PDF - Repco Tyre Repair Products

Air Service Products
Catalogue 2014
Catalogue 2014
www.repcotrp.com.au
Phone: 1300 303 512
REPCO Tyre Repair Products
Now known as Repco Tyre Repair Products, the network of vans
has been servicing the Australian tyre repair market for over 38
years, specialising in the importation, stocking, distribution and
after sales support of products which are used in the Automotive
tyre repair industries.
With global brands such as Tech International, the world’s
leading producer of tyre and tube repairs and wheel service
solutions, Monaflex repair systems, Aerochemie, retreading
envelopes and regroovers, Repco Tyre Repair Products provides
a wide range of products and services including Repco branded air
tools and hydraulic jacks, plus leading brands of tubeless valves
and wheel weights.
Repco TRP is now owned by Repco a part of GPC, the Global leader
in aftermarket distribution. You will now benefit from greater
buying power, investment and leverage of their global experience,
plus Repco’s local wider range of products.
Page
2
www.repcotrp.com.au
AIR SERVICE PRODUCTS
RYCO Air Fittings
200 AUTOMATIC COUPLINGS
300
AUTOMATIC COUPLINGS
BSPP FEMALE
400 COUPLING NIPPLES
400 AUTOMATIC COUPLINGS
BSPP FEMALE
400 AUTOMATIC COUPLINGS
THREAD /BARB
1/4
3/8
1/2
PART NO
R420SF
R430SF
R440SF
THREAD /BARB
1/4
3/8
1/2
PART NO
R420SM
R430SM
R440SM
THREAD /BARB PART NO
1/4
R420PF
3/8
R430PF
1/2
R440PF
SCHRADER LONG R417A
BSPT MALE
HOSE BARB
BSPT MALE
THREAD /BARB
1/4
3/8
1/2
PART NO
R420PM
R430PM
R440PM
THREAD /BARB
1/4
5/16
3/8
1/2
PART NO
R420PH
R425PH
R430PH
R440PH
HOSE BARB
THREAD /BARB
1/4
5/16
3/8
1/2
PART NO
R420SH
R425SH
R430SH
R440SH
www.repcotrp.com.au
Page
63
AIR SERVICE PRODUCTS
Series 320 Cejn Air Fittings
HOSE CONNECTION
Part No.
DESCRIPTION
Connection
320 1003
Coupling Hose Barb
8 mm (5/16’’)
320 1004
Coupling Hose Barb
10 mm (3/8’’)
320 1005
Coupling Hose Barb
13 mm (1/2’’)
Male thread
Part No.
DESCRIPTION
Connection
320 1152
Coupling Male Thread
1/4’’
320 1154
Coupling Male Thread
3/8’’
320 1155
Coupling Male Thread
1/2’’
Female thread
Part No.
DESCRIPTION
Connection
320 1202
Coupling Female Thread
1/4’’
320 1154
Coupling Female Thread
3/8’’
320 1155
Coupling Female Thread
1/2’’
HOSE CONNECTION
Part No.
DESCRIPTION
Connection
320 5002
Hose Barb connection
6 mm (1/4’’)
320 5004
Hose Barb connection
10 mm (3/8’’)
320 5005
Hose Barb connection
13 mm (1/2’’)
Male thread
Part No.
DESCRIPTION
Connection
320 5152
Male Thread connection
6 mm (1/4’’)
320 5154
Male Thread connection
10 mm (3/8’’)
320 5155
Male Thread connection
13 mm (1/2’’)
Female thread
Part No.
320 5202
Page
64
DESCRIPTION
Female Thread connection
www.repcotrp.com.au
Connection
6 mm (1/4’’)
AIR SERVICE PRODUCTS
Nitto Hi Couplers
WILL PASS UP TO 70CFM @90PSI
PART No
SIZE
20sf
1/4 Female
30sf
3/8 Female
40sf
1/2 Female
20sM
1/4 Male
30sM
3/8 Male
40sM
1/2 Male
20sH
1/4 Barb
30sH
3/8 Barb
40sH
1/2 Barb
Nitto Adapters
USE FOR BOTH NITTO HI COUPLER AND ONE TOUCH
PART No
SIZE
20Pf
1/4 Female
30Pf
3/8 Female
40Pf
1/2 Female
20PM
1/4 Male
30PM
3/8 Male
40PM
1/2 Male
20PH
1/4 Barb
30PH
3/8 Barb
40PH
1/2 Barb
www.repcotrp.com.au
Page
65
AIR SERVICE PRODUCTS
Air Hose, Clamps & Hose Reel
H538 Series
58–1056
53-1802
Series
PART NO
DESCRIPTION
UOM
H538
HOSE CLAMP 9-12mm
BOX 10
H539
HOSE CLAMP 11-16mm
BOX 10
53-1802
9 mm (min) 11 mm (max)
EACH
53-1803
11 mm (min) 13 mm (max)
EACH
53-1804
13 mm (min) 15 mm (max)
EACH
53-1805
15 mm (min) 18 mm (max)
EACH
CAT NO.
FEATURES
58-1056
• High impact tough and durable polypropylene construction
• Fully enclosed weather resistant and UV stalilised outer case
protects the hose and inner drum assembly against dirt and other
contaminants
• Auto lock and rewind mechanism provides positive hose latching
every full revolution of the hose drum
• 15 m x 12.5mm Hose with 2 metre length leader hose with quality
brass fittings included as standard
• Heavy duty mounting bracket with fixed in-line or optional 180
degree swivel mount is suitable for wall or overhead mounting
• Convenient carry handle located on the top panel for removing and
refitting the hose reel from the mounting bracket
58–1034
CAT NO.
FEATURES
58-1034
•High impact tough and durable polypropylene construction
•Fully enclosed weather resistant and UV stalilised outer case
protects the hose and inner drum assembly against dirt and other
contaminants
•Auto lock and rewind mechanism provides positive hose latching
every full revolution of the hose drum
•20m x 10mm hose with 2 metre length leader hose with quality brass
fittings included as standard
•Heavy duty mounting bracket with fixed in-line or optional 180 degree
swivel mount is suitable for wall or overhead mounting
•Convenient carry handle located on the top panel for removing and
refitting the hose reel from the mounting bracket
30 06020
Page
66
PART NO
DESCRIPTION
UOM
30 06020
6mm I.D. AIR HOSE
20 METER ROLL
30 08020
8mm I.D. AIR HOSE
20 METER ROLL
30 10020
10mm I.D. AIR HOSE
20 METER ROLL
DSF/12.5
12.5mm I.D. AIR HOSE
20 METER ROLL
www.repcotrp.com.au
AIR SERVICE PRODUCTS
Air Tools
Reversible Air Drill 3/8” Drive (RAD330)
Air Ratchet Wrench 3/8” Drive (RARW2150 - A)
Air Ratchet Wrench 1/2” Drive (RARW2150 - B)
Feature and Benefits
✓✓Ergonomic handle grip reduces
fatigue, vibration and cold.
✓✓Aluminium casing.
✓✓Easy bit changing with Quick
Change Keyed Chuck 3/8” (10mm).
✓✓Variable speed trigger with one
hand forward/reverse lever.
✓✓Smooth operation with powerful,
efficient motor.
✓✓Reduced noise with handle
exhaust.
✓✓Suggested applications:
Drilling holes in steel, wood,
plastic and other surfaces.
Specifications
Average Air Consumption:
115 1/min (4.1 cfm).
Maximum Air Consumption:
465 1/min (16.4 cfm).
Maximum Speed @ 90psi: 2,200 rpm.
Inlet: 1/4” NPT.
Weight: 1.3 kg.
Length: 220 mm.
Chuck Capacity: 3/8” (10mm).
Feature and Benefits
✓✓360° Swivel Exhaust.
✓✓Built-In Regulator.
✓✓Light weight body provides super
power to weight ratio.
✓✓Lever trigger with safety catch.
✓✓Reversible head.
✓✓Suggested applications: For driving
and removing nuts and bolts.
Specifications
Free Speed: 180 rpm.
Average Air Consumption:
150 l/min (5.4 cfm).
Maximum Air Consumption:
610 l/min (21.6 cfm).
Maximum Torque @ 90 psi:
100 Nm (75 ft-lb).
Inlet: 1/4” NPT.
Weight: 1.22 kg.
Length: 265 mm.
Feature and Benefits
✓✓360° Swivel Exhaust.
✓✓Built-In Regulator.
✓✓Light weight body provides super
power to weight ratio.
✓✓Lever trigger with safety catch.
✓✓Reversible head.
✓✓Suggested applications: For driving
and removing nuts and bolts.
Specifications
Free Speed: 180 rpm.
Average Air Consumption:
150 l/min (5.4 cfm).
Maximum Air Consumption:
610 l/min (21.6 cfm).
Maximum Torque @ 90 psi:
100 Nm (75 ft-lb).
Inlet: 1/4” NPT.
Weight: 1.23 kg.
Length: 265 mm.
Air Angle Die Grinder 1/4” Drive (RADG1143)
30pc Angle Die Grinder Kit
(RADGK067)
Air Hammer 1/4” Drive (RAH720)
Feature and Benefits
✓✓Moulded grip reduces fatigue,
vibration and cold.
✓✓Heat treated parts for longer life.
✓✓Chrome Molybdenum Chisels.
✓✓Light weight body makes it ideal
for use in confined spaces.
✓✓Super power to weight ratio.
✓✓One piece spring.
✓✓Trigger operated.
✓✓Suggested applications: For
cutting, porting and deburring of
metal and other materials.
Specifications
Blows per minute @ 70 psi: 4500.
Chisel Mounting Length: 41mm (1-5/8”).
Average Air Consumption:
185 l/min (6.5 cfm).
Maximum Air Consumption:
735 l/min (26 cfm).
Maximum Operation Pressure: 70 psi.
Chisel Shank Diameter: 10.2 mm.
Inlet: 1/4” NPT.
Weight: 1.04kg.
Feature and Benefits
✓✓Ergonomic handle grip reduces
fatigue, vibration and cold.
✓✓Lightweight body made from
composite materials.
✓✓360° Swivel Exhaust.
✓✓Compact size for use in
confined areas with greater
manoeuvrability.
✓✓Super power to weight ratio.
✓✓Lever trigger with safety catch.
✓✓Suggested applications: For
grinding, sanding, porting and
deburring of metal and other
materials.
Specifications
Average Air Consumption:
120 l/min (4.3 cfm).
Maximum Air Consumption:
480 l/min (17 cfm).
Maximum Speed @ 90psi: 20,000 rpm.
Adjustable Regulator.
90° Drive.
Collet Size: 1/4”.
Inlet: 1/4” NPT.
Weight: 540 grams.
Length: 175 mm.
Kit Contents
Angle Die Grinder (RADG1143)
pictured left.
2 x Hand Wrenches.
1/8” and 1/4” Collet Chucks.
10 x Mounted Grinder Stones
(5 x 1/8”, 5 x 1/4”).
2 x Sanding Pads (50, 75mm).
2 x Sanding Disc Paper (50, 75mm).
2 x Stripping Disc (50, 75mm).
2 x Finishing Disc (50, 75mm).
2 x Round Bar 1/4”.
Inlet: 1/4” NPT.
Oil Pot.
Blow Moulded Case.
Specifications
Average Air Consumption:
120 l/min (4.3 cfm).
Maximum Air Consumption:
480 l/min (17 cfm).
Maximum Speed @ 90psi: 20,000 rpm.
Adjustable Regulator.
360° Swivel Exhaust.
Inlet: 1/4” NPT.
www.repcotrp.com.au
Air Impact Wrench
3/8” Dr (RIW124)
Feature and Benefits
✓✓Breakaway torque 680Nm
Mini Air Ratchet Wrench - 3/8”
Drive (RCRW951)
Feature and Benefits
✓✓Swivel Exhaust.
✓✓Built-In Regulator.
✓✓Light weight body provides super
power to weight ratio.
✓✓Ideal for use in confined spaces.
✓✓Lever trigger with safety catch.
✓✓Reversible head.
✓✓Suggested applications:
For driving and removing
nuts and bolts.
Specifications
Free Speed: 280 rpm.
Average Air Consumption:
170 l/min (6 cfm).
Maximum Air Consumption:
680 l/min (24 cfm).
Maximum Torque @ 90 psi:
45 Nm (35 ft-lb).
Inlet: 1/4” NPT.
Weight: 680 grams.
Length: 210 mm.
Mini Grease Gun
(RG105)
Feature and Benefits
✓✓Convenient for impact wrenches
and die grinders.
✓✓Use to lubricate air tool
mechanisms.
✓✓Polished chrome metal nozzle.
✓✓Visual indication for contents.
✓✓One handed operation.
Specifications
Capacity: 16cc. Length: 185mm.
Page
67
AIR SERVICE PRODUCTS
Air Tools
31’’ SHORT SHAFT
IMPACT WRENCH
1500ft/lbs
1’’ EXTENDED
IMPACT WRENCH
1500ft/lbs
KI-36
KI-36-6
LOW SPEED
TYRE BUFFER
HIGH SPEED BUFFER
AL-1320
AL-1213
BLOW VACUUM KIT
PT900-KIT
Page
68
www.repcotrp.com.au
AIR SERVICE PRODUCTS
Air Tools
Air Impact Wrench
1/2” Dr (50mm) Anvil
Air Impact
Wrench 1/2” Dr
Air Impact
Wrench 3/4” Dr
• Breakaway torque 1,625Nm
• Breakaway torque 1,625Nm
• Single handed operation
• Single handed operation
• Breakaway torque
2,440Nm
• 3 speed control
• 3 speed control
RIW3125
RIW260-2
RIW260
(RCIW2360)
Air Impact Wrench - 1/2” Drive
Free Speed: 7000 rpm.
Average Air Consumption:
225 l/min (8 cfm).
Maximum Air Consumption:
900 l/min (32 cfm).
Working Torque: 810 Nm (600 ft-lb).
Maximum Torque @ 90psi:
1290 Nm (950 ft-lb).
Inlet: 1/4” NPT.
Minimum Hose Size: 3/8” (10 mm).
Weight: 2.06 kg.
Length: 198 mm.
(RCIW2360 - 2)
Air Impact Wrench with
Extended 2” (50mm) Anvil
- 1/2” Drive
Free Speed: 7000 rpm.
Average Air Consumption:
225 l/min (8 cfm).
Maximum Air Consumption:
900 l/min (32 cfm).
Working Torque: 680 Nm (500 ft-lb).
Maximum Torque @ 90psi:
1150 Nm (850 ft-lb).
Inlet: 1/4” NPT.
Minimum Hose Size: 3/8” (10 mm).
Weight: 2.16 kg. Length: 248 mm.
3/4’’ EXTENDED
IMPACT WRENCH
750ft/lbs
3/4’’ SHORT SHAFT
IMPACT WRENCH
1100ft/lbs
KI-23-6
KI-30
(RCIW661)
(RIW460)
Air Impact Wrench
-3/4” Drive
Air Impact Wrench
-1/2” Drive
Free Speed: 4500 rpm.
Average Air Consumption:
320 l/min (11.3 cfm).
Maximum Air Consumption:
1275 l/min (45 cfm).
Working Torque: 1350 Nm (1000 ft-lb).
Maximum Torque @ 90psi:
1490 Nm (1100 ft-lb).
Inlet: 3/8” NPT.
Minimum Hose Size: 3/8” (10 mm).
Weight: 3.84 kg. Length: 240 mm.
Free Speed: 6500 rpm.
Average Air Consumption:
200 l/min (7 cfm).
Maximum Air Consumption:
790 l/min (28 cfm).
Working Torque: 610 Nm (450 ft-lb).
Max Torque @ 90psi: 680 Nm (500 ft-lb).
Inlet: 1/4” NPT.
Minimum Hose Size: 3/8” (10 mm).
Weight: 2.68 kg. Length: 185 mm.
3/4’’ H/D EXTENDED
IMPACT WRENCH
1100ft/lbs
KI-30-6
www.repcotrp.com.au
Page
69
AIR SERVICE PRODUCTS
Air Tools & Grinders
Cordless Tools
UG-65ER
TECHNICAL DATA
Throttle Handle
Sleeve Self Closing Lever
Capacity (Wheel Size)
63.5mm (2.1/2")
Max Free Speed
14,600 RPM
Overall length
271mm
Weight
1.25kg
Air Inlet
N.P.T 1/4
Air Hose size
10mm
Noise Level dbA
88
Cordless Impact Wrench
Variable Switch
FEATURES:
• Premium quality
• Variable speed
• 18 volt
• 539Nm torque
• Compact, lightweight and powerful
diecast aluminium gear-housing
• Ergonomic soft grip handle
• Powerful fan cooled motor
• Includes 2 x 3.0Ah Lithium
Ion batteries
• Weight 2.9kg with battery
1234567890
RCLIWV
CP7780-6 – Lightweight & Powerful
FEATURES:
• 1” straight impact wrench with 6” extended anvil
• 17 lbs – 7.7 kg thanks to an aluminum housing giving less
fatigue to the operator
• 1700 ft.lbs – 2320 Nm maximum torque in reverse
• Integrated protective cover on the clutch housing
• Twin hammer mechanism in oil bath
• Dedicated lever for forward & reverse
Cordless
Impact Wrench
Adjustable Torque
CP7782-6 – High torque & durability
FEATURES:
• 1” straight impact wrench with 6” extended anvil
• 2140 ft.lbs – 2900 Nm maximum torque in reverse
• Pinless closed reinforced rocking dog impact mechanism
• Socket retainer ring combined with hole retainer
• Ergonomic side handle
• Full teasing trigger
• Regulator with integrated forward/reverse with 3-position
power settings in both directions
Page
70
• Premium quality
• 6 adjustable torque
settings
• 18 volt
• 539Nm torque
• Compact, lightweight
and powerful
diecast aluminium
gear-housing
• Ergonomic soft grip handle
• Powerful fan cooled motor
• Includes 2 x 3.0Ah
Lithium Ion batteries
• Weight 2.9kg with battery
RCLIWA
www.repcotrp.com.au
1234567890
AIR SERVICE PRODUCTS
Air Tools CP
CP7763
CP7733
CP772 & CP772-6
FEATURES
FEATURES
FEATURES
• 3/4” Super duty impact wrench
• 1/2” Heavy duty impact wrench
• 3/4” Super duty impact wrench
• Twin hammer clutch
• CP’s patented SpringHammer clutch
• Pin clutch oil bath
• High Power: 1200 ft-lbs (1,627Nm)
• Low air consumption and high torque
• One handed push button
forward / reverse with 4 positive
power settings
• Ergonomic trigger and handle
• Compact size at only 11.6 lbs (5.3kg)
• Combined power regulator with
forward/
Max Torque 1200ft/lb - 1627Nm
Max Torque 550ft/lb - 746Nm
• CP772-6 6 inch extended anvil
Max Torque 1000ft/lb - 1356Nm
CP7733-2
Same features as CP7733
with 2" (51mm) extended
anvil
Same features as CP7763 with 6”
(152mm) extended anvil
CP749-2
CP749
CP-871
CP-873
FEATURES
• 1/2” Super duty
impact wrench
FEATURES
• CP’s patented
SpringHammer oil bath clutch
•A
djustable speed control
• CP749-2 2 inch extended anvil
• One handed push button forward /
reverse with 4 positive power settings
• Full power in reverse
• Compact design with comfortable
contoured handle
•H
igh speed tyre buffer
• J acob’s quality 3/8” (10mm)
chuck for holding buffing accessories
FEATURES
• High speed tyre buffer
• Adjustable speed control
• Quick change slip chuck
• L ock off throttle to prevent accidental
start up
• Lock off throttle to prevent accidental
start up
•R
ear exhaust
• Rear exhaust
22,000 RPM
2,800 RPM
Max Torque 625ft/lb - 827Nm
www.repcotrp.com.au
Page
71
Air service products
Air Gauges
VHJ667
VHJ6110
Code
Description
VH666
TREAD DEPTH GAUGE, 3 sides calibrated 0–1” in 1/32” black
VH667
MASTER SERVICE GAUGE. Precision instrument for testing accuracy
of tyre gauges and meters. Calibrated 10–120 psi in 2 lb. units.
VHJ6110
SWIVEL GAUGE designed for large bore valves. The head adjusts to
fit valves with shields, right angle or straight on. 2-sided nylon bar,
one side calibrated 10–150 psi in 2 lb. units. Other side kPa 80–1040.
VHJ6111
STRAIGHT-ON PENCIL GAUGE fits large and standard bore valves.
Designed to clip in shirt pocket. 4-sided nylon bar, 2 sides calibrated,20–120 psi in 2 lb. units. Other 2 sides kPa 150–800
Code
Description
VH660
AIR LIQUID TRACTOR GAUGE for air and liquid filled tyres. 4-sided
nylon bar, 2 sides calibrated 5-50 psi in 1 lb. units.Other 2 sides kPa
35-310.
VH661
STANDARD PASSENGER GAUGE, 4-sided nylon bar, 2 sides,calibrated
10–50 psi in 1 lb. units. Other 2 sides kPa 75–340.
VH663
LOW-LOW PRESSURE GAUGE, 4-sided nylon bar, 2 sides, calibrated
1–20 psi in /2 lb. units. Other 2 sides kPa 10–135
VHJ6111
VH666
VH663
VH661
VH660
VH669
Code
Description
VH664
DUAL FOOT TRUCK GAUGE, 4-sided nylon bar, 2 sides calibrated
20–120 psi in 2 lb. units. Other 2 sides kPa 150–810.
VH668
“STRAIGHT PUSH-ON 30° REVERSE ANGLE SERVICE GAUGE, for
standard bore valves. 2-sided nylon bar, one side calibrated 10–150
psi in 2 lb. units. Numbers at 10 lb. intervals.
Other side kPa 80–1040
VH669
“STRAIGHT PUSH-ON 30° REVERSE ANGLE TRUCK GAUGE, 4-sided
nylon bar, 2 sides calibrated 20–120 psi in 2 lb. units.
Other 2 sides kPa 150–810
Code
Description
VHP698
DUAL FOOT STRAIGHT PUSH-ON 30° REVERSE ,ANGLE LOCK-ON
CHUCK, tapered head design for a positive valve contact. Straight on
30° REVERSE angle chuck with threaded deep well lock nut which lock
on to valves when tilted 1/4”” female N.P.T 6”” - 150mm long
VH420C
Condor Brass Truck gauge 0-120PSI
VH668
VH664
VHP698
VH420C
VH900
ALG3J03
Code
Description
Code
Description
VH900
10 Coloured Pencil Gauge display card.
ALG3JO3
TDR 2000 Tyre Inflator, 0-138PSI, (0-960KPA)
Page
84
www.repcotrp.com.au
Air service products
Air Gauges
VH1950
VH1991
Code
Description
VH1976
Quicker Pressure Gauge 10-60 PSI
VH1991
Michelin Inflation Gauge Bar (0,7-12), PSI (10-174)
VH1930
Dial Gauge with swivel chuck suit both standard
and large bore valve
VH1950
Dial Gauge with dual foot chuck for standard bore
valves
Code
Description
11-0512
Digital Pro gauge
• Large LCD display screen powered by 2 x AAA alkaline batteries
(included)
11-0512
• High strength ABS fibreglass reinforced body
• Impact absorbing rubber protector with non-slip handle
• 500 mm rubber hose with clip-on swivel chuck
• 1/4” BSP male air Inlet thread
• Easy to use inflate trigger and deflate button
• ON / OFF button with LIGHT
• 4 function SCALE button with ZERO reset
• 0 – 160 p.s.i
• 0 – 11.03 bar
• 0 – 11.25 kg/cm
• 20 – 1103 kPA
11-0545
Code
Description
11-0545
Digital Automatic Tyre Inflator
• Aluminium die cast housing
• Mechanical anti-vandal buttons
• IP66 rated for indoor and outdoor use
• Large backlit LCD display with audible warning
• Comprehensive diagnostics and error reporting
• Accuracy ± 0.3 p.s.i.
• Units of measure: bar, p.s.i., kPa, kg/cm²
• Inflation range
• 0.5-10 bar
• 0-145 p.s.i.
• 0-1000 kPa
• 0-10 kg/cm²
• Inflates accurately with hoses up to 50 m long
• Flat tyre function
• Over pressure function
• Includes Nitto equivalent adaptor
www.repcotrp.com.au
Page
85
Air service products
Air Gauges
5131
Code
Description
5131
Large Bore thread depth gauge
• Two piece gauge made up of slide tube and indicator.
• Calibrated 0-6” in 1/32” units and 7 to 152 mm
• metric. Tubing spans tread lugs on off-road tyres.
Code
Description
N-1410
Off Highway tyre tread depth gauge
•
•
•
•
Indicating bar is calibrated with 32nds on one
side, other side is millimeters. Has magnified
sight-glass for easy readability. Comes with a
carrying holster. The finest instrument available.
N-1410
Code
Description
N-1420H
Truck tread depth gauge
•
•
•
•
•
•
N-1420H
Calibrated in millimeters and 1/32nds of an inch.
Measures shoulder wear as well as tread depth.
Durable metal construction, chrome-plated.
Comes in a clear protective plastic pouch.
Can be custom imprinted.
Pocket-size.
Code
Description
KCG
KEY CHAIN GAUGE, Large, easy to read LCD display. Automatic on
/ off (automatic shutt off thime: 1.5 seconds). Range: 10 - 60 PSI or
0.5 - 4.2 BAR.
Code
Description
TAC
12 V MINI AIR COMPRESSOR WITH CASE. Offers a preset auto stop
function. Operates from 12 Volt, 10 AMPS DC Power via a 12V cigarette lighter. Accessories: 2 Nozzle Adaptors, 1 Sports Needle, 320cm
Power Cord with Plug and 76 cm Air Hose.
KCG
TAC
Page
86
www.repcotrp.com.au
Repco Tyre Repair Products
Unit 2, 7 Kelham Place Glendenning, NSW 2761
Phone: 1300 303 512 Fax: (02) 9674 6229
Email: [email protected] www.repcotrp.com.au