- DC Sports

Transcription

- DC Sports

OFFICIAL
PRODUCT GUIDE
WWW.DCSPORTS.COM
DC Sports was founded by Darrell and Derrick Contreras as a high quality designer and manufacturer of performance products to address
the developing Sport Compact Market.
In 1987, American Honda commissioned DC Sports to develop a header for their SCCA prepped CRX’s and the result cumulated was our
first 4 into 1 header design. It was so well received that Honda requested headers for other applications. That system is the one that
started it all (HHC5002)
The Sport Compact Market was primarily based on popular Japanese small cars that were great cars to begin with, but also excellent
platforms for various tuning modifications.
Throughout the 1990s, DC Sports was synonymous with Honda and Acura performance and in
the early 2000’s started expanding into other sport compact platforms. DC Sports developed
unique designs that performed better and therefore became the brand of choice for serious
enthusiasts.
DC Sports offers products for most popular sport compact vehicles. Our headers and intakes
are available as CARB approved-50 states legal or race only- off road use versions. Headers
are manufactured with polished T304SS stainless and/or T409SS ceramic coated for
protection and finish. Intake kits come with a high flow open element filter complete with
all necessary hardware for a hassle free installation. Braces are manufactured with mild
steel for strength and powder-coated for a quality durable finish and solid one piece designs are used
whenever possible to provide the maximum chassis rigidity. All parts are engineered, dyno tested for performance (where applicable), and
come with an industry standard one year warranty. DC Sports has always been first and foremost about performance and value but there
is also no other product that has the DC Sports look, feel, and quality.
In 2004, DC Sports was purchased by Advanced Engine Management (AEM), a leading
manufacturer of performance parts specializing in air induction and electronics for
the Sport Compact and Truck/SUV Markets. AEM continued the strong DC
Sports tradition of producing the very best exhaust products and
developed an even stronger connection to motorsports for
the brand.
Pilot Automotive entered the picture in 2007
when it purchased the aftermarket assets
and intellectual property of DC Sports from
AEM. Pilot is one of the largest accessory
and performance product suppliers to the
automotive and truck markets. Pilot owns
a number of well known brands such as
Pilot, Red Line, APC, Bully, and VPS (Vehicle
Performance Systems).
DC Sports has a comprehensive global
distribution network and is headquartered in City of
Industry, California. For more information or any questions on
DC Sports, visit us at www.dcsports.com or call (626) 968-5147. The DC
Sports brand will always stand for the very best in performance!
© Cover image courtesy of HONDA TUNING MAGAZINE. Used with permission.
2
TABLE OF
CONTENTS
04
HEADERS
4-15
RACE HEADER
6
4-2-1 ONE PIECE
7
4-2-1 TWO-PIECE
8
3-1 9
K-SWAP10
TURBO MANIFOLDS
11
COMPETITION PIPE
11
AIR FILTERS
17
AIR INTAKES
18
COLD AIR
SHORT RAM
18
19
EXHAUST
24
SINGLE CANISTER EXHAUST, DUAL TIP 25
SINGLE CANISTER
25
DUAL CANISTER
26
UNIVERSAL MUFFLERS
27
SILENCERS27
STRUT BARS
UPPER STRUT BARS
UNDER BRACE BARS
30
30
31
, CA
nwillow
2010, Butto
3
HEADER SYSTEMS
DC Sports header systems are dyno tested to outperform all comparable header
systems on the market. Extensive research and development goes into each
system to ensure the best performance for your vehicle. We precision-bend our
headers on our CNC mandrel benders, using data acquired from our non-contact
digitizing scanner. Our flanges are CNC machined, we machine-grind the flange mating
surface to ensure a leak-free seal and use a robotic welder to attach the flange to the header
pipes. Our state-of-the-art manufacturing process ensures superior quality and a perfect fit
with every header system we make.
DC Sports headers are available in 100% T-304-stainless steel, and/or in T-409 stainless
steel with a proprietary temperature and corrosion-resistant ceramic coating. We thermally
degrease and sandblast our headers to prepare the surface for coating adhesion, and handpaint them to ensure an even application. After verifying the proper thickness of the coating,
the header is cured for proper bonding of the ceramic coating and then fine-blasted for a
high-luster finish.
BIFURCATION
DC Sports has three 50-state legal header designs: A race-inspired 4-into-1 design that
optimizes mid to top-end power, a lightweight, one-piece 4-2-1 design that provides
maximum ground clearance and emphasizes low to mid-range power for street/drag
applications, and a two-piece 4-2-1 design for easy installation and unmatched low to midrange power.
Our “Race-Only” headers come in 4-into-1 and 4-2-1 designs, and our turbo manifolds and
competition pipes for O.E.-equipped turbocharged vehicles are 100% stainless steel. Please
refer to the application chart for more information on design and material availability.
MACHINED FLANGES
PRECISION WELDS
For up to date CARB legality information and application fitment please contact us at [email protected] / (626) 968-5147 or your local authorized dealer
4
4-1 HEADER SYSTEMS
In 1987, American Honda commissioned DC Sports to develop a header for SCCA-prepped CRXs.
What culminated was our first 4-into-1 header design, and it was so well received that Honda
requsted headers for other applications. That system (HHC5002) is the one that started it all.
KEY FEATURES
• Dyno tuned and tested against the competition for
maximum performance
• CAD-rendered, race-inspired 4-into-1 design emphasizes
top-end power for road racing applications
• 50 state legal or pending legality
• Available in 100% T304 polished stainless steel (including
flanges), or T409 stainless steel with ceramic coating
• CNC mandrel bends with welded fittings deliver
perfect fit
• Equal length primary piping ensures optimum tuning
for more power across rpm range
• Unique merge collector design ensures
smooth exhaust gas flow
• Comprehensive installation instructions, all
necessary hardware and decals included
The merge collector in our 4-into-1 systems feature a
unique trapezoidal design that is proven to effeciently
expedite exhaust gas flow by virtually eliminating
turbulence. This design also improves ground clearance
by allowing us to offset the top and bottom header piping.
5
RACE HEADER SYSTEMS
ONE-PIECE DESIGN IMPROVES
GROUND CLEARANCE!
Whether you drag race, road race, set land speed records or drift, DC Sports Race headers
delivers the power you need to finish first. Our Race headers deliver unrestricted power
through extensive tuning and by eliminating the catalytic converter(s) for all-out performance.
KEY FEATURES
• Race headers eliminate catalytic converter for minumum restriction
• Dyno tuned and tested against the competition for maximum performance
• CAD-rendered design eases installation
• Available in 100% T304 polished stainless steel (including flanges),
or T409 stainless steel with ceramic coating
• For Off-Road use only
6
4-2-1 HEADER SYSTEMS
ONE-PIECE DESIGN IMPROVES
GROUND CLEARANCE!
DC Sports 4-2-1 one-piece header systems deliver incredible low- to mid-range power gains,
while improving ground clearance and reducing weight by eliminating the middle flanges. Our
4-2-1 one-piece headers are much lighter than stock systems and are on average two-pounds
lighter than our two-piece systems.
KEY FEATURES
• One-piece design reduces weight by eliminating middle flanges
• Unique merge collector design improves ground clearance
• 50-state legal or pending legality
• Equal length primary piping ensures optimum tuning for more power across rpm range
• Comprehensive installation instructions, all necessary hardware and decals included
• CAD-rendered, drag-inspired 4-2-1 design emphasizes low and mid-range power for
street/strip applications
• Available in 100% T304 polished stainless steel (including flanges), or T409 stainless
steel with ceramic coating
• CNC mandrel bends with robotically-welded fittings deliver perfect fit
For up to date fitment application please contact us at (626) 968-5147 or [email protected]
7
4-2-1 HEADER SYSTEMS
TWO-PIECE DESIGN FOR EASY
INSTALLATION, LOW END TORQUE
FOR STREET OR TRACK
DC Sports 4-2-1 two-piece header systems delivers the same performace as our
one-piece systems in a two piece design that eases installation. Our 4-2-1 two-piece
header was rated “Best of the Test” in peak power, peak torque and average power gain
by Sport Compact Car magazine.
KEY FEATURES
• CAD-rendered, design with threaded flanges for easy installation
• 4-2-1 design emphasizes low and mid-range power for street/strip applications
• CNC mandrel bends with welded fittings deliver perfect fit
• CNC-machined flanges and O-ring seals eliminate leaks
• Available in 100% T304 polished stainless steel (including flanges), or T409
stainless steel with ceramic coating
• Equal length primary piping ensures optimum tuning for more power across
the rpm range
• Comprehensive installation instructions, all necessary hardware
and decals included
• 50-state legal or pending legality
8
3-1 HEADER SYSTEMS
The increase of V6 applications in the sport compact market provided an
opportunity to design V-engine headers, and we responded with our 3-into-1
header designs. You will not find a 3-into-1 header system that fits as perfectly or
performs as well as DC Sports’ offerings.
KEY FEATURES
CERAMIC COATING PROCESS
DC Sports’ proprietary ceramic coating is
the best in the business. Once our systems
are complete, they are subjected to a
thermal degrease and preliminary sandblast
to prep the surface for adhesion. Each
system is hand painted and once the proper
thickness of the coating is verified, it is
cured in ovens and fine-blasted to a high
luster finish.
• 3-into-1 design emphasizes a broad increase in power across RPM range
for street/track applications
• 50 state legal or pending legality
• Available in 100% T304 polished stainless steel (including flanges), or T409 Alloy
with ceramic coating
• CNC mandrel bends with robotically welded fittings deliver perfect fit
• Equal length primary piping ensures optimum tuning for more power across
the rpm range
• Unique merge collector design ensures smooth exhaust gas flow
• Comprehensive installation instructions, all necessary
hardware and decals included
9
K-SWAP HEADERS
Got a K20A2 in your EK or second-gen Integra and need a header? Don’t
waste money on a custom header for your engine-swapped Honda or
Acura when you can get guaranteed performance and a perfect fit with DC
Sports Hybrid headers!
KEY FEATURES
• Direct-Fit headers install with no modifications
• Dyno tuned and tested for maximum performance
• Available in mild steel with ceramic coating
• CNC-machined and threaded flanges eliminate leaks
• Equal length primary piping ensures optimum tuning of system
for more power across rpm range
• Comprehensive installation instructions, all necessary
hardware and decals included
10
TURBO MANIFOLDS
DC Sports Turbo Manifolds
are the perfect upgrade
for customers looking
to extract the most
power from their factory
turbocharged vehicle.
Because of the high
temperature demands of
turbo applications, we use
special manufacturing techniques
to virtually eliminate the chance of failure,
including perparing the plasma cut materials for
welding, using a slower weld process and thicker rod for deeper weld penetration and purging the
inner tube sections with Argon gas to strengthen the backside of the welds.
KEY FEATURES
• Direct-Fit headers install with no modifications
• Dyno tuned and tested for maximum performance
• Available in mild steel with ceramic coating
• CNC-machined and threaded flanges eliminate leaks
• Equal length primary piping ensures optimum tuning of system for more power
across rpm range
• Comprehensive installation instructions, all necessary hardware and decals included
COMPETITION PIPES
DC Sports Competition Pipes delete the catalytic converter to eliminate
restriction in the exhaust path and are dyno tuned to deliver incredible
performance gains for your factory turbocharged vehicle.
11
CERAMIC HEADER APPLICATIONS
MAKE /MODEL
YEAR
PART#
PRODUCT
DESCRIPTION
APPLICATION
NOTE
CARB APPROVED
50 STATE LEGAL*
X = Yes
ACURA
INTEGRA RS/LS/GS
90-91
AHC6003
4-2-1 CERAMIC HEADER, TWO PIECE
X
INTEGRA RS/ LS/ GS/ GS-R
92-93
AHC6005
X
INTEGRA RS/ LS/ GS
94-01
AHC6006
X
INTEGRA GS-R
94-99
AHC6007
X
TSX
04-08
AHC6016
X
INTEGRA GS-R
94-99
AHC6507
4-2-1 CERAMIC HEADER, ONE PIECE
X
INTEGRA GS-R
00-01
AHC6511
X
RSX TYPE-S
02-06
AHC6514
X
RSX BASE
02-06
AHC6515
X
INTEGRA TYPE-R
97-01
AHC6604
4-1 CERAMIC HEADER, ONE PIECE
X
INTEGRA RS/ LS/ GS
94-01
AHC6606
X
INTEGRA GS-R
94-99
AHC6607
X
INTEGRA GS-R
00-01
AHC6611
CL 3.2L
99-03
HHC5528
TWO 3-1 CERAMIC HEADERS
A/T Only
X
CL TYPE S
01-03
HHC5528
A/T Only
X
TL 3.2L
99-03
HHC5528
A/T Only
X
TL TYPE S
01-03
HHC5528
A/T Only
X
CAVALIER
95-05
CHC3002
2.2L Ecotec
Pending
COBALT
05-10
CHC3002
2.0L & 2.4L
Pending
COBALT SS
05-07
CHC3002
Supercharged 2.0L
Pending
HHR
06-11
CHC3002
2.2L
Pending
MALIBU / CLASSIC
97-05
CHC3002
2.2L
Pending
95-99
MHC4001
2.0L
Pending
X
CHEVY
EAGLE
TALON ESI
HONDA
CIVIC SI
02-05
AHC6515
X
CIVIC DX/ LX/ EX/SI
88-91
HHC5002
X
CRX DX/ SI
88-91
HHC5002
PRELUDE SI
92-96
HHC5008
PRELUDE VTEC
92-96
HHC5009
ACCORD DX/ LX/ SE
90-93
HHC5011
PRELUDE S
92-96
HHC5011
SOHC
X
ACCORD DX/ LX/ SE
94-97
HHC5012
2 Bolt Converter Flange Only
X
CIVIC DX/ LX/ EX/ SI
92-95
HHC5013
X
CIVIC EX ONLY
96-00
HHC5013
X
DEL SOL S/ SI
93-97
HHC5013
X
PRELUDE TYPE SH
97-01
HHC5014
X
PRELUDE BASE
97-01
HHC5015
X
ACCORD EX
90-93
HHC5016
X
ACCORD EX
94-97
HHC5017
4 Cyl.
X
ACCORD LX/ EX
98-02
HHC5018
excl. ULEV/LEV/TLEV
X
CIVIC EX ONLY
01-05
HHC5019
S-2000
00-09
HHC5020
2.0 & 2.2
X
ACCORD LX / EX
03-07
HHC5022
excl. ULEV/LEV/TLEV
4cyl
X
FIT
07-08
HHC5023
PRELUDE VTEC
92-96
HHC5029
2.5'' Collector
Pending
CIVIC SI
99-00
HHC5504
X
DEL SOL VTEC
94-97
HHC5504
X
92-95
HHC5513
X
CIVIC EX ONLY
96-00
HHC5513
X
X
DOHC, Non-VTEC
X
X
X
X
*NOTES: For up to date CARB legality information and application fitment please contact us at [email protected] / (626) 968-5147 or your local authorized dealer
X
CERAMIC HEADER APPLICATIONS (CONT.)
MAKE /MODEL
YEAR
PART#
PRODUCT
DESCRIPTION
APPLICATION
NOTE
CARB APPROVED
50 STATE LEGAL*
X = Yes
HONDA (CONT.)
DEL SOL S/ SI
93-97
HHC5513
X
CIVIC SI
06-11
HHC5524
2DR / 4DR
Pending
ACCORD
98-02
HHC5528
A/T Only
X
CIVIC SI
99-00
HHC5604
DEL SOL VTEC
94-97
HHC5604
DOHC
X
92-95
HHC5613
M/T Only
X
CIVIC EX ONLY
96-00
HHC5613
M/T Only
X
DEL SOL S/ SI
93-97
HHC5613
M/T Only
X
G35 COUPE
03-07
NHC4201
2 door
X
G35 SEDAN
03-06
NHC4201
4 door Incl. AWD
X
FX35
03-08
NHC4201
M35
06-08
NHC4201
G35 SEDAN
07-08
NHC4202
4 door
Pending
G37 COUPE
08-13
NHC4202
2 door
Pending
G37 SEDAN
09-13
NHC4202
4 door
Pending
ECLIPSE RS/ GS
95-99
MHC4001
2.0L
Pending
LANCER
08-10
MHC4005
FED Version Only
Pending
350Z
03-06
NHC4201
X
350Z
07-08
NHC4202
Pending
370Z
09-13
NHC4202
Pending
240SX
91-94
NHC4203
KA24DE(DOHC)
Pending
VERSA
07-12
NHC7042
1.8L
Pending
SENTRA
07-08
NHC7042
2.0L
Pending
99-04
CHC3002
2.2L
Pending
G5
07-09
CHC3002
2.2L & 2.4L
Pending
GRAND AM
99-05
CHC3002
2.2L
Pending
SUNFIRE
95-05
CHC3002
2.2L
Pending
ION COUPE
04-07
CHC3002
2.2L
Pending
ION SEDAN
03-05
CHC3002
2.2L
Pending
xA / xB
03-07
SHC4401
xD
08-13
SHC4404
1.8L
Pending
ECHO
00-05
SHC4401
MATRIX
09-13
SHC4404
1.8L
Pending
COROLLA
09-13
SHC4404
1.8L
Pending
CELICA GT
00-05
THC4402
CELICA GT-S
00-03.3
THC4403
Non-Air Injection
Prod Dates 8/99 thru 3/03
X
MATRIX XRS
02-03.3
THC4403
Non-Air Injection
Prod Dates 8/99 thru 3/04
X
COROLLA
03-08
THC4405
C, LE, S no XRS
Pending
MATRIX XR
03-06
THC4405
2WD
Pending
YARIS
07-11
THC4407
Incl. S-Model
Pending
X
INFINITI
X
X
MITSUBISHI
NISSAN
OLDSMOBILE
ALERO
PONTIAC
SATURN
SCION
X
TOYOTA
X
X
13
STAINLESS STEEL HEADER APPLICATIONS
MAKE /MODEL
YEAR
PART#
PRODUCT
DESCRIPTION
APPLICATION
NOTE
CARB APPROVED
50 STATE LEGAL*
X = Yes
ACURA
NSX
91-94
ADP6009
ADAPTER FOR 91-94 MODEL
To Use with AHS6009
NSX
91-05
AHS6009
TWO 3-1 POLISHED S.S. HEADERS
91-94 Models Need
ADP6009
RSX TYPE-S
02-06
AHS6514
4-2-1 POLISHED S.S. HEADER, ONE PC
X
RSX BASE
02-06
AHS6515
X
INTEGRA RS/ LS/ GS
94-01
AHS6606
4-1 POLISHED S.S. HEADER, ONE PC
X
INTEGRA GS-R
94-99
AHS6607
X
X
HONDA
CIVIC SI
02-05
AHS6515
X
92-95
HHS5013
4-2-1 POLISHED S.S. HEADER, TWO PC
X
CIVIC EX ONLY
96-00
HHS5013
X
DEL SOL S/ SI
93-97
HHS5013
X
PRELUDE BASE
97-01
HHS5015
S-2000
00-09
HHS5020
2.0 & 2.2
X
4 Cyl.
X
ACCORD
03-07
HHS5022
CIVIC SI
99-00
HHS5504
X
DEL SOL VTEC
94-97
HHS5504
CIVIC SI
99-00
HHS5604
CIVIC SI
06-11
HHS5524
2DR / 4DR
DEL SOL VTEC
94-97
HHS5604
DOHC
X
92-95
HHS5613
M/T Only
X
X
DOHC
X
X
Pending
CIVIC EX
96-00
HHS5613
M/T Only
X
DEL SOL S/ SI
93-97
HHS5613
M/T Only
X
G35 COUPE
03-07
NHS4201
2 door
X
G35 SEDAN
03-06
NHS4201
4 door Incl. AWD
X
FX35
03-08
NHS4201
M35
06-08
NHS4201
G35 SEDAN
07-08
NHS4202
4 door
Pending
G37 COUPE
08-12
NHS4202
2 door
Pending
G37 SEDAN
09-13
NHS4202
4 door
Pending
INFINITI
X
X
NISSAN
350Z
03-06
NHS4201
X
350Z
07-08
NHS4202
Pending
370Z
09-13
NHS4202
Pending
DC SPORTS STAINLESS STEEL HEADERS are constructed of full stainless steel including the flanges.
flashBack
2010, Buttonwillow, CA
DC SPORTS RACE HEADERS APPLICATIONS
MAKE /MODEL
YEAR
PART#
PRODUCT
DESCRIPTION
APPLICATION
NOTE
CARB APPROVED
50 STATE LEGAL
INTEGRA TYPE-R
94-01
AHC6612
4-1 CERAMIC RACE HEADER, ONE PIECE
2.5" Collector
Race use only
RSX TYPE-S
02-06
AHR6514
4-2-1 CERAMIC RACE HEADER, ONE PIECE
INTEGRA
94-01
AHR6516
4-2-1 CERAMIC “K SERIES SWAP”
RACE HEADER, ONE PIECE
K20A2
Race use only
INTEGRA TYPE-R
94-01
AHS6612
4-1 POLISHED S.S.
RACE HEADER, ONE PC
2.5" Collector
Race use only
RSX TYPE-S
02-06
ASR6514
4-2-1 POLISHED S.S.
RACE HEADER, ONE PC
Race use only
RSX BASE
02-06
HHR6515
Race use only
ACCORD
94-97
AHR6516
K24
Race use only
CIVIC/ CRX
88-91
AHR6516
K20A2
Race use only
CIVIC
92-95
AHR6516
K20A2
Race use only
CIVIC
96-00
AHR6516
K20A2
Race use only
CIVIC EX ONLY
01-05
HHR5019
CIVIC
96-00
HHR5514
CX/DX/HX/LX
Race use only
CIVIC SI
06-11
HHR5523
4-2-1 CERAMIC RACE HEADER
K20Z3 Recommended for use
with SCS7034
Race use only
CIVIC SI
99-00
HHR5604
4-1 CERAMIC COATED RACE HEADER, ONE PC.
2.5" Collector
Race use only
DEL SOL VTEC
94-97
HHR5604
4-1 CERAMIC COATED RACE HEADER, ONE PC.
2.5" Collector, DOHC
Race use only
CIVIC SI
02-05
HHR6515
K20A2
Race use only
CIVIC SI
06-11
HSR5523
4-2-1 POLISHED S.S. RACE HEADER
K20Z3 Recommended for use
with SCS7034
Race use only
03-06
HHR4501
V6 A/T&M/T(5&6 Speed)
Race use only
00-04
MHR4003
4-2-1 CERAMIC RACE HEADER
2.4L
Race use only
SENTRA SE-R/ SPEC. V
02-05
NHR4202
4-2-1 CERAMIC RACE HEADER,
THREE PIECE
Race use only
240SX
95-98
NHR4205
Race use only
tC
05-10
SHR4402
2.4L
Race use only
xB
08-12
SHR4403
2.4L
Race use only
tC
11-13
SHR4405
2.5L
Race use only
xB
08-12
SSR4403
4-2-1 POLISHED S.S. RACE HEADER, ONE PIECE
2.4L
Race use only
tC
05-10
SSR4402
4-2-1 POLISHED S.S. RACE HEADER, ONE PIECE
2.4L
Race use only
FRS
12-13
SSR7049
4-1 POLISHED S.S. RACE HEADER, ONE PIECE
2.0L
4-1 CERAMIC RACE HEADER, ONE PIECE
2.0L
4-1 POLISHED S.S. RACE HEADER, ONE PIECE
2.0L
ACURA
Race use only
HONDA
Race use only
HYUNDAI
TIBURON
MITSUBISHI
ECLIPSE RS/ GS
NISSAN
SCION
SUBARU
BRZ
12-13
SSR7049
Race use only
Race use only
Race use only
NOTES: DC SPORTS RACE HEADERS are for off road use only. DC SPORTS RACE HEADERS are NOT C.A.R.B approved.
flashBack
2011, DC SPORTS
Headquarters, CA
15
DC SPORTS TURBO MANIFOLDS & COMPETITION PIPES
MAKE /MODEL
YEAR
PART#
PRODUCT
DESCRIPTION
APPLICATION
NOTE
12-14
HCD5526
POLISHED S.S. CAT-DELETE
Primary
GENESIS COUPE
09-13
HCD6602
POLISHED S.S. DUAL CAT-DELETE
6 Cyl.
GENESIS COUPE TURBO
09-13
HDP6601
POLISHED S.S. TURBO DOWNPIPE
4 Cyl, Turbo
EVOLUTION X
08-13
MCD6011
LANCER RALLIART
09-13
MCD6011
EVOLUTION VIII, IX
03-07
MDP6010
EVOLUTION X
08-13
MIP6011
POLISHED ALUMINUM UPPER INTERCOOLER HARD
PIPE KIT
LANCER RALLIART
09-13
MIP6011
POLISHED ALUMINUM UPPER INTERCOOLER HARD
PIPE KIT
EVOLUTION VIII, IX
03-07
MTM6007
POLISHED S.S. TURBO MANIFOLD
240SX w/SR20DET
89-98
NDP4203
S13/S14/S15 Motor
240SX w/SR20DET
89-98
NTM4203
S13/S14/S15 Motor
92X- AERO
05-06
SDP4301
92X- AERO
05-06
STH4301
92X- AERO
05-06
STU4301
POLISHED S.S. TURBO UP-PIPE
FRS
13-Up
SCD7049
FRS
13-Up
SOP7049
POLISHED S.S. OVER PIPE
BRZ
13-Up
SCD7049
WRX/ WRX STi
02-07
SDP4301
HONDA
Civic EX, LX
HYUNDAI
MITSUBISHI
NISSAN
SAAB
SCION
SUBARU
WRX SEDAN
08-13
SDP4302
4DR.
WRX WAGON
08-13
SDP4302
5DR.
WRX STi
08-13
SDP4302
5DR.
2.5L
LEGACY GT
05-09
SDP4302
BRZ
13-Up
SOP7049
POLISHED S.S. OVER PIPE
WRX/ WRX STi
02-07
STH4301
WRX SEDAN
08-13
STH4301
4DR.
LEGACY GT
05-09
STH4301
2.5L
WRX/ WRX STi
02-07
STU4301
WRX WAGON
08-13
STU4301
5DR.
WRX STi
08-13
STU4301
5DR.
NOTES: DC SPORTS STAINLESS STEEL TURBO MANIFOLD & COMPETITION PIPES are constructed of full stainless steel including the flanges.
flashBack
16
allenge
2008, Grand-Am’s Koni Ch
CARB APPROVED
50 STATE LEGAL
UNIVERSAL AIR FILTERS
PROVIDING A BREATH OF
FRESH POWER
KEY FEATURES
NO RUBBER CONSTRUCTION!
• The top and base are resistant to deterioration and tearing.
• Base is spun into a velocity stack radius to provide improved airflow.
• The Aluminum is not susceptible to heat cracking.
• Housing is resistant to damage in a backfire condition.
• Promote the harmonics and provide a more aggressive intake tone.
• The Aluminum is lighter than rubber by 30%.
• The bonding agent is over 100% stronger than rubber.
Aluminum housing for strength
and durability.
Stainless Steel wire mesh is
corrosion resistant which will
enhance the life and appearance
of the filter.
Extra deep filter pleats increase
filter surface area, improving
filtration while maximizing flow.
Synthetic Micronic Cloth
element is completely washable
and reusable.
One-piece velocity stack base
improving the volume and flow
characteristics.
17
SHORT RAM
• Designed for maximum power gains
• Increases horsepower and torque
• Improves throttle response
COLD AIR
• Re-locates filter to outside the engine compartment for
cooler air ingestion
• Designed for maximum power gains
• Increases horsepower and torque
• Improves throttle response
• Provides lower air intake temperatures to the engine
• Tuned inlet pipe for optimum performance gains
• Comes in a multi-piece kit for ease of installation (where necessary)
18
• Provides performance and value
• Easy to install in the engine bay
• Air intake velocity is greatly increased
AIR INTAKE SYSTEMS
PROVIDING A BREATH
OF FRESH POWER
DC Sport Air Intake Systems provide the best of both worlds in heat
protection and improved breathability. Every kit includes a air filter that
requires no oil, therefore no chance in contaminating the mass air flow
sensor which can result in loss of power and higher fuel consumption.
KEY FEATURES
Filter Intake Tube:
• One piece aluminum alloy construction.
• Corrosion resistant.
• Power coated for durability.
Entire Unit:
• No modifications necessary, direct bolt on.
• Improves throttle response.
• Increases horse power without increasing fuel consumption.
• Cuts OE intake system weight by more than half.
• Keeping with the intent design of OE, but making it more efficient.
Air Filter:
• No oil necessary for filtration, therefore no chance in contaminating the Mass Air Follow
Sensor which can result in loss of power and higher fuel consumption.
• Washable and reusable.
• Filtration as small as one micron (0.00039 inch)
• Aluminum alloy construction, making it immune to corrosion.
• Built in velocity stack to dramatically increase air flow rates.
• Built in funnel top to direct air flow into the velocity stack.
• Stainless steel mesh to aid in strength and longevity of the filter filament.
1. Powder coated aluminum filter
intake tube
2. Performance filter
3. Silicon hoses
4. Hose clamps
5. Screws & washers
19
DC SPORTS SHORT RAM INTAKE SYSTEM
MAKE /MODEL
YEAR
PART#
PRODUCT
DESCRIPTION
APPLICATION
NOTE
CARB APPROVED
50 STATE LEGAL
X = Yes
ACURA
INTEGRA (ALL)
90-93
SRI6003
Short Ram Intake System uses DCF300 Filter
X
INTEGRA LS, RS
94-01
SRI6006
X
RSX TYPE-S
02-06
SRI6514
X
RSX
02-06
SRI6515
ILX
13-Up
SRI7048
Pending
03-05
SRI2101
X
12-13
SRI9001
CRV
02-04
SRI5010
FIT
07-08
SRI5023
X
DEL SOL
93-97
SRI5516
Pending
Civic DX,LX,EX,SI
92-95
SRI5516
X
Civic SI
06-11
SRI5524
X
Civic DX, LX, EX
06-11
SRI5525
X
Civic Si
02-05
SRI6516
X
Civic Si
12-13
SRI7048
Pending
2003
SRI4503
X
Base Model
X
DODGE
NEON SRT-4
FORD
FOCUS 2.0L; 4CYL.
S; SE; SEL;
Titanium Model only
Pending
HONDA
X
HYUNDAI
TIBURON 4CYL.
INFINITI
G35
03-07
SRI4201
Rectangular MAF
X
G35
03-06
SRI4201C
Circular MAF
X
G35
07-08
SRI4205
3.5L 306HP Dual Intake
X
LS430
04-05
SRI4500
GS300
06-08
SRI4601
IS250/ IS350
06-09
SRI4700
IS300
00-05
SRI4800
MAZDASPEED 3
07-10
SRI4106
MAZDA 3
10-12
SRI4107
Pending
Evolution VIII, IX
03-07
SRI6007
X
Lancer
08-12
SRI6013A
2.0L; 2.4L A/T
X
Lancer
08-12
SRI6013M
2.0L; 2.4L M/T
X
JUKE
11-13
SRI1208
Turbo
Pending
350Z
03-06
SRI4201
240SX
89-94
SRI4203
W/ SR20DET
240SX
95-96
SRI4204
w/ Heat Shield
X
350Z
07-08
SRI4206
Dual Intake
X
ALTIMA, 4CYL.
07-12
SRI4209
CARB Approved exl.
SULEV Model
X
ALTIMA, 6CYL.
07-12
SRI4210
CUBE
09-12
SRI7046
Auto CVT Tranny Only
Pending
LEXUS
X
X
MAZDA
Turbo
Pending
MITSUBISHI
NISSAN
Pending
X
NOTES: For up to date CARB legality information and application fitment please contact us at [email protected] / (626) 968-5147 or your local authorized dealer
DC SPORTS SHORT RAM INTAKE SYSTEM (CONT.)
MAKE /MODEL
YEAR
PART#
PRODUCT
DESCRIPTION
APPLICATION
NOTE
CARB APPROVED
50 STATE LEGAL
X = Yes
SCION
xA
04-07
SRI4400
X
xB
04-07
SRI4401
X
iQ
12-13
SRI4408
02-07
SRI4301
06-07
SRI4410
SUBARU
IMPREZA WRX / STI
X
TOYOTA
COROLLA XRS
NOTES: For up to date CARB legality information and application fitment please contact us at [email protected] / (626) 968-5147 or your local authorized dealer
flashBack
ceway, New Jersey
2013, Honda Day, ATCO Ra
ission.
G MAGAZINE. Used with perm
© Image courtesy of HONDA TUNIN
DC SPORTS - COLD AIR INTAKE SYSTEM
MAKE /MODEL
YEAR
PART#
PRODUCT
DESCRIPTION
APPLICATION NOTE
CARB APPROVED
50 STATE LEGAL*
X = Yes
ACURA
CL
01-03
CAI5527
Cold Air Intake System uses DCF300 Filter
Pending
TL
02-03
CAI5527
Pending
TL
04-08
CAI5529
X
INTEGRA LS, RS
94-01
CAI6006
X
INTEGRA GS-R
94-01
CAI6007
X
TSX
04-08
CAI6016
TSX V6
10-12
CAI6017
CAI converts to SRI
X
TSX
09-10
CAI6018
2.4L
Pending
INTEGRA TYPE-R
97-01
CAI6604
X
ILX
13-Up
CAI7048
Pending
COBALT SS ECOTEC
05-07
CAI3002
SS Supercharged
COBALT ECOTEC
05-07
CAI3003
2.2L
SPARK
13-Up
CAI3004
Pending
11-13
CAI9000
Pending
Civic DX, LX, CX
96-00
CAI5013
X
PRELUDE
97-01
CAI5014
ACCORD 4CYL.
98-02
CAI5018
CARB Approved exl.
SULEV Model
X
Civic DX, LX, EX
01-05
CAI5019A
A/T
X
Civic DX, LX, EX
01-05
CAI5019M
M/T
X
S2000
00-05
CAI5020
S2000
06-09
CAI5021
ACCORD 4CYL.
03-07
CAI5022
CARB Approved exl.
SULEV Model
W/ MAF Sensor
X
FIT
07-08
CAI5023
M/T only
X
Civic EX, HX
96-00
CAI5513
Civic DX,LX,EX,SI
92-95
CAI5516
X
DEL SOL
93-97
CAI5516
Pending
Civic Si
06-11
CAI5524
Pending
Civic DX, LX, EX
06-11
CAI5525
X
ACCORD 6CYL.
98-02
CAI5528
X
ACCORD 6CYL.
03-07
CAI5529
X
ACCORD 4CYL.
08-12
CAI5530
Pending
Civic Si
99-00
CAI5604
Civic Si
02-05
CAI6516
X
Civic Si
12-13
CAI7048
Pending
TIBURON 6CYL
03-08
CAI4501
X
TIBURON 4CYL
04-08
CAI4502
X
TIBURON 4CYL
2003
CAI4503
X
ACCENT
12-13
CAI4504
1.6L; 4Cyl.
VELOSTER
12-13
CAI4504
1.6L; 4Cyl.
X
CHEVY
X
FORD
FIESTA
HONDA
X
X
X
X
X
DOHC B16A
HYUNDAI
KIA
FORTE KOUP
Pending
Pending
Pending
09-12
CAI3001
2.0L; 2.4L
Pending
MAZDASPEED 6
06-08
CAI4101
Turbo
X
6
03-08
CAI4102
CARB Approved exl.
SULEV Model
4 CYL
X
MAZDA
DC SPORTS - COLD AIR INTAKE SYSTEM (CONT.)
MAKE /MODEL
YEAR
PART#
PRODUCT
DESCRIPTION
APPLICATION NOTE
CARB APPROVED
50 STATE LEGAL*
X = Yes
MAZDA
6
03-08
CAI4103
V6 3.0L
3
04-09
CAI4105
2.0L, 2.3L
X
MAZDASPEED 3
07-11
CAI4106
Turbo
MX-5
06-09
CAI4108
2
11-13
CAI4109
X
X
M/T only
Pending
MITSUBISHI
ECLIPSE 4CYL
06-11
CAI4006
ECLIPSE GT
06-11
CAI4007A
A/T V6
X
X
ECLIPSE GT
06-11
CAI4007M
M/T V6
X
LANCER
02-06
CAI6001
M/T
X
LANCER RALLIART
04-06
CAI6002
M/T
X
VERSA
07-12
CAI1207
JUKE
11-13
CAI1208
Turbo
Pending
SENTRA SE-R SPEC-V
02-06
CAI4202
ALTIMA 4CYL
02-06
CAI4207
ALTIMA 6CYL
02-06
CAI4208
MAXIMA 6CYL
04-06
CAI4208
MAXIMA 6CYL
07-08
CAI4213
SENTRA
05-06
CAI4214
CARB Approved exl.
SULEV Model
1.8L
X
SENTRA
07-12
CAI4215
2.0L
X
xB
04-07
CAI4401
xD
08-11
CAI7043
xB
08-12
CAI7044
tC
11-13
CAI7050
tC
05-06
CAI4402
tC
07-10
CAI4403
02-07
CAI4301
YARIS S
07-09
CAI4407
CAMRY 4CYL
07-09
CAI4408
CAMRY 6CYL
07-09
CAI4409
MATRIX XR
05-08
CAI4412
NISSAN
X
X
CARB Approved exl.
SULEV Model
X
X
Rectangular MAF
X
X
SCION
SUBARU
IMPREZA WRX / STI
X
X
X
TOYOTA
DC SPORTS - REPLACEMENT AIR FILTERS
MAKE /MODEL
YEAR
PART#
INLET
PRODUCT
DESCRIPTION
APPLICATION NOTE
ALL
DCF250
2.50” Inlet
Dry Element No-Oil Replacement Air Filter
Base 6” Top 5” 6”W 6”H
UNIVERSAL
Universal
Universal
ALL
DCF275
2.75” Inlet
Base 6" Top 5" 6"W 6"H
Universal
ALL
DCF275S
2.75” Inlet
Universal
ALL
DCF300
3.00” Inlet
Universal
ALL
DCF275S
3.00” Inlet
Universal
ALL
DCF350
3.50” Inlet
Universal
ALL
DCF450
4.50” Inlet
EXHAUST SYSTEMS
DC Sports exhaust systems are CNC Mandrel bent from T304 stainless
steel, hand welded, feature a straight-through muffler core, includes solid
hangers that utilize the factory mounting locations and includes complete
hardware for ease of installation. We made a significant investment in
automated exhaust manufacturing equipment that enabled us to reduce the
cost of almost all of our exhaust system applications! You will not find a better
performing or fitting stainless steel exhaust system for the price.
KEY FEATURES
• Individually tuned and dyno-tested for maximum performance
• Uses factory mounting locations for ease of installation and
solid hangers for added durability
• Late model systems meet 95 dB exhaust noise
restriction requirements
• CNC mandrel bends with TIG welded fittings deliver perfect fit
• 304 Stainless-steel piping with TIG-welded,
CNC-machined flanges
• Straight-through muffler core maximizes power and delivers an
aggressive exhaust note
• Street-inspired design includes four-inch straight-cut tip with rolled
DC Sports logo
• Comprehensive installation instructions, all necessary hardware and
decals included
We use Flanges instead of slip joints to attach the exhaust piping for the best durability and to eliminate leaks.
Our hand Welding process ensures the best quality seams while reducing the overall cost of manufacturing.
We use Solid Hangers instead of hollow hangers for added strength.
HAND TIG WELDS
SOLID HANGERS
4” TIPS W/ DC
SPORTS LOGO
BOLTED FLANGES
24
SINGLE CANISTER EXHAUST, DUAL TIP
Due to certain fitment requirements and routing specifications, DC Sports manufactures a single canister, dual tip exhaust
system for the Nissan 350Z and other select applications.
Like all our engine breathing products, DC Sports exhaust
systems are dyno tuned and tested to outperform
all comparable systems on the market. Our
Single Canister, dual tip systems feature a
large, transverse-mounted polished oval
canister with dual straight-cut,
four-inch tips with rolled DC Sports
logos so there is no
mistaking whether you have the
best exhaust on the market.
SINGLE CANISTER EXHAUST
DC SPORTS race-inspired Dual Canister systems are available for V6
and select four-cylinder applications. Our Dual Canister systems
feature twin polished round barrel-style canisters that
deliver an aggressive growl through polished four-inch,
straight cut exhaust tips.
25
DUAL CANISTER EXHAUST
DC SPORTS race-inspired Dual Canister systems are available
for V6 and select four-cylinder applications. Our Dual Canister
systems feature twin polished round barrel-style canisters that
deliver an aggressive growl through polished four-inch, straight
cut exhaust tips.
26
UNIVERSAL MUFFLERS
DC SPORTS Universal Muffler designs adapt to virtually any vehicle and are available
in 2.5” and 3” diameters for naturally aspirated or turbo applications. Our Universal
Mufflers feature 100% 304 stainless steel construction, a straight-through perforated
muffler core for superior flow and a 4” straight cut exhaust tip with a rolled DC
Sports logo. It’s true DC quality for practically any application.
KEY FEATURES
• Available in 2.5 and 3 inch diameters for naturally aspirated and
turbo applications
• 100% polished 304 stainless steel barrel-style canister with
high-flow peforated core
• Polished four-inch straight-cut tip with rolled DC Sports logo
SILENCERS
DC SPORTS exhaust canister silencers fit inside the muffler
tip and baffle exhaust noise to reduce overall decibel
levels. Our silencers include a pre-drilled hole that
aligns with a pre-drilled hole in our muffler canisters and include all
necessary hardware for simple installation on the street and removal at the track.
KEY FEATURES
• Reduce exhaust decibel levels
• Simple installation and removal
• Available for most DC Sports exhaust with 4 inch tips
27
DC SPORTS STAINLESS STEEL EXHAUST SYSTEMS
MAKE /MODEL
YEAR
PART#
PRODUCT
DESCRIPTION
APPLICATION NOTE
ACURA
ILX
13-Up
SCS7051
Single Canister System, Stainless Steel Cat-Back Exhaust
4cyl.
INTEGRA GS/ LS /RS 2 DR.
94-99
SCS8008
*
INTEGRA GSR 2 DR.
00-01
SCS8008
*
INTEGRA TYPE-R
97-01
SCS8008
*
INTEGRA GSR 2 DR.
94-99
SCS8009
*
RSX TYPE-S
02-06
SCS8010
*
RSX BASE
02-06
SCS8011
*
05-08
SCS7033
2DR. & 4DR.
NEON SRT-4
03-05
DTS9101
Dual Tip Stainless Steel Cat-Back Exhaust System
*
CALIBER 1.8, 2.0 & 2.4L
07-09
SCS8017
Discontinued / Limited Qty Available
excl. Turbo and AWD Models
11-12
SCS9000
4dr. H/B *
CIVIC 2 DR. & 4 DR. ALL
92-95
SCS7020
No H/B *
CIVIC 2 DR. & 4 DR. EX
96-98
SCS7020
No H/B *
CIVIC EX/ SI
99-00
SCS7021
*
CIVIC EX 2 DR.
01-05
SCS7024
2 DR. Only *
CIVIC EX 4 DR.
01-05
SCS7025
4 DR. Only *
CIVIC LX, DX, VP, 2 DR.
01-05
SCS7027
2 DR. Only *
CIVIC LX, DX, VP, 4 DR.
01-05
SCS7028
4 DR. Only *
CIVIC SI
02-05
SCS7029
*
CHEVROLET
COBALT LS/ LT 2.2L ECOTEC N/A
DODGE
FORD
FIESTA
HONDA
CIVIC EURO R
02-05
SCS7032
Euro Spec EP3 CTR Only *
CIVIC SI COUPE
06-11
SCS7034
Recommended for use with HHR5523; 2DR. *
CIVIC SI
06-11
SCS7035
Single Canister System, Axle-Back Stainless Steel Exhaust
2DR. & 4DR. *
*
CIVIC EX/DX
06-10
SCS7036
FIT
07-08
SCS7037
*
CIVIC SI SEDAN
07-11
SCS7039
Superceded to SCS7035
4DR. *
CIVIC SI SEDAN
07-11
SCS7040
Recommended for use with HHR5523; 4DR. *
CIVIC SI
12-Up
SCS7048
2DR. & 4DR. *
03-06
DCS6501
Dual Canister System, Stainless Steel Cat-Back Exhaust
V6 *
4 Cyl. Coupe **
HYUNDAI
TIBURON GT
GENESIS COUPE TURBO
09-13
DTS6601
Dual Tip Exit, Stainless Steel Cat-Back Exhaust System
GENESIS COUPE 6 CYL.
09-13
DTS6602
6 Cyl. Coupe *
GENESIS COUPE TURBO
09-13
SCS6601
4 Cyl. Coupe **
10-13
SCS3001
*
07-10
SCS8020
Turbo *
KIA
FORTE KOUP
MAZDA
MAZDASPEED 3
MITSUBISHI
EVOLUTION X
08-13
DCS6011
**
LANCER RALLIART
09-13
DTS6012
**
EVOLUTION VIII, IX
03-07
SCS6010
**
EVOLUTION X
08-13
SCS6011
**
LANCER RALLIART
09-13
SCS6012
**
LANCER
08-11
SCS6013
*
NOTES: * Exhaust systems are compatible with SIL2500. Due to variations in certain applications some modifications may be necessary.
** Exhaust systems are compatible with SIL3000. Due to variations in certain applications some modifications may be necessary.
28
DC SPORTS STAINLESS STEEL EXHAUST SYSTEMS (CONT.)
MAKE /MODEL
YEAR
PART#
PRODUCT
DESCRIPTION
APPLICATION NOTE
350Z
03-08
SCS6205
Single Canister System, Stainless Steel Cat-Back Exhaust (Dual Exit)
With X Pipe *
370Z
08-12
SCS6206
Single Canister System, Stainless Steel Cat-Back Exhaust (Dual Exit)
With X Pipe *
CUBE
09-12
SCS7046
*
VERSA
07-12
SCS7042
5DR H/B *
07-09
SCS7033
05-06
SCS6301
**
FRS
12-13
DCS7049
*
xB
03-07
SCS6401
*
xA
03-07
SCS6402
*
tC
05-10
SCS6403
*
xD
08-13
SCS7043
Single Canister System, Stainless Steel Axle-Back Exhaust
*
xB
08-13
SCS7044
*
iQ
12-13
SCS7047
tC
11-13
SCS7050
NISSAN
PONTIAC
G5
SAAB
92X- AERO
SCION
*
SUBARU
BRZ
12-13
DCS7049
*
WRX/ WRX STi
02-07
SCS6301
**
WRX WAGON
08-11
SCS6302
5DR.
YARIS H/B
07-11
SCS7038
2DR. & 4DR. *
YARIS SEDAN
07-11
SCS7041
4DR. *
06-09
SCS4604
Turbo **
TOYOTA
VOLKSWAGEN
Golf GTI Mk V
flashBack
2008, Mitsubishi
EVO Challenge,
Buttonwillow, CA
DC SPORTS UNIVERSAL MUFFLERS & SILENCERS
MAKE /MODEL
MODEL
PART#
PRODUCT
DESCRIPTION
APPLICATION NOTE
Universal
6" Diameter Muffler Tank 22" Length
DCM2500
ROUND CANISTER MUFFLER, w/ 4" STRAIGHT TIP
2.5" Inlet Core *
Universal
DCM3000
ROUND CANISTER MUFFLER, w/ 4" STRAIGHT TIP
3.0" Inlet Core **
Universal
DCM2500S
ROUND CANISTER MUFFLER, w/ 4" Slant ANGLE TIP
2.5" Inlet Core *
Universal
DCM3000S
ROUND CANISTER MUFFLER w/ 4" SLANT ANGLE TIP
3.0" Inlet Core **
Universal
11” W x 7” H Diameter
Muffler Tank 26” Length
DCM4000
Oval Canister Muffler w/ 4" STRAIGHT BLUE TIP
2.5" Inlet Core
Universal
11” W x 7” H Diameter
Muffler Tank 26” Length
DCM4500
Oval Canister Muffler w/ 4" STRAIGHT BLUE TIP
3.0" Inlet Core
Universal
SIL2500
4" Silencer for Muffler w/ 2.5" Inlet Core
DC Muffler w/ 4" Tip Only
Universal
SIL3000
4" Silencer for Muffler w/ 3" Inlet Core
DC Muffler w/ 4" Tip Only
UNIVERSAL
NOTES: * Exhaust systems are compatible with SIL2500. Due to variations in certain applications some modifications may be necessary.
** Exhaust systems are compatible with SIL3000. Due to variations in certain applications some modifications may be necessary.
29
UPPER STRUT BARS
DC Sports upper strut bars reduce a vehicle’s chassis flex by connecting the vehicle
body at the shock towers for added torsional stiffness. Our strut bars vastly improve
a car’s road manners and handling characteristics, work with the factory suspension
components, and are ideal for road race applications or spirited drivers with
modified street vehicles.
KEY FEATURES
• Dual bar design with integrated steel brace virtually eliminates body flex for
improved handling and drivability (On certain applications, See listing)
• Mounts directly to strut tower with no modifications required
• Includes comprehensive instructions and all necessary hardware
• Titanium-Look grey powdercoat delivers lasting good looks
• Available for upper front and rear
30
UNDER BRACES
• Connects specific points of the undercarriage
to reinforce the chassis
• Solid one piece design for maximum rigidity
• Mild steel construction for strength
• Powder coated for a durable quality finish
• Reduces chassis flex and improves
torsion stiffness
• Improves vehicle handling and
drivability characteristics
• Monocoque design is highly rigid and
lightweight, chassis may be significantly
reinforced without adding too much weight.
31
DC SPORTS CARBON STEEL ‘’FRONT” STRUT TOWER BARS
MAKE /MODEL
YEAR
PART#
PRODUCT
DESCRIPTION
APPLICATION NOTE
Integra RS,LS,GS-R,Type-R
94-01
CSB1304
Front Carbon Steel Strut Bar
RSX Type-S
02-06
CSB2006
Single Bar
CAVALIER 2.2L
03-05
CSB2002
Single Bar
COBALT
05-09
CSB2004
Single Bar
NEON SRT-4
03-05
CSB1101
CHARGER SRT-8
05-10
CSB1102
6.1 HEMI V8
300C
03-10
CSB1102
Must remove Engine Cover
CHARGER
06-10
CSB1102
Must remove Engine Cover
CALIBER
07-10
CSB1103
2.0/2.4L Only; No SRT4 Turbo
95-99
CSB1004
Single Bar
CIVIC SI
99-00
CSB1304
CIVIC DX/ LX/ EX
92-95
CSB1315
CIVIC EX
96-00
CSB1315
DEL SOL S/ SI
93-97
CSB1315
CIVIC DX/ LX/ EX
01-05
CSB1318
FIT
07-08
CSB1319
CIVIC SI
02-05
CSB3019
S2000
00-09
CSB3020
ACCORD
03-07
CSB3022
Excl. 2 Dr. 6 Speed & Hybrid
ACCORD
08-12
CSB3023
4 Cyl.
TIBURON GT V6
03-08
CSB1501
Single Bar
GENESIS COUPE, 4 CYL. & 6 CYL.
09-13
CSB1502
Single Bar
ECLIPSE RS/ GS
95-99
CSB1001
2.0L
ECLIPSE RS/ GS
00-03
CSB1003
2.4L
ECLIPSE GST/ GSX
95-99
CSB1004
EVOLUTION X
08-13
CSB1006
Single Bar W/ Center Brace
LANCER RALLIART
08-13
CSB1006
Single Bar
LANCER
08-13
CSB1006
Single Bar
EVOLUTION VIII, IX
03-07
CSB6007
Tri-Point
240SX
89-94
CSB1205
240SX
95-98
CSB1206
VERSA
07-12
CSB1207
SOLSTICE
06-09
CSB2008
Single Bar
G5
07-09
CSB2004
Single Bar
05-06
CSB4301
Single Bar
xA, xB
03-07
CSB1401
tC
05-10
CSB1403
tC
11-13
CSB1408
xB
08-13
CSB1405
Single Bar
xD
08-13
CSB1406
Single Bar
FRS
13-Up
CSB1407
Single Bar
ACURA
CHEVROLET
DODGE
EAGLE
TALON
HONDA
Single Bar
HYUNDAI
MITSUBISHI
NISSAN
PONTIAC
SAAB
92X- AERO
SCION
32
DC SPORTS CARBON STEEL ‘’FRONT” STRUT TOWER BARS (CONT.)
MAKE /MODEL
YEAR
PART#
PRODUCT
DESCRIPTION
APPLICATION NOTE
BRZ
13-Up
CSB1407
Single Bar
WRX
02-07
CSB4301
Single Bar
WRX STi
02-07
CSB4301
Single Bar
WRX WAGON
08-13
CSB4302
5DR.
WRX SEDAN
08-13
CSB4302
4DR.
WRX STi
08-13
CSB4302
5DR.
COROLLA CE,S,LE
03-07
CSB1402
MATRIX XR
02-05
CSB1402
MATRIX XRS
02-05
CSB1402
YARIS
07-11
CSB1404
GOLF/ JETTA 1.8T
01-04
CSB1601
1.8T
GOLF/ JETTA 2.0
99.5-05
CSB1603
2.0L
SUBARU
TOYOTA
VW
DC SPORTS CARBON STEEL ‘’REAR” STRUT TOWER BARS
MAKE /MODEL
YEAR
PART#
PRODUCT
DESCRIPTION
94-01
CSB2310
Rear Carbon Steel Strut Bar
03-05
CSB2101
CIVIC
88-91
CSB2310
CIVIC 2DR. & 4 DR.
92-95
CSB2310
CIVIC 2DR. & 4 DR.
96-00
CSB2310
CRX
88-91
CSB2310
DEL SOL
93-97
CSB2310
03-08
CSB2501
ECLIPSE
00-04
CSB2007
ECLIPSE GST/ GSX
95-99
CSB2007
ECLIPSE RS/ GS
95-99
CSB2007
EVOLUTION VIII, IX
03-07
CSB6008
89-94
CSB2105
05-06
CSB4401
WRX
02-07
CSB4401
WRX STi
02-07
CSB4401
07-10
CSB2401
APPLICATION NOTE
ACURA
INTEGRA
DODGE
NEON SRT-4
HONDA
HYUNDAI
Tiburon GT
V6
MITSUBISHI
2.0L
NISSAN
240SX
4 Cyl.
SAAB
92X-Aero
SUBARU
TOYOTA
YARIS
33
DC SPORTS CHASSIS UNDER BRACES
MAKE /MODEL
YEAR
PART#
PRODUCT
DESCRIPTION
APPLICATION NOTE
FRS
13-Up
CUB1407A
Rear Lateral Sub Frame Brace
Two-Point, 1pc.
FRS
13-Up
CUB1407B
Rear Sub Frame Braces
Two-Point, 2pcs.
BRZ
13-Up
CUB1407A
Rear Lateral Sub Frame Brace
Two-Point, 1pc.
BRZ
13-Up
CUB1407B
Rear Sub Frame Braces
Two-Point, 2pcs.
SCION
SUBARU
DC SPORTS MISCELLANEOUS PARTS
MAKE /MODEL
YEAR
PART#
PRODUCT
DESCRIPTION
RHWA-002
30" O2 Sensor Extension, 4- Wire
RHWA-003
10.5" O2 Sensor Extension, 4- Wire
RHWA-004
58" O2 Sensor Extension, 4- Wire
RHWA-005
7.5" O2 Sensor Extension, 4- Wire
APPLICATION NOTE
HONDA
NISSAN
240SX
91-94
RHWA-006
O2 Sensor Extension, 1 Wire
K24DE
SENTRA SE-R/ SPEC. V
02-05
RHWA-007
O2 Sensor Extension, 4 Wire
2.5L
Crush-Ring Gasket
2 PC. Header
18212-SB2-961A
flashBack
2007, SEMA, Las Vegas
RACE NOTES
flashBack
2008, SEMA, Las Vegas
35
$6.00
www.dcsports.com
STREET & RACE HEADERS
AXLE & CAT
BACK EXHAUST
COLD AIR
& SHORT RAM
INTAKE
STRUT BARS
...and more!
CAT-1415DC
13000 Temple Ave.
City of Industry, CA 91746
Customer Service line 800. 237. 7560
Tech Support line 626. 968. 5147
Fax. 626. 937. 6993
www.dcsports.com
DC Sports (Pilot Automotive Group) reserve the right to change prices, applications and discontinue without advance notice.
DC Sports (Pilot Automotive Group) are not responsible for any typographical errors.
This catalog supersedes all previous catalogs. Possession of this catalog and or price sheet does not constitute ability to purchase items directly from us.
Some items are for race or off road use only. Not to be used on public roads.
Some items are C.A.R.B approved (50 state street legal) for use while others are legal only for states that do not follow CA emission standards (most states).
Some parts are not legal in the state of CA or other states adopting the same emissions standards. To know the status of a part number on your vehicle is legal or not please contact us at (626) 968-5147 or [email protected]
DC Sports is a registered trademark of the Pilot automotive Group. No use may be made of the text, photographs, or any other elements contained within this catalog without prior written consent from DC sports. All rights reserved.

- DC Sports

Transcription

Similar documents

COLD AIR INDUCTION SYSTEMS Add "B" for Blue, "R"