Clarity™ Custom Print Glass Boards

CLARITY™Custom Print Glass
Dry Erase - Mounting Instructions
Required tools
1
A.
B.
C.
D.
E.
F.
G.
H.
Glass
Post
Cap
Washer
Anchor
Screw
Tray
Print
Requires 1 person to carefully hold glass in place,
and 1 person to mark holes (4X).
Hang vertically or
horizontally to
match desired print
(1 of 2)
INS622 REV A
F (4X)
B (4X)
C (4X)
A (1X)
G (2X)
D (8X)
H (2X)
E (4X)
2
Mount corner posts (4X)
Secure glass with caps.
F
C
D
B
E
D
CAUTION !
Plastic washers protect
both sides of glass
3
Carefully remove glass to
add or change print.
Remove bottom threaded
caps and washers first.
Post and washer
Threaded cap
and washer
CAUTION !
Hold glass in place
while removing caps.
Iceberg Enterprises, LLC
08/14
www.icebergenterprises.com
Customer Service
Tel: (800) 580-1310
CLARITY™Custom Print Glass
Dry Erase - Mounting Instructions
2 sample prints
included
Design your own custom print
Choose from a variety of
online templates available:
The week of
Mon
Mon
The week of
Wed
Mon
Wed
Fri
Wed
Fri
Sun
Fri
Sun
www.icebergcustomwhiteboards.com
4
(2 of 2)
INS622 REV A
Sun
Reference Chart
Glass Size
11 x 13.5”
13.5 x 19.5”
18.5 x 24.5”
24.5 x 36.5”
Paper Size
8.5 x 11”
11 x 17”
16 x 22”
22 x 34”
Place glass upside down on protective surface.
Open magnetic clips to attach print.
H
Magnetic clips hold
paper in place.
Protect glass surface
5
Carefully place glass on wall mounted posts.
Attach corner caps and washers.
6
Mount eraser and marker
tray on bottom edge.
A
G
Eraser sold
separately.
G
Iceberg Enterprises, LLC
08/14
www.icebergenterprises.com
Customer Service
Tel: (800) 580-1310