, select the Worksoft or BPCA option.
If you choose to use the SAP Business Process Change Analyzer (BPCA) analysis type, one of your
SAP systems registered with Worksoft Management Studio must be hosting SAP® Solution Manager
37
Registering Users
9
For test execution integration with Certify Impact, select either the Worksoft Execution Manager or
HP Quality Center option.
10
If you want to import SAP ST03 data into Certify Impact to help you identify which processes should be
executed because of an application change, type in the folder path where the ST03 data would be
stored. The default value is C:\Worksoft\st03data.
11
12
Click Save to save your registered Certify Impact database.
Registering Users
The next step to configuring Worksoft Management Studio is to register users who will be using the Worksoft
Execution Suite.
There are two ways to register users:

Import users from a Microsoft Excel® spreadsheet

Manually create users in Worksoft Management Studio
 To register users by importing from a Microsoft Excel spreadsheet:
1
In the Worksoft Management Studio, click the Users tab.
The Users tab opens.
38
Registering Users
2
To download an Excel template, click Download Sample Upload File.
Use this template to create your own Excel spreadsheet.
3
After you have created your users file, click the Import button in the left Users pane.
The Choose File to Upload dialog box appears.
4
Browse to your file and click Open.
The users are imported into the Worksoft Management Studio and appear in the Users pane.
 To manually create users in Worksoft Management Studio:
1
In the Worksoft Management Studio, click the Users tab.
The Users tab opens.
2
In the left Users pane, click New.
3
In the right Details pane, enter the following information:
•
First name
•
Last name
•
User name
•
Email address
•
Password
4
If you want to give the user administrative rights, select the Administrator option.
5
If you want to require Worksoft authentication, select the Worksoft Authentication option.
6
Select which role you want to designate for the user:
7
•
Execution Manager
•
Management Studio
Click Save to save the user.
The user name appears in the left Users pane.
8
Repeat this process to add more users.
 To delete a user:
To delete a user, click on the user in the left Users pane and click Delete.
39
Configuring Services
The Worksoft Management Studio allows you to configure if you want LDAP authentication or Worksoft
authentication.
 To configure authentication:
1
In the Worksoft Management Studio, click the Services tab.
The Services tab opens.
2
40
In the Details pane, select one of the following options:
•
LDAP Authentication
•
Worksoft Authentication
3
If you selected LDAP Authentication, enter the following information:
•
LDAP server path
Examples: LDAP://<server> or LDAP://<server>:<port>
•
LDAP domain
Example: worksoft.com
4
Click Save.
You have completed configuring Worksoft Management Studio.
41
Chapter 6
Installing Remote Certify Execution
Manager Agents
In This Chapter
Installing Remote Execution Agents ...................................................................................... 43
Configuring Windows 8 Clients ............................................................................................. 46
42
Installing Remote Execution Agents
In order to user the Worksoft Certify Execution Manager, you will need to install a Certify Remote Execution
Agent on each dedicated machine allocated for remote execution. The Certify Execution Suite Server
communicates with the Agents and sends requests to start executing processes and projects.
In order for the Server to communicate with the Agents, port 4242 must be open.
When installing the Execution Agent, you must have full Administrator rights to the Execution Agent machine.
If you create a Service user for running the Execution Agent in lights-out mode, the Service user must have full
Administrator rights to the machine in order to start the Execution Agent as an Administrator.
 To install a Certify Remote Execution Agent:
1
In your software distribution folder, double-click the Remote Execution Agent.exe file.
The Certify Remote Execution Agent installer opens.
2
Click Next.
43
The Analyzing Your System screen appears.
When the system analysis has completed, the Destination Folder page appears.
3
If you want to accept the default directory for your installation files, click Next.
If you do not want to accept the default directory for the installation files, click the Change button to
select a different installation directory for the Certify client, and then click Next.
44
The Settings page appears.
4
In the Certify Folder Path field, type the full path name to Certify.
5
Click Next.
The Completing the Certify Remote Execution Agent Installation page appears.
6
Click Finish.
45
Configuring Windows 8 Clients
Certify Remote Execution Agent installation is complete. Repeat this installation process for all of the client
machines that you intend to use with the Execution Manager Server.
The Certify Remote Execution Agent opens and starts running on your client machine. To stop the Agent, click
the Stop button.
The Certify Remote Execution Agent must be running in order for the Execution Manager Server to connect
with the machine that will be executing Certify processes.
To start the Agent, you must run the Agent as an administrator. From the client machine, select Start >
Worksoft Execution Manager Agent > Run As Administrator. The Execution Manager Agent opens and
begins running.
Configuring Windows 8 Clients
The machine where Certify Execution Manager agent is installed needs to be able to respond to pings from the
web server. By default, Windows 8 machines do not allow echo replies because Correct, File, and Print Sharing
is turned off.
You will need to go to the Inbound Rules section in the Advanced Firewall Settings. Enable the rule for ICMPv4
echo requests so the machine can respond to ping requests. For detailed information, see this article.
46
Chapter 7
Accessing Worksoft Certify Execution
Suite
In This Chapter
Accessing Certify Execution Manager..................................................................................... 48
Accessing Certify Impact ...................................................................................................... 48
47
Accessing Certify Execution Manager
Accessing Certify Execution Manager
The URL address for Certify Execution Manager is http://<server>/ExecutionManager/.
Accessing Certify Impact
The URL address for Certify Impact is http://<server>/Impact/.
48
Appendix A
Troubleshooting
If you have trouble installing the Worksoft Certify Execution Suite, go to the Worksoft Community site to
view solutions to issues that you may have encountered with the installation. In order to utilize the Worksoft
Community site, you will need to register on this site: http://community.worksoft.com/.
Before contacting Worksoft Support, use the Worksoft Diagnostics tool that is located in the Tools folder of
the installation package. When you run the Worksoft Diagnostics tool on your web server, this tool generates
a diagnostic results file.
 To create a diagnostic results file with the Worksoft Diagnostics tool:
1
In the Tools folder of the installation directory, copy the worksoftdiagnostics.exe file to your
web server.
2
Right-click on the worksoftdiagnostics.exe file and select Run as Administrator.
3
Click the Start button.
The process will take several minutes. The WorksoftDiagnostic_<machine name>.html file opens
in the default browser on the machine.
4
Review the diagnostic results file and follow the instructions listed in the file.
5
After you have completed the tasks listed in the file, rerun the tool again if you are still having trouble
with installation.
6
If needed, send the last results file to Worksoft Support.
49

Worksoft Certify Execution Suite Installation Guide

Transcription

Similar documents

Neat Document-Thumbsuckers Calendar

Please complete the online application at DreamfieldsFoods.com

How Reliant Energy Reduced Costs and Increased

Specialist provider of Application Services Mobile Apps Development

KBA-Grafitec s.r.o.

Assessment item cover sheet

Certificate of Complaince - 1.2 - 20110630.rtf

Document 6527557

Form 19 - Social Security Commission Namibia

21st Annual Cape Cod Synchronized Skating Classic: Sanction